Galaxy S7 SM-G930 RZDA I guess is soft bricked, A buddy brought it to me.
It was originally a USA US CELLULAR Variant. I used my Z3X Box to unlock it, perfect turned out great.
he asked why the USC bootimg and bloatware ETC was still on it. I told him just because u unlock it doesn't mean it'll pop
up AT&T with just the change of a sim.
So then I De-brand it with the combo file-
COMBINATION_FA60_G930AUCU4APL2-VIA ODIN 3.12.3
and again perfect like a brand new phone.
now I'm all self taught learned on my own.
I just like to read before I act and screw something up.
so here's where I'm stuck, he brought it back wanting to know what root,twrp, etc meant.
I told him I know those things and how to do it but be patient give me some time to read into it I heard there is a lot of
complications with s7 at&t model as far as root and twrp and so on. well now he sold it to me cause he couldn't wait and took it else where here the problem.
The Phone only boots to a screen with the message.
SBL Error!
Set CP DEBUG
rdx_init!
skip print_summary_to_lcd..
(With an android img In the center screen with SBL ERROR UPLOAD MODE. beside it.)
With No Download Mode VOL-/HOME/ POWER attempt multiple times and screen goes black and comes straight back to the sbl error upload mode screen.
No Recovery Mode- when I press VOL+/HOME/POWER I get the message.
Set CP DEBUG
IDOQ : G(40), S(12) mA
CPU SERIAL NUM : 0xd43d9324
Fused open loop voltage: 1010mV
Cannot Check RPMB PROVISIONING [-1]
RECOVERY BOOTING....
It also isn't detected by adb drivers on hp laptop win 10 64bit/ or the z3x box its only picked up as a comm port.
shows up as a modem and in devices and printers its listed as MSM8996.
Odin picks it up but will not flash either it stays on setup connection or straight to fail.
Plz and thanks for any help this is my first poist just need a little direction on postings and on this problem I'm beat. thanks again
ok nevermind cant figure out how to add a pic to the post lol help again?
hoss87 said:
Galaxy S7 SM-G930 RZDA I guess is soft bricked, A buddy brought it to me.
It was originally a USA US CELLULAR Variant. I used my Z3X Box to unlock it, perfect turned out great.
he asked why the USC bootimg and bloatware ETC was still on it. I told him just because u unlock it doesn't mean it'll pop
up AT&T with just the change of a sim.
So then I De-brand it with the combo file-
COMBINATION_FA60_G930AUCU4APL2-VIA ODIN 3.12.3
and again perfect like a brand new phone.
now I'm all self taught learned on my own.
I just like to read before I act and screw something up.
so here's where I'm stuck, he brought it back wanting to know what root,twrp, etc meant.
I told him I know those things and how to do it but be patient give me some time to read into it I heard there is a lot of
complications with s7 at&t model as far as root and twrp and so on. well now he sold it to me cause he couldn't wait and took it else where here the problem.
The Phone only boots to a screen with the message.
SBL Error!
Set CP DEBUG
rdx_init!
skip print_summary_to_lcd..
(With an android img In the center screen with SBL ERROR UPLOAD MODE. beside it.)
With No Download Mode VOL-/HOME/ POWER attempt multiple times and screen goes black and comes straight back to the sbl error upload mode screen.
No Recovery Mode- when I press VOL+/HOME/POWER I get the message.
Set CP DEBUG
IDOQ : G(40), S(12) mA
CPU SERIAL NUM : 0xd43d9324
Fused open loop voltage: 1010mV
Cannot Check RPMB PROVISIONING [-1]
RECOVERY BOOTING....
It also isn't detected by adb drivers on hp laptop win 10 64bit/ or the z3x box its only picked up as a comm port.
shows up as a modem and in devices and printers its listed as MSM8996.
Odin picks it up but will not flash either it stays on setup connection or straight to fail.
Plz and thanks for any help this is my first poist just need a little direction on postings and on this problem I'm beat. thanks again
ok nevermind cant figure out how to add a pic to the post lol help again?
