@audioralf (thanks to him!!!) did test many roms on the X2, and conclude that B202 from march 6th 2017 is "it's the only x2 firmware will full push notifications support and fixed GPS", I think he was speaking about android 6 firmware only.
About those two issues:
- push notifications seem to be killed in background after a while for apps like whatsapp. (reported on any model ?)
- GPS need to reboot once in a while, to be sure that it localize the device well. Note that all devices are concerned (but as far as I remember, we didn't spot which model is more concerned; 701L, 702L, 703L)
--
I'm wondering if those two issues are really observed by users that did install other very new firmwares:
- B212 Kangvip Slim V3 (september 2017)
- B205 (august 2017)
- B212 Kangvip V3 (july 2017)
- CyanogenMod 13 (march 2017)
- C158B203 (december 2016)
- C209B203 (november 2016)
----
I'll update below, any feedback given :
@Phna , device=703L, rom=B212 Kangvip V2, issues=none
@E--Man, device=703L, rom=B212, issues=push, GPS
@Steamer2499, device=703L, rom=CM13, issues=GPS
@Steamer2499, device=703L, rom=B202 simply international, issues=GPS
@Steamer2499, device=703L, rom=B212, issues=GPS
@Steamer2499, device=703L, rom=B212 Kanvip V3 Slim, issues=GPS
@Steamer2499, device=703L, rom=B205 Simply International, issues=GPS
@Germano1980, device=703L, rom=B205beta , issues=none
@Germano1980, device=703L, rom=CM13, issues=none
@Germano1980, device=703L, rom=B212 Kangvip V3, issues=none
@Djiban, device=702L, rom=B205, issues=none
@Djiban, device=702L, rom=B212 V3 kangvip slim, issues=none
@shaolin95, device=702L, rom=B202 march 2017, issues= GPS
@shaolin95, device=702L, rom=CM13, issues= GPS
@shaolin95, device=702L, rom=B212 Kanvip V2, issues= GPS
@shaolin95, device=702L, rom=B212, issues= GPS
@shaolin95, device=703L, rom=B212 , issues=none
@shaolin95, device=702L, rom=B212 Kanvip V3 Slim, issues=GPS
@RayfG, device =702L, rom =CM13, issues=none
@durv, device=703L, rom=CM13, issues=none
@audioralf, device=701L, rom=B202, issues=push, GPS
@audioralf, device=701L, rom=C158B203, issues=push, GPS
@audioralf, device=701L, rom=B202 march 2017, issues=none
@audioralf, device=701L, rom=B212 Kangvip V3 Slim, issues=none
@audioralf, device=701L, rom=B205 Simply International, issues=none
@growbag , device=701L, rom=B212 KangvipV3 Slim, issues=none
----
The goal is to be sure about the more advanced and stable rom for the X2 in general, including the less "non-working" features.
Thanks for feed back
I'm going back to version 2 at the moment, since I hate the yellow page happens in dialer, when I dial a phone number.
- For the push notifications, I am really happy if it's block those chat apps (I don't use whatsapp actually), however facebook messenger is working no problem, another reminder app called life reminder is fine as well. I just add it in Phone manager in battery section.
- GPS is working fine for the moment, I don't need to restart.
Sent from my GEM-703L using Tapatalk
Some news from another thread:
E--man said:
B212 Stock:
my critical apps such as email are not waking up the device for push notifications even though they are set to "Protected" and to "Ignore Battery Optimizations". The only apps which seems to be able to wake up the device is WhatsApp and my Alarm Clock (Alarm Clock xTreme) and the standard SMS Messaging / calls. The notifications immediately arrive either when I wake up the device manually or if a SMS comes in waking up the device; either way, the device needs to be woken up manually by something for the notifications to come through. It seems as if the device is going into some sort of deep sleep and doesn't wake up.
Click to expand...
Click to collapse
Steamer2499 said:
cm13.: Push notifications works good for me on all apps... GPS still falls asleep but after several reboots it seems to stay awake until a reboot, then the cycle starts again
Click to expand...
Click to collapse
still from the same thread:
Steamer2499 said:
I went back 2 b202 and GPS would fall to sleep from a couple of hours to maybe 12hrs on my l703... Same with kangvip v3
Click to expand...
Click to collapse
I had problems with notifications and GPS in ROMs prior to B205, in fact, the B205 was the best in this area, because I did not need the build.prop for the GPS to work perfectly. The later ones worked fine by editing build.prop (for GPS) and the notifications never gave a problem. But I've had problems too often for the Google account to work and the supersu asking to update the binary with each reboot. Other than that, all ok. Now, the only problem I'm having is with CM13, of incompatible apps. I really like this device, a pity that has fallen into oblivion.
Djiban said:
@audioralf (thanks to him!!!) did test many roms on the X2, and conclude that B202 from march 6th 2017 is "it's the only x2 firmware will full push notifications support and fixed GPS", I think he was speaking about android 6 firmware only.
About those two issues:
- push notifications seem to be killed in background after a while for apps like whatsapp. (reported on any model ?)
- GPS need to reboot once in a while, to be sure that it localize the device well. Note that all devices are concerned (but as far as I remember, we didn't spot which model is more concerned; 701L, 702L, 703L)
--
I'm wondering if those two issues are really observed by users that did install other very new firmwares:
- B212 Kangvip V3 (july 2017)
- B212 Kangvip Slim V2 (April 2017)
- CyanogenMod 13 (March 2017)
- various B203 (november-december 2016)
The goal is to be sure about the more advanced and stable rom for the X2 in general, including the less "non-working" features.
Thanks for feed back
Click to expand...
Click to collapse
What is the installation procedure to install the b202 March 2017 version? It was AJ's international slim b202 I installed.... Will my phone still be rooted and unlocked?
To install march 2017 B202, start on a device already regognised as a 702L (if you have a true 702L, or if you install a 702L huawei rom like the taiwan B203), just run the huawei firmware finder android app:
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
You might have to reroot after.
You can also try to download the rom by yourself:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v78383/f1/full/update.zip
And install it with dload and force update (restart with 3 buttons pushed). But that is not sure it will install.
Djiban said:
To install march 2017 B202, start on a device already regognised as a 702L (if you have a true 702L, or if you install a 702L huawei rom like the taiwan B203), just run the huawei firmware finder android app:
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
You might have to reroot after.
You can also try to download the rom by yourself:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v78383/f1/full/update.zip
And install it with dload and force update (restart with 3 buttons pushed). But that is not sure it will install.
Click to expand...
Click to collapse
I'm on Kangvip b212 V3 at the moment. My phone is the 703L... What would be the best way to install "march 2017 B202" on my device? A simple installation guide would be awesome...
Steamer2499 said:
I'm on Kangvip b212 V3 at the moment. My phone is the 703L... What would be the best way to install "march 2017 B202" on my device? A simple installation guide would be awesome...
Click to expand...
Click to collapse
first of all try out this solution for push notifications on your kangvip B212 V3:
https://forum.xda-developers.com/showpost.php?p=72221053&postcount=1565
-----------------
to install 6th March 2017 B202, please see the dedicated post in the B202 thread. Thx
to install 6th March 2017 B202, please see the dedicated post in the B202 thread. Thx
Djiban said:
first of all try out this solution for push notifications on your kangvip B212 V3:
https://forum.xda-developers.com/showpost.php?p=72221053&postcount=1565
-----------------
to install Marsh 2017 B202, did you try to download:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v78383/f1/full/update.zip
and install it by putting the file in dload folder on sd external card, and start the phone by pushing the three buttons? (you'll have to have the stoc recovery on recovery1 partition of your device, see http://forum.xda-developers.com/showpost.php?p=70225356&postcount=248 )
?
