Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
khafaga said:
Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
Click to expand...
Click to collapse
hi please let me know if you got xoom fixed ?
I have similar issue after installing CM10.1 , tablet stucked on boot logo and because none of my volume buttons work I have no idea how to fix is ! ?
have this tablet for 3 years , it's a lot of stuff there
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
migimantas said:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
Click to expand...
Click to collapse
I have found that my emmc has the insane chip bug. The phone boots normally with cyanogen mode 11 but then it goes to sleep mode or I press the power button the screen goes black and the phone restarts. I have tried siyah kernel to try dual boot but then I flash siyah I cant get into recovery.
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
twinsen.net said:
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
Click to expand...
Click to collapse
I have already tried this but with the stock rom phone boots but at the section where I have to chose language I jus freezes stops working
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
twinsen.net said:
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
Click to expand...
Click to collapse
Take it straight away to the official service centre
Ok...so I'm using the SM-N900 . I installed pakeka rI'm v6 and decided to go for Dr. Khetan rom L23. I installed it and after a while I decidedo to go back to stock so I booted into philz recovery , did a full wipe, and went into power option and selected to reboot into download mode. After that it rebooted and my phones screen went completely blank and later these "gold dust" kinda appearance came on the screen. I waited a while still same and then I took out the battery, waited for about five minutes , inserted the battery and still that same appearance , no logo screen , no recovery , no download mode, just that blank "gold dust" screen. So this time around I just booted into download mode (blindly of course) and then I pressed volume up assuming it's already in download mode since screen is blank. Opened Odin and flashed stock firmware and it was a success. After that it took about almost 10 minutes before finally the device setup screen appeared ( whewwww!) ...Since funny since then again, phone''s back to normal...but my question is,
...how did this happen?
...Has anyone experienced that before?
...What could've caused that?
...what could have been the immediate remedy in this situation?
...could it be my device problem that I need to be aware of or its just a software problem?
Please help, I need answers..
Hello,
since 6 years I am always flashing my own Phones.
About 5 Months ago I flashed the S8 Noble Port to my Phone and it worked really well but Yesterday my
Phone turned off (The Phone was not in useas it happened, just in near) and then it tried to boot.
I thought my battery is down and tried charging it. Die Phone is starting to the first Galaxy S6 Logo and freezes.
I can turn it of with the 3 buttons but its always stucking there.
So I tried entering the TWRP -> No Chance
I flashed new TWRP via Odin -> Same Problem (No Recovery - Enter)
Finally I flashed the Stock-Rom -> Same Problem (Freeze and no way to enter Recovery)
I might think something inside my phone died yesterday
Someone know what kind of hardware problem this can be?
ExiizZ said:
Hello,
since 6 years I am always flashing my own Phones.
About 5 Months ago I flashed the S8 Noble Port to my Phone and it worked really well but Yesterday my
Phone turned off (The Phone was not in useas it happened, just in near) and then it tried to boot.
I thought my battery is down and tried charging it. Die Phone is starting to the first Galaxy S6 Logo and freezes.
I can turn it of with the 3 buttons but its always stucking there.
So I tried entering the TWRP -> No Chance
I flashed new TWRP via Odin -> Same Problem (No Recovery - Enter)
Finally I flashed the Stock-Rom -> Same Problem (Freeze and no way to enter Recovery)
I might think something inside my phone died yesterday
Someone know what kind of hardware problem this can be?
Click to expand...
Click to collapse
Frp lock on?
012512 said:
Frp lock on?
Click to expand...
Click to collapse
FRP lock is off
ExiizZ said:
Hello,
since 6 years I am always flashing my own Phones.
About 5 Months ago I flashed the S8 Noble Port to my Phone and it worked really well but Yesterday my
Phone turned off (The Phone was not in useas it happened, just in near) and then it tried to boot.
I thought my battery is down and tried charging it. Die Phone is starting to the first Galaxy S6 Logo and freezes.
I can turn it of with the 3 buttons but its always stucking there.
So I tried entering the TWRP -> No Chance
I flashed new TWRP via Odin -> Same Problem (No Recovery - Enter)
Finally I flashed the Stock-Rom -> Same Problem (Freeze and no way to enter Recovery)
I might think something inside my phone died yesterday
Someone know what kind of hardware problem this can be?
Click to expand...
Click to collapse
______________________________________
Tried Samsung Kies? Are you able to get into download mode?
Use Odin to flash the entire system again.
It will flash original recovery, kernel, rom and other stuff.
After that flash twap again.
Download the files from samobile.
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
try flashing the stock rom again using miflashtool.
2D1fferent said:
Hello,
It all happened like 2h ago when charging my phone (was at about 96%).