Click to expand...
Click to collapse
Did you ever find your fix?
I'm exactly in the same situation. Nothing that I know help me to get out of this sbl error screen. And nothing that I've found online was usefull (and I've searched each day during 1 week in every reachable sites in many different languages). Except this method that I've seen on a couple of forums and I didn't tried it yet:
mathewfb1907 said:
hi bro help pls
If for some reason it doesn't work, then try to create an emergency scdard from an identical model with identical firmware version as your broken one, root it by eng-boot, read out the first 1GB of the "sda" partition, write the dump to a fast class U1/U10 32GB sdcard using Win32Disk, insert the card into the sdcard slot and power it up while holding Vol Down + Home + Power. If everything was done correctly, the phone should boot into download mode, then just flash the latest full stock to fix it.
To create an emergency sdcard for Qualcomm based G930/G935:
adb shell
su
dd if=/dev/block/sda of=/storage/emulated/emergency.bin bs=1024 count=131072
exit
adb pull /storage/emulated/emergency.bin
g930a-v models same sda flash
Click to expand...
Click to collapse
Do you find a solution?
Related
any1 have a copy of Bell/Virgin LG Eclypse C800G Stock Rom/backup? and info how to re-add the rom back to the phone?
I restarted my phone and now its stuck on the LG Logo boot screen. I tried doing the Hard reset using Vdown + A + F + Power came up with the android logo and still nothing. now since doing the hard reset its just always after turning on it goes into the reset mode then lo boot logo and sticks with the boot logo.
Thanks
P.S. sorry if this is in the wrong section and if so please place it to right section without deleting topic? Thanks
anyone?
Please I'd be most thankful if you could help me out as i really need the phone since the wife is 8months pregnant and I need the phone just in-case she goes into early labor and I'm out or at work she can call me.
Thanks
solution yet?
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
Nope sorry. Wish I did.
DROIDNOOB79 said:
hey i was wondering if u found a solution yet as i am having the same problem with the same phone my c800g boots up to restore screen then stops and goes to LG screen, none of the key combinations work that iv found to get into recovery/fastboot/cmw so i am lost at what to do now
Click to expand...
Click to collapse
where did you buy the phone?
i got it off my roommate he just turned it off one night then when he turned it back on it was stuck on LG screen then i tried a restore and now it gets stuck on the restore/ android unboxing screen then it stops and reboots and does it again
I believe that I have found the Stock Rom for the LG Eclypse | LG-C800G
LG Eclypse | LG-C800G Stock Rom in KDZ file format:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
I'm new to this so if anyone knows how to load the .KDZ file to the phone can you please let me know?
Thanks
BTW I found the ROM by going here:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>YOUR IMEI WILL BE HERE</esn>
<model>LGC800G</model>
<suffix>AVMBDG</suffix>
<msn>YOUR PHONES S/N WILL BE HERE</msn>
<esn_date>THE DATE OF THE IMEI WAS CREATED</esn_date>
<sw_version>V10C_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_url>
<sw_locale_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Thanks to Crashff over @ androidforums.com and his/her post @- http://androidforums.com/t-mobile-mytouch-q/589060-c800-submodels-g-dg-vl.html
I would like to inform XDA-Dev that the LG Eclypse | LG-C800G Stock Rom in KDZ file format is the true stock rom for the LG Eclypse | LG-C800G. I have tested it and it recovered my device.
I will give a lil info on how I did it the best I can but bare with me as I was not really keeping track on what I was doing when i did it.
1.) Download the LG Eclypse LG-C800G Stock Rom in KDZ file format by going
here:
- http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=INSERT IMEI HERE
and enter your IMEI where you see INSERT IMEI HERE in the address bar
or if your with (Virgin Mobile CANADA) then here:
- http://csmg.lgmobile.com:9002/swdata/WEBSW/LGC800G/AVMBDG/V10c_00/V10C_00.kdz
2.) Plugged in the phone
3.) I disabled the lge android platform usb modem
4.) I clicked on msxml.msi and
uninstalled it. then reinstalled after
uninstall was completed
5.) right clicked on KDZ_FW_UPD.exe ( You can download KDZ_FW_UPD.exe here: http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698 ) and
went to Properties then Compatibility and selected Windows XP SP2.
