ROOT & Stock ROM for SM-J727S Galaxy J7 May 2017 - Samsung Galaxy J7 Questions & Answers

Hi guys,
I was hoping someone could help me out. I have rooted before (long time ago) but I can't seem to find a lot of information on this specific phone (SM-J727S). I have been searching online (and across many dodgy looking websites, thanks No Script!) and this is about all that I have found:
The Galaxy J7 is also known as the Galaxy Wide 2 in South Korea
http://pdadb.net/index.php?m=device&id=11601&c=samsung_sm-j727s_galaxy_wide_2
It was released on May 2017, runs Android 7.0 (Nougat) and uses the Exynos chipset
TWRP has a release for the J700 series but I'm not sure if it would work on the J727S
https://twrp.me/devices/samsunggalaxyj7exynos.html
The source code for the system has been released, but I couldn't find a stock ROM (which made me reluctant to try TWRP)
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=j727s
This is the closest I got to a Stock ROM but I don't trust the site, is this site trustworthy? (again, I came across too many dodgy sites to just download anything)
https://stockromupdate.com/2017/07/26/stock-rom-sm-j727s-samsung-galaxy-wide-2/
The KingRoot method currently will not work and is asking me to wait for an update (phone is probably too new to root?)
The closest thing I can find on this forum are these posts (but none reference the J727S model)
https://forum.xda-developers.com/galaxy-j7/development/root-sm-j727p-galaxy-j7-perx-td-lte-t3611202
https://forum.xda-developers.com/galaxy-j7/help/root-sm-j727p-galaxy-j7-perx-galaxy-j7-t3598117
So, I'm hoping someone could point me in the right direction. Thanks in advance

I'd thought I'd mention that the bootloader is unlockable in this phone. I had read elsewhere that other people cannot access the 'OEM Unlock' option on their version of the J7. It isn't the case with this phone
https://forum.xda-developers.com/galaxy-j7/help/galaxy-j7-pop-galaxy-halo-t3647805/page2
I also got a message from Google talking about my accounts being accessed by a 'J7 Pop'. I guess the Galaxy Wide 2 is also known as the J7 Pop?

So, I'm still on the track of rooting this device. I'm just gonna update any relevant stuff here.
The closest TWRP that I can find is for the 2016 version of this phone, it has the same Exynos chipset.
I'm thinking of trying this, but are there any problems with flashing the wrong version of TWRP? (Will I brick the phone? Or will it just error-out on recovery and boot normally?)
https://twrp.me/devices/samsunggalaxyj72016exynos.html
I also found (what I believe to be) the Stock ROM for this type of phone, you have to sign up to the site in order to download it. It is specific to SK Telecom (Korean telecommunications provider)
https://www.sammobile.com/firmwares/samsung-galaxy/SM-J727S/SKC/download/J727SKSU1AQD6/172065/
If someone can advise about going forward with the similar TWRP version I'd appreciate it. Cheers!
EDIT: Kinda answered my own question, from the TWRP download page https://dl.twrp.me/j7xelte/
Downloading an image for a different device, no matter how similar, usually does not work.
Click to expand...
Click to collapse
Any way to request an TWRP version?

I am Korean, and it's very hard It's angry me............................

XDDDD I'm from South Korea too and the J727S is customized with the Knox Enrollment Service that blocks the wifi and cellular data AND apk installization. (trying to uninstall it )

I found this: https://www.androidinfotech.com/2018/02/root-samsung-galaxy-wide-2-sm-j727s-nougat.html

anyone habe twrp for this model ????

Hi.. I've this model also.. tried to downgrade..but it can't..always failed

My friend was installing the twrp to root a J7 metal.
Now the cell phone does not restart, and I do not know what the **** it did KKkkkkkkkkkk
It wants to remove the twrp without formatting the device.
If installing the original rom by Odin using home_csc does it return to normal without formatting?

Restore
CPI Justiceiro said:
My friend was installing the twrp to root a J7 metal.
Now the cell phone does not restart, and I do not know what the **** it did KKkkkkkkkkkk
It wants to remove the twrp without formatting the device.
If installing the original rom by Odin using home_csc does it return to normal without formatting?
Click to expand...
Click to collapse
If you have the firmware file the phone was on at the time he tried to Root it just flash the files using Odin an you should be good !

peter couniaz said:
If you have the firmware file the phone was on at the time he tried to Root it just flash the files using Odin an you should be good !
Click to expand...
Click to collapse
This is will make a clear data???
He canoot loose the data from the phone..

Home CSC file !
CPI Justiceiro said:
This is will make a clear data???
He canoot loose the data from the phone..
Click to expand...
Click to collapse
If he flashes the Home CSC file it may restore data but he may have to start from scratch ! Sorry an good luck !
P.S did he have it backed to Google if so Google will give the option to restore when you sign in !

Very hard to find twrp or cwm foe this model..also the combination file..and upgreded to android 9..

Related

Samsung On5 G550T1 MetroPCS REV0.4 stock OS anyone?

