Hi friends here i am sharing my Bootlogo collection for Alcatel One Touch Pop C1. This Bootlogo can be used by other MTK users with 320x480 resolution based device.
Link:
Expired
Instructions to flash Bootlogo:
1) Place zip in SDCard
2) Reboot to recovery
3) Flash zip
4) Reboot
5) Done !
Don't forget to hit thanks button
Related
This is my first post in development forum so pls Correct me if i have done anything wrong
Successfully Ported Carliv Touch Recovery to Lava iris 405
This Recovery is Hard work of awesome dev @carliv
Based on CWM (6.0.4.4) with full touch support and touch buttons menu. It has all functionality of CWM Recovery with Aroma File Manager
support. (Thanks to SuperDroid-Bond )
=================================================================================================================
Instructions :
To scroll page down you have to swipe right, and for scroll page up to swipe left. Also swipe left for Go Back.
If u want More information visit the original thread here
http://forum.xda-developers.com/showthread.php?t=2471479
=================================================================================================================
Downloads :
https://www.dropbox.com/s/sxfeo7w9887indw/recovery.img
=================================================================================================================
Instructions :
1.Place the recovery.img in the root of sd card
2.install mobileuncle tools from playstore
3.select recovery update and select the one u placed in sdcard
4. confirm to flash and enjoy
5. To get aroma filemanager support Just Extract This to root of sdcard
https://www.dropbox.com/s/e0ctjh4z68e8jjx/clockworkmod.zip
========================================CREDITS AND THANKS ===================================
Without hard work of carliv this recovery wouldn't be possible so hit thanks to him .
Without SuperDroid-Bond there wonldn't be aromafile manager support to this recovery so hit thanks to him .
==============================================================================================
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
puduraja said:
Dear XOLO Q3000 Users,
I am porting today the AROMA based MIUI ROM for our device.
It is based on the rom of ZOPO-zp980 4.4.4 version. I just mode and copied some files from other ROMS and made it work for this devise.
It is just a copy and paste one and nothing is created by me.
I have added some more application.
Almost most of them are functioning.
Please down load the ROM from Google Drive in the url below:
url: https://drive.google.com/file/d/0Bz8Fgu4wkBnqOThCY25HcFpmWDA/edit?usp=sharing
Follow the following steps:
1. Download the ROM and put into a folder in your sd card and take it to your sdcard without extracting it
2. Go to CWM or touch recovery. I have incorporated the Carlive touch recovery 2.2 based on CWM 6.0.4.4 in the ROM itself and you will open the recovery in the same.
3. Carry out the wipe all after clicking wipe function before installing.
4. Select install zip and select the just download rom and flash it.
5. Please wait for some time and it will boot up in about a minute or 1.5 minute.
6. Enjoy.
Boots takes about 1.5 to 2 minutes. Carliv Touch recovery 2.2 based on CWM 6.0.4.4 is built in the ROM.
For any doubts and other problems write here.
Click to expand...
Click to collapse
thanks a lot
will give a try n let u know abt performance n any other things
Downloaded...Flashed...Bricked...Recovered.
Needed Files:-
• Rooted Micromax A104(How To Root)
• Mobile Uncle tool. (Here)
• Custom Recovery.(CWM / TWRP 2.8.7.0 / PHILZ / CTR 2.7 /STOCK).
• ZArchiver.(Here)
• Patience. Apk
Procedure:-
• Download all above files & Apks.(Not the patience.apk)..
• Extract the "recovery.img" From your downloaded "__ Recovery.zip".
• Place extracted " recovery.img" into the root of the file manager.
• Install Mobile Uncle Tool.
• Open it & Grant root permission.
• Then click on "Recovery update" Option.
• Now u can see a "recovery.img" file in your screen.
• Click on it & A pop-up appears it asked u to "R U sure Flash recovery !" ;Click on "OK".
• Wait until a new pop-up comes; When it comes it asked u to " Reboot into recovery" ; Click "OK".
• Bllloooommmmm. Ur phone booted into recovery mode.(If not booted then go to recovery by switch off your phone & Press "vol + & power button" at same time.).
Note:-
★ Do not extract/place recovery.img in your root of your sd-card.
★ Make sure that U'r device charged almost 60%(For safety).
Credits:-
@SuperDroid-BOND [For PHILZ recovery]
@Vishwa Gohil [For CTR]
@muklshakya123[For CWM]
@saginesht[For TWRP]
@Darkstar085(Me)[For STOCK recovery]
All Recovery
All photos of All Recovery's for fire 2
Youtube
YOUTUBE LINK
All Recovery img can't b downloaded as zip. They all are getting downloaded as apk files. Why?
Aamir Jawhar said:
All Recovery img can't b downloaded as zip. They all are getting downloaded as apk files. Why?
