Database Info

Guide: Huawei Rollback and firmware version change guide; Back TO BLN-L21C185

To get to Andorid 7, I used Firmware finder method as send to updated and flashed "BLN-L21C432B342" Firmware finder send to update method.
Most of the updated using from: http://hwmt.ru/oth/HWFF/info/view.php?find_model=bln but it does not have second update package which is needed to flash to get the updater app and others.
Guide to get back to BLN-L21C185
DIAL: *#*#2846579#*#*
GO TO : 2.Veneer Information >
1.Version info >>Manufacture Information is your actual model: (my is: BERLIN_L21 i.e.: BLN-L21)
Scroll to end there will be current version, this is the version you need to use to roll back.
My was Bln-l24
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consumer/support/downloads/index.htm
Above are flashed using Sd card dload method and they worked. 1st flash roll back package and let the phone start to normal than again flash the android 6 package "BLN-L24C567B110".
Now you are back to BLN-L24 but setting is showing BLN-L110.
Anyways now you have updater app back so use the same method to get back to BLN-L21C185B131 (android mm).
I did not roll back and instead flashed BLN-L21C185B342 as it is available now, using firmware finder send to update: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 and bingo back to C185 andorid 7 with updater app.
FACTORY RESET YOUR PHONE IN THE END.

My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx

Tangra said:
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Click to expand...
Click to collapse
You should have used the method sent to updater.. anyways you have to flash the second half part of it.. "
update_data_full_BLN-L21_hw_meafnaf.zip"
I am uploading the second part which you should be able to flash using dload to get the complete update with updater working.
Will share the link soon.

How is it
omair.anwer said:
To get to Andorid 7, I used Firmware finder method as send to updated and flashed "BLN-L21C432B342" Firmware finder send to update method.
Most of the updated using from: http://hwmt.ru/oth/HWFF/info/view.php?find_model=bln but it does not have second update package which is needed to flash to get the updater app and others.
Guide to get back to BLN-L21C185
DIAL: *#*#2846579#*#*
GO TO : 2.Veneer Information >
1.Version info >>Manufacture Information is your actual model: (my is: BERLIN_L21 i.e.: BLN-L21)
Scroll to end there will be current version, this is the version you need to use to roll back.
My was Bln-l24
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consumer/support/downloads/index.htm
Above are flashed using Sd card dload method and they worked. 1st flash roll back package and let the phone start to normal than again flash the android 6 package "BLN-L24C567B110".
Now you are back to BLN-L24 but setting is showing BLN-L110.
Anyways now you have updater app back so use the same method to get back to BLN-L21C185B131 (android mm).
I did not roll back and instead flashed BLN-L21C185B342 as it is available now, using firmware finder send to update: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 and bingo back to C185 andorid 7 with updater app.
FACTORY RESET YOUR PHONE IN THE END.
Click to expand...
Click to collapse
What about themes app is it work and are there a rollback package if you didn't like it

First of all thanks for this wonderful post, you did a great job.
Don't mind it but you have made a great post, without a great title/name, so i suggest you to modify the title of the post, these kind of posts are very helpful for people like me and others but most of the people out there use google to search help they don't know the XDA, so if you modify and give a better title to your thread it will be easily found by searchers.
Lastly what is the main difference of numbers after BLN-L21 i.e. mine is L21C185 on the about phone but the hidden info *#*#2846579#*#* and Veneer Information and version information says at Manufacturer Information BERLIN_L21_VN1 AP Version is L21C900B131_SYSTEM while the Parameter Version says C185, NOW what is my devices real name and which firmware should i be downloading for my device if i want to roll back to 6.0.1?

