Related
Ok. So I managed to update my phone to 5.1. But now I've lost rooting rights. I found one thread already here saying to use KingRoot, but that did not work for me.
Can anyone give me a step-by-step way to root my Mate 7 with lollipop 5.1?
P's: the main problem being that I do not have an unlock code. When trying to get one from huawei I get a hw_account_member_error... If anyone has a solution to fix that...
dekraan said:
Ok. So I managed to update my phone to 5.1. But now I've lost rooting rights. I found one thread already here saying to use KingRoot, but that did not work for me.
Can anyone give me a step-by-step way to root my Mate 7 with lollipop 5.1?
P's: the main problem being that I do not have an unlock code. When trying to get one from huawei I get a hw_account_member_error... If anyone has a solution to fix that...
Click to expand...
Click to collapse
Ok all, I've got my bootloader unlocked. But how should I now root? What recovery image should I use??
dekraan said:
Ok all, I've got my bootloader unlocked. But how should I now root? What recovery image should I use??
Click to expand...
Click to collapse
Hello dekraan,
I have the same status with you. At this time, no way to root Ascend Mate 7 with OS 5.1. I tried to apply CWM recovery image (from OS 4.4.2) for it but not succesful
If you guys have TL-10 you may want to check out post #7 of ACBKA's thread below:
http://forum.xda-developers.com/mat...overy-twrp-2-8-6-0-mate7-android-4-4-t3136588
I was able to flash supersu and gain root through his nogui recovery.
khoanb1 said:
Hello dekraan,
I have the same status with you. At this time, no way to root Ascend Mate 7 with OS 5.1. I tried to apply CWM recovery image (from OS 4.4.2) for it but not succesful
Click to expand...
Click to collapse
I rooted my phone using KingRoot, after some try and error. I used version 4.1.237 or something like that? But I do not have a custom recovery to flash, so unfortunately I can't do much. Wanted very badly to install Xposed, but you have to flash a part, so thats no good..
I also rooted my phone with Kingroot 4.0.1.237, and replaced Kinguser with SuperSu. Now the rooted phone works fine. Looking for any custom recovery image.
Kingroot works fine on Mate 7 Android 5.1
Kingroot does not work on Ascend Mate 7 5.1.1, build B324.
Can anyone advise. I have CWM recovery installed, tried to install SuperSU, which says successful, but still no root.
sjhannan said:
Kingroot does not work on Ascend Mate 7 5.1.1, build B324.
Can anyone advise. I have CWM recovery installed, tried to install SuperSU, which says successful, but still no root.
Click to expand...
Click to collapse
see my post at http://forum.xda-developers.com/showpost.php?p=63244212&postcount=360
sjhannan said:
Kingroot does not work on Ascend Mate 7 5.1.1, build B324.
Can anyone advise. I have CWM recovery installed, tried to install SuperSU, which says successful, but still no root.
Click to expand...
Click to collapse
You used an outdated version.
Use a more recent version. Version 2.46
I need step by step root mate7 mt7-l09
for lollipop 5.1.1 B324, Please.
ส่งจาก HUAWEI MT7-L09 โดยใช้ XDA Forums Pro.
How do you install superSU w/ twrp?
khoanb1 said:
see my post at http://forum.xda-developers.com/showpost.php?p=63244212&postcount=360
Click to expand...
Click to collapse
Easy Computer said:
How do you install superSU w/ twrp?
Click to expand...
Click to collapse
Press Power+Up at bootup. Choose Install from the menu and browse to supersu zip file
Got mine rooted but titanium backup says its not rooted. Any fix for this?
Sent from my HUAWEI MT7-TL10 using Tapatalk
Easy Computer said:
Got mine rooted but titanium backup says its not rooted. Any fix for this?
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
Did you grant root for Titanium backup?
I want back stock recovery official to mate 7 TL-10 B324 android 5.1.1 Please help me ..
jamalnasir said:
I want back stock recovery official to mate 7 TL-10 B324 android 5.1.1 Please help me ..
Click to expand...
