Update Root device - Honor 6X Questions & Answers

Hi
My Honor 6x is rooted with magikmask bootloader unlock and TWRP.
Actualy build BLN-L21C432B151 I want to update to BLN-L21C432B360 but I don't know how to do
Can some one help me please

do you ever received update from updater app

The OTA say's me to update if that's your question

then update dude .. after update your root will be removed , root again

Ok. Want to be sure when I was looking on internet some people said it's imposible to update with a bootloader unlock
I'll update and root again Thank's
just one other think if I update will I need to re unlock bootloader and TWRP ?

Deecy said:
Ok. Want to be sure when I was looking on internet some people said it's imposible to update with a bootloader unlock
I'll update and root again Thank's
just one other think if I update will I need to re unlock bootloader and TWRP ?
Click to expand...
Click to collapse
some times the bootloadet will lock after big updates so better to backup your data and then relock again and flash twrp

Deecy said:
Ok. Want to be sure when I was looking on internet some people said it's imposible to update with a bootloader unlock
I'll update and root again Thank's
just one other think if I update will I need to re unlock bootloader and TWRP ?
Click to expand...
Click to collapse
Did you manage to update your system? I tried everything, always getting an error that the update can't get verified.
I have a rooted, unlocked twrp system on android 7.0 EUMI 5.0 (BLN-L21,Honor 6x)
already tried to flash stock recovery, remove magisk(root), busybox but I still can't update the system.
I would really appreciate the help.

Try dload method with latest furmware

narshi shukla said:
Try dload method with latest furmware
Click to expand...
Click to collapse
That will also work.

citizenserious said:
Did you manage to update your system? I tried everything, always getting an error that the update can't get verified.
I have a rooted, unlocked twrp system on android 7.0 EUMI 5.0 (BLN-L21,Honor 6x)
already tried to flash stock recovery, remove magisk(root), busybox but I still can't update the system.
I would really appreciate the help.
Click to expand...
Click to collapse
You can do via dload only. Earlier i uswd to update just by flashing the stock recovery but recently on 6X this messed up badly may be volte and hence update failed and then it gave me to download the full firmware with prompt as your data partition is messed up amd needs to be fixed and after downloading the fill OTA update, got success. But then proceeded with debranding the next night

shashank1320 said:
You can do via dload only. Earlier i uswd to update just by flashing the stock recovery but recently on 6X this messed up badly may be volte and hence update failed and then it gave me to download the full firmware with prompt as your data partition is messed up amd needs to be fixed and after downloading the fill OTA update, got success. But then proceeded with debranding the next night
Click to expand...
Click to collapse
Hey brother, i tried many times to update from B360 to B365 (not full package, only 547MB) reflashing stock B360 recovery, but i always receive errors while recovery is verifying the package. I tried even dload method with .zip archives but i always achieve a failure and it is just boooooring :silly: You know other methods to try? Like adb or terminal emulator commands to update, or else... I cannot figure out how to correctly update my device. I have both B365 packages, FULL or partial OTA update downloaded. Thanks in advance

RedSkull23 said:
Hey brother, i tried many times to update from B360 to B365 (not full package, only 547MB) reflashing stock B360 recovery, but i always receive errors while recovery is verifying the package. I tried even dload method with .zip archives but i always achieve a failure and it is just boooooring :silly: You know other methods to try? Like adb or terminal emulator commands to update, or else... I cannot figure out how to correctly update my device. I have both B365 packages, FULL or partial OTA update downloaded. Thanks in advance
Click to expand...
Click to collapse
Cant believe you are facing issues now who helps every new user.
Nope bro. I still recommend to use dload only to flash full firmware. It should be full firmware and not the 547 MB.
Just to be in stock and use one of the app today, I relocked bootloader but then got the prompt as my data partition is damaged and need format. I allowed and then it was only erecovery and bootloader.
Then i unlocked and it went straight to twrp. And from there reboot to system works fine. I have the files and once really needed i will dload but problem with stock is that it doesn't have in-built call recording.
Edit-What is exact firmware BLN-L21CXYZB365?

shashank1320 said:
Nope bro. I still recommend to use dload only to flash full firmware. It should be full firmware and not the 547 MB.
Just to be in stock and use one of the app today, I relocked bootloader but then got the prompt as my data partition is damaged and need format. I allowed and then it was only erecovery and bootloader.
Then i unlocked and it went straight to twrp. And from there reboot to system works fine. I have the files and once really needed i will dload but problem with stock is that it doesn't have in-built call recording.
Edit-What is exact firmware BLN-L21CXYZB365?
Click to expand...
Click to collapse
Well let's say that looks like it's my turn now; Huawei mechanisms are much complicated sometimes, a little detail can let you puzzle an hour like and maybe it's only a joke. My previous device was a Samsung, so except common Android related functions EMUI is a new world for me. Only full firmware will work so, ok. Do i have to reinstall every app, or modify again my whole settings menu if i update using the full firmware package, i suppose..? What do you mean with "use one of the app today"? I didn't relocked bootloader because i thought that stock recovery could be enough. Overall, the risk to encounter an error like yours would be a bore, generally. Which files are you referring to, update files? My full build number is BLN-L21C432B360, I'm trying to update to B365.
However if you need call recording function (me too), there's a working method posted by an user in this thread https://forum.xda-developers.com/honor-6x/themes/callrecord-t3650864 that enables official call recording function from EMUI, check it. I followed this months ago on my BLN-L21, who had no call record at all by default in my firmware, and it flawlessly worked. I recommend it to you.

