Hi together,
my touchscreen&display are broken. Now i wanted to clone my screen to my laptop by ApowerMirror. The app can install the Phone-Client via ADB. USB-Debugging was enabled on my Mate 7, but my Laptop isnt Authorized.
HiSuite also tells me, that i have to press the authorize-button on the phone.
CWM Recovery is already installed, but i dont want to boot in the recovery, because there is no way back in the ROM until i have no screen and Touch(PhoneLock)
I wanted to try to press the button with a connected mouse, but when i unplug my Notebook the AuthorizePopUp will disappear.
BTW: I also tried to connect the Mate7 with a MHL-Cable with the TV...No funktion. Do your Phones support MHL?
just connect an otg mouse and keyboard... you know, get root by cwm, then use wifi control it instead of adb
Related
I wanted to use nvflash to bring back to clean slate. Could not get the USB driver issue resolved in Windos 7 or XP, Read the threads, just did not work. Also noticed that the USB connect to the GTablet stopped working, it woriked fine for before trying adp. Tried Linux and the device is not seen using LSUSB did see the device is I tried via USB debugging mode. I power on and hold the vol- button see boot screen then unit goes black. No usb connect to PC either after trying.
Reset the device to stock with CWM and PC USB comes back. Is there a utility or something to check the ADP functionality at boot level, has anyone had USB issues that can help? Is it a possible hardware issue?
mrmpo said:
I wanted to use nvflash to bring back to clean slate. Could not get the USB driver issue resolved in Windos 7 or XP, Read the threads, just did not work. Also noticed that the USB connect to the GTablet stopped working, it woriked fine for before trying adp. Tried Linux and the device is not seen using LSUSB did see the device is I tried via USB debugging mode. I power on and hold the vol- button see boot screen then unit goes black. No usb connect to PC either after trying.
Reset the device to stock with CWM and PC USB comes back. Is there a utility or something to check the ADP functionality at boot level, has anyone had USB issues that can help? Is it a possible hardware issue?
Click to expand...
Click to collapse
Try USBDeview: http://www.nirsoft.net/utils/usb_devices_view.html
Disconnect the G Tablet from your PC. Then run USBDeview as administrator (i.e. right click and Run as Administrator in Windows 7). Then uninstall any drivers related to the G Tablet.
Now plug in G Tablet and it should be detected again and you can point it at a properly working ADB driver on your PC.
Have done that, but it seems that it is something on the GTablet that is causing the error. When is is malfunctioning no USB connections work and driver issues pop up, after set to factory the USB works and driver issue for storage go away.
So far I can tell that adp mode from power and vol - unroots my tab and I can not connect to pc. After re-rooting I can connect. Linux can not see device in adp mode.
Update. Returned the unit to sears for a new one and problem solved. I must of had a clinker.
Hi,
Have a TF101 tablet here stock rom, stock recovery...
However it seems the USB will not detect on a windows PC tried multiple cables multiple PC's tried from recovery nothing is detected in device manager at all. Tablet doesn't even detect that its connected to PC either.
Is there anyway to root this thing without USB??? I need to root it so I can install recovery and flash another rom.
Thanks,
Which Windows version are you running?
If you use Win 7 and prior you should be able to connect with the universal naked drivers manually installed from device manager
Win 8 and above need driver signing disabled or they wont install the driver and the PC wont see the TF
If you have already tried the above, you might need a new cable
http://forum.xda-developers.com/showthread.php?t=1688012
*Detection* said:
Which Windows version are you running?
If you use Win 7 and prior you should be able to connect with the universal naked drivers manually installed from device manager
Win 8 and above need driver signing disabled or they wont install the driver and the PC wont see the TF
If you have already tried the above, you might need a new cable
http://forum.xda-developers.com/showthread.php?t=1688012
Click to expand...
Click to collapse
Thanks. Well i tried windows 7 x64 and windows 8 x64, neither showed any device or unknown device in device manager... Tried multiple cables as wel, no dice...
