I recently purchased my Huawei 8 FRD-AL10 on Gearbest and it came with nougat installed with all languages available. Firmware seemed to be very clean, no chinese applications, only some games that I easily unninstalled.
I used the phone for a few days until an update appeared on my phone. I don't recall the exact name of the update, other than it required a 2.41 GB download. The update was left to run on its own, with plenty of battery still left on the phone.
When I came back to check the phone it was sitting on Huawei eRecovery. Rebooted the phone but it always seems to get back to eRecovery no matter what I do.
If i restart the phone by pressing POWER and VOL + and choose the option to recover to factory defaults, it will do its thing all the way to 100%. Once I restart the phone it will always go back to eRecovery.
I reached Huawei by phone and they claim the support is out of coverage as the phone is designed for the chinese market.
Is there a way to recover the phone?
I loaded the stock android 6 rom marshmallow for FRD-AL10 available on the forum onto an SD card.
Inserted the SD card on the phone and pressed both volume (VOL + and VOL-) and POWER buttons, to force the upgrade. It then eventually fails with the following error message "Software install failed! Incompatibility with current version. Please download the correct update package!"
Removed the SD card and booted the phone and connected the usb cable and a prompt came up to install a device named HUAWEI L19.
How can this be? Why is my phone being detected as a FRD-L19?
htctouch2PT said:
I loaded the stock android 6 rom marshmallow for FRD-AL10 available on the forum onto an SD card.
Inserted the SD card on the phone and pressed both volume (VOL + and VOL-) and POWER buttons, to force the upgrade. It then eventually fails with the following error message "Software install failed! Incompatibility with current version. Please download the correct update package!"
Removed the SD card and booted the phone and connected the usb cable and a prompt came up to install a device named HUAWEI L19.
How can this be? Why is my phone being detected as a FRD-L19?
Click to expand...
Click to collapse
I think you purchased a Chinese variant withUS firmware, that's what I can conclude from what you say
htctouch2PT said:
I recently purchased my Huawei 8 FRD-AL10 on Gearbest and it came with nougat installed with all languages available. Firmware seemed to be very clean, no chinese applications, only some games that I easily unninstalled.
I used the phone for a few days until an update appeared on my phone. I don't recall the exact name of the update, other than it required a 2.41 GB download. The update was left to run on its own, with plenty of battery still left on the phone.
When I came back to check the phone it was sitting on Huawei eRecovery. Rebooted the phone but it always seems to get back to eRecovery no matter what I do.
If i restart the phone by pressing POWER and VOL + and choose the option to recover to factory defaults, it will do its thing all the way to 100%. Once I restart the phone it will always go back to eRecovery.
I reached Huawei by phone and they claim the support is out of coverage as the phone is designed for the chinese market.
Is there a way to recover the phone?
Click to expand...
Click to collapse
My friend has the same exact problem that you are writing here about. Could you send me the link you have to android 6.0 you found for the FRD-AL10. I will search around and get back to you.
If it's as I think it is, you need to rebrand your phone to AL10 or use MM of L19
Rommco05 said:
Hi, I'm not sure about waht u write. So, your bootlader was locked or no? You already install firmware? Because is better to finding fw on original/Honor source. Can u post a link from whitch u download firmware? Here is many ways but waht is your issue, phone was renamed to FRD-L19...?
Click to expand...
Click to collapse
To make it simple. Long story short, bought phone from gearbest, you can check the details here. Phone is an FRD-AL10 intended for chinese market and officially comes with chinese/english, but as you can see on gearbest its "unlocked for european use" and they upgraded to nougat added extra languages to the phone before they shipped it to me . They unlocked the phone and debranded it to its european counterpart (honor 8 FRD-L19) which has very similar hardware.
Phone arrived to me with broken seal, and sure enough it had all the languages and emui 5.0 (which is not stock version) installed on it.
In regards to the stock firmware for AL10 I was able to find it here
PalakMi said:
If it's as I think it is, you need to rebrand your phone to AL10 or use MM of L19
Click to expand...
Click to collapse
That makes sense. If I load the AL10 firmware it show an error message because the info on the phone is for model L19.
Any guides on how to do it? It might be also useful for other users in the same situation as me.
PalakMi said:
I think you purchased a Chinese variant withUS firmware, that's what I can conclude from what you say
Click to expand...
Click to collapse
FRD-L19 its the european version of Honor 8.
FRD-AL00 >>> China version (?) (32 GB)
FRD-AL10 >>> China version with 4GB Ram + 64 GB Rom
FRD-AL09 >>> EU version 32 GB
FRD-AL19 >>> EU version 64 GB
FRD-AL04 >>> US version 32 GB
FRD-AL14 >>> US version 64 GB
Please check this thread for details
L04 L14 are for US
L09 L19 are for EU, that's what I know
PalakMi said:
L04 L14 are for US
L09 L19 are for EU, that's what I know
Click to expand...
Click to collapse
From the info I found on the other threads, you are correct. There is a thread here that explains the different versions.
FRD-AL00 >>> China version (?) (32 GB)
FRD-AL10 >>> China version with 4GB Ram + 64 GB Rom
FRD-AL09 >>> EU version 32 GB
FRD-AL19 >>> EU version 64 GB
FRD-AL04 >>> US version 32 GB
FRD-AL14 >>> US version 64 GB
Rommco05 said:
So if I good understand your phone arrives to u opened? U rebrand phone or somebody other and now u have FRD-L19 firmware?
Click to expand...