RedSkull23 said:
. Do i have to reinstall every app, or modify again my whole settings menu if i update using the full firmware package, i suppose..? What do you mean with "use one of the app today"?
I didn't relocked bootloader because i thought that stock recovery could be enough. Overall, the risk to encounter an error like yours would be a bore, generally. Which files are you referring to, update files? My full build number is BLN-L21C432B360, I'm trying to update to B365.
However if you need call recording function (me too), there's a working method posted by an user in this thread https://forum.xda-developers.com/honor-6x/themes/callrecord-t3650864 that enables official call recording function from EMUI, check it. I followed this months ago on my BLN-L21, who had no call record at all by default in my firmware, and it flawlessly worked. I recommend it to you.
Click to expand...
Click to collapse
I was using Tez app from play store but it didnt work may be because i am rooted with unlocked bootloader and need to bypass the safety check.
For call recording, I am already usimg a zip since debranding and works fine. I have Posted in 5C repository. But we need to be rooted for this with custom recovery.
If you are rooted then can take twrp backup and restore apps if on stock and non rooted then hisuite.
As far as i have tested on my 5c, dload won't wipe data but still i would recommend to have full backup brother.
---------- Post added at 11:31 AM ---------- Previous post was at 11:16 AM ----------
RedSkull23 said:
Only full firmware will work so, ok. Do i have to reinstall every app, or modify again my whole settings menu if i update using the full firmware package, i suppose..? What do you mean with "use one of the app today"? I didn't relocked bootloader because i thought that stock recovery could be enough. Overall, the risk to encounter an error like yours would be a bore, generally. Which files are you referring to, update files? My full build number is BLN-L21C432B360, I'm trying to update to B365.
.
Click to expand...
Click to collapse
BLN-L21C432B365 full firmware-
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v93141/f1/full/update.zip

shashank1320 said:
As far as i have tested on my 5c, dload won't wipe data but still i would recommend to have full backup brother.
---------- Post added at 11:31 AM ---------- Previous post was at 11:16 AM ----------
BLN-L21C432B365 full firmware-
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v93141/f1/full/update.zip
Click to expand...
Click to collapse
Surely I'll take a backup pal, i already got burned time ago and now i never do something without doing a nandroid backup bfore Thanks for the link, but i already have the FULL package downloaded OTA stored on my PC, so as suggested even by another user today I'll try again dload method but with full package other than partial one, it shouldn't erase my data and even if it should, I'll have a system image.
Only one thing now; in the folder where OTA was saved on my phone, as habit i found 3 packages; update.zip, update_data_public.zip and update_BLN-L21_hw_eu.zip. In this case, in dload folder on my phone i have to extract all the zips or only the main update.zip and leave the other two zipped?

RedSkull23 said:
Surely I'll take a backup pal, i already got burned time ago and now i never doing something without a nandroid backup bfore Thanks for the link, but i already have the FULL package downloaded OTA stored on my PC, so as suggested even by another user today I'll try again dload method but with full package other than partial one, it shouldn't erase my data and even if it should, I'll have a system image.
Only one thing now; in the folder where OTA was saved on my phone, as habit i found 3 packages; update.zip, update_data_public.zip and update_BLN-L21_hw_eu.zip. In this case, in dload folder on my phone i have to extract all the zips or only the main update.zip and leave the other two zipped?
Click to expand...
Click to collapse
Extract and use only main update.zip, put all files in dload and it will do.
Have backup but I just tested and flashed full B340 again on my phone and no data loss.

shashank1320 said:
Extract and use only main update.zip, put all files in dload and it will do.
Have backup but I just tested and flashed full B340 again on my phone and no data loss.
Click to expand...
Click to collapse
Thanks for the tip brother!

So this evening i tried to use only the extracted files from the main update.zip in dload folder; then, via ProjectMenu, i choose software upgrade and loaded the update after reflashing stock recovery for B360, that i took from your repository thread, since that time ago i didn't made a copy of my stock recovery before flashing TWRP. What i obtained was a soft-brick, i really don't know why on earth because usually it just fails at 5% while verifying the package and stop, it reboots to system... so i flashed again TWRP from fastboot and now i'm restoring my backup made today.
Crap, Huawei just CAN'T make things like updating OTA such difficult! I uninstalled Magisk before doing that, but i think that it fails because i miss a clean stock boot.img. Anyway WTF all these steps for an OTA is foolish.

I provided a guide how I managed to update my rooted device and keep all my stuff, settings and apps and reroot.
Just take a look here:
https://forum.xda-developers.com/ho...rootet-h6x-t3684758/post74102863#post74102863
I already did two successful updates with this method.
If there is a question just ask in that forum.

RedSkull23 said:
So this evening i tried to use only the extracted files from the main update.zip in dload folder; then, via ProjectMenu, i choose software upgrade and loaded the update after reflashing stock recovery for B360, that i took from your repository thread, since that time ago i didn't made a copy of my stock recovery before flashing TWRP. What i obtained was a soft-brick, i really don't know why on earth because usually it just fails at 5% while verifying the package and stop, it reboots to system... so i flashed again TWRP from fastboot and now i'm restoring my backup made today.
Crap, Huawei just CAN'T make things like updating OTA such difficult! I uninstalled Magisk before doing that, but i think that it fails because i miss a clean stock boot.img. Anyway WTF all these steps for an OTA is foolish.
Click to expand...
Click to collapse
Sorry to hear you that bro.
I myself flashed the same firmware yesterday to test this without backup (hisuite backup taken on 7th). I did via dload the same firmware and it was successful without any data loss, but yeah, I lost root, call recording feature that I flashed 20 days back.
I was planning to return to full stock because I know OTA will mess up if received on this state.
Not sure what went wrong buddy with your case. If it is due to any of the file in repository, I apologise for it.

