Which mode spreadtrum upgrade tool use to connect and flash ROM. Is it adb, fastboot, download mode or bootloader mode? Because I am unable to see any adb or fastboot device connected in console.
My phone is dead and unable to power on but it is charging and light come up when connected with charger. Also on holding vol- phone is detected as SPD u2s diag and SPD com enumerator in device manager.
Related
Software version : MA 1.7.12 N8
Total Disk Space : 8G
Adb in normal startups and fastboot in bootloader mode ( after pressing power + volume down ) are not working
Could anyone tell me how to solve this Thanks in advance
Have you enabled USB Debugging?
I don't think there's an option to enable USB Debugging in the original system before getting into fastboot and rooting the device.
Are you able to boot into the ROM? You just can't use adb & fastboot?
Yes I can boot into the ROM. It's the original ROM. And I can't use adb or fastboot.
You have a start button? Try start + power to boot into fastboot mode.
Thanks for your reply&time.
I believe that power + volume down is the way to boot into fastboot now, and after booting into fastboot and connecting the USB line, (fastboot devices) command in the computer (tried Mac OS X 10.8, Windows XP virtual machine and Windows 7) shows no device connected. When using start+power, my device boots normally into the original rom.
All right. I think I just got rid of the fastboot issue. There's something missing with the driver. I'll post my solution after I verify it and flash DPRom successfully.
The problem is acutually pretty silly. A proper adb driver is required for fastboot.
I installed tineprogramming's adb driver to fix it.
(http://forum.xda-developers.com/showthread.php?t=1454685)
Trying to connect via Fastboot, device manager recognizes the phone as Mass Storage device so i can't enter into fasboot mode to flash it. I have a wrong Recovery that boots but doesn't make me select any option. Windows 8 also recognizes it as Vodafone Smart II.
I need to know:
- How can i Unbrick this device?
Notes:
- Have Adb drivers, fastboot drives, broadcom drivers, Qualcom drivers
- Have ROM Files
- No acces to operative system (I said its bricked)
- Installed a wrong cwm recovery, its boots into but no Ok button working.
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
You need to connect your phone is flashmode
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
elroyjolew said:
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
Click to expand...
Click to collapse
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Knightfuryz said:
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Click to expand...
Click to collapse
elroyjolew said:
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
Click to expand...
Click to collapse
Make a factory reset
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
how to connect in flashmode without using the buttons?im stock in sony logo and i need to turn on usb debugging to use flashtool
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Nikhil kuttu said:
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Click to expand...
Click to collapse
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Manas1796 said:
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Click to expand...
Click to collapse
the drivers will be on the flash tool folder just open the app then tick drivers for Xperia L (thoshan) and general fast boot drivers.
and use the latest flash tool if you can ( Now I am using a Mac so I have a flash tool which was made for apple. but I used to flash my phone using windows and this is the version of the flash tool "flashtool-0.9.18.5" and this worked fine for me ).
if anything else is needed just reply
after Install qualcomm drivers ver 1.1 and connecting Dead Yuphoria Via Usb Windows Stucks ..(tried xp,7,8,8.1,10)
No Port Detected In QFil Tool
PORT Gets Detected in Safe mode but says "cannot connect to comport"
SDCARD Dumb Doesn't Boot up download mode ... Helpp.....
after Install qualcomm drivers ver 1.1 and connecting Dead Yuphoria Via Usb Windows Stucks ..(tried xp,7,8,8.1,10)
No Port Detected In QFil Tool
PORT Gets Detected in Safe mode but says "cannot connect to comport"
SDCARD Dumb Doesn't Boot up download mode ... Helpp.....
Can someone please give me some clue on how I can boot into download mode again so I can root my phone again. I dont know what I did or maybe the upgrade change some setting where I am not able to go to download mode. I've tried every possible way that I can think of to get to to download mode but it just boot up normally. I've tried it with the hard buttons way, try to boot from recovery to download and even try it with phone off and pressing the vol - n + n power button then pluging the usb in the phone while connected to pc. Still none of those way work. So if anyone know another ways to get boot into download mode please tell me now.
Requirements:
USB Debugging -ON
OEM Unlock -ON
Working rooted or unrooted Android device
USB cable and PC
Installed your device USB driver
Android debugging bridge “adb”
Steps:
Enable USB debugging on your android device.
Install adb and USB driver for your device model Samsung, HTC, Sony, LG, Motorola, Google.
Connect your device to PC by USB cable
To boot into download mode for Samsung devices type in cmd window :
adb reboot download
To boot into bootloader mode for most Android devices type in cmd window :
adb reboot-bootloaderreboot-bootloader
To boot into recovery mode for all Android devices type in cmd window :
adb reboot recovery