------------------------
If it doesn't work, you'll have to "turn" your device into a 702L, by using the dload method with this downgrade script:
http://consumer.huawei.com/tw/tablets/support/downloads/detail/mediapad-x2-tw.htm?id=81363
now your device is recognised as a 702L, you can then try huawei firmware finder:
https://www.youtube.com/playlist?list=PLgw3d3fHTj5E33lNsLcCwcgoraZmfin7V
Click to expand...
Click to collapse
Thanks man... Gonna give this a try...
Djiban said:
first of all try out this solution for push notifications on your kangvip B212 V3:
https://forum.xda-developers.com/showpost.php?p=72221053&postcount=1565
-----------------
to install Marsh 2017 B202, did you try to download:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v78383/f1/full/update.zip
and install it by putting the file in dload folder on sd external card, and start the phone by pushing the three buttons? (you'll have to have the stoc recovery on recovery1 partition of your device, see http://forum.xda-developers.com/showpost.php?p=70225356&postcount=248 )
?
------------------------
If it doesn't work, you'll have to "turn" your device into a 702L, by using the dload method with this downgrade script:
http://consumer.huawei.com/tw/tablets/support/downloads/detail/mediapad-x2-tw.htm?id=81363
now your device is recognised as a 702L, you can then try huawei firmware finder:
https://www.youtube.com/playlist?list=PLgw3d3fHTj5E33lNsLcCwcgoraZmfin7V
Click to expand...
Click to collapse
Not sure what to do. I'm now on AJ's International b202 8-4-16.... His new International b202 5-20-17 gets stuck at boot. I saw if you can install the stock b202 then the b202 5-20-17 will boot after installation... My problem is, i can't remember how to install stock b202 and the procedure to do this... Any help would be much appreciated!
Steamer2499 said:
Not sure what to do. I'm now on AJ's International b202 8-4-16....
Click to expand...
Click to collapse
What is your device, a 702L? 703L ?
Steamer2499 said:
His new International b202 5-20-17 gets stuck at boot. I saw if you can install the stock b202 then the b202 5-20-17 will boot after installation...
Click to expand...
Click to collapse
@audioralf , do you confirm this? I thought the "5-20-17 Simply international B202" was useless?
@Steamer2499 : if your refer to this post as a source, audioralf was speaking there about "6th march 2017 B202" and not "20th may 2017 Simply international B202"".
Steamer2499 said:
My problem is, i can't remember how to install stock b202 and the procedure to do this... Any help would be much appreciated!
Click to expand...
Click to collapse
0) make an nandroid backup of your today's ROM
1) be sure to have the stock recovery installed on recovery1 partition: http://forum.xda-developers.com/showpost.php?p=70225356&postcount=248
2) download https://forum.xda-developers.com/showpost.php?p=72221053&postcount=1565 , put the files into dload folder of your external SD card, and start device with 3 buttons pushed
3) if it doesn't work, run huawei firmware finder app and change the model of your phone in it, into 702L
4) if it doesn't work, if your phone is not a 702L turn it into 702L by dload flashing this . Then, when your phone is recognised as a 702L , use huawei firmware finder to incremental installs until install march 2017 B202
Djiban said:
What is your device, a 702L? 703L ?
@audioralf , do you confirm this? I thought the "5-20-17 Simply international B202" was useless?
@Steamer2499 : if your refer to this post as a source, audioralf was speaking there about "6th march 2017 B202" and not "20th may 2017 Simply international B202"".
IT seems, your goal is to have the GPS and notifications sure to work for any apps. There si no "Simply international B202 ROM" that does that at the moment (until this I guess), so you should post to the dedicated thread to your goal there, that will be useful for people like you, and less off-topic here. Thanks
Click to expand...
Click to collapse
AJ's "Simply international B202 ROM" date 5-20-17 was based off the "6th march 2017 B202 ROM".
I did change my above answer while you were posting, giving you some ways to install march 2017 B202, please have a look
Steamer2499 said:
AJ's "Simply international B202 ROM" date 5-20-17 was based off the "6th march 2017 B202 ROM".
Click to expand...
Click to collapse
And this simply international don't boot by itself, as far as I know. Audioralf told that he had to do some internal changes to make it boot (but xposed issues still occur). But if it boots when installed on march2017 Stock B202, that's great.
Simply international was based on that marcg 2017 rom, but never booted. AJ gave up, because he had no device for testing. So send him yours.
My device: Mate 9 supersu B190 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Simply international was based on that marcg 2017 rom, but never booted. AJ gave up, because he had no device for testing. So send him yours.
My device: Mate 9 supersu B190 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
I would but I need a phone...lol
---------- Post added at 09:11 PM ---------- Previous post was at 09:03 PM ----------
Djiban said:
What is your device, a 702L? 703L ?
@audioralf , do you confirm this? I thought the "5-20-17 Simply international B202" was useless?
@Steamer2499 : if your refer to this post as a source, audioralf was speaking there about "6th march 2017 B202" and not "20th may 2017 Simply international B202"".
0) make an nandroid backup of your today's ROM
1) be sure to have the stock recovery installed on recovery1 partition: http://forum.xda-developers.com/showpost.php?p=70225356&postcount=248
2) download https://forum.xda-developers.com/showpost.php?p=72221053&postcount=1565 , put the files into dload folder of your external SDS card, and start device with 3 buttons pushed
3) if it doesn't work, run huawei firmware finder app and change the model of your phone in it, into 702L
4) if it doesn't work, if your phone is not a 702L turn it into 702L by dload flashing this . Then, when your phone is recognised as a 702L , use huawei firmware finder to install march 2017 B202
Click to expand...
Click to collapse
"be sure to have the stock recovery installed on recovery1 partition"...Where can I get stock recovery? Tutorial? I've have forgotten how to do this... sorry, I do appreciate your help.
audioralf said:
AJ gave up, because he had no device for testing. So send him yours.
Click to expand...
Click to collapse
https://forum.xda-developers.com/mediapad-x2/general/providing-ajsmsg78-x2-device-to-custom-t3638591
Steamer2499 said:
"be sure to have the stock recovery installed on recovery1 partition"...Where can I get stock recovery? Tutorial? I've have forgotten how to do this... sorry, I do appreciate your help.
Click to expand...
Click to collapse
1) use huawei update extractor to get the recovery.img from the installation .zip file of the rom you use at the moment.
2) download a twrp recovery suited for your version of android:
https://www.androidfilehost.com/?w=files&flid=168446
3) connect your device in fastboot mode, to a computer with ADB installed. Copy the .img file in the ADB directory
4) run those ADB commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 TWRP-ENG-6.0.img
now you can flash with the officiaql dload method Huawei ROMs. And you can also boot in TWRP recovery mode if you pug your device in USB before start it with "Power" and "Vol +" pushed
Djiban said:
https://forum.xda-developers.com/mediapad-x2/general/providing-ajsmsg78-x2-device-to-custom-t3638591
1) use huawei update extractor to get the recovery.img from the installation .zip file of the rom you use at the moment.
