Database Info

NXT-C900B180 to NXT-L29C432B330 easily

Since a lot of weeks and a lot of bricks I’ve tested this solution. You don’t need an unlocked bootloader or rooted phone, you just have to pay 15€.
Before testing be sure you have the full firmware of your phone to go back if you need so.
You need :
DC-Phoenix
full firmware NXT-L29432B320
15 € credit for www.dc-unlocker.com
You will first use :
DC Phoenix New Account (it costs 15 euros for 15 credits to use for 72h after initial flash (small price to pay compared to sending to repair shop or having a useless brick)
An UPDATE.APP at your choice for your phone (AL10 or L29, both are interchangeable) -
This file with partition rework and factory firmware -*DOWNLOAD*
1. Make sure you have at least 30% of battery.
2. Open DC Phoenix and login with your credentials.
3. Put your phone in fastboot mode (Vol. - + Power).
4. Select «fastboot mode» in DC Phoenix and then go to the «IMG FILES» tab.
5. Select the «NXT-AL10_M00A102_Factory_firmware_Global_Nonspecific_A ndroid_6.0_EMUI_4.0» file and hit Open.
6. Click on «Update» and be patient. This should take 10 minutes.
7. Follow the log on the left. When it says «writing success», reboot your phone (Vol. - and Power until display goes off). The phone should normally boot into a Chinese-like ROM.
This would install a factory firmware, erase all data and re-partition your phone, after that you would be able to install a new ROM.
My phone was mate 8 DL00 3/32Go and was with NXT-C900B180, no update OTA.
8. Put your phone back in fastboot mode and select the «APP FILES» tab in DC Phoenix.
9. Select your UPDATE.APP, from the zip file you've downloaded, and hit Update. Be patient. This may take up to 20 minutes.
10. Again, look at the log for «writing success» line and then reboot your phone.
Now my phone is NXT-L29C432B320 and a new update is immediately available NXT-L29C432B330
Big thanks to djmitza222 who posted THE tuto to unbrick mate 8.
I was looking for a trick to change my international ROM by european one, I’ve tested his post and work's with a full firmware ROM. :silly:
If your phone is bricked see djmitza222's tuto

Just few minutes later I've received NXT-L29C432B560, donwload, install, reboot.
All seem's to be :good:
Whait and see

Hello,
I followed your guide, i'm started from NXT-C900B180 (unlocked) and at the finish I have NXT-C900B320 (!?!).
Where was I wrong? Are you sure that the zip NXT-L29C432B320.zip contains actually NXT-L29C432B320 ?
Thank you

scotty2b said:
Just few minutes later I've received NXT-L29C432B560, donwload, install, reboot.
All seem's to be :good:
Whait and see
Click to expand...
Click to collapse
Hey mate, if you would share your accountname and and pw via PM to me, i could save 15$
Your 15$ code is for 2weeks active - would be nice man!
---------- Post added at 10:07 AM ---------- Previous post was at 10:05 AM ----------
paridao said:
Hello,
I followed your guide, i'm started from NXT-C900B180 (unlocked) and at the finish I have NXT-C900B320 (!?!).
Where was I wrong? Are you sure that the zip NXT-L29C432B320.zip contains actually NXT-L29C432B320 ?
Thank you
Click to expand...
Click to collapse
you need c432b320.zip!
i would appriciate if you got that done you txt me private - so maybe i can save 15$

paridao said:
Hello,
I followed your guide, i'm started from NXT-C900B180 (unlocked) and at the finish I have NXT-C900B320 (!?!).
Where was I wrong? Are you sure that the zip NXT-L29C432B320.zip contains actually NXT-L29C432B320 ?
Thank you
Click to expand...
Click to collapse
Yes I'm sure zip contains NXT-L29C432B320, perhaps you must change oeminfo before, to be EU.
I've done this and after, unroot and install zip file with dc-phoenix.

