Cyanogenmod 13.0 for Young 2
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
-Everything I tested so far, Too lazy to write it down
Not working
-Not sure if there is anything broken report it with proper log
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg)
Download:Google Drive
MD5: 461450A0C64122CC6144161ED611B90E
gapps:http://opengapps.org/
Install gapps right after rom (dont exit recovery) and dont wipe cache/dalvink/data before going thru gapps setup
Based On Android 6.0.1 marshmallow
Changelog
02.08.2017.
-Initial release
Btw, I have no idea why am i doing this i just got bored of devices i usually work with (Note 2, S4,S6 edge S7 edge and now s8+ ) so i decided to try working on low end device for once, It was actually more fun than most of those new-ish high end devices enjoy, Also source code for kernel can be found on my github, Rest of the source will be up soon you might as well expect some surprises (7.1.2 anyone?)
Your Source is Not Update
Sent from my Samsung SM-G130H using XDA Labs
hadaddarajat said:
Your Source is Not Update
Sent from my Samsung SM-G130H using XDA Labs
Click to expand...
Click to collapse
Sur,plox read OP.
No Google Account Option..
which gaps should i Install? I am unable to add google account coz there is no any option to add google account.. Plz Help Me
Solved
pawnkdka said:
which gaps should i Install? I am unable to add google account coz there is no any option to add google account.. Plz Help Me
Click to expand...
Click to collapse
I think you should improve the English speaking.
Are you using the latest version of GApps or the old version ?
If using the old version immediately update to the latest version. And do not remove the Play Store, because if you delete the application then you will not be able to login google account.
Ivan_Meler said:
Cyanogenmod 13.0 for Young 2
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
-Everything I tested so far, Too lazy to write it down
Not working
-Not sure if there is anything broken report it with proper log
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg)
Download:Google Drive
MD5: 461450A0C64122CC6144161ED611B90E
gapps:http://opengapps.org/
Install gapps right after rom (dont exit recovery) and dont wipe cache/dalvink/data before going thru gapps setup
Based On Android 6.0.1 marshmallow
Changelog
02.08.2017.
-Initial release
Btw, I have no idea why am i doing this i just got bored of devices i usually work with (Note 2, S4,S6 edge S7 edge and now s8+ ) so i decided to try working on low end device for once, It was actually more fun than most of those new-ish high end devices enjoy, Also source code for kernel can be found on my github, Rest of the source will be up soon you might as well expect some surprises (7.1.2 anyone?)
Click to expand...
Click to collapse
Using this, absolutely love it. Any updates in the works or perhaps 7.0?
PERFECTLY WORKING on my little Samsung (SM-G130M). I downloaded your work, did some research and finally took courage and dared to install it. Everything happened surprisingly well. Thank you so much! :laugh:
PD: I uploaded some pictures on imgur but since i'm new here on XDA Forums i can not post outside links in this message. If someone needs to see that this ROM works on the G130M Single SIM version of the device, please send me a private message. Thanks
Post update: Few of months after i installed this ROM my phone passed away. I do not think that it's had something to do with this ROM particularly but since i'm still being a newbie here, if you have the same phone that i had last year and you wanna flash this on your phone please try to contact Ivan_Meler or someone who has a better understanding oh this kind of subjects than me. Good luck! (23/04/2020)
SM-G130HN?
Has anyone tried this on the SM-G130HN? I do not exactly know the differences between the two variants, but I assume, they can't be too different, right?
EDIT: Worked flawlessly, haven't experienced any negatives since flashing this ROM.
SGY1 versus SGY2
does it work on the original Samsung "Galaxy Y" model number " GT-S5360 " , Y for "Young" not just the "Young 2" ?
colloquially the "SGY1" in contrast to the SGY2.
s4goa said:
SGY1 versus SGY2
does it work on the original Samsung "Galaxy Y" model number " GT-S5360 " , Y for "Young" not just the "Young 2" ?
colloquially the "SGY1" in contrast to the SGY2.
Click to expand...
