An hour or so ago everything worked fine, and then I updated my playstores pending apps (only Fleksy was pending) and the "force touch" feature of the phones seems to have completely stopped working, no matter what setting I turned on or off it didn't work...
Anyone has a clue as to what can cause this?
General notes:
1. Using stock Exynos unlocked variant
2. I am using package disabler (which btw didn't improve much my battery life, but that might be just me using the phone too much ) so maybe one of the packages decided that it depends on a disabled one?
I noticed mine stops working after a reboot and takes about a minute or two to get back up and running. Try a restart after clearing caches, if nothing still, reboot in safe mode. If it works, then its an app you installed interfering.
RazoE said:
I noticed mine stops working after a reboot and takes about a minute or two to get back up and running. Try a restart after clearing caches, if nothing still, reboot in safe mode. If it works, then its an app you installed interfering.
Click to expand...
Click to collapse
Mine also stop working after I restart my S8 Plus, it will again work if I wait around 20 minutes. Is this software or hardware problem? Any solutions?
Wish mine would stop working permanently! can't stand that feature forever brushing across it and waking the phone up!
Ady1976 said:
Wish mine would stop working permanently! can't stand that feature forever brushing across it and waking the phone up!
Click to expand...
Click to collapse
How does it act up on your part? Mine would just stop working if I restart the phone & I should wait sometimes hours before it would work again.
Every time i'm installing my phone in my car mount I need to hold the phone from the bottom to install it correctly and brushing my fingers across the bottom is constantly waking the phone up, I've lowered the sensitivity to it's minimum.
Ady1976 said:
Every time i'm installing my phone in my car mount I need to hold the phone from the bottom to install it correctly and brushing my fingers across the bottom is constantly waking the phone up, I've lowered the sensitivity to it's minimum.
Click to expand...
Click to collapse
I see, problem is not the same. On my part the tactile home button simply doesn't work when you press on it. I have to double tap to wake the phone when on lockscreen.
bladefrost said:
I see, problem is not the same. On my part the tactile home button simply doesn't work when you press on it. I have to double tap to wake the phone when on lockscreen.
Click to expand...
Click to collapse
Unless your phone is unlocked no pins etc the phone will just go to the lockscreen, it's a useless feature, most people have the phones locked and thus it's a complete waste of time, it sounds to me the capacitive home button part of the screen was an afterthought because they couldn't install the fingerprint reader under the screen, just had a software update yesterday and still can't turn it off, basic stuff Samsung should enable an ON/OFF toggle switch for this.
Had the same problem with my S8 Plus India Variant(SM-G955 FD), I got my screen replaced from service center, Device was not rooted back then, so was under warranty.
But it is an hardware issue, as since then it has never gone off.
I mean when I press the home button hard it doesn't wake the phone up & no vibration. It happens when I restart the device then it would stop working for few minutes to a few hours sometimes, then it would start working again normally until I restart the phone again. I think this is just a software issue.
Related
I just started having this "bug" yesterday. Basically, what happens (randomly) is that when I press the power button, remove the stylus, or slide the phone open to wake it up I'll be met with a black/blank screen. The backlighting will be on, and the phone is responsive (can receive messages, make calls, sounds/notifications work), but I won't be able to use the screen. If I use the power button to turn the screen back off and wait a few seconds, the screen might start working again. This is completely random and I cannot duplicate it with any guaranteed process, but it seems to be when the phone is waking up from standby. After a soft reset, probably half of the time I'll be met with this same delima, which leads me to believe it's hardware and not completely software.
At the same time the phone is also struggling to re-paint the screen from the change of Landscape-to-Portrait and visa versa. Also opening and closing windows to get back to the today screen also cause a problem. I've disabled TF3D to see if that makes a difference, it doesn't. I have a blank today screen with no plugins to free up the system resources, and am still having this issue.
I'm using JD's Rom (probably around 1.3, it's been running fine with no issues up to this point).
I'm also using S2U2 1.35 (if that makes any difference, haven't had any problems until recently)
The phone has never been dropped, it's in InvisibleShield, and normally sits on my desk charging all day.
This started happening last night for no apparent reason and it's really starting to irratate me.
Any advice is appreciated. Thanks.
Re the black screen:
Sounds like its software related. For example, I sometimes have this if I leave PocketTwit in the foreground and turn off phone. What software did you install yesterday? Also, do you try to press the home key and see if that clears the screen?
After more testing..
After some more fiddling around with the phone I'm about 90% certain it's a hardware issue. I noticed that when I slide the keyboard out if the slide portion is past the number line then the screen will stay on, but not update. I don't know how well I can explain it. If I'm typing and hold the screen to keep it from opening all the way then I can see the letters/words appear (in txt msg/email), but if I let the screen goes and it slides all the way open then the screen will stay on and only show what has already happened, any more typed characters will not appear, but if I move the screen back to the number row then the screen will re-draw and update what has happened.