Click to collapse
The box came with broken seal, that's correct. When I first turned on the phone for initial setup I noticed that it included ALL languages available but the phone should come stock with English and Chinese ONLY.
It came with emui 5 (android 7) installed BUT the latest stock official rom for this model (AL10) is emui 4 (android 6). Only european models have emui 5 available.
So, to my understanding, the phone did not come stock from factory with nougat, they changed it to make it "european" before sending it to me. This explains why the box seal was broken. Please check gearbest listing details for my phone here.
They should be ashamed from their selves
PalakMi said:
They should be ashamed from their selves
Click to expand...
Click to collapse
They are not, unfortunately! I have a ticket raised with them and they are denying the whole thing even when I told them straight that the stock emui 4 (android 6) that comes factory stock with this model (FRD-AL10 chinese model) does not have all languages as they advertise.on their site. Only non-chinese versions of honor 8 do come with all languages and emui 5.
Also they are avoiding answer the question on how emui 5 came installed on the phone when the listing says emui 4.
Ah, I am shocked right now
Anyone else that might bought the phone on gearbest that would like to share their story and how you have overcome the issue?
htctouch2PT said:
I recently purchased my Huawei 8 FRD-AL10 on Gearbest and it came with nougat installed with all languages available. Firmware seemed to be very clean, no chinese applications, only some games that I easily unninstalled.
I used the phone for a few days until an update appeared on my phone. I don't recall the exact name of the update, other than it required a 2.41 GB download. The update was left to run on its own, with plenty of battery still left on the phone.
When I came back to check the phone it was sitting on Huawei eRecovery. Rebooted the phone but it always seems to get back to eRecovery no matter what I do.
If i restart the phone by pressing POWER and VOL + and choose the option to recover to factory defaults, it will do its thing all the way to 100%. Once I restart the phone it will always go back to eRecovery.
I reached Huawei by phone and they claim the support is out of coverage as the phone is designed for the chinese market.
Is there a way to recover the phone?
Click to expand...
Click to collapse
Hi htctouch , we can fix the phone. I can help u here even change to different country version . Can i know which country u are from ? And which model do u wish to the change the device? This way u can even get much support from the same country u live
gopinaidu77 said:
Hi htctouch , we can fix the phone. I can help u here even change to different country version . Can i know which country u are from ? And which model do u wish to the change the device? This way u can even get much support from the same country u live
Click to expand...
Click to collapse
Thanks mate! I sent you pm.
Rommco05 said:
Im shocked too. I know about shop where presale returned phones, but 1. with original firmware and is BIG info about that and MUCH better price!! U can send phone back and take back money?
Click to expand...
Click to collapse
I have a ticket raised with gearbest and they are denying the fact that they sold me a phone with broken seal and emui 5, so how can I trust them? Since the phone now only boots to eRecovery I have no possible way to prove that the phone has emui 5.
I am afraid that if i ship it back to them, through their service, they will come up with an excuse, that I broke the phone in the first place, since they already have the phone and my money on their side. The real problem is that I have now trust faith on their service!
htctouch2PT said:
I have a ticket raised with gearbest and they are denying the fact that they sold me a phone with broken seal and emui 5, so how can I trust them? Since the phone now only boots to eRecovery I have no possible way to prove that the phone has emui 5.
I am afraid that if i ship it back to them, through their service, they will come up with an excuse, that I broke the phone in the first place, since they already have the phone and my money on their side. The real problem is that I have now trust faith on their service!
Click to expand...
Click to collapse
Forgot about them bro . Am ready to help u now , kindly make a thread and mention me in ur post. Only the issue and solutions should be there. No more third discussions crap:highfive::victory:
htctouch2PT said:
I recently purchased my Huawei 8 FRD-AL10 on Gearbest and it came with nougat installed with all languages available. Firmware seemed to be very clean, no chinese applications, only some games that I easily unninstalled.
I used the phone for a few days until an update appeared on my phone. I don't recall the exact name of the update, other than it required a 2.41 GB download. The update was left to run on its own, with plenty of battery still left on the phone.
When I came back to check the phone it was sitting on Huawei eRecovery. Rebooted the phone but it always seems to get back to eRecovery no matter what I do.
If i restart the phone by pressing POWER and VOL + and choose the option to recover to factory defaults, it will do its thing all the way to 100%. Once I restart the phone it will always go back to eRecovery.
I reached Huawei by phone and they claim the support is out of coverage as the phone is designed for the chinese market.
Is there a way to recover the phone?
Click to expand...
Click to collapse
This is what worked for me:
I could not access my phone or even boot into Android to get the Product ID to get the UNlock code for the bootloader etc.
1. Initially my phone was in a boot-loop where it stops at the Huawei eRecovery screen and would not download or update via WiFi.
2. So the 1st step was to download a rollback package for my specific model - FRD-AL10. Then I used the "dload" method (SD Card > "dload" folder, Pwr+Vol UP+ Vol Down) to apply the rollback from whatever it was to FRD-AL10...B135. Succeeded perfectly.
3. Then I downloaded the stock firmware for FRD-AL10, Chinese model, non-specific and again used used the "dload" method to flash the stock firmware to the phone. Succeeded perfectly.
4. The phone rebooted to a 'out-of-the-box' first start-up screen prompting me to select the the Region. Thereafter the Language, WiFi, Agreement, etc and then started looping again to where it went back to the "Selection" screens > Region, Language, WiFi, Agreement, etc. > loop again back to Region, Language, etc.
