Related
This is a starter thread for getting Nintendo's latest Android app (which has finally come from iOS over three months later), Super Mario Run, to work on Android devices that have been rooted and possibly have no Google Play Store installed. Developers, please contribute your findings!
It worked with root but I got an error when I finished the tutorial. Then I saved my game with a Nintendo account and I cleared game data. I've used magisk hide with this game and I can play again
apfo said:
It worked with root but I got an error when I finished the tutorial. Then I saved my game with a Nintendo account and I cleared game data. I've used magisk hide with this game and I can play again
Click to expand...
Click to collapse
I used magisk too but I can't find where I can hide.. can you help me? Do I need to install a module?
n0m1s said:
I used magisk too but I can't find where I can hide.. can you help me? Do I need to install a module?
Click to expand...
Click to collapse
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
ApollosRage said:
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
Click to expand...
Click to collapse
Thanks for that, but it's not working too
ApollosRage said:
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
Click to expand...
Click to collapse
I did exactly what you did and it worked fine for me.
So do I flash via twrp the zip in the magisk post?
I use magisk to hide mario but when i pass the tutorial send error 804 5100 and have to delete the Account:.xml located in /data/data/com.nintendo.zara/sharedfolder and then log in with my account so brings my save but i complete 1 course and the same error again and have to do it all over again, does anybody find a solution for this?
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Magisk work great for me
simbin said:
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Click to expand...
Click to collapse
it is a supersu replacement but the magisk is great and has better functions and the moduls are great, forget the turning off part and the the recovery and flash the zip, the magisk do it all for you!
Mago6246 said:
it is a supersu replacement but the magisk is great and has better functions and the moduls are great, forget the turning off part and the the recovery and flash the zip, the magisk do it all for you!
Click to expand...
Click to collapse
Don't think magisk works with cm12 on Amzn Fire Phone bc bootloader isn't actually unlocked. They should limit SafetyNet to Leaderboards - pretty sure that's what all the fuss is about. Fine, Nintendont take my money!
Magisk Manager won't install Magisk on my rooted S7 Edge. I've read that it's not compatible with Samsung devices right now, don't know if that's true. How else can I make Super Mario Run work?
suhide give me bootloop with lineos so I will try magisk
simbin said:
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Click to expand...
Click to collapse
Yes, You can use it alongside with SuperSU.
Hi !
Same error for me... I installed Magisk, uninstalled SuperSU, set the Super Mario App to hide but i still get the error...
Did I miss something ?
Thanks
Rooted Nexus 5 running Cataclysm 6.0.1
Miitomo was patched using a special security bypasser made for it, and also with XPosed and RootCloak. Is there a similar method for those who seem to have issues using Magisk?
I myself haven't tried Magisk. I'll see how it works on my Galaxy S7. :fingers-crossed:
Xda, please merge this thread with the other thread that I made. I accidentally made a duplicate.
I do not have Google Play services installed, and it seems to need it.
I'm currently running Magisk with Magisk Hide on and RootCloak as well and it keeps erroring out. Currently the only workaround I've found is deleting the deviceAccount xml file in the app prefs folder. I have a feeling it has something to do with xposed or safetynet that's causing it to fail. I enjoy the game enough that I wouldn't mind buying it, but not if Nintendo is going to lock users out like this.
Hi title says all,
If you root your device is it possible to use snapchat?
On my rooted samsung device i was gettting after a few days a temporary ban.
Thanks, ?
Snapchat should work fine. I had one time over this weekend i got banned for 12 hours but at the time my Magisk was crashing from updating without removing substratum theme.
As long as you enable magisk hide and pay attention to updates, you should be fine.
You can use Snapchat if you don't install Xposed, I do know that much. Xposed gives you a temp. ban. There might be a work-around, but if you don't need that, you're good to go anyways
Don't have OP yet , but with other devices I've found that enabling Hide on Magisk for Snapchat actually makes things worse
Do others using Magisk have to enable Hide to use Snapchat?
jcrompton said:
Don't have OP yet , but with other devices I've found that enabling Hide on Magisk for Snapchat actually makes things worse
Do others using Magisk have to enable Hide to use Snapchat?
Click to expand...
Click to collapse
I have always hid Snapchat and Google Pay, along with other Google apps and never had an issue.
