Smosia's kernel for Android 6.0Kernel for Los13.
First custom kernel for RN3 MTK
Changelog
build #20180309:
- airplane bug fix
- proximity sensor ltr559 fix
- light sensor ltr559 fix
- accelerometer bmi160 fix
build #20170807:
- fix level of battery charge
- slow down CPU from 2.2 GHz to 2.0 GHz (less heat)
- set parameters of interactive govenor to MIUI values (less heat)
- some fixes to alsps. Less EINT Wakelocks in WLD (kernel sleeps good)
build #20170714:
- flashlight and torch now works
- RIL works
build #20161213:
- add BOE_s and SHARP lcm (thx LazyC0DEr)
- fix BOE lcm bug (thx LazyC0DEr)
- fix brightlight of lcms (thx LazyC0DEr)
- charging works
- add battery driver
- Alsps fixes
- add OTG
- sound in headphones
Install:
Install from TWRP 3.х.х
Working:
- RIL
- Flashlight
- Cameras
- USB / MTP / PTP
- Bluetooth
- WiFi
- Vibro
- Accelerometer
- Gyroscope
- Led indications
- Charging
- Sound
- Alsps
- OTG
Bugs:
- very slowly charging (solv: Power off phone, charge for 1 minute, then power on)
- accel not working on some devices
- autobrightness not working on some devices
Not working:
- fingerprint
- ir
- hall sensor
- Magnetometer
Download:
LInk
Thanks to:
- nofearnohappy, LazyC0DEr and Anomalchik for RN2 kernel
- Smosia for RN3 kernel
XDA:DevDB Information
Smosia's kernel, Kernel for the Xiaomi Redmi Note 3
Contributors
Smosia
Source Code: github
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: 0.4
Created 2017-08-08
Last Updated 2018-03-09
a big thank you and everyone is working for this device. it's up to you if RN3 is still alive! You're making a better job than Xiaomi. Hope you'll continue to debug and enhance it!
Tks you bro )))
Gửi từ Redmi Note 3 của tôi bằng cách sử dụng Tapatalk
---------- Post added at 04:22 AM ---------- Previous post was at 03:32 AM ----------
Hey bro !!! I cant install ??? flash to twrp ??? Help me pls :3
Gửi từ Redmi Note 3 của tôi bằng cách sử dụng Tapatalk
buitiendat2000hb said:
Tks you bro )))
Gửi từ Redmi Note 3 của tôi bằng cách sử dụng Tapatalk
---------- Post added at 04:22 AM ---------- Previous post was at 03:32 AM ----------
Hey bro !!! I cant install ??? flash to twrp ??? Help me pls :3
Gửi từ Redmi Note 3 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
If LOS13 is your primary os - install zip through TWRP
If LOS13 is installed with dualbootpatcher - install zip through dualbootpatcher
thanks you
Great
Really nice!Thanks a lot!
thanks
Does this work still continue? For stable version.. thanks for attention.
Wrong comment! Please delete it! Thanks.
Hi! that's good? Or is there only a bug on my device?
Why'd you remove the overclock!!! At least leave us a link so we can have the overclocked kernel! (I know, more heat, but I'm willing to take the risk)
Xornop said:
Why'd you remove the overclock!!! At least leave us a link so we can have the overclocked kernel! (I know, more heat, but I'm willing to take the risk)
Click to expand...
Click to collapse
No, you're not. Up to 108C was taken on the CPU, usually it was 80C even in Telegram for some. Your phone will die pretty soon with such a config
DumF0rGaming said:
No, you're not. Up to 108C was taken on the CPU, usually it was 80C even in Telegram for some. Your phone will die pretty soon with such a config
Click to expand...
Click to collapse
Imma need a cpu-fan blowing at my phone then.
Anyhow I'm actually still interested just to try it once... Link?
Xornop said:
Imma need a cpu-fan blowing at my phone then.
Anyhow I'm actually still interested just to try it once... Link?
Click to expand...
Click to collapse
Just use any 6.x ROM without this new kernel and enjoy 5k more in Antutu until you fry your fingers/device
I hope have a new update
Gửi từ SM-N930F của tôi bằng cách sử dụng Tapatalk
Somebody, help me please!