5. I flashed the firmware again using the "dload" method with the same result.
Note: All other posts suggested I had to 'unlock' the bootloader, root the phone, etc. Unfortunately I did not have access to Android on the phone to get the Product ID, to get the UNlock code, etc. This is where I got stuck. I used different tools, but none would work as the bootloader / phone was LOCKED & the phone UNrooted, FRP was locked.
6. Then I used "Huawei DC Unlocker". I had to buy credits first - 15 Euros. Then used "Huawei DC Unlocker" to essentially "UNLOCK" the phone, it did not "UNLOCK" the bootloader, but it did something to the "FRP" locked issue.
7. I restarted the phone in "SAFE" mode. I was again presented with the "Selection" screens > Region, Language, etc, BUT this time the phone booted into Android.
8. Rebooted the phone in "Normal" mode and it booted into Android. NOW I had access to the dial-pad and could now get access to "Developer" options like USB debugging, get the Product ID of the phone to get the UNLOCK code from Huawei, etc.
9. Once I had all the information I needed, I then 'unlocked' the bootloader by following the instructions from Huawei's website using "fastboot.exe" etc.
10. I then followed 'debranding' instructions from posts elsewhere on XDA to convert the phone from FRD-AL10 to FRD-L09/L19 firmware. (https://forum.xda-developers.com/honor-8/help/help-honor-8-chinese-t3489773/page3)
I hope this information will help someone.
Related
Hi,
I got the Huawei Ascend G525 as a gift from brother in law living in china, and now I am in a bind that it does not have the google play, i installed it using the apk file for google play but the whole UI is in Chinese settings , and the usual Chinese OS version issues for english user >_< , I managed to find and download German firmware (sorry forgot the link to post where it was) and tried to install it but the update failed. Further research led me to believe that i have to unlock its bootloader and I tried to use the method on huawei site (using adb toolkit) but for that i need bootloader unlock key and the site options to get key from huawei does not have G525 in list, so I am back to square one, Please let me know how i can unlock bootloader of Huawei G525 and if there is a new firmware I can use or something like flashing phone rom with Odin (I did flash my galaxy tab 2.0 with odin with new UK firmware)
The Android version is 4.1.2
and firmware file name, i download is Ascend_G525_firmwareú G525-U00,Android 4.1,Emotion_UI,G525-U00 V100R001C00B188,West_Europe
my mobile current firmware is G525-U00V100R001CHNC00B180
Please any help will be useful.
saleemafaq said:
Hi,
I got the Huawei Ascend G525 as a gift from brother in law living in china, and now I am in a bind that it does not have the google play, i installed it using the apk file for google play but the whole UI is in Chinese settings , and the usual Chinese OS version issues for english user >_< , I managed to find and download German firmware (sorry forgot the link to post where it was) and tried to install it but the update failed. Further research led me to believe that i have to unlock its bootloader and I tried to use the method on huawei site (using adb toolkit) but for that i need bootloader unlock key and the site options to get key from huawei does not have G525 in list, so I am back to square one, Please let me know how i can unlock bootloader of Huawei G525 and if there is a new firmware I can use or something like flashing phone rom with Odin (I did flash my galaxy tab 2.0 with odin with new UK firmware)
The Android version is 4.1.2
and firmware file name, i download is Ascend_G525_firmwareú G525-U00,Android 4.1,Emotion_UI,G525-U00 V100R001C00B188,West_Europe
my mobile current firmware is G525-U00V100R001CHNC00B180
Please any help will be useful.
Click to expand...
Click to collapse
can you tell me where did you downloaded that kind of firmware? can I have a link? thanks..
jeehuu91 said:
can you tell me where did you downloaded that kind of firmware? can I have a link? thanks..
Click to expand...
Click to collapse
If you tell me the block name of recovery I will make backup for you
Until I´m not 100% sure which block it is I will not replace stock recovery against cwmr.
cmoegele said:
If you tell me the block name of recovery I will make backup for you
Until I´m not 100% sure which block it is I will not replace stock recovery against cwmr.
Click to expand...
Click to collapse
I don't know how to determine the block name my handset's recovery... how do I know that? Thanks...
my fear is, that we both have problems for flashing.
The unlock code for the bootloader you can get from huawei directly.
I tried this on my European version, but this will not be offered from Huwaei ( only chinese versions).
So I´m still not able to flash chinese Rom (b191) or any other Miui or Lewa Rom ,...
I also confirm the lack of bootloader unlock request in Huawei's website.
What did you do to get the bootloader unlock code? Did you send an e-mail? Where?
I also find myself in a dead end, because I try to get a backup of the current ROM in the phone, connect succesfully through adb (downloaded drivers from here ) however following instructions from here:I can not connect the device with "fastboot devices" (i get to Huawei Device devices in windows device manager with yellow exlamation mark and the phone has been booted in a pink background, i think this is the bootloader mode because I have done it with all three buttons, power, vol+, vol-). Do you think this is a locked bootloader problem?
Late reply and updates
Hi,
Sorry for not following post, (i think i accidently turned off the option to inform me of new replies via email)
I tried emailing to both the german support email and the chinese, chinese support email gave me no reply even though i mailed them 3 times, but german one did and said that my phone is from china so they can't provide any support,
I tried to talk to them on facebook and local Huawei support center, facebook, no help, though someone else was willing to him and thanks to him poiting to way how to install english super use i am able to see almost all system messages in english, and as for the local support, since its not launched here they said they can't do anything,
The problem at hand was that it was not launched any where else, so no english version firmware i could find,
I almost bricked phone when i played with the "sorry forgot name" sytem file where it said to include the contact mismatch to 10 so that i can see the contacts name in the messages (its from china so least match is 11) and thanks to my luck i was able to upgrade firmware to b191 from b180 on 3rd try and since then i am scary cat to do anything with phone,
and now i read that its being launched in UAE, so looking forward if they put new firmware download on english website, (hoping they dont wait for an update to put it on website and put the current stock one)
please update me if you can get your hands on new english firmware , ty
firmware link
jeehuu91 said:
can you tell me where did you downloaded that kind of firmware? can I have a link? thanks..