2) download a twrp recovery suited for your version of android:
https://www.androidfilehost.com/?w=files&flid=168446
3) connect your device in fastboot mode, to a computer with ADB installed. Copy the .img file in the ADB directory
4) run those ADB commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 TWRP-ENG-6.0.img
now you can flash with the officiaql dload method Huawei ROMs. And you can also boot in TWRP recovery mode if you pug your device in USB before start it with "Power" and "Vol +" pushed
Click to expand...
Click to collapse
Thank you again! I will take a look at this...
I added GEM-702LC209B205 (august 1st 2017) to post #1 's "new" roms
Related
Hi folks
Here for you the initial stage of porting progress of TWRP for Huawei P8 Lite 2017 and similar phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
[/QUOTE]
Downloads
from basketbuilds:
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
How to Backup Your Firmware:
Reboot to TWRP by press on Vol up .
Go to Mount.
Uncheck the following partitions: Cache, Data & System.
Back to main menu and click on Backup, choose all partitions and swipe to start backup firmware to sdcard then.
Installation Guide:
download the latest image.
rename to recovery.img.
now reboot to fastboot mode by connecting the phone to the usb and press power + vol down.
now run the command: fastboot flash recovery recovery.img && fastboot reboot.
Install Root/SuperSu Permissions:
Download the edited SuperSu for Emui 5.0 from AndroidFileHost .
Reboot to recovery by power + vol up (make sure is not connected to usb port).
Go to Install.
Choose SuperSU-v2.79-201612051815-EMUI5.0.zip.
Use Swipes to install the package.
Once installation is terminated, tab on Reboot.
Your device will bootloop for only one time so don't panic, could take some time.
You should see SuperSu between apps then.
Works
Recovery.
Backing up images is done without problems not like Revolution recovery that I get many errors failed errors.
Wipes.
Both Internal & External sdcard.
Restore.
XDAevDB Information
TWRP for the Hauwei P8 Lite 2017 and similar variants
Contributors
@haky 86
Source Code:
device tree: https://github.com/hak86/android_device_huawei_prague
kernel GPL: https://github.com/hak86/android_kernel_huawei_prague
Version Information
Status: Stable
Created 2017-19-04
Last Updated 2016-19-04
Click to expand...
Click to collapse
Reserved
Reserved
Please do not quote
Will be released once I fix mounting issue.
Great , thanks a lot man
Great NEWS!!! Thanks a lot man!
Great thanks man!!
like others : great news !!!! and thank you
I almost done with it. keep in touch
haky 86 said:
I almost done with it. keep in touch
Click to expand...
Click to collapse
You are the king ?? waiting for it.
Reserved
-First beta has been released.
-Wipes should be fine.
-Backups is working (will be useful to backup your original firmware and save a copy on the computer).
-I will try to fix mounting internal and external storage bug.
-I'm not responsible for any damage caused by recovery.
Thanks for understanding
haky 86 said:
-First beta has been released.
-Wipes should be fine.
-Backups is working (will be useful to backup your original firmware and save a copy on the computer).
-I will try to fix mounting internal and external storage bug.
-I'm not responsible for any damage caused by recovery.
Thanks for understanding
Click to expand...
Click to collapse
Now can we flash SuperSU?? ?
peerpower said:
Now can we flash SuperSU??
Click to expand...
Click to collapse
I didn't try yet, will do a test once back to home.
haky 86 said:
I didn't try yet, will do a test once back to home.
Click to expand...
Click to collapse
Ok waiting for you lol )
Reserved
Release v2 of TWRP.
Please read the "change logs".
For install this twrp is necessary the bootloader unlocked?
sbarbi said:
For install this twrp is necessary the bootloader unlocked?
Click to expand...
Click to collapse
Yup, I'm gonna to make separate topic to unlock and root this phone and perhaps found a way how to reinstall the original firmware
Edit: will just update the topic to not create confusions.
haky 86 said:
Yup, I'm gonna to make separate topic to unlock and root this phone and perhaps found a way how to reinstall the original firmware
Edit: will just update the topic to not create confusions.
Click to expand...
Click to collapse
Pls share in here if you create another topic
peerpower said:
Pls share in here if you create another topic
Click to expand...
Click to collapse
Topic updated, please report :=)
haky 86 said:
Topic updated, please report :=)
Click to expand...
Click to collapse
WORKS PERFECTLY!!!!! JUST ROOTED YOU ARE THE KING:good::good::good::good:
---------- Post added at 06:28 PM ---------- Previous post was at 06:10 PM ----------
haky 86 said:
Topic updated, please report :=)
Click to expand...
Click to collapse
hey my friend i have one last question. Just downloaded fullota package.
Can i flash it with your twrp?
Thanks in advance for everything
And can you also please share stock recovery.img ? Just in case you know
peerpower said:
WORKS PERFECTLY!!!!! JUST ROOTED YOU ARE THE KING:good::good::good::good:
---------- Post added at 06:28 PM ---------- Previous post was at 06:10 PM ----------
hey my friend i have one last question. Just downloaded fullota package.
Can i flash it with your twrp?
Thanks in advance for everything
And can you also please share stock recovery.img ? Just in case you know
Click to expand...
Click to collapse
great!
I don't recommend to flash stock ota via twrp. I will upload 3rd build of twrp with some modification to the partitions that our device don't have.
haky 86 said:
great!
I don't recommend to flash stock ota via twrp. I will upload 3rd build of twrp with some modification to the partitions that our device don't have.
Click to expand...
Click to collapse
Yes but I believe if i flash stock recovery back I can easily update ota or install fullota. Am I correct?
Where we can get stock recovery ????
This ROM can not be installed on Android 6.
The "way back" to EMUI 4 goes by official rollback.
[Custom ROM] [K-ROM V.2] Honor 6x (Berlin) BLN-L21C432B360 - EMUI 5 -Android 7
Based on Huawei firmware C432B360 and HRT_Kangvip B357.
My ROM has been developed and tested on this device:
Huawei Honor 6x - Premium - [BERLIN]
Model number: BLN-L21
EMUI 4 build number: NRD90M test-keys
EMUI 5 build number: BLN- L21C432B360
-OTA updated Free device, without branding, with root and TWRP Recovery 3.1.1
The following mods were integrated and activated:
- Autostart administration in the phone manager
- Call Recorder
- KangVip Advanced Settings
Should extensions or Xposed be added, will be updated immediately.
Whether the following instructions on Provider Branding is applicable,
I could not test and therefore advise against it.
The Rom was installed successfully on BLL-L21C185B361 (Middle East) from @--ahmed.
You need:
- PC or Windows tablet
- USB cable
- Windows 7 / 8.1 / 10
- Minimal Adb and Fastboot
- OEM unlocking active in the developer options
- Huawei HiSuite (installs all necessary drivers)
- USB debugging on. Back up your data using Huawei Backup.
The Rom is installed as if you wanted to restore a TWRP backup.
Before the ROM installation, please create a TWRP 3.1.1 backup for emergencies !!
Conditions for installation:
The firmware EMUI 5 / B360 (nougat) must be preinstalled. My ROM can not be installed on Android 6. Root is not necessary.
TWRP Recovery 3.1.1 (berlin311.img) is required.
OEM + FRP unlocked.
OEM Unlock and USB on in phonesettings.
TWRP installation is described here:
https://www.android-hilfe.de/thema/...test-keys-android-7-0-nougat-emui-5-0.834824/
The compressed file contained in the download package
2017-06.system.update.B360.k.rom.v.2.rar (1,008.1 MB) please unzip (do not download as zip). The backup file created in this way
2017-06.system.update.B360.k.rom.v.2 please copy to the ExtSd in the TWRP backup folder.