Can somebody build a custom kernel with external wi-fi adapter support (In this case - ath9k_htc)?
I need kernel for RN3 MTK (Hennessy, without SD)
Any battery life progress? Is there a way, how we can debug what is running inside kernel and fix it?
Pepa489 said:
Any battery life progress? Is there a way, how we can debug what is running inside kernel and fix it?
Click to expand...
Click to collapse
A lot of reversing has been done and keep going even today
DumF0rGaming said:
A lot of reversing has been done and keep going even today
Click to expand...
Click to collapse
Ok, thanks, good to know. :good:
So many update for the kernel of RN3 mtk in github.
Maybe perfect rom coming soon?
Smosia said:
Smosia's kernel for Android 6.0
Kernel for Android 6.0.
First custom kernel for RN3 MTK
Changelog
build #20170807:
- fix level of battery charge
- slow down CPU from 2.2 GHz to 2.0 GHz (less heat)
- set parameters of interactive govenor to MIUI values (less heat)
- some fixes to alsps. Less EINT Wakelocks in WLD (kernel sleeps good)
build #20170714:
- flashlight and torch now works
- RIL works
build #20161213:
- add BOE_s and SHARP lcm (thx LazyC0DEr)
- fix BOE lcm bug (thx LazyC0DEr)
- fix brightlight of lcms (thx LazyC0DEr)
- charging works
- add battery driver
- Alsps fixes
- add OTG
- sound in headphones
Install:
Install from TWRP 3.х.х
Working:
- RIL
- Flashlight
- Cameras
- USB / MTP / PTP
- Bluetooth
- WiFi
- Vibro
- Accelerometer
- Gyroscope
- Led indications
- Charging
- Sound
- Alsps
- OTG
Bugs:
- very slowly charging (solv: Power off phone, charge for 1 minute, then power on)
- accel not working on some devices
- autobrightness not working on some devices
Not working:
- fingerprint
- ir
- hall sensor
- Magnetometer
Download:
LInk
Thanks to:
- nofearnohappy, LazyC0DEr and Anomalchik for RN2 kernel
- Smosia for RN3 kernel
XDA:DevDB Information
Smosia's kernel, Kernel for the Xiaomi Redmi Note 3
Contributors
Smosia
Source Code:http://github.com/smosia/hennessy_3.10.72
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: 0.3
Created 2017-08-08
Last Updated 2017-08-09
Click to expand...
Click to collapse
Related
[6.0.1] VudroidROM S7 Edge Port.
Guide Install:
1. Copy rom to your sdcard
2. reboot recovery
3. Wipe system, data, cache and dalvik
4. Install rom from SDCard and Kernel SLK
5. reboot
6. Enjoy your 100% customized Rom
7. Initial Boot Time is Approximately 10-15 Minutes so be patient. hopefully you'll enjoy what the end result is.
8. Go to Setting - Application - Google services - set full permission
9. Reboot To TWRP recovery Flash Patch Fix .Done
ROM:http://ouo.io/MIRon2
Kernel:http://ouo.io/uI7jJ
Patch Fix:http://ouo.io/wgrCp6
Bug
- NFC
- AOD
- Fingerprint not working
Credits
@bulldog74ts (Rom s7 port note 4 noble)
@CallMESuper (Kernel)
@kykint (Recovery)
@Chainfire (Root)
@Jesse Chan
[/CENTER]
mr vũ ak
kotobodj said:
mr vũ ak
Click to expand...
Click to collapse
Nhầm người rồi
....
Will this work on g901f?
Sent from my SM-G935F using XDA-Developers mobile app
Great job
Gửi từ SM-G906S của tôi bằng cách sử dụng Tapatalk
putti71 said:
Will this work on g901f?
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
No, It's only support g906 for now.
That's a pity
Gesendet von meinem SM-G935F mit Tapatalk
Guys anyone checked if RIL is ok.
As most porting bugs are dialer bug where you cant make a phone call or receive.
Last callmesuper aurora port had this issue.
kotobodj said:
mr vũ ak
Click to expand...