Hi All,
The short of a long story is that I just changed carriers and found out way late that I couldn't bring my Sprint phone to MetroPCS. So now I'm using the budget PCS On5 that came with the deal when we signed up.
I successfully loaded TRWP and then rooted however, I didn't know about FRP until it smacked me in the face. The root went fine but later SU prompted me to update the binary and when it did, it tripped factory reset protection and soft bricked my phone.
I want to reinstall stock OS on this phone but it appears that I have a software version that I haven't been able to find on the web yet. I found the stock rom for the MetroPCS On5 easily enough but it's Revision 0.0 and the box I have for the phone says REV0.4.
When I try to Odin Flash the REV0.0 version, I get SW REV CHECK FAIL DEVICE 2, BINARY 1 fail. So I guess I had the latest software on my phone and the phone thinks I'm trying to roll back using the 0.0 revsion.
My question is this, does anyone here have the stock rom for G550T1 REV0.4? Help!
If nobody does, maybe I can still fix this phone. I have a TRWP backup from the sister phone (same model same revision 0.4) that I'm using right now but I can't get back into TRWP on the soft bricked phone to recover that way to use the backup file.
Next I thought I might take the backup files and turn it into a rom and just flash that. However, with the tutorials I followed I kept running into problems. When I went to unpack the files per the tutorial, my rar software said that the file was corrupt. Maybe it is. but maybe not. It was my first time attempting to make a rom. If I can't find the software I need, could any of you Android geniuses help me get this backup into a flashable format?
I have to admit I'm daunted by the FRS in 5.0 and above. Is it defeatable? How do you root newer Android versions?
Thanks!
I did the same thing to my phone. did you get yours fixed?> if so could you provide me with the rom?
I haven't found the fix yet. Hopefully somebody will come through with a helping hand!
I finally got it figured out! So here is what i did and hopefully it will work for you.
1. I Odin flashed a good BL from the ROM REV0.0 floating around on the net. So at least I could now get into download mode.
2. Then I used Kies3 > Tools > Firmware Upgrade and Initialisation. It will ask you for your model number and then when you click ok it will ask you for a SN.
3. The trick is that Samsung doesn't put the SN that you need on the phone or the box. (personally, I couldn't find it on the phone either once I got it up and running) so go here: https://forum.xda-developers.com/android/general/root-samsung-galaxy-on5-t3435457/page46 and get a SN from post #454 and use that. (don't forget to say thanks)
4. Click Ok. Let it work, and max and relax.
Mine took about 10 minutes. Hopefully this will work for you too! Thanks XDA!
Help!
What is BL from the ROM REV0.0? I need your help, I have the MetroPCS On5 and I installed Reborn ON5 I want to go back to the MetroPCS ROM because the camera and the audio do not work and I tried to install the original ROM through Odin but it does not work I get an error. What I can do? I would like to use this method but I do not have very clear files needed.
You could help me bro, I'll thank you

How can I install a rom downloaded from here with odin?

Hello,
Currently My J7 got stuck on boot window, all i can i do is to be able to reach the download mode, therefore i downloaded a custom rom (this one: https://forum.xda-developers.com/galaxy-j7/development/rom-t3713641 )
But I can't flash this using Odin, I'm very new to this, so what's the problem? How can i install this rom using odin?
Custom ROMS are generally flashed via TWRP (or similar installations). Odin is used to fix issues using stock firmware. I'd Google search both in your case. If your phone is down, you may have to flash stock firmware (via Odin) first, then follow well documented root procedures for your device model number (I'm guessing it's the exynos J7 Tmobile or Metro PC variety judging from the rom you linked). First order of business would be correctly identifying your phone model, then proceeding from there. Happy hunting!
Aimless Rambler said:
Custom ROMS are generally flashed via TWRP (or similar installations). Odin is used to fix issues using stock firmware. I'd Google search both in your case. If your phone is down, you may have to flash stock firmware (via Odin) first, then follow well documented root procedures for your device model number (I'm guessing it's the exynos J7 Tmobile or Metro PC variety judging from the rom you linked). First order of business would be correctly identifying your phone model, then proceeding from there. Happy hunting!
Click to expand...
Click to collapse
My phone is J7(2015) and I'm downloading the stock rom right now. Thank you for the information!^^
mew1010 said:
My phone is J7(2015) and I'm downloading the stock rom right now. Thank you for the information!^^
Click to expand...
Click to collapse
No worries. I know the J7 has a plethora of sub-model numbers, it can be a little confusing. Just be sure to get as specific as possible regarding your specific device. The J700T for example needs J700T firmware, even though it fits into that broad range of Exynos J7 (or J7 2015). Thats the only J7 I'm familiar with, just stating the obvious need for precision. Good luck with flashing!

