Database Info

MOD hboot 1.55 X920D Remove Red Text

You must be S-Off to do this
Just do in bootloader
1) fastboot oem rebootRUU
2) fastboot erase cache
3) fastboot flash zip firmware1.55MOD.zip -- in this point please wait a moment
4) fastboot reboot-bootloader
optional reboot in recovery for test
Important: The flash process halts at around 75% to 90% on phone screen! This is normal and a safety precaution!
The last few percent is the reboot, which is NOT happening automatically, so you get a chance to check the console output before
reboot to make sure it is safe to reboot!
note: if needed for another hboot just tell me
Update: 1.57 https://mega.co.nz/#!1Q9yCSrD!fNdHv3ISgIbbKGDl0ovRWCT25z9DuEksx_offKvdxzw

Great Work! Thanks man!

not working for me
cidnum: HTC__044
version-bootloader: 1.55.0000
version-main: 3.15.707.4
hbootpreupdate: 11

Rename the downloaded file to PL99IMG.zip which is place in ext-card and reboot to boot loader. It will install and work fine without any problems.

it says wrong cid, update fails

indrawib said:
it says wrong cid, update fails
Click to expand...
Click to collapse
You must be S-Off to do this

I've already S-OFF but it said like that.

Good working fine...Thanks..
Sent from my HTC One using XDA Premium 4 mobile app

victor0888 said:
You must be S-Off to do this
Just do in bootloader
1) fastboot oem rebootRUU
2) fastboot erase cache
3) fastboot flash zip firmware1.55MOD.zip -- in this point please wait a moment
4) fastboot reboot-bootloader
optional reboot in recovery for test
Important: The flash process halts at around 75% to 90% on phone screen! This is normal and a safety precaution!
The last few percent is the reboot, which is NOT happening automatically, so you get a chance to check the console output before
reboot to make sure it is safe to reboot!
note: if needed for another hboot just tell me
Update: 1.57 https://mega.co.nz/#!1Q9yCSrD!fNdHv3ISgIbbKGDl0ovRWCT25z9DuEksx_offKvdxzw
Click to expand...
Click to collapse
Dear,
I Fallow these step but following error.
target reported max download size of 1514139648 bytes
sending 'zip' (642 KB)...
OKAY [ 0.205s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 1.723s

[Q] Help to recovery Sensation after bad flash

Hello everyone.
I am hoping someone might be able to help me out.
I had been using the sensation for a while with the s-off bootloader with no problems.
Recently I tried to update it to see how it would work on the lolipop builds that are out.
I updated the recovery to 2.8.3.0 TWRP and tried to flash the rom.
It looked like it completeled normally but when I went to restart the phone it will only boot into the fastboot of the boot loader. I can not get it to boot into the rom or recovery.
I have tried to reflash the recovery using fastboot but get the following error:
FAILED (remote: image update error)
I used the command (fastboot flash recovery recovery.img) to try and flash a previous one that worked.
I can use fastboot to boot the recovery though and then it will load.
But when the recovery is loaded or by using the adb terminal I can not access any of the partitions.
It seems like the partition table is corrupted.
I have been trying to find a hboot to reflash but I also can not seem to use the command
fastboot OEM reboot RUU
That command gives me the following error
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) emmc_erase(1852): sd_write_sector failed!
OKAY [ 0.081s]
finished. total time: 0.082s
Currently the phone is on Firmware 3.33
s-off
hboot 1.27.110
Does anyone know where I might be able to find the firmware / hboot to reflash to see if that fixes the partitions on the phone?
Or any other way to fix this?
I am finding it hard to try and dig up files that have working links for this device anymore.
If I am not mistaken, reflashing the firmware should be able to fix it though.
I think I might need to find the RUU and just reflash back to stock and am waiting on the download for that as we speak. Just dreading going through and rerooting the phone again.
The wire part was really tricky.
Any help would be greatly appreciated.
Thank you for your time to read this.

