Hi guys, I have a micromax canvas 2.2(a114) i ported miui 7 rom for my device running on miui 5 custom ROM then i had this problem when i started to boot the ROM it shows logo then boot animation loads and after that stuck nothing happens i tried the adb method to take lolcat well i couldn't Annalise it properly and in it showed me it couldn't load 2 to 3 lib .so files as they were not present but that was not a major problem when i connect it to the USB to charge it shows the boot icon with the battery percentage and led icon lit. i dont know what to do the ROM i used to port has exactly all specs of my phones except dpi which is not of a problem but i need help on why it may not be loading completely.And the log is in zip as it exceeded the limits so you have to extract it .
Related
Hi
Ive just "successfully " re-odexed themen JPU, but even all looks like properly done, I get boot logo issue :
I see Samsung logo in the middle of display as normally, but above this logo, there are another one blinking Samsung logo too
It wont happen before re-odex.
After I wiped dalvik cache it does not helped.So I tried make full reset at my phone , it rebooted and it looks like it was solved, but at next restart it happened again :-(
I had definitelly enough space at system folder (45 MB free) , no error message while re-odexing
I know there were some COOKING where I can change boot logo to a lot of nicer , but I am sure it worked upto JPS :cyclops:, not JPU :-(
any tips how to solve it ?
noone ? :crying::crying::crying::crying::crying::crying::crying::crying::crying:
ok, I tried delete stock bootanim file and replace it by bootanimation.zip, looks like working, but i will have to reboot phone moretimes to see if it is solved or not
That happened to me before, just delete "/system/media/bootani.qmg" or just change the bootanimation
i was using CM10 or so i don't exactly remember now.I was using it since 1.5 months back.today suddenly when i opened my bluetooth to trasfer some files ,my phone suddenly restarted and since then whenever i try to open my device it shows CM animation and doesnot moves further and shows the homescreen.i had used AOPK Rom for ICS update and before that the oxygen rom for 2.3 update. i never faced this problem with them.
and to add further my problems ,the Clockwork Mod Recovery is also not working .whenever i try to open CM recovery it shows a YELLOW SCREEN and on it its written -" EMERGENCY MODE". so i am neither able to flash any other rom or last backed up rom.please help.i hope my device is not bricked up as the animation is coming but the phone is not opening up.am i right??
please suggest me what to do to make it work again ...
Thanks for any help.....
Hi Friends,
I need help as my Neo L has stuck on boot animation.
Phone is:
*Rooted
*CWM installed
*Stock ROM
*Bootloader unlocked
Story:
As the phone was lagging a lot and I thought of getting some relief from the sluggish behavior.
Thought of installing a custom ROM.
Found ROm here: Taku Xperia
Flashed custom Vengeance Kernel (phoenix) from: here
The battery was running very low and I flashed the vengeance kernel through flashtool on windows 7.
All options were selected as USB debugging, mock locations, stay awake, MSC etc etc).
After flashing I tried booting the phone in recovery (Power+Volume down key).
Phone given a small vibration and started normally till boot animation (CWM didn't work).
I thought may be I have not pressed the buttons properly, removed the battery and tried again and same thing happened again.
I thought I will flash the stock kernel again and tried switching on.
But Now there is no vibration and phone is showing the "Sony" boot animation only.
I put the phone on charging (4 hrs) and I think its not even charging. There is a red light blinking for some time and the boot animation only.
Please help as I am in Europe and repair at service center will be costlier than the actual price of the phone.
Phone's current state:
*ROM: Stock
*Kernel: Vengeance
*Booting: Yes, upto boot animation (black screen with Sony logo)
*Windows not recognizing the device (tried re-installing the drivers and tried on Vista as well)
*SUS/PC companion not recognizing the device
*Battery seems drained
This is my 1st post on XDA, hence regret if something is not correct.
With Regards
JS91872
js91872 said:
Hi Friends,
I need help as my Neo L has stuck on boot animation.