scotty2b said:
Yes I'm sure zip contains NXT-L29C432B320, perhaps you must change oeminfo before, to be EU.
I've done this and after, unroot and install zip file with dc-phoenix.
Click to expand...
Click to collapse
Thanks scotty2b,
there is a guide i can follow to do that?
I would need also to relock bootloader at the and, 'cause, after that process, device remains unlocked (red color).
Thank you very much!

paridao said:
Thanks scotty2b,
there is a guide i can follow to do that?
I would need also to relock bootloader at the and, 'cause, after that process, device remains unlocked (red color).
Thank you very much!
Click to expand...
Click to collapse
Yes there is a guide (google is your friend ), but after you have unlocked and rooted your phone you just have to use SrkTools and change oeminfo.
See this tuto : How to switch to use stock firmware from other models
at SrkTool prompt use menu 7 and 9, choose mate 8 and eu ( 432 )
Some time you need to do reset factory default after changing oeminfo, just check after modification like test below.
I think your phone don't have vendor info, when you use this code *#*#2846579#*#* and network information query / vendor country info
If all is good you must see :
Vendor Country Info
Vendor: hw
Country: eu
Have a nice day

L09c636b191
Will this method work with L09C636B191 ? Thanks

frugalpov said:
Will this method work with L09C636B191 ? Thanks
Click to expand...
Click to collapse
I think it's possible but you must Choose factory firmware for your phone in phoenix data base :
https://www.dc-unlocker.com/huawei-android-phone-flashing-factory-image
After flashing the factory firmware, all would be erase on your phone (exept oeminf and IMEI, so you must unlock your bootloader, root your phone and change country with SrkTools) and you should flash full firmware for L09 with the country you would like to have.
Flash a firmware just before the new one ( for exemple if the latest is B560 take the full B330 or 320), so you should test if OTA update works fine.
I've only tried the tuto at the top of the thread.

man i did this with dc phoenix and changed my phone from NXT-C900B180 to NXT-L29C432B330 and after i got nougat b581 and i updated and have nougat now my problem is that my bootloader locked again and the previous bootloader code deosnt work my s/n changed from the original one from the box to 123456789ABCEF and in huawei site says when i want to get new bootloader code s/n and imei missmatch also dc unlocker gets bootloader error when i press read bootloader code and with original sn code works but gives me the same and because phone has different s/n says code is not corrent when i try to unlock it via fastboot

nikolas60 said:
man i did this with dc phoenix and changed my phone from NXT-C900B180 to NXT-L29C432B330 and after i got nougat b581 and i updated and have nougat now my problem is that my bootloader locked again and the previous bootloader code deosnt work my s/n changed from the original one from the box to 123456789ABCEF and in huawei site says when i want to get new bootloader code s/n and imei missmatch also dc unlocker gets bootloader error when i press read bootloader code and with original sn code works but gives me the same and because phone has different s/n says code is not corrent when i try to unlock it via fastboot
Click to expand...
Click to collapse
Sorry, I don't know what is happening.
My bootloader was unlocked and after the upgrade with DC Phoenix it was already unlocked.
I've found this :
u can fix it using the HCU tool to repair or reinstate serial/imei but you have to have that information at hand..once done repairing you can proceed to read the bootloader code using the same tool..at fastboot, the phone may already show that bootloader unlocked but all you have to do is unlocking the bootloader again using code received from HCU tool, via fastboot oem unlock XXX.

To go from 900 international to anything but al10 is already free all u have to do is install newer rom with same cust ....

c|nder said:
To go from 900 international to anything but al10 is already free all u have to do is install newer rom with same cust ....
Click to expand...
Click to collapse
How do i do that, flash system, boot and recovery.img using fastboot without reflashing cust?

