This zip is a pure stock firmware with no extra stuff added! Only the boot.img is bumped and the modem is hybrid(v30 + v20 to make bump compatible).
Features:
Added from the stock v30 base:
system.img
modem.img - hybrid one(contains v30 + v20 stuff)
boot.img - bumped
rpm.img
tz.img
cust.img
selinux is permissive
How to install:
Wipe system, data, cache, dalvik cache for a clean install.
Flash D850_V30_Bumped.zip
For root:
SuperSU - flash BETA-SuperSU-v2.52.zip.(No SafetyNet pass).
MagiskSU - get it from the official magisk thread.(Passes SafetyNet).
Reboot
Downloads:
v30A [2017-02-09] - Click here to download (MD5: 95ff1dd2e38439e2dea3c46f4a49c3ee)
BETA-SuperSU-v2.52.zip - Click here to download
SharpeningMOD fix - Click here for thread
Mirrors are welcome because this is most probably the first and the last firmware that will come to the D850. It will be good if someone share a picture of about-phone that shows the software info
Modems:
v30A + v20A - Click here to download
v20A - Click here to download
Q&A:
What's different in the hybrid modem?
Check this post - click here
How is this different to other MM stock rom's out there?
This not an extracted system.img rom like others. It contains extracted .kdz files and just flashes them. Permissive selinux is included, alongsite 3 build.prop changes to make for better compatibility(this is an D850PR kdz). Nothing else, no tweaks, no other stuff added.
What does [2017-02-09] mean?
That's build date of the kdz(can be checked in build.prop, kernel build date...)
These are the build.prop changes:
Code:
ro.build.target_country=[B]COM[/B]/ro.build.target_country=[B]US[/B]
telephony.lteOnCdmaDevice=[B]0[/B]/telephony.lteOnCdmaDevice=[B]1[/B]
ro.product.locale=en-[B]GB[/B]/ro.product.locale=en-[B]US[/B]
Thanks man! Great work!
Noob Question: I am on Stock KitKat ROM with KitKat Modem. To upgrade into this, do I also need to flash the hybrid modems as well, then flash this ROM? Or the MM ROM already has the modem on it, and do I just need to flash the ROM?
souler456 said:
Noob Question: I am on Stock KitKat ROM with KitKat Modem. To upgrade into this, do I also need to flash the hybrid modems as well, then flash this ROM? Or the MM ROM already has the modem on it, and do I just need to flash the ROM?
Click to expand...
Click to collapse
The modem is already included in the full zip. I don't think you will have any problem. Most partitions from kdz are already included, so it should work fine. If not you must update to LP but that's only if this doesn't work.
Dear OP,
Please add Theme engine support to Stock Launcher, rest is awesome.
hemal_4404 said:
Dear OP,
Please add Theme engine support to Stock Launcher, rest is awesome.
Click to expand...
Click to collapse
Hello. It's strange because it's there but I guess just disabled. LGHome is the same like other variants. Do you use xposed? With xposed there may be an easy fix but without it need to investigate little more.
I am not using Xposed, and kept rom completely stock.
But Theme engine is not available.
hemal_4404 said:
I am not using Xposed, and kept rom completely stock.
But Theme engine is not available.
Click to expand...
Click to collapse
Hello. Download apk from attachments and replace it in - system/vendor/overlay/com.lge.launcher2 with rw-r-r permissions. Do a backup of the original file just in case. Tell me if this works or not.
MESA said:
Hello. Download apk from attachments and replace it in - system/vendor/overlay/com.lge.launcher2 with rw-r-r permissions. Do a backup of the original file just in case. Tell me if this works or not.
Click to expand...
Click to collapse
I think something is wrong with attached file as it's size is only 160 KB.
hemal_4404 said:
I think something is wrong with attached file as it's size is only 160 KB.
Click to expand...
Click to collapse
No it's not. Try it.
MESA said:
No it's not. Try it.
Click to expand...
Click to collapse
Tried but makes no difference.
