Hi!
My device: S8+ (rooted.)
Installed and working Playstation Remote play on S8+, can use touch buttons to navigate and play, BUT!
With the Playstation Dualshock 4 controller connected with USB (OTG) it's not responding in the remote play app when app is connected to the playstation 4 and shows video, the controller works outside the connection to the ps4. When just in the application of the Remote Play app i can navigate with the controller but not after I connect the remote play to the ps4, only the touch button on the phone screen works then.
And by bluetooth it's very buggy, it dosent even connect or just freezes when trying to establish bluetooth connection betwen the phone and the controller.
Any ideas?
Thanks!
Is it a first or second gen controller?
Would you mind pming me the link for remote play? I've only found outdated apks.. sorry can't help other wise though.
MansonDroid said:
Is it a first or second gen controller?
Click to expand...
Click to collapse
First generating of D4.
SageChrono said:
Would you mind pming me the link for remote play? I've only found outdated apks.. sorry can't help other wise though.
Click to expand...
Click to collapse
Sure thing, I'll give the link here so everyone can benefit from it ? you can find it down here below:
PS4 Remote Play v2.0.0.apk --> https://forum.xda-developers.com/apps/magisk/module-ps-remote-play-enabler-t3575876
I've tried this tool but it was hard for me to succeed...
I managed to change master ID and found the dualshock 4 in the PC program so I could find its Bluetooth address but I can't go further than that...
http://dancingpixelstudios.com/sixaxis-controller/sixaxispairtool/
Edit:
Managed to get connected with bluetooth now, se few comments below this, but it did not help with the responding in remote play app to recognize the inputs from the dualshock 4.
This is how I have it at the moment.
And here is a guide as well but his dualshock is connected to the ps4 and remote play on the phone is signed in on a second account on the ps4, the bad thing is the latency and you cannot be too far away from the ps4.
https://www.xda-developers.com/how-...ny-android-and-play-dualshock-4-tips-opinion/
Okej, getting closer but still not there yet.
Managed to connect now the Dualshock 4 controller to the phone with bluetooth.
Sixaxis method as mentioned in the beginning here, but the in the remote play when it's connected to the PS4 and showing the screening of the PS4 in the remote play, the controller dose nothing, it's like it dose not detect anything from the controller.
But when i disconnect but still in the remote play app i can navigate in the app menue in the remote play as normal with the Dualshock 4 controller, it do recognize the inputs from the controller in the app but stops to recognize directly after i connect the remote play to the ps4.......
Sixaxis connection method - Dualshock 4 to your android phone, works on Samsung Galaxy S8+ (rooted)
https://www.youtube.com/watch?v=PV9OziAhZso
Troubleshooting:
If you cannot se your local device bluetooth adress showing in the sixaxis app, do this:
(Bluetooth must be enabled)
1. From the Home screen, open the app drawer, then open “Settings“.
2. Scroll down to the bottom and tap “About Phone“, “About device“, or “About tablet“.
3. Scroll down to the bottom and tap “Status“.
4. Scroll down and the “Bluetooth address” will be shown in the list.
Now copy it so you can enter it in the PC/MAC program when connecting the D4 to the PC/MAC.
Related
today i was trying to pair my ps3 controller with sixaxis but it would connect to the bluetooth settings but not the app and the reason is so i can use my mappings for games. is there a way to not let connect to the settings?
I think it has to connect to the bluetooth. If it doesn't connect to the bluetooth, how will it connect to your transformer. I got working just fine on mine. Just follow the instructions on the website.
typci said:
I think it has to connect to the bluetooth. If it doesn't connect to the bluetooth, how will it connect to your transformer. I got working just fine on mine. Just follow the instructions on the website.
Click to expand...
Click to collapse
I think the question is not related to the bluetooth pairing itself but to the way to setup the key mapping of the control or.
In some apps we have the possibility to do that by a setup managed by the apps itself but for other there is no setup possible.
The question is how can we make the setup of the key mapping : for example in some game to use the fire key I have to press start. It will be better to use for example the cross for that.
Have you ever wanted to play games on your android phone using your PS3 Sixaxis Controller wirelessly?
Today iam going to tell you step by step how to play games on your android phone using the PS3 Controller.
This method is already tested by me and iam play Asphalt 8 on my Noir A900.
Things you Need
Android Device obviously
Rooted Phone
Dualshock 3 (Sixaxis) controller.
Sixaxis Compatibility Checker Get it from Google Play
Sixaxis Controller Get it from Google Play
SixaxisPairTool Download it from Here
How to Connect your Ps3 Sixaxis Controller
Open Sixaxis Compatibility Checker.
You'll get a message, press OK.
Now press Start.Grant the Superuser permissions.
If your device is supported, you will get a message telling you that.Your device appears to be supported.Click the stop button and exit the App
If you did not get that message then you better stop now or you can try your luck if you want to
If Supported Continue
Now open the Sixaxis Controller App and click the start button,Grant the super user permission, You will get a "Local Bluetooth Adress" at the bottom of the application.
Get back to your computer install SixaxisPairTool, Install it, Go to Installed Directory and Run it As Administrator by right clicking your mouse
The SixaxisPairTool will open,now connect your Dualshock 3 (Sixaxis) controller to pc using the Cable,wait it will search for the Current master.
On the Sixaxis Pair Tool application. You will see an empty box. On this box write the Local Bluetooth Adress that is shown on the Sixaxis Controller app on your Android.
Once you are done writing click the Update button. You will see that the Master Adress it's updated to what you have wrote, specifically, it's updated to what the app on your Android show up.
