Database Info

[Q] Problems with most Roms

I am unlocked and have the recovery of twrp 2.3.3.0. I'm having problems with about every single rom I flash. I wipe everything as you are suppose to and the flash appears to go well but usually right away after the rom boots up the system becomes unresponsive. I have to hold my finger over a button for a couple seconds for it to acknowledge a touch and things just don"t run right.
Its like either the system is almost locked up or the touchscreen just hardly works.... one of the two. I made a backup of my original asus setup and if I restore it the tablet works just fine. I've tried hydro, cm 10.1, blackbean 7, and one or two I'm forgetting. AOKP RC1 is the only custom rom that gives me no problems at all in this regard, unfortunately its an unfinished rom, no camera and my battery dies like crazy with it...
The 2nd best running rom that I really like from what I have seen is blackbean 7. Runs great for first few minutes but after playing a game for a bit or doing some other things and having it run just great all the sudden the dreaded problem occurs and the only fix is a reboot for it to work for a while longer. So frustrated at this point as I have flashed so many roms and resetup so many things just to find myself doing it again trying to fix this and find a rom that works for me.
Any ideas at all on what could do this? Is the difference in the kernels the reason why AOKP RC1 and Asus original work but none of the others? Or does it have to do with my recovery? Fairly certain I have the correct most recommended one with twrp 2.3.3.0 and the process went fine. Any ideas greatly appreciated. I really just want to be able to run blackbean. And knowing that most all roms will not work for me is rather disturbing in regards to the future. Really wanting to like my new tf300t but its making it hard:silly:

Try to downgrade your recovery.
Use this : openrecovery-twrp-2.3.1.0-tf300t-JB.blob
and take a feedback after, thanks

I really appreciate that you took the time to give me something to try but I'm afraid it didn't work. Process went fine I'm on 2.3.1.0 twrp but same problem. First rom I've tried instant non-responsive. Any other ideas?

I've been using ClockWorkMod Recovery on my TF300T, and it's been great. (Used it to upgrade my ROM to CM 10.1.) No issues at all.
If you need instructions for getting it installed on a TF300T, check out my second-to-last post on thoughtsontechnology.com. (NONE of the work is mine, I just compiled the instructions and links in one spot for easier access. Most of the work came from XDA contributors, they've been really great.)

Most roms need 5 to 10 mins to stabilize after a new install, usually as they are building media storage files, etc. Are you giving them enough time?
Failing that I can only think your microsd has something corrupt on it. Boot with it out.

Well I tried cwm again flashed it no problem installed rom no problem but no fix. So guess we have established it definitely isn't the recovery at this point...
Yes I've given roms several reboots and lots of suffering them working for 10min to only fail again for another reboot... So its not that. Still the only Rom that will work is my backup of the original asus and the AOKP RC1. Trying it without the external sdcard right now.
Well no joy on the removal of the external sdcard

Have you tried a full wipe before installing? You must have some thing on the data partition causing this. I

sbdags said:
Have you tried a full wipe before installing? You must have some thing on the data partition causing this. I
Click to expand...
Click to collapse
Not sure what a full wipe is? I wipe cache/dalvik system format data and have even tried formatting the sdcard once several roms ago. One thing I have noticed since I am trying so many roms all the time is the sdcard file structure seems odd as I have at the root of the sdcard a 0 directory that continues to be added to. Currently it goes sdcard/0/0/0/0 to actually get to where I have things stored like music, downloads. Is this normal? Its strangely repetitive.

Personally I think you should stop using TWRP if you're having all these issues. Just flash CWM and have fun

touchscreen
This thread is a couple months old, but i am having the same problem. After installing a lot of different roms, both stock based and cm/AOKP. I let the rom stabilize and after a few hours or even minutes the touch screen has a mind of its own. It lags, double touches or fails to respond at all. I m on twrp 2.4.1.0. Was this issue ever resolved? Should I try old version recovery or cwm? I restored rooted stock us10.4.2.20 and the issue is gone. Is it possible that installing a rom changed the touch screen firmware? I am open to suggestions as I have spent alot of time on this with no luck. Thanks!
What version CWM would u suggest as this is probably my next move?

