Hi,
long story short I rooted my new Glaxy S7 and disabled OEM unlock. Now i cant boot anymore.
Is there anything i can do to fix my phone or did i just burn 700€?
just open kyes samsung, and go to firmware in tab options , then write your serial number and done. easy
I rooted my tab e SM-T377T via this post https://forum.xda-developers.com/general/help/root-galaxy-tab-e-model-sm-t377t-t3444670. But cannot get past the frp lock to reboot my device and I cannot find any way to reset the device. Please help.
snake5564 said:
I rooted my tab e SM-T377T via this post https://forum.xda-developers.com/general/help/root-galaxy-tab-e-model-sm-t377t-t3444670. But cannot get past the frp lock to reboot my device and I cannot find any way to reset the device. Please help.
Click to expand...
Click to collapse
Are you able to boot it into download/Odin mode by holding down volume, power and home buttons? You could just restore it to stock if so and root it again. I didn't encounter this frp lock when I rooted mine.
In Developer Options, make sure you turn on OEM Unlock. If you disable after rooting you'll get the FRP Lock error and no boot through. Re-Apply the Stock ROM and you can then enable OEM Unlock and re-root. Do not disable after re-rooting or you will be right back to the same problem.
The problem with FRP in new devices with the newest stock version is that it just won't let you pass the setup wizard. I've tried many methods to root, bypass FRP or even install a custom recovery, all failed
Mister_E105 said:
In Developer Options, make sure you turn on OEM Unlock. If you disable after rooting you'll get the FRP Lock error and no boot through. Re-Apply the Stock ROM and you can then enable OEM Unlock and re-root. Do not disable after re-rooting or you will be right back to the same problem.
Click to expand...
Click to collapse
How about a device that's never been past the setup wizard? I just can't get past it, and it won't let me install any custom recoveries or root.
You still need to get through the initial setup to enable developer options, then enable OEM unlock and then you can root.
USE Z3X Select Model: T817T
Operation: Reset FRP/React/EE
Selected model: SM-T817T
Software version: 29.1
Searching Samsung USB Flash interface... COM8 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.29.1
Does this work for a galaxy tab e SM-T377P
midnitekrawle said:
Does this work for a galaxy tab e SM-T377P
Click to expand...
Click to collapse
yes
secureflash said:
USE Z3X Select Model: T817T
Operation: Reset FRP/React/EE
Selected model: SM-T817T
Software version: 29.1
Searching Samsung USB Flash interface... COM8 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.29.1
Click to expand...
Click to collapse
Would be very nice if we all had that box buddy. Some of us are poor and doing this to not be. Thanks for the help though I do wish I had one of these, but at least now I know they are worth the money
NecCopimpin said:
Would be very nice if we all had that box buddy. Some of us are poor and doing this to not be. Thanks for the help though I do wish I had one of these, but at least now I know they are worth the money
Click to expand...
Click to collapse
the tablet itself is not cheap either
*Failed for my T377V Any suggestions please?*
Operation: Reset FRP/React/EE
Selected model: SM-T817T
Software version: 28.2
Searching Samsung USB Flash Interface... detected COM4
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... error
Done with Samsung Tool PRO v.28.2
thanks! i've just came to remove frp on my sm-t377A android 6.0.1 using your explanation. many thanks
Searching Samsung USB Flash interface... COM14 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.34.3
Hi, I have a Samsung Galaxy S6 that I want to root and I need to unlock the OEM but when I go in the devlopper options the button is not appearing.
Domidom77 said:
Hi, I have a Samsung Galaxy S6 that I want to root and I need to unlock the OEM but when I go in the devlopper options the button is not appearing.
Click to expand...
Click to collapse
I have the same problem. ... There is who can help
Hey friends,
I just flash my samsung j700f with the MDK 5.1 custom rom without rooting my device after flashing., the device runs normally and very smoothly. But unfortunately I disabled OEM unlock in my devloper option thereafter when i restart my phone then it's shows "custom binary blocked by frp lock" I cant turn on my phone and enable OEM unlock???
Please help me to start my phone like before
Please some body help me???
Priyankaaaa said:
Hey friends,
I just flash my samsung j700f with the MDK 5.1 custom rom without rooting my device after flashing., the device runs normally and very smoothly. But unfortunately I disabled OEM unlock in my devloper option thereafter when i restart my phone then it's shows "custom binary blocked by frp lock" I cant turn on my phone and enable OEM unlock
Click to expand...
Click to collapse
This is my first time rooting a phone. I aam using samsung galaxy m30 SM-M307F (INDIA INS) so these are a following steps that I did -
1. Went to about phone > Software information > Tapped on build no 7 times
2. Enabled oem unlocking and usb debugging.
3. Turned off my phone.
4. Pressed the volume up and volume down button. I also connected my phone with a usb cable that was connected to pc so that I can enter into download mode.
5. Long pressed volume up key to unlock bootloader and then pressed volume up key one time to unlock the bootloader which rebooted my pc and wiped my data.
6. After reboot when I go to settings I can no longer see developers options, no oem unlocking options etc etc.
I entered into download mode again which was telling me to lock my bootloader again which meant that I was sucessfull in unlocking the boot loader ig ? But it was saying that -
KG STATE: Checking
OEM MODE:OFF(U)
I don't remeber what was written there exactly but it was something along these lines. Can some one help me? It is my first time rooting a device and I am very confused whats going on. I asked some people and they said that I have to bypass the rmm state protection if I want to get oem unlocking option back and I want to flash firmware files. Any help will be greatly appreciated.
EDIT: I don't have samsung galaxy m30 phone with me rn so I cannot send the ss at this moment but if you need the ss I will send it to u soon.
Look inside here:
Fix Prenormal RMM State Lock Error on Samsung Galaxy Devices | iHax
Here's how to fix the annoying "Prenormal RMM State Lock" error on Samsung Galaxy devices.
ihax.io
jwoegerbauer said:
Look inside here:
Fix Prenormal RMM State Lock Error on Samsung Galaxy Devices | iHax
Here's how to fix the annoying "Prenormal RMM State Lock" error on Samsung Galaxy devices.
ihax.io
Click to expand...
Click to collapse
Oh ok I got it but how will I install TWRP on my samsung galaxy M30 ? Is there a guide for it ? Can u give me the link to the guide.
EDIT: I have another question. After installing TWRP and bypassing rmm state lock in my phone I can root my phone in 2 ways ? -
1. By Using TWRP.
2. Going into download mode and flashing the AP,BL,CP,CSC with the help of odin ?
Sorry for the dumb question.