Database Info

sw rev check fail device 5 binary 4

i have a galaxy s6 (SM-G920F)and it failed in an update and got stuck in a bootloop,i tried reflashing stock rom (6.0.1),ive tried smartswitch but nothing is working I cant get into recovery either,when I tried reflashing stock rom with odin it came up with sw rev check fail device 5 binary 4,any ideas what this means? as far as I can tell its a bootloader problem

god1980 said:
i have a galaxy s6 (SM-G920F)and it failed in an update and got stuck in a bootloop,i tried reflashing stock rom (6.0.1),ive tried smartswitch but nothing is working I cant get into recovery either,when I tried reflashing stock rom with odin it came up with sw rev check fail device 5 binary 4,any ideas what this means? as far as I can tell its a bootloader problem
Click to expand...
Click to collapse
Use smartswitch emergency recovery , samsung have put in place some issues with the Bootloader, moreso if you're on a newer bootloader then you cannot install a firmware which has a lower bootloader

sofir786 said:
Use smartswitch emergency recovery , samsung have put in place some issues with the Bootloader, moreso if you're on a newer bootloader then you cannot install a firmware which has a lower bootloader
Click to expand...
Click to collapse
ive tried smartswitch and it just says SM-G920F does not support initialization please contact customer services

same problem here, any luck finding a solution?

god1980 said:
ive tried smartswitch and it just says SM-G920F does not support initialization please contact customer services
Click to expand...
Click to collapse
When you downloaded your firmware for odin, was it the very newest update? Or an old one, I've noticed some older firmwares fail to flash due to being on a newer bootloader

bogdanserban said:
same problem here, any luck finding a solution?
Click to expand...
Click to collapse
I have same issue, all the stock software out there seem to be dated where can I new stock firmware? I have Samsung S 6 from tmobile SM-G920T1.

This is my problem:
device: galaxy s6 edge tmobile
system status: custom
sw rev. check fail. device:5, binary: 2
what should I do?

i solved same problem. Just flash full nougat 7.0 via odin, don't flash MM 6.0.1.

rezstrk said:
i solved same problem. Just flash full nougat 7.0 via odin, don't flash MM 6.0.1.
Click to expand...
Click to collapse
from where to download?

dohcvtec said:
from where to download?
Click to expand...
Click to collapse
here! have fun!
For 920F
https://drive.google.com/file/d/0B0b2ginGifb-U2VzdUtzRmJTYm8/view

rezstrk said:
here! have fun!
https://drive.google.com/file/d/0B0b2ginGifb-U2VzdUtzRmJTYm8/view
Click to expand...
Click to collapse
thanks. I'll get back to you and let you know what happened. thanks again!

dohcvtec said:
thanks. I'll get back to you and let you know what happened. thanks again!
Click to expand...
Click to collapse
I also had the same issue on SW REV DEVICE 5 BINARY 4
I downloaded the Nougat 7.0 United Kingdom/Ireland and flashed using Odin and now my S6 is up and running. You can try it too.
I had tried other versions with no success.

Do you know wjere I can find Nougat for s6 edge, USA T-Mobile? Thanks

dohcvtec said:
Do you know wjere I can find Nougat for s6 edge, USA T-Mobile? Thanks
Click to expand...
Click to collapse
Yo, did you get it fixed? My phone for tmobile cant get passed flashing

vandres1975 said:
Yo, did you get it fixed? My phone for tmobile cant get passed flashing
Click to expand...
Click to collapse
Hey, nope. Didn't manage to get passed it. Nothing so far. Really looking for some help on that issue but no luck so far. If I come up with a solution, I will post it here.

Dang that sucks, idk what I'm going to do to unbrick it.

dohcvtec said:
Hey, nope. Didn't manage to get passed it. Nothing so far. Really looking for some help on that issue but no luck so far. If I come up with a solution, I will post it here.
Click to expand...
Click to collapse
Hey, so I have the bootloader problem too and I think we have to wait for the nougat update for the type of phone you have. I have a galaxy s6 tmobile so I think I have to get nougat and flash that when it comes out for tmobile. You have to do the same I think but for now Im gonna send it to samsung and act dumb. Hopefully maybe they fix it and send it back. Do you think they will accept my phone though? It was rooted and had nemesis rom. for nougat port from s7 edge. Also current binary is: Samsung Official. System Status is: Custom. They can see knox is tripped since the counter is void: 1.