Related

[HELP] HTC on e8sd MM update install ERROR

hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic
Might be due to bad zip file! Download the update again and try!
Kianush said:
hey guys, yesterdy I got a notification for android 6.0 upgrade and it was a ~100mb file for preparation so i downloaded it and charged my battery and tapped to install it, it reboots and wants to start installing but then goes to recovery menu and gives an error
the phone is all stock, no root or bl unlock or anything
I attached the error msg below:
it's m8sd not e8sd, mistyped in topic
Click to expand...
Click to collapse
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.
generalugh28 said:
I had a similar error as yours doing exactly the same thing but mine was a e8sw running LP5 Sense6 rooted stock with xposed.
Even when I uninstalled xposed and disabled supersu, I still could not install the upgrade.
Finally managed to get the upgrade by going all the way back to stock and allow the OTA updates all the way up the MM6 update. Took me nearly 2 days to do that.
I have taken clean twrp backups of all the stock updates and will try and post them here soon.
Click to expand...
Click to collapse
thank you for the information, but as I mentioned in op my phone is already all stock, I havent ever moded or rooted or anything, it's stock locked bootloader
Have the exact same issue. My device is compelitely stock. Tried flashing the recovery from the downloaded OTA but still got the sama error. Hopefully someone will be able to resolve the issue.
if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.
@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.
sam5154 said:
if you have problems in installing OTA updates, follow these steps
1. check if your CID and MID are matching each other. they should be both for same region. mine are for vietnam. mec_dugl / HTC__057
2.Flash an stock RUU from http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
3.Skip all registeration process and directly go to update menu.
4.this is a 3 stage update process: a small update for some applications/another 100 MB update for making device ready for main update!! / at last 1 GB main update . each one should be downloaded and installed separately.
5. after downloading 100MB update, DO NOT restart. coneect your phone to PC and go to download folder on phone internal memory, there should be a zip file containing updates(sadly I forgot file name), copy it on your PC and extract recovery.img from it.
6. boot your phone into bootloader and flash stock recovery you've extracted using fastboot.
7. now you have complete stock ROM. go to setting/update again and follow update process.
8.after updating you may flash twrp and supersu.
9. I don't know why, but there is a good chance that after messing with system files in MM you get stuck in several kinds of bootloops and soft-breaks. Don't worry; all you should do is going to recovery and wiping caches. sometimes you need a factory reset too. also have in mind that a complete boot after changing system files may take up to 15 minutes even without wipes.
Click to expand...
Click to collapse
Hi, thanks for this. I will try this once i got home.
But i have one questions, mine is Vietnam MEC_DUGL with stock lollipop 5.0.2. The RUU only available for stock lollipop 5.0.1. Can I use this RUU or should I look for specific RUU for lollipop 5.02?
Thanks!
Kianush said:
@sam5154 well thank you for the info, Im gonna try these steps except, I will try to download again and flash recovery and try it before flashing a RUU and lose everything
but I hope it works anyway, btw mine is also vietnam region.
Click to expand...
Click to collapse
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Have you tried the suggestion above? Let me know the result! Thanks man
sam5154 said:
If you gonaa try that, then remeber to unroot and uninstall xposed, and you can use titanium backup for restoring your apps and data of course.
Click to expand...
Click to collapse
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??
Kianush said:
in op I already told that I dont have root or anything and the phone is all stock and it was like this from the begining, that means no xposed or anything else
Click to expand...
Click to collapse
Kianush said:
and how to check for this mec_dugl / HTC__057?
the first part is ok it shows that in booloader menu, but how to check for HTC__057??
Click to expand...
Click to collapse
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html
bataskhayal said:
Here you go :
If you want more information, use ADB (if you don't how to get it going, use the search on the forum or Google about it).
While you phone is connected to your PC, type adb reboot bootloader and wait for your phone to reboot into bootloader mode. Once there, you can perform fastboot commands like getvar. Type fastboot getvar all and you will see all the information about the phone, including the product variable which lists the model you have.
Source : http://forums.androidcentral.com/htc-one-m7/320871-how-check-htc-one-variant-model.html
Click to expand...
Click to collapse
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Yes bos, i also did the recovery trick but still cant make it work. So the only solution we havent try is to flash RUU which i doubt also will make it work since my phone also factory stock. So i guess will stay in 5.0.2 for a while.
Kianush said:
Thank you for the info
btw I did go through the steps of downloading the 110mb update and flashing its recovery before pressing install and that didnt work and still gives OP error
so I guess I have to use RUU but not gonna do that for a while and also Im not so sure it'll work because the phone is already factory stock!
Click to expand...
Click to collapse
Hi, I have managed to finally update my Vietnam HTC One E8 dual SIM (MEC_DUGL) to Android 6.0. The problem that cause the error is the error recovery file, hence I re-install the RUU to get the correct recovery.img file. Below are the steps :
Note : Try with your own risk
1. My device is currently stock 5.0.2 no root and locked. Before starting the update process please make sure to backup all of your important data. Im using the stock HTC backup software, when you restore your device after you finished your update process, it will re-install your currently installed apps , contacts, settings, etc.
2. Download RUU for your device here : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
I downloaded :
[Vietnam][DUAL][M8sd][mec_dugl][CID HTC__059][OPAJ20000] :
[Lollipop 5.0.1][2.35.425.2] : LINK
Seems not match with my current software (5.0.2), but eventually it will do the magic.
3. Flash RUU. NOTE : You will lose all of your data in your internal phone memory. Make sure to backup all of your important files.
Steps:
1) Download RUU.
2) Rename RUU to 0PAJIMG.zip (the first character is a zero, NOT A LETTER O)
3) Put renamed 0PAJIMG.zip on your external_SD
4) Boot into your bootloader and make sure your in hboot and let it update its RUU.
5) No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed RUU file to external_sd
6) After you have updated your RUU, make sure to remove the 0PAJIMG.zip from your external_sd because it will ask to update your RUU everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing RUU again).
7) Done!
Source : http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
4. Reboot your phone, now your phone is back to factory stock, connect it to wifi, no need to set up any account, just go directly to software update from Settings > About > Software Updates. Just install all the available software updates (5.0.2 > 6.0 part 1 > 6.0 part 2).
5. BOOM! Your HTC One E8 now runs Android 6.0.1 Marshmallow.
6. Restore your phone from the stock HTC Backup Software.
7. Done

