Database Info

[Q] Quadrant - System Information

Hello guys,
When using Quadrant and looking at System Information under CPU it says "Cores 1". I tried the same app with Sensation One S and there is shows "Cores 2".
Is there something wrong with one of the cores on my Sensation, or is the app showing something wrong?

What ROM and Kernel are you using?
You could have a Kernel that's not utilizing the 2nd core, thus Quardrant wouldn't recgnize it's there.

Skipjacks said:
What ROM and Kernel are you using?
You could have a Kernel that's not utilizing the 2nd core, thus Quardrant wouldn't recgnize it's there.
Click to expand...
Click to collapse
I'm on stuck ROM 4.0.3.

Both cores on my phone show up on quadrant. Maybe your version needs updated?

Kevc44485 said:
Both cores on my phone show up on quadrant. Maybe your version needs updated?
Click to expand...
Click to collapse
I'm using version 2.0. Even tried to un-install and re-install.

Something is going on here. This morning when I ran the benchmark I got a score of about
2700 with both cores. Now when I run a benchmark I get a score of about 2200 with only one core showing up. Something is definitely wrong.

I'm only getting around 2200 every time. And it shows 1 core only every time...
EDIT:
If I restart my phone (no fast boot) go to System Information then it shows 2 cores.
If I do a Full Benchmark and after that go to System Information again, than it shows 1 core only.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

There´s nothing wrong with Quadrant showing sometimes 1 core and sometimes 2 cores.
The second core on the Sensation is deactivated, and reactivated when certain thresholds are reached on system load.

Not running on "performance"?!
You guys need to get some sort of app like SetCPU or similar and set your Governor to: Performance THEN do any benchmarks...oh, and of course close any programs running in the background and etc...
Also may want to tweak it up to 1.5 or 1.7 (currently on 1.7) and govern it to be OnDemand or Intellidemand and it'll only crank it up when you need it most.
---------- Post added at 01:29 AM ---------- Previous post was at 01:19 AM ----------
Consistently over 3000 (avg. 3200)...probably could be higher with a different Kernel and stuff but using one that saves on the juice.

NEW version just released:
What's in this version:
v2.1 changes:
Fixed detection of CPU cores on HTC Sensation
Restored the result browser

[NEWS] Galaxy S4 Specs and Photo.

Hello xda,
Thanks to sammobile we now have the details and photo of the Galaxy S4
Specification's;
- Exynos 5450 clocked at 2Ghz Quad core
- Mail T658 GPU
- 2GB Ram
- 4,99" screen super amoled full HD (1080x1920)
- 13 Megapixel camera at the back
- 2 Megapixel Camera at the front
- Android 4.2.1
Photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source:
Sammobile

If they use software buttons, wouldnt that be 4.8"?
Sent from my GT-P3100 using xda app-developers app

safariking said:
Hello xda,
Thanks to sammobile we now have the details and photo of the Galaxy S4
Specification's;
- Exynos 5450 clocked at 2Ghz Quad core
- Mail T658 GPU
- 2GB Ram
- 4,99" screen super amoled full HD (1080x1920)
- 13 Megapixel camera at the back
- 2 Megapixel Camera at the front
- Android 4.2.1
Photo:
Source:
Sammobile
Click to expand...
Click to collapse
Super smartphone :thumbup:
Sent from my Android Smartphone

OptimusLove said:
If they use software buttons, wouldnt that be 4.8"?
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I think it will use Capacitve buttons and i don't really think it will get a 4,99'' screen to big i think 4,7 or 4,8'' will be perfect

dkmali said:
Super smartphone :thumbup:
Sent from my Android Smartphone
Click to expand...
Click to collapse
+1

Galaxy S IV Not availble before May!

"Let's announce an unconfirmed rendering just weeks before CES even though when we did it last year every leak was wrong." Genius.

L Speed - Parameter testing|suggestions

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the parameter testing&suggestion thread for L Speed. Main usage of it is testing different kind of parameters (dev&user suggestions).​
Please follow rules before you post anything.
Rules:
- Write your device model (It's really important because of hardware specifications)
- Current ROM&Kernel
- Pass some results WHY are suggested parameters good (logs, benchmarks, screenshots)
The most important rule:
- If you do not know what are you doing, don't post anything

Yup let's share this one
Xiaomi Mi Max Pro 128GB - MiUI 8 Global Dev Nougat
Got 86k nearly 87k on Antutu instead of 74k

D.Price said:
Yup let's share this one
Xiaomi Mi Max Pro 128GB - MiUI 8 Global Dev Nougat
Got 86k nearly 87k on Antutu instead of
Click to expand...
Click to collapse
Probably you misunderstood thread a bit, but nvm, i'll explain
This thread is dedicated for parameter suggestions and testing, by that I mean, that anyone can suggest parameters change, own formulas and so on.