Mohammad.b said:
What about themes app is it work and are there a rollback package if you didn't like it
Click to expand...
Click to collapse
Theme app is working.

omair.anwer said:
You should have used the method sent to updater.. anyways you have to flash the second half part of it.. "
update_data_full_BLN-L21_hw_meafnaf.zip"
I am uploading the second part which you should be able to flash using dload to get the complete update with updater working.
Will share the link soon.
Click to expand...
Click to collapse
Link. It's only drive so can only keep it for about a month. By then I hope more people have uploaded it else where.
https://drive.google.com/file/d/0B_aM97XRoZYwSFpNeUstb2ZyaFE/view?usp=drivesdk

talvigi said:
First of all thanks for this wonderful post, you did a great job.
Don't mind it but you have made a great post, without a great title/name, so i suggest you to modify the title of the post, these kind of posts are very helpful for people like me and others but most of the people out there use google to search help they don't know the XDA, so if you modify and give a better title to your thread it will be easily found by searchers.
Lastly what is the main difference of numbers after BLN-L21 i.e. mine is L21C185 on the about phone but the hidden info *#*#2846579#*#* and Veneer Information and version information says at Manufacturer Information BERLIN_L21_VN1 AP Version is L21C900B131_SYSTEM while the Parameter Version says C185, NOW what is my devices real name and which firmware should i be downloading for my device if i want to roll back to 6.0.1?
Click to expand...
Click to collapse
Hi, i understand if information is not easy to find it of little value suggest me a name and i will change it.
If you are on android 7 you need to first download the roll back package of the "version component version" showing in veneer info and flash it, then flash the same version android 6 latest package. Then use the firmware finder send to update method to get back to your real version either andoid 6 or android 7 as your prefer.
I have seen c185 is used used for middle east market.
"Manufacturer version" is your real device variant. (your need to download this to roll back with the roll back package if your are on android 7)
"version component version" is your current installed firmware Version.
Ideally they should be same but if firmware finder is used to install different variant firmware, to get to a newer android version or for some other reason than these both miss match.

omair.anwer said:
Hi, i understand if information is not easy to find it of little value suggest me a name and i will change it.
"Manufacturer version" is your real device variant. (your need to download this to roll back with the roll back package if your are on android 7)
"version component version" is your current installed firmware Version.
Ideally they should be same but if firmware finder is used to install different variant firmware, to get to a newer android version or for some other reason than these both miss match.
Click to expand...
Click to collapse
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
omair.anwer said:
Link. It's only drive so can only keep it for about a month. By then I hope more people have uploaded it else where.
https://drive.google.com/file/d/0B_aM97XRoZYwSFpNeUstb2ZyaFE/view?usp=drivesdk
Click to expand...
Click to collapse
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you should write its name and version above the link, Thanks.
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
Tangra said:
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Click to expand...
Click to collapse
@Tangra , It has been suggested by some guys on this thread https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 , that we should go back to B130 and do not update to B131 but install firmware finder and directly upgrade to B342. So it was your bad luck that you are facing this but as Omair said you can flash his file or just download the B130 for your device model and follow the dload instructions to give a new life to your device. God bless you.

talvigi said:
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you write its name and version above the link, Thanks.
Click to expand...
Click to collapse
Well your question is more correct now.. So here is the simple answer.
No need to go back to 130 ...I also upgraded from 131. See my first post and update using firmware finder but using the method send to updater see the setting of firmware finder as you will need to do some proxy setting.
For the second file question as I explained in a reply to another member its a second part flash file to upgrade to android 7. Only if you upgraded using dload method.
The file is for bln-l21c185.

talvigi said:
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you write its name and version above the link, Thanks.
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
@Tangra , It has been suggested by some guys on this thread https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 , that we should go back to B130 and do not update to B131 but install firmware finder and directly upgrade to B342. So it was your bad luck that you are facing this but as Omair said you can flash his file or just download the B130 for your device model and follow the dload instructions to give a new life to your device. God bless you.
Click to expand...
Click to collapse
@talvigi its a second part flash file you need to flash in order to get full functionality on android 7. This file is only needed if android 7 update is made using dload. This will also give your correct version in about and updater app. If update is made using firmware finder sent to updater method than this file is automatically downloaded and flashed in updating process. I got this file from the updater folder.