TheArtiszan said:
Hello everyone.
I am hoping someone might be able to help me out.
I had been using the sensation for a while with the s-off bootloader with no problems.
Recently I tried to update it to see how it would work on the lolipop builds that are out.
I updated the recovery to 2.8.3.0 TWRP and tried to flash the rom.
It looked like it completeled normally but when I went to restart the phone it will only boot into the fastboot of the boot loader. I can not get it to boot into the rom or recovery.
I have tried to reflash the recovery using fastboot but get the following error:
FAILED (remote: image update error)
I used the command (fastboot flash recovery recovery.img) to try and flash a previous one that worked.
I can use fastboot to boot the recovery though and then it will load.
But when the recovery is loaded or by using the adb terminal I can not access any of the partitions.
It seems like the partition table is corrupted.
I have been trying to find a hboot to reflash but I also can not seem to use the command
fastboot OEM reboot RUU
That command gives me the following error
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 0
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) emmc_erase(1852): sd_write_sector failed!
OKAY [ 0.081s]
finished. total time: 0.082s
Currently the phone is on Firmware 3.33
s-off
hboot 1.27.110
Does anyone know where I might be able to find the firmware / hboot to reflash to see if that fixes the partitions on the phone?
Or any other way to fix this?
I am finding it hard to try and dig up files that have working links for this device anymore.
If I am not mistaken, reflashing the firmware should be able to fix it though.
I think I might need to find the RUU and just reflash back to stock and am waiting on the download for that as we speak. Just dreading going through and rerooting the phone again.
The wire part was really tricky.
Any help would be greatly appreciated.
Thank you for your time to read this.
Click to expand...
Click to collapse
Okay so the only good news I can see is that if you can make the RUU run it will not s-on your phone so rooting will be easy but, if fastboot oem reboot RUU doesn't work then your in alot of trouble. When you download the RUU (any I'd one for the sensation of XE will do) run it and then extract the .zip (search on Google if you are unsure how to) when you have that extract everything and then move system.img data.img and anything rom related out of the folder. Your aiming to only have hboot related items and the android txt file in there. Zip it back up by highlighting all the files and make a zip file, not by zipping the folder. Rename the zip file to the device model number with img (i think its pg58img.zip) then pass it to your sdcard and then reboot to hboot.
If your hboot can "update" it will hopefully be able to restore/remake your damaged partition table but if that fails your options are really limited. A J-tag would be able to restore the devices partition tables forcefully but you would need a repair shop to do that.
Sent from my LG-D802 using Tapatalk

heavy_metal_man said:
A J-tag would be able to restore the devices partition tables forcefully but you would need a repair shop to do that.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
or if you know what to do about jtag method see here
http://forum.xda-developers.com/showthread.php?t=2775115

Yeah I think I'm toast then.
I tried grabbing the default Rom .zip and flash with boot loader and that failed.
Not sure if it needed to be on a gold card or not though.

TheArtiszan said:
Yeah I think I'm toast then.
I tried grabbing the default Rom .zip and flash with boot loader and that failed.
Not sure if it needed to be on a gold card or not though.
Click to expand...
Click to collapse
Shouldn't make a difference as you are s-off.
What happens if you issue the command. Fastboot getvar all
Does it work?
Sent from my LG-D802 using Tapatalk

TUTO : Unbricking HTC one mini M4 by Mayafthecool

HOW TO UNBRICK HTC ONE MINI ( M4 )
Hello everyone I’m new in this forum and this my first TUTO so if you have any suggestion or question about this TUTO please comment it down
Firstly I’m not responsible of any damage even XDA but otherwise If you do exactly like I’m saying you will not get damage or re-brick your phone and some part of credit are gone to XDA members , GSMHOSTING Forum and 4PDA ( Russian’s forum) so I’m just assembling all threats that helped me to unbrick my phone and to make a full TUTO 
This Tuto has two parts
PART I ( UNBRICKING THE PHONE )
REQUIERMENTS
1) Firstly you must have a PC and a bricked phone
2) You can be S-ON or OFF ( that’s not matter )
3) You must use TWRP recovery (TWRP 2.7.0.5 here )
4) You must have a Nandroid backup ( if not you can also download one , link here)
5) And finaly you must have ADB and FAstboot tools ready on your computer ( link here )
6) And also a little knowledge about Android’s , ADB and Fastboot’s world
Lets begin !
1) Power up your phone into bootloader mode and then into fastboot mode
2) Flash the TWRP recovery and get into the recovery
3) Plug your phone on pc and still on the recovery
4) If you have your own nandroid backup just push it through ADB at /data/media/0/TWRP/BACKUPS/ and restore your phone.
5) if don’t have a nandroid backup please download it from the given link
and unzip it somewhere in your pc . Create 3 new folders and rename it as
1- folder 1: SH39HWA00635
2- folder 2 also : SH39HWA00635
3- folder 3: 2015-02-04--09-34-05
Now copy all the files that you unzipped before and paste them to the last folder
i.e.: folder N° 2015-02-04--09-34-05 must contain 7 files. like in the image
And after that copy folder (3) into folder (2) then Folder (2) into folder (1) like in the image
6) prompt command windows by holding “shift” and “right mouse click” somewhere in the ADB folder.
7) Now use this command
- adb push SH39HWA00635 /data/media/0/TWRP/BACKUPS/
wait few minutes while files are being copy
8) after the copy done unplug your phone and in the TWRP recovery , restore your phone
9) Now just do a wipe and reboot your phone
YOU JUST HAVE UNBRICKED YOUR PHONE :laugh:
PART II ( s-off and superCID )
it's not ready now , i have not assembled all files yet !

