Database Info

[KERNEL][GPL][ACS]Xtreme Kernel v1.2.0-Lucy-1.3GHz OC,Battery,Tweaked Voodoo(options)

ANDROID CREATIVE SYNDICATE​presents​XTREME KERNEL V1.2.0​
First of all, I want to put my thank yous up here at the top, so, here they are:
-geniusdog254 - My primary teammate, been helping me every step of way.
-nullghost - One really cool dude. Always on when I ask for help. Git would still be a scary thing if not for him.
-rjmjr69 - Funny, funny dude. Keeps me motivated to keep going
-The Voodoo Team - Your work is awesome!
-My beta testers - You were/are all great. Thanks for helping me with this!
-All the devs across the board - Seriously, you're all a bunch of absolutely awesome people.
-Anyone I forgot - You're all great!
Now, here we go:
THE STANDARD DISCLAIMER
I, DevinXtreme, AM NOT responsible for what happens to your phone, your cat, your house, or anything relating to you! If your phone bricks, OH WELL. Have a nice day.
This kernel has a MixUp kernel base. DI18, blah blah. I deviated once Interactive got working. I also removed the Voodoo color modification. So, there's that.
It is built and designed for Syndicate ROM, which will be out later tonight. Sickest ROM you've ever seen. The version released with the ROM is slightly different, but only for fun's sake
Changelog:
v1.2.0
-Removed the 1.6GHz step. The time machine is gone. Plus, was causing more problems than it was helping.
-Added 1.3GHz step courtesy Herver
-Switched from MPLL to APLL. Smoothness and speed increase. Thanks to nullghost for help on this.
-Added Voodoo color mod, tweaked version, courtesy Herver. I will be maintaining a no-voodoo version. I just haven't yet.
-Tweaked the light sensor, adding a new step and made it not jump to the brightest setting as much. Should save battery and transition smoother. Also pols a little more often.
-Tweaked scaling rules for 1.3GHz. Should scale there less, thus saving battery.
ADDITION: The file ending in 'nv.zip' is a no-voodoo version. The file ending in 'ov.zip' is the version for the original voodoo mod, not the tweaked one.
v1.0.1
-Fixed scaling. Linpack scores and tests work fine now.
-Disabled Carrier IQ in init.rc. Carrier IQ is essentially Sprint spyware. Kernel devs: This is really easy to do. Just comment out the iqmsd lines at the end.
v1.0
-Overclock to 1.6GHz!! Requires SetCPU which is, for some reason, defaulting to performance. Make sure you change it to conservative.
-Default governor without SetCPU is conservative with 200MHz-1GHz steps.
-Removed Voodoo
-Framerate unlocked (78-80fps)
-Built for ROMs with a custom boot. Makes stock boot look like garbage. We're working (still) to fix this.
-Undervolted
KNOWN BUGS:
-In spare parts, if you set the WiFi policy to never sleep, it still sleeps with the screen off. -skandranon314
-Some weird vibration thing going on when 1.6GHz is hit.
NOTES:
Linpack is being strange with this. I'm getting between 9.2 and 9.8 with some REALLY strange numbers. I'll have this fixed this weekend.
SetCPU sets the default governor to performance. If you use it, be sure to change it immediately for battery life.
FOR 1.2
-I recommend 200MHz-1200MHz. Some phones can't reach 1.3GHz safely.
-200MHz - 800/1000MHz is a great setting for battery and you should still have a very smooth experience.
For those who care, I get 1135+ in quadrant.
You can read my source here.
Thanks, guys. I hope you enjoy!

How stable is this??

When is the rom out?
Sent from my SPH-D700 using XDA App

Looking forward to trying this out!

1.6 GHz???????
That's awesome, though I don't think I'll crank it that high.
Is there any advantage to this vs MixUp running at 1.0 Ghz?

spitefulrain said:
How stable is this??
Click to expand...
Click to collapse
I've hit no bumps, neither have my testers.
joshottley said:
When is the rom out?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Give it a couple of hours.
SORRY, HAD TO TAKE IT DOWN FOR JUST A LITTLE BIT. EXPECT AT ~12:45AM MST.

Why take it down? I already downloaded and flashed, was that a bad idea??

I'm running it. Smooth so far.
Sent from my SPH-D700 using XDA App

Dusting the epic off now.

[email protected] said:
Dusting the epic off now.
Click to expand...
Click to collapse
Should have never abandoned dude lol.
Sent from my SPH-D700 using XDA App

Very smooth so far. got 1194 on quad, and 9.2 average on linpack. Wonder how the battery life will fare.

spitefulrain said:
Why take it down? I already downloaded and flashed, was that a bad idea??
Click to expand...
Click to collapse
Nope, just a tweak. Your phone is fine! XD
And I'll be in a movie, so I won't be able to get it up until then. Sorry guys!

DevinXtreme said:
Nope, just a tweak. Your phone is fine! XD
And I'll be in a movie, so I won't be able to get it up until then. Sorry guys!
Click to expand...
Click to collapse
Ok, good. I was worried for a sec
So would you recommend flashing the new one when it's up since you're tweaking it?

