Related
So i unlocked the bootloader and got CWM installed as my recovery. Any custom ROM i try to install from ZIP on SDCARD tells me that the package is for a different device. it says it is for xt926 and a few others.
I have a CDMA RAZR HD so im 100% sure this is the correct to install. I have tried Carbon and the CM11 with no success.
SlimKat will install but all i get is a looped boot screen (the M).
I was able to RSD it back to stock kitkat but now that i FINALLY was able to unlock i want to flirt with custom roms.
Any help or suggestions are welcome.
Thanks in advance
I made a topic about the same thing more or less. If I'm not mistake, Dhacker is working on a build of CWM that will allow one to flash any ROM on the stock bootloader. Currently, you can only flash stock ROMs on it.
jldr said:
I made a topic about the same thing more or less. If I'm not mistake, Dhacker is working on a build of CWM that will allow one to flash any ROM on the stock bootloader. Currently, you can only flash stock ROMs on it.
Click to expand...
Click to collapse
No, the ROMs need to be updated to work with the KK bootloader. You can use dhacker's CM11 test builds and not much else right now.
I was under the impression that CWM will flash ANY custom ROM. Bootloader never gets modded, only unlocked. I was thinking of trying TWRP but i had a harder time installing that recovery.\\
Thanks for responce
GOT IT.
So i was trying the epinter builds. Will this work:
cm-11-20140615-UNOFFICIAL-RAZR-HD_M-KITKAT-TEST.zip
I got this from http://androidhosting.org/Devs/Dhacker29/
killrhythm09 said:
No, the ROMs need to be updated to work with the KK bootloader. You can use dhacker's CM11 test builds and not much else right now.
Click to expand...
Click to collapse
Oh I see. Thanks for the reply.
divxdvd said:
GOT IT.
So i was trying the epinter builds. Will this work:
cm-11-20140615-UNOFFICIAL-RAZR-HD_M-KITKAT-TEST.zip
I got this from http://androidhosting.org/Devs/Dhacker29/
Click to expand...
Click to collapse
Yes, that will work.
divxdvd said:
I was under the impression that CWM will flash ANY custom ROM. Bootloader never gets modded, only unlocked. I was thinking of trying TWRP but i had a harder time installing that recovery.\\
Thanks for responce
Click to expand...
Click to collapse
Make sure you're using the latest version of CWM or TWRP also. Those are also in dhacker's folder.
I got the same error while trying CM11 from the Dhacker29 folder. I am on CWM v.6.0.4.8.
This package is for "moto_msm8960, xt907, xt926, vanquish.
Im installing the correct file with CWM installed from his folder.
I am not sure what i am doing wrong? Do i need TWRP?
divxdvd said:
I got the same error while trying CM11 from the Dhacker29 folder. I am on CWM v.6.0.4.8.
This package is for "moto_msm8960, xt907, xt926, vanquish.
Im installing the correct file with CWM installed from his folder.
I am not sure what i am doing wrong? Do i need TWRP?
Click to expand...
Click to collapse
You need a newer recovery like I edited into my last post. Either CWM 6.0.4.9 or TWRP 2.7.1.0.
YOU ARE AWESOME!!!
I got 6049 installed and then my phone took CM11 as well.
Very excited!!! I have been deprived of custom ROMs since i bought this phone 1.5 years ago... (STUPID LOCKED BOOTLOADER)
Back in business BABY!!!!
Awesome, glad you got it working.
Just be warned that there may be bugs since CM11 is still running on nightly builds and snapshots.
OK guys let me tell you about my issue's
I'm using TWRP 2.7.1.0 (Tried 2.7.0.2 no difference) S-off, Unlocked, latest firmware from Santods files. The phone works fine with Sense ROMS but for the life of me I can't flash a GPE ROM. They fail every time. Santod tried to help me out the best he could by having me replace the Boot.img from the ROM I was flashing thinking that I was on a secure Boot image (And I may be but I replaced it and they still won't flash). Mr. Jaydee82 also modified a ROM for me to try out (although I'm not sure exactly what he did to it) and it wouldn't Flash properly either. When I try to flash these ROMs it will appear to flash properly and then they will go to the bootscreen and just sit there and churn. Depending on the ROM some will time out and power down the device and some will just sit there forever until I do a virtual battery pull. I'm freaking desperate to find out what is going on with this device and I don't feel right bugging Santod so I decided to post this in hope of more ideas about what could possibly be going on with my device. Any and all help greatly appreciated!!!
Thanks!