6.0.1 ota with stock rooted 6.0

My v10 downloaded an OTA , which im assuming is 6.0
1. Im rooted on stock 6.0 and unlocked boot loader. Will the OTA work without messing up anything ? Ill have to root again im sure, just want some info before i pull the trigger.
I don't think the update will even proceed being that you're on a rooted ROM. I have that notification too, and i just don't know how to turn it off.
I to am rooted,unlockboot and stock rom. I don't feel like taking a chance. So I used titanium backup to freeze the software update and in the drop down notification if you press it, it's a notification from Google play services if you block it in apps it will disappear from your drop down. I also deleted the update zip in the cache folder.I used es file explorer ,device/cache/update
popwar said:
My v10 downloaded an OTA , which im assuming is 6.0
1. Im rooted on stock 6.0 and unlocked boot loader. Will the OTA work without messing up anything ? Ill have to root again im sure, just want some info before i pull the trigger.
Click to expand...
Click to collapse
Okay, I'm assuming you are on H90120e (system version). There is a root exploit for the H90120j update. You just do the following:
Make a backup of your apps and settings
Flash your phone to the new update (H90120j)?
Take a look at either one of these threads to root your device again:
http://forum.xda-developers.com/tmobile-lg-v10/general/step-step-guide-rooting-lg-v10-using-t3382631
OR
http://forum.xda-developers.com/tmobile-lg-v10/general/root-android-6-0-h901-t3382819
You can't flash the phone that is already rooted and has TWRP.
I am in this same situation. On stock rom with root and twrp. I want to update to the new update, but do not want to loose all my apps, settings, etc.
Question is, how to do the initial update before having to re-root again?
How do we flash the phone with the new update?
bhagiratha said:
You can't flash the phone that is already rooted and has TWRP.
I am in this same situation. On stock rom with root and twrp. I want to update to the new update, but do not want to loose all my apps, settings, etc.
Question is, how to do the initial update before having to re-root again?
How do we flash the phone with the new update?
Click to expand...
Click to collapse
Why can't you flash the phone that is already rooted and has TWRP?
All you are doing is opening the LGUP tool and flashing the new H90120j .kdz file using the "refurbish" option then flashing the H90120j .tot file that has TWRP using the "update" option which will flash the phone regardless of what is running on your phone. The guides on the first link explain that. I believe your concern is keeping all of your settings and apps. Look up Titanium backup, it works for me.
Thank you. I only flash the LGH901AT-01-V20j-310-260-JUL-12-2016-ARB02+0ROOTTWRP tot file and all is good.
Well except that I lost Dolby audio.
I will look for a fix.
jun19inf said:
Okay, I'm assuming you are on H90120e (system version). There is a root exploit for the H90120j update. You just do the following:
Make a backup of your apps and settings
Flash your phone to the new update (H90120j)?
Take a look at either one of these threads to root your device again:
http://forum.xda-developers.com/tmobile-lg-v10/general/step-step-guide-rooting-lg-v10-using-t3382631
OR
http://forum.xda-developers.com/tmobile-lg-v10/general/root-android-6-0-h901-t3382819
Click to expand...
Click to collapse
Hi,
Do I have to use LGUP to install the update or can I click install on the dropdown of my phone?
I'm on stock MM 6.0 (H90120e) Rooted and I will not have access to my main PC for another week as I'm traveling.
Thanks,
-NJ
Anyone?
bhagiratha said:
You can't flash the phone that is already rooted and has TWRP.
I am in this same situation. On stock rom with root and twrp. I want to update to the new update, but do not want to loose all my apps, settings, etc.
Question is, how to do the initial update before having to re-root again?
How do we flash the phone with the new update?
Click to expand...
Click to collapse
There's a guide in general that tells how to do all this. In fact jun19inf WROTE it.
In a nutshell, do a twrp backup.
Upgrade to 20j by flashing the stock 20j kbz.
Enable usb debugging and oem unlock
flash tot that has twrp in it.
Now you can go into twrp and 1) root via supersu 2) restore ONLY data from your twrp backup taken previously to get your apps etc back. Alternatively Titanium Backup will also do just fine.
njdevils28 said:
Hi,
Do I have to use LGUP to install the update or can I click install on the dropdown of my phone?
I'm on stock MM 6.0 (H90120e) Rooted and I will not have access to my main PC for another week as I'm traveling.
Thanks,
-NJ
Click to expand...
Click to collapse
If all is you have is root, you should be able to unroot in the SuperSU settings, and then let the update install. But if you have TWRP, then I can't see any way to do the update without using a PC to flash your phone back to stock ROM and recovery. Although you may check the dev. section to see if Eliminator has a flashable ROM to bring you up to date.
Sent from my LG-H901 using XDA-Developers mobile app
YrrchSebor said:
If all is you have is root, you should be able to unroot in the SuperSU settings, and then let the update install. But if you have TWRP, then I can't see any way to do the update without using a PC to flash your phone back to stock ROM and recovery. Although you may check the dev. section to see if Eliminator has a flashable ROM to bring you up to date.
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
Ah. Thank you very much!
-NJ
Hi all. I just got my factory warranty back and I attempted to root it. Everything went as it should, until just after the install finished. Instead of rebooting normally, it now will only reboot into TWRP. Once there, when I try to flash a custom ROM (in this case, Bliss, but I don't think it matters, I get an error message that says the zip file is corrupt. Then, while still in recovery, when I tried to wipe everything except the sd card, it says mkfs.fat process ended with error. I then powered down and attempted the factory reset. I scrolled down on both screens and it did not say anything about any errors, so I assumed it took. However, it reboots right back into TWRP recovery. It also boots right to TWRP recovery when I try to boot normally. Of course, adb does not recognize the phone in any mode that I can get into (fastboot/recovery/download), so, I can't use LG Bridge to reflash the original firmware. Does anybody have any ideas for a fix? I know that this replacement phone had 6.0 on it. I thought I did everything to a t? TIA...
OK, not sure how I got there, but when I attempt to reboot from TWRP it says No OS Installed! Are you sure you want to reboot? That at least says what the problem is. Does anybody know how to fix this?
Where can I download the update file?
wbexpress said:
Hi all. I just got my factory warranty back and I attempted to root it. Everything went as it should, until just after the install finished. Instead of rebooting normally, it now will only reboot into TWRP. Once there, when I try to flash a custom ROM (in this case, Bliss, but I don't think it matters, I get an error message that says the zip file is corrupt. Then, while still in recovery, when I tried to wipe everything except the sd card, it says mkfs.fat process ended with error. I then powered down and attempted the factory reset. I scrolled down on both screens and it did not say anything about any errors, so I assumed it took. However, it reboots right back into TWRP recovery. It also boots right to TWRP recovery when I try to boot normally. Of course, adb does not recognize the phone in any mode that I can get into (fastboot/recovery/download), so, I can't use LG Bridge to reflash the original firmware. Does anybody have any ideas for a fix? I know that this replacement phone had 6.0 on it. I thought I did everything to a t? TIA...
OK, not sure how I got there, but when I attempt to reboot from TWRP it says No OS Installed! Are you sure you want to reboot? That at least says what the problem is. Does anybody know how to fix this?
Click to expand...
Click to collapse
Did you select refurbish or upgrade?
I believe you need to select upgrade when flashing or you get stuck in TWRP
Sent from my LG-H901 using XDA-Developers mobile app
How to root V10 T-mobile M.M ver V20L
How to root V10 T-mobile M.M ver V20L
Can some one guide me on the following:
1. Can I flash back and downgrade to Software version V20J from V20L.
2. Is there any root method for V10 t-mobile MM ver V20L.
1. It is well explained in this forum, you CANNOT go back without facing a software brick.
2. You can root your phone through Dirty_Cow method or by flash Eliminater74 ROM (Part1 & Part2).
Again, search for that in this section and in development one...
jonsat said:
1. It is well explained in this forum, you CANNOT go back without facing a software brick.
2. You can root your phone through Dirty_Cow method or by flash Eliminater74 ROM (Part1 & Part2).
Again, search for that in this section and in development one...
Click to expand...
Click to collapse
Thanks so much for your reply, I was about to flash it to downgrade my V10 from V20L to V20J i even downloaded the files for it Phew....
Okay, I have searched most of the rootings are V20J i have not found a method for rooting and twrp for V20L software update.
Please if u can share the link, that would be helpful...
thanks regards,
I wonder how people perform searches... by the way, few lines under this very thread, there is:
https://forum.xda-developers.com/tmobile-lg-v10/general/root-20l-dirty-cow-t3498722
jonsat said:
I wonder how people perform searches... by the way, few lines under this very thread, there is:
https://forum.xda-developers.com/tmobile-lg-v10/general/root-20l-dirty-cow-t3498722
Click to expand...
Click to collapse
Awwhh GOD!!! big thanks for your help, u r truly an awesome person. Peace and blessing upon u.
regards,