I have snapchat and I don't hide it from Magisk.
Sent from my GM1915 using Tapatalk
had issues on my Pixel 3XL
everything works perfectly fine on the OP7Pro
Well after a week rooting my device i was getting issues. But now i dont wanna risk a permanent ban for the sake of rooting ?
How to use Snapchat with magisk (After Ban)
bartjeh1991 said:
Well after a week rooting my device i was getting issues. But now i dont wanna risk a permanent ban for the sake of rooting
Click to expand...
Click to collapse
Follow these steps to use Snapchat with magisk -
1.) Update to latest Magisk stable build v20.0 - https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip
2.) After updating magisk, Go to Magisk Manager > Magisk Hide and check/enable Snapchat and Google Services (all services have to be marked).
3.) Hide Magisk Manager by it self, go to Magisk Manager > Settings and "Hide Magisk Manager" so it will repack Magisk Manager with random name.
4.) Delete "busybox" binary from /system/xbin directory and install BusyBox module from Magisk Manager > Downloads.
5.) Clear data and cache of Snapchat, try to login this time, it will work for sure, if it doesn't, login to this and click unlock my account - https://accounts.snapchat.com/accounts/login?continue=https://accounts.snapchat.com/accounts/welcome
I have tried this myself and it works, my first main account was permanent banned on magisk canary build, After that I deleted that account and started out with fresh new account.
Tested on -
Samsung Galaxy S9+
Rom - Ultimate Rom v11.3
Magisk - v20.0 (Stable)
Kernel - ElementalX
ricketrash said:
You can use Snapchat if you don't install Xposed, I do know that much. Xposed gives you a temp. ban. There might be a work-around, but if you don't need that, you're good to go anyways
Click to expand...
Click to collapse
You won't get a temp ban with xposed. I'm even using SnapTools (Snapchat modifications) along with xposed and I've been fine for about 3 months now.
Hello guys,
I have poco x3pro and it is running Lineag os 18. Now i have an app called HDFC netbanking but while installing it shows "app does not support rooted device". i have learnt that with Magisk app i can buy pass it. so, how can i do that ? do i have to flash again? yours suggestions are welcomed.
Dezun said:
Hello guys,
I have poco x3pro and it is running Lineag os 18. Now i have an app called HDFC netbanking but while installing it shows "app does not support rooted device". i have learnt that with Magisk app i can buy pass it. so, how can i do that ? do i have to flash again? yours suggestions are welcomed.
Click to expand...
Click to collapse
Did you root with magisk?
If old version
https://xiaomiui.net/how-to-use-magisk-hide-5610/
In Magisk settings, enable Zygisk and Enforce denylist, restart device, go to magisk settings again > configure denylist and check apps you want to hide from root.
NOSS8 said:
Did you root with magisk?
If old version
https://xiaomiui.net/how-to-use-magisk-hide-5610/
Click to expand...
Click to collapse
No i flash with Twrp
Popletenec said:
In Magisk settings, enable Zygisk and Enforce denylist, restart device, go to magisk settings again > configure denylist and check apps you want to hide from root.
Click to expand...
Click to collapse
This is the answer
samsungics1200 said:
This is the answer
Click to expand...
Click to collapse
ok.. but do ihave to flash magisk ?
i have installed app but in magisk app setting i cant see the option mentioned.
Comdirect photoTAN app detecting root
Since version 8.3.0 additional measures to detect root have been added, do not update as MagiskHide won't be able to prevent detection. Until a solution is found I would recommend staying on the previous version for as long as possible. Finding...
forum.xda-developers.com
here is a lengthy thread with another bank, where you can find many many suggestions on how to fix the problem.
i am having x3pro myself using the app mentioned there, but not using LOS18 A11 but Miui A12
with the newer magisk versions
- denylist active
- maybe try shamiko module (denylist enforce off)
- maybe try without shamiko (denylist enforce on)
- maybe magiskhide props config module
- universal safetynet fix
- magisk package renamed
- make sure to enable all options on your denylist application selection to hide all processes
- the application might get root info from google play services (GMS) or play store, where you should also delete cache after making changes and rebooting to see if your change does take effect.
Dezun said:
ok.. but do ihave to flash magisk ?
i have installed app but in magisk app setting i cant see the option mentioned.