I just tried to open a Snap and my screen glitched, phone turned off itself after few seconds.
I could turn it on again only to see the same glitchy screen after one minute after turning on.
Now when I try to turn on my phone I can see the Poco logo and then a white screen with blue dots in a vertical
line going through the center of the screen.
I updated MIUI like a week ago, live in EU (MIUI was probably Global I'm not sure, I didn't change anything).
Bootloader is not unlocked, custom recovery is not installed.
USB Debugging is turned on.
Here is imgur with few photos of how it looks now:
https://imgur.com/a/lXsIm4t
Please help.. I've read that I need to give my phone to a service and they need to replace the motherboard.
I really don't want to lose my data.
I never read about that glitch in Poco phones before and I didn't back up my data.
I really need to get my photos of the phone (I really hope USB debugging helps here).
I also have Google Authenticator on this phone.. no idea if it's possible to get the keys back..
Maybe I could try tools from the index thread but I'm really scared I will make things worse, I need help with that.
Click to expand...
Click to collapse
I had this situation too 2 days ago after installing Magisk 24.3 , CusRom DF latest, Firmware 12.5.7. What i did was hit the power button for a sec immediately,and my device was back to normal untill now.
Antonio7489 said:
That's not actually a brick ,it's jus a screen bug/error in MIUI , I had this white screen but only when I installed MIUI after a custom room ,but it solved very easy by turning phone off/on , but what you have is different ,I suggest you to enter recovery by pressing power button+volume up and factory reset the phone ,but first try entering safe mode by rebooting the phone and when the Poco logo appears, press volume down until safe logo appears, if your phone boots in safe mode you can recover your stuff , if not try factory resting to get the phone back.
Click to expand...
Click to collapse
How is it now after awhile?
groovybanana21 said:
How is it now after awhile?
Click to expand...
Click to collapse
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Antonio7489 said:
I dont use MIUI anymore but i user it for 3 month after that bug and nothing happened ,no ghost touch ,just normal MIUI(with the garbage optimization ) .I dont know how it is with MIUI 13. You should expect anything from MIUI in this phone ,for 200$ that is sold globaly.
Click to expand...
Click to collapse
I see. I use this device since october last year, i never face any bug except that glitch screen even for a second,that gave me mini heart attack, lol..
So yes i flash stock MIUI13 again and stay on stock till now.
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Bumaye961 said:
Just happend to my phone everything is stock ... Rebooting gives the same white screen with blue vertical dots / also wiped the data but it still gives the same result
Click to expand...
Click to collapse
HELP
Bumaye961 said:
HELP
Click to expand...
Click to collapse
You should flash MIUI again with Mi Flash Tool , if it still happens you should flash a custom rom,if you get the same result go to a repair center.
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, safemode doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
I recommend to flash stock rom through fastboot mode.
Bambo. said:
just happend this today to me aswell, same problem with white screen and blue dots in the middle, i had it working for a bit like 3 times after restarting and restarting it for hours, it works for some time and randomly goes blank, fastboot doesn't work the problem persists in recovery mode too but it works for the most time, i've never had a custom rom everything is stock and im on miui 13.0.1, the phone does not respond to charging it when off and you have to hold the power button for a long time to turn it on
Click to expand...
Click to collapse
That's indicates your mainboard is broken. claim your warranty for mainboard replacement or new phone replacement(in some region)
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Bambo. said:
i got it working again after messing with plugging the charger in and out while powering it on, it booted and i reinstalled the latest update again from the settings and its been working for 6 hours now, no problem so far.
its a softbrick, in the message above i said that fastboot did not work and i was wrong, but you need to have the bootloader unlocked if you want to try the stock rom flash method
Click to expand...
Click to collapse
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Atul10 said:
Same has happened with my POCO X3 PRO. However, after few restarts the phone is now not re-starting after long press boot button. Help.
Click to expand...
Click to collapse
try charging it overnight and retry even if it does not respond to charging, i did that too when mine stopped powering on although it only charged around 41%
Antonio7489 said:
I don't think its a softbrick you should get it inspected at any Xiaomi Repair Center.
Click to expand...
Click to collapse
i know it might not be a softbrick but the charger case worked for me it might be a coincidence too because it is random most of the time it boots up randomly after restarting several times, when it does it can work for as little as some minutes or a couple of hours, to me it seemed like the rom got corrupted or something, im not an expert.
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
abdalla 22564 said:
my poco x3 pro wont turn on and after the poco logo it gives white screen with blue vertical dots and miflashtool wont work because i didnt download the file on my phone beforehand and my warranty is over what should i do
Click to expand...
Click to collapse
No real answer till now ðŸ«