Click to collapse
no it doesn't , but you can try my CyanogenMod 12 themed rom for GT-S5360
Google drive link is broken, please update
Please fix the dead download link i need it
Please fix the dead download link i need it too. Or other download links possible?
Thanks!!!
carlos8 said:
Please fix the dead download link i need it too. Or other download links possible?
Thanks!!!
Click to expand...
Click to collapse
here is PAC-ROM Android 6:
Яндекс
Найдётся всё
disk.yandex.ru
install this after the rom:
Яндекс
Найдётся всё
disk.yandex.ru
notnoelchannel said:
here is PAC-ROM Android 6:
Яндекс
Найдётся всё
disk.yandex.ru
install this after the rom:
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Please I need clear Lineage 13 for SM-G130HN Galaxy Young 2, while
[ROM][7.1.2][UNOFFICIAL] LineageOS 14.1 for Samsung Galaxy Young 2 SM-G130H - from XDA can not boot on SM-G130HN, I can see only a green arch, again and again, and the proces is never ending. On disk.yandex.ru can I search files whithout registration? Many Thanks!!!
carlos8 said:
Please I need clear Lineage 13 for SM-G130HN Galaxy Young 2, while
[ROM][7.1.2][UNOFFICIAL] LineageOS 14.1 for Samsung Galaxy Young 2 SM-G130H - from XDA can not boot on SM-G130HN, I can see only a green arch, again and again, and the proces is never ending. On disk.yandex.ru can I search files whithout registration? Many Thanks!!!
Click to expand...
Click to collapse
You need to wipe system, data, cache, dalvik before flashing
notnoelchannel said:
You need to wipe system, data, cache, dalvik before flashing
Click to expand...
Click to collapse
I do that, but with same results. (green arch...) PAC-ROM do go, but go to slowly. For this reason I need clear Lineage at least 13, or another help for 14.1. Wipe not help. Can I have functioning link for download clear Lineage 13 ?
carlos8 said:
I do that, but with same results. (green arch...) PAC-ROM do go, but go to slowly. For this reason I need clear Lineage at least 13, or another help for 14.1. Wipe not help. Can I have functioning link for download clear Lineage 13 ?
Click to expand...
Click to collapse
I will search los 13 for your device soon!
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: http://d-h.st/users/dhacker29/?fld_id=27426 (use latest lpmr1 gapps)
Useful Links
Unofficial changelog
Picassowifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12.1 for PicassoWifi (Tab Pro 10.1), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Testing
Created 2015-04-18
Last Updated 2015-04-18
Reserved
hi crpalmer
rom installation ultra easy, ultra fast, really no problem
full gapps installation ultra easy, ultra fast, really no problem
it's really a pleasure, i know i'm not a hard user
to keep myself very happy i do a full wipes, and use "easy battery calibration", & a backup
& perhaps "Black Hole Debloating"
many thanks
regards
Can I get some help. I cant get it to install. I get an failed executing binary in zip. This is supposed to work with sm-t900 (Samsung Galaxy Tab 12.2) also?
Same question as above. I've got a Tab 12.2 and I'd like to install this.
Hi two boys
what is your recovery
i think this rom is dedicated to 520
regards
Hello
Does the 5.1 xposed work with the 12.1 build.?
hi boy
there is a specific 5.1 xposed zip (zip marked 5.1)
it's ok on myb 520
regards
Thank you. I just ask because on my phone it does not work with 5.1 and I flashed the 5.1 version. But good to know. Thank you
Ok I flashed the 19/4 build, 5.1 gapps and the 5.1 xposedmodul.. After setting up everything I installed the xposed installer, picked my modules and restarted.. Now I hang on bootlogo bootloop... Same as on my phone.. How to solve this?
This would be a good time to remind you all that I do not accept bug reports when running xposed. Xposed is a bad idea and the changes it make to a running system are never properly tested and vetted like proper changes to CyanogenMod.
Nice and smooth, had a problem with apex launcher after dirty flashing that was fixed after a clean install.
Thanks a lot crpalmer :good:
validatus said:
Hi two boys
what is your recovery
i think this rom is dedicated to 520
regards
Click to expand...