vandres1975 said:
Hey, so I have the bootloader problem too and I think we have to wait for the nougat update for the type of phone you have. I have a galaxy s6 tmobile so I think I have to get nougat and flash that when it comes out for tmobile. You have to do the same I think but for now Im gonna send it to samsung and act dumb. Hopefully maybe they fix it and send it back. Do you think they will accept my phone though? It was rooted and had nemesis rom. for nougat port from s7 edge. Also current binary is: Samsung Official. System Status is: Custom. They can see knox is tripped since the counter is void: 1.
Click to expand...
Click to collapse
Hey, it depends if you have warranty on the phone or not. If you have warranty, it will not cover your expenses because it's void after unlocking bootloader and rooting. If you don't have warranty and you are paying them anyways, they should have no trouble accepting it. Who would deny taking money. I hope they can fix it for you and I'm sorry we couldn't figure out how to. What you said about Nougat is true. I have checked that information as well. There is no Nougat for TMobile yet. We just have to wait. Again, in the mean time if I fix it, I will post my solution here.

dohcvtec said:
Hey, it depends if you have warranty on the phone or not. If you have warranty, it will not cover your expenses because it's void after unlocking bootloader and rooting. If you don't have warranty and you are paying them anyways, they should have no trouble accepting it. Who would deny taking money. I hope they can fix it for you and I'm sorry we couldn't figure out how to. What you said about Nougat is true. I have checked that information as well. There is no Nougat for TMobile yet. We just have to wait. Again, in the mean time if I fix it, I will post my solution here.
Click to expand...
Click to collapse
Alright.

dohcvtec said:
Do you know wjere I can find Nougat for s6 edge, USA T-Mobile? Thanks
Click to expand...
Click to collapse
Try the first one from the top from here http://updato.com/firmware-archive-select-model?q=sm+g920t&exact=1
with Odin v3.12.3

[HOW TO] Carrier Switch Galaxy S8/S8+ **SNAPDRAGON**

*READ FIRST*
This thread is now completely dedicated to the aspect of Carrier Switching on the Snapdragon model of the Galaxy S8/S8+, the current root progress can be seen here:
Current ROOT Progress for G950U/G955U Snapdragon
Please Note that if your device is network locked this WILL NOT unlock it for use on other carriers, however it will allow the switching of carriers and carrier specific features on network unlocked devices just by changing sim cards, the device will reboot and your done. As for those with a network locked device this thread still applies to you, if you are interested in a bloat free experience(that is faster and smoother than stock touchwiz), on your Galaxy S8/S8+​
Let's Begin!
Download the firmware for the unlocked S8/S8+ here:
G950U1UE1AQDC_XAA
Download the Prince Cosmy version of Odin here:
Odin_3.12.3_Modified
Enable developer options on your device:
Settings----->About Phone----->Click Build Number 7 times
Enable USB Debugging:
Settings----->Developer Options-----USB Debugging
Put your device into download mode: Volume Down + Bixby + Power
(accept the warning and connect your device to your computer)
Take the G950U1.zip you downloaded in step 1 and extract it, then place the BL,AP,CP,and CSC files into their corresponding places within Odin and press start
Once finished the device will boot back up and you will be free to disconnect it from your computer
You now have the unlocked, bloat free, firmware on your S8/S8+
CONTRIBUTORS
@Maltego for hosting files
@mweinbach for originally getting the unlocked firmware and for posting a tutorial on flashing it
@Acoustichayes for creating a dedicated root thread​

Delete

I have the s8+ version installing now. Will report back. Op make sure they uncheck Auto reboot and f. Reset time in odin first.
Sent from my Nexus 6P using Tapatalk

I've been getting protocol version errors trying to flash via odin 3.10 (the only one that I can download)
EDIT: installing now, needed the latest odin

Akumai said:
I've been getting protocol version errors trying to flash via odin 3.10 (the only one that I can download)
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=529152257862722617
Here is Odin 3.12.3

Persianhawkes said:
I have the s8+ version installing now. Will report back. Op make sure they uncheck Auto reboot and f. Reset time in odin first.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
This is for an s8....Not plus. Be careful.

suzook said:
This is for an s8....Not plus. Be careful.
Click to expand...
Click to collapse
I know. I have the s8+ file. Flashed and booted up now I have to do some tinkering.
Sent from my Nexus 6P using Tapatalk

I can't wait to give this a run this weekend

Persianhawkes said:
I know. I have the s8+ file. Flashed and booted up now I have to do some tinkering.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Oh, ok. Didn't realize that. So does this overwrite the carrier info? Or is that untouched?

suzook said:
Oh, ok. Didn't realize that. So does this overwrite the carrier info? Or is that untouched?
Click to expand...
Click to collapse
As of right now there is no way to overwrite carrier info, we are working on it though. That reserved comment is going to be where i put all that is known, been tried, etc with carrier switching just a little busy right now

My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.

