Hi guys wonder if u can help me please. There might already be a topic regarding this. But I can't seem to get auto rotate working. Wonder if u guys can tell me why please.
Did you try toggling the auto-rotate icon in QuickSettings?
Yes i have done that. I've G Calibrated and done a factory reset. Still the same. Worked fine till the other day.
Just to update. I've managed to sort the issue by tapping the phone twice on my hand.and now it rotates again weird but it works. Read it on a site and tried it and it works don't no why
Hmmm . . . sounds like a hardware issue. Reminds me of the sporadic vibration on my M9 that could be "reset" by banging the phone, at least until it died completely.
I accidentally dropped my phone, 3 days after having it, and it stopped auto rotating, also the double tap to wake stopped as well. Noticed in camera the icons wouldn't rotate. I did the old 6inch drop onto its corner on carpet and it recalibrated the sensor and it worked again.
Related
I switched roms to cog 4 and I didnt notice anything weird and then a few hours later I noticed that my auto rotate was not working. when I say not working I mean relly not working, when I open any app it will only open in landscape mode and the home screen is only viewable in portrait mode.
I have flashed back to stock, done a master clear, reflashed cog 4. I am at a loss now. Any help would really be appreciated.
I don't know if it will work for you, but......go to settings; display; scroll down to horizontal calibration and lay your phone on its back....follow directions.....and hopefully all is better.
I definitely was overthinking the problem and getting NO help from those in the know. I UTFSE (nice acronym) for hours and assumed that one of the ROMs had an I9000 kernel and corrupted the accelerometer.
I was probably too tired from nicely suggested (UsingTheF......SearchEngine) and assumed horizontal was from Upright Y axis, X side axis, but not Z (face up).
My own fault and probably one of the reasons no one chose to answer my requests.
Holy hell I must have tried this 5 times before I wiped and then loaded a new rom. everytime I did it it would callibrate it was just stuck dead in the center. I did it now and it worked.
Thank you for getting me to retry the simple things (now I seem like a moron, but I swear I really did try it haha)
Hi. I have noticed some problems with proximity sensor on my sensation. When I make phonecall my screen wont shut down at all, i have tried vipers jb and albinos and then android1234567 4.3 so I think problem is with hw, anyone what I should do?
I have the same issue with the roms u mentionned, and in my case dunno if it's HW related because with skype and viber the proximity sensor works fine!
This helped me....sensors seem to work again
Hi,
i also (and a lot of people in fact) have the dreaded proximity and lightsensor problem. And indeed there seems to be no solution... People have been reseting and reflashing the Sensation till it drove them mad, without the problem solved... The problem seem to start when the Sensation was upgraded to ICS, and seems software related...
In my quest to solve the problem I stumbled upon a solution on the htcsensationforum.... and gues what, it seems to work for me, that is, the sensors work more often now.
I quote the solution, since i cannot paste the link;
Hi Tim.
I had the same problem. Phone is now fine after 24 hrs. Here's what I changed:
1. Turned off 'Pocket Mode'. Settings -> Sound -> Pocket Mode. No obvious change by itself
2. Turned off 'Fas tboot'. Settings -> Power -> Fast boot.
3. Turned off, removed battery, waited 30 secs and powered back on.
Simple as that! The proximity sensor was glowing occassionally after the upgrade, and that has gone away too. On the bonus front my battery life has never been so good (using about 60% of what it used to)!!!
Cheers.
Click to expand...
Click to collapse
Don't know how long this solution will hold, but it seems that the pocket mode and / or quickboot option are causing the problems... What i use to check the sensors behavior is the free app android sensor box, found in the playstore.
Maybe one of the devs here can take a look at this solution, and can come up with a permanent solution to have the proximity and lightsensor working normal again...:good:
Just my 2 pence on an old pain in the *ss problem, thanks go to Maestro @ htcsensationforum for his solution...
Cheers:cyclops:
Was anyone experiencing the display randomly turning on & won't dim itself off. I am using the fingerprint lock so it stays on the screen asking for the alternate password. This happens while charging & when idle. The phone stays on until you press the power button. I am testing if is something to do with the fingerprint lock, switching to pattern lock. any ideas?