Duckman_UF said:
OK guys let me tell you about my issue's
I'm using TWRP 2.7.1.0 (Tried 2.7.0.2 no difference) S-off, Unlocked, latest firmware from Santods files. The phone works fine with Sense ROMS but for the life of me I can't flash a GPE ROM. They fail every time. Santod tried to help me out the best he could by having me replace the Boot.img from the ROM I was flashing thinking that I was on a secure Boot image (And I may be but I replaced it and they still won't flash). Mr. Jaydee82 also modified a ROM for me to try out (although I'm not sure exactly what he did to it) and it wouldn't Flash properly either. When I try to flash these ROMs it will appear to flash properly and then they will go to the bootscreen and just sit there and churn. Depending on the ROM some will time out and power down the device and some will just sit there forever until I do a virtual battery pull. I'm freaking desperate to find out what is going on with this device and I don't feel right bugging Santod so I decided to post this in hope of more ideas about what could possibly be going on with my device. Any and all help greatly appreciated!!!
Thanks!
Click to expand...
Click to collapse
What did you use to s-off; firewater or sunshine? Are you able to flash/boot AOSP roms? Did you take the 1.55.605.2 OTA before?
krazie1 said:
What did you use to s-off; firewater or sunshine? Are you able to flash/boot AOSP roms? Did you take the 1.55.605.2 OTA before?
Click to expand...
Click to collapse
I used Firewater I'm able to Flash all of the Sense ROM's not sure if they are considered AOSP. Give me an example of one and I'll try it. I'm not 100% sure if I took the OTA update before I Rooted and S-offed/unlocked the device but I think I did. I Flashed Santods Nobootimg firmware via ADB to be sure I was on the latest firmware. I know my radios were up to date before doing this but I wasn't sure about the FW so I flashed it. Flashed fine, didn't need to flush again, flashed fine first time.
Duckman_UF said:
I used Firewater I'm able to Flash all of the Sense ROM's not sure if they are considered AOSP. Give me an example of one and I'll try it. I'm not 100% sure if I took the OTA update before I Rooted and S-offed/unlocked the device but I think I did. I Flashed Santods Nobootimg firmware via ADB to be sure I was on the latest firmware. I know my radios were up to date before doing this but I wasn't sure about the FW so I flashed it. Flashed fine, didn't need to flush again, flashed fine first time.
Click to expand...
Click to collapse
I'll post a link to a aosp ROM but first can you link me to the firmware file you flashed?
krazie1 said:
I'll post a link to a aosp ROM but first can you link me to the firmware file you flashed?
Click to expand...
Click to collapse
4th one down and this was per Santod's instuction so I'm sure it's good.
http://www.androidfilehost.com/?w=files&flid=13966
Duckman_UF said:
4th one down and this was per Santod's instuction so I'm sure it's good.
http://www.androidfilehost.com/?w=files&flid=13966
Click to expand...
Click to collapse
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
krazie1 said:
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
Click to expand...
Click to collapse
Yes, ADB Fastboot Hboot...exactly as video instructed. No problems at all.
I'll give it a shot!
krazie1 said:
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
Click to expand...
Click to collapse
Is a Gapps package needed for this ROM. Ive used Cyanogen ROM's before just not on this Phone.
Duckman_UF said:
Yes, ADB Fastboot Hboot...exactly as video instructed. No problems at all.
I'll give it a shot!
Click to expand...
Click to collapse
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
krazie1 said:
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
Click to expand...
Click to collapse
Thats what I thought..Thanks! About to dl Gapps and give it a shot.
krazie1 said:
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
Click to expand...
Click to collapse
Yep flashed fine...no problems.
Duckman_UF said:
Yep flashed fine...no problems.
Click to expand...
Click to collapse
OK then, did you try both GPE ROMs for the vzw variant? Download the newest version of sinlessrom and wipe advanced (cache, dalvik cache, data & system) in TWRP.
http://www.androidfilehost.com/?fid=23578570567721616
krazie1 said:
OK then, did you try both GPE ROMs for the vzw variant? Download the newest version of sinlessrom and wipe advanced (cache, dalvik cache, data & system) in TWRP.
http://www.androidfilehost.com/?fid=23578570567721616
Click to expand...
Click to collapse
Already tried...Various Roms, various versions, 2 versions of TWRP (As stated) Aroma, non Aroma...They all just sit there and churn away on the boot screen or power down the device. I always wipe in that fashion
Man I'm out of ideas, I really want to help but can't think of anything. I'll still look and see if I can find anything.
krazie1 said:
Man I'm out of ideas, I really want to help bit can't think of anything. I'll still look and see if I can find anything.
Click to expand...
Click to collapse
I really appreciate your help. Santod and me went back and forth via PM a few times and JayDee modified his Rom for me and now you. IDK....I'm dumbfounded. If you think of anything let me know. I'll just stay on AOSP for now. Always liked Cyanogen's stuff anyway, just never even thought about them since their ROMS are not in the forums. They used to be for my various other phones. Never really though about them not being on XDA until we did this just now. Thanks again for you time and help!!!