Triforce1001 said:
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Click to expand...
Click to collapse
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.

Triforce1001 said:
My build number is SM-G950A and my firmware is G950USQU1AQD9. I am quite familiar with the concept and process of rooting but I have never had an opportunity to actually get into it. I was wondering if my device is compatible with this firmware. If so I am fine with testing so long as there is a reliable way to restore my phone if something were to happen.
Click to expand...
Click to collapse
This is compatible with your device all US versions of the S8 and S8+ have the same model number. I have your stock firmware i just need to upload it to androidfilehost

If anyone feels like it joining I have created an IRC room we can all chat in and brainstorm things. It's #sgs8 on irc.freenode.net. Hasn't had many users since I created it but I lurk in there when I'm at home. I'd love some company. Let's get this thing rooted so we can shut all the haters up!

Glad to see more devs working on this

Akumai said:
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Click to expand...
Click to collapse
I attempted to install TWRP on it but secure check fail boot i believe i will try again, but we only have the exynos twrp for the S8 to work with....
Unless someone can make a compatible version for Snapdragon?

Akumai said:
I went ahead and did the favors of doing some testing, in terms of restoral anyhow. From my experience, you do not have access to the usual desktop, and you have very few apps by default(none actually, just settings). I was able to revert to the original stock firmware via odin without a hitch. I did not try installing TWRP on this firmware however, but I can confirm the existence of OEM Unlock, which, by itself, claims to unlock the bootloader.
Click to expand...
Click to collapse
On no device that ive seen does OEM unlock in fact unlock the bootloader.
sent from my S8 plus, Note 7 or S7 Edge

STF_TimelessGoD said:
I attempted to install TWRP on it but secure check fail boot i believe i will try again, but we only have the exynos twrp for the S8 to work with....
Unless someone can make a compatible version for Snapdragon?
Click to expand...
Click to collapse
Contact @ashyx he's very good with Samsung and TWRP

force70 said:
On no device that ive seen does OEM unlock in fact unlock the bootloader.
sent from my S8 plus, Note 7 or S7 Edge
Click to expand...
Click to collapse
it merely mentioned that it allows "the unlocking of the bootloader"

Akumai said:
it merely mentioned that it allows "the unlocking of the bootloader"
Click to expand...
Click to collapse
Thats not what that means is what im trying to say lol. That option on sammy phones has never really done much other than allow flashing in odin
What is of note is that i dont have that on my S8 which is new that option is always there.

[REQUEST] Galaxy S8+ G955U Sprint CRD4 Bootloader rev3 firmware

Alright so I guess I'm stuck in a situation. I recently updated my firmware to Sprint's latest one (CRD4) and I didn't realize that the bootloader was rev3 and I tried flashing a lower bootloader version. I got a fail in odin and now my phone just reboots to recovery (it doesn't fully enter recovery either, it just says error or installing update). I've tried flashing:
G955USQS2BQL1 (Sprint)
G955USQU2CRC5 (Sprint)
G955USQU3CRD4 (T-Mobile)
and it still says fail. I have no idea what else to do next besides taking it to Sprint but I cracked the corner of my screen and I'm sure they will charge me to fix it. Any help would be greatly appreciated, thanks.

Unfortunately you are stuck on it. In the disclaimer is said you would not be able to downgrade to a previous version for security reasons. You will probably have to wait till the new Sprint version is available to download.

esjames said:
Unfortunately you are stuck on it. In the disclaimer is said you would not be able to downgrade to a previous version for security reasons. You will probably have to wait till the new Sprint version is available to download.
Click to expand...
Click to collapse
How long do you think that will take since this is my only phone?

You will have to wait until an Odin flashable package of CRD4 or another bootloader 3 firmware becomes available. Without a complete BL3 system flash you are SOL

I think I'll hold off on the OTA update until I hear some safe reports

LordAbolition said:
Alright so I guess I'm stuck in a situation. I recently updated my firmware to Sprint's latest one (CRD4) and I didn't realize that the bootloader was rev3 and I tried flashing a lower bootloader version. I got a fail in odin and now my phone just reboots to recovery (it doesn't fully enter recovery either, it just says error or installing update). I've tried flashing:
G955USQS2BQL1 (Sprint)
G955USQU2CRC5 (Sprint)
G955USQU3CRD4 (T-Mobile)
and it still says fail. I have no idea what else to do next besides taking it to Sprint but I cracked the corner of my screen and I'm sure they will charge me to fix it. Any help would be greatly appreciated, thanks.
Click to expand...
Click to collapse
There is now an ODIN file for bootloader 3 CRD4. You can find the link in the Oreo Beta thread. It should fix your phone