Showme1 said:
This thread is a couple months old, but i am having the same problem. After installing a lot of different roms, both stock based and cm/AOKP. I let the rom stabilize and after a few hours or even minutes the touch screen has a mind of its own. It lags, double touches or fails to respond at all. I m on twrp 2.4.1.0. Was this issue ever resolved? Should I try old version recovery or cwm? I restored rooted stock us10.4.2.20 and the issue is gone. Is it possible that installing a rom changed the touch screen firmware? I am open to suggestions as I have spent alot of time on this with no luck. Thanks!
What version CWM would u suggest as this is probably my next move?
Click to expand...
Click to collapse
Sounds like you have a hardware fault if the issue persists across multiple firmwares.

Also, OP said his SD card directory structure was strange. I'd format both internal and external SD in recovery (in addition to wiping and factory reset) before you flash.

Thanks! Wiping internal has seemed to do the job. Still would like to know what the issue was. I was thinking it was the touch panel firmware, but thought that would be in /system
Sent from my SGH-I747 using xda app-developers app

[Resolved] [Q]AOKP boot loops after premature battery pull

I've had AOKP (can't remember which version..) installed for a while now and it's been acting funny, boot looping from time to time, but a simple battery pull fixed it each time.
Today I was turning off the phone to switch out the battery, and pulled out the battery before it had finished shutting down the "proper" way. Now when I turn it on, it gets stuck at "Initiating Swagger" with the pink unicorn. I've tried wiping the dalvik cache and formatting /cache.
I'd like to preserve some of the photos and texts, as well as all my apps which I, completely stupidly, didn't back up with Titanium Backup even though I've been meaning to for a little while now. I'm ready to reset and install a new rom if I have to, but I was wondering if there was a simple fix I'm overlooking since all I did was pull the battery out too early, rather than having done anything substantial like installing a new rom. Really appreciate any help, I've been phoneless all day and would love to not go through the motions of a whole new rom.
I JUST DON'T UNDERSTAND

Amb1valence said:
I've had AOKP (can't remember which version..) installed for a while now and it's been acting funny, boot looping from time to time, but a simple battery pull fixed it each time.
Today I was turning off the phone to switch out the battery, and pulled out the battery before it had finished shutting down the "proper" way. Now when I turn it on, it gets stuck at "Initiating Swagger" with the pink unicorn. I've tried wiping the dalvik cache and formatting /cache.
I'd like to preserve some of the photos and texts, as well as all my apps which I, completely stupidly, didn't back up with Titanium Backup even though I've been meaning to for a little while now. I'm ready to reset and install a new rom if I have to, but I was wondering if there was a simple fix I'm overlooking since all I did was pull the battery out too early, rather than having done anything substantial like installing a new rom. Really appreciate any help, I've been phoneless all day and would love to not go through the motions of a whole new rom.
I JUST DON'T UNDERSTAND
Click to expand...
Click to collapse
Looks like pulling the battery while it was shutting down corrupted some essential scripts on your device. So you have to flash a Rom to fix this. Dont worry coz there is something i do which can help you if you want to keep your apps n all. What you have to do is take a clockwork mod recovery backup right now. Then wipe everything including data,cache and dalvik cache. Now flash your Rom. If you want your apps n all then flash the same Rom you had. Now after it is flashed and working, boot to cwm recovery. select backup and restore then go for advanced restore. Select the backup you took. And restore data alone. This should make your phone look like it had never been flashed again with the Rom. Just like you had it before. And if even now the bootloop continues, do the same but first flash the kernel then Rom then do what i asked you to do. Hopes this helps...

Thanks man, that's a great idea, I didn't even think of that. Unfortunately I tried it, without and then with the kernel and it still didn't work.
What I ended up doing (for any of our posterior who happen upon this post) is installed the newest version of AOKP (which I actually didn't have previously), and downloaded an app called nandroid manager, which pulls apps/data, SMS messages, call logs, everything from any nandroid backup. I'm restoring all my stuff right now. Thank god.
Interestingly enough, even after I wiped everything multiple times, when I connected my phone to the computer it had all my photos & other data still on the internal storage. Weird as hell. But whatever.

Amb1valence said:
Thanks man, that's a great idea, I didn't even think of that. Unfortunately I tried it, without and then with the kernel and it still didn't work.
What I ended up doing (for any of our posterior who happen upon this post) is installed the newest version of AOKP (which I actually didn't have previously), and downloaded an app called nandroid manager, which pulls apps/data, SMS messages, call logs, everything from any nandroid backup. I'm restoring all my stuff right now. Thank god.
Interestingly enough, even after I wiped everything multiple times, when I connected my phone to the computer it had all my photos & other data still on the internal storage. Weird as hell. But whatever.
Click to expand...
Click to collapse
Thats pretty interesting.. I never tried AOKP so dunno much bout the way it works. Anyway happy for you man..

