Hi again.. i am trying to flash 7.0 rom with odin but it fails. It doesnt even start the flashing process. I just get an FAIL! mesage. In download mode it shows secure download fail: bootloader.
Here are some details about my phone can someonw please find me a firmware version that will work.
AP G920FXXU5DPL4 (6.0.1)
CP G90FXXU5DPL4
CSC G920FDDX5DPL1
Any solutions?
Download lastest Firmware from sammobile for G920F and flash normally. probably the one you're trying to flash it's old
Related
hi
my n8000 locked and after i reboot screen was only many lines.
i tried to flash it but i can just go to odin mode.
no cwm mode.
no samsung screen.
just downloading screen and odin mode.
when i tried to flash official rom for my country it failed on sboot.bin.
in odin mode it said:
ODIN MODE
PRODUCT NAME: GT-N8000
CUSTOM BINARY DOWNLOAD: Yes ( 7 counts )
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
i am waiting for your syggestion for solve this prob.
Suggest stock rom flash via Odin and report where Odin fails .
Download a new stock rom as existing may be corrupt .
Fails at Nand Write you need a new motherboard .
JJEgan said:
Suggest stock rom flash via Odin and report where Odin fails .
Download a new stock rom as existing may be corrupt .
Fails at Nand Write you need a new motherboard .
Click to expand...
Click to collapse
i did stock rom flash via odin but it fails at sboot.bin
BEFORE MY PHONE RUNNING ON XSI 5.0 FIRMWARE
AND NOW BY THIS PROCEDURE
SUCCESFUL TO INSTALL BRI 5.0
THIS IS FOR MISMATCH CATCH.IMG.EXT4
ODIN FAIL WHO TRY IT
FOR FLASH WTH HONGKONG TAIWAT FIRMWAE 5.0 WORKING THIS PIT
FIRST U DOWNLOAD
N9005ZSUGOK2 N9005OZSGOK2 N9005ZSUGOK2 FROM SAMMOBILE
THEN DOWNLOAD PIT FILE GIVEN LINK
then download Odin_v3.09
select pit
pad tab select firmware
before connect phone enable usb debugging
then connect phone with download mode
FLASH FIRMWARE
WAIT 5 MINUTE YOUR PHONE STUCK IN BOOT
MUST CWM RECOVERY n9005-cwm-recovery-6.0.4.7-kk(0125) COMPALSARY FLASH
NOW REMOVE BATTERY AND INSERT IT AGAIN
AND GO IN DOWNLOAD MODE
THEN DOWNLOAD CWM RECOVERY FILE GIVEN LINK
CWM RECOVERY.TAR UNDER PDA TAB AND FLASH IT
THEN YOUR PHONE START IN NORMAL BOOT AND EVERYTHING WORKING PERFECTLY
So i rooted my s6 and install twrp on it. Then when i tried to do a back up of my rom ( it's the first thing you need to before installing other rom's) and then my phone won't turn on?? The samsung logo came and then it turns off and then again the samsung logo and again,... Then i tried to install my firmware rom on it with odin... it fails i tried other firmwares but they don't work... one of them was installed and when it reboots it keeps saying "installing system recovery" and then it goes on the samsung logo and then again "installing system recovery".... theeeeen i tried to do it with Kies : DON'T WORKED
i tried the CF auto root : DON'T WORKED
I don't know what to do now...
i tried:
- firmware with Odin
- recovery with Kies
- CF auto root with Odin
please help me !!!
i can get in to download mode but then?
ps: Sorry for the bad English!!
Try to install this software via Odin v3.11.1
Don't forget to select PIT file on Odin!!!!
https://docs.google.com/uc?id=0B3U72O5ZZ8z-STJiWWJmR2hPM1U&export=download
forumber2 said:
Try to install this software via Odin v3.11.1
Don't forget to select PIT file on Odin!!!!
https://docs.google.com/uc?id=0B3U72O5ZZ8z-STJiWWJmR2hPM1U&export=download
Click to expand...
Click to collapse
my buildnumber is g920fxxu3dpd8. Is it the same as you send me? and what file do i need to do in pit?? the link above?
izzeddine9 said:
my buildnumber is g920fxxu3dpd8. Is it the same as you send me? and what file do i need to do in pit?? the link above?
Click to expand...
Click to collapse
i tried the link above... the firmware didn't fail with odin ( the other do that i tried do) but then my phone just start on de samsung logo and then turns off and on and off and when i remove the cable it's just black?:crying:
I have a G930U phone, and wanted to to flash G930V firmware to get the wifi-calling. I downloaded the firmware for Verion (G930VVRS4APH1) 4 files. and when I flashed in Odin I got this error:
Volume Size is too big 1152000 < 1354240
ODIN: INVALID id ext4 image
I cannot boot the phone and I don't know what to do. I did some search and it said that I need to flash the PIT file. I am not sure which PIT file (U vs V) and where to get it? Please help
I just flashed again, but used CSC and not Home CSC, and it worked! It is booting up now
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
ToadNugget said:
So I have an old SM-G920W8 that was with Rogers, but when I turned it on it would get stuck on the galaxy s6 screen. So I tried entering the recovery thing or whatever it was called but there was text at the top left that said "recovery is not seandroid enforcing", so then I tried to flash the stock firmware back on with Odin 3.10.6 with the ROM I got from Frija, but it fails every time.
Click to expand...
Click to collapse
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
It_ler said:
Hmm ... Should work.
Have you downloaded the correct firmware?
Best to check the installation guide again and repeat it:
Samsung Galaxy S6 SM-G920W8 Stock Firmware (ROM Flash File) [DOWNLOAD]
Download the official Samsung Galaxy S6 SM-G920W8 Stock Firmware ROM (Flash File) for your Samsung Smartphone and unbrick the device, fix boot loop and more.
firmwarepanda.com
Keep in mind that flashing a different CSC with Odin needs doing a factory reset with doing data.
That is why I always prefer using "Home_CSC" to keep my CSC and data.
Click to expand...
Click to collapse
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
ToadNugget said:
OK I tried that, but then it said "SW REV. CHECK FAIL. DEVICE: 5, BINARY: 3" and now the screen wont turn on
Click to expand...
Click to collapse
Check this thread:
Sw rev. Check fail. Device: 5, binary 3
Hi, I've got a Galaxy S6 G920F on Vodafone that I am trying to downgrade from 7.0 to 6 or 5 so that I can go through with an unlocking procedure but I keep getting the error message " SW REV. CHECK FAIL. DEVICE: 5, BINARY 3". Can anyone help?
forum.xda-developers.com
Seems that you have to flash another firmware version.
Hi Guys,
Device: Samsung Galaxy Note N7000
Power On: Stuck with popup "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Stock ROM: can't locate firmware for those BL, AP, CP, CSC files
Anyone can help? Appreciated.
Cheers