Database Info

Huge battery drain after latest update

I got an update today in the morning that was like 7mb that fixed some sort of notification for 3rd party apps...or something like that I cant remember. But today my battery died before work was over and I'm pretty sure I was above 50% before I turned it off yesterday. I was getting more than 5% drain per hour. So what can I do?

What is your current firmware version?

vndnguyen said:
what is your current firmware version?
Click to expand...
Click to collapse
r760xxu2bqh1

Mine also terrible lately, check out samsung USA community pages it's flooded with people with same issues.
Sent from my SM-G935F using Tapatalk

i have same problem. i have Gear S3 Frontier SM-R760 with R760XXU2BQC5 rom. i used to use my gear about 4-5 days with a single charge but 3 days ago my gear charge started to remain just 12 hours with the same settings same behavior same usage. i did not install any app any update or any watchface. i restarted, 2 times factory resetted and reinstalled ROM (R760XXU2BQC5) but nothing changed. its happened like this: everything was going well my gear charge was about %80 i put my s3 on desk in the morning and go out. when i came back to home in the evening i found its not working. tried to open it but no success because its battery drained i put it in charge after a while it opened. thats how things happened. after all this i send my gear to samsung service. but the big brand samsung send it back to me without any operation. they noted they didnt find any problem on the watch !!! this will be the last samsung brand device which i ll buy. so im looking for a solution. please help (sorry for my bad english)

ymeksur said:
i have same problem. i have Gear S3 Frontier SM-R760 with R760XXU2BQC5 rom. i used to use my gear about 4-5 days with a single charge but 3 days ago my gear charge started to remain just 12 hours with the same settings same behavior same usage. i did not install any app any update or any watchface. i restarted, 2 times factory resetted and reinstalled ROM (R760XXU2BQC5) but nothing changed. its happened like this: everything was going well my gear charge was about %80 i put my s3 on desk in the morning and go out. when i came back to home in the evening i found its not working. tried to open it but no success because its battery drained i put it in charge after a while it opened. thats how things happened. after all this i send my gear to samsung service. but the big brand samsung send it back to me without any operation. they noted they didnt find any problem on the watch !!! this will be the last samsung brand device which i ll buy. so im looking for a solution. please help (sorry for my bad english)
Click to expand...
Click to collapse
Some USA customers have had reports back stating their motherboard or main boards have been replaced.
Which is probably a lie, as it's only been happening globally since the updates, my cousin has the Classic variant, and is on same firmware and his is still fine.
Sent from my SM-G935F using Tapatalk

After a full drain and full charge its back to normal

orlans21 said:
After a full drain and full charge its back to normal
Click to expand...
Click to collapse
I might try this next as I've done a recovery reset and uninstalled the gear app on my phone.
Going to test it through tomorrow and drain it hard towards the end of the day to see what happens.
Sent from my SM-G935F using Tapatalk

drained about 5 percent in 8 hours today

orlans21 said:
drained about 5 percent in 8 hours today
Click to expand...
Click to collapse
I think mine is on newer firmware than yours.... Time will tell.
Sent from my SM-G935F using Tapatalk

daiash said:
I think mine is on newer firmware than yours.... Time will tell.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
r760xxu2bqh1 is the latest one

orlans21 said:
r760xxu2bqh1 is the latest one
Click to expand...
Click to collapse
I'm on BQC5
Sent from my SM-G935F using Tapatalk

daiash said:
I'm on BQC5
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
BQH > BQC

orlans21 said:
BQH > BQC
Click to expand...
Click to collapse
No updates available apparently on mine
Sent from my SM-G935F using Tapatalk

daiash said:
No updates available apparently on mine
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Then it probably hasn't reached your region yet.
https://www.sammobile.com/2017/03/2...-update-brings-new-features-and-improvements/

orlans21 said:
Then it probably hasn't reached your region yet.
https://www.sammobile.com/2017/03/2...-update-brings-new-features-and-improvements/
Click to expand...
Click to collapse
This article states that BQC5 is the latest, I'm confused......
Sent from my SM-G935F using Tapatalk

daiash said:
This article states that BQC5 is the latest, I'm confused......
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
It's not the latest. That came out in April and I just got an update a few days ago...actually 2 firmware updates

orlans21 said:
It's not the latest. That came out in April and I just got an update a few days ago...actually 2 firmware updates
Click to expand...
Click to collapse
Ah ok. I'll keep checking, what region are you in then?
Sent from my SM-G935F using Tapatalk

daiash said:
Ah ok. I'll keep checking, what region are you in then?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Canada