Stuck with bootloader/eRecovery

Some context:
My MHA-L29C432B138 with TWRP got an OTA update on the phone itself, and I wanted to update (it wanted me to update to B182).
Since I had TWRP replacing the stock recovery I could not flash it through the normal way, so I went ahead to replace TWRP with the stock recovery so I could update.
I was unable to flash the stock recovery since I had no access to flashing in fastboot (FRP Lock, PHONE Unlocked, OEM unlocking option greyed out in developer settings), so I attempted to relock so I could unlock again, hoping that would solve my issue (fastboot oem relock KEY).
By doing this my phone went into a reset, now I'm stuck at FRP Lock, PHONE Relocked, and I can only access the bootloader and eRecovery.
eRecovery is attempting to download updates but fails every time, and I can't use HiSuite to do a system recovery neither (says my device is not supported).
So this is where I'm stuck, any help would be nice!

p3lim said:
Some context:
My MHA-L29C432B138 with TWRP got an OTA update on the phone itself, and I wanted to update (it wanted me to update to B182).
Since I had TWRP replacing the stock recovery I could not flash it through the normal way, so I went ahead to replace TWRP with the stock recovery so I could update.
I was unable to flash the stock recovery since I had no access to flashing in fastboot (FRP Lock, PHONE Unlocked, OEM unlocking option greyed out in developer settings), so I attempted to relock so I could unlock again, hoping that would solve my issue (fastboot oem relock KEY).
By doing this my phone went into a reset, now I'm stuck at FRP Lock, PHONE Relocked, and I can only access the bootloader and eRecovery.
eRecovery is attempting to download updates but fails every time, and I can't use HiSuite to do a system recovery neither (says my device is not supported).
So this is where I'm stuck, any help would be nice!
Click to expand...
Click to collapse
Try to unlock after this.
This does low-level format.
My device: Mate 9 supersu B190 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)

Everything in fastboot (flashing, locking, unlocking) was unavailable, eRecovery was not working, HiSuite said my device was not supported, and dload didn't work neither (tried 3 different firmware versions).
After spending 1-2 hours on Telegram with others I ended up using funkyhuawei with eRecovery, only thing that worked for me.
Last time I buy a Huawei device for sure, their own services don't even work (eRecovery, HiSuite).

p3lim said:
Everything in fastboot (flashing, locking, unlocking) was unavailable, eRecovery was not working, HiSuite said my device was not supported, and dload didn't work neither (tried 3 different firmware versions).
After spending 1-2 hours on Telegram with others I ended up using funkyhuawei with eRecovery, only thing that worked for me.
Last time I buy a Huawei device for sure, their own services don't even work (eRecovery, HiSuite).
Click to expand...
Click to collapse
As I said here, for your case the patched HiSuite method would have worked. But it's too late now, you paid, I was in holidays.. I know it's a shame that HiSuite says unsupported or erecovery not working but you could have made your phone compatible by writing some text in a file and using Lucx's script instead of paying funkyhuawei, their service never worked for me.

dealth645 said:
As I said here, for your case the patched HiSuite method would have worked. But it's too late now, you paid, I was in holidays.. I know it's a shame that HiSuite says unsupported or erecovery not working but you could have made your phone compatible by writing some text in a file and using Lucx's script instead of paying funkyhuawei, their service never worked for me.
Click to expand...
Click to collapse
I'm on the same situation after a ROM installation using HWOTA failed, I don't want to pay $50 to unbrick the phone, could you please give me instructions on how to get this patched hisuite or which file I have to modify?
Thanks!

dealth645 said:
As I said here, for your case the patched HiSuite method would have worked. But it's too late now, you paid, I was in holidays.. I know it's a shame that HiSuite says unsupported or erecovery not working but you could have made your phone compatible by writing some text in a file and using Lucx's script instead of paying funkyhuawei, their service never worked for me.
Click to expand...
Click to collapse
Hi, am on the same situation, could you plz provide detailed steps to patch hisuite am unable to find any lucx's script.

i got my phone bricked like this

I could fix my phone flashing a factory firmware using DC Phoenix (Yes, I have to pay).
I Flash MHA-AL00 first, then I use eRecovery to install the latest stock firmware and finally HCU Client to repair the empty board (IMEI, S/N, MAC, etc).