omair.anwer said:
Well your question is more correct now.. So here is the simple answer.
The file is for bln-l21c185.
Click to expand...
Click to collapse
Oh, no yaar, @Omair.anwar I have already formated my device this morning, because it was download the full update file send by firmware finder to my updater.
But i am still on B131, so according to you i should directly upgrade to B342 and i shouldn't go back to B130. BUT you said you had problems in B342 like no update options etc, may be this was just because you upgraded from B131?
@Omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? my number is zero three two double zero two six one double six zero. Thanks

talvigi said:
Oh, no yaar, @Omair.anwar I have already formated my device this morning, because it was download the full update file send by firmware finder to my updater.
But i am still on B131, so according to you i should directly upgrade to B342 and i shouldn't go back to B130. BUT you said you had problems in B342 like no update options etc, may be this was just because you upgraded from B131?
Click to expand...
Click to collapse
I am not sure.. it should work fine if you Will use firmware finder with "installation via system update" and "view OTA updates" in setting.
If you want make sure, then after updater had downloaded 100% go to internal storage there will be a folder named something like OUC and see in its sub folders there should be two files one named update.zip and another named like "update data full".
I had the problem because I flashed different version firmware.

omair.anwer said:
I am not sure.. it should work fine if you Will use firmware finder with "installation via system update" and "view OTA updates" in setting.
If you want make sure, then after updater had downloaded 100% go to internal storage there will be a folder named something like OUC and see in its sub folders there should be two files one named update.zip and another named like "update data full".
I had the problem because I flashed different version firmware.
Click to expand...
Click to collapse
@omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? Thanks

talvigi said:
@omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? my number is zero three two double zero two six one double six zero. Thanks
Click to expand...
Click to collapse
Exactly that is very imp. Full OTA.

omair.anwer said:
Exactly that is very imp. Full OTA.
Click to expand...
Click to collapse
Thanks man, thanks a lot.
I will inform you guys, what happen to me and my lovely Honor 6xxxxxxx

Hi ! i have one question
After RollBack package flashed can i flash directly BLN-L21C432B130 or i flash the BLN-L24 Before ?????
I have my answer i can't flash directly my french firmware ...
It's the brothel to return to Android 6.0 compared to nexus or samsung devices XD i like challenge
Rollback Package For BLN-L21 ?????? : http://www.hihonor.com/fr/support/software-list/index.html (no tested because i have flashed the rollback package of BLN-L24 .... too late for me )

omair.anwer said:
Well your question is more correct now.. So here is the simple answer.
No need to go back to 130 ...I also upgraded from 131. See my first post and update using firmware finder but using the method send to updater see the setting of firmware finder as you will need to do some proxy setting.
For the second file question as I explained in a reply to another member its a second part flash file to upgrade to android 7. Only if you upgraded using dload method.
The file is for bln-l21c185.
Click to expand...
Click to collapse
Thank you for the link. I unzipped "update_data_full_BLN-L21_hw_meafnaf.zip" and dropped the content in dload folder on SD card. Flashed from Engineering mode menu and everything on the phone works correctly now.
I was trying to locate this file "update_data_full_BLN-L21_hw_meafnaf.zip" by myself with no success. i'm curious how did you find it and is there a link for this file somewhere on hicloud servers. I see that for EU version off the phone this file is available for direct download from there.
Anyways, you did amazing job and your post will help many people I guess. Thank you!
P.S. I noticed after I posted my remarks that you've got "update_data_full_BLN-L21_hw_meafnaf.zip" from your Updater App folder - great job and hopefully somebody will find the link for direct download from hicloud servers

Renaf2 said:
Hi ! i have one question
After RollBack package flashed can i flash directly BLN-L21C432B130 or i flash the BLN-L24 Before ?????
I have my answer i can't flash directly my french firmware ...
It's the brothel to return to Android 6.0 compared to nexus or samsung devices XD i like challenge
Rollback Package For BLN-L21 ?????? : http://www.hihonor.com/fr/support/software-list/index.html (no tested because i have flashed the rollback package of BLN-L24 .... too late for me )
Click to expand...
Click to collapse
Hi if you flashed Bln-l24 roll back and it worked than you can still flash bln-l24 android 6 package and after that use the firmware finder with correct settings to get back to bln-l21.
See pic attached for settings and read my very first post too.
I hope I understood your concern well.

