I am using the steering wheel controls on my intel based Joying unit. I have a Vol+, Vol-, and Mute button on my steering wheel. These are working well, but it would be GREAT if I could program it to change track if I hold the button down for a few seconds. I remember this being an option on the hardware keys on my Android phone, and was hoping we could set that up on our car stereos.
Any thing out there that'll do that?
Is your HU a Joying MCTD?
If yes, you can set different actions for "short press" and "long press" of all swc buttons
Thanks for the response! My HU is a Joying but it's the new Intel unit with Android 5, so I think it's a bit different. I don't see any option for short or long press on the "Steering" app that sets up the buttons.
You read my mind, I was asking myself this question!
I wonder if there's any similar on the intel joying units
KamaL said:
You read my mind, I was asking myself this question!
I wonder if there's any similar on the intel joying units
Click to expand...
Click to collapse
Mine is not Joying but has many similarities with Joying and its using Intel Sofia processor.
Like mention previously, In factory setting there is a setting for press & long press button.
Even though its for on screen button, I think it worth to try for steering wheel control.
FYI, password for factory setting menu for my unit is "m123456".
Hello all,
So I purchased a buttonless PX5:
https://www.aliexpress.com/item/And...32849648099.html?spm=a2g0s.9042311.0.0.qvQ36y
However, none of the Android widgets or volume buttons work to control the volume.
Only the little button off to the top right corner does anything.
I feel like I'm going to crash my car, constantly hunting for that thing.
Is there anyway to patch/hack this thing to respond to something like a virtual volume slider like this?
https://play.google.com/store/apps/details?id=com.clownface.volumeslider
Thanks!
Why do you need onscreen volume? Didnt you have a CAN and steering wheel controls? The volume control on HU is not the same as on smartphones. It has controlled by MCU board where android board sends special commands from the headunit service.
My car came with a sport package, which meant smaller diameter steering wheel and therefore no wheel controls
That being said, the sound slider via settings menu is indeed able to control the volume via onscreen controls. It just doesn't seem to respond to the normal android media controls, is there a way to link the two together?
Then the simplest way is to use infrared remote control (if your HU has it) or to buy universal resistive SWC and connect it to Key-wires.
xtracrispy said:
That being said, the sound slider via settings menu is indeed able to control the volume via onscreen controls. It just doesn't seem to respond to the normal android media controls, is there a way to link the two together?
Click to expand...
Click to collapse
The only way is to create your own service or automation that will send volume control broadcast intents to mcu.
For my MTCB it may be even a shell commands:
Code:
am broadcast -a com.microntek.irkeyDown --ei keyCode XX
where XX - 19 (volume up) or 27 (volume down).
You need to find this commands for your MTCE here and you will be able to use Tasker for your own service creation.
The second way is to write service on java. But you need a skill for that.
Found xposed-mtce-utils do the job. It has "a strip of volume control at the bottom of the screen".
https://forum.xda-developers.com/showpost.php?p=72103289&postcount=2
aluver said:
Found xposed-mtce-utils do the job. It has "a strip of volume control at the bottom of the screen".
https://forum.xda-developers.com/showpost.php?p=72103289&postcount=2
Click to expand...
Click to collapse
Thanks for the link! I'll definitely give this a shot.
Do you have any experience entering recovery mode on a deck that has absolutely no buttons?
xtracrispy said:
Thanks for the link! I'll definitely give this a shot.
Do you have any experience entering recovery mode on a deck that has absolutely no buttons?
Click to expand...
Click to collapse
Don't have a MTC unit but try this,
Install Terminal Emulator app, enter "reboot recovery"
pretty big fails on the trying front.
I've managed to buy a MTCE deck that has neither buttons or SD card slot with which to install malaysk rom the prescribed way.
Has anyone had luck with a pure download -> flash approach? If so, any instructions online?
xtracrispy said:
Has anyone had luck with a pure download -> flash approach? If so, any instructions online?
Click to expand...
Click to collapse
I believe it must update from usb-flash drive.
Volume up/down codes for your MTCE: 273 and 281.
You can now use Tasker to draw your own Up/Down arrows and set the shell commands for them (w/root).
Or you can use any usb keyboard or other usb-hid device and set the volume commands for buttons you wish.
Other key codes here https://forum.xda-developers.com/an...tcd-5-1-1-xposed-compatibility-t3380468/page2
Volume control workaround on buttonless HU
Hi this should help you which I posted on Car Launcher thread.
Seems we have the same HU except mine was sold by XTRONS.
Like many of you on this forum, I love the simple efficient GUI of Car Launcher AG, amazing work from the developer ! yet I have come to the frustration of volume control on bare HU like mine : PE88CMPL from XTRONS which has absolutely zero buttons at all.
So I went on eBay and bought "Car steering wheel remote control buttons wireless android gps navigation", connected it to Key 1/Key 2, Ground and acc 12V.