Click to collapse
I haven't rooted yet. I was waiting for awhile for Samsung to upgrade to 5.0, and I'm done waiting.
@crpalmer, do you know if this will work on a 12.2 tablet?
Stuck in TWRP
TWRP v2.8.6.0 won't finish install of the 4/18 nightly...stuck on "Patching system image unconditionally" and will still be there after 45 minutes or so. Trying clean flash (I try not to dirty flash if I don't have to), and no issues with CM 11 or 12 before this. Also, ADB sideload is not recognizing the tablet anymore, so no luck trying to sideload so far eitther. Any ideas? Thanks in advance everyone!
I think there is a Problem with the Nightlies. When looking to Jenkins I see the builds were successful yesterday and today, but there were no download or changelog provided. When looking to the console Output of the build there are some strange warnings about possible DNS spoofing at the end. Would be nice if you could take a look at this.
many thanks
regards
hello
i installed, i install all nightlies with each time the last twrp with no problem
i think it's a problem of wipes, dowloading, ..
regards
oh, sorry if you misunderstood me, the only cm12.1 nightly from 04/18 is working perfectly fine for me. i meant there is a Problem with building newer nightlies since then.
regards
What is the problem again with Google Services on cm-12.1-20150420-NIGHTLY-bacon ROM?
crisis_trustee said:
What is the problem again with Google Services on cm-12.1-20150420-NIGHTLY-bacon ROM?
Click to expand...
Click to collapse
You have to reflash gapps each nightly for the time being. They get wiped.
airtower said:
You have to reflash gapps each nightly for the time being. They get wiped.
Click to expand...
Click to collapse
What do you think it is normal?
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Announcing the MK71.1 release of MoKee Open Source Project finally come to Nubia Z11.
This is still a very stage of the build. It may be buggy.
0x00.
A full wipe is required flashing from any other's ROMs.
0x01.
A TWRP (https://www.androidfilehost.com/?w=files&flid=125093) is required for flashing ROMs. You may also need to update your radio firmwares with https://www.androidfilehost.com/?fid=457095661767140318 if you're upgrading from 6.0.1
0x02.
Since the camera driver on Nougat is broken on Nubia's outdated open-sourced kernel, this build is using a prebuilt kernel from the stock ROM, which means:
* No F2FS support - You may need to full format your partition back to EXT4 if you're using F2FS (remember to backup, or you'll lose ALL your data)
* Since I have no way to tweak the touchscreen driver in the close-sourced kernel, you may usually touch something near the edge of the screen by mistake when holding the phone
* No way to disable the touch keypad, so no virtual navigation bar
* No way to swipe the navigation keys as well
0x03.
These features are not included:
* Wechat fingerprint payment (do it really useful outside China?!)
* NeoVision camera (would be a standalone flashable ZIP soon)
* IR remote control (the same as above)
0x04.
Downloads:
* TWRP: https://www.androidfilehost.com/?w=files&flid=125093
* Radio upgrade: https://www.androidfilehost.com/?fid=457095661767140318
* ROM: https://download.mokeedev.com/?device=nx531j&type=nightly
Good job. Finally some ROM to "play with"? Is this based on the 7.1.1 Developer version?
Can i flash rom without unlocking bootloader? I try many times but not succeed
Sent from my NX531J using Tapatalk
Fantastic !!!!
Thanks for the awesome work bro. I am facing a problem. After upgrading the radio firmware (I flashed the zip) I have no network signal. I have a 64GB + 6GB black gold edition (INDIA). I tried restoring my nandroid but still No Signal. I would appreciate the help. Thanks in advance.
digitalpixel said:
Fantastic !!!!
Click to expand...
Click to collapse
Have you tried this Rom mate ? I mean Mokee 70.1 version ?
sialokhan said:
Thanks for the awesome work bro. I am facing a problem. After upgrading the radio firmware (I flashed the zip) I have no network signal. I have a 64GB + 6GB black gold edition (INDIA). I tried restoring my nandroid but still No Signal. I would appreciate the help. Thanks in advance.
Click to expand...