Help, need help rooting ZTE Grand x view 2

Hello all,
I got a ZTE Grand X view 2 (K81) tablet from virgin Mobile in Toronto, Canada and I have the sim locked to my imei number. I would like to root this tablet so I can remove unnecessary applications. It is slow as it has <1gb and the internal memory is 8gb. So far the one click root apps I have tried (kingroot, iroot) don't work. What are other options I have for this device?
It is running Android 7.1.1 with the June 1, 2017 security patches
Thanks Karl
binholz said:
Hello all,
I got a ZTE Grand X view 2 (K81) tablet from virgin Mobile in Toronto, Canada and I have the sim locked to my imei number. I would like to root this tablet so I can remove unnecessary applications. It is slow as it has <1gb and the internal memory is 8gb. So far the one click root apps I have tried (kingroot, iroot) don't work. What are other options I have for this device?
It is running Android 7.1.1 with the June 1, 2017 security patches
Thanks Karl
Click to expand...
Click to collapse
One-click root apps won't work. You either go the Magisk patched boot way or Custom recovery + Magisk / SuperSU zip.
What's your phone's chipset?
Hovatek said:
One-click root apps won't work. You either go the Magisk patched boot way or Custom recovery + Magisk / SuperSU zip.
What's your phone's chipset?
Click to expand...
Click to collapse
Honestly I don't really know what the chipset is. From CPU-X, here are some more details:
Cpu: cortex-a7 snapdragon 210, 1.1ghz x 4
Board: Helen
Hardware: qcom
Model: K81
Brand/manufacturer: zte
Bootloader: unknown
binholz said:
Honestly I don't really know what the chipset is. From CPU-X, here are some more details:
Cpu: cortex-a7 snapdragon 210, 1.1ghz x 4
Board: Helen
Hardware: qcom
Model: K81
Brand/manufacturer: zte
Bootloader: unknown
Click to expand...
Click to collapse
Its Qualcomm. To root, you'll need either stock boot.img or recovery.img. Do you have the firmware for your model?
Hovatek said:
Its Qualcomm. To root, you'll need either stock boot.img or recovery.img. Do you have the firmware for your model?
Click to expand...
Click to collapse
I don't have that yet, I will need to search for that. My SD card is currently set as an internal, not portable, is that a problem? Is there a way to copy the current boot.img or recovery.img from a running system? I have installed magisk manager, I just need to get a hold of the boot or recovery files
binholz said:
I don't have that yet, I will need to search for that. My SD card is currently set as an internal, not portable, is that a problem? Is there a way to copy the current boot.img or recovery.img from a running system? I have installed magisk manager, I just need to get a hold of the boot or recovery files
Click to expand...
Click to collapse
Have you had any luck finding firmware for this device.... i need to frp bypass mine as i bought it online and am left in a predicament now... The keyboard doesn't allow to access any settings so getting through the FRP part is an issue... no way to downgrade the firmware either because it is running 7.1 . I also can't find custom recoveries anywhere i look online.... if you have some insight or a solution please let me know.
thanks
wallyradburn said:
Have you had any luck finding firmware for this device.... i need to frp bypass mine as i bought it online and am left in a predicament now... The keyboard doesn't allow to access any settings so getting through the FRP part is an issue... no way to downgrade the firmware either because it is running 7.1 . I also can't find custom recoveries anywhere i look online.... if you have some insight or a solution please let me know.
thanks
Click to expand...
Click to collapse
Not yet, I switched my SD card back to portable and tried to look around the system using adb shell without any luck. The system is locked down tight and I don't have permission to view most directories. I also contacted ZTE for the recovery img, they thought I was talking about backing up photos
I have same tablet from virgin mobile Canada. I have solid explorer, and it allows me to have root file access out of the box. I deleted bloat apks, was gtg. Not sure if it's normal behavior. I was shocked to see root file system out of the box. P.S any developers that a full system dump would help, I can probably do. After more poking around, I don't have full root access, but I do have read/write to system folder with build.prop etc
jonjadot said:
I have same tablet from virgin mobile Canada. I have solid explorer, and it allows me to have root file access out of the box. I deleted bloat apks, was gtg. Not sure if it's normal behavior. I was shocked to see root file system out of the box. P.S any developers that a full system dump would help, I can probably do. After more poking around, I don't have full root access, but I do have read/write to system folder with build.prop etc
Click to expand...
Click to collapse
I just downloaded and installed solid explorer and the classic versions. Not luck viewing the / file system. If you can get the boot file and post a link to it that would be helpful for the magisk rooting method.
-I was able to use a google account manager app and downloaded/installed qucik_shortcut_2.4.0 this allows you access the launcher and partially use this device... I was able to set the username of the device but to no avail i am unable to use that combo to strip out the previous user's information. there's a method online to show you how to use the talkback settings to get to this point and i used my knowledge of frp bypassing samsung devices to get a little further. the developer options setting is still locked because it doesn't recognize me as the primary user. Its very frustrating. I'm able to sign into chrome with my credentials and access gmail through the browser but as far as getting my account onto this device its been days of trying and my girlfriend is just disgusted with my persistence. I don't know if or when an oreo update will be made available that this will help solve the problem, but i can't believe zte doesn't have the stock firmware anywhere online.
