Boot Loop Stuck on Logo Twrp works - Honor 6, 6 Plus Q&A, Help & Troubleshooting

I rooted and installed twrp recovery on my honor 6,after i installed a custom rom,it suceeded installation in twrp but when tried to reboot it i s stuck in the boot logo...HONOR POWERED BY ANDROID....PLZZZ HELPPPP

Brolin Michael said:
I rooted and installed twrp recovery on my honor 6,after i installed a custom rom,it suceeded installation in twrp but when tried to reboot it i s stuck in the boot logo...HONOR POWERED BY ANDROID....PLZZZ HELPPPP
Click to expand...
Click to collapse
Did you make a nandroid backup before flashing?
Sent from my Honor 8 using XDA Labs

Brolin Michael said:
I rooted and installed twrp recovery on my honor 6,after i installed a custom rom,it suceeded installation in twrp but when tried to reboot it i s stuck in the boot logo...HONOR POWERED BY ANDROID....PLZZZ HELPPPP
Click to expand...
Click to collapse
Now its time to learn installing update.app.
Try to get stock recovery and flash it from fastboot.
Later place update.app in /sdcard/dload/ folder and in power off condition, click volume down+ volume up+ power buttons. This will start installing original firmware . Within a minute phone will reboot and its done

Thanks..

Brolin Michael said:
Thanks..
Click to expand...
Click to collapse
You are welcome , can i know if u fixed it ?

Related

[ROOT] [TWRP] [CWM] Huawei Y5 II CUN-L21 / CUN-L03 / ?

1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment CWM_CUN-l03-l21.img recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
FOR L21 USERS: THIS ONLY WORKS FROM B103 UPDATE YOU CAN TRY WITH THIS(sdcard method) or THIS(not tested)
CREDITS: CELULARSERVICE.UY
Awesome man
hernankano said:
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment 3999777 recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
CREDITS: CELULARSERVICE.UY
Click to expand...
Click to collapse
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Sparkrite said:
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Click to expand...
Click to collapse
Thank you, I'm glad that it worked for you.
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
hollarp said:
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
Click to expand...
Click to collapse
You can backup your apps by using any of the apps available from play store, however without root these probably won't backup the apps data.
No need to backup system as this won't be affected by unlocking bootloader. The recovery partition will of course be overwritten when you flash TWRP.
Remember unlocking bootloader does factory reset the phone.
y5 cun-l21
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
t214 said:
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
Click to expand...
Click to collapse
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Sparkrite said:
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Click to expand...
Click to collapse
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
t214 said:
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
Click to expand...
Click to collapse
Don't know why its not working but here is a link to two genuine stock ROMS for the y5II.
http://consumer.huawei.com/lk/mobile-phones/support/downloads/huawei-y5ii_lk.htm
If you dont want to try flashing the whole rom then download "HuaweiUpdateExtractor" tool and extract just
the recovery partition from either of the roms and flash just that recovery.
Let me know how you get on.......
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
t214 said:
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
Click to expand...
Click to collapse
Which stock recovery did you flash and did you use the Huawei Extract tool to extract it, if so what size was it exactly?
i was trying to flash both with cun-l22 recovery using update.app
Excelent!!!!
Working on CUN-L23. Thanks!!!
t214 said:
i was trying to flash both with cun-l22 recovery using update.app
Click to expand...
Click to collapse
OK, you are not giving me much information as to EXACTLY what you are doing, like what commands you are using and the responses you are getting and so are making it very difficult for me to help you.
Do you have a working recovery or not ?
BTW you cannot flash the Update.app from recovery, I suggest you do some research on how to use Dload.
I have attached a small PDF to get you going.
Huawei Update extractor tool is very handy though.
custom recoveries from this topic dont work for me
my stock recovery (cun-l21) dont work(cant get it anywhere)
flashed recovery from cun-l22 works but from cun-l29 its not working
now i only have cun-l22 recovery working on my phone
trying to flash stock rom (CUN-U29, C567B128, Sri Lanka) using cun-l22 recovery it shows: "verify: uboot partition unallowed chang, old_address=1c80000, new_address=712000 error: partition verify is failed Update /sdcard/dload/update.app failed"
trying to flash stock rom (CUN-L22, C567B128, Sri Lanka) using cun-l22 recovery and it shows: "main version from property is cun-l21c79b104-1 the cur_num:1 update_num:1 version check failed error: current version is not in verlis, unallow to update Update /sdcard/dload/update.app failed"
i was trying to flash using recovery/vol up +vol down+power/in system option using update
Can I use this recovery on cun u-29
Same problem here as t214. I have the CUN-L21. Flashed twrp , didn't work , flashed back the L22 stock recovery , that doesn't work for me also so now i don't have any recovery. Does anybody have a solution for this ?
---
L.E. : managed to make the stock CUN-L22 recovery work , but still cannot flash TWRP or CWM , both cause 1-2 reboots and then normal booting , then i have to revert to stock again.
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
HellBlaZer69 said:
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
Click to expand...
Click to collapse
Hello. Do what sparkrite said on the first page. Download the full rom from that Huawei website (the cun-l22 one , but it works). Download huawei update extractor and load in it the update.app. inside you will see recovery.img. Right click and extract. Flash that. Worked for me , i have stock l22 recovery , i don't know if it will be a problem on the long run but i can't find it for l21 anywhere.