Click to collapse
Same problem here.
The only way that I got signal is with 6.0.1 based roms...
With android 7, no signal response... tried everything.
chenxingyu said:
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Announcing the MK71.1 release of MoKee Open Source Project finally come to Nubia Z11.
This is still a very stage of the build. It may be buggy.
0x00.
A full wipe is required flashing from any other's ROMs.
0x01.
A TWRP (https://www.androidfilehost.com/?w=files&flid=125093) is required for flashing ROMs. You may also need to update your radio firmwares with https://www.androidfilehost.com/?fid=457095661767140318 if you're upgrading from 6.0.1
0x02.
Since the camera driver on Nougat is broken on Nubia's outdated open-sourced kernel, this build is using a prebuilt kernel from the stock ROM, which means:
* No F2FS support - You may need to full format your partition back to EXT4 if you're using F2FS (remember to backup, or you'll lose ALL your data)
* Since I have no way to tweak the touchscreen driver in the close-sourced kernel, you may usually touch something near the edge of the screen by mistake when holding the phone
* No way to disable the touch keypad, so no virtual navigation bar
* No way to swipe the navigation keys as well
0x03.
These features are not included:
* Wechat fingerprint payment (do it really useful outside China?!)
* NeoVision camera (would be a standalone flashable ZIP soon)
* IR remote control (the same as above)
0x04.
Downloads:
* TWRP: https://www.androidfilehost.com/?w=files&flid=125093
* Radio upgrade: https://www.androidfilehost.com/?fid=457095661767140318
* ROM: https://download.mokeedev.com/?device=nx531j&type=nightly
Click to expand...
Click to collapse
--------------------------------------------------------------------------
Tried on 64GB + 6GB Black Gold version. gives "ERROR-7 - Wrong base firmware." After flashing your Radio Zip (upgrading radio firmware) it doesn't have any network signal. phone connects to the WiFi but doesn't connect to the cellular network.
There`s an error with Rom`s updater script file (ASSERTS). Can you please fix that ?
sialokhan said:
Have you tried this Rom mate ? I mean Mokee 70.1 version ?
Click to expand...
Click to collapse
Hi sialokhan,
tried one of the early nightly release and I had no problem at all, but now I'm stuck on "FBI WARNING - WRONG BASE FIRMWARE"
I tought maybe a problem related to the TWRP beacuse I'm using the old 3.0.2 with "Stalence Tool" instead of the 3.0.3 from XingRz ( aka chenxingyu ) also the link from the mokee website.
I've to try as soon as possible ....
Best Regards
digitalpixel said:
Hi sialokhan,
tried one of the early nightly release and I had no problem at all, but now I'm stuck on "FBI WARNING - WRONG BASE FIRMWARE"
I tought maybe a problem related to the TWRP beacuse I'm using the old 3.0.2 with "Stalence Tool" instead of the 3.0.3 from XingRz ( aka chenxingyu ) also the link from the mokee website.
I've to try as soon as possible ....
Best Regards
Click to expand...
Click to collapse
It's not recovery related since I have tried both the recoveries. It's a Rom issue. Anyway I'm using official Resurrection remix and its freaking awesome.
sialokhan said:
It's not recovery related since I have tried both the recoveries. It's a Rom issue. Anyway I'm using official Resurrection remix and its freaking awesome.
Click to expand...
Click to collapse
Hi sialokhan,
ok I found the problem
you have to remove from the file "updater-script" ( <Mokee ROM file>\META-INF\com\google\android ) lines from 3rd to 11th:
ifelse(!(nubia.verify_trustzone("TZ.BF.4.0.1-00315") == "1"),
ui_print("***************************************");
ui_print("* *");
ui_print("* !!!!! FBI WARNING !!!!! *");
ui_print("* *");
ui_print("* !!!!! Wrong base firmware !!!!! *");
ui_print("* *");
ui_print("***************************************");
abort());
put the file back in the right dir and install
Let me know and Best Regards
P.s: I'm gonna install RR official Nougat thanks for the advice , many time I hoped the official RR can land on my Z11 Nubia 6/64 and now it's real
I really love it on my Nexus 7 ( grouper ) :good: .. some problem with the OTA updates ???