Programmed the buttons to volume up down mute and other useful functions such as back/home/gps/answer call/hang up and shutdown.
These setups are in the Car Steering Wheel area in settings.
Those buttons are super small and come with a 3M double face on the back and can be properly installed on the console at arm/finger reach.
I saws that JOYING sells a larger one that fits in cups holder "JOYING SWC Steering Wheel Controller for Android Universal Car GPS Stereo Radio" if you prefer that design.
Enjoy
Hello, i now that issue isn't from this thread but i need some help for use an usb knob that dont make nothing on a MCU of Spreadtrum SC9853I.
This multimedia knob change only the sound level of notifications. It's possible to make it work on MCU.
Thanks
PaulBorges said:
Hello, i now that issue isn't from this thread but i need some help for use an usb knob that dont make nothing on a MCU of Spreadtrum SC9853I.
This multimedia knob change only the sound level of notifications. It's possible to make it work on MCU.
Thanks
Click to expand...
Click to collapse
you're in the wrong forum, suggest searching for "SC9853I" and ask the question of the knowledgeable joying people.
Hi. Sorry for my google english.
I have -Px6 DSP 9 " MTEC_CHS buttonless with Android Pie- and I couldn't find (if any) a "Knobby volume control style" apk for volume control. I can't put a link from Google Play.
The idea is to touch the screen with 3 fingers (anywhere on the screen) and rotate your wrist to bring up the volume control and increase or decrease the volume. Like a home amp. Do you know of any MTCE that has it since I suppose it should be integrated into the MCU or some apk ?.
Thank you all
Hi all,
After reading and searching on the forums I cannot find a solution for my problem.
I have a MTCE MX unit from ZNY with two phisical rotary knobs:
https://nl.aliexpress.com/item/32864796232.html
The left one is for volume, this is ok and works well.
But the right one only ajusts radio frequency, it has no other function.
In the factory menu I can remap all buttons and the button press of the rotary knobs, but I see no possibility for remapping the rotary function.
Has anyone an idea how to use this knob to skip through playlists or whathever else is possible to remap this knob.
Hi there.
I'm also interested in assigning a different function to the right knob. Have you found any ways to do that?
Does anyone know how many buttons can be mapped on the TEyes SPro (or even CC2)?
I have a Kia Sorento 2012. It has the following 9 buttons, 11 if you include the 2 long presses:
Mode (i.e. Source)
Vol+ and Vol-
Next (Long press Fast Forward) and Previous (Long press Rewind)
Call Answer and Call Hangup
Mute and Voice Assist
I can do without the long press FFWD and REW, which I don't think I've ever used. When I try to map them, it seems as though only 5 buttons are mapped. If I try another, the last one is replaced.
I'm using a December firmware image with no Canbus and only using Key1 and Key2. I don't know if later images map more than 5. I try to communicate with TEyes through AliExpress messaging but they don't respond...don't know why.
Any assistance is appreciated.
Hi mate i had same issue, and i manage to fix it.
But we don't have same car, is that spro with newer update from cc2 or?
anyway how to fix it:
You need to install older original Steering control.apk, I manage to extract from older firmware and installed it in newer one. And it works like charm with older program.
Hello!
I have a PX6 MTCE with a DSP that broke down. I finally got a new motherboard from the chinese seller and moved everything over to the new hardware. The new motherboard differs from the original one. The biggest difference is that they didn't send me one with a DSP.
The new setup is working. I had to remap the hardware buttons for NAV, BAND etc but found that easy to do in the settings. My only problem now is the left rotary encoder. It is working as "skipping" at the moment, i.e changing position in my song or podcast. The right knob works for volume. I want to have the left knob for volume and pressing the knob for power on/off.
How can I remap this?
My unit is rooted
Best regards,
/David
duelago said:
Hello!
I have a PX6 MTCE with a DSP that broke down. I finally got a new motherboard from the chinese seller and moved everything over to the new hardware. The new motherboard differs from the original one. The biggest difference is that they didn't send me one with a DSP.
The new setup is working. I had to remap the hardware buttons for NAV, BAND etc but found that easy to do in the settings. My only problem now is the left rotary encoder. It is working as "skipping" at the moment, i.e changing position in my song or podcast. The right knob works for volume. I want to have the left knob for volume and pressing the knob for power on/off.
How can I remap this?
My unit is rooted
Best regards,
/David
Click to expand...
Click to collapse
Almost solved it myself. The solution was to install MTCD_Tools. With this app, I was able to figure out that I had to remap key code 299->281 and 300->273 With this info I found a way to remap in the settings of the Hal9k Mod firmware.
I still don't know how to remap long press on the volume knob to power on/off. I have the code for power on/off, but I don't know the current code for long press. I.e. Nothing shows up in MTCD_tools when I press the button at the moment.