Hmm.. something's not right here. I just got 22 fps in Neocore with the removed kernel. What could I be doing wrong?
Edit: Switching from performance to conservative upped my results to 62 fps which is quite respectable.

spitefulrain said:
Ok, good. I was worried for a sec
So would you recommend flashing the new one when it's up since you're tweaking it?
Click to expand...
Click to collapse
Yeah, it'll be a good idea.

what kind of voltage are you giving it to get 1.6 stable? based on what im reading, anything above 1.3/1.4 is pretty much unachievable on these devices and is not really the speed that the device is running thus the unscaled rise in benchmark scores. iv been following hero_over and he couldnt get a stable 1.4 OC although he did get 1.3ghz on stock volts stable..which keeps me wondering if we really can hit 1.6 stable

illogic6 said:
Hmm.. something's not right here. I just got 22 fps in Neocore with the removed kernel. What could I be doing wrong?
Edit: Switching from performance to conservative upped my results to 62 fps which is quite respectable.
Click to expand...
Click to collapse
lol I was gonna say. I'm going good with Neocore as well.
d94 said:
what kind of voltage are you giving it to get 1.6 stable? based on what im reading, anything above 1.3/1.4 is pretty much unachievable on these devices and is not really the speed that the device is running thus the unscaled rise in benchmark scores. iv been following hero_over and he couldnt get a stable 1.4 OC although he did get 1.3ghz on stock volts stable..which keeps me wondering if we really can hit 1.6 stable
Click to expand...
Click to collapse
All of it is on my git. I release my source, as devs should with GPL. The problem is that the fsb isn't scaled properly, affecting the floating point processor, causing low Linpack scores. I'll have it worked out this weekend,

Bummer.... I missed the link the first go around..... Will be waiting
Sent from my SPH-D700 using XDA App

If this was a hero_over post, he'd be in trouble for a teaser post lol... just trolling lol. Had to have a smart ass comment

Quick. And stable so far
Sent from my SPH-D700 using XDA App

[KERNEL][GPL]VisionKernel v1.3 *WIP*

VisionKernel v1.2
Designed for SyndicateROM Frozen 1.1.0​
Disclaimer
I nor any member of INC is responsible for anything that happens to your phone when using this kernel. It has been tested on mine and a few others phones to be working, but I cannot guarantee that it will work on yours. All CPU's are different, and each one takes to overclocking in different ways. That being said, don't be surprised if your phone locks up at 1.4ghz or 1.45ghz. Just set the clock down to a lower speed and it won't do it anymore; all this means is that your phone can't handle it.
Also, 1.45ghz is set at 1.400v and 1.4ghz is set at 1.375v which is definitely above the recommended voltage for the phone. This doesn't mean it will burn up your processor as they are very robust when it comes to heat dissipation, but just keep in mind that you are pushing the processor past its designed limit.
This is my first kernel release, although I have been compiling my own custom kernels since DI18. Took me a while to get the overclocking stable, a big thanks goes to tanimn and Rodderik for helping with getting 1.3ghz stable. Also, without tanimn none of this would really be possible. He has guided me through this process a lot, and I am especially thankful to him. You the man tanimn ;-)
1.45ghz is here, I cannot guarantee that it will work even at all on your phone. This is as high as I will go, no further.
Linpack: 19.84mflops
Quadrant: 2414
Changelog
*=Thanks!
v1.0
Overclocked to 1.3ghz and 1.4ghz @ 1.375v (steps are as follows)
100mhz, 200mhz, 400mhz, 600mhz, 800mhz, 1.0ghz, 1.3ghz, 1.4ghz
Added 600mhz step for better transitions *tanimn
Voodoo Sound v6 *tanimn and supercurio
Voodoo Color (mDNIe tweaks) *supercurio
FPS cap raised to 65fps for the time being, hoping to get that number higher *Rodderik
Everything else that is contained in Twilight Zone, minus the addition of voodoo color and 1.4ghz.
v1.1
Revert the refresh rate (framerate cap) to 56fps. People having problems with video choppiness, this should fix your issue. This is only temporary; as soon as someone can figure out a proper way to raise the framerate cap I will re-implement it.
Update to Voodoo Sound driver v7
v1.2
Add 1.45ghz (It's not 100% stable, use at your own risk.)
Add 1.2ghz step
Added BFQ disk scheduler
Implemented interactive CPU governor (use at your own risk, needs tweaking)
Smartass governor (still a WIP)
Add TinyRCU courtesy of tanimn
lowmemorykiller atomic notifier fixes
UV RAM and LCD; 2.7v and 1.65v respectively
UV_mV sysfs controls as well as frequency_voltage_table for use with Voltage Control and Pimp my CPU *Rodderik
New voltage/frequency tables thanks to Rodderik!
v1.3
Battery life improvement tweaks
BFQ by default
New frequencies
More...
How-to Video:
Thanks to qbking77 for making this excellent flashing tutorial! This will show you exactly how to get the kernel running on your phone.
http://www.youtube.com/watch?v=1k7hqewGoWk
*Downloads*
v1.2
Direct:
Temporarily removed.
v1.1
Direct:
www.holylivingfuck.com/ACS/Kernals/VisionKernel_v1.1.zip
More mirrors coming soon!
v1.0
Direct:
http://k0nane.info/rom/VisionKernel_v1.0.zip
Other:
http://www.mediafire.com/?tihrnrjm6cm177u
http://www.sharebeast.com/7egv5a83g9ab
*Source*
Github
Donations are never required, but always welcome
​

Donators:
darkfire79
epic4GEE
jbobspants
stir fry a lot

Alright, I'm swapping the twilight zone kernal for this. Thanks for an amazing job once again.

EDIT: Damned conversion from all caps.
ONE POINT FOUR JIGGAWATTS!
ACS FTW.