Now unplug the controller from your PC
Press the PS button on your controller and get to your Android to see what happens.
Congratulations, your Dualshock 3 is now connected to your Android device.
Dont forget to tell us if this worked for you. Hit the thank button if i Helped you Enjoy...
Offcial Thread
Thanks i will try it after work.
I hate it to play games with screen buttons, hope this works for me
RyperX said:
Thanks i will try it after work.
I hate it to play games with screen buttons, hope this works for me
Click to expand...
Click to collapse
so it worked for you?
after failing first method. Second method works in the checker, and connects to controller. However in sixaxis control app, fails on first method but there is no second method like im the checker. Why does it work in the checker and show the controller working but not in the controller app?
So I am posting this everywhere as I found very little information about how to do this and trouble shooting some issues. Made a reddit post and going to post it here (I hope this is a proper place to put this).
Just hold down the PS button and Share till the light starts to flash. Go to your Bluetooth and pair the game controller.
Trouble shooting suggestions are on bottom.
Now after about 30sec, and for some unknown reason, you will run into input lag. To fix this you will need to download an app called Bluetooth Auto Connect. Once installed goto Advanced Options - Connect Now. Once you push Connect Now the input lag should be gone.
If you are looking for a clamp I just bought something called Nyko Smart Clip - PlayStation 4 on Amazon for $10. TOTALLY WORTH IT!
Trouble Shooting:
I had an issue when pairing that it would see the device but wouldn't pair. What I had to do was turn off Bluetooth, turn it back on and try again.
Another issue I had was Bluetooth Auto Connect wasn't fixing the lag issue on my Samsung Note Pro (same device I had an issue pairing, my Samsung Note 4 didn't have any of these issues). I had to uninstall sixaxis controller then restart device. Then uninstall Bluetooth Auto Connect and restart device. Then connect DS4 controller. Then install Bluetooth Auto Connect and spammed Connect Now. It seemed to work. FYI my Note Pro is rooted but my Note 4 isn't and this works on both devices!
To repair the controller to your PS4 plug it in with your charging cable and push the PS button, it will pair immediately. I personally bought a 2nd controller so I wouldn't have to do that.
Hello, I tried this with my ps 4 controller and it says that the controller is paired but the light on the controller keeps flashing and it does not respond to any input and after some time it just turns off, the Bluetooth auto connect app just says that is unable to connect to wireless controller, please help, my device is a galaxy s7 edge.
Connecting the PS4 controller works for me but can't do anything else such as can't play games or anything, maybe a future update when everyone starts to cry a bit more about how the S7 Edge isn't compatible with any controller, I have tried 3rd party controllers and the right joystick and the rest of the buttons do not work, the only thing that works is the left joystick...
Before the 7.0 Nougat update on the S7 Edge (SM-G935P) the OTP (wired) connection would crash the phone; freezing the display, hard reboot. This happened on the OFW and rooted versions. Bluetooth would pair but you'd have to try multiple times and you'd need to delete the original pairing to repair (holding the pair buttons on the controller).
After the 7.0 Nougat update, controller support had been added- albeit horribly. The only connection is an OTP connection, Bluetooth still has errors. The button configurations are wrong though, the controller is useless. Square, X and circle are all wrong and triangle doesn't even register.
This is where I'm at, anyone know of any fix? I'm not looking forward to buying a Stratus XL (works perfectly but it's 60$)
I'm about to just switch from Samsung to Sony lol.
Unfortunately the guy that wrote this article is guilty of blatant douchbaggery (what good is a paired controller that cant be mapped and starts mapped completely out of whack). Yes you can 2 button pair a ds4 controller but a ds4 controller is encrypted and requires in linux and linux like os a driver called SCP (SONY CORP.SOMTHING......) That just isnt offered by any app ive seen on droid other than sixaxis. Alternately you could always hard wire it . The major flaw in this is the inability to stop the controller from charging in this case off your phone battery. As far as the mapping goes the only issue is android uses the generic abxy combo which is cross circle square triangle in ps4 speak . in retrospect .....i suppose i should have stopped reading when the author claimed no root. The controller keylayout files (.kl) are located in/system/user/keylayout. How are u supposed to do anything to those w/o root?
Good day,
I have bought a Sony Xperia Z3 tablet for remote play purposes but cannot connect my ds4 controller to it. When i open the remote play app i press register controller and hold the PS button and share to connect the controller. When it starts to blink white it directly changes to a popup saying its pairing as you can see in the screenshot. After that nothing happens and it just stays in that condition. When i press the screen it says pairing unsuccesful please try again.
I can connect the controller directly by bluetooth and the tablet responds to my controller like it should. Though when i start the remote play app and connect to my ps4 it doesn't work and i have to use touchscreen buttons.
Anyone knows this problem and have a solution for it?
Been using the Sixaxis app on my Nvidia Shield tablet to play Gamestream games on my couch. I'm using the DS4 wirelessly over BT. The Shield is connected wired via OTG LAN adapter.
Have a couple of problems that I'm trying to sort out:
1. When I hold down any of the direction pad buttons, the input is taken as multiple fast presses so it's impossible to use in some games like GTA5 where you need to hold down a direction in order to change characters. This "long press" is actually used in quite a few games so it's a big bummer that it doesn't work properly.
2. I set auto-launch in the sixaxis app but when I switch to the console mode it doesn't pair with the DS4 when I turn it in. I have to stop and then re-start the sixaxis to get it to see the DS4.
Would really like to fix at least #1. Any suggestions?
PS: Shield is on Android 5.3.
Would someone who plays with the same setup (DS4 via BT) mind posting screenshot (or description) of their Sixaxis settings?