Click to collapse
Em đang nghi ngờ anh ạ. Em pm cho bulldog để hỏi port cho 906 vẫn chưa hồi âm. Rom thì vũ mới tung hôm trước. Em với vũ dùng chung nick này anh ạ.
its work on g900fd?
bjnmonkey77 said:
Information
- Base on Galaxy S7 Edge G935F
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Multiple Languages
Features
- Android 6.0.1
- Full Galaxy S7 Edge features
Installation
- updated the official 6.0.1 is installed with Odin
- install TWRP of kykint
- Full wipe
- Install rom
- done
Bug
AOD - Brightness - Fingerprint -NFC
Link Download
https://goo.gl/pRfGB7
Video Test Boot
https://youtu.be/rQH6VEw762k
Credits
@bulldog74ts (Rom s7 port note 4 noble)
@CallMESuper (Kernel)
@kykint (Recovery)
@Chainfire (Root)
@Jesse Chan
Click to expand...
Click to collapse
Impression upon testing Rom.
1. Usage sometimes not smooth.
2. Optimizing apps on every boot *bug*
3. Automatic brightness is not working.
4.S7 sounds are missing.
5. Photo editor of gallery FC.
Anyways very good hard work.
I will let the Rom to settle for 3 days then give feedback. @bjnmonkey77
Is there any review video for this rom ? Dialer working this rom?
@bjnmonkey77
After 2 days of usage
*Bugs:
1.When charging it shows 100% but after removal of charger it goes to 97%. No problems in my battery its new Anker battery bought it 3 months ago.
2.In Whatsapp app when downloading a media (Video) after it downloads to preview it just waiting circle and sometimes fails. not major maybe caused by network or the app itself.
Suggestion:
Why dont you port Kurama Rom by deiff76. As previously jessechan port this dev rom and it was piece of art.
http://forum.xda-developers.com/note-4/snapdragon-dev/kurama-rom-mm-6-0-1-online-t3374171
Additionally:
* i will try to use kernel from aurora rom ported by callmesuper to check the desmoothness cause *
Tried this rom for 2days now. Only problem i encountered was camera not in full screen, fixed it using App settings from Xposed. Battery is Good if you debloat some useless features from samsung as well optimizing all the apps using, L-Speed, System Tuner Pro and Kernel Audituoir. Best 6.0.1 ported rom so far.
Some setting FC such as Do not disturb, ...
Keyboard sometimes goes wrong!
Can you make a ROM like this for G900S/K/L too? I seéG906/K/L is a Korean device too but while it can run this ROM, mine can't apply any ROM. I'm using G900K.
phamngocduy.1998 said:
Some setting FC such as Do not disturb, ...
Keyboard sometimes goes wrong!
Click to expand...
Click to collapse
Mine works fine both for Do not disturb and keyboard
---------- Post added at 01:38 PM ---------- Previous post was at 01:37 PM ----------
kjimagine27 said:
Can you make a ROM like this for G900S/K/L too? I seéG906/K/L is a Korean device too but while it can run this ROM, mine can't apply any ROM. I'm using G900K.
Click to expand...
Click to collapse
Totally different chipset so it's not possible
Front camera stuck in selfie mode
extra voulume during a call cause the voice communication to hang until the phone is rebooted.
dear @fawadshah33
kindly please dont mislead this user he is asking to make this rom for G900K which is snapdragon 801 and your script is for G906K/S/L which is different chipset Snapdragon 805.
It Finally Here! The Overdose CAF Kernel For Le 2 (Snapdragon)
This Kernel Only Works On 7.x Roms!
Thanks to all the kernel developers for those features, special thanks to codexworks for making lineage for le 2.
Kernel Features:
Added Some Great Governors!
Added Maple,FIOPS,zen & Much More Schedulers!
Tuned Interactive!
NTFS, exFAT, EXT filesystems support.
Adreno idler
Savoca's kcal color control, full control over colors
Based Of CAF
Optimizations (Ofast & Much More!!)
Fingerprint Boost
Compiled with UberTC 4.9 aarch64 toolchain.
Flashing Instructions -
Prefer flashing over your rom's stock kernel for best results
Download Overdose Kernel
Make backup of boot in twrp
Now, wipe dalvik cache and cache
Flash the kernel zip and reboot
In case the kernel doesn't boot, you can restore your boot partition from twrp and you will not lose any data.