bricked, need help

it's a pretty long story but currently my system partition is wiped after it soft bricked, i also couldn't reflash stock roms with twrp so i tried to extract the recovery.img from the stock rom and flashing it over twrp to get the original recovery mode back to flash the update but for some reason it didn't work.
so now i can only boot into EMUI which keeps telling 'getting package info failed' meaning i can't update through it. i'm also able to reach the 'fastboot&rescue mode' screen but i know nothing about adb and even tho i watched 2-3 tutorial videos i couldn't really get it to work. all videos wanted me to boot up the phone and enable usb debugging which i can't. my phone was rooted before and i'm positive i've enabled it in the past but i'm not sure if it's still enabled or not, either way i'm not able to get it working.
is this salvageable?
i'd really appreciate some help if possible, thnx
nope. but even when i had twrp it wouldnt let me flash update.zip's
i still have fastboot screen so my guess is that i have to run it through adb, which i don't know how to do
Rommco05 said:
Hm, and which is your model and last function system?
edit: u can boot to system? If good understand u can
Click to expand...
Click to collapse
last update i had working was frd-l09c432b120
can't boot system
can't boot recovery mode (twrp)
i CAN boot to 'fastboot&recovery mode'
i CAN boot to EMUI (but EMUI keeps telling me 'Getting package info failed', it tries to connect and download but from what i can tell on the screen the download never starts)
Ok. Ive tried running 'adb devices' but i cant see my device, if i type 'fastboot devices' i find one device.
Dont know if im missing something or if this even matters.
But i'll try flashing twrp with fastboot
Rommco05 said:
This is right way
edit: frp is unlocked?
edit1: you need to flash old twrp 3.0.2.0 I think is right (if was your last firmware Marshmallow
Click to expand...
Click to collapse
TWRP is back!!
but how do i flash marshmallow with twrp? and what marshmallow file are you talking about, the one i mentioned above?
because i tried flashing these update.zip's with twrp before but it wouldn't let me.
i'm currently packaging the update.app files into a zip and moving it to the sdcard, that's the only way i can think of to flash these update files with twrp.
since it didn't work last time, i have my doubts but i'll give it a try
Rommco05 said:
Ok, just for clarification, your model is frd-l09c432, right?
Click to expand...
Click to collapse
yes. can't remember how to double check but way back when i downloaded these update files i was extremely careful to download the correct files.
and they worked and been working since they were the newest version, so i guess that has to be my model.
EDIT: and it's twrp-3.1.1-0
yea now it told me corrupt zip, last time i tried i got some other error, think it was some error about writing to system partition.
U can also flash this https://drive.google.com/file/d/0BwXB-CJiljwpS1o4UXo5b1JlRjQ/view and after
Dload this link once http://www.hihonor.com/uk/support/details/index.html?DOC_ID=92101
Rommco05 said:
Ok download this firmware B120 and flash via twrp https://www.androidfilehost.com/?w=files&flid=129477 after this go to reboot and tap reboot recovery. Now you should be in stock recovery and tap factory reset and after reboot. Now you hopefully will be able boot to ROM. (If u got some errors in twrp, don't care, installation must take about with minutes)
Click to expand...
Click to collapse
there's no B120 on that site, only B101 and B131. should i take B131 instead?
Any updates for your issue OP?
Sent from my Honor 8 using XDA Labs
Rommco05 said:
Sorry so flash B131 is better then B120
Click to expand...
Click to collapse
it's up and running again thank you so much, you're a life saver. i'd actually kiss you if you were here lol
i spent a few hours yesterday trying to find zipped update files ready for flashing in twrp, like the ones you linked.
do i have to do a factory reset after that? i haven't tried everything yet but my phone looks and works as if it never even stopped working in the first place.
i'm just happy i got all my files, numbers, photos etc back...
thank you so much once again
EDIT: yea sorry for the delayed response, i had to run an errand
Wow another one rommoco05 :highfive:
Add the fixed tag to the thread OP. Enjoy the device
You both are awesome ???
Rommco05 said:
lol. No u don't need to make factory reset, phone start from like factory reset. Upgrade to Nougat . If u want kiss me, kiss thanks button you're welcome
Click to expand...
Click to collapse
i'm trying to backup everything i need before doing a factory reset and i have a problem.
first time booting up i get the contact names on call logs for a few seconds and then they disappear because the contacts are gone. if i restore my data partition in twrp and boot up the system again i get the exact same thing. i'm guessing the contacts are saved at least temporarily somewhere on the data partition, is it possible to extract them somehow? i don't care if i have to write them down one by one from a .log, i got some important numbers that are worth the hassle for me
JimZiii said:
i'm trying to backup everything i need before doing a factory reset and i have a problem.
first time booting up i get the contact names on call logs for a few seconds and then they disappear because the contacts are gone. if i restore my data partition in twrp and boot up the system again i get the exact same thing. i'm guessing the contacts are saved at least temporarily somewhere on the data partition, is it possible to extract them somehow? i don't care if i have to write them down one by one from a .log, i got some important numbers that are worth the hassle for me
Click to expand...
Click to collapse
If you synced the contacts already then you can from google contacts.
I know this is completely backwards, but i found a twrp backup i did on my broken systems partition before i tried anything else. Maybe if i can undo what soft-bricked my phone i can get them back.
I installed/flashed a magisk module for xposed and after that i wasnt able to boot the system any longer. Is it possible to somehow uninstall this module and get the phone to boot again? Or is the only solution to flash a new stock rom?
Edit: havent synced with google in a while
JimZiii said:
I know this is completely backwards, but i found a twrp backup i did on my broken systems partition before i tried anything else. Maybe if i can undo what soft-bricked my phone i can get them back.
I installed/flashed a magisk module for xposed and after that i wasnt able to boot the system any longer. Is it possible to somehow uninstall this module and get the phone to boot again? Or is the only solution to flash a new stock rom?
Edit: havent synced with google in a while
Click to expand...
Click to collapse
Flash the backup of boot files
venugopalu007 said:
Flash the backup of boot files
Click to expand...
Click to collapse
the backup of the boot partition made no difference. even after flashing the new rom and the boot after nothing changed.
but i just solved it, i found a magisk uninstaller and after flashing that the phone booted up with all contacts, photos, apps+data intact.
when i first posted here i had wiped the systems partition and didn't know i still had a backup hidden away in a folder, so i'm extremely grateful for all your help and patience.
i still think i'm gonna update to nougat and i'm using hisuite that came with the phone, do you recommend any other backup application? do you know if app backups work if i update to nougat from marshmallow?
JimZiii said:
the backup of the boot partition made no difference. even after flashing the new rom and the boot after nothing changed.
but i just solved it, i found a magisk uninstaller and after flashing that the phone booted up with all contacts, photos, apps+data intact.
when i first posted here i had wiped the systems partition and didn't know i still had a backup hidden away in a folder, so i'm extremely grateful for all your help and patience.
i still think i'm gonna update to nougat and i'm using hisuite that came with the phone, do you recommend any other backup application? do you know if app backups work if i update to nougat from marshmallow?
Click to expand...
Click to collapse
For apps backup just download from playstore , because some apps are compitable with mm and some are nougat .so better to download again from playstore after updating to nougat.
Rommco05 said:
Huawei backup is pretty good I start saving my SMS on P8lite and now I have +15000 SMS saved and 2 years old calls logs
Click to expand...
Click to collapse
That was huge bro
Rommco05 said:
Yes, resume SMS take about 15 minutes
Click to expand...
Click to collapse
Bro can you make a guide how to backup and restore in Huawei.