Is this something that Sprint should fix no questions asked?
lulugirl896 said:
Re the black screen:
Sounds like its software related. For example, I sometimes have this if I leave PocketTwit in the foreground and turn off phone. What software did you install yesterday? Also, do you try to press the home key and see if that clears the screen?
Click to expand...
Click to collapse
The last piece of software I installed was Gyrator 2 on Friday-ish. Thinking that it was the problem, I removed it using MemMaid. I'm going to give the phone a flash tonight and see if it is software related (hoping for the easy fix) but as the post above says, I'm almost certain it's a hardware issue. I just wish I knew how it happened. . . So much for that time putting those InvShld on.
Final Update (this can be closed)
I took it into a Sprint store and they replaced the "flip" on the top for free (I have insurance).
Point of the story/thread, this can be closed, it was a hardware issue, and now it's fixed.
My TF has done this three times now since yesterday's FOTA. The device hasn't crashed as I can still use ADB and the notification bar relects the true battery status, time etc. I can also turn the screen on and off with the power button but I can't unlock it due to the screen not accepting touch input.
This happens regardless if use a custom rom or not.
Has anyone else had this experience?
Roach2010 said:
My TF has done this three times now since yesterday's FOTA. The device hasn't crashed as I can still use ADB and the notification bar relects the true battery status, time etc. I can also turn the screen on and off with the power button but I can't unlock it due to the screen not accepting touch input.
This happens regardless if use a custom rom or not.
Has anyone else had this experience?
Click to expand...
Click to collapse
My device had this issue, but with the 3/25(?) firmware (it came from overseas -- Taiwan). I basically thought I had a brick, but yesterday I used not-quite-pristine US system.img via a nandroid backup, and it brought it back to life. Still working, 18 hours later (and with the latest OTA update).
If you still have cwm / nandroid access, PM me and I'll post up the system.img that I used to fix my issue, yesterday. It was basically an image I found on Android Central, and I yaff2'd it and added my own md5sum so that nandroid could recognize it. My ongoing concern is that the permissions could be all screwy and softlinks could be broken. But, given the choice of that versus a bricked tablet, I could live with broken softlinks.
mine has done it 3 time while playing fruit ninja but only while playing that and not whit normal use as browsing and all that
Fisken said:
mine has done it 3 time while playing fruit ninja but only while playing that and not whit normal use as browsing and all that
Click to expand...
Click to collapse
Same here. Touchscreen stopped responding while playing that game, but that happened even before the OTA.
How can you get it to start responding again or force a reboot? I just got mine in the mail, pushed the lock button, and now it won't respond to any of my touches. Stuck at the lock screen.
jonnyktyler said:
How can you get it to start responding again or force a reboot? I just got mine in the mail, pushed the lock button, and now it won't respond to any of my touches. Stuck at the lock screen.
Click to expand...
Click to collapse
Hold the power button for 10-12 seconds to force power it off. Release button. Wait a couple seconds. Power on as normal (a 5-6 second hold down of the power button). If still no joy... you're screwed perhaps.
ok thanks a lot holding the power button down for a long time did force it to turn off, now it's working again.
Hey guys,
strange and frustrating problem. I was using my phone pretty extensively today (although nothing crazy), mostly thanks to Pokemon Go. Tonight after using my phone normally, I went to press the power button to turn the screen off and nothing happened. I was able to reboot (by changing one of the long-press actions to bring up the power menu via GravityBox) and then was unable to power on the phone. It seems like my hardware power button has suddenly become unresponsive. This leaves me unable to power on/off the phone, including booting into the bootloader. Also, I seem to be unable to wake my phone up by double tapping the screen or swiping up.
The phone otherwise functions fine. If I get a notification, the screen wakes up and I can use the phone. Otherwise, the only way I've been able to get into the phone is by connecting it to a computer and issuing ADB commands. The IR blaster functions fine which makes me think it's not the hardware button?
Has this happened to anyone else before? Can the power button just break like that without any water / physical damage? The fact that I also can't wake the screen makes me think it's a software issue. One other thing I suspect is that my phone abruptly died yesterday (battery died despite software thinking it still had juice left). In the past, with the modified kernel / rom, this has resulted in some nasty issues, including 4G not working and the Android system process basically exploding. I thought I lucked out when I powered it on after that, but maybe it just took a day for this issue to manifest itself.
I'm going to make a NANDROID backup and try flashing a few different things to see if I can fix it. I'll post my progress here.
