Please note:
I AM NOT THE ORIGINAL CREATOR OF THIS TWEAK
I have attached the file and the screenshot as evidence it works
How to enable google assistant with this tweak
1. Download this file
2. Install this file but don't run it yet
3. If you live in the UK like I do set you system language to the US or this app will force close on you
4. Go into voice input by going into settings -> language & input and then tap voice input and then tap on Enhanced voice input (if you don't do this then it will say that assistant is not you default assist app)
5. Then try out google assistant by long pressing the home button
6. And say what you want
Bugs:
It force closes sometimes but that is easily fixable by going into google assistant launcher and tapping the Google assistant icon down at the bottom
Some bugs but works 100% on a Vodafone smart first 7
Related
[ROOT] "Say OK Google" permanent in GNL and Hotword Detection in all screens
In the Google Now Launcher, As part of the "training" a message/prompt appears in the search bar that says "Say OK Google".
I know that I and a few other people on XDA and around the web found this feature quite neat and its little animations were quite nice.
However, after saying "OK Google" a few times to activate the Voice Search, the text would disappear as you were now "trained" and knew how to use the Hotword.
I was quite bummed by this obviously and always tried to get it back by clearing Google Search's data, which would reset my launcher settings too. This would reset the "training" and bring back the text but it had a downside and would also clear away all the apps/folders/widgets that I had on my homescreens.
A few days ago, Google Search was updated and a new feature was introduced which would enable you to say the OK Google Hotword on every screen e.g apps, lockscreen (You could only do this on homescreens in GNL previously). Unfortunately, Google decided to not make this feature available on the Moto X and Moto G (Which I currently have).
I found a thread on XDA which showed me how to enable this feature via a ROOT app called Unleash The Google
Basically, the app enables the dogfood/experimental/developer features of Google Search via Google Search Settings
After messing around with the new DogFood Features, I discovered that I could make the "Say OK Google" Text in GNL's Search Bar permanent instead of disappearing after a few uses.
I will tell you how to make the text permanent firstand later explain how to enable Hotword Detection on every screen
------------------------------------------------------------------------------------------------------------------------------------------------------
1. Download Unleash the Google
2. Install the app and open it. After it finishes loading, you should see a screen that tells you to force stop Google Search. Do so by going to Apps and FSing the Google Search app.
3. Now scroll down the Google Now screen, press the 3 dots and click Settings.
4. You should now see a space on the bottom that says Config Flags. Click it.
a) To get the "Say OK Google" Text all the time, press the 6th setting titled "Always_show_hotword..."
b) To enable the "OK Google Hotword on every screen" feature, turn on "Enable_E300" and "E300_Voice_Everywhere". scroll down to "speaker_id_supported_locales" and press it. type in "en-US" (Must be that and Im pretty sure its case sensitive).
5.After doing that, scroll all the way to the bottom and press "Save Config Settings".
6. Press the Home button on your Nav Bar and then press the search box.
You should now see the "Say OK Google" Text on your search bar and/or be able to say the "OK Google" Hotword from every screen by activating it by going back to "Google Search Settings" > Pressing Voice > Enable Audio History > Press OK Google Detection > Enable "From any screen" and/or "From lock screen". You should see a new screen with prompts. Complete Them and every thing should work fine !
Need to mention that I haven't enabled these settings for long so I'm still not 100% sure if the text will stay on forever
Don't forget to hit thanks if this helped you!
not working
I was looking for this for a really long time thank you
But this doesn't work on latest google version on 5.0.2 please man I really need this
After a lot of work I am presenting you my app to do the following: modeswitch / Spotify Control from SWC, voice dial using Google now.
Requirements:
1. Huifei type (MTCB) head unit
2. Root
3. Mtc-keys module (thanks MVG-V70)
4. Headunit service ( thanks Petrows)
5. Android 4.4.4 ROM
6. True contacts app( download inside head unit service), and enter your contacts manually/ sync with Google account ,transfer or restore from phone
Features:
1. acts as HW Modeschwitch ( radio, music, DVD, Spotify)
2. when the apps of the Modeswitch are rotating the unused apps are mute/killed so only one app is playing audio
3. control Spotify using next/previous of the steering wheel buttons ( when opened Spotify using the Modeswitch)
4. it gives the option to disable DVD in the rotation, as many devices haven't DVD drive or because it needs time to load.