Hi, after trying RR (it is soooo laggy...) i give mokee a try. Mokee is so fast an complete different to RR. At the moment i am happy with MK7.1.
Yesterday i tried to install the latest nightly MK71.2-nx531j-201704160728-NIGHTLY.zip . But after installation i had no signal because the setup installs a chinese baseband. So i reverted to 7.1.1.
Where can i check, which baseband is included?
digitalpixel said:
Hi sialokhan,
ok I found the problem
you have to remove from the file "updater-script" ( <Mokee ROM file>\META-INF\com\google\android ) lines from 3rd to 11th:
ifelse(!(nubia.verify_trustzone("TZ.BF.4.0.1-00315") == "1"),
ui_print("***************************************");
ui_print("* *");
ui_print("* !!!!! FBI WARNING !!!!! *");
ui_print("* *");
ui_print("* !!!!! Wrong base firmware !!!!! *");
ui_print("* *");
ui_print("***************************************");
abort());
put the file back in the right dir and install
Let me know and Best Regards
P.s: I'm gonna install RR official Nougat thanks for the advice , many time I hoped the official RR can land on my Z11 Nubia 6/64 and now it's real
I really love it on my Nexus 7 ( grouper ) :good: .. some problem with the OTA updates ???
Click to expand...
Click to collapse
Thanks mate. I have found out the problem and its kinda not possible for me to unzip-edit-zip every time I update so I switched to RR and absolutely love it however even RR bricked my phone due to some magisk issue which apparently affects only locked boot loader devices only. Awesome folks at forum.gizchina.it helped me with edited file and its working like a charm.
sialokhan said:
Thanks mate. I have found out the problem and its kinda not possible for me to unzip-edit-zip every time I update so I switched to RR and absolutely love it however even RR bricked my phone due to some magisk issue which apparently affects only locked boot loader devices only. Awesome folks at forum.gizchina.it helped me with edited file and its working like a charm.
Click to expand...
Click to collapse
?
Sent from my NX531J using Tapatalk
@chenxingyu
is it possible, to include the SuperScreenshot App from stock ROM? It can be used with fingerprintsensor and the editor for screenshots ist very useful.
guys do i have to unlock bootloader for this ?
jirik152 said:
guys do i have to unlock bootloader for this ?
Click to expand...
Click to collapse
nope
So ive flashed the system after that radio and then gapps and still no network..
fridgeS3 said:
@chenxingyu
is it possible, to include the SuperScreenshot App from stock ROM? It can be used with fingerprintsensor and the editor for screenshots ist very useful.
Click to expand...
Click to collapse
Not planning to include any unnecessary apps from stock ROM.
Presenting First lineage OS for MT6757 Based Phone Infinix-X603.
Note:-This is unofficial Lineage OS rom and currently in alpha stage of testings. If any Dev want to help us pls commits on git hub source.
Developed By me @lalitjoshi06 & @majorkid
Join Telegram group for further development : https://telegram.me/infinixzero5
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Warning
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS.
Working:
1. wifi
2. fingerprint
3.. FM
4. Audio
5. Video
6. BT Fixed on 18.04.2018
7. Camera & flashlight Fixed on 02.05.2018
8. Ril (only working in 3g and 2g mode for outgoing)
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s) under testing will upload soon
Install a compatible Recovery TWRP
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package
Reboot
Source code & Device Tree
1. https://github.com/lineageos
2. https://github.com/lalitjoshi06/android_device_infinix_x603
Credits:
1. @joe2k1 (for Tree Specially)
2. All dev who provides patches for MTK
Currently This rom is in Alpha stage of Testing with many Bugs.
So don't complaint till it being properly stable. only comment for fixes ; Thanks
keep up the Good work dude...
:good:
Thanks for it.....please fix those issues.and I will use this ROM...thanks for supporting our device
Why don't you go to v.15? Just my opinion.
useone07 said:
Why don't you go to v.15? Just my opinion.[/QUOTE
we don't have kernel sources to make it.