Great job Thomas. I'm one of those who can't push the processor past 1.2g. Despite that I have had the privilege of testing pretty much all of the Twilight kernels courtasey of Tanimn as well as the Vision kernel. Both are great kernels, and run smooth on my Epic as long as I don't push it to the highest clock. Never had a reboot or lock up pushing my phone with these kernels. Once gain thanks Thomas, I know how much time and energy you go into this kernel and it shows!

dreamsforgotten said:
Great job Thomas. I'm one of those who can't push the processor past 1.2g. Despite that I have had the privilege of testing pretty much all of the Twilight kernels courtasey of Tanimn as well as the Vision kernel. Both are great kernels, and run smooth on my Epic as long as I don't push it to the highest clock. Never had a reboot or lock up pushing my phone with these kernels. Once gain thanks Thomas, I know how much time and energy you go into this kernel and it shows!
Click to expand...
Click to collapse
You the man dreams, much appreciated my friend thank you!
Sent from my SPH-D700 using XDA App

OMGGGGGGG
Thank you !!!!!!!!!
..... So fast that Smartbench force closes

I'll try this in a few days, assuming my phone can handle 1.3 jigga hurtz first. Sure sounds good tho, thanks, I'll report back in a few days.

How is everyone's battery doing running this kernel?

nice I just downloaded this and about to set everything up. Thanks!!

Yea buddy....
Wheres me and dreams name in big red letters for pushing you to release this
Sent from my SPH-D700 using Tapatalk

can this be flashed on eb13?

MysteryEmotionz said:
Yea buddy....
Wheres me and dreams name in big red letters for pushing you to release this
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
If Tom is smart, he'll tell you the same thing I did: ***** please.
blspyro said:
can this be flashed on eb13?
Click to expand...
Click to collapse
Yes.

Ran a quadrant at 1.4 ghz running ViperROM Trinity
Clocked a 1765 with this kernel
Clocked a 1724 with Genocide 0.5a at 1.2 ghz. Not too much difference there. Any thoughts? Still testing battery life with this one as that's a hugs issue for me.

MikeyLee said:
Ran a quadrant at 1.4 ghz running ViperROM Trinity
Clocked a 1765 with this kernel
Clocked a 1724 with Genocide 0.5a at 1.2 ghz. Not too much difference there. Any thoughts? Still testing battery life with this one as that's a hugs issue for me.
Click to expand...
Click to collapse
Long story short: Quadrant sucks. Try a better benchmark.

k0nane said:
Long story short: Quadrant sucks. Try a better benchmark.
Click to expand...
Click to collapse
Any suggestions?

MikeyLee said:
Ran a quadrant at 1.4 ghz running ViperROM Trinity
Clocked a 1765 with this kernel
Clocked a 1724 with Genocide 0.5a at 1.2 ghz. Not too much difference there. Any thoughts? Still testing battery life with this one as that's a hugs issue for me.
Click to expand...
Click to collapse
Also you will get higher scores when you get off that old ass rom with old files and source. So like 4 months ago. Smartbench is good
Sent from my SPH-D700 using XDA App

How are you suppose to test stability of oc for your phone in setcpu? I ran the stress test at 1.3ghz with no errors was there other tests to confirm stability?
Sent from my SPH-D700 using XDA App

jbadboy2007 said:
How are you suppose to test stability of oc for your phone in setcpu? I ran the stress test at 1.3ghz with no errors was there other tests to confirm stability?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Try running something CPU intensive, such as Neocore or an3dbench.
Sent from my SPH-D700 using XDA App

And its resluts will tell me its unstable or will it be laggy or fc or re boot?
Sent from my SPH-D700 using XDA App