sorry for my bad english ^^ but don't hasitate to ask quation please

It worked
mayafthecool said:
HOW TO UNBRICK HTC ONE MINI ( M4 )
Hello everyone I’m new in this forum and this my first TUTO so if you have any suggestion or question about this TUTO please comment it down
Firstly I’m not responsible of any damage even XDA but otherwise If you do exactly like I’m saying you will not get damage or re-brick your phone and some part of credit are gone to XDA members , GSMHOSTING Forum and 4PDA ( Russian’s forum) so I’m just assembling all threats that helped me to unbrick my phone and to make a full TUTO 
This Tuto has two parts
PART I ( UNBRICKING THE PHONE )
REQUIERMENTS
1) Firstly you must have a PC and a bricked phone
2) You can be S-ON or OFF ( that’s not matter )
3) You must use TWRP recovery (TWRP 2.7.0.5 here )
4) You must have a Nandroid backup ( if not you can also download one , link here)
5) And finaly you must have ADB and FAstboot tools ready on your computer ( link here )
6) And also a little knowledge about Android’s , ADB and Fastboot’s world
Lets begin !
1) Power up your phone into bootloader mode and then into fastboot mode
2) Flash the TWRP recovery and get into the recovery
3) Plug your phone on pc and still on the recovery
4) If you have your own nandroid backup just push it through ADB at /data/media/0/TWRP/BACKUPS/ and restore your phone.
5) if don’t have a nandroid backup please download it from the given link
and unzip it somewhere in your pc . Create 3 new folders and rename it as
1- folder 1: SH39HWA00635
2- folder 2 also : SH39HWA00635
3- folder 3: 2015-02-04--09-34-05
Now copy all the files that you unzipped before and paste them to the last folder
i.e.: folder N° 2015-02-04--09-34-05 must contain 7 files. like in the image
And after that copy folder (3) into folder (2) then Folder (2) into folder (1) like in the image
6) prompt command windows by holding “shift” and “right mouse click” somewhere in the ADB folder.
7) Now use this command
- adb push SH39HWA00635 /data/media/0/TWRP/BACKUPS/
wait few minutes while files are being copy
8) after the copy done unplug your phone and in the TWRP recovery , restore your phone
9) Now just do a wipe and reboot your phone
YOU JUST HAVE UNBRICKED YOUR PHONE :laugh:
PART II ( s-off and superCID )
it's not ready now , i have not assembled all files yet !
Click to expand...
Click to collapse
First of all I wanted to say thanks for the tutorial it worked, however I did have to change the name of the first and second folders as depending on the region you are in the phone will have a serial number so just posting this to help other people who might be in the same situation. If twrp does not register that the backup is there it may be because the names of folder 1 and 2 doesn't match your devices serial number but thankfully theres an easy way to find out what your serial number is, simply boot into recovery mode and create a backup (even if you have no OS or anything on your device) then navigate to /data/media/0/TWRP/BACKUPS/ whilst in recovery mode and you will see a folder with an ID similar to SH39HWA00635 but not quite the same (in my case it was SH3BDWA01229) now go back on your computer and simply rename folders 1 and 2 with your serial number and push it to your device the same way you did before and twrp should now recognise it :laugh:

Thankx for this help @Johnny_hutson

Hello!
I'll try to flash twrp but this process is always filed
Code:
C:\adb>fastboot flash recovery twrp.img
target reported max download size of 800227328 bytes
sending 'recovery' (9282 KB)...
OKAY [ 1.271s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.213s
C:\adb>fastboot flash recovery twrp.zip
target reported max download size of 800227328 bytes
sending 'recovery' (9251 KB)...
OKAY [ 1.258s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.203s
My phone info:
Code:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.09.161.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3B4WA01428
(bootloader) imei: 355866057013604
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4297mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.360s
Sorry for my poor English.

KPblCbKA said:
Hello!
I'll try to flash twrp but this process is always filed
My phone info:
Sorry for my poor English.
Click to expand...
Click to collapse
Is your phone DEV unlocked?

Man, thank you so much. I was so close to throw my One mini into the recycle bin!
Did work great with the note from Johnny_hutson

Hello I am new here and I bricked my phone. I don't know what to do about it and I am don't know about Android
Sent from my TECNO P5 using XDA Free mobile app

in twrp no find file when i click restore can u help mee plz

FAILED when trying to flash recovery.img.
FAILED <remote: signature verify fail>
Other recoveries or advice?

Need help finding stock sprint recovery from nougat

Here's my issue. Some time back I installed TWRP in order to install the Pixel Launcher as a system app. When Nougat came out I tried to install the ota. No go. So I installed a stock recovery and relocked the bootloader. Still no luck. I've tried every way possible to install Nougat: ruu.exe, from sd card, flash through adb. Nothing.
I think my stock recovery is problematic. When I try and get into it through the bootloader I get the dreaded red triangle with exclamation mark. So I've tried two ways of extracting the recovery.img from the Nougat update. I've used process monitor and the trick of looking in %temp% after starting the ruu.exe. I get the correct size zip, but when I unzip, whether through 7zip or winzip, I just get a series of 22 smaller zips and have no idea where in all those the recovery image is hiding.
Anyone have any ideas what I'm doing wrong or where I can download the nougat recovery image for sprint?

revcp said:
Here's my issue. Some time back I installed TWRP in order to install the Pixel Launcher as a system app. When Nougat came out I tried to install the ota. No go. So I installed a stock recovery and relocked the bootloader. Still no luck. I've tried every way possible to install Nougat: ruu.exe, from sd card, flash through adb. Nothing.
I think my stock recovery is problematic. When I try and get into it through the bootloader I get the dreaded red triangle with exclamation mark. So I've tried two ways of extracting the recovery.img from the Nougat update. I've used process monitor and the trick of looking in %temp% after starting the ruu.exe. I get the correct size zip, but when I unzip, whether through 7zip or winzip, I just get a series of 22 smaller zips and have no idea where in all those the recovery image is hiding.
Anyone have any ideas what I'm doing wrong or where I can download the nougat recovery image for sprint?
Click to expand...
Click to collapse
The recovery isn't related to anything in the RUU process, it doesn't matter what version you have. If you want to upgrade from marshmallow to Nougat using a RUU you'll first need to update the firmware so your phone can read HTC's new digital signature, without doing that you'll always get signature errors when flashing the ruu. You can find the sprint RUU and firmware in my RUU collection thread (general section).
FYI, ruu are encrypted. You can't simply unzip these files. You need to decrypt using the correct decryption key.

Thank you. It's been a while since I've dived down into a phone. Is there a step by step on how to update the firmware?

So, tried to update the firmware. Here's the result (after doing the "fastboot oem rebootRUU" step):
D:\Android\platform-tools>htc_fastboot flash zip firmware2.18.651.2.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target reported max download size of 800000000 bytes
sending 'zip' (99604 KB)...
OKAY [ 4.927s]
writing 'zip'...
(bootloader) HOSD CL#747079
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) ERR ZIP signature checking failed...
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 8
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 8
(bootloader) [email protected]
FAILED (remote: 8 RU_SIGNATURE_FAIL )
finished. total time: 19.760s
htc_fastboot finished. total time: 19.925s