Click to expand...
Click to collapse
Hello guys, got a little problem, i'm just a beginner, and don't have any good knowledge, so i hope you'll be patient with me.
I did an advanced format in the TWRP, which mean everything got wiped, and now, i lost my HummingBird OS, can anyone help me ? ( Teamviewer/Discord ? )
Thanks, and i hope to get an answer ASAP
SuppyAS said:
Hello guys, got a little problem, i'm just a beginner, and don't have any good knowledge, so i hope you'll be patient with me.
I did an advanced format in the TWRP, which mean everything got wiped, and now, i lost my HummingBird OS, can anyone help me ? ( Teamviewer/Discord ? )
Thanks, and i hope to get an answer ASAP
Click to expand...
Click to collapse
Reflash stock rom via sp flash tool. join telegram group link at op u got more clarified way if getting problem.
Does "Ril (sim shows but No network)" mean, that there is no sim-card-connection possible (speech nor internet)? Otherwise I would give a Try, cause my device is buggy anyway!
ax_mf said:
Does "Ril (sim shows but No network)" mean, that there is no sim-card-connection possible (speech nor internet)? Otherwise I would give a Try, cause my device is buggy anyway!
Click to expand...
Click to collapse
if you a developer than take tree from github and try to make. sim work but only in 3g and only for outgoing calls and sms.
I am not doing any work on it currently.
Guys, you are wonderful.......You really saved my ass man. Keep it up!!!
Keep up the good work sir and I would like to help in my observation(s) to improve and debug the new CustomROM. Though, this is not a complaint! Below is my observation for now:
1)Any attempt to set up the Password, PIN or Pattern to lock the phone screen crashes and mess up the whole thing. After the crash, the pop up will come up that the "Settings has stopped" no matter how hard I tried.
You can take note of this for further necessary action(s) sir. Thanks!
OmodAbbey2018 said:
Keep up the good work sir and I would like to help in my observation(s) to improve and debug the new CustomROM. Though, this is not a complaint! Below is my observation for now:
1)Any attempt to set up the Password, PIN or Pattern to lock the phone screen crashes and mess up the whole thing. After the crash, the pop up will come up that the "Settings has stopped" no matter how hard I tried.
You can take note of this for further necessary action(s) sir. Thanks!
Click to expand...
Click to collapse
updated the last working zip which available.
further I am not working on it.
Is there internet even though it's 3G?
Invalid/damaged zip file.
lalitjoshi06 said:
updated the last working zip which available.
further I am not working on it.
Click to expand...
Click to collapse
File is corrupt, please reupload
Hi @lalitjoshi06
I see that you have updated your tree on the github, including using patches from my project. Do you have any success of RIL workin?
hyperion70 said:
Hi @lalitjoshi06
I see that you have updated your tree on the github, including using patches from my project. Do you have any success of RIL workin?
Click to expand...
Click to collapse
Not yet make only tree updated from ur patches. Will work on it as i got time and let u know about this. Currently working on another project.
And there is no tester we have, if i build all thing like testing and all i have to do myself, thats why i left this project. If i got time will do it.
BTW Thanks for UR support.
lalitjoshi06 said:
And there is no tester we have
Click to expand...
Click to collapse
I have an Infinix zero 5 pro and i could test if you want and tell me what to do.
Tavaro said:
I have an Infinix zero 5 pro and i could test if you want and tell me what to do.
Click to expand...
Click to collapse
Join telegram group will give u link download install take log and send will work on that
Please guide porting for Helio P25 MT6757CD (GOME U7).
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my beta build for our beloved hlte, hltechn, hltekor, hltetmo and h3gduoschn (N9002),
most things are working, enjoy.
When you have BitGapps installed, you have to reflash them after every update!
Spoiler: Links
TWRP
LineageOS AndroidFilehost
LineageOS Mega
crDroid AndroidFilehost
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Wifi
USB
Video playback (HW/SW)
OTA Updates
Tethering via USB, WIFI and Bluetooth
Sensors
RIL
GPS
Signature spoofing for MicroG
Spoiler: Whats not working
Screen recording, it will slow down the complete system, reboot to fix.