Paget96 said:
Probably you misunderstood thread a bit, but nvm, i'll explain
This thread is dedicated for parameter suggestions and testing, by that I mean, that anyone can suggest parameters change, own formulas and so on.
Click to expand...
Click to collapse
Maybe I should sleep sometimes..... xD
Sorry !

Howdy, Nice app.
The values for the intelliactive governor are wrong for the Samsung Galaxy S4. The correct values are in the screenshot.

sleekmason said:
Howdy, Nice app.
The values for the intelliactive governor are wrong for the Samsung Galaxy S4. The correct values are in the screenshot.
Click to expand...
Click to collapse
What values are wrong?? target_loads for interactive governor?
Don't worry about it, kernel will chose the closest possible freq, that's the way of how it's work.

S8+ Bootsplash for S7 g930f HELP

Hey everyone.... so I'm trying without 100% success to get a centered s8+ bootsplash on my s7. The only one i got to work was off center which with my OCD isn't good enough. Does anyone have a proper .tar that i can flash via Odin to get a centered s8+ bootsplash?
just fyi this one > i have attached isn't centered!!!http://cloud.tapatalk.com/s/592164818a030/[S7][FLASHABLE]S8+_SplashScreen+LPM_Animation_V2.zip
Sent from my SM-G955F using Tapatalk

why u want that?

smikel82 said:
why u want that?
Click to expand...
Click to collapse
Because it's xda site place where we can customize our devices as we want :silly: if it's possible then why not?

maybe he want to sell his s7 as s8 lol

ever fix it
Hey i still have the same issue. nobody seems to care ? been 6 months. and with every single s8 port Rom its always like my picture for s8 bootsplash. phase i can't find the correct resolution. I've tried like 50 times. always too small or too big

bustyouup4free said:
Hey i still have the same issue. nobody seems to care ? been 6 months. and with every single s8 port Rom its always like my picture for s8 bootsplash. phase i can't find the correct resolution. I've tried like 50 times. always too small or too big
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G955F using Tapatalk

this is what it should look like. as you all see its not correct resolution... anyone know what size it needs to be
Sent from my SM-G955F using Tapatalk

The last picture is how it should look... filling up screen and being center. but it's too small and its not correct resolution. anyone have a idea what size is correct. I've tried like 30 dif size and each time have to edit picture, create zip then flash to test. anyone please!!!! you have looked 600+ times but nobody answer or try to help
Sent from my SM-G955F using Tapatalk

Themes / Apps / Mods Enable 90fps [NON-ROOT]

I got this apk from a test unit, it woks on my friend's ROG Phone 5, you'll get 90fps on quick settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

90fps seems to be the sweet spot for battery life, but I'm a little suspect here haha.
I remember seeing an ASUS mod on zentalk saying that they would not be offering that option. 120hz panels in general can produce a 90hz refresh rate, but it would actually look worse than 120hz AND 60hz. There is no 90hz profile for the panel. If you force the screen to run 90hz without the proper profile you will get some wonky color issues/color banding etc.
Forcing a 90hz refresh without the proper support behind it makes no sense.
If this is true, I'll stick with the 60hz for casual use and change manually when gaming to something higher. The Rog phone 3 can actually be set at 160hz via an adb command, but that doesn't mean there is a visual difference there.
I'm regurgitating what I've read there, but one of the posters is very informed and has been in the rog phone community for quite a bit of time.
If you want to read the thread on zentalk, search "Rog 5 refresh rate" on their site.

In the newest firmware, they added proper support for 90.

twistedumbrella said:
In the newest firmware, they added proper support for 90.
Click to expand...
Click to collapse
Well I'll be damned haha. Hopefully they update the user settings to make it selectable without any tweaks. Thanks for the update

twistedumbrella said:
In the newest firmware, they added proper support for 90.
Click to expand...
Click to collapse
Wait what? Have they? Or are you talking about rog phone 3 firmware?

junnelle said:
Wait what? Have they? Or are you talking about rog phone 3 firmware?
Click to expand...
Click to collapse
This is the 5
https://gitlab.com/twistedumbrella/ASUS_I005_1-kernel/-/commit/4cd43c7fab53f8e9af6fc2f56a9ede953b33b30a#79cadd884865d2084ee2b7ef9d43815eeb077df7

Any app for 5s? I think this only works for 5.
It works after reboot even without the app.. Thanks for this

screens are the same, GPU is the same, so is cpu, only difference are the size of mem.
Why wouldn't it work?

Thanks bro work 100%