5. Navigation monitor: it gives the option to select your navigation program, or add its package name manually, and if its running it will launch it again after changing the mode.
6. it starts playing music automatically in Spotify ( if Spotify its opened through Modeswitch)
7. for devices lacking HW Modeswitch button: either you map an other button as Modeswitch or it can run as sw modeswitch ( as of now the latter will brake the spotify control functionality-- will try to fix it later)
8. Act as a bridge between head unit service from Petrows and Google now to do voice dialing.
Installation:
1. Install and activate MTC-keys ( see its threat for details)
2. Install and activate headunit service from Petrows, inside the app settings activate call from android and install true contacts app.
3. Sync or add contacts to the true contacts app
4. Reboot device
5. Install my app and run it
6. Give Root access to the app when you will ask to
Setup
On the first app launch, it opens app settings with following options:
A. Select to include DVD or not
B. Activate software Modeswitch (if its activated, running the app from app drawer will change the mode)
C. Enter the SWC button code of the Modeswitch button ( default is 2, you can map any other button as well)
D. Choose to monitor your navigation, choose one option or enter navi app package manually
E. Activate or disable voice dialing
F. SAVE SETTINGS
TO OPEN SETTINGS AGAIN ONCE THE SETTINGS ARE SET DELETE APP DATA (ANDROID SETTINGS->APPS->MODESWITCH->DELETE DATA) and rerun the app.
6. ONLY IF YOU HAVE A MODESWITCH BUTTON OR WANT TO MAP AN OTHER ONE BUTTON TO ACT AS MODESWITCH:
edit mtc-keys.ini and add this line:
app_XX = com.myapp.modeswitch
XX is the value of modeswitch button code you entered in my app settings, default is 2
How it works:
1, To change mode, just press the modeswitch button (or run the application if you selected software mode in the settings)
2, To make a call: open google now, and say : call "contact name"
Bugs:
1. there is a nag screen if you do a voice call (mobile network is not available) but it doesn't affect the app, so for now it left there.
2. You tell me....
Thanks to:
Petrows (headunit service)
MVG-V70 for MTC-Keys @talalalal for the voice dialing
and everyone that helped me
Download:
https://mega.nz/#!cxhUjQbQ!E3rUK6HyR4ERU9Fc4d41syM1oP45EMDKTbmOwf5OiFg
XDA:DevDB Information
Modeswitch, App for Huifei (MTCB) Head Units (see above for details)
Contributors
p_mike83
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2016-02-07
Last Updated 2016-02-07
Google play seems to allow an install to go ahead with this app, but once the installer has finished, instead of saying 'installed', the green install button simply reverts back to saying 'install' again.
If I go to settings > accessibility > text to speech output, all options remain greyed out, and apps that require this (i.e. my mapping app, Locus Map) can't access it.
am on stock sony android 6.0.1 model d5803.
any ideas at all please?
[FRP] LG Stylo 3 FRP Bypass - Boost Mobile LS777
This tutorial is based off me freestyling then using the method of crashing the setup wizard i used on the TracFone variant here - https://forum.xda-developers.com/android/general/frp-lg-stylo-3-frp-bypass-tracfone-t3794325 . It works perfect for this model.
I'm hoping you have some experience manually removing FRP already before reading this. I'm trying to keep it short and simple. I did a video but I need to edit it before it get it online. First video! real basic but my future ones will be more professional.
Steps
1. Enable WIFI and enable Talkback then go to help then voice access and click on the title in the YouTube video not the share link. this will open YouTube.. bit different than others where you have the share ability available and you highlight the link.. hit share etc.
2. Go to the top right icon ( i )>settings> history & privacy or about> YouTube Terms Of Service. Next click top right home icon to get to chrome settings next scroll down and click settings scroll down to site settings and click it, click on location, it should say "location access is turned off for this device." click on the text highlighted in blue "turned off for this device." tap yes, click the highlighted text again if nothing pops up. Turn location on, tap agree, goto google location history, tap manage, now you are in google maps, top right click skip next hit the back arrow, now click the top left 3 lines (menu), tap "got it" now select start driving, tap "got it", top right click the microphone and say "settings" now you are in settings. If you don't land in settings but in the search just scroll over to "In Apps" and select "Settings" as it should show below.
3. While in security this first time go to Fingerprints and Security> phone administrators> turn find my device off by clicking deactivate. Now go to apps and disable/force stop then clear data/cache for each of these Guardian Gadget / Setup Wizard (should be 3) / Google Account Manager / Google Play Services.