Click to collapse
View this Url http://forum.xda-developers.com/showpost.php?p=63260150&postcount=2
Hi All,
I would like just a little help on how to update correctly a rooted Honor 8 on MM 6.0 to Nougat 7.0 ?
Meaning from firmware B131 to B360 ?
OTA doesn't work, even when i disabled ROOT. I also tried bootloader to force update but it fails during the process.
Any idea what to do next? Do I need to relock the bootloader and remove TWRP before proceeding?
Thanks very much!
Unroot, flash stock recovery for the emui version you have
I guess this would also include a full wipe? Or is it possible to just update without wipe and still get a good result?
Sent from my FRD-L09 using Tapatalk
Hey Guys,
does somebody know where I can get a Rollback-package for Honor 8 FRD-AL10.
I looked on Huawei/Honor Websites, but did'nt find anything.
Thanks!
[email protected] said:
Hey Guys,
does somebody know where I can get a Rollback-package for Honor 8 FRD-AL10.
I looked on Huawei/Honor Websites, but did'nt find anything.
Thanks!
Click to expand...
Click to collapse
Can you tell me what is the version?
I'm also still looking for the rollback file. I have the FRD-AL10 version now on Android 7.0!
The Build-Number says NRD90M test-keys. I really need help, I'm searching since 2 days and was also writing with the support.
Thx for your help
DonKingShott said:
I'm also still looking for the rollback file. I have the FRD-AL10 version now on Android 7.0!
The Build-Number says NRD90M test-keys. I really need help, I'm searching since 2 days and was also writing with the support.
Thx for your help
Click to expand...
Click to collapse
1.you can download(AL10-B368)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v72987/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...87/f2/full/all/cn/update_data_full_all_cn.zip
2.You can do flash twrp and clear data and system .
3.flash update.zip and update_data_full_all_cn.zip
:angel:
OMG you are my hero I was searching sooo long, now it works fine
Soo Happy now Do you maybe also have the rollback file to marshmallow?
huawei honor 8 (frd-al00)
how i downgrade nougat to marshmallow for huawei honor8(frd-al00)?Please answer to me!please!
[email protected] said:
how i downgrade nougat to marshmallow for huawei honor8(frd-al00)?Please answer to me!please!
Click to expand...
Click to collapse
Download the zips provided on post 5 , Flash it using twrp
[email protected] said:
how i downgrade nougat to marshmallow for huawei honor8(frd-al00)?Please answer to me!please!
Click to expand...
Click to collapse
Frd-al00's rollback is different from l04.
If you are in official emui 5.
I suggested you download hisuite in huawei website, and then connect your phone to pc, click system update in hisuite, you will see rollback button.
Rommco05 said:
Hi, I can't find rollback button in my HiSuite
Click to expand...
Click to collapse
Maybe only for model al00
Rommco05 said:
hmm I will share this info to other members witch have China models, I hope will be work is a dissaster with rollbacks for this region (and another too)
Click to expand...
Click to collapse
That's good.
Here is downgrade guide in official huawei forum.
http://cn.club.vmall.com/thread-11316965-1-1.html
[email protected] said:
That's good.
Here is downgrade guide in official huawei forum.
http://cn.club.vmall.com/thread-11316965-1-1.html
Click to expand...
Click to collapse
I have REBRAND AL00 to L09 by https://forum.xda-developers.com/honor-8/how-to/guide-honor-8-to-frd-l19-t3632220
Pls help me from L09 back to AL00?
I don't have back up rom AL00, only back up OEM info
Interesting discussion. so is 360 the only version you can do a straight flash back to in TWRP, or is there a newer version?
Can the stock rom be rooted using Magisk or SuperSU - can one of them be flashed immediatedly after flashing the update zips before rebooting, while twrp is still loaded?
Rommco05 said:
B360 is first stable Nougat for most models and I starting from this firmware and after update device with OTA. Yes supersu works, I was using modified supersu wich is posted in twrp thread by openkirin team and I always install them after first boot to rom
Click to expand...