Donate To Me -
Paypal
Download Here
XDA:DevDB Information
Overdose Kernel S2, Kernel for the LeEco Le 2
Contributors
DarknessKiller, francisofranco, LLJY, codexworkx, rohitjaiswal, Rishabh Rao
Source Code: [url]https://github.com/OverDose-Kernel/[/URL]
Version Information
Status: Stable
Current Stable Version: 3.1
Stable Release Date: 2017-06-23
Created 2017-05-11
Last Updated 2017-06-23
Changelogs -
Release v3.1
Added Fingerprint Boost
Removed Impulse,Ironactive
Added Hyper,Wheatley
Add More Optimizations
And Many More!
Release v3.0
Rebased Of CAF
Retune Everythings
Tuned Interactive
Release 2.0
First Release On XDA
Latest Source Code
Fix Some Crappy Junks
Tuned Interactive
Release 1
First Release (Private On Telegram Group)
Reserved
@DarknessKiller same as Alpha4 or any changes ?
Woah!!! Finally it's here! :laugh::good:
nice!! Hope your kernel does well.
_LLJY said:
nice!! Hope your kernel does well.
Click to expand...
Click to collapse
you too bro continue building your xperia xz kernel
Make it superb
Sent from my LeEco Le 2 using XDA Labs
Great to see this kernel here... Will install and test.
sorry for the dumb question but... this kernel will help camera stabilty? get annoyng FC on every nougat rom. Thanks in advance
alessiogentile said:
sorry for the dumb question but... this kernel will help camera stabilty? get annoyng FC on every nougat rom. Thanks in advance
Click to expand...
Click to collapse
Erm no.. but the stability is pretty stable on latest roms i didnt face
Fc on camera
Sent from my LeEco Le 2 using XDA Labs
alessiogentile said:
sorry for the dumb question but... this kernel will help camera stabilty? get annoyng FC on every nougat rom. Thanks in advance
Click to expand...
Click to collapse
Use google camera...
Awesome! Thanks so much.
No support for quick charge?? Cause the charging time seems to be long. I'm using OD over aicp may 8 build.
123drd said:
No support for quick charge?? Cause the charging time seems to be long. I'm using OD over aicp may 8 build.
Click to expand...
Click to collapse
Charging is fine here.. Don't use your phone while charging....And also there's a bug going on in which charging connects and disconnects automatically delaying the charging time....
123drd said:
No support for quick charge?? Cause the charging time seems to be long. I'm using OD over aicp may 8 build.
Click to expand...
Click to collapse
Currently bugs on roms bro... Not kernel
Sent from my LeEco Le 2 using XDA Labs
Everything is working great for me so far.
Can you please add 160 or 200 MHz as min for GPU. And 200 MHz as min for CPU. These will improve battery.
Also under battery section, add a control to tune battery charging current to control fast charging.
Hotplug section needs to have more controls to tune accordingly.
DarknessKiller said:
Currently bugs on roms bro... Not kernel
Click to expand...
Click to collapse
Should have thought about it , anyway great job with the kernel bro, works great, can you add a couple of Hot plugging drivers, if you could, it would be amazing
venreddy said:
Can you please add 160 or 200 MHz as min for GPU. And 200 MHz as min for CPU. These will improve battery.
Also under battery section, add a control to tune battery charging current to control fast charging.
Hotplug section needs to have more controls to tune accordingly.
Click to expand...
Click to collapse
I will think ahout it.. of the underclock
Erm We Have Quick Charge So There really nothing to add on Battery Sections
Hotplug i will add just for searching for a solution to disable core control
Sent from my LeEco Le 2 using XDA Labs
venreddy said:
Can you please add 160 or 200 MHz as min for GPU. And 200 MHz as min for CPU. These will improve battery.
Also under battery section, add a control to tune battery charging current to control fast charging.
Hotplug section needs to have more controls to tune accordingly.
Click to expand...
Click to collapse
Well it not recommanded to underclock that much
Sent from my LeEco Le 2 using XDA Labs
Forked version of @Tkkg1994 's IronKernel for Galaxy Tab S adapted to our Note 3 N900 (ha3g)
All thanks to @Tkkg1994 for his awesome work
Cut the introduction and skip to the main point...