Nitefire77 said:
There is now an ODIN file for bootloader 3 CRD4. You can find the link in the Oreo Beta thread. It should fix your phone
Click to expand...
Click to collapse
Thank you for telling me. It gives me an error though when I try to download it from SamFirm
Code:
Checking firmware for SM-G955U/SPR/G955USQU3CRD4/G955UOYN3CRD4/G955USQU3CRD4/G955USQU3CRD4
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
Update: Nvm found it. Had to go to the last page

Do you have z3x?
You dont need z3x to flash the tmobile variant, but it makes it far simpler. Which version of odin are you using? If its the prince comsey you will more than likely get the mismatch error.

LordAbolition said:
Thank you for telling me. It gives me an error though when I try to download it from SamFirm
Code:
Checking firmware for SM-G955U/SPR/G955USQU3CRD4/G955UOYN3CRD4/G955USQU3CRD4/G955USQU3CRD4
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
Update: Nvm found it. Had to go to the last page
Click to expand...
Click to collapse
I'm in the same situation as you ... but instead i have the s8 not the s8+ .... been searching like crazy but only see the odin files for s8+ ... do you by any chance know where I can get the files for the s8? Thanks in advance if you can help.

SprintBama said:
I'm in the same situation as you ... but instead i have the s8 not the s8+ .... been searching like crazy but only see the odin files for s8+ ... do you by any chance know where I can get the files for the s8? Thanks in advance if you can help.
Click to expand...
Click to collapse
No worries. I fixed the situation. Thanks for reading!

I am clarifying this, this is s8 plus now stuck on rev3? I got an s8 and went to another forum thread and was told this isn't true. I am stuck on rev3. FYI, updato has the new s8plus firmware if you haven't got it already.

SM-G930A 6.0.1 unlocked running on T-Mobile flash to SM-G930T 8.0?

Hey guys,
My dad has a SM-G930A 6.0.1 unlocked running on T-Mobile. It is starting to show it's age (battery drain, apps not running like they should, etc.) and is still stuck on 6.0.1.. From my understanding, it should be possible to flash to SM-G930T, however I am a bit lost as to where to begin the process to do so. I tired going straight to 8.0 by flashing the SM-G930T 8.0 firmware files but this didn't work (I didn't think it would work, but it was worth a try). With that said, would it be better for me to just stick to updating to SM-G930A 7.0 via the guides posted, or is there a way for me to Flash the SM-930T 8.0 firmware? Thanks in advance.

leprkon said:
Hey guys,
My dad has a SM-G930A 6.0.1 unlocked running on T-Mobile. It is starting to show it's age (battery drain, apps not running like they should, etc.) and is still stuck on 6.0.1.. From my understanding, it should be possible to flash to SM-G930T, however I am a bit lost as to where to begin the process to do so. I tired going straight to 8.0 by flashing the SM-G930T 8.0 firmware files but this didn't work (I didn't think it would work, but it was worth a try). With that said, would it be better for me to just stick to updating to SM-G930A 7.0 via the guides posted, or is there a way for me to Flash the SM-930T 8.0 firmware? Thanks in advance.
Click to expand...
Click to collapse
Wow you guys really get screwed over there in the US with cell phones. It's a pain in the a** to do anything with your phones.
Anyway I'm guessing the phone was originally AT&T right? And now it's unlocked to any carrier.
If you just want to update the phone to the latest firmware then just flash AT&T Oreo. It won't affect the SIM it will still work as before.
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Make sure you back up all the things you want to keep before flashing

cooltt said:
Wow you guys really get screwed over there in the US with cell phones. It's a pain in the a** to do anything with your phones.
Anyway I'm guessing the phone was originally AT&T right? And now it's unlocked to any carrier.
If you just want to update the phone to the latest firmware then just flash AT&T Oreo. It won't affect the SIM it will still work as before.
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Make sure you back up all the things you want to keep before flashing
Click to expand...
Click to collapse
Thanks for the reply! I appreciate the direction. You are right, US phones are a pain. And yes, the phone was originally an AT&T phone, but was unlocked.
As for unlocking the bootloader, I've found different sources that say that unlocking the bootloader on this particular phone is not possible with this particular phone. I did read something about an engineering bootloader being used to get around a locked bootloader for rooting. Could this be used for flashing as well?