And now trying the .zip on root of sd method I get this after executing command:
8 RU_SIGNATURE_FAIL
8 RU_SIGNATURE_FAIL
FAIL8 RU_SIGNATURE_FAIL

revcp said:
So, tried to update the firmware. Here's the result (after doing the "fastboot oem rebootRUU" step):
D:\Android\platform-tools>htc_fastboot flash zip firmware2.18.651.2.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target reported max download size of 800000000 bytes
sending 'zip' (99604 KB)...
OKAY [ 4.927s]
writing 'zip'...
(bootloader) HOSD CL#747079
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) ERR ZIP signature checking failed...
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 8
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 8
(bootloader) [email protected]
FAILED (remote: 8 RU_SIGNATURE_FAIL )
finished. total time: 19.760s
htc_fastboot finished. total time: 19.925s
Click to expand...
Click to collapse
Sorry I thought your phone was S-OFF, this firmware package is decrypted so it can't be flashed on a S-ON phone. If you can find the 2.18.651.2 ota zip file, you can extract the signed firmware from it. (signed version can be flashed with S-ON). You should be able to get the ota file from your phone by selecting "download and install later". Once downloaded you can transfer the ota from your phone to your computer and extract the firmware.zip file from it using winrar / 7zip.

There's another thing I don't understand about this.
The FAQ directions in https://forum.xda-developers.com/one-a9/general/wip-ruu-htc-one-a9-t3240344 say to " rename the RUU zip file '2PQ9IMG.zip'". But there is no RUU zip file. There is RUU.EXE and the firmware zip file.

revcp said:
There's another thing I don't understand about this.
The FAQ directions in https://forum.xda-developers.com/one-a9/general/wip-ruu-htc-one-a9-t3240344 say to " rename the RUU zip file '2PQ9IMG.zip'". But there is no RUU zip file. There is RUU.EXE and the firmware zip file.
Click to expand...
Click to collapse
These instructions are for flashing ruu in zip format. how to flash.exe ruu explained just below.
.zip ruu can be extracted from the .exe version if needed (on some pc, a .exe ruu can be problematic, e.g. you double click the file to launch the process and nothing happen...)
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
Btw if you can share your firmware.zip extracted from the OTA it would be really nice for other Sprint users in the same situation. I wasn't able to find the Sprint ota zip file anywhere yet.

alray said:
Sorry I thought your phone was S-OFF, this firmware package is decrypted so it can't be flashed on a S-ON phone. If you can find the 2.18.651.2 ota zip file, you can extract the signed firmware from it. (signed version can be flashed with S-ON). You should be able to get the ota file from your phone by selecting "download and install later". Once downloaded you can transfer the ota from your phone to your computer and extract the firmware.zip file from it using winrar / 7zip.
Click to expand...
Click to collapse
That's what I need! Thanks! Any idea where the dl is saved on the phone? I should have noted that I was s-on. Sorry.

revcp said:
That's what I need! Thanks! Any idea where the dl is saved on the phone? I should have noted that I was s-on. Sorry.
Click to expand...
Click to collapse
For the M9 it was in data/data/com.htc.updater/files I guess it should be similar for the A9. Maybe someone else could confirm this...

Well, I'm dead in the water. I've tried every way possible to dl the ota, but when I go to /android/data/com/htc.updater/files there is nothing there. A 2.18.651.2 ota zip file is nowhere to be found. If anyone has that for spring I would love to get my hands on it.

Help please

Hi everyone, could you please help me i have a htc A9 and i face a bootloop . the phone hasn't the usb debugging on and it is S-on, i tried with fastboot to change the ruu but impossible always have failed in cmd prompt
Code:
(bootloader) kernel: lk
(bootloader) product: htc_hiaeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 751200000
(bootloader) serialno: HT5ARBE06603
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 352636071084888
(bootloader) version-main: 2.16.163.4
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PQ910000
(bootloader) cid: VODAP203
if someone has an idea i would appreciate coz i'm stuck
I tried to flash a rom using fastboot and i get this error message
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip 2PQ9IMG.zip
target reported max download size of 751200000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 1029804250 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 278606042 is not a multiple of the block size 4096
sending sparse 'zip' (733590 KB)...
error: write_sparse_skip_chunk: don't care size 1029804250 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1029804250 is not a multiple of the block size 4096
OKAY [ 32.033s]
writing 'zip'...
(bootloader) HOSD CL#853511
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_h
(bootloader) RvMuM
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 57.319s
thanks for your help