PREREQUISITE
-Must be running any of the TW MM ported rom like Magma-NX VX1.
-Using latest modem, bootloader and TWRP.
FEATURES
Based on the @Tkkg1994 's IronKernel so this kernel should have every features the IronKernel brings to the table.
But I will introduce some in here:
-Latest T805XXU1CPK5 source from samsung for universal5420 platform (thats how I can port the kernel to our ha3g)
-Latest T805XXU1CPK2 ramdisk adapted to ha3g
-UberTC 5.3 toolchain with -Ofast and GCC big.LITTLE flags
-Kernel optimized with NEON and VFPv4 (hard float)
-Kernel upstreamed to 3.4.113
-SEANDROIDENFORCE-ed
-UKSM supported
-Unlocked TCP controls.
-SELINUX set to permissive
-Samsung UHQA supported
-Disabled CRC SPI (should bring about 30% in NAND speed)
-All crypto engines enabled.
-F2FS supported
-Performance and Batterylife improved
Bugs/Problems:
-None, perfectly working.
Instructions:
1. Download kernel
2. Boot into recovery mode
3. Flash kernel
4. Flash any other file which affects ramdisk (such as supersu, xposed, magisk etc.)
5. Reboot
Download
Download
Changelogs
Code:
-v1.0.2:
+ GPU OC to 695 MHz
+ LED Control
+ mDnie control
+ Power-suspend
+ WQ Power-efficient
+ zRam and zSwap
+ Optimized I/o
+ ARCH-Power
+ NEON-Accelerated cryptos
+ Fully optimized for VFPv4 FPU
+ Fully optimized for NEON
+ Fast-charge
+ Various sys-fs tweaks
+ Samsung Low power audio mode supports
+ ...
-v1.0.1:
+Fixed proximity sensor issue
+Kernel compiled with more optimization flags
+Disabled some logging
+Enabled some ARM errata for our SoC
+Enabled ESD defense feature for our ha3g
+Updated battery charging IC control mechanism
+...
-v1.0:
Initial release
To-do list
Code:
-Add CPU/GPU voltage control
-Add more i/o sched
-Add more cpu gov
-Optimize the GPU performace
-Update ext4/f2fs implentation
-....
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :fingers-crossed::fingers-crossed:
Donate to me
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- tkkg1994
- duki994
- faux123
- jcadduono
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
XDA:DevDB Information
SilverNote Kernel for N900 (ha3g), Kernel for the Samsung Galaxy Note 3
Contributors
BlackSoulxxx
Source Code: github.com/blacksoulxxx/silvernote
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v1.0.2
Created 2017-12-28
Last Updated 2017-12-29
Reserved #2
Reserved #3
Going to Flash .. all the best
Where is the download link?
Baluki2017 said:
Where is the download link?
Click to expand...
Click to collapse
In the download tab.
I will add the direct link shortly.
OK. Thanks.
SilverNote Kernel Download link....
https://mega.nz/#!6VRHXDSY!dPxWBHeNJT0U8vhPeY6hCXVGonQ2b28Ks0NyUer8j7M
Sir, i and two friend have a problem. Proximity sensor incall is not working for this kernel.
I hope this will improve the performance even more in the magma rom.
Hi
I installed this in magma but loose my root . No more recovery how I solve this .
Thanks
Thank you for new kernal Proximity sensor not working in call
How to install this kernel?
I can only install it like boot or recovery
DuhanSoysal said:
Sir, i and two friend have a problem. Proximity sensor incall is not working for this kernel.
Click to expand...
Click to collapse
kader6000 said:
Thank you for new kernal Proximity sensor not working in call
Click to expand...
Click to collapse
Thanks for trying. Yes I've checked and the proximity sensor isnt working (sensor working but buggy driver i think, MAX88922, light sensor working but proximity one keep return max value) with this release. I will try to fix..:good::good:
BlackSoulxxx said:
Thanks for trying. Yes I've checked and the proximity sensor isnt working (sensor working but buggy driver i think, MAX88922, light sensor working but proximity one keep return max value) with this release. I will try to fix..:good::good:
Click to expand...