I also clicked on Run this program as an administrator. then pressed Apply or OK
6.) I then opened up B2CAppSetup.exe (DON'T DO ANYTHING WITH IT YET wait till you get to ((STEP 10)) ) it can be found here: http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
7.) I then ran KDZ_FW_UPD.exe and only changed the phone mode to EMERGENCY or CS_EMERGENCY I can't remember what one i picked so try all.
8.) I then selected the KDZ File
9.) I then pressed Launch software update as it was extracting the KDZ file
I did this (Step 10)
10.) I then went back to B2CAppSetup.exe then clicked on Customer Support then clicked on Recovery Phone then I entered in my IMEI then pressed Check
and there ya go. the B2CAppSetup.exe should look for and download your rom as KDZ_FW_UPD.exe starts recovering your phone. now let both complete even if one says its done.
Again hope this helps and sorry if its not a good guide as i was not keeping track as to what I was doing.
Lnks not working for the downloads
Plz am currently in gh same situation bt th lknks are not working. plz help me find th stock fom since I've looked allover in vain.
Halp
I need this, I have the T-mobile version of the rom. But I would really like the Canadian version, without the T-mobile **** on it.
This is in response to LG AS730 (L7 Variant) Rooting / Unbricking / More, http://forum.xda-developers.com/showthread.php?t=2102104. This was a very helpful thread but it has a broken link for the cab firmware. I have found an easier way to fix the security error anyway. Just follow the first two steps and boot your phone into emergency mode (Vol Down + Up / Then plug in USB) with LG support tool running. Click options, upgrade recovery, and it will ask you for a Serial # / Model or MEID #. It will download the correct stuff (im not an expert), and install it on the phone. Boots right up. The reason i got into this mess was because I un-installed the wrong apps after I rooted. I didn't heed the warnings of others, i think it was chrome but I'm not sure. Anyway I just wanted to put this out there to save some hassles if any one else has done this.
Hi there Guys ..
I Have Infuse 4G AT&T .. I Got Bored Of Its Os at&t Froyo.
I wanted To upgrade It To Jelly Bean Using CWM
I've Successfully Rooted it Using SuperOneClick.
And When I Wanted To Flash CWM 6 .. THE electricity Is Out .
And My Phone Stuck at weird Error .. It's Like black screen and In the middle of it
Cellphone .. Triangle .. PC
and I can't log in Recovery Mode or even Download mode
I dunno really what to do .. Please help guys.
Thank You All.
Da.Game said:
Hi there Guys ..
I Have Infuse 4G AT&T .. I Got Bored Of Its Os at&t Froyo.
I wanted To upgrade It To Jelly Bean Using CWM
I've Successfully Rooted it Using SuperOneClick.
And When I Wanted To Flash CWM 6 .. THE electricity Is Out .
And My Phone Stuck at weird Error .. It's Like black screen and In the middle of it
Cellphone .. Triangle .. PC
and I can't log in Recovery Mode or even Download mode
I dunno really what to do .. Please help guys.
Thank You All.
Click to expand...
Click to collapse
Bummer.
When you plug it into the PC, does anything (weird) show up in Windows Device Manager? Like "QHSUSB_HOST"?
If so, you are left with three options:
QPST (which it's more than difficult to find the right phone files for)
Cascading boot (someone here should be able to generate a debrick.img for you)
JTAG service
I've done option two before for a different phone, and it''s pretty slick. Here is what you need:
A block-for-block dump of a working Infuse (first ~80MB)...have someone with a working Infuse do this:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.bin bs=1024 count=81920
A (in your case) 16GB MicroSD card (or higher)
To know this guide inside-out: http://forum.xda-developers.com/showpost.php?p=52067470&postcount=365
Basically you overwrite the SD card with the debrick image, pop it into the device and power up, attempting to get to Download Mode (vol button + USB insertion). The phone will fail on internal storage (as usual), but then it will attempt again this time via external storage. It should load the corrupted bits off the SD card instead, and get you into a bootable state again.