Click to expand...
Click to collapse
hi, i have the link but since i am new, site wont let me post link, u can PM me for it
theoxarhs said:
I also confirm the lack of bootloader unlock request in Huawei's website.
What did you do to get the bootloader unlock code? Did you send an e-mail? Where?
I also find myself in a dead end, because I try to get a backup of the current ROM in the phone, connect succesfully through adb (downloaded drivers from here ) however following instructions from here:I can not connect the device with "fastboot devices" (i get to Huawei Device devices in windows device manager with yellow exlamation mark and the phone has been booted in a pink background, i think this is the bootloader mode because I have done it with all three buttons, power, vol+, vol-). Do you think this is a locked bootloader problem?
Click to expand...
Click to collapse
I send a short Email to [email protected] asking for the unlock code on saturday 7-12-2013.
Dear sir/madam,
I tried applying for a bootloader unlock code at unlock url which I cannot post because of XDA forum restricting me, but my device (Ascend G525) was not listed. I supply the data via this mail in the hope to get a bootloader unlock code via this way instead.
Product Model: Huawei Ascend G525
SN: ****************
IMEI: ****************
ProductID: ****************
I hope to hear from you soon.
Yours sincerely,
******************
Click to expand...
Click to collapse
I immediatly got a response from Huawei on monday.
Dear Customer,
Thank you for supporting Huawei device.
Your unlock code : ***************** ,please keeping your unlock code properly. Thank you!
Huawei Terminal Company limited
Click to expand...
Click to collapse
That's the good news, the bad news is that as far as connecting to my device I got as far as you got. As I'm on Ubuntu 13.04 64bit I added the usb rule needed for Huawei devices. It shows up when I execute "./adb devices". When I boot into hboot/fastboot mode by pressing the volume buttons and the on button I get the pink screen, but it does not show up when I run "./fastboot devices".
Anybody who knows how I can get fastboot to connect to a Huawei G525?
---------- Post added at 03:58 PM ---------- Previous post was at 03:09 PM ----------
My bad, I thought I was starting the device in fastboot mode, but the pink screen denotes the download mode. I looked up the instructions to start the device into fastboot mode at sigmakey[dot]com. The complete list of steps that I followed were
Remove battery for >= 10 seconds
replace the battery
hold volume down and power button
when the screen locks on the Huawei logo you're in fastboot mode
connect the device via USB
run:" fastboot devices" and see if it's listed
run: "fastboot oem unlock [unlockcode]"
HUAWEI ASCEND G525 bootlock?
Got my phone 6 days ago. Rooted it.
Third day I messed it up by deleting languages (stupid, but selected them with a cleaner & removal tool).
I formatted a micro sd card, downloaded original firmware, started up in the installation mode but while busy unpacking, "installation failed".
Is it because of a bootlock? or is it something else.
Is there an boot unlocker for download for the G525? The phone doesn't start up, so I can only work out of the boot menu or sd card.
All tips are welcome.
try again
Jopiextra said:
Got my phone 6 days ago. Rooted it.
Third day I messed it up by deleting languages (stupid, but selected them with a cleaner & removal tool).
I formatted a micro sd card, downloaded original firmware, started up in the installation mode but while busy unpacking, "installation failed".
Is it because of a bootlock? or is it something else.
Is there an boot unlocker for download for the G525? The phone doesn't start up, so I can only work out of the boot menu or sd card.
All tips are welcome.
Click to expand...
Click to collapse
Where did you buy your phone from? Mine is from china , the bootunlocker is required to install custom rom (what i came to conclusion, from forums etc, corrsct me if it isn't the case), or rom other than compatible one, my has CHN in its firmware name and the firmware from chinese sites can only be used to update chinese firmware, i wanted to install the german firware for google play(now i achv through apk) and msg and phone number string match(Still found no soluton for it).
Now coming to your issue, i accidently deleted a system file too and phone won't start, so i downloaded firmware , copied the update folder as instructed in the pdf with it, but installation failed, being desperate, i tried again and again , and it would fail some point during extraction, but then on 6th or 7th attempt the file went threw, so either take your phone to support center best solution i would say, or try installing it a few times, try using a different sd card with better speed, but sorry cannot give a conclusive solution. ( Haven't messed with phone again )
saleemafaq said:
Where did you buy your phone from? Mine is from china , the bootunlocker is required to install custom rom (what i came to conclusion, from forums etc, corrsct me if it isn't the case), or rom other than compatible one, my has CHN in its firmware name and the firmware from chinese sites can only be used to update chinese firmware, i wanted to install the german firware for google play(now i achv through apk) and msg and phone number string match(Still found no soluton for it).
Now coming to your issue, i accidently deleted a system file too and phone won't start, so i downloaded firmware , copied the update folder as instructed in the pdf with it, but installation failed, being desperate, i tried again and again , and it would fail some point during extraction, but then on 6th or 7th attempt the file went threw, so either take your phone to support center best solution i would say, or try installing it a few times, try using a different sd card with better speed, but sorry cannot give a conclusive solution. ( Haven't messed with phone again )
Click to expand...