Click to collapse
Thank you sir, we will be waiting for you and your fixes ^^
BlackSoulxxx said:
Thanks for trying. Yes I've checked and the proximity sensor isnt working (sensor working but buggy driver i think, MAX88922, light sensor working but proximity one keep return max value) with this release. I will try to fix..:good::good:
Click to expand...
Click to collapse
Yahia anglo has slove this from his kernal and he redy to help you with this issue jone group in telegram and talk with him thats will be great to have rom with no issue
kader6000 said:
Yahia anglo has slove this from his kernal and he redy to help you with this issue jone group in telegram and talk with him thats will be great to have rom with no issue
Click to expand...
Click to collapse
Can you point me to which Telegram group? Seems like I dont know about it. Thanks.
DuhanSoysal said:
Sir, i and two friend have a problem. Proximity sensor incall is not working for this kernel.
Click to expand...
Click to collapse
Mee too (((
BlackSoulxxx said:
Can you point me to which Telegram group? Seems like I dont know about it. Thanks.
Click to expand...
Click to collapse
https://t.me/Note3Exynos
This group
I feel or it seems to me, lags 5-7% from before, In my humble opinion
IceCold Kernel
IceCold Kernel is a basic kernel for whyred (Redmi Note 5) that contains some special features and aims for best balance between performance and battery.
Features included
- Rebased to pie kernel source and caf base
- Merged Latest CAF Tag
- Implemented EAS (EM by tytydraco)
- top-app stune boost hardcoded to 1
- NTFS support
- Timer tick rate 80Hz
- Many things added to power efficient workqueue
- Update TAS2557
- schedutil default governor
- Sound control
- More sound improvements
- DTS Support
- Anxiety default I/O scheduler
- HDR support
- Charging Limiter
- Night Charge
- Use lpm parameters of sdm845
- Rapid GC for f2fs
- Simple Thermal
- Only wake GPU when needed (not on touch)
- TCP improvements
- Per-Process reclaim
- Remove debugfs
- Nearly complete VLA free
- Remove inefficient frequencies
- Simple Low Memory Killer
- Enable Idle Dynticks
- Other under the hood stuff
How to install DTS Sound mod
Credits to the developer and "porter" of this awesome sound mod
Issues
U tell me (got no issues with it, pretty stable)
Support
I only support Custom ROMs... It is working on MIUI but I won't fix issues for MIUI! (As example Kernelversion shows unavailable)
Also it's confirmed to work too on Mi6x (Wayne) but i won't support it officially because i don't own this device!
FlashingMake sure u backup ur current Kernel before flashing! I'm not taking responsibility for any damage!
If you installed a custom Kernel before please flash the boot.img of the currently installed ROM or dirty flash the ROM (I prefer dirty flashing)
Then just flash the zip file through TWRP...
And have fun with the full "IceCold Experience"
Download
Stable Builds
TestBuilds will be only available in Telegram Group!
If there are any questions, hints or something like that feel free to post them!
Or join Telegram Group
https://t.me/IceColdKernel
Credits:
srfarias - for the caf base
tytdraco- for his energy model
uvera - Helped implementing simple thermal
kerneltoast - for many improvements
kdrag0n - also many improvements
Information
IceCold Kernel for Redmi Note 5 Pro (aka whyred)
Contributors
lexx.ps (PrimoDev23)
Source Code: https://github.com/PrimoDev23/kernel_xiaomi_whyred
Version Information
Status: Stable Release
Created 2019-01-23
Last Updated 2019-06-26
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
ARNOB XENON said:
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
Click to expand...
Click to collapse
Ty for testing
Added the information in the thread
Can f2fs work with Xiaomi.eu or other miui roms?
kostas gp said:
Can f2fs work with Xiaomi.eu or other miui roms?
Click to expand...
Click to collapse
rom nees to support this as well as twrp and kernel.. theres one miui rom named Kosmos that supports f2fs
https://www.youtube.com/watch?v=x7RKyAd-scE
ARNOB XENON said:
I can confirm!!! The kernel is 100% working on mi 6x(Wayne) with F2FS.
Tnks..
Click to expand...
Click to collapse
W8 xd
How could u test? Anykernel will not install on wayne, it will cancel...
I didn't made the installer script compatible with wayne yet
Edit: Uploaded a stable version with some patches i've got working, should be smooth.