[KERNEL/GPL/Sense]ScaryKernel 1.8 super uv/oc/uc/smartass/scary governor/bfq

PaulB007 said:
If you haven't been able to get past the HTC screen at boot and keep bootlooping, YOU MUST INSTALL BC'S 1.5 GHZ KERNEL FIRST AND THEN FLASH THESE KERNELS OVER THAT I also just flashed it straight off of a new Mikshift install and I got the bootloop until I did this. So if you guys didn't do this, then install bc's kernel and flash Scary kernel again.
Scaryghoul, I have installed your 1.8 suv successfully on Mikshift. This is great news. I knew it would work, but for some reason I just cant get it running on aosp. I will keep you updated on IRC or through this thread, I haven't seen you on today yet.
Click to expand...
Click to collapse
Link to bcnice20's 1.5ghz kernel: http://forum.xda-developers.com/showthread.php?t=941728
If that doesn't work, try flashing over his 1.8ghz kernel(This is what worked for me, bcnice, if you want me to take down this link just let me know.) - http://thebcblends.com/shift/kernels/Sense-1.8ghz-bfq-test1.zip
Table of contents:
Intro
Features/what this includes
Why it's labeled unstable
Disclaimer
Latest kernels
Instructions for using swap
Governor exlainations
Governor strategies
Recommended apps
Locating cpu% Eaters && other negative items towards battery life
FAQ!
Changelog
Stable/safe voltage kernels
Notes
Source
Credits
Intro: I'm scaryghoul.
What this includes
Swap
BFQ I/o scheduler
Extreme undervolt
Overclocked & underclocked values
HW3D enabled
Sleepers disabled
Smartass governor
New Scary governor!
Tweaked conservative governor
and much more(All of bcnice20's kernel)
Why it's labeled unstable: So I don't get people poking me in the eyes with spoons if/when it freezes up. It actually works quite well, but since I heavily undervolted an undervolted kernel, it is bound to not be 100% stable(It is about 90% stable =P)
Disclaimer: What everyone else puts in kernel threads, about me not being responsible, ect.
Latest kernels
The voltages of the superUV will not work for everyone, if they don't work for you, then try the builds labeled stable
Recommended speeds 245-800mhz or 245-1ghz on scary governor && no setcpu profiles
Scarykernel 1.8 suv - http://dl.dropbox.com/u/15373824/Sense/ScarySense1.8Suv.zip
Scarykernel 1.8 stable undervolt - http://dl.dropbox.com/u/15373824/Sense/ScarySense1.8Stable.zip
Instructions for using swap
For a swapfile do something like this.
dd if=/dev/zero of=$Swapfile bs=1048576 count=$Size
Where $Swapfile is the location of the file you want, and $Size is the amount of mb for swap you want to use.
Then type
mkswap $Path
swapon $Path
Replacing $Path/$Size with your own values of course, so if I wanted 20mb of swap I'd execute the commands
dd if=/dev/zero of=/sdcard/swapfile bs=1048576 count=20
mkswap /sdcard/swapfile
swapon /sdcard/swapfile
Governor exlainations
Toasty makes one transition to the max speed and stays there(benchmarks only usually)
Batterysave! sits at the bottom and when the cpu load increases past the threshhold it scales up to the next speed and takes another load sample and keeps doing that(best on battery life/performance ratio)
Ondemand sits at the bottom and when the cpu load increases past the threshhold, it scales ot the max speed then takes another load sample and scales down accordingly
Powersave makes one transition to the bottom speed and stays there
Smartass(Quoted from another author http://www.ziggy471.com/2010/11/07/smartass-governor-info ) - "is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works – by taking over the idle loop – is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the “old” minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 352Mhz (or if your min frequency is higher than 352 – why?! – it will cap it to your min frequency). Lets take for example the 528/176 kernel, it will sleep at 352/176. No need for sleep profiles any more!"
Scary - A new governor I wrote based on conservative with some smartass features, it scales accordingly to conservatives laws. So it will start from the bottom, take a load sample, if it's above the upthreshold, ramp up only one speed at a time, and ramp down one at a time. It will automatically cap the off screen speeds to 245Mhz, and if your min freq is higher than 245mhz, it will reset the min to 120mhz while screen is off and restore it upon screen awakening, and still scale accordingly to conservatives laws. So it spends most of its time at lower frequencies. The goal of this is to get the best battery life with decent performance. It will give the same performance as conservative right now, it will get tweaked over time.
Governor strategies
Conservative - Upthreshold 85, downthreshold 60
Smartass - Sleep max 245760Hz, Ramp up at 384000Hz at a time, up threshold 90, downthreshold 60
Scary - Upthreshold 80, down threshold 45, sleep max 245760Hz, sleep min, 122880Hz
Recommended apps =)
Zdbox - Great toolbox app, just don't let it run in your notifications bar, it's a cpu eater
Setcpu/Nofrills - Apps that help manage your cpu/profiles/ect.(I don't use them but they're pretty okay)
Perfect system or Elixer widgets - Widgets that monitor battery, current, cpu%, cpu speed, and more(Great for battery guru's)
Adw ex - Smoothest/fasted/lightest ratio in a launcher I've seen so far, and least cpu intensive(for me that's a big thing so the cpu scales less)
Colorize widgets - Great widgets to replace the lpp ones for those converting to other launchers.
AppMonster(pro or free) - Great backup utility, automatically backs up all apps.(I like it better than TB)
GPS Status - Great application for finding satalites near you and helping get a quick lock.
Any go dev team app - Great dev team, all their apps are worth looking at.
Frequently asked questions
Question: My phone is boot looping/not booting on the released suv, what do I do?
Answer: Your phone cannot handle the super undervolted values, you will need to flash the stable undervolted kernel
Question: My phone is running slow on the batterysave or scary governors, what do I do?
Answer: Set your minimum speed higher, those governors spend a lot of time at the lowest values
Question: How do I flash this?
Answer: You probably shouldn't be flashing one of my kernels if you don't know how(Mine are unstable =P)
Question: I'm not getting the amazing battery life/benchmark scores that others are getting
Answer: Well, every device is different, so you may not be able to score as high as some others, but you should get close at least, and the battery completely depends on usage patterns
Question: My phone can't clock to 1.8ghz, or some of the other higher values but does fine on the lower ones
Answer: Every device is different and not all can handle the same speeds/voltages, you are probably better off staying away from the higher speeds, I enabled the speeds but hope that you all are mature enough to handle them
Locating cpu% eating applications.
When in ADB shell type the following
top |grep app
Then look for items with high amounts of cpu% while the phone is idle.

Changelog
v1.8 - Initial kernel release for sense
Safe voltage kernels
v1.8
Scarykernel 1.8 stable - http://dl.dropbox.com/u/15373824/Sense/ScarySense1.8Stable.zip
Notes:
No I can't take the overclock any higher, I think everyone who's had a chance to take a crack at this source has tried, and going any higher seizes up after a few seconds.
Here is the source code for this build. I'll try to maintain it, I have a lot of kernel sources, but this will always be the latest release code, unless I state otherwise.
https://github.com/Scaryghoul
Credits: bcnice20 - For 99.8% of his kernel source.
Dogejcr/Preludedrew - For helping me get my laptop setup for kernel compiling.
Testers - For flashing this even though it says unstable :-X
JoesephMother - For helping me unlock the new lower clock values && other kernel related matters =)
x99percent - I used his middle clock speeds between the 3xx->7xx values as a base(edited voltages) as well as used his smartass source.

I see nobody else has chimed in on this kernel yet.. I will install Mikshift tomorrow and report my findings.

Bummer, my phone is a wuss! I can't boot either one of these. Just sits on white screen. They look cool as hell though.
Sent from my PG06100 using Tapatalk

Yeah both versions don't work on mine.

