[HELP] Bass Loss After Uninstalling Viper4Android - General Questions and Answers

Hello,
I have a rooted Samsung J2 2016. I thought of getting Viper4Android and when I tried to install the drivers it just said drivers installed reboot your phone. I rebooted it 2 times but still it said driver 0.0.0.0 and would ask for permission for updating drivers again. Fed up of this I went to Link2SD app and uninstalled the app. As I had flashed the zip file for Viper, it erased the sound drivers(I think) and I couldnt get any audio through the ear phones so I decided to do a factory reset of the phone by flashing the latest firmware update(This usually removes all apps, TWRP and root from my phone). After I did the factory reset I noticed that all the apps that I had before were still thereconfused I ignored it and plugged in my headphones only to find a complete loss in bass. I tried to tweak the inbuilt equalizer but nothing came out of it. After restarting, bass would enable for a few seconds and then it would disable again. I dont know what to do now. How can I get back my deleted drivers(if they got deleted)?
P.S. I had taken a complete backup but it got erased from the SD card after I formatted it as portable storage( I had it enabled for adoptable storage through root essentials. This might be the reason why the phone didnt factory reset) :crying:
Sorry for the long post. Im a beginner at this. Any help would be appreciated. Thank you
Edit- I tried different earphones and different music players but no success

darshan1504 said:
Hello,
I have a rooted Samsung J2 2016. I thought of getting Viper4Android and when I tried to install the drivers it just said drivers installed reboot your phone. I rebooted it 2 times but still it said driver 0.0.0.0 and would ask for permission for updating drivers again. Fed up of this I went to Link2SD app and uninstalled the app. As I had flashed the zip file for Viper, it erased the sound drivers(I think) and I couldnt get any audio through the ear phones so I decided to do a factory reset of the phone by flashing the latest firmware update(This usually removes all apps, TWRP and root from my phone). After I did the factory reset I noticed that all the apps that I had before were still thereconfused I ignored it and plugged in my headphones only to find a complete loss in bass. I tried to tweak the inbuilt equalizer but nothing came out of it. After restarting, bass would enable for a few seconds and then it would disable again. I dont know what to do now. How can I get back my deleted drivers(if they got deleted)?
P.S. I had taken a complete backup but it got erased from the SD card after I formatted it as portable storage( I had it enabled for adoptable storage through root essentials. This might be the reason why the phone didnt factory reset) :crying:
Sorry for the long post. Im a beginner at this. Any help would be appreciated. Thank you
Edit- I tried different earphones and different music players but no success
Click to expand...
Click to collapse
You probably needed to make sure you had SELinux set to permissive mode, then V4A would probably install the driver and reboot correctly without having to do it again.
You have 2 options:
1) reflash your stock firmware or your custom ROM, whichever one you're using. This will replace what was removed when you flashed V4A zip.
Or
2) enable permissive mode and try V4A again.
Or if you'd like, you can flash your stock or custom ROM just to get things back to a clean start and then try installing V4A again in permissive mode and see if it works right this time.
By the way, when flashing with Odin, it doesn't erase user data unless what you're flashing includes an upgraded/downgraded bootloader. When flashing exactly what you had, it leaves your data intact.
This time, when you flash stock firmware via Odin, boot the device to recovery and factory reset from within recovery, this will wipe user data, then connect to Odin and flash firmware. This should return everything to like it came out of the box.
By the way, in android, the term "factory reset" does not mean flashing stock firmware, that's called "factory restore".
In android, the term factory reset is something completely different, in android, it means wiping user data and leaving only the stock software.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
You probably needed to make sure you had SELinux set to permissive mode, then V4A would probably install the driver and reboot correctly without having to do it again.
You have 2 options:
1) reflash your stock firmware or your custom ROM, whichever one you're using. This will replace what was removed when you flashed V4A zip.
Or
2) enable permissive mode and try V4A again.
Or if you'd like, you can flash your stock or custom ROM just to get things back to a clean start and then try installing V4A again in permissive mode and see if it works right this time.
By the way, when flashing with Odin, it doesn't erase user data unless what you're flashing includes an upgraded/downgraded bootloader. When flashing exactly what you had, it leaves your data intact.
This time, when you flash stock firmware via Odin, boot the device to recovery and factory reset from within recovery, this will wipe user data, then connect to Odin and flash firmware. This should return everything to like it came out of the box.
By the way, in android, the term "factory reset" does not mean flashing stock firmware, that's called "factory restore".
In android, the term factory reset is something completely different, in android, it means wiping user data and leaving only the stock software.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Thank you for replying. The problem is that I am running the stock touchwiz samsung ROM so SELinuxModeChanger doesn't work for me. I would like to go with the second option but I can't find any other method to make it permissive. Can you please help me with this? I dont want to do a factory reset cause talking the phone back to how it is will be a real pain and time consuming. Will just flashing the Viper file again do the job in any way?