any of you fellow nerds out there that can help please do... I use an S3 for my daily use because well, they're so amazing to customize but the battery is crap because its so old. One thing i have found is with this zte you can at least play the "catch the cat" easter egg game, which is a complete waste of time but fun at the same time.
I'm not sure if this will help but i might as well. I'm also stuck with a zteK81 i'd REALLY love to root. I never had to go really deep into android stuff so tbh ... i've read alot ... but beside knowing i can't root it yet after a couple diff. method... im a bit confuse in all that. Up here i read ppls about looking for the Firmwire and someone else searching for the root. I have pull some pretty deep layer files in mine that may .. may not help you guys. I can't read that correctly. Here's 3 images and i have a little 7z with the actual files and 3-4 more if someone request it. Thanks.
hxxps://i.imgur.com/NVNpLpfh.png ---- Treeview
hxxps://imgur.com/8GLP2xJ ----- surfacelay.XML
hxxps://imgur.com/kcnDAY9 ----- surfacelay. XML
hxxps://imgur.com/oqIaDeR ----- lib. of a dna_file??
EDIT: Firmwire file --> hxxp://download.ztedevices.com/device/global/support/opensource/mobilephones/open_source_notice.html#id45
i found a download for this device's kernel source
hxxp://download.ztedevices.com/device/global/support/opensource/2/20170823_01/P890R81_USCCV1.0.0B08_kernel.tar.gz
im working on getting a stock system image of this tablet from ZTE. im not sure exactly whats needed to get an official twrp and rom going for this tablet but ill help in any way i can
Stock Rom
Online Gravy said:
im working on getting a stock system image of this tablet from ZTE. im not sure exactly whats needed to get an official twrp and rom going for this tablet but ill help in any way i can
Click to expand...
Click to collapse
I have a copy of the stock ROM. Who knows how to use it to develop a custom recovery for the K81?
Continued Interest
Is there any interest in rooting the ZTE K81?
Currently, I have a copy of the stock ROM and am trying to modify update.zip using Magisk to mod the boot.img file. I heed help with the signing of the modified update.zip package.
Any Suggestions?
There's no way of flashing an unsigned rom?
Sent from my Nexus 6P using Tapatalk
binholz said:
There's no way of flashing an unsigned rom?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Sadly, no.
Difficulties
To date I have found no way to even perform the OEM Unlock on this device and none of the available rooting schemas are of any use.
If I cannot determine how the sing the modified update.zip file, I am out of ideas.
I have a copy of the ZTE stock rom for the K81 and, if there is a more experienced person willing to take a shot at this, I will happily make the rom available to them.
ritzar12 said:
To date I have found no way to even perform the OEM Unlock on this device and none of the available rooting schemas are of any use.
If I cannot determine how the sing the modified update.zip file, I am out of ideas.
I have a copy of the ZTE stock rom for the K81 and, if there is a more experienced person willing to take a shot at this, I will happily make the rom available to them.
Click to expand...
Click to collapse
Hello, so it is common that ZTE's don't have any form of fastboot. So your only way is to flash via QPST with a firehose. But today is your lucky day. I was able to extract the k81's firehose from the Rogers ZTE firmware flashing tool. I have also downloaded the full QPST firmware fire and included the firehose with it. As well as a separate download in case someone already has it. I will also be ordering the device shortly. If you have newer firmware, or one designed for a variant other the rogers would be great if you can share it.
Rogers B05 Firmware
https://www.androidfilehost.com/?fid=1395089523397891291
Separate Firehose download
https://www.androidfilehost.com/?fid=1395089523397891292
Rogers ZTE FIrmware flashing tool (Not really useful just linking because its how I got the firehose)
https://www.androidfilehost.com/?fid=1395089523397891290
ZTE Kernel source mirror (We are codenamed Helen)
https://www.androidfilehost.com/?fid=1395089523397891289
Frustration intensifies...
deadman96385 said:
Hello, so it is common that ZTE's don't have any form of fastboot. So your only way is to flash via QPST with a firehose. But today is your lucky day. I was able to extract the k81's firehose from the Rogers ZTE firmware flashing tool. I have also downloaded the full QPST firmware fire and included the firehose with it. As well as a separate download in case someone already has it. I will also be ordering the device shortly. If you have newer firmware, or one designed for a variant other the rogers would be great if you can share it.
Rogers B05 Firmware
https://www.androidfilehost.com/?fid=1395089523397891291
Separate Firehose download
https://www.androidfilehost.com/?fid=1395089523397891292
Rogers ZTE FIrmware flashing tool (Not really useful just linking because its how I got the firehose)
https://www.androidfilehost.com/?fid=1395089523397891290
ZTE Kernel source mirror (We are codenamed Helen)
https://www.androidfilehost.com/?fid=1395089523397891289
Click to expand...
Click to collapse
Where do you get or how do you create the rawprogram0.xml file. Presumably the directory structure information is available somewhere in the kernel or the ROM but, methods to extract the information into an XML evade me.