If you haven't been able to get past the HTC screen at boot and keep bootlooping, YOU MUST INSTALL BC'S 1.5 GHZ KERNEL FIRST AND THEN FLASH THESE KERNELS OVER THAT I also just flashed it straight off of a new Mikshift install and I got the bootloop until I did this. So if you guys didn't do this, then install bc's kernel and flash Scary kernel again.
Scaryghoul, I have installed your 1.8 suv successfully on Mikshift. This is great news. I knew it would work, but for some reason I just cant get it running on aosp. I will keep you updated on IRC or through this thread, I haven't seen you on today yet.

Tried going strait from BC's still no go.
Sent from my PG06100 using Tapatalk

ozzie1p said:
Bummer, my phone is a wuss! I can't boot either one of these. Just sits on white screen. They look cool as hell though.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Did you flash over bcnice20's kernel?
PaulB007 said:
If you haven't been able to get past the HTC screen at boot and keep bootlooping, YOU MUST INSTALL BC'S 1.5 GHZ KERNEL FIRST AND THEN FLASH THESE KERNELS OVER THAT I also just flashed it straight off of a new Mikshift install and I got the bootloop until I did this. So if you guys didn't do this, then install bc's kernel and flash Scary kernel again.
Scaryghoul, I have installed your 1.8 suv successfully on Mikshift. This is great news. I knew it would work, but for some reason I just cant get it running on aosp. I will keep you updated on IRC or through this thread, I haven't seen you on today yet.
Click to expand...
Click to collapse
Thanks for clarifying that, I took down the links until we can get this working on several devices.
ozzie1p said:
Tried going strait from BC's still no go.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Did you try both of them over bcnice20's 1.5ghz? Not everyone can handle the suv one.
edit: Links back up! I need some testers to try the fix at the top.

Ya, I flashed right over the top of bc's. Ill try these new ones.
Sent from my PG06100 using Tapatalk

Scaryghoul are the reposted links any different than the old kernels you had up the first time? If not, the suv build would boot and run, but after using the phone after awhile for cpu intensive tasks it would lock up and require a battery pull. Im wondering if just a tiny bit more voltage would solve this problem.
On the stable build, it would run a minute or so and always lock up and require a battery pull..

PaulB007 said:
Scaryghoul are the reposted links any different than the old kernels you had up the first time? If not, the suv build would boot and run, but after using the phone after awhile for cpu intensive tasks it would lock up and require a battery pull. Im wondering if just a tiny bit more voltage would solve this problem.
On the stable build, it would run a minute or so and always lock up and require a battery pull..
Click to expand...
Click to collapse
Same links....and I see. If the stable build has the same issue as the suv, then it's not the voltage >.<

Oops. Thought they were new. At least I got the flash bug scratched. Flashed over both bc 1.5 and 1.8, no go.
Sent from my PG06100 using Tapatalk

Scaryghoul said:
Same links....and I see. If the stable build has the same issue as the suv, then it's not the voltage >.<
Click to expand...
Click to collapse
Whats the suspected culprit?

ozzie1p said:
Oops. Thought they were new. At least I got the flash bug scratched. Flashed over both bc 1.5 and 1.8, no go.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
PaulB007 said:
Whats the suspected culprit?
Click to expand...
Click to collapse
I don't know so much for the freezes, but I believe that the booting has to do with me using my old voltages, and sense handling things differently than aosp >.<
I'll redo the voltage table later.

Just Wondering?
When Source Code is released will you make a suv kernel for the Gingerbread Update i loved it on froyo and mikshift and gave great battery life.

notsointeresting said:
Just Wondering?
When Source Code is released will you make a suv kernel for the Gingerbread Update i loved it on froyo and mikshift and gave great battery life.
Click to expand...
Click to collapse
The source code isn't actually the issue right now. Lack of motivation mainly, I would consider it more if I hadn't deleted my toolchain from my dev station, can't be bothered to get another one setup right now.
When I get motivated again I will, I honestly don't use my phone much anymore(maybe pick it up once or twice a day).

Scaryghoul said:
The source code isn't actually the issue right now. Lack of motivation mainly, I would consider it more if I hadn't deleted my toolchain from my dev station, can't be bothered to get another one setup right now.
When I get motivated again I will, I honestly don't use my phone much anymore(maybe pick it up once or twice a day).
Click to expand...
Click to collapse
Ah ok that sucks was really hoping for it but I understand thanks for the fast reply

Scaryghoul said:
The source code isn't actually the issue right now. Lack of motivation mainly, I would consider it more if I hadn't deleted my toolchain from my dev station, can't be bothered to get another one setup right now.
When I get motivated again I will, I honestly don't use my phone much anymore(maybe pick it up once or twice a day).
Click to expand...
Click to collapse
The ndk from google's web site has the toolchains needed to build gb kernel in it. The dl isn't terribly huge.
Sent from my PG06100 using XDA Premium App