Also added wayne in the installer script so wayne users can flash it!
Keep in mind I don't officially support it
Good that you decided to start your own topic!
raptorddd said:
rom nees to support this as well as twrp and kernel.. theres one miui rom named Kosmos that supports f2fs
https://www.youtube.com/watch?v=x7RKyAd-scE
Click to expand...
Click to collapse
Thanks for answering
lexx.ps said:
W8 xd
How could u test? Anykernel will not install on wayne, it will cancel...
I didn't made the installer script compatible with wayne yet
Edit: Uploaded a stable version with some patches i've got working, should be smooth.
Also added wayne in the installer script so wayne users can flash it!
Keep in mind I don't officially support it
Click to expand...
Click to collapse
wired problem on wayne after reboot audio port is not working
ARNOB XENON said:
wired problem on wayne after reboot audio port is not working
Click to expand...
Click to collapse
As I mentioned I don't support this device. Try wiping cache and dalvik.
Reboot again won't fix?
Normal audio working?
BT-Audio working?
Otherwise I can't help u because i only have whyred and not wayne.
lexx.ps said:
As I mentioned I don't support this device. Try wiping cache and dalvik.
Reboot again won't fix?
Normal audio working?
BT-Audio working?
Otherwise I can't help u because i only have whyred and not wayne.
Click to expand...
Click to collapse
From 1st boot every thing works all audio after a reboot only headphone is not detecting.
ARNOB XENON said:
From 1st boot every thing works all audio after a reboot only headphone is not detecting.
Click to expand...
Click to collapse
Tried wiping caches?
I think it won't help but it's worth a try i think, else u have to switch kernel (eventually I will find a fix for it later)
Awesome kernel. Smooth for pubg..
alvinrs said:
Awesome kernel. Smooth for pubg..
Click to expand...
Click to collapse
It really is? Heard it has some issues on pubg
Edit: Should work, working on an update and trying some things
lexx.ps said:
Thanks for answering
Click to expand...
Click to collapse
is fsync enabled or disabled .?
raptorddd said:
is fsync enabled or disabled .?
Click to expand...
Click to collapse
Should be enabled, not sure but find it no where in config
Updated some Informations in OP!
thx for your work, there is no way to apply some configs on cpu section - kernel auditor?
EDIT: Nevermind, I was trying to change the settings on the schedutil governor.
Keep the good work, thx!
Is it this undervolt kernel stable ? I mean will it cause data loss (bootloop) or Sleep Of Death ? Thanks
Ale uto said:
Is it this undervolt kernel stable ? I mean will it cause data loss (bootloop) or Sleep Of Death ? Thanks
Click to expand...
Click to collapse
No it's fine, using it myself and never got bootloop or any problem with it
This is temporary discription. Will be updated later.
Havoc-OS 3.x is based on AOSP, inspired by Google Pixel.
Has a refined Material Design 2 UI by @SKULSHADY.
So many features that you probably won't find in any ROM.
All you can dream of and all you'll ever need.
Just flash and enjoy...
Lead Developers:
SKULSHADY (Anushek Prasal)
ZeNiXxX (Viktor Hermann)[/SIZE]
Installation:
1. Download the ROM, GApps (Optional), Magisk (Optional) from the links above.
2. Wipe System, Data, Dalvik, Cache.
3. Flash the ROM, GApps (Optional), Magisk (Optional).
4. Reboot and Enjoy.
Links:
ROM: https://sourceforge.net/projects/havoc-os/files/
Open GApps: http://opengapps.org
Telegram Support Group: https://t.me/havocofficial
Telegram Announcements Channel: https://t.me/Havoc_OS
Sources:
https://github.com/Havoc-OS
https://github.com/Havoc-Devices
XDA:DevDB Information
[ROM]-[10-01-2020]-Havoc-OS-3.0-[10.0]-[Official], ROM for the Redmi K20 Pro
Contributors
wajidkh08
Source Code: https://github.com/Havoc-OS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 11 Vendor/Firmware
Based On: AOSP
Version Information
Status: Beta
Created 2019-12-21
Last Updated 2020-01-10
Reserved
Reserved
Working very well. FP is great. dtw works BUT double tap to check phone in ambient display settings does not work for me at least.
raud83 said:
Working very well. FP is great. dtw works BUT double tap to check phone in ambient display settings does not work for me at least.