omair.anwer said:
Hi if you flashed Bln-l24 roll back and it worked than you can still flash bln-l24 android 6 package and after that use the firmware finder with correct settings to get back to bln-l21.
See pic attached for settings and read my very first post too.
I hope I understood your concern well.
Click to expand...
Click to collapse
Thank you very much but finally i resolved alone my problem
I'm now with my Stock Rom Debloated My Bank app convert to system app directly unrooted ... i'm ready when Nougat Final update is out
Can i relock my bootloader with this command prompt ? : fastboot oem relock "my 16 digit code" ???????? No can't relock bootloader with command prompt but if you reflash stock rom with update method you relock bootloader resolved

Old firmware?

Hi all. Today I purchased an Honor 6x. I am in the UK. The phone has been on all day and I have been tapping the update button like crazy. It seems that I am stuck on EMUI 4.1.3 and Android Marshmallow. Should there be a Nougat update in the UK for this phone? Thanks in advance

muppet2008 said:
Hi all. Today I purchased an Honor 6x. I am in the UK. The phone has been on all day and I have been tapping the update button like crazy. It seems that I am stuck on EMUI 4.1.3 and Android Marshmallow. Should there be a Nougat update in the UK for this phone? Thanks in advance
Click to expand...
Click to collapse
What's your build model?
Sent from my Honor 8 Pro using XDA Labs

Hi Adrian, I. Think this is it.
BLN-L21C432B151

muppet2008 said:
Hi Adrian, I. Think this is it.
BLN-L21C432B151
Click to expand...
Click to collapse
Have a look HERE, latest firmware is B366.
Sent from my Honor 8 Pro using XDA Labs

Ah thanks both. I've just had a look at that site and firmware finder. As there doesn't seem to be an OTA update heading my way I might give firmware finder a bash. Many thanks.

ahsan.mehar1 said:
U should try to upgrade via firmware finder app on play store its work 100% i also upgrade my 6x with this app
Click to expand...
Click to collapse
No, it doesn't work at 100%, often users detect problems of various types after using FF here on XDA, this because it can download even packages that not always match your phone variant...
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
muppet2008 said:
Ah thanks both. I've just had a look at that site and firmware finder. As there doesn't seem to be an OTA update heading my way I might give firmware finder a bash. Many thanks.
Click to expand...
Click to collapse
Updates should be already came out if I'm not wrong, try to force the update by clicking on system uodaye -> 3 dots on the upper right corner -> down latest update. If nothing is found, try to write to Huawei and ask about the most recent update for your build

I have sent Huawei an email requesting information with regards to an update. Obviously I'll get no reply being the weekend so I have been sat here looking at firmware finder. So close to using it. From what I understand it won't void the warranty of the phone if I update using firmware finder. What if the update doesn't work can I revert back to the original version. What if the update bricks the phone? Is that easy to fix?
TIA

ahsan.mehar1 said:
Bro its work 100% via FF application by proxy not manually. With FF application its detect ur build number and show u a valid roms
Click to expand...
Click to collapse
I saw too much times users having problem after that, i can't trust it yet man! (this is only MY opinion, to be clear)
muppet2008 said:
I have sent Huawei an email requesting information with regards to an update. Obviously I'll get no reply being the weekend so I have been sat here looking at firmware finder. So close to using it. From what I understand it won't void the warranty of the phone if I update using firmware finder. What if the update doesn't work can I revert back to the original version. What if the update bricks the phone? Is that easy to fix?
TIA
Click to expand...
Click to collapse
The rollback packages are available only for a limited amount of models at the moment (and i think forever, if Huawei wouldn't upload other packages as they've decided to do) so it could be a pain without a proper TWRP backup. For unbricking, there are some methods for doing that and it could be easy like it couldn't be, it just depends by the problem that could occur.