MESA said:
Hello. Download apk from attachments and replace it in - system/vendor/overlay/com.lge.launcher2 with rw-r-r permissions. Do a backup of the original file just in case. Tell me if this works or not.
Click to expand...
Click to collapse
You must make changes in etc/permissions...
Ducatuca said:
You must make changes in etc/permissions...
Click to expand...
Click to collapse
Done but no changes.
hemal_4404 said:
Done but no changes.
Click to expand...
Click to collapse
What do you mean? What did you change in etc/permissions?
MESA said:
Hello. Download apk from attachments and replace it in - system/vendor/overlay/com.lge.launcher2 with rw-r-r permissions. Do a backup of the original file just in case. Tell me if this works or not.
Click to expand...
Click to collapse
I followed exactly same as mentioned.
hemal_4404 said:
I followed exactly same as mentioned.
Click to expand...
Click to collapse
Yes, but I wrote to @MESA to make changes in file which is in etc/permissions...
Ducatuca said:
Yes, but I wrote to @MESA to make changes in file which is in etc/permissions...
Click to expand...
Click to collapse
What file are you talking about? If you have any idea about the fix share it here.
[/COLOR]
MESA said:
What file are you talking about? If you have any idea about the fix share it here.
Click to expand...
Click to collapse
Try to download my rom which is the same for d850. And check the permissions folder. U will find the difference in size. I can't remember which exact file is for theme (it can be com.lge.permissions.xml but i'm not 100% sure)...
Ducatuca said:
You must make changes in etc/permissions...
Click to expand...
Click to collapse
Waiting for fix.
Ducatuca said:
[/COLOR]
Try to download my rom which is the same for d850. And check the permissions folder. U will find the difference in size. I can't remember which exact file is for theme (it can be com.lge.permissions.xml but i'm not 100% sure)...
Click to expand...
Click to collapse
All files from that folder are the same.
Do you use d850 system from kdz? Because all apk files are different.
Related
Hi guys!
I want to share this extended power menu.
How to install:
Extract the archive and put the files to system/framework, then reboot the phone. DEODEX IS REQUIRED!
Screenshot: http://img442.imageshack.us/img442/4664/sc20111013135232.png
Files: http://www.4shared.com/file/QwbwVcvF/PowerMenu.html
Tested on my S+ with XXKP4.
---------------------------------------------
I'm not responsible for your device
---------------------------------------------
Thanks to stemline @ 4pda.ru
karo_96 said:
--- wait ---
Click to expand...
Click to collapse
awesome
android69800 said:
awesome
Click to expand...
Click to collapse
Dont worry Edited
hey karo..i have a suggestion......y dont u mix with a theme?
sakindia123 said:
hey karo..i have a suggestion......y dont u mix with a theme?
Click to expand...
Click to collapse
if u r with a custom theme - maybe.
How we can DEODEX sgs+???
I like those extra options. Wondered why there wasn't reboot option allready.
mal13 said:
How we can DEODEX sgs+???
I like those extra options. Wondered why there wasn't reboot option allready.
Click to expand...
Click to collapse
Take a look at this - http://forum.xda-developers.com/showthread.php?t=1266209
there no ned to deodex....just replace ur existing file with this file and delete the .odex file!
sakindia123 said:
there no ned to deodex....just replace ur existing file with this file and delete the .odex file!
Click to expand...
Click to collapse
Hmm, I think without deodex the phone will stuck in bootloop.
edit: which odex file?
karo_96 said:
Hmm, I think without deodex the phone will stuck in bootloop.
edit: which odex file?
Click to expand...
Click to collapse
the associated .odex!
sakindia123 said:
the associated .odex!
Click to expand...
Click to collapse
If you say it's true, maybe
Hey!
Do you know what I have to edit to remove the prompts for "Reboot", "Recovery" and "Download" of the Extended Power Menu that ask if I REALLY want to do the action?
Since the "Power off" action of the original menu doesn't ask for confirmation, I think it'd be more consistent to have these from the extended menu do the same as well!