Duckman_UF said:
I really appreciate your help. Santod and me went back and forth via PM a few times and JayDee modified his Rom for me and now you. IDK....I'm dumbfounded. If you think of anything let me know. I'll just stay on AOSP for now. Always liked Cyanogen's stuff anyway, just never even thought about them since their ROMS are not in the forums. They used to be for my various other phones. Never really though about them not being on XDA until we did this just now. Thanks again for you time and help!!!
Click to expand...
Click to collapse
Yeah cm11 is what I'm currently using, it recently had a speakerphone issue but its been fixed since 7/30. The only AOSP ROMs that have incorporated the fix are cm11, liquidsmooth & aokp. Here is the section for all the aosp ROMs they are universal so means 1 zip for all HTC One M8 variants.
http://forum.xda-developers.com/htc-one-m8/orig-development
Have you tried a RUU?
young0ne said:
Have you tried a RUU?
Click to expand...
Click to collapse
What do you mean? I put the phone in RUU when when flashing the firmware with ADB??
Duckman_UF said:
What do you mean? I put the phone in RUU when when flashing the firmware with ADB??
Click to expand...
Click to collapse
it put stock back on the phone just like it was new out of box. it re installs everything from factory.
Thanks!
GNU con Linux
I've been away for a while, and I'd like to update my M8. My phone says that I am currently on build 4.4.3. I am rooted, and unlocked. I wondered.....are there any special steps that I need to take, to get up to current build/ROMs? If so, I would very much appreciate it if someone would be so kind as to give me some steps.
Thanks in advance!!
ddodge68 said:
I've been away for a while, and I'd like to update my M8. My phone says that I am currently on build 4.4.3. I am rooted, and unlocked. I wondered.....are there any special steps that I need to take, to get up to current build/ROMs? If so, I would very much appreciate it if someone would be so kind as to give me some steps.
Thanks in advance!!
Click to expand...
Click to collapse
Latest TWRP 2.8.6
schneid said:
Latest TWRP 2.8.6
Click to expand...
Click to collapse
I'm currently on Team Win Recovery Project v2.7.1.0. It's been a long time since I messed with my phone much. Can you tell me how/where I update to the current version?
ddodge68 said:
I've been away for a while, and I'd like to update my M8. My phone says that I am currently on build 4.4.3. I am rooted, and unlocked. I wondered.....are there any special steps that I need to take, to get up to current build/ROMs? If so, I would very much appreciate it if someone would be so kind as to give me some steps.
Thanks in advance!!
Click to expand...
Click to collapse
Hit the link in my signature below. Good place to start.
ddodge68 said:
I'm currently on Team Win Recovery Project v2.7.1.0. It's been a long time since I messed with my phone much. Can you tell me how/where I update to the current version?
Click to expand...
Click to collapse
For starters I posted a 5.0.1 firmware zip in tigerstowns firmware thread that actually contains the latest twrp all in one shot. Then there are many roms you can chose to flash. Take your pick but get firmware updated first. Make sure you do the one with twrp 2.8.5 included. Older twrp on new firmware will cause you some pretty bad issues.
dottat said:
For starters I posted a 5.0.1 firmware zip in tigerstowns firmware thread that actually contains the latest twrp all in one shot. Then there are many roms you can chose to flash. Take your pick but get firmware updated first. Make sure you do the one with twrp 2.8.5 included. Older twrp on new firmware will cause you some pretty bad issues.
Click to expand...
Click to collapse
Any chance you could link me, so I avoid getting the wrong file? Thanks for the help!!!
ddodge68 said:
Any chance you could link me, so I avoid getting the wrong file? Thanks for the help!!!
Click to expand...
Click to collapse
This is the firmware zip.
https://www.androidfilehost.com/?fid=95916177934537898
dottat said:
This is the firmware zip.
https://www.androidfilehost.com/?fid=95916177934537898
Click to expand...
Click to collapse
I'm really sorry for asking all of these questions. So that I don't brick my phone...I just put this zip file on my ext storage, and flash it using the current twrp? Or maybe you've got complete directions in a post, somewhere? Thanks again, very much, for the help!!!
ddodge68 said:
I'm really sorry for asking all of these questions. So that I don't brick my phone...I just put this zip file on my ext storage, and flash it using the current twrp? Or maybe you've got complete directions in a post, somewhere? Thanks again, very much, for the help!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2723159
Not for flashing via twrp.
Is it possible to install xposed framework on cm12s?
Through the xposed installer I always get an error: 'CANNOT LINK EXECUTABLE: could not load library "libdvm.so" needed by "/data/data/de.robv.android.xposed.installer/cache/app_process"; caused by library "libdvm.so" not found'
It also says that Xposed is not compatible with Android SDK Version 21 or my Processor architecture.