SM-G930A 6.0.1 unlocked running on T-Mobile flash to SM-G930T 8.0?

Hey guys,
My dad has a SM-G930A 6.0.1 unlocked running on T-Mobile. It is starting to show it's age (battery drain, apps not running like they should, etc.) and is still stuck on 6.0.1.. From my understanding, it should be possible to flash to SM-G930T, however I am a bit lost as to where to begin the process to do so. I tired going straight to 8.0 by flashing the SM-G930T 8.0 firmware files but this didn't work (I didn't think it would work, but it was worth a try). With that said, would it be better for me to just stick to updating to SM-G930A 7.0 via the guides posted, or is there a way for me to Flash the SM-930T 8.0 firmware? Thanks in advance.
leprkon said:
Hey guys,
My dad has a SM-G930A 6.0.1 unlocked running on T-Mobile. It is starting to show it's age (battery drain, apps not running like they should, etc.) and is still stuck on 6.0.1.. From my understanding, it should be possible to flash to SM-G930T, however I am a bit lost as to where to begin the process to do so. I tired going straight to 8.0 by flashing the SM-G930T 8.0 firmware files but this didn't work (I didn't think it would work, but it was worth a try). With that said, would it be better for me to just stick to updating to SM-G930A 7.0 via the guides posted, or is there a way for me to Flash the SM-930T 8.0 firmware? Thanks in advance.
Click to expand...
Click to collapse
Wow you guys really get screwed over there in the US with cell phones. It's a pain in the a** to do anything with your phones.
Anyway I'm guessing the phone was originally AT&T right? And now it's unlocked to any carrier.
If you just want to update the phone to the latest firmware then just flash AT&T Oreo. It won't affect the SIM it will still work as before.
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Make sure you back up all the things you want to keep before flashing
cooltt said:
Wow you guys really get screwed over there in the US with cell phones. It's a pain in the a** to do anything with your phones.
Anyway I'm guessing the phone was originally AT&T right? And now it's unlocked to any carrier.
If you just want to update the phone to the latest firmware then just flash AT&T Oreo. It won't affect the SIM it will still work as before.
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Make sure you back up all the things you want to keep before flashing
Click to expand...
Click to collapse
Thanks for the reply! I appreciate the direction. You are right, US phones are a pain. And yes, the phone was originally an AT&T phone, but was unlocked.
As for unlocking the bootloader, I've found different sources that say that unlocking the bootloader on this particular phone is not possible with this particular phone. I did read something about an engineering bootloader being used to get around a locked bootloader for rooting. Could this be used for flashing as well?
cooltt said:
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Click to expand...
Click to collapse
That's not entirely true. Using Odin you can flash any USA firmware onto any other USA device, no bootloader unlocking required.
It's very common for people to flash G930U over their G930V/T/A/P devices to remove bloatware
leprkon said:
As for unlocking the bootloader, I've found different sources that say that unlocking the bootloader on this particular phone is not possible with this particular phone. I did read something about an engineering bootloader being used to get around a locked bootloader for rooting. Could this be used for flashing as well?
Click to expand...
Click to collapse
It's unstable and only lets the device charge up to 80%, your best bet woulld just be a full flash with Odin
This guide is a bit dated but it's the best one out there. Just make sure you google the latest Odin and use all 4 firmware files when flashing https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Beanvee7 said:
That's not entirely true. Using Odin you can flash any USA firmware onto any other USA device, no bootloader unlocking required.
It's very common for people to flash G930U over their G930V/T/A/P devices to remove bloatware
It's unstable and only lets the device charge up to 80%, your best bet woulld just be a full flash with Odin
This guide is a bit dated but it's the best one out there. Just make sure you google the latest Odin and use all 4 firmware files when flashing https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks for the reply! I had tried flashing the 8.0 G930T variant last night with the latest version of Odin and the PrinceComsy version and got a Model Mismatch error. I read that the modified Odin3 v3.13.1_3B_PatcheD would let me flash the firmware and ignore the Model Mismatch error. However, I didn't go through with it because I was not sure if I would brick my phone and instead erred on the side of caution and made my post here. Would I be safe to flash the files from SM-G930T_1_20180625111401_xf3965l42p_fac onto my current device?
If your firmware files are from a trusted source like sammobile, updato or samfirmtool then it should be fine
Odin3 v3.13.1_3B_PatcheD seems to have positive feedback here on XDA so should be fine too https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Beanvee7 said:
If your firmware files are from a trusted source like sammobile, updato or samfirmtool then it should be fine
Odin3 v3.13.1_3B_PatcheD seems to have positive feedback here on XDA so should be fine too https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
Thanks for the assist! Everything worked like a charm!
leprkon said:
Thanks for the assist! Everything worked like a charm!
Click to expand...
Click to collapse
Great glad it all worked out
leprkon said:
Thanks for the assist! Everything worked like a charm!
Click to expand...
Click to collapse
Greetings-
I apologize for jumping in an already created thread, but I think I am in the same situation, and like to verify with you both before I use the advice please. I have a SM-G930T that I just purchased, and really like to run a custom rom. But I understand I can not because I have Android 8 on it. I know how to use Odin, and have the latest version plus you guys talked about it here. I have also already downloaded the stock rom from sammobile site. What are my options? Is there a rom I can flash the phone with using Odin that would provide better performance, less G..bage, and more battery life? Is there a way for me to root the phone? I really need an app that requires the phone to be rooted.
Thanks
[email protected] said:
Greetings-
I apologize for jumping in an already created thread, but I think I am in the same situation, and like to verify with you both before I use the advice please. I have a SM-G930T that I just purchased, and really like to run a custom rom. But I understand I can not because I have Android 8 on it. I know how to use Odin, and have the latest version plus you guys talked about it here. I have also already downloaded the stock rom from sammobile site. What are my options? Is there a rom I can flash the phone with using Odin that would provide better performance, less G..bage, and more battery life? Is there a way for me to root the phone? I really need an app that requires the phone to be rooted.