Click to expand...
Click to collapse
you need to install the latest version of magisk app and flashable zip suitabe for your android version magisk 23 is for android 11 while magisk 24 is compatible upto latest but flash latest fpr maximum compatibility
Dezun said:
ok.. but do ihave to flash magisk ?
i have installed app but in magisk app setting i cant see the option mentioned.
Click to expand...
Click to collapse
Why don't you try ih8sn since you are on LineageOS.
Was this resolved? I am facing this issue myself at the moment with HDFC App.
ROM - Pixel experience 13 Plus
Device - OP7
Magisk v- 26.1
Universal Safety Net - 2.4.0
Deny List - enabled with many more apps
Example - Gpay, PhonePe, Paytm (All working fine)
YASNAC - Both checks passed
When I first rooted my phone, everything was fine but after a few days some apps started showing up as "This app won't work on your device"
It wouldn't be a problem since I can just download the APK's, but I need to use the Revolut app, it is only available as a mobile app and when you don't install it from the Play store, it just doesn't work.
Can anyone show me a workaround for this?
Maybe a way to trick play store into letting me download all the apps as usual
or a way to trick the app into thinking it's been installed from the play store.
I thought about locking the bootloader again (OEM) but it'll wipe all data, and I don't want that. Because it's been a few months since I rooted my phone and I have a lot of data.
My phone is Samsung Galaxy S10E - SM-G970F if this info means anything.
hmm, try unrooting it, install all apps you need, and then re-root it again.
NikolaTechGuy said:
hmm, try unrooting it, install all apps you need, and then re-root it again.
Click to expand...
Click to collapse
Rooting wipes all the data tho
Quidney said:
When I first rooted my phone, everything was fine but after a few days some apps started showing up as "This app won't work on your device"
It wouldn't be a problem since I can just download the APK's, but I need to use the Revolut app, it is only available as a mobile app and when you don't install it from the Play store, it just doesn't work.
Can anyone show me a workaround for this?
Maybe a way to trick play store into letting me download all the apps as usual
or a way to trick the app into thinking it's been installed from the play store.
I thought about locking the bootloader again (OEM) but it'll wipe all data, and I don't want that. Because it's been a few months since I rooted my phone and I have a lot of data.
My phone is Samsung Galaxy S10E - SM-G970F if this info means anything.
Click to expand...
Click to collapse
you must pass safetynet as well as play integrity api in order for the apps to reappear. You can check this status by downloading the application YASNAC for safetynet status and Play Integrity API checker for checking play integrity status.
If your using magisk then you can flash safetynetfix module from here.
Flashing it should make the Basic integrity and cts profile check from False to true in yasnac
It should also turn Basic Integrity and Device Integrity from a Cross to a Tick
Strong integrity will always fail for rooted users. so forget abt that
Then go to apps > find playstore > storage > clear data
Open playstore again and you'll see an outdated UI dont worry it'll restore on the next app opening
in playstore then tap on your profile picture at the top right then go to settings. Scroll down and see if the device is play protect certified.
If it is the apps should reappear.
This is way too overkill tbh. you could just install Aurora store and call it a day since its litt playstore without accounts and stuff.
Captain_cookie_200 said:
you must pass safetynet as well as play integrity api in order for the apps to reappear. You can check this status by downloading the application YASNAC for safetynet status and Play Integrity API checker for checking play integrity status.
If your using magisk then you can flash safetynetfix module from here.
Flashing it should make the Basic integrity and cts profile check from False to true in yasnac
It should also turn Basic Integrity and Device Integrity from a Cross to a Tick
Strong integrity will always fail for rooted users. so forget abt that
Then go to apps > find playstore > storage > clear data
Open playstore again and you'll see an outdated UI dont worry it'll restore on the next app opening
in playstore then tap on your profile picture at the top right then go to settings. Scroll down and see if the device is play protect certified.
If it is the apps should reappear.
This is way too overkill tbh. you could just install Aurora store and call it a day since its litt playstore without accounts and stuff.
Click to expand...
Click to collapse
Yes but if I install it from the Aurora store I won't be able to use Revolut probably.
Also I installed the module, and though the YASNAC check has 2 ticks, the Play Integrity checker says failed on "Device integrity" and "strong integrity." What do i do then?