[Discussion][Q/A][INFO][25.6.12]Governers,OC,UC,I/O Schedulers,Kernel

So basically this is a general discussion or chit chatting for all of you about which governer is better ,best etc. I/O schedulers etc.
You can also ask question, queries about your current settings is it good and etc.
There are also three sections in this post too. Recommended settings by me, Tested ones. And also ones that I am testing. Those that I have tested have my remarks on them too
RECOMMENDED
Here are my recommended No-Frills CPU settings:
Max:1200
Min:300
Gov. InteractiveX(Gives a lot of performance boost and also battery friendly)
I/O: BFQ(Im now checking out other IO schedulers after found a good or better one i will update )(and also Because it fixes this issue.)
These are the setting that gives me the best/positive results on my unit. I do not OC as I see no obvious differences in speed as these settings are already more than good enough. And furthermore OC will decrease the life of the device so no point.
TESTED
I have tested these:
Max:1200
Min: 300
Gov: Smartassv2
IO: SIO
Remarks: I have tested these and I must say the performance and battery life was almost as good as those of the recommended settings These do perform almost the same as the recommended ones but battery wise is definitely an out for these if compared to the recommended one. I personally would still recommend and prefer those in the recommended section as both almost perform the same and this is more unbattery friendly.
TESTING
This are the settings that I am testing now:
Max: 1000
Min: 300
Gov: Conservative
IO: Noop
Remarks: So as usual, I will test and report back after about a week. As of now, performance wise, these really lose out to all the others that are present in this post. But battery wise its definitely a clear winner
SHORT VIDEO THAT I FOUND ON YOUTUBE
As usual, DO ANY CHANGES TO YOUR PHONE AT YOUR OWN RISK
Enjoy! And I hope that this thread has been helpful for you.

Reference: http://forum.xda-developers.com/showthread.php?t=1242323. Also, I believe many threads like this have been made . To me, everyone's experience is not entirely the same, therefore this would only help to a certain extend .
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!

bscraze said:
Reference: http://forum.xda-developers.com/showthread.php?t=1242323. Also, I believe many threads like this have been made . To me, everyone's experience is not entirely the same, therefore this would only help to a certain extend .
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
Click to expand...
Click to collapse
Hmmm... havent really seen one around in I9003 forums tho. And seen alot of discussion about this in dev thread so...

crazbanditz said:
Hmmm... havent really seen one around in I9003 forums tho. And seen alot of discussion about this in dev thread so...
Click to expand...
Click to collapse
Just Google 'best governor'/best scheduler/best governor and scheduler.
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!

first i have to say that there are big differences in CPU-Tools... i got myself cpumaster,nofrills and finally setcpu... cpumaster made my phone laggy even with lionheartgovernors and stuff...nofrills has no support for different profiles...so i highly recommend invest the little mlney for the incredible setcpu. basically i use smartassV2 at 1000mhz min 300mhz with sio scheduler...and then much profiles like change to vr scheduler when playing videos or in call 600mhz max or at night when i sleel keep the phone at 300mhz max; )
Sent from my GT-I9003 using XDA

Hi. I was just wondering... Do Kernel Govs and I/O selections match well with V6 Supercharger? Or is it better to supercharge with a stock kernel?
Sorry for the noob question. Im just concerned if its possible that all these mods im applying might be cancelling out each other at some point... Or worse might be contradicting each other too...
Sent from my Galaxy SL with CM9A6, Vurrut Kernel v17 & V6 Supercharged.

hpog said:
Hi. I was just wondering... Do Kernel Govs and I/O selections match well with V6 Supercharger? Or is it better to supercharge with a stock kernel?
Sorry for the noob question. Im just concerned if its possible that all these mods im applying might be cancelling out each other at some point... Or worse might be contradicting each other too...
Sent from my Galaxy SL with CM9A6, Vurrut Kernel v17 & V6 Supercharged.
Click to expand...
Click to collapse
Nope they don't they do different things . Supercharger manages minfree values while governors and schedulers manage the CPU speed
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!

felixchris said:
first i have to say that there are big differences in CPU-Tools... i got myself cpumaster,nofrills and finally setcpu... cpumaster made my phone laggy even with lionheartgovernors and stuff...nofrills has no support for different profiles...so i highly recommend invest the little mlney for the incredible setcpu. basically i use smartassV2 at 1000mhz min 300mhz with sio scheduler...and then much profiles like change to vr scheduler when playing videos or in call 600mhz max or at night when i sleel keep the phone at 300mhz max; )
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Umm smart ass v2 has built in screen off profiles if I'm not wrong.
Cheers
Sent from my GT-i9003 powered by RemICS S III-looking rom!

bscraze said:
Umm smart ass v2 has built in screen off profiles if I'm not wrong.
Cheers
Sent from my GT-i9003 powered by RemICS S III-looking rom!
Click to expand...
Click to collapse
It does

Updated op with testing status

Does oc to 1.1 ghz drains the same amount of battery as oc to 1.3ghz ?? Can i use screen off profile in set cpu with conservative 300 mhz max and 300 mhz min ?? will it drain battery or improve battery ???

anuraagkochar said:
Does oc to 1.1 ghz drains the same amount of battery as oc to 1.3ghz ?? Can i use screen off profile in set cpu with conservative 300 mhz max and 300 mhz min ?? will it drain battery or improve battery ???
Click to expand...
Click to collapse
This is my recommendation for SetCPU max 1200 min 300 gov interactiveX io:BFQ When asleep profile: Max 600 min 300 gov and io same as above
Press thanks if this helped

Updated OP with alot of changes Including the new section guide and also the tested section as well as remarks to help people with choosing their settings

Gv smartassv2 Io sio
Sent from my GT-I9003 using Tapatalk

juanra88 said:
Gv smartassv2 Io sio
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Ermmmm... Sorry why are you saying that all of a suddden?
Press Thanks if I helped

In my opinion, this topic is kinda useless.
I know and i respect your effort, but these settings really depend on the user and how they use the device.
If i try the same settings and try it myself, i will probably have another opinion and other results.
Benchmarks mean nothing.
Also many other threads all over XDA were made to explain governors and I/O schedulers, and users can simply Google it and read, then chose what suits them.