Installation:
Please do not make wipes. Do not delete the cache or dalvik cache. Also no other partition and also no Factoryreset to perform. Later, this is feasible.
In TWRP now my backup restore and reboot.
All partitions; lease do not part recovery.
Your applications, with data and settings, are retained.
If TWRP wants to root, please refuse the request.
Now the ROM installation is complete. An additional installation of SuperSu and BusyBox is not necessary. Both were integrated And configured. There are comprehensive reading and writing rights.
The ROM is partially debloated. Some Google Apps have been removed. They can be installed by you if necessary. You can do that, too Do well with the HiApp.
Please make regular backups. ...... and remember: A custom ROM is Never as perfect as a stock Rom. He has to teach him something.
Never update the app from SuperSu. If it does happen, immediately the app delete and install the SuperSu App from the download package.
Should you ever make a Factoryreset, updated before that Google Account.
Root, K-Settings and the OTA update capability will remain thereafter.
The Rom is to be used very well as a Rescue System. Because it has no data partition, it provides independently a new in the boot process , one if none exists.
Have fun ! I hope my bad English is clear enough. Sorry!
Download Package:
- 2017-06.system.update.B360.k.rom.v.2.rar
- berlin311.img - TWRP Recovery
- eu.chainfire.supersu.apk
- minimal_adb_fastboot_v1.4_setup.exe
Big thanks to: HRT_Kangvip,
@OldDroid, Chainfire, Stephen (Stericson) + Jmz Software, Team Win Recovery Project, and Huawei Technologies Co., Ltd 华为 技术 有限公司
German thread: https://www.android-hilfe.de/thema/...rlin-bln-l21c432b360-emui-5-android-7.835906/
NOTE: Despite careful elaboration, I can not guarantee that this manual will not cause damage to the device or operating system and therefore does not assume liability for any damage or malfunctions to the hardware and software! If you are still insecure, follow these steps: Do not run the instructions unless the conditions (model number, Android version, etc.) are applicable to you or your device. Read instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
Downloads:
Updates and development stopped. With Oreo we'll go on again! !
We need this ROM! Thank you!!
ChinHon said:
Hi, I have built a custom Rom for my 6x premium. It works with small errors. (Google sync) I will try it for a week. Must remove the small bugs. When the Rom is finished I will post it here. Of course, only if you want it.
It is for the most part stock. Some Googleware is frozen or removed. The known Kangvip settings are installed. As well as the Call Recorder and Viper. It is, like all my Roms for the Mate S, based on a TWRP backup file.
Click to expand...
Click to collapse
Waiting for links. :highfive:
Sent from my Honor 8 using XDA Labs
Screen shots
.......
.......
Gonna wait for links
ChinHon said:
This editor has never liked me. There is my german thread.
https://www.android-hilfe.de/thema/...21c432b360-emui-5-android-7-krom_b357.835254/
Click to expand...
Click to collapse
Any download links now man?
Sent from my Honor 8 using XDA Labs
,........
ChinHon said:
Does not appear before Sunday. The test is not finished yet. The newest Screenshots are there.
https://www.android-hilfe.de/thema/...i-5-android-7-krom_b357.835254/#post-10518141
Click to expand...
Click to collapse
We'll be waiting man.
Sent from my Honor 8 using XDA Labs
........
Very interesting. What toolchain are you using when you compile? I haven't been able to build my environment correctly yet using the OpenKirin source and gcc-linaro.
.......
ChinHon said:
I cannot publish it. EMUI 5 is encoded. I do not want which becomes unsafe the new system.
Click to expand...
Click to collapse
So it's discontinued?
what about BLN-L22
Ramesh006 said:
what about BLN-L22
Click to expand...
Click to collapse
It should work. If it ever gets published.
.......
.......
ChinHon said:
At the moment I am in New York. I am Sunday again back in Germany. Then I write the Tutorial and upload the Rom. It goes not without Tuto. I would absolutely like to prevent bricks.
Click to expand...
Click to collapse
So sunday is the day.
Sent from my Honor 8 using XDA Labs
.......
A official rom with build number GEM-702LC209B205 has been released for 702L devices sold in Asia Pacific (CUST 209), on july 29th 2017 (incremental update) , and on august 1st 2017 (complete rom). see http://pro-teammt.ru/firmware-database/?firmware_model=GEM-702L&firmware_page=0. Note that the complete file can be directly installed on 701L and 703L, your device will be transformed softwarely ina 702L.
** Download complete rom:
Personnal link: https://1drv.ms/u/s!AoChLp8DMXIsw0RCOljX3Jz7Zj_E?e=Wkkha4
Official link: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v91984/f1/full/GEM-702LC209B205.zip
Mirror: https://www.multcloud.com/share/0f565e80-84a1-4243-8fe6-05a427e3bab8
** Download source incremental update:
Official link: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v91932/f1/full/GEM-702LC209B205.zip
** Changelog:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v91984/f1/full/changelog.xml (complete rom august 1st 2017)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G733/g490/v91984/f1/full/changelog.xml (incrmental update july 29th 2017)
** Installation methods:
http://translate.google.fr/translate?hl=fr&sl=fr&tl=en&u=http://forum.frandroid.com/topic/254188-comment-installer-une-rom-officielle-huawei/?tab=comments#comment-3726068&sandbox=1
"Build Number: GEM-702LC209B205 Release Date: 01-Aug-2017 Supported Model: GEM-702LC209 (Asia Pacific)" is too slow and laggy.
Also double tab is not working.
Antutu benchmark score is 29412.
Gps fix took 20 minutes minimum.
I returned back to CUST158B203_DEMO Version from Taiwan (December 12th 2016, labelled "demo").
Double tab working.
USA T-Mobile and Germany E-Plus had been tried no problem.
Very smooth.
Camera quality is good.
Antutu score is 42300
Only problem is some of push notifications.
also I downloaded march 2017 b202 update.zip file. Extracted to dload folder. installed with 3 buttons method. Update says ok but after restart when I check "about phone", my device still says CUST158B203.
@bycall : let's continue B202 installation issue in this dedicated thread and post
?? Why so complicated??
I have installed it via FF proxy method. It's simple and have done it about 5 times.
Other mehodes don't work.
You must install standard full b203 or 203 via normal dload and then do the incremental update to March 2017 version.
It can be rooted via systemless root command in TWRP and supersu for that
But xposed won't run because of sellinux problem.
My device: Mate 9 supersu B190 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
?? Why so complicated??
I have installed it via FF proxy method. It's simple and have done it about 5 times.
Other mehodes don't work.
You must install standard full b203 or 203 via normal dload and then do the incremental update to March 2017 version.
It can be rooted via systemless root command in TWRP and supersu for that
But xposed won't run because of sellinux problem.
Click to expand...
Click to collapse
Thanks for those details, I did group them here, and test all march 2017 B202 installation methods on 702L device.
Let's get back to B205 here. @bycall did you check GPS and push notifications?
205 Firmware is for the middle East or Asian area.
I don't think there are new features in comparison to 202 or 203.
I don't think neither. According to @bycall, it's a laggy rom!
GPS and push notifications are not working in 205.
*******************
I tried again march incremental update via HFF Proxy method, I couldn't succeed....