Amb1valence said:
Thanks man, that's a great idea, I didn't even think of that. Unfortunately I tried it, without and then with the kernel and it still didn't work.
What I ended up doing (for any of our posterior who happen upon this post) is installed the newest version of AOKP (which I actually didn't have previously), and downloaded an app called nandroid manager, which pulls apps/data, SMS messages, call logs, everything from any nandroid backup. I'm restoring all my stuff right now. Thank god.
Interestingly enough, even after I wiped everything multiple times, when I connected my phone to the computer it had all my photos & other data still on the internal storage. Weird as hell. But whatever.
Click to expand...
Click to collapse
That's because a wipe does not affect sd card or internal storage

brandonarev said:
That's because a wipe does not affect sd card or internal storage
Click to expand...
Click to collapse
Well.. It do affect internal memory on low phones. I am not sure bout devices having large internal storage but wiping data usually removes everything on my internal.

[Q] XT926 Stuck on 11/07 CM 11

I have an XT926 running KKBL CM11 nightlies and have been updating through Cyandelta since Towelroot gave me an unlocked bootloader (thanks Geo). I have been updating without issue until the 11/07 nightly. Ever since then, Cyandelta shows no updates but if I go through the CM Updater, it shows all of the updates released for the moto_msm8960. If I try to apply any of these updates outside of Cyandelta (either through CM Updater or flashing full zip through recovery), I can boot my phone but will start getting a persistent error saying "There's a problem with com.android.phone process and it has to close" or something to that effect. I have tried wiping both caches and even doing factory resets but the process crashing starts back within a few minutes of getting everything set up. I did notice that even though I did a factory reset, all of the apps I have installed still had data from before the wipe so I feel like the wipe is missing something that is causing the crash(?). I've been using custom ROMs for a while on a few different devices but this is the first time I've ran across this. Any advice?

Nuke and pave.
Something is stuck and vaguely familiar to me but at this point, if it were me, that's what I would do. Just time consuming.

CWGSM3VO said:
Nuke and pave.
Something is stuck and vaguely familiar to me but at this point, if it were me, that's what I would do. Just time consuming.
Click to expand...
Click to collapse
I've never had to go further than a factory reset before. Which partitions should I format?

I'd format system, data, cache and dalvik. Definitely time to flash clean.
When I had my XT926, I also found that after so many updates via Cyandelta, that I would get the same issue. I would then go back, clean flash the latest update and things would be good. I eventually stopped using Cyandelta altogether. It's a nice idea, but I just don't know if I completely trust its abilities in determining what to bring down and what not to. I'd rather go with the CM updater instead. Yeah, it means longer downloads, but which is longer: downloading the full update from CM and having it work, or downloading via Cyandelta and then having to wipe clean, install and then restore all your backups?

iBolski said:
When I had my XT926,
Click to expand...
Click to collapse
You did abandon ship!

lloydsw said:
You did abandon ship!
Click to expand...
Click to collapse
Yup, but I stated in my post (where I said my goodbyes), that I would still hang around and help out. I know there are a lot of people still on this phone, especially with CM12 now running on it.
But, loving my G3. Still on stock, though (4.4.2), but I have no reason to go to anything else right now. Runs smooth, but it is rooted so I can run TiBu and also enable SD writing. But, I have no other reason to go to CM12 at this time.
I can get at LEAST one day if not more. Usually, after 24 hours, I'm right around 50% on battery. I probably could go even longer, but definitely I get more battery life out this phone than I did on the XT926 (non-MAXX), but I was able to do the same on my non-MAXX, but only if I didn't use it much. With the G3, I can do quite a lot and make it through the day without having to recharge during the day. I love that!
In any case, I'm still lurking about these forums to see if anyone needs help.

Help, out of ideas. Possible mother/logic board going bad?