Skander1998 said:
In my opinion, this topic is kinda useless.
I know and i respect your effort, but these settings really depend on the user and how they use the device.
If i try the same settings and try it myself, i will probably have another opinion and other results.
Benchmarks mean nothing.
Also many other threads all over XDA were made to explain governors and I/O schedulers, and users can simply Google it and read, then chose what suits them.
Click to expand...
Click to collapse
Yea... but this is particularly for our device and I did do a remarks section to what is better for performance and battery. So that the user will better know which one suits them I didnt mention anything about benchmarks... right?
Press Thanks if I helped

crazbanditz said:
Yea... but this is particularly for our device and I did do a remarks section to what is better for performance and battery. So that the user will better know which one suits them I didnt mention anything about benchmarks... right?
Press Thanks if I helped
Click to expand...
Click to collapse
The benchmarks note was for other people, it's in another line
Also, it doesn't matter if it's for our device or not, the topic give YOU the best results, others will probably have to test themselves, so i still see no point in this.
However, i am just saying my opinion, good luck

Skander1998 said:
The benchmarks note was for other people, it's in another line
Also, it doesn't matter if it's for our device or not, the topic give YOU the best results, others will probably have to test themselves, so i still see no point in this.
However, i am just saying my opinion, good luck
Click to expand...
Click to collapse
Okay. But it will still save people from going off topic in devs thread...

which kernel r u using? bam v14 doesnt have interactivex !!

[KERNEL][OP3/3T][LOS15.1][AOSPA][Synapse] White Wolf Kernel (30/11/2018)

[url=https://postimages.org/]
[/URL]​
This is a home of new re branded yarpiin kernel for Lineage OS based roms.
Would like to thank to all devs that work has been used to create this kernel.​
SO WE STARTING A LIST:
all CREDITS goes to:
@Grarak
@Mahdi786
@Lord Boeffla
@franciscofranco
@ Despair Factor
@ak
@ZaneZam
@varun.chitre15
@flar2
@arter97
@TheCrazyLex
@Sultanxda
@eng.stk
@neobuddy89
@Tkkg1994
@frap129
@jcadduono
@savoca
@yank-lu.555
@Dorimanx
@acuicultor
@Alucard24
@bbedward
@nathanchance
@Maxwen
@mostafaz
@joshuous
@faux123
@rainforce279
@Paranoid Android Team
and all others devs that make our lives easier.
Special thanx for @urgali , @Sungfive and @Duncan1982 for testing .
@Cybertron™ for new thread and signature images.
@Saber for his superb thread with all detailed kernel stuff.
Short Feature list:
Basic Governors plus:
Darkness, Nightmare, Alucard, Impulse, Blu Active
Overclocked both clusters
Adjustable thermal driver
Power Efficient Workqueues
State Notifier Driver
I/o schedulers: fiops, sio, zen, maple
Adrenoboost
Adreno Idler
Simple gpu algorithm
Backlight dimmer
Kacal control
Power Suspend driver
USB Fast Charge
Eagle DTS driver
Built in Busybox
Uses a simple free and user friendly application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality)
Synapse is included in zip and flashed by default as a system app.​
Synapse is based on new UKM - Lite version. It does contain less settings than standard version for less advanced users. For those who wish to use full power of Synapse additional UKM zip have to be flashed after Kernel. ​
UKM Full flashable zip download link​
https://www.androidfilehost.com/?w=files&flid=154993​
Flashing instructions
1. Flash in recovery no black magic
3. If missing tunables for governors set SElinux to permissive​
Compatibility list:
LOS Kernel have been tested with official Lineage OS 15.1
PA Test Kernel works with AOSPA and its based on Paranoid Android Kernel Source and all credits belong to Paranoid Android Team.
And Finaly Download Link:
WHITE WOLF LOS 15.1
https://www.androidfilehost.com/?w=files&flid=253747]
WHITE WOLF AOSPA test kernel (Paranoid Android )
https://www.androidfilehost.com/?w=files&flid=186508
LOS Source
https://github.com/yarpiin/White-Wolf-OP3-LOS
PA Source
https://github.com/yarpiin/White-Wolf-OP3-PA​
If You like my work buy me a beer ​https://www.paypal.me/yarpiin​
XDA:DevDB Information
White Wolf Kernel, Kernel for the OnePlus 3
Contributors
yarpiin
Source Code: https://github.com/yarpiin
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: WHITE.WOLF.OP3.XXX
Stable Release Date: 2017-05-30
Created 2016-12-22
Last Updated 2018-11-30

WHITE.WOLF.OP3.LOS.15.1 - Changelog
https://github.com/yarpiin/White-Wolf-OP3-LOS/blob/master/changelog.txt
WHITE.WOLF.OP3.PA - Changelog
[url]https://github.com/yarpiin/White-Wolf-OP3-PA/blob/nougat-mr2/changelog.txt[/URL]

Hall Of Fame
This is a list of people who contributed donations to this project or helped in it
Helpers​
- @urgali
- @Sungfive
- @Duncan1982
- @Cybertron™ - Thread and signature images
Donators​
- @urgali
- @A Sad Napkin
- @real76
- Unknown memeber named Amir
- @ctakah27
- SB
Thank you a lot !!!​
Signature Image Link​

thanks!
I am downloading

Thanks man 5 stars from me

Thanks ! Wait for OxygenOS Version
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

Wow awesome thx. Running very nice with my suicide squad rom. Awesome fast and smooth. Your kernel has potential keep it up

Flashed to XenonHD.
Very smooth!

Great kernel.
Keep it up.