Phone is:
*Rooted
*CWM installed
*Stock ROM
*Bootloader unlocked
Story:
As the phone was lagging a lot and I thought of getting some relief from the sluggish behavior.
Thought of installing a custom ROM.
Found ROm here: Taku Xperia
Flashed custom Vengeance Kernel (phoenix) from: here
The battery was running very low and I flashed the vengeance kernel through flashtool on windows 7.
All options were selected as USB debugging, mock locations, stay awake, MSC etc etc).
After flashing I tried booting the phone in recovery (Power+Volume down key).
Phone given a small vibration and started normally till boot animation (CWM didn't work).
I thought may be I have not pressed the buttons properly, removed the battery and tried again and same thing happened again.
I thought I will flash the stock kernel again and tried switching on.
But Now there is no vibration and phone is showing the "Sony" boot animation only.
I put the phone on charging (4 hrs) and I think its not even charging. There is a red light blinking for some time and the boot animation only.
Please help as I am in Europe and repair at service center will be costlier than the actual price of the phone.
Phone's current state:
*ROM: Stock
*Kernel: Vengeance
*Booting: Yes, upto boot animation (black screen with Sony logo)
*Windows not recognizing the device (tried re-installing the drivers and tried on Vista as well)
*SUS/PC companion not recognizing the device
*Battery seems drained
This is my 1st post on XDA, hence regret if something is not correct.
With Regards
JS91872
Click to expand...
Click to collapse
you can just flash the stock ftf file using flashtool
http://forum.xda-developers.com/showthread.php?t=2047914
ashjau619 said:
you can just flash the stock ftf file using flashtool
http://forum.xda-developers.com/showthread.php?t=2047914
Click to expand...
Click to collapse
How to flash without battery....
SOLVED !!!
1. Externally charged the battery. (cut an old USB cable and used red wire on +ve and black on negative, left rest as it is. Pluged the usb to charger).and done.
2. Switched on the phone and flashed the proper kernel again
3. Using turbo v3.1+CM10 now
2 days ago i was just going around my advanced junk with clean master app. there was a filed named empty folders which was 11 mb in advanced junk section, so i cleared the file and went to play angry birds, then suddenly it stuck and rebooted. :'( now every time it boots up, shows the boot image, starts the cyanogenmod boot animation and then the boot animation stucks and then the whole process again...REBOOT LOOP
i tried every thing till now:
1. tried to install stock rom through odin but still shows cyanogenmod animation and reboot loops
2.tried to install different recovery but the recovery doesn't changes also.
3. tried to install a different rom for eg: PAC rom. it installs but it still shows cyanogenmod
AND MY WARRANTY WAS EXPIRED MONTHS AGO
i think there is a problem with the partition or something... i dont know how to fix it
SOMEONE PLZ HELP ME!
plz reply someone!! :'(
PLZ REPLY!!!
guys i need serious help. i have had this device (name in title) for a while and i had it rooted. when resetting it from its menu it got stuck on android is upgrading screen for a couple of days. so i decided to restore it using sp flash tool. i went on needrom and got the latest rom from there BIG MISTAKE . i then flashed it correctly and it had booted but it would not let me use the screen because it had froze. so then forcing it to power off by removing the battery. unfortunately it never booted up again. now when trying to flash the first rom available it only shows the red bar and then i get an error ''BROM:S_ft_enable_dram_failed(4032).
i have noticed that when it booted up after flashing the rom it booted up with a htc bootanimation so the rom was a custom rom.
the setup screen also looked messed up.
i was told to right click on the preloader when it shows up and install the correct drivers manually. i did but i also noticed it had a yellow triangle and was named mt65xxx preloader. once updating it it is now called something like mediateck vcom preloader or close to that but when connecting the phone it oonly stays there for 2 seconds and disappears and never comes back unless i dissconnect and connect the phone again.
someone please help and if you need more info just message me.