Quidney said:
Yes but if I install it from the Aurora store I won't be able to use Revolut probably.
Also I installed the module, and though the YASNAC check has 2 ticks, the Play Integrity checker says failed on "Device integrity" and "strong integrity." What do i do then?
Click to expand...
Click to collapse
hm what method of rooting do you use?
Captain_cookie_200 said:
hm what method of rooting do you use?
Click to expand...
Click to collapse
if you flashed the safetynet fix in magisk already then im afriad i dont know what else is wrong
Captain_cookie_200 said:
hm what method of rooting do you use?
Click to expand...
Click to collapse
Downloaded the firmware, and changed it using magisk, flashed it using ODIN.
It's Magisk 25.2
Zygisk: Yes
Ramdisk: No
But I also have the "Hide Magisk" option, and Systemless Hosts module
Captain_cookie_200 said:
if you flashed the safetynet fix in magisk already then im afriad i dont know what else is wrong
Click to expand...
Click to collapse
Yep I did.
Quidney said:
Yep I did.
Click to expand...
Click to collapse
i dont know then. i passed safety net on one ui 5 on galaxy A32 4G using that module
Captain_cookie_200 said:
i dont know then. i passed safety net on one ui 5 on galaxy A32 4G using that module
Click to expand...
Click to collapse
I also passed the check after the 25th reboot. It took some time to adjust I guess.
But I cannot hide my magisk launcher, it gets detected by Revolut. Welp
Quidney said:
I also passed the check after the 25th reboot. It took some time to adjust I guess.
But I cannot hide my magisk launcher, it gets detected by Revolut. Welp
Click to expand...
Click to collapse
Actually there is a way to fix that as well.
First of all go to magisk then press the gear icon on top right then select Hide the Magisk app. Allow it to install unknown apps. Give it a good name Let it do its work. do not go to home or anywhere while it is reinstalling the apk as something else
Second of all download shamiko from here.
First make sure you have enforce denylist disabled in the magisk's settings. Yep disabled. if it is enabled toggle it off
Then flash shamiko and reboot. Now once you boot back into the system. Open magisk again (or the new reinstalled renamed magisk app) and go to settings and then go to configure denylist. Now find your app and press the checkbox
Now see if it bypasses the root detection. if not then clear all your apps in your recents and try again. This trick always helps to get around apps with root checks.
Captain_cookie_200 said:
Actually there is a way to fix that as well.
First of all go to magisk then press the gear icon on top right then select Hide the Magisk app. Allow it to install unknown apps. Give it a good name Let it do its work. do not go to home or anywhere while it is reinstalling the apk as something else
Second of all download shamiko from here.
First make sure you have enforce denylist disabled in the magisk's settings. Yep disabled. if it is enabled toggle it off
Then flash shamiko and reboot. Now once you boot back into the system. Open magisk again (or the new reinstalled renamed magisk app) and go to settings and then go to configure denylist. Now find your app and press the checkbox
Now see if it bypasses the root detection. if not then clear all your apps in your recents and try again. This trick always helps to get around apps with root checks.
Click to expand...
Click to collapse
Just noticed since you have magisk hide your either using magisk delta or an older version of magisk. I guess you could just use magisk hide but incase that isnt working the method above is the way to go.
Captain_cookie_200 said:
Just noticed since you have magisk hide your either using magisk delta or an older version of magisk. I guess you could just use magisk hide but incase that isnt working the method above is the way to go.
Click to expand...
Click to collapse
I have 25.2 (25200), Zygisk.
But There's an option in the settings right now it says "Restore the Magisk App" because I've already hidden it.
Captain_cookie_200 said:
Actually there is a way to fix that as well.
First of all go to magisk then press the gear icon on top right then select Hide the Magisk app. Allow it to install unknown apps. Give it a good name Let it do its work. do not go to home or anywhere while it is reinstalling the apk as something else
Second of all download shamiko from here.
First make sure you have enforce denylist disabled in the magisk's settings. Yep disabled. if it is enabled toggle it off
Then flash shamiko and reboot. Now once you boot back into the system. Open magisk again (or the new reinstalled renamed magisk app) and go to settings and then go to configure denylist. Now find your app and press the checkbox
Now see if it bypasses the root detection. if not then clear all your apps in your recents and try again. This trick always helps to get around apps with root checks.