4. Now goto bluetooth and turn on your bluetooth headset and pair the device. Restart your phone. Press your headset button and say "settings" you should get a message about google play services being disabled. enable it, hit back and go back into settings.
4b. Alternate step without headset: follow all steps above to get back into settings you will get a prompt along the way about google play services being disabled so enable it and get back to settings.
5. Go back to Fingerprints and Security and enable unknown sources. Get to google chrome and download these 3 apps and install / open each. Sidebar / quick shortcut maker / shortcut master lite. Swipe from the left on your phone with two fingers to bring the sidebar into view and add phone, file manager, chrome, google app, settings, quick shortcut maker and lastly shortcut master lite. Not all of these are required but if you want to screw around with finding some other shortcuts places they come in handy. I found a few other ways and also left them so that i could enable USB switch test and run UAT Universal Android Tool / Miracle Box / other boxes i have / apps to disable FRP via ADB. (this I haven't got around to just yet)
5b. Alternate step without headset: After you are in settings go to app> youtube> notifications> click top right icon ( i ), about then click on About Google Privacy Policy. Now you are in the browser.
6. **WARNING** whatever you do do NOT goto your android home via quick shortcut maker as it will throw up a message about FRP and auto reset/erase your phone disabling everything you've done thus far. So do not add it to sidebar or even click it.
7. Now click on settings and goto Apps, tap 3 dots, select show system apps and now you are going to Disable/Force Stop and clear Cache/Data of all these apps. Google App / Google Backup Transport / Google Calender Sync / Google Contacts Sync / Google Drive Promotion / Google One Time Init / Google Partner Setup / Google Play Services / Google Play Store / Google Services Framework / Google Text-To-Speech Engine / Setup Wizard (all 3).
8. Now pull into view the Sidebar and click on Shortcut Master Lite. Click on the top right 3 dots and click search. Type Setup Wizard into the bottom search field and click search. Now click on the first Setup Wizard link that shows. com.android.LGSetupWizard.SetupHomeInit and click launch.
9. You should be back at the setup screen. Forward through until you get to wifi and shut it off.
10. Now comes the last but fun part. We are going to crash the Setup Wizard. Go back to the start screen of the setup wizard and repeadtly go forward and back until the app crashes and do this until you see the home screen (remind you of iphone glitches? ha) it WILL work just have to do it many times. Once you get to the home screen, go into settings and enable developer mode then get into developer mode and enable OEM Unlock next goto Backup and Reset and reset your phone. DONE. Enjoy your phone now.
phonecapone
Sorry admins/mods accidentally posted to the wrong section. Can you move it for me please?
After 2 whole weeks of trying to remove the FRP on this tab I figured Id post how I did it because there is literally nothing on the internet.
How To Remove FRP Lock on Sprint AQT100
Firmware Version 5.1.1 - NKJ.02.42.01.04
1. Remove Sim From Device
2. Power On the Device and Follow all the prompts (mainly to connect WiFi)
3. Once you get to the sign in screen hit power button to turn off the screen
4. you should now have a lockscreen with a camera icon
5. launch the camera app take a photo and click on the new photo you just took
6. You you see a share icon click it and share it to the maps app
7. once maps opens accept all the dialog boxes might need to repeat step 6 until you get to the full maps app
8. once maps actually opens and it asks for you to add an account and you see the photo your trying to share just cancel the share
and hit the back arrow on the maps app to bring to you to the main maps app hit the menu button and click settings for the maps app
9. click on terms and privacy in the settings of the maps app then click on terms which should be the first item
10. scroll down a bit and hold the screen to select some text and upto click websearch once websearch opens delete what ever text is in the webseach and start typing settings
you will see the settings app in pop up in the search and just click it
11.now that you get settings open first go to security and enable unknown sources
12. now navigate to apps under settings and click the 3 dot menu up on the top right and select protected apps
13. locate chrome and click it it will now give you a lauch icon which you can now launch a full version of chrome
14. Once your able to launch chrome you can direct download -> Google Account Manager 5.1.1 and QuickShortCutMaker and follow the rest of the tutorials on google.
Not sure if i could provide links on here so I didn't I guess if you need more help post up and we can take it to DM for more assistance!
Aqt100
I made it all the way to downloading the apps and I can't figure out how to get some of the apps to download I need guidance to the rest of the process if you wouldn't mind sir