I have a well and heavily used Galaxy S5 (GM-900P) and about 2 months ago it started accting up pretty hard. Becoming very very slow so I decided to update to the latest sprint firmware and install a new(er) rom ([ROM][QD1][6.0.1]14Dec2017] Stock-ish Plus Tidbits and Magisk) and all was good for about 5 days and the phone started having apps crash/force close like crazy and most the time just reinstalling them would fix it but a bunch of google play services would crash and would have to uninstall the updates then it would work again for a day or so, sometimes it would randomly restart and get stuck at the boot screen and the phone would get crazy hot and the only way out of it was to boot into the recovery and then reflash the stock firmware in odin again then reinstall the rom. Then I had my phone all of a sudden act like there was no sim card in it and originally though it was a sim card issue but turns out it wasnt, I had to boot into the recovery and do a full wipe of everything reflash the stock firmware yet again and then reinstall the rom again. That happened twice in a matter of a week. At my wits end I decided to give LineageOS v16 a try so I boot into recovery, do a full wipe, boot into download mode, flash the latest stock firmware in odin, then boot right to recovery, flash LineageOS 16.0 then latest Magisk and all was great, for about a week, then Google services start crashing again and random apps crash over and over and even times the phone would slow down and reboot, get stuck at the boot screen and then eventually just reboot back into recovery by itself after failing to boot. But with LineageOS at least just reflashing the rom in the recovery will let it boot right back up sometimes and work as it should for another few days, other times too much stuff will just keep crashing so I do a full wipe and reflash LineageOS and all will be great for another few days to a week and it starts all over again. Its like stuff just randomly gets corrupted on the device and the only way out of it is to reflash the whole thing and start over and enjoy it until it does it again. Sometimes it will go days, sometimes a day later its all screwy again.
Also, TWRP always fails when I try to do a back up and it seems to always fail when in the data or data/private-app part of the system and its never at the same point.
I guess my question here is, could the onboard flash (the motherboard/logic board) be taking a crap on me? I really really dont want to give up on this phone just yet as it has everything I want in a phone and frankly, I just really really like it. I can get a new (used) motherboard for like $20 but even that kind of worries me cause I dont want to possibly be in this same position 3 months later again. I have a Galaxy S8+ (unlocked AT&T phone) that I refuse to use yet just cause I can not root it or unlock the bootloader.
Any help or ideas would be much appreciated and sorry for the long winded post.

could be wrong, on this one, But.....
If it was mew, I would go to stock . run that for a day, maybe 3... if all it well, then flash over what ever Rom you would like.
"KNOWING IT Work" is the key. Oh, another thing, that may help too . seen this on one of the LineageOS 15.1 or 16 is when you wipe ... System and Data, can be Reformatted, they have had some major success by also formatting it, (YES EXT4) but this will help to ensure nothing left over....
May even help with others Android 8.0, 8.1, 9.0....

Well, I have a new motherboard on the way so we'll see how that goes but I did manage to get the stock firmware on there and booted then I reflashed TWRP and then Magisk and going to just run it that way for a bit and see what happens.
I initially went in to TWRP, wiped data,system, etc... then flashed the stock firmware in Odin, then rebooted, got stuck at the Samsung boot logo so pulled the battery, booted to stock recovery, did a factory reset (Wiped everything, internal sd card included), then got it to boot, set the phone up, then rebooted to download mode, flashed TWRP, then rebooted again, set the phone up a bit more then decided to flash Magisk so I have root, and so far its working. 100% stock with magisk. Fingers crossed.
I still think there is an issue with the internal flash memory though as I can not get a TWRP backup to actually complete without failing. It always fails when backing up stuff in the data partition/section and never at the same point like its having read errors or something. I'll grab a TWRP log and post it up in a bit.

Well, that didnt last long. Within an hour, apps started crashing. I will make this thing work! LoL