Ah thanks RedSkull. I might try and kerb my eagerness and see if I get a response from Huawei. This week's a bit busy so probably not the time to try anything risky.

i m not able to install stock recovery i m on twrp AND THERE IS NO OS IN MY PHONE
vendor and product partitions are completely empty
not able to boot at all not installing any rom zip as saying not able to mount vendor
how to flash vendor and product i tried with fastboot but it says remote command not allowed and tried installing stock recoery by fastboot and it installs successfully but when i boot recovery there is only twrp everytime
without stock i cant use dload method and stock is not installing and custom roms are also not installing

Hey guys.
after a download with firmware finder,I found this problem: ????
failed to authenticate installation passage.This package is unauthorized and will be deleted.Please download and install an authorized installation package.
Help me.my build number is b361 and I want to update to b380

Honor 8 FRD AL10 firmware need

Hello,
Please help
It notification that update system
After that I'm trying to update it and I face a big problem. Plz watch the attached image. Now when I try to start this phone, it show me this thing's.
I can't use my phone.
It's about one week I am trying to find the right firmaware for my phone honor 8 FRD - AL10.
can someone help me to download this one and to fix this phone
Thank you.

Nuurr15 said:
Hello,
Please help
It notification that update system
After that I'm trying to update it and I face a big problem. Plz watch the attached image. Now when I try to start this phone, it show me this thing's.
I can't use my phone.
It's about one week I am trying to find the right firmaware for my phone honor 8 FRD - AL10.
can someone help me to download this one and to fix this phone
Thank you.
Click to expand...
Click to collapse
Go Download Firmware Finder In Play Store And Find Your Model. Do NOT Download Firmware That Are Not Approved Yet Whrn Selecting A Firmware. You Could Update If You Stock Recovery With The DNS Thing When Selecting A Firmware. Do Not Update Your Device With The One That Are Like Less Than 1GB, You Should Update With One That Says Around 2-3 GB

SuperSwordSmasher said:
Go Download Firmware Finder In Play Store And Find Your Model. Do NOT Download Firmware That Are Not Approved Yet Whrn Selecting A Firmware. You Could Update If You Stock Recovery With The DNS Thing When Selecting A Firmware. Do Not Update Your Device With The One That Are Like Less Than 1GB, You Should Update With One That Says Around 2-3 GB
Click to expand...
Click to collapse
Firmware finder, it shows Alart "Sorry, we do not have any firmwares for this model at the moment."

Nuurr15 said:
Firmware finder, it shows Alart "Sorry, we do not have any firmwares for this model at the moment."
Click to expand...
Click to collapse
Put Down FRD-AL10 And Then Put Down Your Keyboard And Press "OK", It Will Pop Up
I Have FRD-AL10's Firmware List For Doing That

SuperSwordSmasher said:
Put Down FRD-AL10 And Then Put Down Your Keyboard And Press "OK", It Will Pop Up
I Have FRD-AL10's Firmware List For Doing That
Click to expand...
Click to collapse
Hello
plz help me to download stock firmware of Honor 8 FRD-AL10
And install process plz.

Nuurr15 said:
Hello
plz help me to download stock firmware of Honor 8 FRD-AL10
And install process plz.
Click to expand...
Click to collapse
Your Trying To Update Or Download Stock Firmware?

SuperSwordSmasher said:
Your Trying To Update Or Download Stock Firmware?
Click to expand...
Click to collapse
Stock firmware plz

Update issues after Downgrade

Hi all, I have downgraded my p40 pro to 131 to get google apps working. Then tried auto updates and it tells me that there is an update but same version 131, updated to 131 using auto update but it still keeps telling me that I'm on 131 and same version of update available. Connected to PC and use Hisuite and same story, tells me 131 update available (which I already have) and nothing else. Was able to update to 154 using proxy but now same story, it keeps telling me that 154 update available which I did auto update but I still get notification that I there is new update to 154. I cleared data and cache both for Huawei Core and Update app but still same story.
Please help!?!