Ok, so flash any unbranded Stock Rom for your device using this version of Odin which has been specifically modified to flash US devices. https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572 PatcheD.zip is the file you want to download.
Then when you have checked the phone is working ok on undrnaded firmware you can go ahead and root the device using this method which is again for US Qualcomm devices. https://www.****************/2018/0...on-galaxy-s7-and-s7-edge-on-android-8-0-oreo/
Take you time and read instructions.
Click to expand...
Click to collapse
Can I get unbranded stock firmware from sammobile? I understand the generic meaning of it, but I need more information on how to get them and what I need to know to work with them.
[email protected] said:
Can I get unbranded stock firmware from sammobile? I understand the generic meaning of it, but I need more information on how to get them and what I need to know to work with them.
Click to expand...
Click to collapse
If I understand it correctly there is no unbranded firmware for the US, its all network specific but you can flash unbranded UK firmware and it will work fine, UK BTU is the one you want from sammobile.
Load into the modified version of Odin and flash.
This is what I found, and downloading.
[email protected] said:
This is what I found, and downloading.
Click to expand...
Click to collapse
Yes that's the right one but like the beanvee and i have said there is a specific way to flash this stock then root the device.
You also need Samsung USB drivers installed so your pc can talk to your device, there's plenty of guides around how to flash with Odin and what you need to do beforehand, the only difference with you is the version of Odin your using and then the method of rooting afterwards.
cooltt said:
Yes that's the right one but like the beanvee and i have said there is a specific way to flash this stock then root the device.
You also need Samsung USB drivers installed so your pc can talk to your device, there's plenty of guides around how to flash with Odin and what you need to do beforehand, the only difference with you is the version of Odin your using and then the method of rooting afterwards.
Click to expand...
Click to collapse
Thanks. I have used Odin before, and I already downloaded the patchD version of Odin from the link. Thank you so much. I'll keep you posted on how it turns out. I still do not have a verified version of a custom recovery for this. Do you guys know of any? I found this link but the link to the suggested twrp does not work. I think it is this one. But I can not be sure. The original link points to a slightly different url.
[email protected] said:
Thanks. I have used Odin before, and I already downloaded the patchD version of Odin from the link. Thank you so much. I'll keep you posted on how it turns out. I still do not have a verified version of a custom recovery for this. Do you guys know of any? I found this link but the link to the suggested twrp does not work. I think it is this one. But I can not be sure. The original link points to a slightly different url.
Click to expand...
Click to collapse
Nope do not use that TWRP, it will flash TWRP but not boot it and you'll be stuck on Samsung logo forever.
There is still no way to unlock a Qualcomm snapdragon bootloader and i'm not sure anyone is working on it anymore.
All it means is you need to flash custom Roms via Odin or possibly the inbuilt S7 recovery, you just need to check the ROM is in a format which can be flashed that way.
With regards to finding a TWRP solution you'll have to do some serious searching on google and read everything.
There are already several de-bloated stock Roms on the forum if thats what you want to do. Root and custom recovery TWRP are two different things though, you get rooted so your good to go?
cooltt said:
Nope do not use that TWRP, it will flash TWRP but not boot it and you'll be stuck on Samsung logo forever.
There is still no way to unlock a Qualcomm snapdragon bootloader and i'm not sure anyone is working on it anymore.
All it means is you need to flash custom Roms via Odin or possibly the inbuilt S7 recovery, you just need to check the ROM is in a format which can be flashed that way.
With regards to finding a TWRP solution you'll have to do some serious searching on google and read everything.
There are already several de-bloated stock Roms on the forum if thats what you want to do. Root and custom recovery TWRP are two different things though, you get rooted so your good to go?
Click to expand...
Click to collapse
Yes root is my main goal, and you are right the debloated roms will work just fine. I can do w/o twrp. Just double checking here; since I am flashing the UK rom, and I believe one of the comments on this thread was how US images are locked tighter, would not I be able to find a UK version of TWRP for my phone? Just checking.
[email protected] said:
Yes root is my main goal, and you are right the debloated roms will work just fine. I can do w/o twrp. Just double checking here; since I am flashing the UK rom, and I believe one of the comments on this thread was how US images are locked tighter, would not I be able to find a UK version of TWRP for my phone? Just checking.
Click to expand...
Click to collapse
Now pull up a chair and listen closely.....99% of the American devices (including yours) have an extremely uncooperative Qualcommm Snapdragon cpu at it's heart and thus refuses point blank to play ball. The online community have done a fantastic job creating the modifications you are now using. The rest of the world (i'm happy to say) enjoy the S7 with an extreamly cooperative Exynos cpu at it's heart. It just loves to be fiddled with, it's a whore of a chip, constantly on the go with all kinds of neat tricks.
Anyhoo... my point is, the software has to be compatible with the hardware you catch my drift? All the cool little programs are written with a specific piece of hardware in mind, unfortunately for you guys Qualcomm is the ice queen.
cooltt said:
Now pull up a chair and listen closely.....99% of the American devices (including yours) have an extremely uncooperative Qualcommm Snapdragon cpu at it's heart and thus refuses point blank to play ball. The online community have done a fantastic job creating the modifications you are now using. The rest of the world (i'm happy to say) enjoy the S7 with an extreamly cooperative Exynos cpu at it's heart. It just loves to be fiddled with, it's a whore of a chip, constantly on the go with all kinds of neat tricks.
Anyhoo... my point is, the software has to be compatible with the hardware you catch my drift? All the cool little programs are written with a specific piece of hardware in mind, unfortunately for you guys Qualcomm is the ice queen.
Click to expand...
Click to collapse
Thank you so much. You guys are amazingly patient, and informative. Thank you for educating me, and helping me achieve my goal.
I have tried a few times but can not flash the files. I have attached screenshots, and followed the instructions here. Do you see anything I should be doing differently?
I initially thought the code came as one tar file, which I could flash, but it was a zip file, which I had to unpack.