Click to expand...
Click to collapse
I'm on the phone with my friend while she sleeps so I cannot reboot the phone >_<
But I'll update you tomorrow probably if it works.
Quidney said:
I have 25.2 (25200), Zygisk.
But There's an option in the settings right now it says "Restore the Magisk App" because I've already hidden it.
Click to expand...
Click to collapse
oh i see. wait how.do you have magisk hide then
Quidney said:
I'm on the phone with my friend while she sleeps so I cannot reboot the phone >_<
But I'll update you tomorrow probably if it works.
Click to expand...
Click to collapse
oh i see. i just tested it on my device and yes it works. the shamiko method is listed prevents the root detection. hope it works fine for you
Captain_cookie_200 said:
oh i see. wait how.do you have magisk hide then
Click to expand...
Click to collapse
I don't have "Magisk Hide" I think that is another feature (Superuser -> Hide) which does not exist for me.
Quidney said:
I don't have "Magisk Hide" I think that is another feature (Superuser -> Hide) which does not exist for me.
Click to expand...
Click to collapse
magisk hide was removed. anyways try the shamiko method and tell if it works
Captain_cookie_200 said:
magisk hide was removed. anyways try the shamiko method and tell if it works
Click to expand...
Click to collapse
Yep everything worked out. I have Revolut now, and it doesn't detect magisk or root.
I still don't have Google Pay, but that's a job for future me.
Hi All,
I have recently updated Barclays mobile app on my OnePlus 6 rooted running LOS 19 but the app today detected the root (probably the latest update enable that). So I have cleared the data and cache however I cannot go through the menu to access my account and I get error 00006 now.
I have magisk hide enabled and this has been working with Barclays and the other banking app for a year now (excluding Santander which detects the root anyway)
Do you have any suggestions, please?
I'm in the same boat. Magisk delta with zygisk and app hidden etc etc incl. deny list latest Barclays app still detects root. Have even tried deleting Fox folder, in case it starts seeing that recovery folder. Tried lastest canary build, still the same. Anyone had success with running the latest Barclays app rooted? Poco F3 user BTW, but the principles should be the same...
Do you know if removing the root (magisk) fixes the issue?
reg66 said:
I'm in the same boat. Magisk delta with zygisk and app hidden etc etc incl. deny list latest Barclays app still detects root. Have even tried deleting Fox folder, in case it starts seeing that recovery folder. Tried lastest canary build, still the same. Anyone had success with running the latest Barclays app rooted? Poco F3 user BTW, but the principles should be the same...
Click to expand...
Click to collapse
danc.940 said:
Do you know if removing the root (magisk) fixes the issue?
Click to expand...
Click to collapse
Nope, haven't tried yet... But i'm guessing after removing root and clearing app data it would work...
reg66 said:
Nope, haven't tried yet... But i'm guessing after removing root and clearing app data it would work...
Click to expand...
Click to collapse
Actually, the app might still recognise custom rom. Can't face stock miui just over banking app. What a blow
reg66 said:
Actually, the app might still recognise custom rom. Can't face stock miui just over banking app. What a blow
Click to expand...
Click to collapse
Is there a way to hide also the unlocked bootloader? We won't know until we try it I guess. There is also a Reddit post where many people seem to have the same problem.
Keep an eye on that too until we find a solution.
Do you know where we could get the version of the app that still works with magisk? Is it possible to export the app? Maybe we can find someone with an old version and ask them to share the apk?
A way to roll back has been posted by u/SuzannaBadger in the Reddit thread, pasting here for visibility:
Hi,
I've found a temp fix for this for now.
Steps are as below:
1. Uninstall the current Barclays banking app.
2. Go to play store,settings,network settings and turn off 'auto update apps'
3. Download the old Barclays app from: https://barclays-bank-plc-banking.en.uptodown.com/android/download (it's legit)
4. Install the app.
5. Go into Majisk, settings, configure denylist and tick all Barclays options (may already be ticked, if this is the case ignore step 5)
6. Restart phone.
7. Open Barclays app and setup as you usually would.
Hopefully this works for you. Applist detector is even detecting I have the Majisk app (even though I have Shamiko and have hidden it) but the Barclays app still works as it's the previous version.