Thanks
and also could you provide us the informations how to do this extended power menu since i want to keep my icons ^^
How is this done actually? is it through kitchen? but i cant seem to find any power menu option >.<
How to make the extended power menu myself?
it will works with 2.3.6 too? - ROM I9001XXKPS
btw what about to create zip package flashable via CWM?
prescott66 said:
it will works with 2.3.6 too? - ROM I9001XXKPS
btw what about to create zip package flashable via CWM?
Click to expand...
Click to collapse
No need, as replacing framework-res.apk is faster with root explorer
karo_96 said:
Hmm, I think without deodex the phone will stuck in bootloop
Click to expand...
Click to collapse
Yup, in my case with an odexed ROM (without deodexing) it first started to FC when the files were replaced, and then got stuck in bootloop after factory reset.
prescott66 said:
it will works with 2.3.6 too? - ROM I9001XXKPS
Click to expand...
Click to collapse
Above bootloop was caused by XXKPS. After reverting to XXKP4 it was ok again... haven't tested (yet) whether Power Menu works find without deodexing XXKPS, but will try later
Ok... tried everything, but can't get it to work, not even in XXKP. Can someone explain the exact steps to take?
I tried:
1. copying files, deleting the odex versions, restart device -- nothing
2. deleing odex, copying files, restart device -- nothing
3. deodex, copying files, restart device -- nothing
So far power menu will not showup...
(battery indicator did change btw)
Regards,
Nika.
Hi every one!
This is touchwiz 4.5 for Odex and nonOdex(deodex) , 2.3 roms
Perfectly works on both stock and coocked gingerbread rom.
And no need to TitaniumBackup or coping icons and other things,Just flash with cwm!
------------------------------------------------------------------------------------------------
First of all download file from here:
http://db.tt/ZmuLHbfA
------------------------------------------------------------------------------------------------
*HOW TO INSTALL*
°Copy downloaded file to your sdcard
°Reboot into CWM/TWRP
°Choose install zip from sdcard and select downloaded zip file
°Fix premissions
°Go to mount/storage and mount System
°Go to advance/file manager
°Delete file Touchwiz3 from System/app
°Go back to mount/storage and unmount System
°Its better to wipe cache & dalvik cache!
°Reboot System!
------------------------------------------------------------------------------------------------
**At last please tell me bugs if you meet**
**thanks to:
Fr4ggor for the base app
thanks!
I'll include it on next update of my rom.
Could you provide us the changelog from version 21?
I've seen that version now is 22
hiej said:
thanks!
I'll include it on next update of my rom.
Could you provide us the changelog from version 21?
I've seen that version now is 22
Click to expand...
Click to collapse
I will take alook at refrences and report
Does this have the odering bug?
annoymous1234 said:
Does this have the odering bug?
Click to expand...
Click to collapse
No
Isnt tw 4.5 from fr4ggor?
See: http://forum.xda-developers.com/showthread.php?t=1061883
mrjraider said:
Isnt tw 4.5 from fr4ggor?
See: http://forum.xda-developers.com/showthread.php?t=1061883
Click to expand...
Click to collapse
Yes.its version 22;
I just made flashable zip and a little changes!
What are the little changes you made.
I think its against the rules to post something without giving credit. And its easier to install the app via .apk and google play then via a zip.
I have accidentally overwritten the Settings.apk with a modified version which is not compatible with my ROM, so every time I want to go into the settings the SystemUI crashes.
I don't want to flash a new FTF just because of this if it's not neccesary, but I couldn't find a Settings.apk, can someone provide me a copy of the stock one?
Pr3no said:
I have accidentally overwritten the Settings.apk with a modified version which is not compatible with my ROM, so every time I want to go into the settings the SystemUI crashes.
I don't want to flash a new FTF just because of this if it's not neccesary, but I couldn't find a Settings.apk, can someone provide me a copy of the stock one?
Click to expand...
Click to collapse
Extract it from an FTF
1. Use 7-zip (or similar) to unpack the FTF file
2. Follow this guide
3. Grab the settings.apk from the unpacked system.sin
Thanks, but unfortunatelly I ran into some problems.