Click to collapse
Thanks!!!
I live - and bought mine - in Holland (the Netherlands).
I downloaded firmware too but when in download mode and with SD card in, the update stops ("Update failed").
How did your rom/firmware come trough? By updating from sd card or by downloading update directly from sd card?
Which firmware or rom did you download?
Ask Huawei support center
Hi,
First is there no support center for Huawei in your area ? In my case i got the mobile as gift from china and since this model G525 is not launched in my country, the support center refused on any support regarding firmware, so i went to chinese site http://consumer.huawei.com/cn/ and got the firmware from there, my previous firmware was B180 and then i updated it to B191 (currently available on china site).
Second where did you download the firmware from ? Because when i was trying to install the firmware from europe or us etc, (main reason the contacts least string match issue) , i could not find any firmware file on those sites, i went through all the sites, I even emailed german support , and they refused that they don't have any firmware, duh, because my mobile IMEI was not in their data base , (no ****), i do manage to find one posted by someone while going throw forums, but it failed to install, which lead me to believe i need bootunlock code
As for the update is concerned, I am not sure what are you asking about updating from SD card or downloading from SD card ? The only method Huawei G525 have is to download file to computer, extract it, put the update folder in the formatted sd card and then start the phone with volume keys so it start downloading file from sd card and then update firmware. Even the option from the settings to update firmware requires the same, just that , phone start itself in download mode and start the same process.
Like i said i don't have a specific answer why the update is failing, but most probably because the firmware you are trying to install does not support the current you have, I don't know why the hell they would put a restriction in update package to lock down it with previous firmware region. Since you might not know which firmware you previously had the new one might not support the old version, like B191 requires to have B182 or higher version, (wtf) mine came with B180, and there is no B182 or higher available for download, so it could be your phone has old firmware, not supported by current, so all i can say is better take it to customer service, and ask them for help,
and the method i mentioned is was just hit and trial, i was just desperate, so i kept phone pushing to update it.
Let me know if you find any better solution or how to install other firmwares
German Firmware
Hi, for those looking for german firmware , here is the forum link,
http://www.android-hilfe.de/huawei-...ware-vom-europaeischen-geraet-ausstatten.html
go to the Digitdia post , and get the download link,
Don't know if forum allows me to post other forums links, but i do not want to take credit by posting the download link, so please visit the site, if you do not want to here is the download link anyway
http://rom.android-host.de/HUAWEI/G525/B188/G525_U00_B188.zip
Both,
Thank you very much for the reply.
I rooted my phone, so if I send it to the wervice centre, I'll have to pay ******** lots of money.
So, I will keep trying to find the right firmware (update) for my phone.:good:
EDIT: Sal, the link WORKED. So it WAS the Western-Europe firmware i needed. Super, great, thanks!
ascend g525 can i update to german firmware
Jopiextra said:
Both,
Thank you very much for the reply.
I rooted my phone, so if I send it to the wervice centre, I'll have to pay ******** lots of money.
So, I will keep trying to find the right firmware (update) for my phone.:good:
EDIT: Sal, the link WORKED. So it WAS the Western-Europe firmware i needed. Super, great, thanks!
Click to expand...
Click to collapse
My firmware is g525-U001v100r001c00b189 can I try western Europe firmware
I have unlocked boot loader even I deleted something when rooted my phone worked but gave some bug
Is this English
Please help
I have the same query, mine is G525-U00V100R001C00B187 are the links for Europe or Germany applicable to my device? I want to have a fall back before I start tinkering with my device and rooting it... If anyone can shed some light on this, it will really be a great help...
Update: Looks like its a European firmware, based on this, http://www.android-hilfe.de/huawei-ascend-g525-forum/482260-chinesisches-g525-mit-einer-software-vom-europaeischen-geraet-ausstatten.html.
g525 firmware
here list of huawei firmware release
http://asanfile.com/file?path=huawei/flash file/g525 - u00/android 4.1/
plz help how to unlock bootloader i already got unock code from huawei but i dont how to unlock or waht software is needed
just to help unlock
http://www.modaco.com/topic/362152-unlocking-bootloader-oficially-with-the-code-of-huawei/
i found this site i hope its helpful to you unlocking bootloader
credits to him if it'll help
i've tried it and it works (g525)
as for locking codes just go to huawei site posted earlier in this thread
raenne said:
i found this site i hope its helpful to you unlocking bootloader
credits to him if it'll help
i've tried it and it works (g525)
as for locking codes just go to huawei site posted earlier in this thread
Click to expand...
Click to collapse
Thanks for this Link.
Hi all,
I bought a H60-L12, but the manufacturer had installed the H60-L02 rom (version H60-L02V100R001CHNC00B611).
How can I install the H60-L12 version?
I've already tried to install these 5 ROMS:
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B307
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B611
H60-L12-4-4-V100R001CHNC00B118-unicom-32g
H60-L12-4-4-V100R001CHNC00B119-High-unicom
H60-L12-V100R001CHNC00B121
But I always get the error "Software Install Failed!" with the volume + & - & power method.
Also tried with the *#*#2846579#*#* and didn't worked as well.
Tried to install different stock versions and nothing.
What should I do more?
Regards,
Luis
Check INDEX
"For L12 Users ONLY" Sections you might need to restore correct version stock local.prop and build.prop
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Julsen1985 said:
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Click to expand...