Samsung devices "select" Firmware by Sales Code/active CSC...
So not every Sales Code/CSC receive Firmware...
BQG4 and BQH1 are only for US CSC available:
Code:
XAR
Reading/detect active Sales Code is not easy... but not impossible.
Example here:
This should work with SDB without ROOT...
Code:
sh-3.2$ vconftool get -t string db/csc/salescode
[B]db/csc/salescode, value = DBT (string)[/B]
DBT is my German Sales Code...
Code:
sh-3.2$ vconftool get -t string db/csc/bincode
[B]db/csc/bincode, value = OXA (string)[/B]
All easy Codes are disabled and I know NO Tizen app from Store... which easy display Sales Code...
Only as info.
Best Regards
Edit 1.
Sales Code from Korea... also receive BQH1...
Code:
KOO
No idea if more countries... and when...
Edit 2.
About Battery...
https://us.community.samsung.com/t5...ery-drain-after-gear-S3-app-update/td-p/98171

Tizen 3

I just got notification for Tizen 3 update
Currently can't install it as I am away from Wi-Fi.
Anybody tried it?

I just came to ask the same question.
https://www.sammobile.com/2017/11/20/tizen-3.0-rolling-out-gear-s3-value-pack-update

dont. after updating, my home/power button does nothing. i cant access apps or settings now ..... grrrrr

daggebauer said:
Tizien 3 update
Click to expand...
Click to collapse
Tizen.

Corrected

I installed few hours ago and all seems to be working properly. First thing I noticed that changed was the first wuget which was 4 components which you could not change is now 6 customized and a center one which takes you to all apps. Also I could be wrong but it appears the Under Armour apps are widgitized and I think more adaptable to Shealth.
Also it seems SVoice was upgraded. Could be me but it seems to run a little faster.
Overall a large upgrade for the device

Where are you?

Upgraded now getting gear s plugin keeps restarting on my phone. USA
Sent from my SM-N950U using Tapatalk

In St Louis Missouri
Also a very nice feature which android wear has is the ability to place in watch only mode. Basically shuts down all apps and connections and just coverts to standard watch. Great to extended battery life. When I messed with it it indacted battery life would be over 15 days

Emhdroid said:
In St Louis Missouri
Also a very nice feature which android wear has is the ability to place in watch only mode. Basically shuts down all apps and connections and just coverts to standard watch. Great to extended battery life. When I messed with it it indacted battery life would be over 15 days
Click to expand...
Click to collapse
St Charles, MO! Is yours Bluetooth or from a carrier?

Hey neighbor! Well here is my ownership in the past 3 days. I had the ATT Frontier for sometime. Decided to test Huawei watch2. Used a day or so and returned it and picked up a S3 Classic BT version. Today I ordered the S3 Classic ATT version. Love the watch and figured go with LTE. .
BTW: you do not by chance work at Microsoft in Maryland Hieghts

gettinwicked said:
St Charles, MO! Is yours Bluetooth or from a carrier?
Click to expand...
Click to collapse
I have not received Tizen 3 update yet...in New Orleans, La...is there problems with it?
Sent from my iPad using Tapatalk

Great new feature - Bezel wake up on/off

I had update yesterday but on Gear info it is said Tizen 2.3.2.3 is that what everybody talking about ? I am in Maryland , Verizon Wireless

Verizon Wireless
Click to expand...
Click to collapse
Sorry.
The problem is.
Samsung has more then 10 different deviceS under the pet name:
"Gear S3"
And over 80 "different" CSC... Sales Code...
So for every Sales Code+ corresponding REAL device Samsung off Firmware update...
This makes around 90 Variants...
If I see Verizon...
Then I am 99,9 % sure you have:
SM-R765V...
Your Sales Code is:
Code:
VZW
So your latest available Firmware is:
Code:
R765VVRU1AQF4/R765VVZW1AQF4/R765VVRU1AQF4
Now you can check on your device... with easy peasy steps... if I dreaming or maybe this could be true...
Under Settings--> About device
You can find many infos...
Or you simple type:
Code:
*#1234#
Then you can try to compare...
Most users here report about Tizen 3 for SM-R760 and/or SM-R770
So check this post:
https://forum.xda-developers.com/showpost.php?p=74580816&postcount=47
Best Regards