I'm following the guide that you linked, I've already extracted the system.sin, but there's no "dump data" in flashtool, only dump header, dump raw and extract data, I tried all of them and they don't work with Yaffey.
Pr3no said:
Thanks, but unfortunatelly I ran into some problems.
I'm following the guide that you linked, I've already extracted the system.sin, but there's no "dump data" in flashtool, only dump header, dump raw and extract data, I tried all of them and they don't work with Yaffey.
Click to expand...
Click to collapse
Use this after you 'extract data' in Flashtool under 'sin editor'
Forget about Yaffey
Here you are 15.3.A.1.14 stock settings.
Kosa02 said:
Here you are 15.3.A.1.14 stock settings.
Click to expand...
Click to collapse
Well that's not the Settings
Pr3no said:
I have accidentally overwritten the Settings.apk with a modified version which is not compatible with my ROM, so every time I want to go into the settings the SystemUI crashes.
I don't want to flash a new FTF just because of this if it's not neccesary, but I couldn't find a Settings.apk, can someone provide me a copy of the stock one?
Click to expand...
Click to collapse
I will upload the odex version of Settings or deodexed Settings but tell me your ROM is deodexed or odex
I can't go into the settings but I'm pretty sure I was on 15.3.A.1.14 and odex ROM.
Thank you in advance.
Pr3no said:
I can't go into the settings but I'm pretty sure I was on 15.3.A.1.14 and odex ROM.
Thank you in advance.
Click to expand...
Click to collapse
here it is then...
http://d-h.st/8EN
Thanks, it's working again.
Ben Ling said:
here it is then...
http://d-h.st/8EN
Click to expand...
Click to collapse
I have the same problem.. I be downloaded from provided link and copied to the system/app folder and changed permission to rw r r (both) and reboot
reboot but doesn't work.. Please help me..
FPThatea said:
I have the same problem.. I be downloaded from provided link and copied to the system/app folder and changed permission to rw r r (both) and reboot
reboot but doesn't work.. Please help me..
Click to expand...
Click to collapse
which firmware do you have?
your rom is odexed or deodexed ?
Ben Ling said:
which firmware do you have?
your rom is odexed or deodexed ?
Click to expand...
Click to collapse
Sorry for late reply..
I have flashed it as was so difficult to use..now I'm Clean n Tweak by Sejar...
FPThatea said:
Sorry for late reply..
I have flashed it as was so difficult to use..now I'm Clean n Tweak by Sejar...
Click to expand...
Click to collapse
Flash this zip file as nornal.
I got this problem then i solve by this way
Hi guys,
I just wanted to share you edited caller app from Lollipop leak (N9005XXUGBNL8).
It also works on official FW and even 5.0.1 Note 4 ports.
I didn't like the stock, so I "fixed" in my way .
I hope you like it.
Screenshots:
Changelog:
1. Removed orange/green caller banner.
2. Removed background on "Last spoke" and moved to left.
Download:
v1
https://www.dropbox.com/s/yivnbmenzti0jiq/No_banners_Lollipop_n9005.zip?dl=0
v2 - Delay after call end removed
https://www.dropbox.com/s/ifpitp647i0ct5e/No_banners_no_delay_Lollipop_n9005.zip?dl=0
Install:
Put the zip in CWM/TWRP and flash it.
Warning! It's only for DeODEXed ROMs!
Enjoy!
thank you very mach , work very fin
thankz a lot ..... flashed it one echor rod ... worked fine ... bt
is official n9005 (N9005XXUGBOA5) is odex or deodex ...
can i flash this of stock...??
All official ROMs flashed via ODIN are Odex.
Most custom ROMs are deodex.
masterross said:
Hi guys,
I just wanted to share you edited caller app from Lollipop leak (N9005XXUGBNL8).
It also works on official FW and even 5.0.1 Note 4 ports.
I didn't like the stock, so I "fixed" in my way .
I hope you like it.