Current build:
- Verizon M8, S-OFF
- TWRP
- Android GPE 6.0 (MRA58K.H13)
Edit: I haven't been able to find a fix. I'm a bit afraid to try a full RUU since I can't use the hardware keys to reboot into the bootloader should something go wrong. It may just be that my PWR hardware button is f'd which really sucks. I'm not sure I'm up to cracking open the phone to fix it. In the meantime I downloaded an app called Gravity Screen On/Off which uses the phone's proximity sensor to wake the screen up and it seems to work ok for now.
Now this doesn't happen all the time every time, but usually around a notification and the screen is off, I go to hit a button to turn on the phone and it doesn't respond but the touch-keys are backlit. If Always-on Display is on, the screen is black regardless, not even showing the time or notifications. The only fix is waiting ~10 seconds for the phone to respond, which in some cases can be the difference between a missed call.
Now, seeing Always On Display off like that while it should be on made me think back to when I saw some sort of Nougat optimization setting that allowed me to select Always On Display, and as far as I remember, I did. That makes me think this process is killing AoD and it is taking that long to start back up, where the phone won't unlock until AoD (is back on and) can confirm that it's trying to wake up out of that state.
However, I don't believe this is the issue. I have turned off AoD and the issue still happened directly afterward, after a Messenger notification. This is stock firmware, however it is not factory firmware. I believe I downloaded it from Sam-Mobile, and they had the 7.0 Nougat upgrade that I would have gotten OTA with the factory firmware anyway.
Somehow I don't think it's the flashed firmware that is the problem, however please let me know if that's a possibility.
While the phone (or whatever) is hanging, I can still hold down the power button and I will feel haptic feedback as if the power menu has opened, and when the phone responds the power menu will be open, so the phone does still receive input. It just doesn't seem to act upon it or wake the screen properly. Is this perhaps merely a known Nougat bug or is it a glitch with my flashed stock firmware?
I'm sorry I don't have much more information. I do have Greenify, but I don't think that can or is set to disrupt anything that would affect the phone waking, or that would hang the OS, homescreen or whatever it is.
I haven't done other troubleshooting because I don't know what direction to attack this from, and that is why I have come here.
Help please!
Thanks in advance. :good:
UPDATE: It seems to happen directly after my screen shuts off from being on. So, if a notification wakes my phone but I don't interact with it in time and the screen goes off, when I press the power button it won't respond for ~10-15s. That's all I've really noticed... Anyone else have this problem??
BUMP.
Also, the same thing happens if I press the power button on my phone (by accident) and then go to turn it back on almost immediately - it won't respond for a while.
Cleared cache from recovery?
Got any settings enabled like "Keep screen off" which stops the screen coming on in your pocket, try disabling it in case that's causing it
Different gestures, disable them all in case they're messing with it
Last resort, factory reset
*Detection* said:
Cleared cache from recovery?
Got any settings enabled like "Keep screen off" which stops the screen coming on in your pocket, try disabling it in case that's causing it
Different gestures, disable them all in case they're messing with it
Last resort, factory reset
Click to expand...
Click to collapse
Won't be factory resetting unless I plan to root or something. I'll fiddle with the keep screen off setting that I do have on, and I highly doubt gestures would affect it but regardless I haven't enabled or used any. Thanks for the reply.
So the "Keep screen off" setting didn't affect anything. I turned Always On Display back on and I see the same issues. However, now sometimes I notice when I lock my screen or it shuts off, sometimes the AOD will appear and then quickly disappear, and stay in this hanging state for 10-15s. Then, if I haven't touched it during that time, the AOD will reappear. Any ideas? :/
So nobody else has this issue? This is still a problem, even if I press the power button and sometimes I'll want to turn it back on again as I just remember something to do before putting the phone away, it hangs on black for too long to be useful in that moment. The only potential solution is a factory reset?
Even if I lock the screen... If I try to turn it back on too soon, and I think it's specific timing... I have to wait 10-20 seconds. Sounds and vibrations still work.
UPDATE: This is still an issue. I've noticed a few more things, it does really seem like timing and as if there's some function in my phone literally not allowing me to turn on my screen - and I have never timed it but I think pressing buttons (power button) makes it take longer before it will respond again.
Kilva said:
UPDATE: This is still an issue. I've noticed a few more things, it does really seem like timing and as if there's some function in my phone literally not allowing me to turn on my screen - and I have never timed it but I think pressing buttons (power button) makes it take longer before it will respond again.
Click to expand...
Click to collapse
This happens for me also as a point of interest.
I am hoping that O solves it, since the monthly updates have never helped.
I haven't had this happen since upgrading to Oreo a week ago, so far so good!