I build a kernel and thanks for posting source I see a few govs I will add to my list
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

ZeNiXxX said:
Wow awesome thx. Running very nice with my suicide squad rom. Awesome fast and smooth. Your kernel has potential keep it up
Click to expand...
Click to collapse
I'm bout flash on same.rom, lol

Uhh, something to play with on Nougat!
Good stuff

@yarpiin Have You plans to implement OC?

rafciowis1999 said:
@yarpiin Have You plans to implement OC?
Click to expand...
Click to collapse
Hi sorry but no or maybe no :silly: i was thinkin about it but im not a big fan of OC i can OC my PC ( actually higly OCed ) but not mobile chip i think we have enough of cpu power but maybe in future i will change my mind - just for now dont see any strong reason to do it
Sent from my ONEPLUS A3003 using XDA Labs

yarpiin said:
Hi sorry but no or maybe no :silly: i was thinkin about it but im not a big fan of OC i can OC my PC ( actually higly OCed ) but not mobile chip i think we have enough of cpu power but maybe in future i will change my mind - just for now dont see any strong reason to do it
Click to expand...
Click to collapse
Good reason.
I think OC will be good but not as default.
Backporting i/o schedulers and governors from newest linux will be great too (mostly cfq, deadline and interactive).

Only request would be sound controls if possible to add from ex kernel or wherever...? Running alacurd and hotplug and it's buttery smooth and awesome battery! Good job with this bro
---------- Post added at 12:33 AM ---------- Previous post was at 12:33 AM ----------
Will have any chance to make profiles for synapse?

yarpiin said:
Hi sorry but no or maybe no :silly: i was thinkin about it but im not a big fan of OC i can OC my PC ( actually higly OCed ) but not mobile chip i think we have enough of cpu power but maybe in future i will change my mind - just for now dont see any strong reason to do it
Sent from my ONEPLUS A3003 using XDA Labs
Click to expand...
Click to collapse
The only OC that is useful for this phone is upping the big cores to 2.26ghz and the little to 1.72ghz. The voltage stays the same so you get a minor speed bump but power draw is identical. This in turn gives slightly better battery life because the phone can go back to idle slightly quicker. Anything higher starts causing the phone to thermal throttle much quicker, well in my case that is.
Also, I see you have implemented hotplugging, as mentioned in many different kernel threads for multiple devices that use big.LITTLE (OP3, S6, etc.) This is uncessary and causes more battery drain while also reducing performance because these cores were designed to go idle when not in use consuming nearly zero energy. Hotplugging makes these cores jump between on and off all the time and lower and higher frequencies because of the way big.LITTLE works which causes massive microstutter and also much higher battery drain.
In the good old S6 days a couple devs tried to implement it but it never worked no matter what they tried. Sultan, one our devs here, makes an amazing custom kernel/ROM combination. He had implemented hotplugging when he first released the kernel but it turned out to not fully work properly and caused extra battery drain and microstutters. He removed it and it fixed all the issues.
Edit: haven't used the kernel yet because cm14.1 is a bugfest so this is just speculation, you could have added a little magic and it performs super well.

yung40oz84 said:
I'm bout flash on same.rom, lol
Click to expand...
Click to collapse
Suicide squad rom?

crzykiller said:
The only OC that is useful for this phone is upping the big cores to 2.26ghz and the little to 1.72ghz. The voltage stays the same so you get a minor speed bump but power draw is identical. This in turn gives slightly better battery life because the phone can go back to idle slightly quicker. Anything higher starts causing the phone to thermal throttle much quicker, well in my case that is.
Also, I see you have implemented hotplugging, as mentioned in many different kernel threads for multiple devices that use big.LITTLE (OP3, S6, etc.) This is uncessary and causes more battery drain while also reducing performance because these cores were designed to go idle when not in use consuming nearly zero energy. Hotplugging makes these cores jump between on and off all the time and lower and higher frequencies because of the way big.LITTLE works which causes massive microstutter and also much higher battery drain.
In the good old S6 days a couple devs tried to implement it but it never worked no matter what they tried. Sultan, one our devs here, makes an amazing custom kernel/ROM combination. He had implemented hotplugging when he first released the kernel but it turned out to not fully work properly and caused extra battery drain and microstutters. He removed it and it fixed all the issues.
Edit: haven't used the kernel yet because cm14.1 is a bugfest so this is just speculation, you could have added a little magic and it performs super well.
Click to expand...
Click to collapse
I don't believe the hotplug theory, I've used it with and without hotplug on this device and the 6P and when using hotplug it clearly saved battery, by a good shot too! You dint have to use it, that's why u can enable/disable, but I'm sure it saves battery as I've tested with it enabled and disabled two devices with the big.LITTLE setup. And honestly, besides one other kernel that is not in these threads, this is the best kernel I've used to date for the OP3, on CM that is, not stock. I've ran ex, boeffla, all CM kernels and as I mentioned one other not located in these threads and that one and this are damn good, they each have their benefits, and the hotplug def saved battery as I've already passed my regular SOT at 40 percent left. Of course I will test without, but with my previous tests on the 6P the hotplug continuously saved battery. Sometimes it mate cause stutter or slowness, but I have not noticed that on the OP3 as of yet, it hasn't slowed a thing down, and there are 2 hotplug options in this kernel, and the hotplug in the 6P was msm which is not one that's in this kernel. This has two other options, alacurd and autosmp.

OC - as i said if there are solid reasons then yes might think about it . But from theory higher frequency equals higher temp and faster thermal throttling
Hotplugging - never heard about theory that make hotplugging causing more battery drain than keeping all clusters/cores online it is a bit non sense for me. Anyway stock Qualcomm kernels are hotplugged using msm performance and core ctl . As i dont like them they been replaced by custom made hotplugging drivers that are optional you can activate and deactivate driver as you wish
CM14.1 - I was on official and now on RR and havent noticed any major bugs neither small ones , they are solid enough to be a daily drivers
Sent from my ONEPLUS A3003 using XDA Labs