Hello, I was trying to change my cracked digitizer but after assemble black everything I cannot turn on my K1. I didn´t remove the batery so I suppose that this could be because some fuse has been blow up but I cannot find any info about this. Can anyone help me with this?
Lord_Rafa said:
Hello, I was trying to change my cracked digitizer but after assemble black everything I cannot turn on my K1. I didn´t remove the batery so I suppose that this could be because some fuse has been blow up but I cannot find any info about this. Can anyone help me with this?
Click to expand...
Click to collapse
Finally after a couple of minutes the problems got solved without doing anything closing this thread.
Related
Hey,
I accidently dropped my phone in water a couple of days ago. The backlight doesnt work. Under a really bright light i can see the lock screen and it still functions. Is it possible to replace just the backlight? or what should i do? I dont believe this would be covered from motorola and I live in canada got the phone shipped from the states.
Any advice would be appreciated.
Thanks,
James
I'm guessing you might need a new screen/display. Perhaps do a search and find a repair place you can ship it and get an estimate? I know HTC offers such repairs dirctly (ship the phone, they call you with an estimate). I'd bet Moto does as well if you're not comfortable with 3rd party repair.
aznproto said:
Hey,
I accidently dropped my phone in water a couple of days ago. The backlight doesnt work. Under a really bright light i can see the lock screen and it still functions. Is it possible to replace just the backlight? or what should i do? I dont believe this would be covered from motorola and I live in canada got the phone shipped from the states.
Any advice would be appreciated.
Thanks,
James
Click to expand...
Click to collapse
I have the same problem right now except mine was not dropped in water. In a bright light I can see the lockscreen and also could see the emergency dialer tonight but the keyboard was not reacting on certain buttons either. One screen said to unlock enter your gmail account info,I tried to enter my name and the period symbol(.) was not working for me. I'm thinking maybe the LCD screen needs replaced or the ribbon cable,IDK. Any help is GREATLY appreciated.
Edit: Essentially I finally got logged into the phone and the keys were working fine,the screen was still dim so I turned the brightness all the way up and turned off automatic backlight. I replaced the LCD screen and digitizer and now the phone is not starting for me. I'm about to replace the Flex Ribbon Cable inside the phone and see if this corrects the problem. Right now i cant get the phone to start up so I'm thinking the ribbon cable is disconnected somewhere because it hooks to the motherboard and the LCD or the motherboard is fried. IDK,I'll let everybody know what happens with this project.
lcd not working
PS3AndroidHacker said:
I have the same problem right now except mine was not dropped in water. In a bright light I can see the lockscreen and also could see the emergency dialer tonight but the keyboard was not reacting on certain buttons either. One screen said to unlock enter your gmail account info,I tried to enter my name and the period symbol(.) was not working for me. I'm thinking maybe the LCD screen needs replaced or the ribbon cable,IDK. Any help is GREATLY appreciated.
Edit: Essentially I finally got logged into the phone and the keys were working fine,the screen was still dim so I turned the brightness all the way up and turned off automatic backlight. I replaced the LCD screen and digitizer and now the phone is not starting for me. I'm about to replace the Flex Ribbon Cable inside the phone and see if this corrects the problem. Right now i cant get the phone to start up so I'm thinking the ribbon cable is disconnected somewhere because it hooks to the motherboard and the LCD or the motherboard is fried. IDK,I'll let everybody know what happens with this project.
Click to expand...
Click to collapse
What happen to letting everyone know? Were you ever able to get it going? Was it the flex cable? How did you get the LCD working.
Replaced the flex ribbon cable and it still didnt help anything. Guess its just the phone. I trashed the phone a while ago anyways and am currently running a rooted Droid 4
Sent from my DROID4 using xda premium
Hello,
I recently replaced my digitizer and now i got everything back working but i get no notification leds.
Can it be because of the cheap chinese digitizer i used? or did i disconnect / broke somethine while the phone was open?
Thanks
xeph20 said:
Hello,
I recently replaced my digitizer and now i got everything back working but i get no notification leds.
Can it be because of the cheap chinese digitizer i used? or did i disconnect / broke somethine while the phone was open?
Thanks
Click to expand...
Click to collapse
More than likely you've damaged something while changing the digitizer.
Well i noticed (in the dark) that the LED DOES flash normally but it is blocked by a opaque piece on the digitizer.
There probably is no easy fix for this? i should probably remove the screen again :s and even then it might not be solvable
Hello. I got this Z3 with a broken screen, when I got it it had only black backlight, no image, but the LCD cable on the bottom was cut, so I thought that was why it had no image.
So I replaced the screen with a new one, but the issue remains, no image, only black backlight.
Tried restoring the software with Sony PC companion, updated to latest version, but it didn't help.
The phone boots fine, touch works, I can select options and sometimes I even get audio readouts of what is on the screen, just no image.
Is this a dead motherboard or something else? Because I went through a couple of new screens, none worked, so I'm out of the ideas.