Click to collapse
hi have you succeded to install L12? i found that you may need to install the L12 recovery image first and then you can flsh back to your L12 firmware have you tried?
henr721 said:
hi have you succeded to install L12? i found that you may need to install the L12 recovery image first and then you can flsh back to your L12 firmware have you tried?
Click to expand...
Click to collapse
Hi, yes I did. I wrote the way here (in german)
http://www.iphone24.org/blog/howtos...ielle-firmware-zurueck-flashen-full-restore-1
An thermalboyz included it into his collection here: http://forum.xda-developers.com/honor-6/general/huawei-honor-6-index-t2963209
Scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
From huawei club forum, which posted by Chinese, they provided a "middle package" for H60-L02/L12, L01/L03/L11/L21:
Link for refer: http://club.huawei.com/thread-4744481-1-1.html
中转包地址如下：
荣耀6移动版（H60-L01/L03/L11/L21）
荣耀6联通版（H60-L02/L12）
We have to download it, then do upgrade it first before upgrade ROM version.
P/S: If you cannot extract it, may need rename it from chinese name to latin letter.
If need assist in Chinese word, let me know.
Hope this help.
lmpcruz said:
Hi all,
I bought a H60-L12, but the manufacturer had installed the H60-L02 rom (version H60-L02V100R001CHNC00B611).
How can I install the H60-L12 version?
I've already tried to install these 5 ROMS:
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B307
H60-L12_EMUI3.0_Android4.4_V100R001CHNC00B611
H60-L12-4-4-V100R001CHNC00B118-unicom-32g
H60-L12-4-4-V100R001CHNC00B119-High-unicom
H60-L12-V100R001CHNC00B121
But I always get the error "Software Install Failed!" with the volume + & - & power method.
Also tried with the *#*#2846579#*#* and didn't worked as well.
Tried to install different stock versions and nothing.
What should I do more?
Regards,
Luis
Click to expand...
Click to collapse
Julsen1985 said:
I have the same problem but I am on version L04 at the moment and can not got back to L12. My phone is not rooted nor unlocked. I asked the support of Huawei via mail but till now no reaction from their side...
Click to expand...
Click to collapse
Julsen1985 said:
Hi, yes I did. I wrote the way here (in german)
http://www.iphone24.org/blog/howtos...ielle-firmware-zurueck-flashen-full-restore-1
An thermalboyz included it into his collection here: http://forum.xda-developers.com/honor-6/general/huawei-honor-6-index-t2963209
Scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Click to expand...
Click to collapse
Hi all, I'm new of the forum, and this seems to be exactly the same issue I'm having.
I had to buy a replacement for my H60-L12 and I decided to buy a new one, so I went to the same store and I ordered the same phone.
When it arrived, the label indicate H60-L12, bon on the box and on the back of the phone. But when I switched on, the model name and the serial number indicated the H60-L02.
What is really strange is that, according to what I have been seeing on technical specification on internet, the L02 should have 16GB di memory, while this one has 32GB.
Do you have any idea if it is possible to verify from the IMEI what is the real model of the phone and if it is possible that a L02 firmware version was installed on a L12? I have the B316, I have tried to dowload the B316 for the L12 and put it on the dload folder, then local update, but it fails (probabily because it is the same version?).
I have download the H60-L02/L12 file indicated in the previous post, but it is very small. Is it ok?
After I have installed it using the local update procedure, what should I do?
Thanks!
I will share my experience with this issue.
As it turned out, my L12 was flashed with the wrong firmware and seens as a L02.
No way to restore the correct version with any more or less standard procedure (not even copying the built and prop files from the L12, the upgrad was always failing).
So, for future reference, what I did was:
- use the unbrick function to load a EMUI2.3 version of the firmware (at this point the phone was almost unusable because everything was crashing)
- copied the L12 B316 on the SD in dload directory
- installed using the three button procedure
The upgrade was correctly executed and now everything is working fine.
In case someone was wondering why I didn't use the unbrick function to load the L12 B316, the answer is: I did it, but it was not working. As I said, it seems that the unbrick function leaves a lot of the previous installation behind, and despite the load of the B313 (yes, I tried the 313 to be able to update then to 316 with the complete update package and have a clean installation), the update package was downloaded but not installed, always giving error. Same with the three button procedure.
So, the only way I found has been to revert to 2.3 and then apply the update.
Now I would like to know who flashed the L02 on my L12 and made me loose four days
I'm unable to use Android Pay - I'm not rooted, the boot loader is RELOCKED but when I try and add my card I get the dreaded "Google is unable to verify that your device or software running on it is Android compatible" error.
So, I was wondering, is it the fact that I did previous unlock my boot loader or something else stopping me.
BTW, Vendor: hw Country: eu, running C432B170.
Cheers.
No joy either
Same problem here. Imported mine and have done nothing but update to latest version of official roms (tried a couple of different ones today as well) and I get the same error. No rooting, purposely held off doing so so I could try Android Pay. SafetyNet Helper says the "CTS profile match" is false. My wild stab in the dark is that it is something to do it with it being identified as an international handset or handset from a non-Android pay supported country.
Had a web chat with an Android Pay helpdesk monkey and they had me reboot and reinstall a few times. They've also had me send some screenshots but I'm not holding out much hope for a useful reply.
captainkibble said:
CTS
Click to expand...
Click to collapse
CTS or CSC?
themissionimpossible said:
CTS or CSC?
Click to expand...
Click to collapse
CTS. Just double checked.
Maybe it's the same thing as CSC for Samsung phones.
In case, this might represent the target market for that phone, and that market might not yet be allowed to use Android Pay.