I also use fingerprint unlock and have noticed that the display will randomly turn on and ask for the alternative password. I just got the phone this past Sunday (6/8) and all I've really done to it is add the fingerprint security.
what ROM are you running?
youdoofus said:
what ROM are you running?
Click to expand...
Click to collapse
Stock ROM, no changes.
I've also seen this. Usually happens to me at night for some reason. Screen turns on and when I hit the side button to turn off the screen it goes out for a few seconds then lights up again. Have to reboot to fix it.
Mine does it during the day at work quite a bit, I think it is from the home button being pushed in my pocket. It really should be associated with the light/proximity sensor as to when the button will work.
Having the same problem with both swipe and fingerprint unlock. I can understand swipe, fingerprint works better in my pocket then with my finger
Mine is constantly turning on in my pocket now. I have an otterbox commuter on it and edges are raised pretty good, doesn't seem like my leg would hit the home button but it's hard to tell
Only happens to me when connectivity state changes, or music skips for a notification
Sent from my SM-G900P using Tapatalk
I am having this problem on stock unrooted ND2 as well as RDDT. I also noticed on both that I get notification sounds with NO notifications showing up. So I have my notification sound going off a few times each hour for no reason unless I leave my phone on silent.
As far as the screen coming on randomly, I found that disabling air wake has helped a little bit. Especially overnight, I leave my phone next to my pillow (yea, I am a junkie...) and the screen would turn itself on every time I rolled over, and the screen would stay on after that until I woke up and turned it off. I know it was staying on because a couple of times I reached over the phone, screen turned on and I watched it for about 5 minutes (screen time out is set to 15 seconds) and it didn't shut off.
TL;DR Turn off air wake - Need help figuring out phantom notifications (still exist after multiple factory resets and almost no apps installed)
My issue stopped once I installed a glass screen saver. Home button is now countersunk with the 0.33 mm. Cover & review.
http://www.amazon.com/Tech-Armor-Samsung-Ballistic-Protector/dp/B00IGISUTG/ref=cm_cr_pr_product_top
http://www.amazon.com/Tech-Armor-Sa...tBy=bySubmissionDateDescending#R1R8876D8WLXE3
I installed the same one, lol. It still does it, not as often though
I was using standard pattern lock screen on stock rooted and had this issue. It was the wave to wakeup feature that was causing it. I turned it off and it went away. 3 days with no waking by itself.
I've never had that turned on.
looks like you guys turn on air wake and it's working sensetively. on the contrary, mine is numb
yueyejinghun said:
looks like you guys turn on air wake and it's working sensetively. on the contrary, mine is numb
Click to expand...
Click to collapse
It was numb for me too when it wasn't being awakened by ghosts. The other guy said he didn't have that feature on so not sure what the other issue(s) is/are.
GorillaPimp said:
It was numb for me too when it wasn't being awakened by ghosts. The other guy said he didn't have that feature on so not sure what the other issue(s) is/are.
Click to expand...
Click to collapse
air wake is a nice feature to extend the lives of home & power button, except it always makes me look like an idiot when I am waving my palm over the phone again and again.
I tried to set the mode to unlock by fingerprint and keep air wake on for a whole day, but I didn't encounter that problem. maybe it just affects some devices, maybe it's not air wake.
Anybody found a real solution for this inconvenient?!
This only happens at Lollipop... 2 months ago I updated and because this annoying issue that was draining my battery I downgraded to Kit Kat...
Last weekend I decided to give another shot to Lollipop, but the issue remains...
I tried all settings relative to screen and lock screen and nothing worked!
andreluigo said:
Anybody found a real solution for this inconvenient?!
This only happens at Lollipop... 2 months ago I updated and because this annoying issue that was draining my battery I downgraded to Kit Kat...
Last weekend I decided to give another shot to Lollipop, but the issue remains...
I tried all settings relative to screen and lock screen and nothing worked!
Click to expand...
Click to collapse
I have the same problem. My battery has been life does not even last me until the end of work. Trying a fix now that I just thought of though. This problem is incredibly frustrating at night too.