How can I dirty flash stock emui 5 via twrp? Fails everytime.

Guys. I have tried and failed. Which exact zip do I need? Because the fullOtamf with pv fails. Which twrp do i need exactly? Because the openkirin one says error.
I flashed official arise viper system and it flashed but didn't install anything, further more my camera isn't working at all maybe because of selinux permissive I think, but I changed that to endorcing also, no luck, so I just need to dirty flash stock rom to fix it.
I'm a newbie to Huawei phones so preferably links of what twrp n file version u guys use would be highly appreciated.
It's hard to believe none of the people who viewed the post have ever flashed a stock rom via twrp. No one?
I really need some help here guys. Any advice is appreciated.
If you really need to flash it via twrp you need to download huawei update extractor and use it to create a flashable zip but that takes really long and one small mistake will ruin the firmware or your phone so i would recommend you to flash the stock recovery, update and then root, put twrp back etc.
MintCrystal556 said:
If you really need to flash it via twrp you need to download huawei update extractor and use it to create a flashable zip but that takes really long and one small mistake will ruin the firmware or your phone so i would recommend you to flash the stock recovery, update and then root, put twrp back etc.
Click to expand...
Click to collapse
Ok so somehow pushing volume up at boot gets me into "Huawei E-recovrry" and it says 3 things only 1) download latest software and recovery, 2) restart 3) shutdown. If I click first option it says Note: user data will be wiped after recovery install :/
Is this the one ur talking about? Can I do it without data wipe in anyway?
Lord. Tech said:
Ok so somehow pushing volume up at boot gets me into "Huawei E-recovrry" and it says 3 things only 1) download latest software and recovery, 2) restart 3) shutdown. If I click first option it says Note: user data will be wiped after recovery install :/
Is this the one ur talking about? Can I do it without data wipe in anyway?
Click to expand...
Click to collapse
You could try pressing the "download latest software and recovery" button but i dont think it will work. I would recommend you to flash the stock recovery via adb and/or fastboot (create backups of course) and then update via team mt's firmware finder. After its done, unlock the phone again and root it. I dont know if it will wipe data because you have twrp on your phone. (I dont think it will wipe data but i still recommend you to make backups) NEVER EXTRACT THE UPDATE.APP AND TRY TO INSTALL THE IMAGES. I DID IT AND I GOT IN ERROR MODE.
MintCrystal556 said:
You could try pressing the "download latest software and recovery" button but i dont think it will work. I would recommend you to flash the stock recovery via adb and/or fastboot (create backups of course) and then update via team mt's firmware finder. After its done, unlock the phone again and root it. I dont know if it will wipe data because you have twrp on your phone. (I dont think it will wipe data but i still recommend you to make backups) NEVER EXTRACT THE UPDATE.APP AND TRY TO INSTALL THE IMAGES. I DID IT AND I GOT IN ERROR MODE.
Click to expand...
Click to collapse
Damn! I can't believe it's such a complicated process! I miss my Nexus now lol, it was such a breeze to flash stuff on it..
So basically there's no "dirty flashing" the stock rom... I have to install the whole firmware like it's new and then do the entire process of unlocking bootloader(which wipes everything), rooting, getting twrp, n start as new since a backup flash via twrp of my current system after that would again reinstall the incompatible viper mod that has defected my camera right now... Sigh.
I wish Huawei made it easier for people to do these things for people who want to.
Thanks for all the help! :good: I really wish there was a better way than having to start as new.
Lord. Tech said:
Damn! I can't believe it's such a complicated process! I miss my Nexus now lol, it was such a breeze to flash stuff on it..
So basically there's no "dirty flashing" the stock rom... I have to install the whole firmware like it's new and then do the entire process of unlocking bootloader(which wipes everything), rooting, getting twrp, n start as new since a backup flash via twrp of my current system after that would again reinstall the incompatible viper mod that has defected my camera right now... Sigh.
I wish Huawei made it easier for people to do these things for people who want to.
Thanks for all the help! :good: I really wish there was a better way than having to start as new.
Click to expand...
Click to collapse
Dload doesn't clear data at all. But those files should be flashed via dload but issue is when you unlock bootloader, it will reset again.
You can flash certain files via twrp but that is data zip and not main zip file. Let me know the version you want and will try my best to help buddy.
Please give Current build and model number and new build number you are trying.
You can just restore data and it will not restore your viper mod as that is going to system partition as you flashed zip. So restoring only data will not bring back the viper mod.
shashank1320 said:
Dload doesn't clear data at all. But those files should be flashed via dload but issue is when you unlock bootloader, it will reset again.
You can flash certain files via twrp but that is data zip and not main zip file. Let me know the version you want and will try my best to help buddy.
Please give Current build and model number and new build number you are trying.
You can just restore data and it will not restore your viper mod as that is going to system partition as you flashed zip. So restoring only data will not bring back the viper mod.
Click to expand...
Click to collapse
Data zip is huawei apps etc? Or u mean my own backup data?
But Thanks alottt bro!
Model BLN-L21
Build C185-B361
I was just trying to flash same system again so that viper will be erased
I didnt try any new build yet because I'm really new to all these softwares like FWfinder and the other ones, I downloaded them but couldn't understand much sadly.
so I just did ur dload method for b361 since that is the only one I found with fullota-mf-pv version.
Is there any new build for dload available? Because I don't know how to update :/ I'm sorry for all the noob requests, I used to be such a pro at nexus lol
Lord. Tech said:
Data zip is huawei apps etc? Or u mean my own backup data?
But Thanks alottt bro!
Model BLN-L21
Build C185-B361
I was just trying to flash same system again so that viper will be erased
I didnt try any new build yet because I'm really new to all these softwares like FWfinder and the other ones, I downloaded them but couldn't understand much sadly.
so I just did ur dload method for b361 since that is the only one I found with fullota-mf-pv version.
Is there any new build for dload available? Because I don't know how to update :/ I'm sorry for all the noob requests, I used to be such a pro at nexus lol
Click to expand...
Click to collapse
Let me check this mate for you. Will take sometime as will be occupied most of the time today so may or may not able to provide. You can install main zip that will remove viper but it will relock bootloader so unlocking it will erase data. Best way i think of is-
Do full twrp backup
Copy the twrp to sd card or pc
Use dload
Unlock bootloader
Flash twrp
Root it
Restore backup only for data and it will not install viper.
Or
Do titanium backup of all the user app and data.
Copy to pc or sd card.
Use dload
Unlock bootloader, twrp and root.
Boot and restore titanium backup
I know these are tedious task but want to have your data intact while without messing up with the phone.
Let me know in case you need files to flash or can search..good luck.
shashank1320 said:
Let me check this mate for you. Will take sometime as will be occupied most of the time today so may or may not able to provide. You can install main zip that will remove viper but it will relock bootloader so unlocking it will erase data. Best way i think of is-
Do full twrp backup
Copy the twrp to sd card or pc
Use dload
Unlock bootloader
Flash twrp
Root it
Restore backup only for data and it will not install viper.
Or
Do titanium backup of all the user app and data.
Copy to pc or sd card.
Use dload
Unlock bootloader, twrp and root.
Boot and restore titanium backup
I know these are tedious task but want to have your data intact while without messing up with the phone.
Let me know in case you need files to flash or can search..good luck.
Click to expand...
Click to collapse
I think that might work! Thanks so much for the tips!! I will try it in few days since I have my MBBS exam on Monday so after that I'll do it, but thanks alot for ur advice!
I know you're busy, I really respect that, but Just one last thing, can u tell me which is the latest version of nougat I can use with dload for my model? Can I use B374 fullota-mf? But there is no pv for that version so just want to confirm.
Lord. Tech said:
I think that might work! Thanks so much for the tips!! I will try it in few days since I have my MBBS exam on Monday so after that I'll do it, but thanks alot for ur advice!
I know you're busy, I really respect that, but Just one last thing, can u tell me which is the latest version of nougat I can use with dload for my model? Can I use B374 fullota-mf? But there is no pv for that version so just want to confirm.
Click to expand...
Click to collapse
OT- good luck for exams
Let me check mate the latest version