I'm using the single SIM version, NXT-L09, I managed to add my card but when I tried to pay for something in store I got the unable to verify.... message pop up on screen.
It also fails the CTS profile match in Safetynet helper
Android Pay worked for me today
I gave safetynet helper another try and this time it said my device passed. Re added my card to it and then used it on a London bus.
Using a Mate 8 NXT-L09C636B170
I too am able to use Android Pay. It started working for me last Thursday. While I had an open support ticket with the Android Pay help desk I periodically checked to see if it had started working. Eventually it did. I was able to add cards, SafetyNet Helper passed it's check and I was able to make payments. Result.
The same day, Android Pay help desk got back to me regarding my support ticket (there had been some backwards and forwards with logs, screenshots and the like). They concluded that Android Pay would not work because my phone was rooted. It isn't and has never has been. They had me send screenshots of multiple root checkers that displayed that the phone was not rooted *before* they came to this conclusion. I guess they just wanted the ticket closed and that was the most convenient excuse.
I've put it down to enough people reporting handsets not working that the Google added more phones to the "approved list" and help desks don't know what they are talking about.
My build number is NXT-L29C636B180
Hm.. Well this was interesting to read. Thanks for the updates saying that Android Pay does in fact (hopefully) work! I'm going to to get the L29 International dual SIM version soon so I was curious... I'll update when I get it and test it out
Mine still doesn't work - I then tried upgrading to B320 and I can't even add a card now whereas before I did eventually allow me to add a card. I'm cheesed off with it. Bootloader Locked no root and no Android Pay on a L29C432B320
gnasher666 said:
Mine still doesn't work - I then tried upgrading to B320 and I can't even add a card now whereas before I did eventually allow me to add a card. I'm cheesed off with it. Bootloader Locked no root and no Android Pay on a L29C432B320
Click to expand...
Click to collapse
Same here...
bh4714 said:
Same here...
Click to expand...
Click to collapse
I've downgraded to B170 and now have Android Pay working.
The high level process was:
All done via the help of SRK Tool http://forum.xda-developers.com/mate-8/development/tool-srk-tool-huawei-t3369797
1) Unlock Boot Loader
2) Install Custom Recovery
3) Root Phone
4) Change to oeminfo and custom.bin eu (c432) - Even though I already was
5) Copy Full Update.app for C432B153 to dload folder
6) Flash stock recovery
7) Boot recovery and allow update to install
8) Factory Reset
9) Copy Update.app for C432B170 to dload folder
10) Boot recovery and allow update to install
I'm not sure how but following this process (although I've listed the steps from memory and not in front of my Laptop I did this on) I ended up with a Bootload LOCKED C432B170 and Android Pay works. I've not - nor will I update to and EMUI 4.1 version until they are released as OTA updates that my phone asks me to install
Android Pay was working fine on B103, I've upgraded to B321 via dload and now got pop up info that my device is incompatible with android pay. Any ideas?
Sent from Huawei Mate 8
Just one question
Hi,
Which recovery should I flash? the one for EMUI 4.1 or 4.0?
thanks
I believe Android Pay will not work with EMUI 4.1. I wish we were warned about this before we were allowed to flash to 320 or 321. No warning with the update links. Sucks!
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
HONOR 6 H60-L02 (made in China) totally bricked
Hello,
i’m very disappointed about my phone (H60-L02) because he’s bricked after an Huawei update (6.8.15).
I have wanted to reset the phone because i want to give this phone to my daughter.
I’ve gone to the settings menu to get an new initializie.
The phone has been reseted, but, after that, the phone restarts and stays on the Honor Bootlogo…
I’ve tried to do a new reset with the 3 buttons method. The first time, the recovery menu proposes me to format the phone. I did it. After hat, the phone reboots but, once again, he stays on the Honor bootlogo…
The difference now, is that the 3 buttons method doesn’t works anymore. The menu is not available when i push the 3 buttons…
I can only do a Vol-/Power, wich starts the Fastboot mode. But this one is locked…
The problem is:
– I don’t have the Product ID of my phone (because i’ve never wanted to root it)
– Huawei europe doesn’t want to give me the Unlock code because he’s made in China. And i have no answers from Huawei China.
What can i do? This phone is definitively out?
Somebody can help me?
(sorry for my poor english)
saulescu said:
HONOR 6 H60-L02 (made in China) totally bricked
Hello,
i’m very disappointed about my phone (H60-L02) because he’s bricked after an Huawei update (6.8.15).
I have wanted to reset the phone because i want to give this phone to my daughter.
I’ve gone to the settings menu to get an new initializie.
The phone has been reseted, but, after that, the phone restarts and stays on the Honor Bootlogo…
I’ve tried to do a new reset with the 3 buttons method. The first time, the recovery menu proposes me to format the phone. I did it. After hat, the phone reboots but, once again, he stays on the Honor bootlogo…
The difference now, is that the 3 buttons method doesn’t works anymore. The menu is not available when i push the 3 buttons…
I can only do a Vol-/Power, wich starts the Fastboot mode. But this one is locked…
The problem is:
– I don’t have the Product ID of my phone (because i’ve never wanted to root it)
– Huawei europe doesn’t want to give me the Unlock code because he’s made in China. And i have no answers from Huawei China.
What can i do? This phone is definitively out?
Somebody can help me?
(sorry for my poor english)
Click to expand...
Click to collapse
Before posting search...
http://forum.xda-developers.com/honor-6/general/l02-l12-how-to-emui-4-0-to-emui-3-1-t3318231
Nexus H791 using Tapatalk
You need to have IMEI, serial and device id to get an unlock code. Do you have all that info?
muradulislam said:
You need to have IMEI, serial and device id to get an unlock code. Do you have all that info?