SM-G930U root for v9 Bootloader "G930UUEU9CSA3"

i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
snaksalot said:
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
Click to expand...
Click to collapse
That wasn't very clever was it.
Should never update branded unless it's to fix a major bug. Any loophole which allows root or flash is closed on an update until someone figures out how to root on the new boot loader.
I think the best advice to anyone on US networks is to flash unbranded and go from there.
snaksalot said:
i got the latest security update via OTA and an now running the G930UUEU9CSA3 firmware, ive tried flashing the eng boot img i originally used to root from here "https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616" but odin fails every time, i'm pretty sure its because the new security update updated the bootloader also... to version 9. now i guess my question is are there any eng boot files for the v9 bootloader available yet? or any other usable root methods available?
Click to expand...
Click to collapse
Get magisk.zip from internet , move to a sdcard insert sdcart to s7, Flash twrp for s7 then format data then click install magisk.zip reboot after finish and done.
kpwnApps said:
Get magisk.zip from internet , move to a sdcard insert sdcart to s7, Flash twrp for s7 then format data then click install magisk.zip reboot after finish and done.
Click to expand...
Click to collapse
I'm fairly certain that the only twrp for the s7 is a temporary one because there is no unlock for the bootloader, and even still the temp twrp is only compatible with the v4 bootloader and I am currently on v9.... that is unless I'm mistaken if I am then please someone correct me and point me in the right direction because I'd love to be running magisk on my s7 : )
cooltt said:
That wasn't very clever was it.
Should never update branded unless it's to fix a major bug. Any loophole which allows root or flash is closed on an update until someone figures out how to root on the new boot loader.
I think the best advice to anyone on US networks is to flash unbranded and go from there.
Click to expand...
Click to collapse
No it most definitely was not very clever at all and unfortunately I'm stuck : / Also is the G930UUEU9CSA3 firmware not unbranded?
snaksalot said:
No it most definitely was not very clever at all and unfortunately I'm stuck : / Also is the G930UUEU9CSA3 firmware not unbranded?
Click to expand...
Click to collapse
Yes it is I didn't read properly. Anyway what odin are you using to flash? The modified one?
We are talking about a qualcomm device yes?
cooltt said:
Yes it is I didn't read properly. Anyway what odin are you using to flash? The modified one?
We are talking about a qualcomm device yes?
Click to expand...
Click to collapse
Yes I'm using the modified Odin and all my previous attempts at flashing the eng boot files via Odin on the v8 bootloader have been successful, it wasn't until after the OTA that I started having issues.
And yes this is Qualcomm : )
snaksalot said:
Yes I'm using the modified Odin and all my previous attempts at flashing the eng boot files via Odin on the v8 bootloader have been successful, it wasn't until after the OTA that I started having issues.
And yes this is Qualcomm : )
Click to expand...
Click to collapse
Hmmm so it may be that loophole is now closed, what you need to think about is if you deffo need root? Or is it just nice to have. I'm sure a dev will get round it soon.
snaksalot said:
I'm fairly certain that the only twrp for the s7 is a temporary one because there is no unlock for the bootloader, and even still the temp twrp is only compatible with the v4 bootloader and I am currently on v9.... that is unless I'm mistaken if I am then please someone correct me and point me in the right direction because I'd love to be running magisk on my s7 : )
Click to expand...
Click to collapse
Twrp will work certainly, i did on my own s7 qualcomm variant with this https://www.google.com/amp/s/forum....de-how-to-root-android-8-0-oreo-t3840271/amp/
kpwnApps said:
Twrp will work certainly, i did on my own s7 qualcomm variant with this https://www.google.com/amp/s/forum....de-how-to-root-android-8-0-oreo-t3840271/amp/
Click to expand...
Click to collapse
Okay I was completely unaware of TWRP being an option or the possibility of Magisk with a locked bootloader, now to clarify I'm running the latest unbranded US Region firmware for the US T-Mobile version of the Qualcomm Galaxy S7 "(TMB) G930UUEU9CSA3" that being said I have a few questions about how to specifically to proceed if you don't mind helping me?
First is the version of Odin available from the post provided above inst the modified version I've been required to use for all my previous flashing "Odin3_v3.13.1_3B_PatcheD" should I use this one or the version provided in the post above "Odin3_v3.13.1"?