Audio in a phone call with a bluetooth headset
Some people reported, that they sometimes lost the internet connection, I can't confirm this
You tell me
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware and devices.
donate
Spoiler: Changelog
07.02.2022
15.02.2022
01.03.2022
16.03.2022
21.03.2022
02.04.2022
29.04.2022
29.06.2022
17.08.2022
03.10.2022
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][12.x][N9005][BETA] LineageOS 19.1 and crDroid 8.x, ROM for the Samsung Galaxy Note 3
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS, crDroid
Version Information
Status: Stable
Created 2022-02-02
Last Updated 2022-10-03
Let me be the first one to thank you again ( did this in 18.1 thread) for spending your time developing for this awesome device .
Can't wait to install it again and use it as a backup phone with a12.
Cheers
I'm using your rom for Galaxy Note 8.0. It's good news that you support this device.
Thank you! I'll wait for the stable version
Great. But could u upload some screenshots here?
Our device is really immortal
Nice work guys, just installed everything ok for now
Bel lavoro ragazzi, appena installato per adesso tutto ok
Update 07.02.2021:
Fixed RIL
Fixed GPS
Fixed deepsleep issue
Fixed many selinux denials and switched to enforcing
Made builds for hltechn, hltekor and hltetmo
I will push this via OTA and AFH.
It's a huge difference now , unlike previous build there is no more lag and stuttering , basically everything that was wrong is now fixed and enjoyable . There is no more UI glitches (black square) as well. This is definitely daily driver now
Congrats to the developer for this huge upgrade and awesome rom!!
Still testing installing apps will update my post if I find anything else
xxx-man-by said:
Great. But could u upload some screenshots here?
Our device is really immortal
Click to expand...
Click to collapse
Made a short video in the OP .
Hi,
So happy that I can install LineageOS 19 on my hlte.
Just a few questions:
-Will LineageOS 19 official version be available for Galaxy Note 3 ?
-Currently I have LineageOS 18.1 OFFICIAL. Do you think it's worth to install this ROM?
A.M.2.K.M said:
-Will LineageOS 19 official version be available for Galaxy Note 3 ?
Click to expand...
Click to collapse
You have to ask LineageOS for this, some one twittert to me that it won't be the case, but I can't confirm this.
A.M.2.K.M said:
Do you think it's worth to install this ROM?
Click to expand...
Click to collapse
Yes, but you simply could create a TWRP backup and test it by your own .
html6405 said:
You have to ask LineageOS for this, some one twittert to me that it won't be the case, but I can't confirm this.
Yes, but you simply could create a TWRP backup and test it by your own .
Click to expand...
Click to collapse
And as I said I have LineageOS 18.1 now, should I do full wipe too or it will be okay not to wipe?
A.M.2.K.M said:
And as I said I have LineageOS 18.1 now, should I do full wipe too or it will be okay not to wipe?
Click to expand...
Click to collapse
I would recommend to do at least a factory reset and wipe system!
OK, thanks
hi, better battery life than 18.0 ?
Scorpionea said:
Let me be the first one to thank you again ( did this in 18.1 thread) for spending your time developing for this awesome device .
Can't wait to install it again and use it as a backup phone with a12.
Cheers
Click to expand...
Click to collapse
Same here , thanks so much for your amazing development !!!!
bilatche said:
hi, better battery life than 18.0 ?
Click to expand...
Click to collapse
Thats hard to say for me, I've never used LOS18.1, just bought this device extra to bring Android 12 up (Because I got asked).
Maybe someone could report if it's better or not.
Thanks for the opportunity to continue to use our smartphone!
Build from 07.02 as for me, works well. What I found: navigating gestures does not work. It turns on, but does not work in fact
Mooore said:
Thanks for the opportunity to continue to use our smartphone!
Build from 07.02 as for me, works well. What I found: navigating gestures does not work. It turns on, but does not work in fact
Click to expand...