I believe its the connection optimizer. Go to Settings > More networks > Mobile networks > Connections optimizer:
Then Uncheck "Connections Optimizer"
Seems to be working so far! So hopefully this helps the rest of you!
This Fix did not work still perplexed by this problem.
After rooting and removing a lot of bloat, I got rid of it. I have no idea which app it is though. Maybe an xposed module logging screen wakes could be of assistance. But I too noticed it immediately after flashing a lollipop ROM.
Hi all,
I know some of you faced similar problems with other phones in the past but I just wanna know if it is a software bug or an actual hardware issue so that I can return my handset and get it fixed.
Auto Rotate kinda acts strangely. Doesn't even respond properly and the orientation remains locked. I tried using different launchers hoping it would fix the issue somehow. Nothing seems to work and the strange thing is, while facing this issue, I opened CPU Z to check if the sensors are working properly or not but to my surprise, the sensors are not reading any data. After a restart, all seems to work fine including rotation. But again after a few hours, the same issue occurs. Any fix guys??
santoshcoolhere said:
Hi all,
I know some of you faced similar problems with other phones in the past but I just wanna know if it is a software bug or an actual hardware issue so that I can return my handset and get it fixed.
Auto Rotate kinda acts strangely. Doesn't even respond properly and the orientation remains locked. I tried using different launchers hoping it would fix the issue somehow. Nothing seems to work and the strange thing is, while facing this issue, I opened CPU Z to check if the sensors are working properly or not but to my surprise, the sensors are not reading any data. After a restart, all seems to work fine including rotation. But again after a few hours, the same issue occurs. Any fix guys??
Click to expand...
Click to collapse
Is your smart rotate on? Switch it off to get normal rotation
I suppose factory reset is a last resort. If you still have issues exchange.
Same problem. Z3 autorotate stupidly (does not switch to landscape automatically and then when I want it back to portrait it remains landscape, have to disable rotation). By the way Smart Rotate feature is bugged.
@unmaskedfalesh yes....its turned on. Yet it doesnt work most of the times.
@bel57 yep dude...same problem here....
@abhinav.tella yes I will do that. thank you
santoshcoolhere said:
@unmaskedfalesh yes....its turned on. Yet it doesnt work most of the times.
@bel57 yep dude...same problem here....
@abhinav.tella yes I will do that. thank you
Click to expand...
Click to collapse
U need to hav smart rotate off for normal..rotation.. Had same issue in the beginning wen i firstly got my mobile...smart rotate works different than normal rotation.. Just switch off the smart rotate and there u go...
unmaskedfalesh said:
U need to hav smart rotate off for normal..rotation.. Had same issue in the beginning wen i firstly got my mobile...smart rotate works different than normal rotation.. Just switch off the smart rotate and there u go...
Click to expand...
Click to collapse
I'm not sure if your"..." And statement were meant to be condescending but it came off that way. This suggestion was already made and it didn't help me, don't know about the others.
Hey guys, I've been playing with the phones setup for a few days now figuring everything out and how it works, and I noticed the left fingerprint sensor isn't half as sensitive as the right one. Anybody else notice this?
I've tried setting up the sensors to be back on the left sensor and home on the right one and the home works perfectly, but the back on the left works only 10% of the time. (I am left handed so I try to use the thumb/left for back).. A software update will fix this I'm sure (If it IS software related, and not a faulty phone I have.)
I think I have this set up in the wrong section??? Moderators could you move it please if it is. Thanks!
rodpgfx said:
Hey guys, I've been playing with the phones setup for a few days now figuring everything out and how it works, and I noticed the left fingerprint sensor isn't half as sensitive as the right one. Anybody else notice this?
I've tried setting up the sensors to be back on the left sensor and home on the right one and the home works perfectly, but the back on the left works only 10% of the time. (I am left handed so I try to use the thumb/left for back).. A software update will fix this I'm sure (If it IS software related, and not a faulty phone I have.)
I think I have this set up in the wrong section??? Moderators could you move it please if it is. Thanks!
Click to expand...
Click to collapse
Actually, my fp scanner are perfectly fast (and equal).
Try to remove both configurations or reset the firmware - it might be a hardware issue that requires you to send it back!
Cheers