Bricked my OP7P - Can't decrypt data partition anymore

Hey Guys,
this could propably be posted in r/TIFU as well since I think I screwed up big time today -.-
I basically just wanted to update my rooted OP7P to 10.0.5 (EU) using the latest OTA - so I followed the usual steps as always:
Uninstall Magisk
Install OTA - No Reboot
Install TWRP retention script in Magisk
Re-Install Magisk
Reboot
This procedure worked fine the last 2 times an OTA was released but this time I'm not able to boot into the system anymore. TWRP is still in places but won't read the data partition anymore - it also doesn't ask for my pattern to decrypt it. Problem is that idiot-me of course didn't do a backup before (yea, I know -.-) and obviously doesn't want to loose the data on it.
I of course checked the forum and googled my ass of trying to find a non-destructive way to access the system but couldn't find anything fitting my scenario. So my last resort is to ask you guys directly: Did anybody ever encounter such a situation and if yes, how did you resolve it? Right now any support would be much appreciated
//Edit: Symptoms and current behaviour:
Boot into system (partition A) ends in the OP logo cirling endlessly
Boot into system (partition B) sends me directly to TWRP
TWRP doesn't ask for encryption pattern
The answer to TWRP's initial question (Keep System r/o) is not persisted
Fastboot/ADB are working (but obviously w/o access to /data)
I'm technically running a stock OxygenOS with Renovate ICE. I know technically its instuctions say to install the OTA directly from within TWRP and and then re-flash TWRP and Magisk but that wasn't neccessary the last times... one idea of mine is to just do that now and see where it leads me but I really don't wanna risk my data.

the.cybertronic said:
Hey Guys,
this could propably be posted in r/TIFU as well since I think I screwed up big time today -.-
I basically just wanted to update my rooted OP7P to 10.0.5 (EU) using the latest OTA - so I followed the usual steps as always:
Uninstall Magisk
Install OTA - No Reboot
Install TWRP retention script in Magisk
Re-Install Magisk
Reboot
This procedure worked fine the last 2 times an OTA was released but this time I'm not able to boot into the system anymore. TWRP is still in places but won't read the data partition anymore - it also doesn't ask for my pattern to decrypt it. Problem is that idiot-me of course didn't do a backup before (yea, I know -.-) and obviously doesn't want to loose the data on it.
I of course checked the forum and googled my ass of trying to find a non-destructive way to access the system but couldn't find anything fitting my scenario. So my last resort is to ask you guys directly: Did anybody ever encounter such a situation and if yes, how did you resolve it? Right now any support would be much appreciated
//Edit: Symptoms and current behaviour:
Boot into system (partition A) ends in the OP logo cirling endlessly
Boot into system (partition B) sends me directly to TWRP
TWRP doesn't ask for encryption pattern
The answer to TWRP's initial question (Keep System r/o) is not persisted
Fastboot/ADB are working (but obviously w/o access to /data)
I'm technically running a stock OxygenOS with Renovate ICE. I know technically its instuctions say to install the OTA directly from within TWRP and and then re-flash TWRP and Magisk but that wasn't neccessary the last times... one idea of mine is to just do that now and see where it leads me but I really don't wanna risk my data.
Click to expand...
Click to collapse
The bad news is once twrp loses access to data. The only fix is to format data and everything will be fixed.

So... you're basically telling me I ****ed up completely and my data is gone? Never was a profile picture more fitting than yours right now :/
What I'm wondering is that, from a technical perspective and on a working phone, the decryption takes place not during the boot but only after you've entered your code/passphrase/pattern on OS level. Meaning the system should theoretically be able to boot up to there without /data access. TThat's why I had the idea to flash a clean stock Oxygen from TWRP (no root), boot the system and hopefully be able to access the data this way. Respectively any encryption can be broken somehow, can't it? Even if it might take quite some time to do so this should theoretically be possible...
I mean... I definetly don't know enough about Android internals to understand its encryption mechanics completely but from a technical perspective it should be possible.... like the saying "there is no such thing as 100% security"

the.cybertronic said:
So... you're basically telling me I ****ed up completely and my data is gone? Never was a profile picture more fitting than yours right now :/
What I'm wondering is that, from a technical perspective and on a working phone, the decryption takes place not during the boot but only after you've entered your code/passphrase/pattern on OS level. Meaning the system should theoretically be able to boot up to there without /data access. TThat's why I had the idea to flash a clean stock Oxygen from TWRP (no root), boot the system and hopefully be able to access the data this way. Respectively any encryption can be broken somehow, can't it? Even if it might take quite some time to do so this should theoretically be possible...
I mean... I definetly don't know enough about Android internals to understand its encryption mechanics completely but from a technical perspective it should be possible.... like the saying "there is no such thing as 100% security"
Click to expand...
Click to collapse
Dude try flashing the stock rom from twrp onto both slots by mounting an otg drive..or adb sideload(very slow I think..still worth a try if you don't wanna lose data)..stock rom can manage the encryption I suppose.
Encryption is an issue when you flash different roms(I think so..I am no expert,just my experience so far).
Breaking encryption is not like what you think..it might take ages to break using brute force (again from what I heard..I lost my data a lot of time flashing roms without twrp backup..nowadays I just backup my apps using tb coz restorings the apps is really a pain in the ass process)