cooltt said:
If you want to flash any other firmware including T Mobile then you'll need to unlock the bootloader on the device and that's a whole different ball game. With plenty of guides on how to online.
Click to expand...
Click to collapse
That's not entirely true. Using Odin you can flash any USA firmware onto any other USA device, no bootloader unlocking required.
It's very common for people to flash G930U over their G930V/T/A/P devices to remove bloatware
leprkon said:
As for unlocking the bootloader, I've found different sources that say that unlocking the bootloader on this particular phone is not possible with this particular phone. I did read something about an engineering bootloader being used to get around a locked bootloader for rooting. Could this be used for flashing as well?
Click to expand...
Click to collapse
It's unstable and only lets the device charge up to 80%, your best bet woulld just be a full flash with Odin
This guide is a bit dated but it's the best one out there. Just make sure you google the latest Odin and use all 4 firmware files when flashing https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin

Beanvee7 said:
That's not entirely true. Using Odin you can flash any USA firmware onto any other USA device, no bootloader unlocking required.
It's very common for people to flash G930U over their G930V/T/A/P devices to remove bloatware
It's unstable and only lets the device charge up to 80%, your best bet woulld just be a full flash with Odin
This guide is a bit dated but it's the best one out there. Just make sure you google the latest Odin and use all 4 firmware files when flashing https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks for the reply! I had tried flashing the 8.0 G930T variant last night with the latest version of Odin and the PrinceComsy version and got a Model Mismatch error. I read that the modified Odin3 v3.13.1_3B_PatcheD would let me flash the firmware and ignore the Model Mismatch error. However, I didn't go through with it because I was not sure if I would brick my phone and instead erred on the side of caution and made my post here. Would I be safe to flash the files from SM-G930T_1_20180625111401_xf3965l42p_fac onto my current device?

If your firmware files are from a trusted source like sammobile, updato or samfirmtool then it should be fine
Odin3 v3.13.1_3B_PatcheD seems to have positive feedback here on XDA so should be fine too https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572

Beanvee7 said:
If your firmware files are from a trusted source like sammobile, updato or samfirmtool then it should be fine
Odin3 v3.13.1_3B_PatcheD seems to have positive feedback here on XDA so should be fine too https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
Thanks for the assist! Everything worked like a charm!

leprkon said:
Thanks for the assist! Everything worked like a charm!
Click to expand...
Click to collapse
Great glad it all worked out

leprkon said:
Thanks for the assist! Everything worked like a charm!
Click to expand...
Click to collapse
Greetings-
I apologize for jumping in an already created thread, but I think I am in the same situation, and like to verify with you both before I use the advice please. I have a SM-G930T that I just purchased, and really like to run a custom rom. But I understand I can not because I have Android 8 on it. I know how to use Odin, and have the latest version plus you guys talked about it here. I have also already downloaded the stock rom from sammobile site. What are my options? Is there a rom I can flash the phone with using Odin that would provide better performance, less G..bage, and more battery life? Is there a way for me to root the phone? I really need an app that requires the phone to be rooted.
Thanks

[email protected] said:
Greetings-
I apologize for jumping in an already created thread, but I think I am in the same situation, and like to verify with you both before I use the advice please. I have a SM-G930T that I just purchased, and really like to run a custom rom. But I understand I can not because I have Android 8 on it. I know how to use Odin, and have the latest version plus you guys talked about it here. I have also already downloaded the stock rom from sammobile site. What are my options? Is there a rom I can flash the phone with using Odin that would provide better performance, less G..bage, and more battery life? Is there a way for me to root the phone? I really need an app that requires the phone to be rooted.
Ok, so flash any unbranded Stock Rom for your device using this version of Odin which has been specifically modified to flash US devices. https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572 PatcheD.zip is the file you want to download.
Then when you have checked the phone is working ok on undrnaded firmware you can go ahead and root the device using this method which is again for US Qualcomm devices. https://www.****************/2018/0...on-galaxy-s7-and-s7-edge-on-android-8-0-oreo/
Take you time and read instructions.
Click to expand...
Click to collapse

Can I get unbranded stock firmware from sammobile? I understand the generic meaning of it, but I need more information on how to get them and what I need to know to work with them.

[email protected] said:
Can I get unbranded stock firmware from sammobile? I understand the generic meaning of it, but I need more information on how to get them and what I need to know to work with them.
Click to expand...
Click to collapse
If I understand it correctly there is no unbranded firmware for the US, its all network specific but you can flash unbranded UK firmware and it will work fine, UK BTU is the one you want from sammobile.
Load into the modified version of Odin and flash.

