Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
i have backup with cwm if needed
FaceZone said:
My Lenovo A6000 hard brick or dead please help
no adb no fastboot no recovery nothing
just seen that on my PC
Qualcomm HS-USB QDLoader 9008
please help for un brick my phone
i have backup with cwm if needed
Click to expand...
Click to collapse
Flash your firmware
help please
Tyaginator said:
Flash your firmware
Click to expand...
Click to collapse
how can i flash firmware
because its a QualComm not MediaTek ??
please help
FaceZone said:
how can i flash firmware
because its a QualComm not MediaTek ??
Click to expand...
Click to collapse
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me!!
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
see i had cm12.1 on my lenovo a6000 plus, i installed miui7 it didnt work properly so i installed ressurection remix 13 and it destroyed my phone , first the imei number was erased, sound stopped working and sim cards didnt work, so i downloaded lenovos stock rom and installed it , and then my phone got stuck in the lenovo logo , it doesnt boot into recovery mode ,but it goes to fastboot without the help of adb , but when i try installing recovery.img via adb it says completed but when i try switching to recovery mode it doesnt , i tried installing adb drivers for my phone and itr says device not found , so what should i do now "?? i realy need help
XDA Visitor said:
see i had cm12.1 on my lenovo a6000 plus, i installed miui7 it didnt work properly so i installed ressurection remix 13 and it destroyed my phone , first the imei number was erased, sound stopped working and sim cards didnt work, so i downloaded lenovos stock rom and installed it , and then my phone got stuck in the lenovo logo , it doesnt boot into recovery mode ,but it goes to fastboot without the help of adb , but when i try installing recovery.img via adb it says completed but when i try switching to recovery mode it doesnt , i tried installing adb drivers for my phone and itr says device not found , so what should i do now "?? i realy need help
Click to expand...
Click to collapse
Hello,
Please register for XDA account to post and reply in the forum.
You may post your query here Lenovo A6000 Q&A Forum with all relevant details, the experts there maybe able to assist you.
-Vatsal
my phone is stuck. recovery mode is working but is unable to mount system as well as sd card and there is no OS installed. Every time i try to reboot or try to reboot into fastboot mode it shows a battery bar and then opens up recovery again. i am totally stucked plz help me. Device - yu yuphoria
prtk131998 said:
my phone is stuck. recovery mode is working but is unable to mount system as well as sd card and there is no OS installed. Every time i try to reboot or try to reboot into fastboot mode it shows a battery bar and then opens up recovery again. i am totally stucked plz help me. Device - yu yuphoria
Click to expand...
Click to collapse
First of all, this should be posted in the yu yuphoria forum (here), second of all, we need more info as in what got you bricked, what recovery you have etc. This device is quite popular so there are solutions on the net.
Hello,
My device is Lenovo Z90a40/Vibe Shot
My problem is when trying to install mokee from twrp
so first i delete data,dalvik cache etc. and somehow my phone shutted down
now im stuck at twrp and cant flash anything
tried to use QFil, says port 9006
and tried to flash rom from SD card, phone doesnt even detected it :crying:
so i can access twrp but i have no rom inside my int. storage
help please?
sorry if you dont understand