How to update FRDL09 Honor 8 to Oreo 8.0.0.521 FRD-L09C432B521

Hi I just saw the update 8.0.0.521 FRD-L09C432B521 is available in Firmware finder android app
I tried to use the method, I used before to update my rooted phone, flashing stock recovery first, but it s not working :
-Classic OTA (no firmware finder ) cant find it
-firmware finder proxy method, I got a "checksum control error at the beginning of the 1.16GO OTA download
I actually have B406 installed
I check the 3 "FullOta-MF-PV" available in firmware finder, but there are "not approved for installation"
Is there a way to bypass and install anyway, or should I just wait for another update to be usable?
Thanks
fredfred41 said:
Hi I just saw the update 8.0.0.521 FRD-L09C432B521 is available in Firmware finder android app
I tried to use the method, I used before to update my rooted phone, flashing stock recovery first, but it s not working :
-Classic OTA (no firmware finder ) cant find it
-firmware finder proxy method, I got a "checksum control error at the beginning of the 1.16GO OTA download
I actually have B406 installed
I check the 3 "FullOta-MF-PV" available in firmware finder, but there are "not approved for installation"
Is there a way to bypass and install anyway, or should I just wait for another update to be usable?
Thanks
Click to expand...
Click to collapse
DONT, I Tried To Use HurUpdater To Get Oreo Early Even If Its Not Approved, I Got Bricked, I Was Stuck At A Fastboot Error Screen, My Bootloader Was Still Unlocked Because I Put Another Custom Recovery With HurUpdater. So I Booted To ER Recovery And It Looked Different, It Looked Much Better Than The Android 7 ER Recovery. Then Next In Order To Get Out Of This Brick, I Pressed The Button To Dowbload Latest Firmware And Recovery And It Worked!! Usually That Does Not Work With Android 7 ER Recovery. So I Typed In My Wifi Password And It Installed And Removed Everything, So I Was Back At B406 FRD-L09C432. But I Had An "Appdata" Back up in twrp before i did this. Then I Got All My Data Back (Apps, Saves On Games, Even My Settings Were Back From The Appdata Backup From That TWRP Appdata Backup)
SuperSwordSmasher said:
DONT, I Tried To Use HurUpdater To Get Oreo Early Even If Its Not Approved, I Got Bricked, I Was Stuck At A Fastboot Error Screen, My Bootloader Was Still Unlocked Because I Put Another Custom Recovery With HurUpdater. So I Booted To ER Recovery And It Looked Different, It Looked Much Better Than The Android 7 ER Recovery. Then Next In Order To Get Out Of This Brick, I Pressed The Button To Dowbload Latest Firmware And Recovery And It Worked!! Usually That Does Not Work With Android 7 ER Recovery. So I Typed In My Wifi Password And It Installed And Removed Everything, So I Was Back At B406 FRD-L09C432. But I Had An "Appdata" Back up in twrp before i did this. Then I Got All My Data Back (Apps, Saves On Games, Even My Settings Were Back From The Appdata Backup From That TWRP Appdata Backup)
Click to expand...
Click to collapse
Ok.... Thanks for the explaination of your bad experience, and the fix, maybe someone have a safer method.
SuperSwordSmasher said:
DONT, I Tried To Use HurUpdater To Get Oreo Early Even If Its Not Approved, I Got Bricked, I Was Stuck At A Fastboot Error Screen, My Bootloader Was Still Unlocked Because I Put Another Custom Recovery With HurUpdater. So I Booted To ER Recovery And It Looked Different, It Looked Much Better Than The Android 7 ER Recovery. Then Next In Order To Get Out Of This Brick, I Pressed The Button To Dowbload Latest Firmware And Recovery And It Worked!! Usually That Does Not Work With Android 7 ER Recovery. So I Typed In My Wifi Password And It Installed And Removed Everything, So I Was Back At B406 FRD-L09C432. But I Had An "Appdata" Back up in twrp before i did this. Then I Got All My Data Back (Apps, Saves On Games, Even My Settings Were Back From The Appdata Backup From That TWRP Appdata Backup)
Click to expand...
Click to collapse
Is this method using a russian systemversion, or rebranding the phone?
fredfred41 said:
Is this method using a russian systemversion, or rebranding the phone?
Click to expand...
Click to collapse
HurUpdater Is Meant For Updating Your Device, I Was Using FRD-L09C432
I Would Suggest Waiting Until Someone Has A Better Method
Don't rush, just wait. I'm currenty sitting on B407. It'll be available in some time via OTA.
LightyDust said:
Don't rush, just wait. I'm currenty sitting on B407. It'll be available in some time via OTA.
Click to expand...
Click to collapse
Yep, Its Worth Waiting Oreo Bricked My Phone 2 Times With My First And Second Attempt With HurUpdater
SuperSwordSmasher said:
Yep, Its Worth Waiting Oreo Bricked My Phone 2 Times With My First And Second Attempt With HurUpdater
Click to expand...
Click to collapse
Please stop using capital letters at the beggining of each word
I think we all should wait for official update. If the firmware is on Firmware Finder, it means that the official update is very soon. We need to be a little bit more patient.
Sideness said:
Please stop using capital letters at the beggining of each word
I think we all should wait for official update. If the firmware is on Firmware Finder, it means that the official update is very soon. We need to be a little bit more patient.
Click to expand...
Click to collapse
But When Its Released How Will Rooted People Flash It Then?
Pls tell me that i wont have to lose my all my data again.
Does A Android Nougat AppData Backup From TWRP Work On Oreo?
SuperSwordSmasher said:
But When Its Released How Will Rooted People Flash It Then?
Pls tell me that i wont have to lose my all my data again.
Does A Android Nougat AppData Backup From TWRP Work On Oreo?
Click to expand...
Click to collapse
IMHO, you have to understand that modifying anything from stock room (root, bootloader...) will prevent you to get any official update easily.
By rooting, you chose this.
pix106 said:
IMHO, you have to understand that modifying anything from stock room (root, bootloader...) will prevent you to get any official update easily.
By rooting, you chose this.
Click to expand...
Click to collapse
When I Rooted, It Made My Phone Much More Faster, It Disable Apps From Running In The Background, I Kinda Wanted It Sooooooooooooooooooooooooooooo......
Only If Huawei Allows You To Update While Rooted.....
Plus Firmware Finder Dns And Proxy Stopped Working, So I Have No Way To Force Update It Using The Stock Recovery
HurUpdater Bricks My Device When I Try To Update To Oreo, I Think Im Doing Something Wrong Though
@SuperSwordSmasher Please stop using capital letters at the beggining of each word [emoji33]
I have Oreo witch HurUpdater and work fine.
The best way to upgrade to Oreo is to use method 2 with root on this guide :
https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
Assuming that you're on Nougat and Oreo is available for your region (or you already rebranded).
If the phone doesn't boot, go to recovery and wipe data.
Then use multitool v8 to install emui 8 compatible recovery, it's not perfect but Magisk can be installed (but uninstaller doesn't work ... Be careful with the modules you use ?)
I received and install B407 Today, stock usual OTA way... Maybe B521 soon..
BriceFW said:
The best way to upgrade to Oreo is to use method 2 with root on this guide :
https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
Assuming that you're on Nougat and Oreo is available for your region (or you already rebranded).
If the phone doesn't boot, go to recovery and wipe data.
Then use multitool v8 to install emui 8 compatible recovery, it's not perfect but Magisk can be installed (but uninstaller doesn't work ... Be careful with the modules you use ?)
Click to expand...
Click to collapse
For Some Reason When I Try To Do Method 2 And Did All The Steps And Tryed To Flash With ER Recovery, I Get An Error In ER Recovery And Send Me Back. I Already Did The Steps, Even The Terminal Thing Too, But, It Just Wont Work Each Time I Try
I Have A Question, Does Nougat AppData Backup Work On Oreo?
SuperSwordSmasher said:
For Some Reason When I Try To Do Method 2 And Did All The Steps And Tryed To Flash With ER Recovery, I Get An Error In ER Recovery And Send Me Back. I Already Did The Steps, Even The Terminal Thing Too, But, It Just Wont Work Each Time I Try
I Have A Question, Does Nougat AppData Backup Work On Oreo?
Click to expand...
Click to collapse
Once again, please stop using capital letters for each word. Reading you is just painful
Sideness said:
Once again, please stop using capital letters for each word. Reading you is just painful
Click to expand...
Click to collapse
+1
Zeljkoa said:
+1
Click to expand...
Click to collapse
+1
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
SuperSwordSmasher said:
For Some Reason When I Try To Do Method 2 And Did All The Steps And Tryed To Flash With ER Recovery, I Get An Error In ER Recovery And Send Me Back. I Already Did The Steps, Even The Terminal Thing Too, But, It Just Wont Work Each Time I Try
I Have A Question, Does Nougat AppData Backup Work On Oreo?
Click to expand...
Click to collapse
Pls stop with using capital letters in te start of each word.
boran1 said:
+1
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
Pls stop with using capital letters in te start of each word.
Click to expand...
Click to collapse
Really... Guys...?

Categories

Resources