This is what I found, and downloading.

[email protected] said:
This is what I found, and downloading.
Click to expand...
Click to collapse
Yes that's the right one but like the beanvee and i have said there is a specific way to flash this stock then root the device.
You also need Samsung USB drivers installed so your pc can talk to your device, there's plenty of guides around how to flash with Odin and what you need to do beforehand, the only difference with you is the version of Odin your using and then the method of rooting afterwards.

cooltt said:
Yes that's the right one but like the beanvee and i have said there is a specific way to flash this stock then root the device.
You also need Samsung USB drivers installed so your pc can talk to your device, there's plenty of guides around how to flash with Odin and what you need to do beforehand, the only difference with you is the version of Odin your using and then the method of rooting afterwards.
Click to expand...
Click to collapse
Thanks. I have used Odin before, and I already downloaded the patchD version of Odin from the link. Thank you so much. I'll keep you posted on how it turns out. I still do not have a verified version of a custom recovery for this. Do you guys know of any? I found this link but the link to the suggested twrp does not work. I think it is this one. But I can not be sure. The original link points to a slightly different url.

[email protected] said:
Thanks. I have used Odin before, and I already downloaded the patchD version of Odin from the link. Thank you so much. I'll keep you posted on how it turns out. I still do not have a verified version of a custom recovery for this. Do you guys know of any? I found this link but the link to the suggested twrp does not work. I think it is this one. But I can not be sure. The original link points to a slightly different url.
Click to expand...
Click to collapse
Nope do not use that TWRP, it will flash TWRP but not boot it and you'll be stuck on Samsung logo forever.
There is still no way to unlock a Qualcomm snapdragon bootloader and i'm not sure anyone is working on it anymore.
All it means is you need to flash custom Roms via Odin or possibly the inbuilt S7 recovery, you just need to check the ROM is in a format which can be flashed that way.
With regards to finding a TWRP solution you'll have to do some serious searching on google and read everything.
There are already several de-bloated stock Roms on the forum if thats what you want to do. Root and custom recovery TWRP are two different things though, you get rooted so your good to go?

cooltt said:
Nope do not use that TWRP, it will flash TWRP but not boot it and you'll be stuck on Samsung logo forever.
There is still no way to unlock a Qualcomm snapdragon bootloader and i'm not sure anyone is working on it anymore.
All it means is you need to flash custom Roms via Odin or possibly the inbuilt S7 recovery, you just need to check the ROM is in a format which can be flashed that way.
With regards to finding a TWRP solution you'll have to do some serious searching on google and read everything.
There are already several de-bloated stock Roms on the forum if thats what you want to do. Root and custom recovery TWRP are two different things though, you get rooted so your good to go?
Click to expand...
Click to collapse
Yes root is my main goal, and you are right the debloated roms will work just fine. I can do w/o twrp. Just double checking here; since I am flashing the UK rom, and I believe one of the comments on this thread was how US images are locked tighter, would not I be able to find a UK version of TWRP for my phone? Just checking.

[email protected] said:
Yes root is my main goal, and you are right the debloated roms will work just fine. I can do w/o twrp. Just double checking here; since I am flashing the UK rom, and I believe one of the comments on this thread was how US images are locked tighter, would not I be able to find a UK version of TWRP for my phone? Just checking.
Click to expand...
Click to collapse
Now pull up a chair and listen closely.....99% of the American devices (including yours) have an extremely uncooperative Qualcommm Snapdragon cpu at it's heart and thus refuses point blank to play ball. The online community have done a fantastic job creating the modifications you are now using. The rest of the world (i'm happy to say) enjoy the S7 with an extreamly cooperative Exynos cpu at it's heart. It just loves to be fiddled with, it's a whore of a chip, constantly on the go with all kinds of neat tricks.
Anyhoo... my point is, the software has to be compatible with the hardware you catch my drift? All the cool little programs are written with a specific piece of hardware in mind, unfortunately for you guys Qualcomm is the ice queen.

cooltt said:
Now pull up a chair and listen closely.....99% of the American devices (including yours) have an extremely uncooperative Qualcommm Snapdragon cpu at it's heart and thus refuses point blank to play ball. The online community have done a fantastic job creating the modifications you are now using. The rest of the world (i'm happy to say) enjoy the S7 with an extreamly cooperative Exynos cpu at it's heart. It just loves to be fiddled with, it's a whore of a chip, constantly on the go with all kinds of neat tricks.
Anyhoo... my point is, the software has to be compatible with the hardware you catch my drift? All the cool little programs are written with a specific piece of hardware in mind, unfortunately for you guys Qualcomm is the ice queen.
Click to expand...
Click to collapse
Thank you so much. You guys are amazingly patient, and informative. Thank you for educating me, and helping me achieve my goal.