I had the same then suddenly it is hardbricked no charging no nothing . It was a 1 month old phone. I didnt do anything other than downloading a c636 oreo and i was c185. But i received it trough the system update using firmware finder and even it authenticated itself. Even installed it with no problem. Then suddenly it broke and after soft brick became hard brick nothing. Now it in service centre i hope they can fix it. It is under warranty. pray for me

help me please
i have the same problem what should i do please help

dealth645 said:
As I said here, for your case the patched HiSuite method would have worked. But it's too late now, you paid, I was in holidays.. I know it's a shame that HiSuite says unsupported or erecovery not working but you could have made your phone compatible by writing some text in a file and using Lucx's script instead of paying funkyhuawei, their service never worked for me.
Click to expand...
Click to collapse
Same problem here with Mate 10, can you teach me how to write some text in a file and using lucx's script instead of funkyhuawei? THANKS!

honor 8 bricked bootloop

Hi, I have a honor 8 that bootloops I can only access to fastboot not in bootloader or recovery. Bootloader is locked, i can't flash anything and i can't unlock it because I don't have the Product ID. The dload and three fingers method doesn't work. What can I try to unbrick it? I can't even turn it off.

OG_Winzer said:
Hi, I have a honor 8 that bootloops I can only access to fastboot not in bootloader or recovery. Bootloader is locked, i can't flash anything and i can't unlock it because I don't have the Product ID. The dload and three fingers method doesn't work. What can I try to unbrick it? I can't even turn it off.
Click to expand...
Click to collapse
Which number of firmware you tried via dload??
Which firmware number you were on before issue??

When you say that the dload method doesn't work, what do you get when you try it ? You have to flash the proper firmware for your phone, otherwise it will deny it, you can maybe use a rollback package.

Try the Huawei tool ... U can fix it easily and you can play around don't panic it's the first thing ...

hassanjavaid8181 said:
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
Click to expand...
Click to collapse
I tried one firmware via dload but the phone doesn't even detect anything there isn't any error it just keeps rebooting. The firmware i need to install is FRD-L09C432B131.

Rayan19997 said:
When you say that the dload method doesn't work, what do you get when you try it ? You have to flash the proper firmware for your phone, otherwise it will deny it, you can maybe use a rollback package.
Click to expand...
Click to collapse
i just does nothing. not any errors or loading. The phone just keeps rebooting.

OG_Winzer said:
i just does nothing. not any errors or loading. The phone just keeps rebooting.
Click to expand...
Click to collapse
Maybe you are doing it wrong. As long as you have a stock boot.img and a stock recovery you should be able to use this method.

luisaet82 said:
Try the Huawei tool ... U can fix it easily and you can play around don't panic it's the first thing ...
Click to expand...
Click to collapse
If you mean Hisuite I already tried it. my PC detects the phone and hisuite launches by itself but then doesn't detect any phones. when I try the rescue tool "resuce mode enter..." appears on the screen but then hisuite says that the phone isn't compatible with the rescue mode.

OG_Winzer said:
If you mean Hisuite I already tried it. my PC detects the phone and hisuite launches by itself but then doesn't detect any phones. when I try the rescue tool "resuce mode enter..." appears on the screen but then hisuite says that the phone isn't compatible with the rescue mode.
Click to expand...
Click to collapse
I think he doesn't mean hisuite but Huawei multi-tool, which is available on xda forums and enable to recover from a brick
Envoyé de mon FRD-L09 en utilisant Tapatalk

Rayan19997 said:
I think he doesn't mean hisuite but Huawei multi-tool, which is available on xda forums and enable to recover from a brick
Envoyé de mon FRD-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"

OG_Winzer said:
I tried one firmware via dload but the phone doesn't even detect anything there isn't any error it just keeps rebooting. The firmware i need to install is FRD-L09C432B131.
Click to expand...
Click to collapse
I asked firmware number because you cannot flash lowers firmware number after flashing higher firmware number..
You were on b131??