I installed 3.0 last night. Yesterday, on the previous firmware, my watch was generally using around 2% battery per hour. With the same watchface, using the watch in the same way, I'm now using more like 4-5% per hour. Might try a factory reset.
---------- Post added at 02:48 PM ---------- Previous post was at 02:23 PM ----------
Just done a factory reset and now it's using 1% every 7 minutes!! ****ing useless Samsung twats

adfree said:
Sorry.
The problem is.
Samsung has more then 10 different deviceS under the pet name:
"Gear S3"
And over 80 "different" CSC... Sales Code...
So for every Sales Code+ corresponding REAL device Samsung off Firmware update...
This makes around 90 Variants...
If I see Verizon...
Then I am 99,9 % sure you have:
SM-R765V...
Your Sales Code is:
Code:
VZW
So your latest available Firmware is:
Code:
R765VVRU1AQF4/R765VVZW1AQF4/R765VVRU1AQF4
Now you can check on your device... with easy peasy steps... if I dreaming or maybe this could be true...
Under Settings--> About device
You can find many infos...
Or you simple type:
Code:
*#1234#
Then you can try to compare...
Most users here report about Tizen 3 for SM-R760 and/or SM-R770
So check this post:
https://forum.xda-developers.com/showpost.php?p=74580816&postcount=47
Best Regards
Click to expand...
Click to collapse
Thanks for your help. I do have the AQF4 software version and it is Tizen 2.3.2.3 ?
I will check the link you provided.
So, I guess I just have to keep waiting for 3.0 ??
Sent from my SM-G950U1 using Tapatalk

maddie01 said:
Thanks for your help. I do have the AQF4 software version and it is Tizen 2.3.2.3 ?
I will check the link you provided.
So, I guess I just have to keep waiting for 3.0 ??
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Yes, sorry.
No other way as to wait...
At the moment none of these SM-R765 (LTE) Versions received Tizen 3 Firmware.
Nobody knows how long you have to wait...
Best Regards

I performed the update yesterday, and I am also experiencing battery drain. After 2 hours off the charger, the battery is at 79%. You guys might want to wait on performing the update for now.

And I also updated yesterday fully charged at 10:30 p.m. woke up at 6:45 a.m. and the watch was at 97% so no battery drain here but I'm not running custom stuff
Sent from my SM-N950U using Tapatalk

can't update to tizen 3.0

ive read from a couple of webpages that gear s3 has received tizen 3.0 but i press update in the gear app to update mine and it says is up to date but the version its has is 2.3.2.4, any suggestions?

Wait...
Samsung removed ALL Tizen 3 updates for now... tooooo much bugs.
Code:
CQK3
and
CQK6
This means SM-R760 AND SM-R770...
For SM-R765 or SM-R775 NEVER public released yet...
No idea how long Samsung need for bugreduced Version...
Maybe weekS...
Best Regards

Thanks

Is it confirmed that no more users can get the update?? So basically rollout has stopped??

This explains why my replacement watch that I got yesterday kept saying it is up-to-date.

If rollout has stopped then samsung is finally working on a fix for battery woes. Although a friend of mine conformed me that he got update on Sunday morning..here in Pakistan. Not sure if updates are still coming through in some regions he is good so far in last 8 to 10 hrs as he resrt right after update

http://fota-cloud-dn.ospserver.net/firmware/PAK/SM-R760/version.xml
http://fota-cloud-dn.ospserver.net/firmware/PAK/SM-R770/version.xml
Pakistan with Sales Code PAK is also back to:
Code:
BQC5
No CQK2 nor CQK6...
No idea how long they need for the 20 MB Fix...
Best Regards

Samsung will take ages
---------- Post added at 12:57 PM ---------- Previous post was at 12:55 PM ----------
They would have done some QA first. It is the best watch in market leaving this update in trash. May be ..the update comes before 2018

https://www.sammobile.com/news/revised-tizen-3-0-update-for-gear-s3-rolling-out-now
Rollout started again?? Can someone confirm....