Shouldn't MTP work regardless of drivers installed in windows 7/8 ?
Are you putting the TF into APX mode?
Connect TF to PC USB > Power Off TF > Hold Power & Volume Up until the PC recognises it (Only takes a couple seconds, nothing appears on the TF screen) then install drivers
You need APX mode for Easyflasher
For normal media transfer, it will still need to install at least some USB type driver, as do all USB devices to function, possibly not the APX drivers
Check in Developer Options > USB Debugging mode
Try it enabled and disabled with the TF plugged in
But really the MTP drivers are not what you need if you want to root. you need APX mode to work (As above)
*Detection* said:
Are you putting the TF into APX mode?
Connect TF to PC USB > Power Off TF > Hold Power & Volume Up until the PC recognises it (Only takes a couple seconds, nothing appears on the TF screen) then install drivers
You need APX mode for Easyflasher
For normal media transfer, it will still need to install at least some USB type driver, as do all USB devices to function, possibly not the APX drivers
Check in Developer Options > USB Debugging mode
Try it enabled and disabled with the TF plugged in
But really the MTP drivers are not what you need if you want to root. you need APX mode to work (As above)
Click to expand...
Click to collapse
Doesn't seem to do anything when I hold power vol+, the screen of the tablet (blank/off) and on the pc nothing is being detected.
I can get to the bootloader/recovery via holding power vol- though. Also tried USB debugging mode... nothing is detected whatsoever... ordering another cable on ebay will see if that works but I doubt it since it seems to be a common issue with this tablet (port not working with pc)
I edited my post
Nothing will appear on the TF screen in APX mode until data transfer begins
The cheap non genuine cables are renowned for data connection failing, genuine cables are recommended
I still have my original cable and it still works 100%
*Detection* said:
I edited my post
Nothing will appear on the TF screen in APX mode until data transfer begins
The cheap non genuine cables are renowned for data connection failing, genuine cables are recommended
I still have my original cable and it still works 100%
Click to expand...
Click to collapse
Using the original cable, I still can't tell if its in APX mode, installed all the drivers provided by asus, nothing is detected in windows device manager. I'm 100% its not being detected ie. no connection. I ran easyflasher anyway both sbk1 and sbk2 says it flashed recovery but it never did still the stock recovery is on the tablet.
Will try again once the new cable comes in, thanks.
Forget the ASUS drivers, use the Universal ones from the Easyflasher thread
Here's what will happen when its working as intended
When you plug the TF into the PC, no matter what mode it is in, the PC should sound the USB connect sound
When you power off the TF, then put it in APX mode, the PC will again sound the USB connect noise, then it will fail to install the correct drivers
That's when you open Device Manager, find the ! missing driver ! exclamation mark, and update drivers manually pointing it to the extracted Universal drivers
Once you have installed them, then Easyflasher should work as normal
So unless you actually have a hardware fault on the TF, or the USB ports of the PC, Id hedge my bets on the cable
Have you tried a different PC?
*Detection* said:
Forget the ASUS drivers, use the Universal ones from the Easyflasher thread
Here's what will happen when its working as intended
When you plug the TF into the PC, no matter what mode it is in, the PC should sound the USB connect sound
When you power off the TF, then put it in APX mode, the PC will again sound the USB connect noise, then it will fail to install the correct drivers
That's when you open Device Manager, find the ! missing driver ! exclamation mark, and update drivers manually pointing it to the extracted Universal drivers
Once you have installed them, then Easyflasher should work as normal
So unless you actually have a hardware fault on the TF, or the USB ports of the PC, Id hedge my bets on the cable
Have you tried a different PC?
Click to expand...
Click to collapse
Ok, well ya thats the thing no sound or detection of anything when plugging it in, or going into apx mode, rebooting etc...
I tried 2 cables and 2 different PCs. Will try a new cable but I betting that is won't work either... we'll see.