OG_Winzer said:
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
Click to expand...
Click to collapse
Alright I think this is a good point , now that you can use the dload method you need to know under which EMUI version you were because the phone won't accept a firmware that is lower or to high compared to your actual EMUI version.
What I did when I was in your case is flashing a rollback package downloaded from honor official site and then flash an old EMUI which is under Android 6.x.
After a few tries you can make it, I hope I've been clear, English isn't my native language
An investment in knowledge pays the best interest.
B.Franklin

Rayan19997 said:
Alright I think this is a good point , now that you can use the dload method you need to know under which EMUI version you were because the phone won't accept a firmware that is lower or to high compared to your actual EMUI version.
What I did when I was in your case is flashing a rollback package downloaded from honor official site and then flash an old EMUI which is under Android 6.x.
After a few tries you can make it, I hope I've been clear, English isn't my native language
An investment in knowledge pays the best interest.
B.Franklin
Click to expand...
Click to collapse
Thanks a lot for your help but I don't really know how but while I was trying to go back to the erecovery menu the phone just boot up and it worked. I did a factory reset because the phone was a bit laggy and now it works.

Lol everything's alright then
An investment in knowledge pays the best interest.
B.Franklin

OG_Winzer said:
I tried it too but it didn't work. I tried again the dload method and I achieved to access to EMUI. I tried to recover from wifi but it sayd "getting package info failed" I can now use the dload method but it gives me an error "software install failed"
Click to expand...
Click to collapse
Ok here i go ... Open the Huawei tool ... And follow steps to install TWRP ...turn of the phone , once it's off hold the volume button down then connect the phone to the PC that would take to some type of fastboot ! Flash recovery the 2 option .... Reboot into TWRP .. from the Huawei tool u would see and option of stock i think there u can copy the recovery OEM info system and boot option flash them all one by one .... Reboot the phone ... And you would be redirected to recovery from WiFi and now it would work since u flash the OEM info now the phone knows what to look for u won't get the getting info failed ... And that's it just makes sure u have a good stable WiFi connection ...
And like a said the more calm and relax u do these the better the first time I screw the phone I almost get a heart atack :crying: it's easy

Unable to get Product ID - Honor 8
hassanjavaid8181 said:
Which number of firmware you tried via dload??
Which firmware number you were on before issue??
Click to expand...
Click to collapse
My Honor 8 broke after it downloaded and installed the very first update. Since the failed 'update' I am NOT able to access Android at all. The phone was stuck on the Huawei eRecovery screen which fails to connect via wi-fi and is unable to connect or retrieve any information from the server to update and repair the phone. I was able to use a 'roll-back' package and install the stock firmware (FRD-AL10), but since I have done the roll-back and restored the stock firmware the phone boots to the first screen where you select your 'Region', then the 'Language', WiFi connection, Agree to the Terms & Conditions, then skip the following steps for Cloud and something else - after all this it goes back to the 'REGION' selection screen, then again the Language selection screen and so on - it just loops and never boots into Android.
Thus I am unable to get the Product ID, the unlock code, etc.
The phone is still locked and UNrooted as all the other solutions rely on the phone being UNlocked and Rooted - but since I DON'T have access to Android I cannot do anything with the phone.
Can someone help me to retrieve the Product ID from an essentially 'DEAD' Honor 8 phone??
---------- Post added at 06:47 PM ---------- Previous post was at 06:38 PM ----------
OG_Winzer said:
Thanks a lot for your help but I don't really know how but while I was trying to go back to the erecovery menu the phone just boot up and it worked. I did a factory reset because the phone was a bit laggy and now it works.
Click to expand...
Click to collapse
I have followed this 'dload' process to load the stock 'FRD-AL10 - ...C00B135' onto my Honor 8, it completes successfully then the phone reboots to where I have to select the Region, then Language, then WiFi, then agree to the Agreement, etc.. then the phone 'loops' back to the Region, Language, WiFi, selection and everything from start.
Is there a way to get past this 'loop' to the point where the phone actually boots into Android?? I cannot access the Product ID, unlock or root the phone.
Any help will be appreciated, thanks.