Click to expand...
Click to collapse
Double tap to wake is also not working on my device...
---------- Post added at 04:15 PM ---------- Previous post was at 04:12 PM ----------
Awesome rom!!!
But just want to point out that 72Hz overclock is not as smooth. Facing frequent frame drops here and there. Also at high brightness and with 72Hz (with dc dimming on) screen appears to flicker on some colors. On other roms it runs smooth.
But thanks for this amazing rom
Need to flash Vendor?
Gửi từ Redmi K20 Pro của tôi bằng cách sử dụng Tapatalk
Is it only me or is it not possible to download Android 10 base GApps from the link provided? Which GApps do you use?
raud83 said:
Working very well. FP is great. dtw works BUT double tap to check phone in ambient display settings does not work for me at least.
Click to expand...
Click to collapse
Disable double tap from gesture, enable it again, set to none , now set to double tap, and disable it.Then go to ambient setting, and toggle double tap
Screen recording seems to be choppy. Is this the case for everybody else?
userguy said:
Is it only me or is it not possible to download Android 10 base GApps from the link provided? Which GApps do you use?
Click to expand...
Click to collapse
Use the gapps linked in another Havoc thread. Beta gapps dated 0912
Hey everybody,
As I'm quite busy atm, Wajid is helpfully taking over as the official maintainer (thanks bro).
If there's any confusion, use these builds - mine are old and out of date.
Enjoy!
=============================
Havoc-OS v3.0 Official Update
Android 10
=============================
Date: 22-12-2019
Device: k20pro/mi9tpro (raphael)
Maintainer: @iTzwajid
Changelog: https://t.me/Havoc_OS/1740
Device Changelog:
• Improve fod
• Added miui anx cam
Download Link: https://bit.ly/36X1xOf
XDA Thread Link: https://bit.ly/34JEuFe
deleted..
Hello everybody!
Can I flash it over vendor+firmware 11.0.4? Will FOD work flawlessly, without issue? Are there other issues with 11.0.4.? Which vendor firmware number is best to use with this Christmas edition?
flashed 21-12-2019
problem found
1.fod first attempt got fail,second working,sometimes works great and sometime it's too bad
2.notification sound got broken from apps.
3.poor sound like lock /unlock etc
4.poor customization compare to havoc 9 pie,maybe from source.
5.need to add launchair launcher like havoc 9
Asrafull said:
flashed 21-12-2019
problem found
1.fod first attempt got fail,second working,sometimes works great and sometime it's too bad
2.notification sound got broken from apps.
3.poor sound like lock /unlock etc
4.poor customization compare to havoc 9 pie,maybe from source.
5.need to add launchair launcher like havoc 9
Click to expand...
Click to collapse
How did you flash it? Over which vendor and firmware?
Asrafull said:
flashed 21-12-2019
problem found
1.fod first attempt got fail,second working,sometimes works great and sometime it's too bad
2.notification sound got broken from apps.
3.poor sound like lock /unlock etc
4.poor customization compare to havoc 9 pie,maybe from source.
5.need to add launchair launcher like havoc 9
Click to expand...
Click to collapse
whatever you reported everything working good for me.
wajidkh08 said:
whatever you reported everything working good for me.
Click to expand...
Click to collapse
Hello wajidkh08, which MIUI 11 Vendor/Firmware did you use, that everything is working properly? Cheers mate.
A couple of questions:
1. Has anyone tried this with EEA 11.0.3.0 vendor? If yes, does the FP reader work well? Does it open with unregistered fingers? I'm asking since I have this problem on latest LOS with EEA vendor.
2. Does Havoc have a working setting to invert navigation bar buttons (i.e. back button to the right and multitasking button to the left)? Some other ROMs are either missing the setting or it doesn't work.
Edit:
One more: Do NFC payments with Google Pay work with the Magisk fixes? On LOS it doesn't work even with the fixes.
Wow excellent ROM in the row...top in the list....FP is absolutely fantastic...rombis smooth and fast....thanks dev...guys I swear no annoying bugs.