You will need to use Hisuit Proxi & firmware finder to get more upto date firmware.

cmoss9946 said:
You will need to use Hisuit Proxi & firmware finder to get more upto date firmware.
Click to expand...
Click to collapse
hi, should I update it using FullOTA-MF or OTA-MF only? thanks

Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.

cmoss9946 said:
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
Click to expand...
Click to collapse
thanks, another question is, will it wipe off the phone?

When I did mine, No. But remove or backup any personal stuff off your memory card if you have one, just in case. Note if you've done the GMS install, make sure you log into All you're accounts, ie YouTube etc first before upgrading firmware. Cause you won't be able to add later.

cmoss9946 said:
Select Full, and use the check availability option to make sure its an approved for install as well, else it will fail.
Click to expand...
Click to collapse
Update: Ok found it, it is via the advance button and paste the link there to check if it's approved or not.
Is this done via the HiSuit Proxy Advance button? how can i check if it's approved or not?

Use firmware finder to check it's an approved version.

Hi im having the same problem. I tried to manually update to version 10.1.0.161 after installing gms from 121. Still cant get OTA. Its been 2 weeks.

iwan_chong said:
Hi im having the same problem. I tried to manually update to version 10.1.0.161 after installing gms from 121. Still cant get OTA. Its been 2 weeks.
Click to expand...
Click to collapse
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo

samlis said:
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
Click to expand...
Click to collapse
Thanks! I manage to get update to .172 but I checked with my other friends also p40 pro to be on .182. Any idea why?

iwan_chong said:
Thanks! I manage to get update to .172 but I checked with my other friends also p40 pro to be on .182. Any idea why?
Click to expand...
Click to collapse
Hi, Maybe different region or you don't have the same cust software version (C432 or c605 or C185)

samlis said:
Hi maybe it will help you
https://www.youtube.com/watch?v=Dc-trmzWsxo
Click to expand...
Click to collapse
Hmmm we are all on C636. No idea what went wrong. Only difference is 4RP1 and 5RP1. Any difference in those?

Same situation here, I downgrade to version 131 o install GSM and now the phone won't update.
I had to update it using HiSuite and now I'm on 183 version.
Hope there is a way to fix the OTA updates on the phone.

getting regular updates after installing GMS via googlefier

Doing some research I have found what is happening:
On your P40 Pro, in the "About phone" screen you can see the build number and then a number between ( ), example: Build number 10.1.0.131 (C636E8R5P1)
The number after the C will tell you the version or region of your firmware, in the example C636 = version/region 636
When you downgrade using a different version/region you will loose the OTA updates on the phone, and this will only be restored after you install your correct version/region firmware.
You will need to find the correct version of your firmware and have the "dload" version, and install it from external card. There is a video showing how to do this, but the link on the video is for a version/region 636, if you have a different version/region it won't fix anything.
Once you have the correct firmware and install it, you will begin receiving OTA again. This process, at least on my phone, erased everything, so be aware of this.

williegomezt said:
Doing some research I have found what is happening:
On your P40 Pro, in the "About phone" screen you can see the build number and then a number between ( ), example: Build number 10.1.0.131 (C636E8R5P1)
The number after the C will tell you the version or region of your firmware, in the example C636 = version/region 636
When you downgrade using a different version/region you will loose the OTA updates on the phone, and this will only be restored after you install your correct version/region firmware.
You will need to find the correct version of your firmware and have the "dload" version, and install it from external card. There is a video showing how to do this, but the link on the video is for a version/region 636, if you have a different version/region it won't fix anything.
Once you have the correct firmware and install it, you will begin receiving OTA again. This process, at least on my phone, erased everything, so be aware of this.
Click to expand...
Click to collapse
If c636 is version/region then what e8r5p1 is?

any ideas on how to update to the latest version manually without losing data? when i check for update it says im on latest, but im on .121!