---------- Post added at 04:25 PM ---------- Previous post was at 04:22 PM ----------
I will try factory reset via EMUI and downgrade script. Install full B202 ROM than march update via HFF.
Ok. I've just installed this rom on a true 702L device (moreover it was a 702LC209B006), just to see if I have the same issue as you have on your 701L
after a few minutes use:
"Build Number: GEM-702LC209B205 Release Date: 01-Aug-2017 Supported Model: GEM-702LC209 (Asia Pacific)" is too slow and laggy.
Click to expand...
Click to collapse
a bit laggy only by now , I'll try further use and let you know
Also double tab is not working.
Click to expand...
Click to collapse
same for me, except is ther is a setting to turn on.
Antutu benchmark score is 29412.
Click to expand...
Click to collapse
mine is 49500
Gps fix took 20 minutes minimum.5
Click to expand...
Click to collapse
I'll try tomorrow!
bycall said:
GPS and push notifications are not working in 205.
Click to expand...
Click to collapse
which app did you try to test push notifications?
I will try factory reset via EMUI and downgrade script. Install full B202 ROM than march update via HFF.
Click to expand...
Click to collapse
answer here
I've just installed tid ROM and have more or less the same experience as Djiban.
GPS is working fine
Antutu score is around 49389
Double tap to wake does have an option to turn on, but it's not working.
The ROM it self isn't lagging at all, you just need to let it update all apps after installing the ROM.
I don't know about push notification yet, that I'll have to test further.
The good thing about this ROM is the update in Android security, if only the double tap to wake works.
As I had a minor issue (youtbe video won't launch), and the install wasn't a wiping one, I did a EMUI factory reset to test the B205 in his true shape!
Djiban said:
a bit laggy only by now , I'll try further use and let you know
Click to expand...
Click to collapse
device seems very smooth to me
mine is 49500
Click to expand...
Click to collapse
Antutu is now 47509
Note that I had one random reboot so far, which is quite annoying after such a few use of a stock rom!
Aznbull said:
I've just installed tid ROM
Click to expand...
Click to collapse
Did you installed it on a 702L true device, or on another softwarly turned into a 702L ?
have more or less the same experience as Djiban.
GPS is working fine
Antutu score is around 49389
Click to expand...
Click to collapse
cool!
Double tap to wake does have an option to turn on, but it's not working.
Click to expand...
Click to collapse
same for me
The ROM it self isn't lagging at all, you just need to let it update all apps after installing the ROM.
Click to expand...
Click to collapse
I aggree, fluid and responsive
I don't know about push notification yet, that I'll have to test further.
Click to expand...
Click to collapse
is there a best/quick/sure way to verify push notifications ?
The good thing about this ROM is the update in Android security, if only the double tap to wake works.
Click to expand...
Click to collapse
any details about previous security issue?
Djiban said:
As I had a minor issue (youtbe video won't launch), and the install wasn't a wiping one, I did a EMUI factory reset to test the B205 in his true shape!
Djiban said:
a bit laggy only by now , I'll try further use and let you know
device is very smooth too me
Antutu is now 47509
Note that I had one random reboot so far, which is quite annoying after such a few use of a stock rom!
Did you installed it on a 702L true device, or on another softwarly turned into a 702L ?
cool!
same for me
I aggree, fluid and responsive$
@Audiorafl , is there a best/quick/sure way to verify push notifications ?
any details about previous security issue?
Click to expand...
Click to collapse
I've installed the ROM on a true 702L device but mine is not a TW version.
I've noticed one strange thing while i was upgrading to this version:
I was running B202 upgrade from B003> B005>B202 ( mine was originally a B006), I've downloaded B205 to my SD card but forgot to unextracted it from the zip files. so I went to do the powerbutton/volume update thingy, and the phone did run the whole update progress.
After it was done I found out that I had "update" my B202 to B005 but strange thing is "charge" was working .
Anyway I was back on B005 and did a local update straight to B205, and everything works fine except from double tap to wake, I haven't got any random reboot , youtube video loads fine, and my notification seems to be fine, I can't say much about if the GPS issue remains because I've just tried google map and the GPS lock seems as fast as back in B005/B006. I'll let it stay for a couple of days before trying to use GPS service again.
I was wondering if we do the upgrade the right way, maybe double tap to wake might work. Was thinking like
B003 > B005/B006 > B202 > B202 > B202 > B203 > B203 > B205.
What do you guys think ?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Aznbull said:
I was wondering if we do the upgrade the right way, maybe double tap to wake might work. Was thinking like
B003 > B005/B006 > B202 > B202 > B202 > B203 > B203 > B205.
What do you guys think ?
Click to expand...
Click to collapse
Warning, all those ROM are not for the same region (C???). For example C209B006, C158B202, C209B203. So the ultra-proper way for me is to respect at least thos C??? in the incremental. Note also that C158B202 update was out after C158B203! . See Huawei Firmware Finder database for all details
Suprinsingly enough also , EMUI update build in finder don't suggest update even if your are on C209B006. Huawei updates seems very regional and limited. According to me Huawei Firmware finder was created cause of that!
I use a 702L with C209B006, and install the full C209B205 package using project menu force update. According to Fimware Finder database, I just miss the C158B203 in my incremental respecting C??? and date of release. But once agin some C158 release could not have been proposed to 702LC158 roms users . So I did:
C209B006 full package > C209B205 full package
I could indeed have tried:
GEM-702LV100R001C209B006 > GEM-702LC209B203CUSTC209D001 ful package> GEM-702LC209B205 full package.
Even though, full package means to me it can be installed on any 702L devices, instead of OTA update file only that need to follow incremental order!
Djiban said:
Warning, all those ROM are not for the same region (C???). For example C209B006, C158B202, C209B203. So the ultra-proper way for me is to respect at least thos C??? in the incremental. Note also that C158B202 update was out after C158B203! . See Huawei Firmware Finder database for all details
Suprinsingly enough also , EMUI update build in finder don't suggest update even if your are on C209B006. Huawei updates seems very regional and limited. According to me Huawei Firmware finder was created cause of that!
I use a 702L with C209B006, and install the full C209B205 package using project menu force update. According to Fimware Finder database, I just miss the C158B203 in my incremental respecting C??? and date of release. But once agin some C158 release could not have been proposed to 702LC158 roms users . So I did:
C209B006 full package > C209B205 full package
I could indeed have tried:
GEM-702LV100R001C209B006 > GEM-702LC209B203CUSTC209D001 ful package> GEM-702LC209B205 full package.
Even though, full package means to me it can be installed on any 702L devices, instead of OTA update file only that need to follow incremental order!
Click to expand...
Click to collapse
I've been flashing around between C158 and C209 on my device without any issues what so ever, the only annoying thing is the GPS bug that won't work properly after B006.
My device was initially a 702L C09B002 when I bought it, and then updated to C209B006, but my CUST was not C209D001 it was originally CUSTC999D001.
I then update the TW C158B201 > C158B202 > C158B203 made a mistake and updated from C158B203 > C209B005 > C209B205.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All the updates between C158 and C209 haven't give me any trouble beside the GPS signal that requires a reboot once and a while.
On this B205 the GPS seems to works very good I have been using GPS apps( navigation ) for a few days, and so far I haven't reboot the device once, finger cross for it staying this way.
I hope they will fix the double tap to wake function, I don't use that double tap, but if it's not working then we only have a 99% working ROM.
thanks for those details!
so that's C209B006 that brought you GPS issue that you didn't fix until flashing this C205B205?