Screenshots:
Changelog:
1. Removed orange/green caller banner.
2. Removed background on "Last spoke" and moved to left.
Download:
https://www.dropbox.com/s/yivnbmenzti0jiq/No_banners_Lollipop_n9005.zip?dl=0
Install:
Put the zip in CWM/TWRP and flash it.
Warning! It's only for DeODEXed ROMs!
Enjoy!
Click to expand...
Click to collapse
Please provide for Official Stock Lollipop firmware.. :fingers-crossed:
TheTAMAS said:
Please provide for Official Stock Lollipop firmware.. :fingers-crossed:
Click to expand...
Click to collapse
Hi,
You can use it on official deodexed ROMs.
If you mean official Odex then probably you can use it too but need to remove odex file and ARM folder (if exist).
masterross said:
Hi,
You can use it on official deodexed ROMs.
If you mean official Odex then probably you can use it too but need to remove odex file and ARM folder (if exist).
Click to expand...
Click to collapse
I confirm it works on odex rom too.. :victory:
Official one for sure.. No need to delete any odex file or arm folder-there aren't any to delete..
:highfive:
Please, can you revert back the background color of last talked info because as you can see in the attachment-user picture makes it hard to read the text without the background image..
Also, if possible, please replace the dial pad 'water drop' should with the file in the attached zip-it'll be SOOOOOOOOO great of you..
I hope you understood my request.. :fingers-crossed:
Hi,
Here is the modded apk.
https://www.dropbox.com/s/kcogmix32evozui/No_banners_Lollipop_n9005_TheTAMAS.zip?dl=0
I use only dark background pics so thats I made it white transparent.
About dial tone you need to change touch_ripple.ogg from SecContacts_Phone_OSup.apk
You can do it simple with Zip or Rar. No need to decompile (I think).
masterross said:
Hi,
Here is the modded apk.
https://www.dropbox.com/s/kcogmix32evozui/No_banners_Lollipop_n9005_TheTAMAS.zip?dl=0
I use only dark background pics so thats I made it white transparent.
About dial tone you need to change touch_ripple.ogg from SecContacts_Phone_OSup.apk
You can do it simple with Zip or Rar. No need to decompile (I think).
Click to expand...
Click to collapse
For some strange reason-this file isn't working..
I tried deleting, over-writing, cut-paste, wipe Dalvik cache, everything that I could think of.. Other person receives call but I don't get to see anything going on, on my end.. Used Flight Mode toggle to disconnect the call..
And I didn't get the 2nd parta your reply 'zip or rar'..
TheTAMAS said:
For some strange reason-this file isn't working..
I tried deleting, over-writing, cut-paste, wipe Dalvik cache, everything that I could think of.. Other person receives call but I don't get to see anything going on, on my end.. Used Flight Mode toggle to disconnect the call..
And I didn't get the 2nd parta your reply 'zip or rar'..
Click to expand...
Click to collapse
Hm.
Try this one:
https://www.dropbox.com/s/gn88vmti65jzrim/No_banners_Lollipop_n9005_org_last_spoke.zip?dl=0
For changing touch sound you need to go to:
/system/priv-app/SecContacts_Phone_OSup/SecContacts_Phone_OSup.apk
transfer to PC open with winrar and change the touch_ripple.ogg with yours.
masterross said:
Hm.
Try this one:
https://www.dropbox.com/s/gn88vmti65jzrim/No_banners_Lollipop_n9005_org_last_spoke.zip?dl=0
For changing touch sound you need to go to:
/system/priv-app/SecContacts_Phone_OSup/SecContacts_Phone_OSup.apk
transfer to PC open with winrar and change the touch_ripple.ogg with yours.
Click to expand...
Click to collapse
:highfive:
It's working now.. w0.ot :victory:
But the latter part regarding rar/zip didn't.. It force crashes the Contacts app
Please check the attachments
The zip contains the modified apk and the related ogg file
Fyki, I don't know how true it is-I read on XDA long time ago that the sound files are present in the phone apk and not the contacts apk
I tried changing the files at that time too-it gave force crash too.. :laugh:
The reason why I'm still hopeful is because I reckon that zip/rar may not be the right way to do so.. :fingers-crossed:
@TheTAMAS
Try this:
https://www.dropbox.com/s/cxg7aka1cwlti0n/touch_sound.zip?dl=0
It's DeOdexed.