Click to collapse
Yes, but if you flash back to b360, it doesn't take OTA updates, and I don't want to relock the bootloader.
The main issue I have with stock is the inability to turn off the battery charging LED - it really annoys me.
Help.
Been messing around. I'm now on b380 but camera doesn't work and updates don't work. I've lost twrp, and if I try to install it it fails, although my boot loader says it's unlocked. It's there a way to flash the restore from a pc if I can't get twrp reinstalled?
Rommco05 said:
How u install B380?
Click to expand...
Click to collapse
Eventually resolved by downloading rollback package and b331 from Huawei site, and putting the update.app from each in dload on the sd card and forcing flash.
Frd-Al10 has native CallRecorder?
Hello. After update requires huawei ID log and pass. Can't use phone.
Does anyone know hot to fix it? Can't find rollback
i have unlocked bootloader and rooted my honor 6x emui 4.1 will receive official nougat or should i have to unroot and relock the bootloader to get update?
Only unroot is required and it is a must you do so before updating via Huawei system update
Sent from my BLN-L21 using Tapatalk
Thank you
is it ok to unroot via supersu app? or I have to flash stock rom again?
unrooted via supersu app still didn't get the update.
Ramesh006 said:
Thank you
is it ok to unroot via supersu app? or I have to flash stock rom again?
unrooted via supersu app still didn't get the update.
Click to expand...
Click to collapse
You will get the update notification (when it's ready) but it will fail if you don't unroot. It should be fine to unroot via the superuser app.
It (most likely) will install stock recovery so be prepared to fastboot twrp again.
If you have to force update by holding volume keys at powering on, be prepared for Bootloader to become locked again.
Sent from my Honor 6x using XDA Labs
Friends ,
I am using Honor 6x and rooted with TWRP recovery. I am on B320 firmware and model number is BLN L22. Indian model. Recently i got some issues in rom and decided to revert to fully stock unrooted.
So i have download B320 update.zip full firmware. About 1.6 GB. My question is how to flash it ? I need to go back to fully stock with bootloader locked. No more root needed.
I have just flashed L22 stock recovery now. So i have stock recovery and update.zip file.
Kindly guide me how to flash it without bricking . I am very new to 6x.
Edited at end:
Delete this post sorry i didn't seen the model number correctly , but the process is same find the rollback package out side.
They won't rollback like that ,u have to first rollback to emui 4.1 and then feom there go for latest emui. Safest method.
Here is the bll l22 rollback package
http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94065
Download and extract this there is update.app copy to external sdcard/dload now power off the device ,now press& hold all three buttons after vibrate release power button, it will update.
Then after download this http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94066
Now same as above one download-extract the update.app and copy to dload folder (delete the old one ) and power off and press and hold trick.
Done
venugopalu007 said:
Edited at end:
Delete this post sorry i didn't seen the model number correctly , but the process is same find the rollback package out side.
They won't rollback like that ,u have to first rollback to emui 4.1 and then feom there go for latest emui. Safest method.
Here is the bll l22 rollback package
http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94065
Download and extract this there is update.app copy to external sdcard/dload now power off the device ,now press& hold all three buttons after vibrate release power button, it will update.
Then after download this http://consumer.huawei.com/bd/support/downloads/detail/index.htm?id=94066
Now same as above one download-extract the update.app and copy to dload folder (delete the old one ) and power off and press and hold trick.
Done
Click to expand...
Click to collapse
Thanks friend but i already fixed it just now. After that only i am seeing post. Thanks for ur time.
I did not downgrade to EMIUI 4.1. I simply flash the update.app (EMUI 5.0) via dload method and now everything fine. Just now updated latest B330 via OTA and success. No need to downgrade.
Rajeev said:
Thanks friend but i already fixed it just now. After that only i am seeing post. Thanks for ur time.
I did not downgrade to EMIUI 4.1. I simply flash the update.app (EMUI 5.0) via dload method and now everything fine. Just now updated latest B330 via OTA and success. No need to downgrade.
Click to expand...
Click to collapse
cool bro
venugopalu007 said:
cool bro
Click to expand...