I haven't encountered a case like this before, the screen either works or doesn't, the fact that the touch works and I have backlight puzzles me. No backlight or no touch issues are a common case to me, but this is a new one.
Can someone help here?
Thnx
Same problem....
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
egres said:
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
Click to expand...
Click to collapse
It's a faulty LCD connector on the motherboard, in my case. Not the connector itself but the small jumper just above it, it gives power to the LCD, it was broken off.
I had it resoldered. Works fine now.
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
No image at all, only black backlight ant the touch was responding.
The three square fuses on the bootom of the picture, it's similar in Z3, in my phone one of those was broken off.
Hi guys. I have almost the same problem but inverted. My display and touch is working but i dont have backlight. I can see the screen only if i put light on it.
Maybe u guys have a faulty digitizer responsible for image faulty(no image), better for send repair, flashing new stock firmware will not help
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
GreatVortex said:
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
Click to expand...
Click to collapse
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
Put the motherboard in the oven and bake it for a few minutes, it resold everything, if that's the problem, it will fix it.
For more infos and temperature / time, google it
Same problem here! i have tried new lcd, new flex cable. nathing works, lcd backlight turn on but no image, touch work cause i feel vibration while touching the lcd.
Pleas Helpppp Anyone with the genius mind??????
I'm facing the same problem with my Z3C, a friend of mine told me he applied this method on his phone and it worked but i'm not sure how to do it.
http://www.mobilerdx.com/2015/03/sony-xperia-z3-display-lighting-problem-repair-solution.html
z3 no display but backlight on
by jumperig the fuse near lcd conector it turns on the backlight .There is another fuse surrounding power manager ic which may got open & display ic is not powering.
Im trying to replace the lcd (the whole front panel) on a surface pro 1, and have run into an issue. Its for a friend of mine and it was presented to me with the old front panel removed and the new one kinda slapped in there, Im wondering if anyone has a link to a repair guide for it. Ice done many screens before and it kinda seems like its dead. I have all of the ribbon cables connected and none of them look pinched or damaged. Any help/thoughts would be appreciated. Thanks in advance!!
youdoofus said:
Im trying to replace the lcd (the whole front panel) on a surface pro 1, and have run into an issue. Its for a friend of mine and it was presented to me with the old front panel removed and the new one kinda slapped in there, Im wondering if anyone has a link to a repair guide for it. Ice done many screens before and it kinda seems like its dead. I have all of the ribbon cables connected and none of them look pinched or damaged. Any help/thoughts would be appreciated. Thanks in advance!!
Click to expand...
Click to collapse
Is the glass screen cracked?
XxCyberHackerxX said:
Is the glass screen cracked?
Click to expand...
Click to collapse
well, the original one was, but the replacement isnt. The person who started the project took the old screen off and replaced it with an entirely new one but couldnt get it to come on, so he gave it to me to work on. Ive connected all the ribbon cables and tried rebooting it, but it wont come on. Is there a way of force rebooting it like there is in android? Ive tried holding the power button down for over 30 seconds and it didnt do anything.
youdoofus said:
well, the original one was, but the replacement isnt. The person who started the project took the old screen off and replaced it with an entirely new one but couldnt get it to come on, so he gave it to me to work on. Ive connected all the ribbon cables and tried rebooting it, but it wont come on. Is there a way of force rebooting it like there is in android? Ive tried holding the power button down for over 30 seconds and it didnt do anything.
Click to expand...
Click to collapse
I'm not sure honestly.
I also have a Surface Pro 1 with a cracked screen and would like to replace it.
The cheapest way is to only replace the glass with digitizer http://www.aliexpress.com/item/For-...-Glass-Replacement-Parts-1pc/32368476632.html
I know replacing the whole LCD combo is easier, but is this still doable? For example with this http://www.aliexpress.com/item/100m...ine-to-Splite-Glass-Lens-for/32245814109.html or these http://www.aliexpress.com/item/5ml-...for-Cellphone-Glass-Lens-LCD/32479129528.html tools
Or should I use just use the complete set: http://www.aliexpress.com/item/Free..._78_77_80,searchweb201644_5,searchweb201560_9
And is this the right set to buy when you want to fix a cracked screen on a SP1 128GB
Hello,
First of all i dont know if this is the right forum for my question. If not so please notice me.
After my Z5 dropped on the floor i got an broken Display. I bought a new Display and changed it, but i think i broke the LCD-Flexcable after i pulled carefully on it to get it inside the case. The effect is after phone turn on i get only the backlight but the screen remains black. So for a test i switched my old broken display in it but the effect is the same, only backlight and black screen. After a few seconds the phone led blinks 3 times red and the phone restarts. What the heck is now? Anybody get the same case? I handled the mainboard with care, dont remember to damaged the connector in anyway. Does the Flexcable needs to be protected with a tape so it couldnt be grounded on someway?
Sorry for my bad english. Thanks for any help!
After a second and a third display swap the error is still the same. It seems somehow i damaged the motherboard. I swapped the phone against a new one.
Please help, same problem ...