I got the update notification, but I haven't installed it yet; I'm waiting to see if this version screws up everybody's watch like the last version did.

Avail211 said:
I got the update notification, but I haven't installed it yet; I'm waiting to see if this version screws up everybody's watch like the last version did.
Click to expand...
Click to collapse
What's your csc?? Country

papubhai said:
https://www.sammobile.com/news/revised-tizen-3-0-update-for-gear-s3-rolling-out-now
Rollout started again?? Can someone confirm....
Click to expand...
Click to collapse
It is started but they announced that it would be a staged rollout and the initial stage would be limited.

I have yet to see a new csc..even version of new update

So I picked up an S3 from the Mrs for Xmas
And apparently it's on Tizen 3.0.0.1.... but I'm not sure if this is a good thing or not? Have they paused this update due to battery issues?
I can't tell yet as it's brand new but I have most of the settings turned off (AOD, heartrate etc) and apparently it's got 2 days in it. Perhaps cos I've been messing with it so much. Maybe on everyday wear it'll be better. Time will tell.
My firmware version is R760XXU2CQK3.

Cqk3 id s nightmare..for battery

papubhai said:
What's your csc?? Country
Click to expand...
Click to collapse
USA

Wel.usa has the update already.
Csc XSA is the lucky one

Tizen 3.0 update now live....

Moots23 said:
So I picked up an S3 from the Mrs for Xmas
And apparently it's on Tizen 3.0.0.1.... but I'm not sure if this is a good thing or not? Have they paused this update due to battery issues?
I can't tell yet as it's brand new but I have most of the settings turned off (AOD, heartrate etc) and apparently it's got 2 days in it. Perhaps cos I've been messing with it so much. Maybe on everyday wear it'll be better. Time will tell.
My firmware version is R760XXU2CQK3.
Click to expand...
Click to collapse
I've just got a Frontier and it's also on 3.0.0.1, I'm in the UK. I've manually checked for updates and there's non available. I must be on the latest version?

papubhai said:
Wel.usa has the update already.
Csc XSA is the lucky one
Click to expand...
Click to collapse
Im TMob LTE. Let me know how this works for you. If it sucks I'll not update.

Revised tizen 3.0 update? (New gear s3 owner (need help))

So I just got my shiny new bluetooth Gear S3 Frontier for Christmas and im loving it. And I can see that the tizen 3.0 update is available for download through the Gear app but there seems to be some battery drain issues related to this update. So, does the update that I see in my Gear app also include the battery drain fix that has started to roll out or is it still the original Tizen 3.0 update? Btw I am located in the U.S. if that helps.

SM-R760 with Sales Code/CSC:
Code:
XAR
For US... have second Tizen 3.0.0.1:
Code:
CQ[COLOR="Green"][B]L1[/B][/COLOR]
Old.. first release was:
Code:
CQ[COLOR="Red"][B]K3[/B][/COLOR]
If you read other posts... comments...
It is not 100 % clear if "new" Version fix battery problem or is in other cases "better"...
Check for instance here:
https://us.community.samsung.com/t5/Wearable-Tech/bd-p/wearabletech
Or in XDA other threads and posts...
Or Google...
Best Regards

I just got a Classic for Christmas, so my experience is also limited. I updated it right out of the box. However, after two days of heavy use getting all the aid set up and such, I used it more normally today and still had 50% battery. That's still pretty great imo since I just put it on my charger every night. It's a significant improvement over my last watch, the LG Urbane running Android Wear.

natefish said:
I just got a Classic for Christmas, so my experience is also limited. I updated it right out of the box. However, after two days of heavy use getting all the aid set up and such, I used it more normally today and still had 50% battery. That's still pretty great imo since I just put it on my charger every night. It's a significant improvement over my last watch, the LG Urbane running Android Wear.
Click to expand...
Click to collapse
So you are running tizen 3.0 now?

NorthMNperson said:
So you are running tizen 3.0 now?
Click to expand...
Click to collapse
Yes

So were getting advertising posts now? Admins? That cool?