zenfomx max

i have installed twrp in zenfine max and after that flashed the lineage zip file but the phone wont boot into the system and stucks in the ASUS logo..
Still if i press the vol down and power button together it enters into the twrp mode.
only problem is that it doesnt boot into lineage os.
I tried installing the stock recovery , stock recovery installed successfully but it doesnt boot into the stok recovery mode..
Help me !!!!reply fst peoples
Karma__ said:
i have installed twrp in zenfine max and after that flashed the lineage zip file but the phone wont boot into the system and stucks in the ASUS logo..
Still if i press the vol down and power button together it enters into the twrp mode.
only problem is that it doesnt boot into lineage os.
I tried installing the stock recovery , stock recovery installed successfully but it doesnt boot into the stok recovery mode..
Help me !!!!reply fst peoples
Click to expand...
Click to collapse
The lineage ROM that you flashed, was it made for your specific model number?
Did you factory reset, wipe cache and dalvik in TWRP when you flashed your ROM?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

urgent help needed

I have aicp nougat rom installed on xperia l. I installed magisk 15 beta and safety net beta but got api error so I boot into twrp and flashed magisk 14 zip but since them phone is in bootloop couldn't able to boot into twrp. flashed twrp again tried button combination didn't work. I can able to boot in flashmode from their I tried to boot from command prompt didn't work. just bootloop with sony logo. pls help
Vinayakn73 said:
I have aicp nougat rom installed on xperia l. I installed magisk 15 beta and safety net beta but got api error so I boot into twrp and flashed magisk 14 zip but since them phone is in bootloop couldn't able to boot into twrp. flashed twrp again tried button combination didn't work. I can able to boot in flashmode from their I tried to boot from command prompt didn't work. just bootloop with sony logo. pls help
Click to expand...
Click to collapse
Download the Sony's flash tool then
Try going to fastboot then flash a recovery (try both flash tool and command prompt).
If it works format the system partition using the recovery and reinstall the new ROM
If it didn't work go to flash mode then flash the stock ROM using flash tool (you need to download the rom file your self) after flashing you will boot into stock ROM
If you already know what I mean good luck if don't try googling or reply:angel:
Nikhil kuttu said:
Download the Sony's flash tool then
Try going to fastboot then flash a recovery (try both flash tool and command prompt).
If it works format the system partition using the recovery and reinstall the new ROM
If it didn't work go to flash mode then flash the stock ROM using flash tool (you need to download the rom file your self) after flashing you will boot into stock ROM
If you already know what I mean good luck if don't try googling or reply:angel:
Click to expand...
Click to collapse
thank you so much friend fixed the issue with flashtool
Vinayakn73 said:
thank you so much friend fixed the issue with flashtool
Click to expand...
Click to collapse
Your welcome :fingers-crossed:

Honor 8 stuck on Your device is booting now

Hello,
I tried to flash TWRP on my honor 8 (unlocked bootloader), but when I flashed the recovery , I get stuck on your device is booting now, I can go to the system but I can't go on recovery
What should I do
Thanks
I can boot on the system when I have the option press power key to continue, if it helps
Calyptos said:
Hello,
I tried to flash TWRP on my honor 8 (unlocked bootloader), but when I flashed the recovery , I get stuck on your device is booting now, I can go to the system but I can't go on recovery
What should I do
Thanks
Click to expand...
Click to collapse
The TWRP In TWRP.com Does Not Work With The Honor 8 Android 7.
This Is The Right TWRP
https://forum.xda-developers.com/honor-8/development/twrp-t3566563

Redmi Note 7 doesn't reboot to TWRP recovery

Hello! After flashing the recovery.img and i tried to boot to the twrp recovery my phone automatically reboots to the system it doesnt go to TWRP recovery. What may be the problem? Please Help me, Thank you!
samdevy said:
Hello! After flashing the recovery.img and i tried to boot to the twrp recovery my phone automatically reboots to the system it doesnt go to TWRP recovery. What may be the problem? Please Help me, Thank you!
Click to expand...
Click to collapse
Which twrp u r using and how u tried to reboot in twrp via buttons or via fastboot? Is twrp is replaced by first boot? What is the message is showing in adb after fastboot flash recovery recovery.img command??
Sent from my Redmi Note 7 Pro using XDA Labs
Hey, why don't you try the Peter's twrp?
https://forum.xda-developers.com/re...uide-recover-destroyed-screen-note-7-t3956097
I don't have the orignal link to Peter's twrp but here is my thread where you'll find a zip containing the twrp. Hope this helps. Good day.

Categories

Resources