kabelou said:
Hi everyone, could you please help me i have a htc A9 and i face a bootloop . the phone hasn't the usb debugging on and it is S-on, i tried with fastboot to change the ruu but impossible always have failed in cmd prompt
Code:
(bootloader) kernel: lk
(bootloader) product: htc_hiaeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 751200000
(bootloader) serialno: HT5ARBE06603
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 352636071084888
(bootloader) version-main: 2.16.163.4
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PQ910000
(bootloader) cid: VODAP203
if someone has an idea i would appreciate coz i'm stuck
I tried to flash a rom using fastboot and i get this error message
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip 2PQ9IMG.zip
target reported max download size of 751200000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 1029804250 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 278606042 is not a multiple of the block size 4096
sending sparse 'zip' (733590 KB)...
error: write_sparse_skip_chunk: don't care size 1029804250 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1029804250 is not a multiple of the block size 4096
OKAY [ 32.033s]
writing 'zip'...
(bootloader) HOSD CL#853511
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_h
(bootloader) RvMuM
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 57.319s
thanks for your help
Click to expand...
Click to collapse
What ruu version are you trying to flash?
Are you using htc_fastboot.exe or fastboot.exe?

alray said:
What ruu version are you trying to flash?
Are you using htc_fastboot.exe or fastboot.exe?
Click to expand...
Click to collapse
i tried a lot of ruu, an european ruu, vodaphone uk, etc
the htc_fastboot command doesn't work coz it's an old version, i tried to find the newest one but i didn't.
And the fastboot.exe it's the last version in android sdk manager and it's the only thing working...i cannot found ruu with cid vodap203....the phone is from france so if you can help me thanks

kabelou said:
i tried a lot of ruu, an european ruu, vodaphone uk, etc
the htc_fastboot command doesn't work coz it's an old version, i tried to find the newest one but i didn't.
And the fastboot.exe it's the last version in android sdk manager and it's the only thing working...i cannot found ruu with cid vodap203....the phone is from france so if you can help me thanks
Click to expand...
Click to collapse
You must use htc_fastboot.exe to flash RUU not fastboot.exe . The only ruu version that will work on your phone is 2.16.163.4 check on easy-firmware.com it's there

alray said:
You must use htc_fastboot.exe to flash RUU not fastboot.exe . The only ruu version that will work on your phone is 2.16.163.4 check on easy-firmware.com it's there
Click to expand...
Click to collapse
Hello Alray,
i tried to download the RUU you said but its not possible becaus i have to pay for it? do you have any access or are you able to download it ? if not no worries and thanks for help!!!.

Flahable zip
Would you like a flashable zip of the htc one a9 boostmobile/sprint stock rom with root?

anonymouseli said:
Would you like a flashable zip of the htc one a9 boostmobile/sprint stock rom with root?
Click to expand...
Click to collapse
Am glad that you asked this, I know that this is a different thread but I have been looking for a nougat flashable zip, am using HTC One A9 sprint version 1.10.651.1 hiaewhl S-OFF and boot loader unlocked, it's rooted with twrp 2.8.7.0 installed..I just want to grab this opportunity. I need to update my phone to nougat and return to stock.. I saw RUU.exe but I realized that you will flash firmware first before RUU.exe ,I didn't see RUU.zip for hiaewhl and I have not use RUU before..help me out.. I need any rom I can flash through custom recovery.. Is it safe for me to flash custom rom for hiaeul on my hiaewhl being S-OFF and bootloader unlocked? Pls your reply..
Sent from my 2PQ93 using XDA-Developers Legacy app