Click to expand...
Click to collapse
reg66 said:
Actually, the app might still recognise custom rom. Can't face stock miui just over banking app. What a blow
Click to expand...
Click to collapse
Is there a way to hide also the unlocked bootloader? We won't know until we try it I guess. There is also a Reddit post where many people seem to have the same problem.
https://www.reddit.com/r/Magisk/comments/118yl7n
Keep an eye on that too until we find a solution.
Do you know where we could get the version of the app that still works with magisk? Is it possible to export the app? Maybe we can find someone with an old version and ask them to share the apk?
Jenpyon said:
A way to roll back has been posted by u/SuzannaBadger in the Reddit thread, pasting here for visibility:
Click to expand...
Click to collapse
Great thanks for the update.
danc.940 said:
Is there a way to hide also the unlocked bootloader? We won't know until we try it I guess. There is also a Reddit post where many people seem to have the same problem.
Keep an eye on that too until we find a solution.
Do you know where we could get the version of the app that still works with magisk? Is it possible to export the app? Maybe we can find someone with an old version and ask them to share the apk?
Click to expand...
Click to collapse
Not sure about hiding unlock BL, never looked into it. If you've used the linked 2.72.2 barclays app, as i have, be sure to disable auto update in google playstore
EDIT: just seen it in step 2!! however, i just selected do not auto update for that specific app, rather than all apps
danc.940 said:
Do you know if removing the root (magisk) fixes the issue?
Click to expand...
Click to collapse
Yes it does fix the issue. I've checked and now have a hard choice of either restore magisk needing BCR heavily.
danc.940 said:
Is there a way to hide also the unlocked bootloader? We won't know until we try it I guess. There is also a Reddit post where many people seem to have the same problem.
Keep an eye on that too until we find a solution.
Do you know where we could get the version of the app that still works with magisk? Is it possible to export the app? Maybe we can find someone with an old version and ask them to share the apk?
Click to expand...
Click to collapse
Hiding unlocked bootloader most likely wouldn't help as just removing Magisk leaving bootloader unlocked makes Barclays app working perfectly. So they still just detect root and Magisk some other way. What was interesting was that when I removed Magisk and Barclays functionality was restored I run hidden Magisk app to restore Magisk. It asked to restore main Magisk app that I did. And even without restoring Magisk partition and rebooting Barclays stopped working having only Magisk app installed without root.
reg66 said:
I'm in the same boat. Magisk delta with zygisk and app hidden etc etc incl. deny list latest Barclays app still detects root. Have even tried deleting Fox folder, in case it starts seeing that recovery folder. Tried lastest canary build, still the same. Anyone had success with running the latest Barclays app rooted? Poco F3 user BTW, but the principles should be the same...
Click to expand...
Click to collapse
Try downloading an app called Ice Box and freeze Magisk with it.
That fixed the issue for the bank app I use.
See my replies here guys Post
All I've posted my notes on the reddit page above
Also I have a Santander account and I could never get this app working either!!!
Note this method still doesn't work on Santander!!
sound2005 said:
See my replies here guys Post
All I've posted my notes on the reddit page above
Also I have a Santander account and I could never get this app working either!!!
Note this method still doesn't work on Santander!!
Click to expand...
Click to collapse
Followed steps exactly. Still root is detected
reg66 said:
Followed steps exactly. Still root is detected
Click to expand...
Click to collapse
Thanks for replying back.
What issues did you get, ie FC, root detected etc..?
I'm going to keep trying on my phone and see if I can get this working
Ok guys, this method works 100%!!!
Test on my Samsung Note 8 (Android 10, Custom Rom)
Install this module:
GitHub - HuskyDG/MagiskHide at v1.6
Portable MagiskHide. Contribute to HuskyDG/MagiskHide development by creating an account on GitHub.
github.com
and wipe Barclays data, thats it!!!
Best to have Zygisk off and configure the denylist to get this working
Configure Magisk apps​
As Magisk app does not allow you to configure denylist when zygisk is off. You must toggle Zygisk on temprorily (not reboot) to configurate denylist and toggle Zygisk off after done.
Note that any modules that uses Zygisk will be disabled!!
sound2005 said:
Ok guys, this method works 100%!!!