Note that the 702L I test the B205 on is CUSTC209D001.
no gps issue for me, yet also, But I reboot oftenly
Simply International B202 Xposed (5-20-17).zip
Got AJ's (Simply International B202 Xposed (5-20-17).zip) to work. This ROM is based off the (B202 from march 6th 2017) ROM. What I did was I copied the system folder from (Simply International B202 Xposed (8-4-16).zip) to (Simply International B202 Xposed (5-20-17).zip) but DID NOT overwrite any files, but some files got added from the (8-4-16) system folder. Don't know which files were added though. Then I was able to dirty flash from kangvip v3 to the (5-20-17). Since that worked, I went ahead and did a full wipe and install. Working good do far... I'll keep you posted on "Push and GPS"....
Djiban said:
thanks for those details!
so that's C209B006 that brought you GPS issue that you didn't fix until flashing this C205B205?
Note that the 702L I test the B205 on is CUSTC209D001.
no gps issue for me, yet also, But I reboot oftenly
Click to expand...
Click to collapse
C209B006 was working fine the GPS was working perfectly, the reason for that I updated to C158B201 was to get double tap to wake and dual window mode, these options weren't available on any android 5.0 based ROM, so any rom below B201 haven't got double tap to wake or double window mode.
I was running B203 for a couple of months and decided to go back to B006, but couldn't find the B006 ROM so I went back to B005 TW ROM just to get rid of the annoying GPS issue, funny thing is when i was on B005 TW I was prompted for OTA B202, which I choose to update and got the GPS issue again.
That's where I made that mistake by flashing it back to B005 instead of the B205 ROM, the noticeable thing was my device was able to charge even though i went from a 6.0 ROM back to a 5.0 ROM.
Steamer2499 said:
Got AJ's (Simply International B202 Xposed (5-20-17).zip) to work. This ROM is based off the (B202 from march 6th 2017) ROM. What I did was I copied the system folder from (Simply International B202 Xposed (8-4-16).zip) to (Simply International B202 Xposed (5-20-17).zip) but DID NOT overwrite any files, but some files got added from the (8-4-16) system folder. Don't know which files were added though. Then I was able to dirty flash from kangvip v3 to the (5-20-17). Since that worked, I went ahead and did a full wipe and install. Working good do far... I'll keep you posted on "Push and GPS"....
Click to expand...
Click to collapse
could you post that in the B202 Simply international thread. Thanks!!
@Aznbull : audioralf propose a direct way to test push notifications:
Did you test push? I found out a direct way to test. The app ebay-keinanzeigen has a message function. I created 2 accounts and set something to sell there with account 1.
With the second account I send a message to user 1. This sends a push message.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
Hello, Today I Present The Elemental Rom For The Huawei P20 Lite EMUI 8.0.0...
Blinking To Make The Most Of Our Devices, Either By Performance, Customization And Battery
Request Permission To Use This For Your Own Mod And It Will Never Be Given To Anyone. If You Want To Use My Files For Your ROM, And Only Your ROM, Contact Me To Get Permission Before Doing So. By Not Complying With My Strict Policies, You Are Violating And The Problem Will Be Sent Immediately To a Moderator. You Can Thank The Kangers.
Click to expand...
Click to collapse
Requirements:
-Bootloader Unlocked
-Activate USB Debugging
-Activate Unknown Applications
-Activate OEM Unlock
-Install Recovery Twrp For P20 Lite
-Only For Free Versions (Dual Sim) And (Single Sim)
-Huawei P20 Lite ANE-LX1,L01,L01A,LX1A,LX3,L03,LXX,Etc :good:
Huawei P20 Lite-Recovery Twrp EMUI 8.0.0
-Decompress File:
We turn Off The Phone And Enter The Fastboot Mode,We Open The Cmd Window And Write These Codes:
https://mega.nz/#!Tp9GxQrb!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Code:
[B][FONT="Tahoma"][COLOR="Black"] fastboot flash recovery_ramdisk RECOVERY-V2.img[/COLOR][/FONT][/B]
INSTALLATION:
We Copy The Rom Elemental And Data_Full To The SD Card
We Turn Off The Phone,And Enter Recovery Twrp
Go Wipe
We mark
-Davilk /Art Cache,Cache,Data,Internal Storage,System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flash The Rom Elemental (Delay Around 4 to 6 Minutes)
-Flash Update_Data_Full Elemental (1 to 2 Minutes Delay)
-At The End Of The Installation,Press Wipe Davilk-Cache
-When Finish, We Give In Reboot System...
We turn Off The Phone And Enter The Fastboot Mode:
-Decompress File:
Kernel-Elemental.zip
We Open update.bat Press Enter
-Automatically Install Kernel+Ramdisk+Recovery-Stock
-When Finish, We Give In Reboot System...
Reboot To Stock Recovery By Vol+ And Power Button
Do a Factory Reset And Reboot System We do Initial Configuration
Initial Start And Enjoy....
The THANKS button encourages me to keep working for free. You decide if it's worth pressing
Telegram Group:
Here Will Support for All Hi6250 Devices:
Huawei Mate 10 Lite,Huawei P20-P10 Lite,Honor 6X,Honor 7X,Honor 8 Lite
Honor 5C,Huawei P9 Lite 2017 y 2016 https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
XDA:DevDB Information
ROM For The Huawei P20 Lite
Contributors
KingOfMezi
Chisetdel31260
Neondragon1909
vovan1982
ginnocenti
-KangVIP Framework & Team HRT
-Team Win Recovery Project For P10 Lite
-Huawei Technologies Co, Ltd. 华为技术有限公司
ROM OS Version: Android 8.0.0 Oreo
ROM Kernel: Linux 4.4.23+
ROM Firmware Required: EMUI 8.0.0
Version Information
Status: Stable
Current Stable Version: 2018-07-05
Stable Release Date: 2018-07-05
Created: 2018-07-05
Last Updated: 2018-07-05
Code:
[B][FONT="Tahoma"][COLOR="Red"]The New Features Use Embedded Code And Are Perfectly Integrated With The Original Emui Style.
The Added Functions Are Practical And Human, And The System Is Stable And Fluid!
Disclaimer:
Respect The Results Of The Author's Work And Prohibit Secondary Packaging Based on this ROM. ![/COLOR][/FONT][/B]
ChangeLog:
-Huawei P20 Lite-Elemental V1(8.0.0) https://drive.google.com/file/d/1TEHtj-5J-2sd_PyEvbn1lVfA4DsHR-Ui/view
-Update_Data_Full_Elemental https://drive.google.com/file/d/1KHS-7ZrQrEBgN8TJ5_y1vX5-xL-kAId1/view
-Kernel-Elemental V1 (8.0.0) https://drive.google.com/file/d/1BiJ2Yc1KZ5lpqoYZ_us34bg306Ji9FaF/view
-Magisk V16.4 https://drive.google.com/file/d/1E1ko_ygV36BSQWfq4rBf-IbV0MMnRmVa/view
-Based On The Firmware Huawei P20 Lite ANE-LX1C432B146
-Patch Security July-2018 (07/05/2018)
-New Smooth Kangvip Tools In Your Ultimate Version Stable For EMUI 8.0.0
-Added Aroma Installer, intelligent and friendly installation
-The new functions and optimizations are the following:
-Add the Xposed configuration options (configuration K plus configurations)
-enable reboot (patience)if it is not activated, restart it again.