CAMERON1988 said:
Am glad that you asked this, I know that this is a different thread but I have been looking for a nougat flashable zip, am using HTC One A9 sprint version 1.10.651.1 hiaewhl S-OFF and boot loader unlocked, it's rooted with twrp 2.8.7.0 installed..I just want to grab this opportunity. I need to update my phone to nougat and return to stock.. I saw RUU.exe but I realized that you will flash firmware first before RUU.exe ,I didn't see RUU.zip for hiaewhl and I have not use RUU before..help me out.. I need any rom I can flash through custom recovery.. Is it safe for me to flash custom rom for hiaeul on my hiaewhl being S-OFF and bootloader unlocked? Pls your reply..
Sent from my 2PQ93 using XDA-Developers Legacy app
Click to expand...
Click to collapse
You should be alright ill upload it tomorrow

anonymouseli said:
You should be alright ill upload it tomorrow
Click to expand...
Click to collapse
I will be grateful
Sent from my 2PQ93 using XDA-Developers Legacy app

Stock Rom Rooted
CAMERON1988 said:
I will be grateful
Sent from my 2PQ93 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Okay here is a link to download the rom becuase , i just finish uploading it and its around 4gbs or so.
https://anonfile.com/E1P1E7mdbb/TWRP_zip
Steps to recover
1) First thing you should do is extract the rom, DO NOT FLASH THE ZIP FILE !!! .
2)Delete any old twrp folders in your sd card or phone storage, dont worry it will not affect the recovery itself.
3))Put the twrp folder in your device or sd card, however you can transfer it, its better if its on an sd card(make sure the folder says twrp).
4)Turn off the device and reboot into recovery.
5)Afterwards format the entire phone (Dont use factorey reset, use format data)just make sure you dont delete anything from the sd card.
6) Next go into restore or backup whatever its called and restore the rom from your sdcard, it should automatically detect the folder and if it doesnt try choosing the folder manually.
7) reboot the phone and give it sometime and if doesn't boot up after 20 minutes delete the cache or factory reset.
8) let me know if you got any questions email: [email protected]
---------- Post added at 06:32 PM ---------- Previous post was at 06:30 PM ----------
anonymouseli said:
Okay here is a link to download the rom becuase , i just finish uploading it and its around 4gbs or so.
https://anonfile.com/E1P1E7mdbb/TWRP_zip
Steps to recover
1) First thing you should do is extract the rom, DO NOT FLASH THE ZIP FILE !!! .
2)Delete any old twrp folders in your sd card or phone storage, dont worry it will not affect the recovery itself.
3))Put the twrp folder in your device or sd card, however you can transfer it, its better if its on an sd card(make sure the folder says twrp).
4)Turn off the device and reboot into recovery.
5)Afterwards format the entire phone (Dont use factorey reset, use format data)just make sure you dont delete anything from the sd card.
6) Next go into restore or backup whatever its called and restore the rom from your sdcard, it should automatically detect the folder and if it doesnt try choosing the folder manually.
7) reboot the phone and give it sometime and if doesn't boot up after 20 minutes delete the cache or factory reset.
8) let me know if you got any questions email: [email protected]
Click to expand...
Click to collapse
w.
---------- Post added at 06:32 PM ---------- Previous post was at 06:32 PM ----------
anonymouseli said:
Okay here is a link to download the rom becuase , i just finish uploading it and its around 4gbs or so.
https://anonfile.com/E1P1E7mdbb/TWRP_zip
Steps to recover
1) First thing you should do is extract the rom, DO NOT FLASH THE ZIP FILE !!! .
2)Delete any old twrp folders in your sd card or phone storage, dont worry it will not affect the recovery itself.
3))Put the twrp folder in your device or sd card, however you can transfer it, its better if its on an sd card(make sure the folder says twrp).
4)Turn off the device and reboot into recovery.
5)Afterwards format the entire phone (Dont use factorey reset, use format data)just make sure you dont delete anything from the sd card.
6) Next go into restore or backup whatever its called and restore the rom from your sdcard, it should automatically detect the folder and if it doesnt try choosing the folder manually.
7) reboot the phone and give it sometime and if doesn't boot up after 20 minutes delete the cache or factory reset.
8) let me know if you got any questions email: [email protected]
Click to expand...
Click to collapse
w.

OK thanks a lot, I will download it when I subscribe to a data plan because there's no Wi-Fi here
Sent from my 2PQ93 using XDA-Developers Legacy app

I couldn't download the file as it is failing whenever it gets to 1.97Gb I have tried several times but still the same I have spent almost 7gb but couldn't still get it downloaded..I don't know whether the fault is from the link or not
Sent from my 2PQ93 using XDA-Developers Legacy app