If you have problems remove the Odex file and ARM
masterross said:
@TheTAMAS
Try this:
https://www.dropbox.com/s/cxg7aka1cwlti0n/touch_sound.zip?dl=0
It's DeOdexed.
If you have problems remove the Odex file and ARM
Click to expand...
Click to collapse
There's no related odex file or arm folder but the icon isn't showing up (maybe it has something to do with compression type like best, store, normal)
Please check the attachment..
The app won't even appear forget force crash or running..
What ROM do you run?
Also please check the permissions on the apk.
Sometime it's not set correctly, that's why icon is missing.
Regards
masterross said:
What ROM do you run?
Also please check the permissions on the apk.
Sometime it's not set correctly, that's why icon is missing.
Regards
Click to expand...
Click to collapse
I'm running stock Lollipop Samsung Galaxy Note 3 official firmware..
Check the snapshot in my previous post-the permissions are visible in it..
There is some problems with recompiling this apk. Sorry.
Sent from my SM-N910F using Tapatalk
masterross said:
There is some problems with recompiling this apk. Sorry.
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Thanks anyways.. :highfive:
Just a question, what is the method for reverting back to Echoe Rom v23 default dialer with full image? I have yours now which I really prefer, but I would like to toggle back just to compare the difference. Than you.
Just extract LegacyInCallUI.apk from your ROM's zip and replace in phone with correct permissions.
masterross said:
Just extract LegacyInCallUI.apk from your ROM's zip and replace in phone with correct permissions.
Click to expand...
Click to collapse
Thank you man.. Yours is by far the better option. I can't see how anyone can use the convoluted stock dialer.
Hello! I'm working on making a debloated ROM for the samsung galaxy j7 (j700p) model. I have these files: https://gyazo.com/24b7abcb91a62cfaa0e8fd80ca6731be
I can still always create a new system image.
I was wondering, how would one include things like Xposed and SuperSU as system apps? Here's a picture of the system. https://gyazo.com/341a4bd5ebc0d4fd49a0368520a9df4c
With Xposed, I'm not sure how to put in META-INF. Everything else is in. Not sure what to do with that folder.
I'm not sure where to get the app folder. I was going to put it in the app directory.
How do I get the image pre-rooted? I'm not too sure on that either.
Finally, what files do I need to create the final ROM? I have those files, but I'm not sure if I'm supposed to have anything else or something.
Thanks for the help in advance!
minz1 said:
Hello! I'm working on making a debloated ROM for the samsung galaxy j7 (j700p) model. I have these files: https://gyazo.com/24b7abcb91a62cfaa0e8fd80ca6731be
I can still always create a new system image.
I was wondering, how would one include things like Xposed and SuperSU as system apps? Here's a picture of the system. https://gyazo.com/341a4bd5ebc0d4fd49a0368520a9df4c
With Xposed, I'm not sure how to put in META-INF. Everything else is in. Not sure what to do with that folder.
I'm not sure where to get the app folder. I was going to put it in the app directory.
How do I get the image pre-rooted? I'm not too sure on that either.
Finally, what files do I need to create the final ROM? I have those files, but I'm not sure if I'm supposed to have anything else or something.
Thanks for the help in advance!
Click to expand...
Click to collapse
Use superr kitchen it can do all this
messi2050 said:
Use superr kitchen it can do all this
Click to expand...
Click to collapse
What files does super kitchen need to make a rom?
minz1 said:
What files does super kitchen need to make a rom?
Click to expand...
Click to collapse
stock samsung rom
messi2050 said:
Use superr kitchen it can do all this
Click to expand...
Click to collapse
Pm me for ROM advice
messi2050 said:
stock samsung rom
Click to expand...
Click to collapse
Hey I'm getting some error with not having permission with a system .sh file. Any help?