Click to expand...
Click to collapse
No, I .How do you find them? Thanks!
saulescu said:
No, I .How do you find them? Thanks!
Click to expand...
Click to collapse
Invoice, product box.
saulescu said:
No, I .How do you find them? Thanks!
Click to expand...
Click to collapse
Do you have the above?
I'm sorry that you no longer find.Another chance no have? Thanks!
saulescu said:
I'm sorry that you no longer find.Another chance no have? Thanks!
Click to expand...
Click to collapse
Yep, sign into Google with the account you used on that device, go to settings, dashboard, Android and you can find IMEI there.
Connect phone to pc in fastboot mode and fire
Fastboot devices
And you will get serial number (most probably).
Use Huawei hacker toolkit to get your device id and then request a password.
I managed sal start with H60_EMUI3.1_Android5.1_6.1.1 and is in Indonesia with all scris.Mie Miar European version and eventually be passed to a Emui May good.How i do?
saulescu said:
I managed sal start with H60_EMUI3.1_Android5.1_6.1.1 and is in Indonesia with all scris.Mie Miar European version and eventually be passed to a Emui May good.How i do?
Click to expand...
Click to collapse
Can not understand what you want to say here
I managed to turn the phone, with H60_EMUI3.1_Android5.1_6.1.1 but it firmweare Indonesia.
I do not understand anything How do I put europe version? And one more advanced?
saulescu said:
I managed to turn the phone, with H60_EMUI3.1_Android5.1_6.1.1 but it firmweare Indonesia.
I do not understand anything How do I put europe version? And one more advanced?
Click to expand...
Click to collapse
You can give honor multi-tool a try to debrand your phone.
I am not sure whether it supports your phone or not but give it a try.
H60_EMUI3.1_Android5.1_6.1.1 version of what can go?
saulescu said:
H60_EMUI3.1_Android5.1_6.1.1 version of what can go?
Click to expand...
Click to collapse
This is the only mode to unbrick your L02 / L12
This procedure erases all data
Download EMUI 3.1 Developer 6.1.1
https://mega.nz/#F!ztYliaxL!4gfyXozS...BDgBQ!6w5inQ6Z
Extract the zip file and copy UPDATE.app in SD/dload
Insert the SD without connecting
Disconnect the USB cable from your PC
Press the Power button to turn off
When you feel the vibration press 3btn
When appears the Honor logo connect your SD (continue to press 3btn for 3 - 4 seconds)
Wait for the recovery process
Nexus H791 using Tapatalk
I did it!
Go with what you wrote.how to pass a superior version?
saulescu said:
I did it!
Go with what you wrote.how to pass a superior version?
Click to expand...
Click to collapse
You can choose whether to go with developer EMUI 4.0 or EMUI stable 4.0.1.
If you want to get stable EMUI 4.01 you must first use this rollback
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Uodate.app in dload and do a local update from setting
After install B535 from local update
After install B535 - B860
otherwise install incremental updates for EMUI 4.0 developer
Nexus H791 using Tapatalk
I put rollback 591 to Emui 3.0 and tel. show all Emui version 3.1_H60-L02_6.1.1
Can not find B535_B860
saulescu said:
Can not find B535_B860
Click to expand...
Click to collapse
https://mega.nz/#!XVYn1QJC!e5PzE3UZhtZNm7NPyLAVxPLDpNhyN28b1uThpnPxmoE
Nexus H791 using Tapatalk
Unzip or be renamed update.zip.Thanks!
Hello everyone, I need my help, I bought my Honor 8 in Gearbest, version AL-10 (Chinese), but I made the huge mistake in updating, and with that it was only on the screen of eRecovery, searching the internet I found some steps and I did it, but now my cell phone does not call anymore, it's only on the screen with the Blue Honor logo, I can not do anything else, I do not enter eRecovey anymore, I can only enter Fastboot mode, but the phone is locked, Unlock this mode, from what I read I need to unlock it, but I do not have the product id to complete the unlock process, does anyone have any light on how it could make him come back to life?
How do you get it back into eRecovery mode?
Thank you guys
Sorry my english, I do not have much knowledge of the language.
Rommco05 said:
Have you unlocked bootloader?
Click to expand...
Click to collapse
Hello my friend
yesterday I ended up getting
I used a program called DC Phoenix, it unlocks and makes the recording of the new firmware
But now I'm trying to find a correct firmware for my cell phone
He entered cross flash, I installed a version yesterday and when he came up he showed me another version.
Hi alisonduarte,
You bought a chinese model of Honor 8 (AL10). But, did it came with a AL10 firmware or, in most cases of imported models, a rebranded one. (L14 or L19 maybe).
Rebranded chinese models (AL00 and AL10) are known to bootloop with recent firmwares. The last working firmware, for my own rebranded AL00 phone, is B380.
I advise you to rebrand your AL10 to L19, with the help of this link: https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220 (L19 Firmware link is dead, another link here: https://mega.nz/#!ELQXnYgb!H7c0hCSIZ6N3ljMBm8JD21-aaNY3E-1JD0M99dntr7o)
Then update to B380 using "Firmware Finder for Huawei" app -or- "dload" folder method -or- RedLotus method. (For the last one: HiSuite 5.0.1.300 needed, download link here. Use this "filelist.xml" link for FRD-L19C432B380 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v77475/f2/full/filelist.xml)
Good luck! =)