My z-flip3 5g has a strange problem. If i close it (by folding the screen closed), then after opening (unfolding) the screen and touching the right side button/fingerprint reader to unlock it, i hear the quiet "click" noise that indicates the phone is unlocked, but the screen stays black. i then have to repeatedly push the lock button on the right to lock the phone again and unlock it again. after several attempts the screen finally turns on. sometimes it will go black a few seconds later and the same issue continues. but other times the screen will stay on and work fine.
i have noticed that if i do not close the phone (folding the screen together) then i do NOT encounter this issue. the phone screen turns on when pushing the right side button (or touching the fingerprint sensor) and everything works fine.
this issue started yesterday, a system update installed yesterday as well, could it be related?
i already restarted many times, booted into recovery mode and wiped the cache. nothing has helped. the only way to avoid the problem is by not closing (folding the screen shut) the phone.
One UI v 5.1
Android 13
Security patch level Feb 1, 2023
fully stock/not rooted
I have same behavior. Did you solve this problem?
Unfortunately no. Did a factory reset, hoping that would help, but the issue persists
Mine has recently started doing the same. Last update was right before this started several weeks ago. I don't have mine set to require fingerprint, it should just turn on after opening. If I open it partway, it will turn on, then turn back off when fully opened.
hi,
i have same problem, it's software problem?
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Digital Dragon said:
Not completely sure about that. They update this thing so often, it could be coincedence that it started shortly after an update. I want to try blowing out the hinges as I've got some dust under there that I hear when opening the phone. Definitely not a phone to put in your pocket after working in the wood shop!
Click to expand...
Click to collapse
and don´t take it to the beach either!
What is also strange is that when I close the phone and open it a few seconds later, there is no issues whatsoever. However, if I leave it closed a few minutes, then when opening it, the problems with the screen staying off happen.
Yes, definitely don't take it to the beach!
@netridah , mine is doing exactly that. Which makes me wonder is it a wake issue, or a mechanical/sensor issue with the hinge.
one more to the bill
I checked the flexes and I warmed up the logic nothing works
I have the same issue: Flip 3 - 5G with OneUI 5.1 - 1 April Patch level
When I open the phone I eventually see for less than one second the lock screen, the goes black and unresponsive.
Then I have to press the button to turn the screen off (even if it is already) and then re-press the button or use the fingerprint to turn it on and it will work (eventually, sometime I have to do it a couple of times).
I already googled it on many forums but no solutions, I've tried to:
Disable the always-on display - no result, at first looked like it did the trick but the day after was having the same issue.
Check all the updates of the system components like always on-on display (settings --> lock screen --> always on display --> info), no help everything is up to date.
Hi,
I have the exact same problem, only difference is that I'm on the z flip 4.
I get the black screen and sometimes when opening or closing the phone the screen can flash in a bright yellow or green color.
I got a motherboard but the problem continued
Next step changing screen is very expensive at the moment
This is driving me crazy - also started the day I updated to OneUI 5.1.
Hoping for a solution soon!
I am also encountering this problem, I went to samsung repair shop 1 month out of warranty, sales person said it is a screen issue and needs to be replaced for 430$. Mine was before the update, i took mine near the pool, got wet maybe, as the alarm for usb charging mentioned unplug it immediately, day after it began randomly dark when phone is openned fully. Zflip 3
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
piper_indebt said:
Oh just an update, i did some tinkering today, Good lock all updated, disabled clockface, sprayed some contact cleaner on power button, and hinges, fold close and open for a minute or two, fell asleep for 1 hour, and when I woke up, my screen works back to normal, it wakes up when unfolded, no more waiting or hitting the power button several times. hope this stays like this.
Click to expand...
Click to collapse
How to disable the clockface? what would that contact cleaner be?
thanks
firstchris said:
How to disable the clockface? what would that contact cleaner be?
thanks
Click to expand...
Click to collapse
Hi, few days now, I still have occasional blacking out, I've tried putting my phone on safe mode, and this seems to solve the problem. I suspect it may not be hardware fault, but 3rd party software, "good lock" or something else that conflicts wit one ui, that makes the flipping open lag waking up. Contact cleaner used for electrical stuff
Didnt use my z3 for about a week let the battery drain.. then charged it too 100% without turning on the phone.. my phone back to normal now.. hope it works for you guys
Hello,
I am using Z Flip 4 and last night I started having this problem as well. I can confirm 100% that my phone has no hardware nor a history of impact of any sort that's why it's really frustrating having this kind of problem.
Has anyone already found a resolution for this problem?
Z flip 4 here also. Had the same problem with the screen. Took the phone to Samsung and they changed the screen, frame and back panel's for free under warranty.
They said it's a hardware issue.
So better to take the phone to Samsung.