Over time, my usb port has become loose, to the extent that some cables just fall out with the slightest pressure.
I'm wondering if this is a common problem and if there is an easy fix? It looks like it may have slid inside a bit, but it may be meant to be like that - i have no idea what it was like originally!
Thanks
Related
My MicroUSB port feels loose when I plug in a cable, is there anybody else that has the same issue or is it just mine.
Mine is also a little loose, although it's not the physical microUSB port that's loose, just that the plug wobbles in the jack.
Yeah thats what I meant. I think motorola might have made the port shorter so it takes up less space but sticks out. My otg adapter always wiggles around a LOT. And it disconnects if I don't hold it in a certain direction
Just wondering if anyone else's usb cable is a little bit "shaky" after being plugged in? I guess it's normal since i don't have any poor contact issue so far, but ...it's kinda annoying..
Sorry if you didn't notice it before but you do now
ye my last android did that too. after using the micro usb port a few times it gets "shaky"-er haha
NIKEstickER said:
ye my last android did that too. after using the micro usb port a few times it gets "shaky"-er haha
Click to expand...
Click to collapse
ya all my phones with a micro usb port have eventually gotten this way...
futureaccount said:
Just wondering if anyone else's usb cable is a little bit "shaky" after being plugged in? I guess it's normal since i don't have any poor contact issue so far, but ...it's kinda annoying..
Sorry if you didn't notice it before but you do now
Click to expand...
Click to collapse
My Epic 4G Touch is the same exact way. However, I never had this issue with my Evo. Wonder if its an issue with the ports on Samsung phones.
I have found taking a pair of pliers and adding some slight pressure to the end of the usb cable has helped tighten things up. Make sure you are squeezing the entire connector and not using needle nose.
promiseofcake said:
I have found taking a pair of pliers and adding some slight pressure to the end of the usb cable has helped tighten things up. Make sure you are squeezing the entire connector and not using needle nose.
Click to expand...
Click to collapse
Its funny that you mention that because the looseness seems to be more dependent on the actual USB cable than the port itself (at least on this phone) Luckily, I haven't had any real connection problems with my phone. However, after replacing the cable, it seems to fit more snugly. Either way, its a little odd that it the same cable will seem more loose in this phone, but fit just fine in my previous one (still have it as a spare).
I've been having this problem lately also. Thinking in was a bug in the rom or a bad cable, the problem persists and its getting worse to the point it constantly will connect and disconnect repeatedly. I'm thinking its the phone because I've changed cables, usb ports and it still does it. But sometimes it will stick normally. Wierd...
If you have even tried brand new cables (since your existing ones may be worn out), then I would say that the port on the phone is likely damaged. Looks like it may be time for a service center repair.
My SR is the same way. The mini usb cocksoff to the right. I've experienced the same with a few Motos. I've came to the conclusion it is the cables themselves. I have noticed that the two teeth on the male plug get kind of wore out or not even pop back out and furthermore eventually damage the female port to where the phone will cycle from power to no power. I've especially seen this with OEM cables. I also saw a thread here where the guy gives an awesome, detailed breakdown of a screen replacement. The site he links has the replacement chip with the mini usb port if you feel froggy...
Hello XDA, here's something that has bugged me for a while.
I think everyone has experienced the tired out micro USB cable issue. You know, when the cable won't charge your device unless held at the proper angle, or when it won't even stay inside the device and just slips out. I believe this is caused by the little hook pins on the bottom of the plug getting a little bent or worn out.
This happens to me a lot. I operate heavy equipment all day and my phone is always bouncing around while charging. I think this bends the micro USB plug and I have to replace my micro USB cables like every couple months. Sometimes more.
So my question is, is this an issue with usb-c? I've searched online a lot and can't seem to find anything on it. This issue is a big deal to me since I'm pretty rough on my cables. Is it going to be a problem? Has anyone had this issue with a usb-c cable?
Thanks a ton everyone
,dratao
Sent from my LG-D852 using Tapatalk
troyhatchard said:
Hello XDA, here's something that has bugged me for a while.
I think everyone has experienced the tired out micro USB cable issue. You know, when the cable won't charge your device unless held at the proper angle, or when it won't even stay inside the device and just slips out. I believe this is caused by the little hook pins on the bottom of the plug getting a little bent or worn out.
This happens to me a lot. I operate heavy equipment all day and my phone is always bouncing around while charging. I think this bends the micro USB plug and I have to replace my micro USB cables like every couple months. Sometimes more.
So my question is, is this an issue with usb-c? I've searched online a lot and can't seem to find anything on it. This issue is a big deal to me since I'm pretty rough on my cables. Is it going to be a problem? Has anyone had this issue with a usb-c cable?
Thanks a ton everyone
,dratao
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
I would like to also ping this thread as I am wondering the same thing. My last 2 phones required me to start angling the cables so that they would charge (likely based on the wear and tear of inserting and removing the cables).
So, is the design of USB-C more, less or the same reliability as micro-USB from a port longevity perspective?
Hi guys!