Click to expand...
Click to collapse
Link issue may b
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices.It provides a touch screen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Here i sharing all TWRP recoveries ported to Pop C1
TWRP 2.6.3.0:
https://mega.nz/#!fkcUEBYT!lTQZIslaNdzVYIZBkS099g3u260RwJh6WNuUjg77hs4
TWRP 2.8.2.0:
https://mega.nz/#!Tk8HzJAR!TH8J1ojMQ4leQyIm1kYjcGd2pu7tdwVgTqqe9PdYOCY
TWRP 3.0.0-0:
https://mega.nz/#!2hcGXLLK!s--fk3FmkV6BeCvUKrzTh8X6tnWYCts2XsVijHE9pHE
TWRP 3.0.2-1:
https://mega.nz/#!S5sEAaQB!OURmOAyHACH4fBxU1RcazLMXoj8nNDazNqtyYQsar6M
TWRP 3.1.0-0:
https://mega.nz/#!j9VhEJbR!1tqGktPi-5lIetpfRsSg_ymdMnA_Jdnx2Od1fU531ro
TWRP 3.1.1-0:
https://mega.nz/#!T4tUDDQL!QLmxJjLLqf6_BARGi__j04Ljt1TAz9wN8d_UI0QrHSs
Instruction to flash recovery:
Using Custom Recovery:
1) Download zip and paste it in SDCard
2) Reboot to recovery
3) Flash zip
4) Reboot recovery
Using Rashr
1) Download Rashr
2) Extract zip
3) Open Rashr
4) Goto to the folder where you extracted zip
5) Select recovery.img
6) Flash it
7) Reboot to recovery
Credits:
1) GETAKGT1
2) Team Win Team
3) Kirito9
4) Team Dev Pop
hmd_msrf_k said:
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices.It provides a touch screen-enabled interface that allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Here i sharing all TWRP recoveries ported to Pop C1
TWRP 2.6.3.0:
https://mega.nz/#!fkcUEBYT!lTQZIslaNdzVYIZBkS099g3u260RwJh6WNuUjg77hs4
TWRP 2.8.2.0:
https://mega.nz/#!Tk8HzJAR!TH8J1ojMQ4leQyIm1kYjcGd2pu7tdwVgTqqe9PdYOCY
TWRP 3.0.0-0:
https://mega.nz/#!2hcGXLLK!s--fk3FmkV6BeCvUKrzTh8X6tnWYCts2XsVijHE9pHE
TWRP 3.0.2-1:
https://mega.nz/#!S5sEAaQB!OURmOAyHACH4fBxU1RcazLMXoj8nNDazNqtyYQsar6M
TWRP 3.1.0-0:
https://mega.nz/#!j9VhEJbR!1tqGktPi-5lIetpfRsSg_ymdMnA_Jdnx2Od1fU531ro
TWRP 3.1.1-0:
https://mega.nz/#!T4tUDDQL!QLmxJjLLqf6_BARGi__j04Ljt1TAz9wN8d_UI0QrHSs
Instruction to flash recovery:
Using Custom Recovery:
1) Download zip and paste it in SDCard
2) Reboot to recovery
3) Flash zip
4) Reboot recovery
Using Rashr
1) Download Rashr
2) Extract zip
3) Open Rashr
4) Goto to the folder where you extracted zip
5) Select recovery.img
6) Flash it
7) Reboot to recovery
Credits:
1) GETAKGT1
2) Team Win Team
3) Kirito9
4) Team Dev Pop
Click to expand...
Click to collapse
Where can I find TWRP 3.1.1-0 for this model, the links are broken
silhouette said:
Where can I find TWRP 3.1.1-0 for this model, the links are broken
Click to expand...
Click to collapse
Hello, it's nice to see you guys still using Pop C1 after all these years.
Here you go:
File on MEGA
mega.nz
Good luck
hmd_msrf_k said:
Hello, it's nice to see you guys still using Pop C1 after all these years.
Here you go:
File on MEGA
mega.nz
Good luck
Click to expand...
Click to collapse
Thanks, I did not think I'd get a reply. While on the topic, can someone suggest the best custom rom with the fewest bugs. About using c1 rom after all these years, it really is for a customer who has a whole lot and needs a higher android version so the newer apps work. FB Team Dev Pop has also been really helpful finding recoveries and roms, tough a lot of the old links are broken as you would expect
Hello friends. Here i am sharing my Bootanimation collection for Alcatel One Touch Pop C1. This Bootanimation also can be used in other 320x480 resolution based phone
Link:
https://www.androidfilehost.com/?w=files&flid=138042
Instruction to flash Bootanimation:
1) Place Zip in SDCard
2) Reboot to recovery
3) Flash zip
4) Reboot
5) Done !
Don't forget hit thanks button