"Your device has failed verification..." after Firmware Finder update [SOLVED]

"Your device has failed verification..." after Firmware Finder update [SOLVED]
Hello to everyone!!
I have a problem with my Honor 8, it is the FRD-L09 model firmware B394.
I installed Firmware Finder from Playstore and tried to downloaded the B402 version, it downloaded a lot of packages ota and then tried to install the update without success.
After that, when I turn on the phone, there is this message. If I push the power button the phone starts.
I don't know if it can be useful but if I go into fastboot mode the phone says: phone unlocked and frp locked, but I haven't unlock the bootloader. The phone is new, purchase from the honor site.
Thank you in advance!!
EDIT: I was able to resolve the problem with the rollback guide of huawei, flashing MM via dload!!

When you update with FF, I recommend to use the change DNS thing. Just for the future.

Days Tech said:
When you update with FF, I recommend to use the change DNS thing. Just for the future.
Click to expand...
Click to collapse
I used that option, I did this before on the honor of my friend without issues. I don't understand what happened

xxfraxx said:
I used that option, I did this before on the honor of my friend without issues. I don't understand what happened
Click to expand...
Click to collapse
You can try to reinstall EMUI on it. There is a guide called "back to emui from custom roms", which requires the openkirin twrp, though. Anyway, did you check that you have firmware access with IMEI?

Days Tech said:
You can try to reinstall EMUI on it. There is a guide called "back to emui from custom roms", which requires the openkirin twrp, though. Anyway, did you check that you have firmware access with IMEI?
Click to expand...
Click to collapse
Yes, I checked it before start the update
EDIT: Can I use the restore option into Hisuite?

When using either option, in System Update press the 3dot menu and select full package. This will download one large update rather than the multiple OTA files.

linkazoid said:
When using either option, in System Update press the 3dot menu and select full package. This will download one large update rather than the multiple OTA files.
Click to expand...
Click to collapse
I will do that, thanks!!
There is no way to fix this problem?
EDIT: I was able to resolve the problem with the rollback guide of huawei, flashing MM via dload!!

xxfraxx said:
Hello to everyone!!
I have a problem with my Honor 8, it is the FRD-L09 model firmware B394.
I installed Firmware Finder from Playstore and tried to downloaded the B402 version, it downloaded a lot of packages ota and then tried to install the update without success.
After that, when I turn on the phone, there is this message. If I push the power button the phone starts.
I don't know if it can be useful but if I go into fastboot mode the phone says: phone unlocked and frp locked, but I haven't unlock the bootloader. The phone is new, purchase from the honor site.
Thank you in advance!!
Click to expand...
Click to collapse
Typically you get this problem when you install an update without locking the bootloader.. This happened with me couple of weeks back.. I think happens, cos during the process of the update the bootloader gets locked, but it doesnt come up on the fastboot (donno why)
I just unlocked the bootloader using the OEM code and voila it worked... I was able to get ride of this message as well as root the phone.. Do try and let me know!

@kishorev
have you asked OEM code from huawei site?

Hnktc said:
@kishorev
have you asked OEM code from huawei site?
Click to expand...
Click to collapse
Yes the bootloader unlock code..

I need to rollback (Honor 8), HELP!

I have a seemingly stupid but still annoying problem. As many of you know Android 8 + EMUI 8 came out this summer and I have updated my Honor8. Everything works well, even better (especially with regard to the battery) apart from a problem, quite annoying. I have seen that everyone around complains about the same problem, so it is clear that both a build bug and not a local problem.
Basically ... the bluetooth link with the multimedia system of my car doesn't work as it should, while it worked well with the 7.0.
Tracknames, music infos disappears, sometimes it connects regularly, starting the music, sometimes nothing happens, sometimes the music passes from the car speakers to smartphone (!!)... in short, manage the music in the car It has become a big problem!
I tried all possible options; reset pairing, reset bluetooth, clear cache, activate the developer options to control some low-level aspects of bluetooth, and finally installed Bluetooth Auto Connect which also has several advanced options. Nothing works. In the meantime an update of 8.0 has been released (mine is the buiold 521). The update came out in September ... maybe (MAYBE) this update fixes all bluetooth issues (but i don't have any detailed info about). Until today I have not received any updates and normally I check new version regularly every day. At this point I decided to return to Nougat!
And here the adventure begins!
I CANNOT IN ANY WAY do the downgrade.
What I tried:
- through HiSuite. The "back to previous version" option appears random (rarely); normally the program tells me "the system is up to date". Once appeared I tried to run the procedure, but after the decompression it gives me an error "error updating".
- by standard Rollback procedure. Using a microSD and putting the full version of Nougate in the dload folder. The installation starts but stops almost immediately with the same "update cannot be applied" error.
At this point I am desperate. I cannot update Oreo, I can't go back to Nougat and meanwhile the bluetooth still doesn't work with my car. Remember that before Oreo, everything worked very well!
What can I do? Can you help me?
Thank you

hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8

m2relax said:
hi / i can help u / pls say me this:
your region(Ru/Eu/Cn.......)
your model( FRD-L09/L19/L04........)
Your Build number
and which build you upgrade to emui 8
Click to expand...
Click to collapse
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .

Thelothian said:
Region: EU
Model: FRD-L09
Build: 8.0.0.521 (C432)
Previous Build: don't remember. It was Nougat, and I've upgraded around the first week of September. From that day I haven't received/applied any patch, because nothing appears until now.
This morning I've tried again with HiSuite. As usual it says I'm running the latest version and it doesn't offer any downgrade option .
Click to expand...
Click to collapse
dont worry/ do u change region of your phone past?

m2relax said:
dont worry/ do u change region of your phone past?
Click to expand...
Click to collapse
Never. And never jailbroken or rooted...

Thelothian said:
Never. And never jailbroken or rooted...
Click to expand...
Click to collapse
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:

m2relax said:
ok / pls do this work step by step :
1-Get Unlock Code for your Phone
2-Unlock your phone with Unlock Code
3-install TWRP recovery
4-after install TWRP notice me to send a file for u ( u must flash it from recovery TWRP )
5-after flashing u most install recovery stock
6-End and your problem is done! :fingers-crossed:
Click to expand...
Click to collapse
I Heard TWRP doesn't work well on Oreo...

CurlyApple said:
I Heard TWRP doesn't work well on Oreo...
Click to expand...
Click to collapse
no if you use multi tools 8 for install twrp its work perfectly on oero

m2relax said:
no if you use multi tools 8 for install twrp its work perfectly on oero
Click to expand...
Click to collapse
The more you know...

Finally I've decide to try updating to 8.0.0.562. After a month of tries, fails (damn Huawei and his stupid update system), errors and a lot of other stupid things, I was finally able to update my Honor hoping the latest version will fix all the problems. It was a enormous waste of time (searching around internet)... but in the end I found a method described here: https://forum.xda-developers.com/huawei-p20-pro/help/p20-pro-bricked-t3868085#4And if you go ahead you should find the correct firmware link (on a Russian site). Although, IMHO, failing with the classic method was due to the impossibility or some bugs in the update system, to unpack the update files on sdcard. So the solution seems to be to leave both the zip and the unpacked folder.The problems with bluetooth remain, but I hope that now there is not to be crazy applying next updates. ATTENTION: the method above is NOT valid for rollback! If you try, you'll brick your Honor.
And finally I've taken an important decision... for me this is the last Huawei/honor device. Next time I'll go to another brand, with a serious update system.

Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks

scseke said:
Hello,
I have the same problem whit my honor, bluetooth lost signal random times, and my battery is faster get low, on android 7 i dont feel thees problems. Anyone have an idea how can i downgrade to nougat or marshmallow? My phone infos:
-FRD-L09 8.0.0.521(C432), I bought it in Hungary (i think its an EU modell), the phone have an unlocked bootloader, and flashed whit TWRP recovery
Who know the solution, pls reply here or, write me an email. Big thanks
Click to expand...
Click to collapse
flash this file with twrp and install stock recovery and do reset factor / finally use hisuite to rollback