My version is .176 c432 want to install gms so I still need to downgrade to .131 first? Also I saw most people are c636 what region is mine?

iwan_chong said:
Hmmm we are all on C636. No idea what went wrong. Only difference is 4RP1 and 5RP1. Any difference in those?
Click to expand...
Click to collapse
Same thing for me. Im afraid I'll lose my update ability forever lol

HiProxy Downgrade caused rebooting

Hi guys,
Happy new year to all of you.
So... My story :
I downgraded my ELS-NX9 via HiProxy , but i accidentally choose LGRP6 instead of LGRP4 and voila (10.1.0.136(C432E8R6P1)) - my phone was stuck on boot logo.
Then , somehow i managed to turn it on , but the side effects:
Restarting on every 30 seconds.
No IMEI
No Base software version
No Cust software version
eRecovery failed to get the package info
No sound.
What i've tried:
I've tried to put another software via OTG cable , i downloaded the software from Firmware Finder, but it's says that the update package has not been found.
Then i've downloaded another software with dload from Easy-Firmware (10.1.0.131(C432E8R6P1)). but it's says The version is incompatible with the current one.
Any ideas how can i fix this mess ?
Thanks and Regards,
Kris

If eRecovery isn't working I think you might need to visit the huawei store. To my understanding, eRecovery is the kirin version of Qualcomm download mode, aka your last line of defense.

krissko0o said:
Hi guys,
Happy new year to all of you.
So... My story :
I downgraded my ELS-NX9 via HiProxy , but i accidentally choose LGRP6 instead of LGRP4 and voila (10.1.0.136(C432E8R6P1)) - my phone was stuck on boot logo.
Then , somehow i managed to turn it on , but the side effects:
Restarting on every 30 seconds.
No IMEI
No Base software version
No Cust software version
eRecovery failed to get the package info
No sound.
What i've tried:
I've tried to put another software via OTG cable , i downloaded the software from Firmware Finder, but it's says that the update package has not been found.
Then i've downloaded another software with dload from Easy-Firmware (10.1.0.131(C432E8R6P1)). but it's says The version is incompatible with the current one.
Any ideas how can i fix this mess ?
Thanks and Regards,
Kris
Click to expand...
Click to collapse
Inside of dload folder do you have update_sd_base.zip + ELS-N29_hw_eu folder ?
dload
+ update_sd_base.zip
+ ELS-N29_hw_eu
++ update_sd_cust_ELS-N29_hw_eu.zip
++ update_sd_preload_ELS-N29_hw_eu_R6.zip

unfortunately it's not working , when i try to update via eRecovery it's saying ""
kilroystyx said:
Inside of dload folder do you have update_sd_base.zip + ELS-N29_hw_eu folder ?
dload
+ update_sd_base.zip
+ ELS-N29_hw_eu
++ update_sd_cust_ELS-N29_hw_eu.zip
++ update_sd_preload_ELS-N29_hw_eu_R6.zip
Click to expand...
Click to collapse
Yes

krissko0o said:
Yes
Click to expand...
Click to collapse
I though you downloaded firmware for C432 location (hw/eu) but according your prints was for C185 (hw/meafnaf)
Your device is C432 or C185?

kilroystyx said:
I though you downloaded firmware for C432 location (hw/eu) but according your prints was for C185 (hw/meafnaf)
Your device is C432 or C185?
Click to expand...
Click to collapse
That's the point mate , the current firmware is C432 but when i try to install C432 i'm receiving error incompatibility with the current version

Similar issue with me.Any one can help me on that

wut_tah said:
Similar issue with me.Any one can help me on that
Click to expand...
Click to collapse
I'm trying another firmware now and if it's not working i'm sending my phone for repair , it seems that's the only way, as basically my phone does not have Cust version and Base version which is the most important thing when you are updating , as the update package is checking first if the Base and Cust version are similar to the ones from the update package.

krissko0o said:
I'm trying another firmware now and if it's not working i'm sending my phone for repair , it seems that's the only way, as basically my phone does not have Cust version and Base version which is the most important thing when you are updating , as the update package is checking first if the Base and Cust version are similar to the ones from the update package.
Click to expand...
Click to collapse
Thank a lot Shock!!!!