I'm a fresh Pixel 2 user (and for now, I love the device), but a very strange thing occurred to me. I unboxed the phone, connected the cables to transfer the data from my old Nexus, and everything went smoothly, the cable connected easily and firmly. When I came home and wanted to connect the charger I noticed I can't push the USB-C cable in - it was getting stuck before being pushed completely, and the phone wouldn't charge. I looked closely into the charging port thinking that maybe some small debris was locked inside, but instead I've seen a crooked metal brace (closeup photo attached, the part was really small) that seemed loose and was blocking the connector to go fully inside. I didn't know what it was, but I used a toothpick to try to lock it in place or at least see if it's really loose, but upon touching it simply came out from the port and hit the floor.
The port now works flawlessly, it charges, it connects to the computer, nothing seems lose, the cable sits tight, and it looks perfectly normal to me. I checked some other USB-C devices I have if they have similar metal thing inside, but none does. The port now looks like all other USB-C ports I've seen.
I wouldn't expect anything to come out of the charging port in a new phone though. Would you have any idea what's the purpose of this metal brace in the Pixel's port, and what could've happened that it got detached from the port? Should I be worried or just throw it into the bin and forget?
I'd appreciate any clues and insights
Thanks!
M.
This looks like half of the metal usb shield inside your port. If you look deep inside there should be another half (or maybe it's fallen out). The purpose of this part is purely to reduce electrical noise at the point of the connector, so you shouldn't really see any charging issues with it out, although you may run into the occasional data transfer issue.
Thanks, that's reassuring I don't really see the second half, but everything is working smoothly so I will not be too bothered then.
Keep the part. The phone is faulty. If you don't have problems, wait until the warranty is nearly out and then RMA the phone to get a 'new' one
This exact thing just happened to my Pixel 2 phone. I hope I don't have any problems. I know this is an old post. Did it ever cause you any problems?
maticomp said:
Hi guys!
I'm a fresh Pixel 2 user (and for now, I love the device), but a very strange thing occurred to me. I unboxed the phone, connected the cables to transfer the data from my old Nexus, and everything went smoothly, the cable connected easily and firmly. When I came home and wanted to connect the charger I noticed I can't push the USB-C cable in - it was getting stuck before being pushed completely, and the phone wouldn't charge. I looked closely into the charging port thinking that maybe some small debris was locked inside, but instead I've seen a crooked metal brace (closeup photo attached, the part was really small) that seemed loose and was blocking the connector to go fully inside. I didn't know what it was, but I used a toothpick to try to lock it in place or at least see if it's really loose, but upon touching it simply came out from the port and hit the floor.
The port now works flawlessly, it charges, it connects to the computer, nothing seems lose, the cable sits tight, and it looks perfectly normal to me. I checked some other USB-C devices I have if they have similar metal thing inside, but none does. The port now looks like all other USB-C ports I've seen.
I wouldn't expect anything to come out of the charging port in a new phone though. Would you have any idea what's the purpose of this metal brace in the Pixel's port, and what could've happened that it got detached from the port? Should I be worried or just throw it into the bin and forget?
I'd appreciate any clues and insights
Thanks!
M.
Click to expand...
Click to collapse
luisenriquereyes said:
This exact thing just happened to my Pixel 2 phone. I hope I don't have any problems. I know this is an old post. Did it ever cause you any problems?
Click to expand...
Click to collapse
No, everything was fine with the phone afterwards - at least for that reason. I had to RMA it for failing display though after few months of use, so I no longer have that particular one. With the replacement the metal brace is still intact.
Hi all,
It's been two years I have been using my Z5 Compact, and the MicroUSB connector is hardly usable now.
I of course tried several cables.
It is very difficult to charge the telephone. I don't know exactly what the problem is. I tried cleaning with a dry air bomb (for keyboards etc.), but to no avail. Seems like a bad contact.
Is it possible to use electrical parts liquid cleaner to properly clean the USB contacts?
Anybody having the same experience?
MF
I had the same problem, usb cable didn't fit in entirely.
Culprit was a piece from the inside of my jeans pocket was pushed deep inside my usb port. It was pretty much stuck in there but once I got it out the problems where solved and I switched to magnetic usb cable to prevent this.
I got it out using very tiny pliers and a magnifying loupe.
Hope this helps..
Regards
Mine is going to die sometime, soon, too! i already bought a new one on ebay, laying ready to be installed here! In a couple of days i´ll take a hair dryer and then i´ll peel of the back cover and replace that broken connector
update: 17th of june!
Just wanted to tell you guys, it worked! I just replaced the USB Connector with the one i bought on Ebay, price was around 4 Euro or so, not much i think
It was rather easy, as i already own the needed tools (a very very small philips screw driver, and a tool to go underneath the back cover and a hairdryer)
took about 20 minutes or less!
Just use the hairddryer to heat up the back cover, then use the special tool (or a thin knife?) to loose the back cover and peel it off
then you have to remove 2 screws on the lower part, then you can remove some sort of a "bar" over the usb connector! next you have to lift the "motherboard" on the lower part (yes it moves down to the usb connector) but first disconnect the usb connector! then pull out the broken usb, shove the new one in and do all the above in reverse order!