NorthMNperson said:
So I just got my shiny new bluetooth Gear S3 Frontier for Christmas and im loving it. And I can see that the tizen 3.0 update is available for download through the Gear app but there seems to be some battery drain issues related to this update. So, does the update that I see in my Gear app also include the battery drain fix that has started to roll out or is it still the original Tizen 3.0 update? Btw I am located in the U.S. if that helps.
Click to expand...
Click to collapse
They first released a fix for the old Tizen 3 and pulled the full update. If you're on Tizen 2 now and see an update for Tizen 3, it should be for a fixed version and not the old battery killer version.

Tel864 said:
They first released a fix for the old Tizen 3 and pulled the full update. If you're on Tizen 2 now and see an update for Tizen 3, it should be for a fixed version and not the old battery killer version.
Click to expand...
Click to collapse
Even if it doesn't list the battery life improvement?

NorthMNperson said:
Even if it doesn't list the battery life improvement?
Click to expand...
Click to collapse
I'm going with something I read from Samsung about them pulling the bad Tizen 3 download. I can't guarantee that though. If you can get it and it isn't the fixed one, then the fix should be available for you shortly. The fixed download would be the same as the original Tizen 3 plus the small fix.
Sent from my B3-A40 using Tapatalk

Updated my AT&T Frontier S3 from official OTA Tizen 3.0 update today

highaltitude said:
Updated my AT&T Frontier S3 from official OTA Tizen 3.0 update today
Click to expand...
Click to collapse
And what kind of battery life are you getting? Around 2 days?

Honestly I'm not sure, as it works all day until I go to bed, and then I put it on the charger. If anything it doesn't seem different in that aspect, but the OS seems snappier.
Grey

Another new update is rolled out for gear s3 frontier (tizen 3.0.0.2)

New update in battery and bluetooth improvement is rolled out.check your update section guyz.
Firmware version-R760XXU2CRC3.
Hope this time battery backup will improve more.

Nothing here on att lte version.

Still nothing in France either.

Rebel2k said:
Still nothing in France either.
Click to expand...
Click to collapse
Hope it will reflect soon.

Me too!!!

Hi where are you based to have recieved this update? Also what is new?
Nothing here in U.K as far as updates concerned...

Update available for me in California - US. Wifi version of S3 Frontier connected to my T-mobile Note 8.
Hopefully it fixes the damn lag issues with Tizen 3.0.0.1, My S3 went from being amazing pre-Tizen 3.0 to a steaming pile of **** with 3.0.0.1... it Lags increadibly HARD. I wan't to downgrade back to 2.3.2.0 but from everything that I've been reading, its possible but we loose S Pay... Anyone have any info if there is a downgrade available with SPay still functional?

maniacallyhappy said:
Confirming that there is no update available for me in California - US. Wifi version of S3 Frontier connected to my T-mobile Note 8.
Hopefully it fixes the damn lag issues with Tizen 3.0.0.1, My S3 went from being amazing pre-Tizen 3.0 to a steaming pile of **** with 3.0.0.1... it Lags increadibly HARD. I wan't to downgrade back to 2.3.2.0 but from everything that I've been reading, its possible but we loose S Pay... Anyone have any info if there is a downgrade available with SPay still functional?
Click to expand...
Click to collapse
I'm in CA too with the Bluetooth version and I got the update yesterday and it has destroyed my battery life. 4 hours tops. Perhaps they pulled it because of this issue. I wish I knew how to roll back, it's not even worth taking it off of the charger its so bad.

pipergca said:
I'm in CA too with the Bluetooth version and I got the update yesterday and it has destroyed my battery life. 4 hours tops. Perhaps they pulled it because of this issue. I wish I knew how to roll back, it's not even worth taking it off of the charger its so bad.
Click to expand...
Click to collapse
Crap... I'm literally in the middle of doing the update... maybe after a master reset it'll settle down again? If this makes my gear S3 take a dive... I'm just going to reset to 2.3.2.3 whether I can use SPay or not... this is effing ridiculous man...