Obviously I am using a OnePlus One. With CM12s.
Thanks in advance,
TheKampfkeks96
I also have this issue. I haven't looked through any forums yet though, I just saw your post and thought I'd see if you had anything on it.
NoSyt15 said:
I also have this issue. I haven't looked through any forums yet though, I just saw your post and thought I'd see if you had anything on it.
Click to expand...
Click to collapse
Try to use the latest alpha. Also, there is an apk (installer) and one zip you need to flash in order to make it work.
Downloads:
xposed-arm-*.zip: Must be flashed with a custom recovery to install the framework.
XposedInstaller_3.0-alpha*.apk: Must be installed to manage installed modules
http://forum.xda-developers.com/showthread.php?t=3034811
davebugyi said:
Try to use the latest alpha. Also, there is an apk (installer) and one zip you need to flash in order to make it work.
Downloads:
xposed-arm-*.zip: Must be flashed with a custom recovery to install the framework.
XposedInstaller_3.0-alpha*.apk: Must be installed to manage installed modules
http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Awesome. Thank you, I will try this now.
NoSyt15 said:
Awesome. Thank you, I will try this now.
Click to expand...
Click to collapse
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
fogame said:
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
Click to expand...
Click to collapse
Thank you very much, do you know when there will be a stable version?
fogame said:
Keep in mind that you need to flash the super alpha version for 5.1. A lot of stuff will be broken regardless what version you are on.
Click to expand...
Click to collapse
Cm 12s is 5.0.2 not 5.1 so you should go with 3.0 alpha build 2 on official xposed thread..
TheKampfkeks96 said:
Thank you very much, do you know when there will be a stable version?
Click to expand...
Click to collapse
TheKampfkeks96 said:
Thank you very much, do you know when there will be a stable version?
Click to expand...
Click to collapse
Only time will tell. the Devs are working on it
kunal1540 said:
Cm 12s is 5.0.2 not 5.1 so you should go with 3.0 alpha build 2 on official xposed thread..
Click to expand...
Click to collapse
Lifesaver! Thank you... commonsense prevails :silly:
I updated my oneplus last night with the latest OTA YNG1TAS2I3 and my copy of xposed didnt work in TWRP... so searched and found the latest arm22 version.... this still didnt work.
Reading your comment made me think to go back to the original old school 3.0 alpha version - THIS WORKED.
Thank you again!
Thanks for the reply. But I think the rest of the OnePlus One users would like to know exactly where you down loaded the files and any installation instructions we may need. Not knowing what old school means in this case.
bmaz121 said:
Thanks for the reply. But I think the rest of the OnePlus One users would like to know exactly where you down loaded the files and any installation instructions we may need. Not knowing what old school means in this case.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3034811
I have downloaded it from the above link.
--> Download arm.zip and flash it and then wipe dalvik cache and reboot and be patient.
--> Download the alpha4.apk and install
--> You're good to go,Download your favourite modules
It worked for me
Donate to rovo89 or thank me or both:good:
Error with latest update YOG4PAS1N0
Hi,
flashed yesterday this Image (I am on TWRP), I tried to flash again flash 3.0 but I got an error from TWRP and when started the device was unusable (lot of FC).
Had to flash again the Image.
Anyone with this problem? I don't want to try again because the wipe cache and subsequent "Upgrading..."is excuciating
Thanks!
SergioBigred said:
Hi,
flashed yesterday this Image (I am on TWRP), I tried to flash again flash 3.0 but I got an error from TWRP and when started the device was unusable (lot of FC).
Had to flash again the Image.
Anyone with this problem? I don't want to try again because the wipe cache and subsequent "Upgrading..."is excuciating
Thanks!
Click to expand...
Click to collapse
I did not quite get your exact problem.Hence I am trying to reiterate clearly.
--> Download the arm.zip(not 64) file in the above link.Reboot to recovery(twrp).Go to install and locate the file and flash it and wipe dalvik/cache and reboot and be patient.
--> After reboot, download the .apk(alpha4) file from above link and install it and open the installed xposed installer app.
Hope it is more clear than my earlier comment and it helps you
OpO
ScreaMRooT said:
I did not quite get your exact problem.Hence I am trying to reiterate clearly.
--> Download the arm.zip(not 64) file in the above link.Reboot to recovery(twrp).Go to install and locate the file and flash it and wipe dalvik/cache and reboot and be patient.
--> After reboot, download the .apk(alpha4) file from above link and install it and open the installed xposed installer app.
Hope it is more clear than my earlier comment and it helps you
OpO
Click to expand...
Click to collapse
When you say be patient, how patient is patient? I've left it for 10-15 mins and still never gotten past the splash.
Which version is your OS?It worked in 5.0.2
OpO
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you