Click to collapse
Did u know B340 OTA is rolling out in India ?
Rajeev said:
Did u know B340 OTA is rolling out in India ?
Click to expand...
Click to collapse
B340 is about camera performance improvement and system stability , It might be flashable using TWRP, you can try it.
official roll-out will take few weeks.
venugopalu007 said:
B340 is about camera performance improvement and system stability , It might be flashable using TWRP, you can try it.
official roll-out will take few weeks.
Click to expand...
Click to collapse
I already revert back to full stock. No more root. Anyway i will wait for OTA. Thanks for ur helps
You are welcome bro
Please help..
Tell me how to root Honor 6x nougat b330..
sohailnaier said:
Please help..
Tell me how to root Honor 6x nougat b330..
Click to expand...
Click to collapse
Flash TWRP, and flash magisk
sohailnaier said:
Please help..
Tell me how to root Honor 6x nougat b330..
Click to expand...
Click to collapse
Go to the guides, news and discussion forum for that.
Sent from my Honor 8 using XDA Labs
First of all i would like to thank you senior members
For replying and giving ur presious time..
But there is no proper guide for honor 6x nougat..
It's for marshmallow emui 4.1
So please make some proper guide..
Because once i already bricked my device on emui 5.0
Presently my device is twrp and rooted on emui 4.1
But now i need to update because jio calls don't work on emui 4.1.
And not that expert as you guys
So please please help...
And i want twrp and root also..
I hope u understand my problem..
And sorry for my bad english
sohailnaier said:
First of all i would like to thank you senior members
For replying and giving ur presious time..
But there is no proper guide for honor 6x nougat..
It's for marshmallow emui 4.1
So please make some proper guide..
Because once i already bricked my device on emui 5.0
Presently my device is twrp and rooted on emui 4.1
But now i need to update because jio calls don't work on emui 4.1.
And not that expert as you guys
So please please help...
And i want twrp and root also..
I hope u understand my problem..
And sorry for my bad english
Click to expand...
Click to collapse
What's your build number and model?
Sent from my Honor 8 using XDA Labs
my model no is BLN-L22..
Currently built no is B132 emui 4.1
If there is working twrp and rooting.
I will upgrade my phone to 5.0
Build no B330 latest
sohailnaier said:
my model no is BLN-L22..
Currently built no is B132 emui 4.1
If there is working twrp and rooting.
I will upgrade my phone to 5.0
Build no B330 latest
Click to expand...
Click to collapse
Check this thread
https://forum.xda-developers.com/honor-6x/development/twrp-t3583413
Sent from my Honor 8 using XDA Labs
Is it necessary to flash magisk..
And what is this..
Keep vendor partition mounted" inside OpenKirin Settings
sohailnaier said:
Is it necessary to flash magisk..
And what is this..
Keep vendor partition mounted" inside OpenKirin Settings
Click to expand...
Click to collapse
It is necessary, since that you wanna be rooted. You can choose between Magisk or SU root method; Magisk is better than SU to me, it allows much more than SU thanks to modules, a systemless root and many more. If you choose to root with magisk, then the "keep vendor partition mounted" option is a thing that you can ignore since that it won't be needed. In case you'll decide to root with SU, please follow steps as stated in OP from TWRP thread.
Thank you soo much for replying..
But i want system write root..
Can we gain full root access with write system access via magisk
Yes u can get the full root access.
Rajeev said:
Thanks friend but i already fixed it just now. After that only i am seeing post. Thanks for ur time.
I did not downgrade to EMIUI 4.1. I simply flash the update.app (EMUI 5.0) via dload method and now everything fine. Just now updated latest B330 via OTA and success. No need to downgrade.
Click to expand...
Click to collapse
Hi..I am running currently on build B340,with twrp installed.factroy reset done,non Rooted. I am having issues with fingerprint scanner,so I want to go back completely to stock. can u guide me the steps that u did in the process..I am kind of noob in these things..thank u..and also can u upload the stock recovery files? Thank y for it time