Then, all you need is to ODIN flash back to stock.
Unfortunately, I sold my device last year so I cannot get a debrick file for you. But someone here should be able to provide. :angel:
thanks brother.
I'll try this option .. And ill let you know .
Unfortunately I can't upload image I wanted to show u it .. Cause I'm still new at forum
But thank you so much ill try it .. And ill give you feedback.
joel.maxuel said:
Bummer.
When you plug it into the PC, does anything (weird) show up in Windows Device Manager? Like "QHSUSB_HOST"?
If so, you are left with three options:
QPST (which it's more than difficult to find the right phone files for)
Cascading boot (someone here should be able to generate a debrick.img for you)
JTAG service
I've done option two before for a different phone, and it''s pretty slick. Here is what you need:
A block-for-block dump of a working Infuse (first ~80MB)...have someone with a working Infuse do this:
Code:
dd if=/dev/block/mmcblk0 of=/sdcard/debrick.bin bs=1024 count=81920
A (in your case) 16GB MicroSD card (or higher)
To know this guide inside-out: http://forum.xda-developers.com/showpost.php?p=52067470&postcount=365
Basically you overwrite the SD card with the debrick image, pop it into the device and power up, attempting to get to Download Mode (vol button + USB insertion). The phone will fail on internal storage (as usual), but then it will attempt again this time via external storage. It should load the corrupted bits off the SD card instead, and get you into a bootable state again.
Then, all you need is to ODIN flash back to stock.
Unfortunately, I sold my device last year so I cannot get a debrick file for you. But someone here should be able to provide. :angel:
Click to expand...
Click to collapse
debrick.bin
From my cm-11 infuse
This happened to me before, that yellow triangle thing, just flash back Stock fryo via odin and you're good to go
Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool
Hello, I was having issues with my phones (ZTE MAX XL N9560) cellular network, being that although I was having no problems with my phones signal and even had good data connection on my phone I realized I couldn't receive any calls or text messages on the phone, It simply didn't work anymore...The network was good, internet connection was also good but I noticed carrier services such as text messaging were simply not working and to cap it all off, My wireless tethering mobile hotspot was also not working too. I tried tinkering with the network settings even using the android hidden menu *#*#4636#*#* to change the network bands trying to see if it would somehow solve my dilemma but ALL to no avail. So I finally decided to flash the stock rom of the phone in desperate hopes it would be my saving grace but as LUCK would have it the flashing process failed. The QFIL software I was using to flash the stock gave me a FLASH FAIL: FIREHOSE.MBN WAS UNABLE TO LOAD THE IMAGE; AND THAT WAS THE HAMMER ON THE NAIL FOR MY PHONE IT HARD BRICKED. So right now I'm left with a dead phone unable to to power it on, go to FTM mode and even worse it wont boot to EDL mode(Emergency Download Mode) which would have given me hopes to restore the phone. I'm only able to boot it to the ZTE HANDSET DIAGNOSTIC MODE which enables my computer to identify the phone. I've tried using several other qualcomm and zte device flashers and its either I get a FAIL UNABLE TO SWITCH TO EDL MODE or it flat out wont work at all
Can anyone, somebody please help me out with this please ......
THANKS:good:
if you got the right firehouse programmer and you have qfil/qset set up right with your files in the right places...and the correct ROM/firmware....I'm gonna ask you a crazy question ..Doesthe folder that your rom is in probably have the name of the firmware build like when downloaded normally right?? but I was in a similar situation with an alcatel I dug and dug and on Qualcoms dev site and I dont wanna search for it because it would probably take a month to locate the web site said with instructions to change the name of your ROM file to a file name with just 7 numbers not matching... I used 8675309 and it worked...my jaw dropped and I had fastboot
Do a search in here for the ZTE DFU MultiDL A2017X tool.
I bricked my N9560 and it puts it into EDL mode.