-10 types of battery cable colors (red, yellow, blue, green, violet, etc.)
-were added, can be configured separately
-A slider status bar was added to adjust the brightness of the screen
-(it was opened in K Settings - Status bar settings)
-Update the official's face to unlock, raise the screen with bright hand and other functions
-Add the customization of the pre-key feature to the fingerprint
-(click, slide, long press can be customized)
-Re-insert the letter "K" in the list (the "yes, it no longer appears on the desktop" icons)
-Corrected the fingerprint problem for all versions
-And Facial unlocking, working perfectly
-With A Very Nice Interface
-Added Zipaling
-Added Support DTS
-Added Xperia Keyboard
-Added Youtube Was In The background
-Added New Theme By Default Of The rom
-Added All The Hidden Functions Of Huawei
-Now you can choose which camera to install in the installation-Aroma
-Added Camera Huawei P20 Pro Highest Quality 30% And Fluency
-Added Camera Huawei Mate 10 Pro Highest Quality 30% And Fluency
-Added Camera Huawei P20 Lite Highest (Ar Lens+Special Effects)
-Added New Camera Z Huawei Mate 10 Lite
-Added Sound Effect Huawei Histen Latest Version
-Updated karaoke feature will provide a better user experience
-Added Dolby Atmos for EMUI 8.0.0(Flash Through Recovery Twrp...
https://mega.nz/#!p5kjgYTA!n_s9igU6PK78nFMqsrix7vU7uWJWU606WUWhxINqf38 You Have To Have Magisk Installed)
-New Framework Codes To reduce energy consumption, improve fluency and Balanced Performance
-Added 2G,3G,4G,4.5G support as default for all models(enjoy the high speeds available in your country)
-Now The System Has Free Available Space 900MB to 1000MB
-Added desktop design (Increase 5x6,6x6,6x7,7x7,7x8,8x8)
-Music Ingles Download,Karaoke,Radio,Album
-Music Spanish Download,Karaoke,Radio,Album
-Music Stock EMUI 8.0.0
-Added Support For Different Versions ANE-LXX
-End
is this work on ANE-LX2?
Where is the download link maestro? I want test it.. thankyou
KingOfMezi said:
...
-Huawei P20 Lite ANE-LX1,L01,L01A,LX1A,LX3,L03,LXX,Etc :good:
...
Click to expand...
Click to collapse
@KingOfMezi, from where do you get the information that P20 lite have the versions L01A and LX1A ?
Do you know if your ROM can be installed in the ANE-AL00 and ANE-TL00 versions ?
Atif Munir said:
is this work on ANE-LX2?
Click to expand...
Click to collapse
kilroystyx said:
@KingOfMezi, from where do you get the information that P20 lite have the versions L01A and LX1A ?
Do you know if your ROM can be installed in the ANE-AL00 and ANE-TL00 versions ?
Click to expand...
Click to collapse
@Atif Munir
@kilroystyx
ANE-LX2 ANE-AL00 ANE-TL00 ANE-LXX
yes, compatible with any version and compilation, I mentioned it above
riorabel12 said:
Where is the download link maestro? I want test it.. thankyou
Click to expand...
Click to collapse
In a few days, the links will be ready, be patient
plz set facebook messenger lock in apps lock setting. and also add call recorder and ad blocker.
still uploading files? ahhhhhhhhhh
Atif Munir said:
still uploading files? ahhhhhhhhhh
Click to expand...
Click to collapse
Ok, in this week friend, have patience,
You can accelerate all this,
if you could make a backup of the partition version and
upload it to a server and send it
for example, mega
KingOfMezi said:
Ok, in this week friend, have patience,
You can accelerate all this,
if you could make a backup of the partition version and
upload it to a server and send it
for example, mega
Click to expand...
Click to collapse
My version backup.
kilroystyx said:
My version backup.
Click to expand...
Click to collapse
I already found what I was looking for, thank you very much, I already know the size of the correct partitions of the huawei p20 lite :highfive:
kilroystyx said:
My version backup.
Click to expand...
Click to collapse
how to make this backup?
KingOfMezi said:
I already found what I was looking for, thank you very much, I already know the size of the correct partitions of the huawei p20 lite :highfive:
Click to expand...
Click to collapse
If you need more info related to the size of the partitions check this Thread
Atif Munir said:
how to make this backup?
Click to expand...
Click to collapse
With this TWRP
@kilroystyx
Bro tries this
this serves to return from a custom rom or roms gis to stock emui 8.0.0
is the firmware that can be flashed using the recovery twrp
Huawei P20 Lite-ANE-LX1 8.0.0.144 (C432) https://drive.google.com/open?id=1ke7D7yJnl6Za8qrEcRMpnlxsN1tNKOnQ
use this recovery twrp for p20 lite https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
INSTALLATION:
We Copy The Firmware To The SD Card
We Turn Off The Phone,And Enter Recovery Twrp
Go Wipe
We mark
-Davilk /Art Cache,Cache,Data,Internal Storage,System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flash The Firmware (Delay Around 4 to 5 Minutes)
-When Finish, We Give In Reboot System...
-End
Any question
send me a message on telegram
https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
hello, this room have kernel mod? can overclock gpu and cpu? can this kernel run gameguardian? because all roms i test gameguardian not write value just rea. thanks
KingOfMezi said:
@kilroystyx
Bro tries this
this serves to return from a custom rom or roms gis to stock emui 8.0.0
is the firmware that can be flashed using the recovery twrp
Huawei P20 Lite-ANE-LX1 8.0.0.144 (C432) https://drive.google.com/open?id=1ke7D7yJnl6Za8qrEcRMpnlxsN1tNKOnQ
use this recovery twrp for p20 lite https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
INSTALLATION:
We Copy The Firmware To The SD Card
We Turn Off The Phone,And Enter Recovery Twrp
Go Wipe
We mark
-Davilk /Art Cache,Cache,Data,Internal Storage,System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flash The Firmware (Delay Around 4 to 5 Minutes)
-When Finish, We Give In Reboot System...
-End
Any question
send me a message on telegram
https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
Click to expand...
Click to collapse
As soon as I get home I'm going to test your ROM
KingOfMezi said:
@kilroystyx
Bro tries this
this serves to return from a custom rom or roms gis to stock emui 8.0.0
is the firmware that can be flashed using the recovery twrp
Huawei P20 Lite-ANE-LX1 8.0.0.144 (C432) https://drive.google.com/open?id=1ke7D7yJnl6Za8qrEcRMpnlxsN1tNKOnQ
use this recovery twrp for p20 lite https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
INSTALLATION:
We Copy The Firmware To The SD Card
We Turn Off The Phone,And Enter Recovery Twrp
Go Wipe
We mark
-Davilk /Art Cache,Cache,Data,Internal Storage,System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flash The Firmware (Delay Around 4 to 5 Minutes)
-When Finish, We Give In Reboot System...
-End
Any question
send me a message on telegram
https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
Click to expand...
Click to collapse
this is custom rom or stock? i have ANE-X2 can i flash it?
You should not open placeholder topics.
kilroystyx said:
As soon as I get home I'm going to test your ROM
Click to expand...
Click to collapse
Okay friend :good:
Any question
send me a message on telegram
Atif Munir said:
this is custom rom or stock? i have ANE-X2 can i flash it?
Click to expand...