My next question is that all the different versions and variants of TWRP available for my device the Galaxy S7 and the S7 Edge are either for Exynos Canada/International or Korea or the Chinese Qualcomm variant of each. Should I download and use the TWRP for the Chinese Qualcomm S7?
The sammobile link in the original post for "Android 8.0 Oreo Stock Rom" provides me with a list of the latest and up to date international versions of firmware for the Galaxy S7 Edge "SM-G935FD" I'm assuming I should just use the stock firmware image for my device "SM-G930U" instead?
The link for the no-verity-opt-encrypt-6.0 is dead but I don't think its needed because of something someone said in the original post about this method failing after latest security update "the one I'm on" https://forum.xda-developers.com/showpost.php?p=78115895&postcount=18 he said he solved it easily with information and another flash able zip from this post https://forum.xda-developers.com/showpost.php?p=77000849&postcount=47 and the zip from here https://forum.xda-developers.com/showpost.php?p=76564735&postcount=37
All that being said I haven't attempted anything yet, I'll try the above method as I understand it later this evening and I'll post my results
snaksalot said:
All that being said I haven't attempted anything yet, I'll try the above method as I understand it later this evening and I'll post my results
Click to expand...
Click to collapse
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
cooltt said:
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
Click to expand...
Click to collapse
I'd be interested to know how this turned out if the device with V9 bootloader could be rooted with temp TWRP method.
Can i actually flash magisk on my 930u?
Is there any way to root my g930t ?
I'm on v9 bootloader, and i don't care about knox tripping.
Did developpers really failed to break the security of this little old device ? Or no one worked it ?
cooltt said:
Hello there, i deleted most of your post because i didn't want my post to be huge. So if i just give you some guidelines hopefully you can have a look around for the files you need.
1. For Qualcomm / snapdragon devices you must always use the patched version of Odin you already have. Now this version of Odin can be dangerous if you don't flash the correct firmware for your device because it ignores device mismatch and other safety measures the normal Odin checks for before flashing. Which brings me to.....
2. Anything for G935 will not work for G930 including TWRP, you must always use firmware, patches twrp which specifically says it for G930 Qualcomm/snapdragon devices.
3. The China/ Korea Qualcomm/snapdragon devices are exactly the same as the US devices, anything working on the China / Korea devices will work on the US device.
Now i know you want to root unbranded on V9 but as you are on the T Mobile network it may be easier to flash and root T Mobile Oreo for the time being until there is a workaround root for V9 unbranded.
All of the threads you linked to were for G935 devices and i've mentioned you can't use those patches BUT the process and step by step instructions you follow are the same for your device. So you can follow those guides as long as you are using the patches for your device.
There is a Snapdragon section on this forum so thats a good place to look.
I've had a quick look for this specific firmware and can't find anything about rooting the U9 version yet.....
I'm just checking this firmware G930UUEU9CSA3 your running did have either XAA or USC code next to it when you downloaded? I've noticed Verizon, AT&T and Sprint are using the same firmware VZN, ATT, XAS.
Click to expand...
Click to collapse
Would this info be applicable to edge models as well? Pretty sure our moderator has moved on as he is disgusted with samsungs persistance in blocking root with new bl versions. Im on an unlocked tmo s7 edge with the u firmware as well.
Toolmighty said:
Would this info be applicable to edge models as well? Pretty sure our moderator has moved on as he is disgusted with samsungs persistance in blocking root with new bl versions. Im on an unlocked tmo s7 edge with the u firmware as well.
Click to expand...
Click to collapse
Yes same hardware
cooltt said:
Yes same hardware
Click to expand...
Click to collapse
Can't get twrp to flash. Tried w rom as is, tried factory reset tried reinstall w/o auto reboot. All get same error
what about jruze root?
what about https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616 then flash from safestrap, format data, decript script?
nm it uses flashfire
Toolmighty said:
what about https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616 then flash from safestrap, format data, decript script?
Click to expand...
Click to collapse
Yes by using 1st and #1623 post number it can be rooted easily. I already have done that on both G930P and G930U.

Categories

Resources