Test on my Samsung Note 8 (Android 10, Custom Rom)
Install this module:
GitHub - HuskyDG/MagiskHide at v1.6
Portable MagiskHide. Contribute to HuskyDG/MagiskHide development by creating an account on GitHub.
github.com
and wipe Barclays data, thats it!!!
Best to have Zygisk off and configure the denylist to get this working
Configure Magisk apps​
As Magisk app does not allow you to configure denylist when zygisk is off. You must toggle Zygisk on temprorily (not reboot) to configurate denylist and toggle Zygisk off after done.
Note that any modules that uses Zygisk will be disabled!!
Click to expand...
Click to collapse
I'd tried this with Zygisk off but then USNF had become off and device didn't pass Safetynet. Then with Zygisk on and this module on Barclays still showed 0006. Denylist was configured for Barclays and not enforced.
atreal said:
I'd tried this with Zygisk off but then USNF had become off and device didn't pass Safetynet. Then with Zygisk on and this module on Barclays still showed 0006. Denylist was configured for Barclays and not enforced.
Click to expand...
Click to collapse
Try switching Zygisk on and off.
Reboot phone, wipe data and cache for play store and Barclays and try again mate
sound2005 said:
Try switching Zygisk on and off.
Reboot phone, wipe data and cache for play store and Barclays and try again mate
Click to expand...
Click to collapse
Well. Have to put thoroughly what exactly I meant been done.
1. Added Magiskhide module to Magisk and turned it on. Magisk was last stable 25.2
2. Uninstalled Barclays. Installed Barclays without running it yet.
3. Add Barclays to Denylist. Turn Zygisk off.
Reboot
4. Checked Safetynet with YASNAC. It failed. Checked modules page in Magisk - USNF was off apparently as Zygisk was off. YASNAC had been passed before all this attempts with this module when USNF was on.
4. Run Barclays - 0006.
5. Clear Barclays data. Turn Zygisk on in Magisk.
Reboot
6. YASNAC passed as USNF became on.
7. Run Barclays - 0006
And may I ask to give some light on what is meant that "it is better to keep Zygisk off". What does this "better" mean? Must be off? Then how do they mean to bypass Safetynet with USNF off?
atreal said:
Well. Have to put thoroughly what exactly I meant been done.
1. Added Magiskhide module to Magisk and turned it on. Magisk was last stable 25.2
2. Uninstalled Barclays. Installed Barclays without running it yet.
3. Add Barclays to Denylist. Turn Zygisk off.
Reboot
4. Checked Safetynet with YASNAC. It failed. Checked modules page in Magisk - USNF was off apparently as Zygisk was off. YASNAC had been passed before all this attempts with this module when USNF was on.
4. Run Barclays - 0006.
5. Clear Barclays data. Turn Zygisk on in Magisk.
Reboot
6. YASNAC passed as USNF became on.
7. Run Barclays - 0006
And may I ask to give some light on what is meant that "it is better to keep Zygisk off". What does this "better" mean? Must be off? Then how do they mean to bypass Safetynet with USNF off?
Click to expand...
Click to collapse
Hi
By all means you can try my setup:
Modules enabled:
Magiskhide (by Husky)
Magiskhide Props Config
Systemless host
Magisk v25.2 hidden
Denylist has been configured and Zygisk switch is off.
In Denylist I have the following as blocked:
Google play store
Google play services
My bank app
Oysercard app
Please note I've messed around extensively trying to get this to work and a lot of stuff I've added and remove to test out, so some modules (or even apps on the denylist) may no longer need to be there.
Also on step 3, could you turn Zygisk on (the app will tell you to reboot to apply changes) but do not reboot yet!!!, then turn off Zygist then reboot your phone.
Once rebooted clear cache and data for play store and Barclays
Then try banking app again.
If this still doesn't work, you may have a module triggering Barclays to recognise you have root, in which case you may need to disable/remove said modules.
One prime culprit would be Lsposed, if you have this then remove this as well.
Also please note, taken from developers site:
Configure Magisk apps
As Magisk app does not allow you to configure denylist when zygisk is off. You must toggle Zygisk on temprorily (not reboot) to configurate denylist and toggle Zygisk off after done.