Click to collapse
Thats the same on all devices with disabled navbar, I will give you the opportunity to enable it completely soon.
@html6405
I've noticed low sound from speakers (when on max) ,could you increase sound volume a bit in next build or if u can share mixer path ( something like that).
Enjoying in this rom every day , cheers
Edit: about battery I think it's the same at least to me.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 20 for our Samsung Galaxy S3 (I9305).
This is a alpha build, also from the LineageOS side, there are typical functions still missing, so don't install it if you want a completely stable and completed ROM and don't report my already listet bugs!
Attention:
Sometimes it needs another reboot to find the sim card.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Random reboots
NFC
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
ROM direct link
I9305 ROM
ROM Mega
Spoiler: Changelog
26.01.2023
13.03.2023
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][13.x][I9305][ALPHA] LineageOS 20.0, ROM for the Samsung Galaxy S3 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Version Information
Status: Alpha
Created 2022-11-08
Last Updated 2023-03-13
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
kerryking1 said:
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
Click to expand...
Click to collapse
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
html6405 said:
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
Click to expand...
Click to collapse
Are you in the US?
kerryking1 said:
Are you in the US?
Click to expand...
Click to collapse
No, I'm in Europe...
Would it be possible to port if I tested it?
kerryking1 said:
Would it be possible to port if I tested it?
Click to expand...
Click to collapse
Not really, this would slow down the process too much.
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
rattesack3 said:
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
Click to expand...
Click to collapse
1.03 GB folder on MEGA
2 files
mega.nz
Thanks will give it a try soon! Everytime i thought there were device at eol, they last longer. Hopefully this isn' t true for the gt-i9305.
Can you give some instructions to build the Rom on my own?
Do you think I could just swap boards? The boards look the same.
rattesack3 said:
Can you give some instructions to build the Rom on my own?
Click to expand...
Click to collapse
Write me a PN and I will help you.
kerryking1 said:
Do you think I could just swap boards? The boards look the same.
Click to expand...
Click to collapse
I fear that the mainboard could not fit into the case, but idk, you could give it a try.
I asked a seller on ebay and they said it doesn't work.
Is porting to a different chipset like starting over on port?
kerryking1 said:
Is porting to a different chipset like starting over on port?
Click to expand...
Click to collapse
I would have to start from the last developement state.
But at first I would make the device tree's for A13 ready, fix the build (there could be many problems), make the kernel ready and so on...
There would be a lot of work todo.
Hello,
the volume of voice recordings (e.g. whatsapp or signal) has always been too low for me in Lineage OS. In order for my interlocutors to understand me properly, I always had to increase the volume by changing the mixer_paths.xml in /root/vendor/etc/. Here is the video:
Unfortunately this file does not exist in Lineage OS 20. Does anyone know how to increase the volume of voice recordings here?
I'm so grateful you have brought my N8000 and i9305 back to life!
My children are learning and playing on my N8000 tablet. I have donated for N8000.
I re-wiped and installed your latest on i9305
20.0-20221108-HTML6405-i9305.zip
MicroG
Disabled animations
Android UI is running fast!
I tested YouTube app. It works but drops some frames on 360p, and any higher quality levels it drops a lot of frames.
scrcpy working nicely (not used with YouTube of course)
I'm still testing etc. It looks like i9305 will be useful with your ROM
-------------
Regarding your 3.4 kernel for "S3" (probably i9300?)
@html6405
Downloads for : Samsung Galaxy S3 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Please excuse my ignorance about kernels on Samsung Android.
Kernel Q1. Can your 3.4 "S3" Kernel work on S3 LTE i9305?
No Q2: Would you be able to compile 3.4 kernel for i9305?
Yes Q2. If I install html6405_kernel_-e48ea6b54b22-m0-3.4.zip Must I also install boot_img_3.4.img
Yes Q3. In what order do I install the kernel zip and boot_img zip?
Update 26.01.2023:
Synced with latest LineageOS sources
Set swappiness back to 100
Fixed SamsungDoze
Update 13.03.2023:
Synced with LineageOS sources from February
Moved to faster ota server
Possible fix for gralloc crash