I have tried a few times but can not flash the files. I have attached screenshots, and followed the instructions here. Do you see anything I should be doing differently?
I initially thought the code came as one tar file, which I could flash, but it was a zip file, which I had to unpack.

S8+ g955f stuck at Samsung logo, bad flash

Hey everyone hope you're all well. I have an s8 plus that's not booting. Here's the events that transpired....
My nephew wanted it wiped so I went into recovery and it immediately started to install an update for some reason and wouldn't boot, so I told his brother to flash a stock ROM which he did and booted fine, but with one issue, it showed as 16gb instead of 64gb. At this point I downloaded a pit file and flashed it. I then flashed the stock ROM and it won't get past the Samsung logo.
This is the stock ROM I flashed, AP_G955FXXSADTI1_CL18920278_QB34109287_REV00_user_low_ship_meta_OS9
I'm guessing I need to flash the correct pit file and then the stock ROM?
Any advice would be appreciated
Thanks!

thedan55 said:
Hey everyone hope you're all well. I have an s8 plus that's not booting. Here's the events that transpired....
My nephew wanted it wiped so I went into recovery and it immediately started to install an update for some reason and wouldn't boot, so I told his brother to flash a stock ROM which he did and booted fine, but with one issue, it showed as 16gb instead of 64gb. At this point I downloaded a pit file and flashed it. I then flashed the stock ROM and it won't get past the Samsung logo.
This is the stock ROM I flashed, AP_G955FXXSADTI1_CL18920278_QB34109287_REV00_user_low_ship_meta_OS9
I'm guessing I need to flash the correct pit file and then the stock ROM?
Any advice would be appreciated
Thanks!
Click to expand...
Click to collapse
Flash full firmware not just AP file. Flashing AP file only is more than likely the reason for difference in storage size.
No need for pit file. If it is needed it can be exacted from the firmware that you have downloaded.

I did flash all 4 files not just the ap. I only wanted to show the version etc
Now when I try to flash Odin says failed

What Odin version are you using
What errors in Odin
Can you post a copy of download mode and error in Odin

spawnlives said:
What Odin version are you using
What errors in Odin
Can you post a copy of download mode and error in Odin
Click to expand...
Click to collapse
Absolutely. Odin3 3.13
I've also attached a picture of the rom files. For some reason there's 2 CSC files. I tried using both but same issue.

thedan55 said:
Absolutely. Odin3 3.13
I've also attached a picture of the rom files. For some reason there's 2 CSC files. I tried using both but same issue.
Click to expand...
Click to collapse
1. CSC files
CSC file will wipe all apps and data ( same as out of the box )
HOME_CSC file will keep apps and data
2. The reason Odin is failing is you are trying to downgrade your firmware.
You are on bootloader version 11 the firmware you are flashing is on version 10. You can check in download mode to check bootloader version. There will be a line saying AP SWREV. The number after the letter B is your bootloader number.
Also in download mode down the bottom ( in red ) will tell the reason why it is failing.
You will have to find what firmware was flash before or wait for samsung to upgrade it's bootloader version.

spawnlives said:
1. CSC files
CSC file will wipe all apps and data ( same as out of the box )
HOME_CSC file will keep apps and data
2. The reason Odin is failing is you are trying to downgrade your firmware.
You are on bootloader version 11 the firmware you are flashing is on version 10. You can check in download mode to check bootloader version. There will be a line saying AP SWREV. The number after the letter B is your bootloader number.
Also in download mode down the bottom ( in red ) will tell the reason why it is failing.
You will have to find what firmware was flash before or wait for samsung to upgrade it's bootloader version.
Click to expand...
Click to collapse
I see. The strange thing is that this is the firmware that my nephew flashed after it initially failed and it flashed with no errors. The errors only occurred after I tried to flash the pit file, which I'm guessing was a big mistake.
Right so I need to find a stock ROM with bootloader 11. Is there an indicator in the filename that will tell me the bootloader version?