the.cybertronic said:
So... you're basically telling me I ****ed up completely and my data is gone? Never was a profile picture more fitting than yours right now :/
What I'm wondering is that, from a technical perspective and on a working phone, the decryption takes place not during the boot but only after you've entered your code/passphrase/pattern on OS level. Meaning the system should theoretically be able to boot up to there without /data access. TThat's why I had the idea to flash a clean stock Oxygen from TWRP (no root), boot the system and hopefully be able to access the data this way. Respectively any encryption can be broken somehow, can't it? Even if it might take quite some time to do so this should theoretically be possible...
I mean... I definetly don't know enough about Android internals to understand its encryption mechanics completely but from a technical perspective it should be possible.... like the saying "there is no such thing as 100% security"
Click to expand...
Click to collapse
The reason that format is the only answer is because when twrp does not ask for password. It believes you are unencrypted. What has happened is the file that store your password and encryption key is corrupted so any answer you give is wrong.

There's nothing you can do but format data. I've encountered this issue already.

You can try to salvage personal photos and videos using an otg drive (external ssd, hdd, sd card reader...), also back in 6t days I had this encryption problem twice, I remember that one time flashing the stock rom from the otg fixed it but I don't remember if I rebooted to recovery of the other slot.
Anyway, for the others, if he used DM verity removal and so decrypted data, he would have never face this problem again?

Joker123## said:
Dude try flashing the stock rom from twrp onto both slots by mounting an otg drive..or adb sideload(very slow I think..still worth a try if you don't wanna lose data)..stock rom can manage the encryption I suppose.
Encryption is an issue when you flash different roms(I think so..I am no expert,just my experience so far).
Breaking encryption is not like what you think..it might take ages to break using brute force (again from what I heard..I lost my data a lot of time flashing roms without twrp backup..nowadays I just backup my apps using tb coz restorings the apps is really a pain in the ass process)
Click to expand...
Click to collapse
vegetaleb said:
You can try to salvage personal photos and videos using an otg drive (external ssd, hdd, sd card reader...), also back in 6t days I had this encryption problem twice, I remember that one time flashing the stock rom from the otg fixed it but I don't remember if I rebooted to recovery of the other slot.
Anyway, for the others, if he used DM verity removal and so decrypted data, he would have never face this problem again?
Click to expand...
Click to collapse
I just tried flashing the stock Oxygen yesterday but to no satisfying result... afterwards it just showed a clean default-structure on the SD. Long story short: I accepted the fate that my data is gone and learned a valuable lesson... first thing I installed after rooting was Titanium^^
Zhuang zhuang said:
There's nothing you can do but format data. I've encountered this issue already.
Click to expand...
Click to collapse
As hard as it is to admit, you were completely right... I just lost 6 months worth of photos incl. my last vacation in Vietnam - fml.

the.cybertronic said:
I just tried flashing the stock Oxygen yesterday but to no satisfying result... afterwards it just showed a clean default-structure on the SD. Long story short: I accepted the fate that my data is gone and learned a valuable lesson... first thing I installed after rooting was Titanium^^
As hard as it is to admit, you were completely right... I just lost 6 months worth of photos incl. my last vacation in Vietnam - fml.
Click to expand...
Click to collapse
For future reference, brick means a brick. Like, can't boot to fastboot/twrp/or use msmtool

the.cybertronic said:
As hard as it is to admit, you were completely right... I just lost 6 months worth of photos incl. my last vacation in Vietnam - fml.
Click to expand...
Click to collapse
In the recent OS (10.0.5 & beta 13) I think Oneplus they add something that prevent user from using the TWRP retention script. I always use this solution for lower version and have no issue but with both 10.0.5 and beta 13 have the same issue

Zhuang zhuang said:
In the recent OS (10.0.5 & beta 13) I think Oneplus they add something that prevent user from using the TWRP retention script. I always use this solution for lower version and have no issue but with both 10.0.5 and beta 13 have the same issue
Click to expand...
Click to collapse
damn, good to know if I ever install OOS again - I now switched to Havoc... even though I had to skip rooting it all together after I couldn't get Magisk running with the latest safety net changes (thanks Google -.-)