Click to collapse
is stock emui 8.0.0,
works to return a custom rom to stock emui 8.0.0
is based on the firmware ANE-LX1C432B144
it can flash from any recovery twrp
KingOfMezi said:
Okay friend :good:
Any question
send me a message on telegram
Click to expand...
Click to collapse
Don't work on mine, and unfortunately brick the device, I recommend to remove the link.
- I followed all the steps
- Installation with success without any error reported.
- One bootloop
- Then restarted in the eRecovery
- I boot into TWRP but it was replaced by stock recovery
- I boot into fastboot mode and fllash TWRP with success as you can see bellow:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery_ramdisk twrp_p20_lite_0.1.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (24952 KB)...
OKAY [ 0.859s]
writing 'recovery_ramdisk'...
OKAY [ 0.125s]
finished. total time: 0.984s
- But every time that I boot into TWRP, it was replaced by stock recovery.
- After many attempts without success I decided follow the suggestion from xda member x4ever_2, update firmware via eRecovery and it worked.
In my opinion the reason for all this was the FRP, from which device come the FRP?
Letzen said:
You should not open placeholder topics.
Click to expand...
Click to collapse
@KingOfMezi, Letzen is right.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano/pico gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
Almost all
Known Issues
- video record
Links
5. 20210419: april security patch: https://drive.google.com/file/d/1aXGrtLrmqAQEYMxcvzck9hJOd-f4OVke/view?usp=sharing
4. 20201220: december security patch: https://drive.google.com/file/d/1KMqFHfDORMCsNXGSrpWkh5IIZp1ZN5oJ/view?usp=sharing
3. 20200815: august security patch: https://drive.google.com/file/d/1oVmXeSfa7p9d4L2nSmiigCjNCo60So7n/view?usp=sharing
2. 20200724: july security patch: https://drive.google.com/file/d/15_4QTR5vKMRvIwXevu1QYb3WHMZsCW72/view?usp=sharing
1. 20200616: initial build, june security patch: https://drive.google.com/file/d/1is2tRwqsd7Nm9dhpkPrGbpgg7AjnOkZh/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM
Android: 10.0
Recovery
this is my build, the error with the screen off is still present, but I added an option for twrp with unlimited screen timeout, as a result, the screen does not automatically turn off.
for recovery: https://drive.google.com/file/d/1UeC4LwVEA6d46y0UPpuuipHbcjAtAo0Q/view?usp=sharing
for odin: https://drive.google.com/file/d/1WmAzhWkq9l_3d4m3Ft1xmihZaYfccUym/view?usp=sharing
Sources
Sources: https://github.com/Lineageos
Device: https://github.com/Valera1978/android_device_samsung_picassolte
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8974
Vendor: https://github.com/Valera1978/android_vendor_samsung_picassolte
Thank you for this build.
Does anybody else have the problem that picture-in-picture mode is not working?
I'm watching a video with the German sky go app. Pressing the home button takes me to home screen and does not show the video in the small window.
This was working with the Android 9 build.
The permissions are set for the app.
Thank you for this version.
Warning: I initially tried with GApps Stock (like I did with 16.0) and it totally messed up the system (Pixel Launcher crashed constantly, attempting to log in to Google account resulted in a black screen). Now, with Pico, it seems to work alright.
deleted
Can i use a t525 rom to my t520 tablet? I mean, its the same tablet but without lte? If not, pls make a android 10 rom for the t520 tablet
Tabletbungie said:
Can i use a t525 rom to my t520 tablet? I mean, its the same tablet but without lte? If not, pls make a android 10 rom for the t520 tablet
Click to expand...
Click to collapse
T520 is not just T525 without LTE. T320, T325 and T525 have Qualcomm Snapdragon SoC's inside, so most of the codebase can be shared between them. T520 has Exynos which is quite different.
help
i had an error
it says
unknown command [retry_update]
Updater process ended with ERROR: 7
What i should do?
please help me
Just updated to 20200724 with GApps Pico, Magisk and Viper4Android. Nothing out-of-the-ordinary stands out, so in all regards this appears to be a safe upgrade.
в прошивке - LineageOS 17.1 | Android 10.0 Q 202007 24 (Samsung Galaxy Tab Pro 10.1)
не работает (функция не доступна) - поверх других приложений
Valera1978 - обратите внимание на проблему! исправьте пожалуйста!
....
in the firmware - the Lineages of 17.1 | Android 10.0 Q 2007 24 (Samsung Galaxy Tab Pro 10.1)
does not work (function is not available) - on top of other apps
Valera1978-pay attention to the problem! please fix it!
I tried to flash lineageOS 17.1 & 16 but got this error in attachment
What's wrong
Witzker said:
I tried to flash lineageOS 17.1 & 16 but got this error in attachment
Click to expand...
Click to collapse
Maybe try this?
M0lle said:
Maybe try this?
Click to expand...
Click to collapse
THX for taking care but it was my fault
I have not red carefully the instruction for recovery
I had an old version
Now installed the recommended one
for recovery: https://drive.google.com/file/d/1UeC...ew?usp=sharing
Here I have another question
when I go to TWRP -Install Choose the TWRP zip I only installed image not the Option Boot.
Was This OK?
TWRP is starting correctly and I have successfully flashed the image of June (1) & PICO.
BUT I have NO sound!!
How do I install the updates?
Links
3. 20200815: august security patch: https://drive.google.com/file/d/1oVm...ew?usp=sharing
2. 20200724: july security patch: https://drive.google.com/file/d/15_4...ew?usp=sharing
1. 20200616: initial build, june security patch: https://drive.google.com/file/d/1is2...ew?usp=sharing
Just flashing the latest (3) over the old
or flashing the next update (2) then the latest (3)
OR wipe and flash the Latest (3) ?
PLS Help again
THX
Witzker said:
How do I install the updates?
Click to expand...
Click to collapse
Wipe Art/Dalvik Cache, Cache and System
Flash the ROM image (the latest one only)
Flash the GApps
(Flash Magisk if you want root)
Reboot to System
Wait...
M0lle said:
Wipe Art/Dalvik Cache, Cache and System
Flash the ROM image (the latest one only)
Flash the GApps
(Flash Magisk if you want root)
Reboot to System
Wait...
Click to expand...
Click to collapse
SO I will lose all my settings?
Witzker said:
SO I will lose all my settings?
Click to expand...
Click to collapse
No, you won't. Data and Internal Storage will stay intact. This is the procedure I follow when I update from one version of e.g. 17.1 to newer one. Only when upgrading to a new major version do I fully wipe the device.
If you're unsure, backup your stuff with "ROM Settings Backup" and "Titanium Backup" before wiping anything.
THX Great worked ok.
BUT still no sound!
How to check if there is maybe a hardware problem?
I'm going to install this Rom (thanks to developer) , is the sound problem real?
alonzimanuel said:
is the sound problem real?
Click to expand...
Click to collapse
I haven't had any sound problems with either 16.0 or 17.1.
Witzker said:
THX Great worked ok.
BUT still no sound!
How to check if there is maybe a hardware problem?
Click to expand...
Click to collapse
My tab also freezes during browsing websites or open other apps!
What can be the reason ?
Are there some settings to change??
PS: I use Microsoft launcher
Witzker said:
My tab also freezes during browsing websites or open other apps!
What can be the reason ?
Are there some settings to change??
PS: I use Microsoft launcher
Click to expand...
Click to collapse
Don't know that launcher (mine Nova Prime) but did you test turning of animations in dev settings?