Why do I get this message every day? Throw the darn thing out already.

thedan55 said:
I see. The strange thing is that this is the firmware that my nephew flashed after it initially failed and it flashed with no errors. The errors only occurred after I tried to flash the pit file, which I'm guessing was a big mistake.
Right so I need to find a stock ROM with bootloader 11. Is there an indicator in the filename that will tell me the bootloader version?
Click to expand...
Click to collapse
Flashing the pit file should only fix the partition size and is generally not needed. Flashing the wrong pit file will cause issues. Doesn't effect the issue of trying to downgrading firmware.
As far I'm aware official samsung firmware is up to bootloader 10. Firmware should be downloaded from official site like sammobile or updato or pc apps like samfirm or frija
In regards to bootloader version ( official firmware ) it can be found in the firmware being downloaded.
Bootloader version will be the fifth number/letter from the right of firmware name.
eg:
G955FXXSADTI1 - A - bootloader version 10. I'm assuming the next bootloader version number will start with B
G955FXXU9DTF1 - 9 - bootloader version 9
The higher the number the higher the bootloader version.
Due to samsung anti róll back bootloader version cannot be downgraded.

Buy your nephew a damn phone

thedan55 said:
I see. The strange thing is that this is the firmware that my nephew flashed after it initially failed and it flashed with no errors. The errors only occurred after I tried to flash the pit file, which I'm guessing was a big mistake.
Right so I need to find a stock ROM with bootloader 11. Is there an indicator in the filename that will tell me the bootloader version?
Click to expand...
Click to collapse
pego99 said:
Buy your nephew a damn phone
Click to expand...
Click to collapse
I did buy him this phone. Just because it's a little messed up right now doesn't mean I should just thrown it out. This entire forum is dedicated to invigorating devices and keeping them going. XDA didn't accept the philosophy of throwing out devices when they can be repaired. I've been here long enough to know that.
Ffs people are still developing for the hp touchpad and m7 Windows devices!
Unsubscribe from this thread mate. Delete your replies so you don't notifications.
There's no need for your unhelpful comments when others are trying to be of assistance.

spawnlives said:
Flashing the pit file should only fix the partition size and is generally not needed. Flashing the wrong pit file will cause issues. Doesn't effect the issue of trying to downgrading firmware.
As far I'm aware official samsung firmware is up to bootloader 10. Firmware should be downloaded from official site like sammobile or updato or pc apps like samfirm or frija
In regards to bootloader version ( official firmware ) it can be found in the firmware being downloaded.
Bootloader version will be the fifth number/letter from the right of firmware name.
eg:
G955FXXSADTI1 - A - bootloader version 10. I'm assuming the next bootloader version number will start with B
G955FXXU9DTF1 - 9 - bootloader version 9
The higher the number the higher the bootloader version.
Due to samsung anti róll back bootloader version cannot be downgraded.
Click to expand...
Click to collapse
Thank you very much for your replies. It's very much appreciated mate.
I did flash the pit file and subsequently got errors in odin. I want aware that I was trying to downgrade. I've download from official site and will try flashing today.
Again thanks for the help. Been a while since I've had to do this lol I think the last device I was rooting and roming was my note 3! The support for it is still going strong though!
Cheers

I guess at some point its best to move on. My grandsons S8 had the digitizer go bad tried to fix unsuccessfully bought him a used on on fleabay for $150.

@spawnlives thank you very much. Phone is back up running perfectly. Appreciate it mate
@pego99 that's a judgment call. Fair enough buying an s8 screen is 100 and new is 150 it would be reasonable to buy a new device. However this was a software issue which costs nothing to fix. Your posts in this thread are redundant and useless.

thedan55 said:
@spawnlives thank you very much. Phone is back up running perfectly. Appreciate it mate
@pego99 that's a judgment call. Fair enough buying an s8 screen is 100 and new is 150 it would be reasonable to buy a new device. However this was a software issue which costs nothing to fix. Your posts in this thread are redundant and useless.
Click to expand...
Click to collapse
OK it costs nothing money wise but time but time is valuable. i.e. If you spend the next 6 months on this has it cost anything? Nope no out of pocket but a lot of time and nephew has no phone to use. BTW If you bought the phone in working condition how did it get screwed up anyway?

pego99 said:
OK it costs nothing money wise but time but time is valuable. i.e. If you spend the next 6 months on this has it cost anything? Nope no out of pocket but a lot of time and nephew has no phone to use. BTW If you bought the phone in working condition how did it get screwed up anyway?
Click to expand...
Click to collapse
It took less than an hour to fix this phone, that's a cost I can stomach.
if you had actually READ the post instead of commenting asinine remarks them you would know how the phone for corrupted in the first place.
Please stop replying to this now.