maniacallyhappy said:
Crap... I'm literally in the middle of doing the update... maybe after a master reset it'll settle down again? If this makes my gear S3 take a dive... I'm just going to reset to 2.3.2.3 whether I can use SPay or not... this is effing ridiculous man...
Click to expand...
Click to collapse
Let me know how it goes for you. If your battery life is ok then I'll know my issue is something else. I was good on the previous version of 30.0.1

pipergca said:
Let me know how it goes for you. If your battery life is ok then I'll know my issue is something else. I was good on the previous version of 30.0.1
Click to expand...
Click to collapse
3.0.0.1 made my S3 Frontier lag like nasty... On 2.3.2.0 it was amazing, snappy, responsive, could get rid of the S Health b.s. I commute over an hour to and from work and use my watch to control my music on my phone. After a certain time, the watch just gives me the notification that I've been sitting for over an hour and doesn't let me swipe down and click on the music tray to quickly get to the music controller. If I pick up calls using my watch, it takes over 3 seconds before the mic begins to work... it just lags and is over all slower than crap... Makes me want to chuck the watch. I love S Pay though, but at this point I'm willing to forgo S Pay and just downgrade Tizen to have a good functioning watch. My batter went from 80% to 74%. I'll let you know how the battery performs with the update. Hopefully the response is snappier too, but I'm not expecting much at this point.

Nothing here on my T-Mobile Gear S3 frontier. I'll keep a look out, while I continue to hunt down the internet for a downgrade to Tizen 2 without bricking this thing again.
I miss the days with the Gear S where I could just plug in the watch and get the files easily off of SamMobile.

Update available for me in California - Wifi SM-R760 version of S3 Frontier connected to my T-mobile Note 8.
Will

Is there anyway to go back to old firmware? I bought the watch on 3.0.0.1 and everything seems to be miles out...steps....floor count....ect.
Wonder if all that was better on old firmware?
I would sacrifice samsung pay for accurate fitness measurements.

pipergca said:
Let me know how it goes for you. If your battery life is ok then I'll know my issue is something else. I was good on the previous version of 30.0.1
Click to expand...
Click to collapse
Hey PiperGCA,
So I've been testing my S3 and with 3.0.0.2 seems to be a little bit snappier than 3.0.0.1 (No where near as snappy as 2.3.2.3 but improvement is improvement!) The battery is also doing really well! Have you tried to factory reset your S3 Frontier since you upgraded the firmware?

maniacallyhappy said:
3.0.0.1 made my S3 Frontier lag like nasty... On 2.3.2.0 it was amazing, snappy, responsive, could get rid of the S Health b.s. I commute over an hour to and from work and use my watch to control my music on my phone. After a certain time, the watch just gives me the notification that I've been sitting for over an hour and doesn't let me swipe down and click on the music tray to quickly get to the music controller. If I pick up calls using my watch, it takes over 3 seconds before the mic begins to work... it just lags and is over all slower than crap... Makes me want to chuck the watch. I love S Pay though, but at this point I'm willing to forgo S Pay and just downgrade Tizen to have a good functioning watch. My batter went from 80% to 74%. I'll let you know how the battery performs with the update. Hopefully the response is snappier too, but I'm not expecting much at this point.
Click to expand...
Click to collapse
Thanks for the update! I did reset it. I'm going to have to try that again.

sorry I don't mean to hijack this topic but I updated yesterday and the update message won't go away is this happening to anyone else if so how do I make the update notification go away on my gear S3 Frontier

dj.shauny.g said:
Hi where are you based to have recieved this update? Also what is new?
Nothing here in U.K as far as updates concerned...
Click to expand...
Click to collapse
its released for uae based.i have changed csc to uae for using spay in india and i got this update.it will reflect soon to every region.
its based on battery life improvement and bluetooth connection improvement.

Hey mates!
as per my own experiance with gear s3 frontier.from the first 2.3.2.3 version to 3.0.0.2 is that-
1.sammy made very much disappointment in tizen 3.0.0.1
which was seems to be better.
2.in my experiance over tizen 3.0.0.2 is now sammy have implement quiet better battery life and connectivity improvement.
3.if anyone wants to revert back then he can revert but i would suggest all of members to reset your watch when u get an new update.first update and then reset it.so,you can get max. profit from your update.
4.there might be some issue can be found with tizen 3.0.0.1 or tizen 2.3.2.4 while adding spay cards.because software with server is upgraded but not your firmware.due to that it might not get activated.

The Samsung announcement mentioned in the OP appears to be only for the R760 (Non-LTE model) - Is there a similar announcement either from Samsung or AT&T for the R765A (LTE model sold by AT&T)?