Thanks again
No need to bother with cables and drivers, just download Baidu Root: https://app.box.com/s/pyehf9fh4xem3hy50dot
EDIT: The app has built-in su access management, but I'd recommend installing SuperSU from the Play Store.
Duchman said:
No need to bother with cables and drivers, just download Baidu Root: https://app.box.com/s/pyehf9fh4xem3hy50dot
EDIT: The app has built-in su access management, but I'd recommend installing SuperSU from the Play Store.
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!! Worked to let me get TWRP installed and flashed a new rom with SU etc...
Thanks again!!!!!!!!!
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
TerrorToetje said:
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
Click to expand...
Click to collapse
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
d3nni said:
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
Click to expand...
Click to collapse
I ordered a new USB port board, will let you know the results!
Any results after changing the usb port?
Did fast charge still work for you? And this replacing the USB port work? I think this is related to a broken USB ic. For me replacing the USB port didn't help
Sometimes it's a bad charging port and / or liquid damage to the charging port.
If your home button clicks but does not work it could be liquid damage near the home button. Same goes for power and volume buttons.
I just fixed a S6 edge plus yesterday power button not working, liquid damage all around power button area, fixed burnt components and corroded pins.
I am able to connect my phone (lenovo vibe c2 k10a40) to my computer and use ADB, then type in fastboot oem unlock. However, when I try to use my Volume Up button in order to select to unlock the bootloader, it wont work. Only the Volume Down button is working, which cancels the command. I am doing this in order to get a custom recovery and in turn get CyanogenMod working. I've been working on this all day and have found no solution. I would appreciate any help.
I'm sorry for my English, I'm brazilian
tafds163 said:
I am able to connect my phone (lenovo vibe c2 k10a40) to my computer and use ADB, then type in fastboot oem unlock. However, when I try to use my Volume Up button in order to select to unlock the bootloader, it wont work. Only the Volume Down button is working, which cancels the command. I am doing this in order to get a custom recovery and in turn get CyanogenMod working. I've been working on this all day and have found no solution. I would appreciate any help.
I'm sorry for my English, I'm brazilian
Click to expand...
Click to collapse
Try connecting a USB mouse to your device, you will need an adapter or an OTG cable to use it, you can use the mouse to make your selections instead of the volume buttons..
If you need to be connected to more than thing, you can connect a USB hub to your phone then connect to the things you need.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Try connecting a USB mouse to your device, you will need an adapter or an OTG cable to use it, you can use the mouse to make your selections instead of the volume buttons..
If you need to be connected to more than thing, you can connect a USB hub to your phone then connect to the things you need.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Otg not work in fastboot
Any news about how to "press VolumeUP" in fastboot ?
Hi guys,
I dropped my OPO and now digitizer is not working.
I want to connect my phone to computer and use it (turn off alarm clock, read some messages). Unfortunately I don't have otg cable.
My phone is rooted, but usb debugging is off, so my computer doesn't see my OPO.
I tried with my recovery (TWRP 3.1.1-K2), but adb says it's unauthorized device and because of broken digitizer I can't turn on adb sideload in recovery.
Do you know of any way to turn it on?
nienic said:
Hi guys,
I dropped my OPO and now digitizer is not working.
I want to connect my phone to computer and use it (turn off alarm clock, read some messages). Unfortunately I don't have otg cable.
My phone is rooted, but usb debugging is off, so my computer doesn't see my OPO.
I tried with my recovery (TWRP 3.1.1-K2), but adb says it's unauthorized device and because of broken digitizer I can't turn on adb sideload in recovery.
Do you know of any way to turn it on?
Click to expand...
Click to collapse
Use a mouse with otg cable.Buying an otg cable doesn't take much(<1$).
Mr.Ak said:
Use a mouse with otg cable.Buying an otg cable doesn't take much(<1$).
Click to expand...
Click to collapse
That is one of the most simply elegant solutions I've seen posted anywhere.