Droidriven said:
You probably needed to make sure you had SELinux set to permissive mode, then V4A would probably install the driver and reboot correctly without having to do it again.
You have 2 options:
1) reflash your stock firmware or your custom ROM, whichever one you're using. This will replace what was removed when you flashed V4A zip.
Or
2) enable permissive mode and try V4A again.
Or if you'd like, you can flash your stock or custom ROM just to get things back to a clean start and then try installing V4A again in permissive mode and see if it works right this time.
By the way, when flashing with Odin, it doesn't erase user data unless what you're flashing includes an upgraded/downgraded bootloader. When flashing exactly what you had, it leaves your data intact.
This time, when you flash stock firmware via Odin, boot the device to recovery and factory reset from within recovery, this will wipe user data, then connect to Odin and flash firmware. This should return everything to like it came out of the box.
By the way, in android, the term "factory reset" does not mean flashing stock firmware, that's called "factory restore".
In android, the term factory reset is something completely different, in android, it means wiping user data and leaving only the stock software.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Also sir I found an old complete titanium backup on my laptop. So can it have the original drivers? If yes can I restore them using titanium and how?
I am sorry for asking so many questions but listening to music is what I do most of the times and I am feeling guilty for screwing up something that I like the most and that I can not restore it :crying:

darshan1504 said:
Also sir I found an old complete titanium backup on my laptop. So can it have the original drivers? If yes can I restore them using titanium and how?
I am sorry for asking so many questions but listening to music is what I do most of the times and I am feeling guilty for screwing up something that I like the most and that I can not restore it :crying:
Click to expand...
Click to collapse
What you need wouldn't be in a Titanium Backup file unless you backed up system apps and their data.
If you had a TWRP backup from before you installed V4A then you could use that. Otherwise than that, you'll have to flash stock firmware or at least manually reinstall the stock sound app and it's resources.
Best option to be sure you fix it without having to dig through anything is to flash stock firmware and start over and do it correctly the next time.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
What you need wouldn't be in a Titanium Backup file unless you backed up system apps and their data.
If you had a TWRP backup from before you installed V4A then you could use that. Otherwise than that, you'll have to flash stock firmware or at least manually reinstall the stock sound app and it's resources.
Best option to be sure you fix it without having to dig through anything is to flash stock firmware and start over and do it correctly the next time.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
The titanium backup is a complete system backup. I had chosen the backup all apps and system data option in Titanium and when I went through the backup files, I found the Sound Alive files in it. Those files were different from the ones which I currently have. So this is what I have in the end. If this is useful then fine. Otherwise there's no other option left I guess

darshan1504 said:
The titanium backup is a complete system backup. I had chosen the backup all apps and system data option in Titanium and when I went through the backup files, I found the Sound Alive files in it. Those files were different from the ones which I currently have. So this is what I have in the end. If this is useful then fine. Otherwise there's no other option left I guess
Click to expand...
Click to collapse
No, it's not a complete system backup because Titanium Backup can't do a complete system backup, the only part of system it can backup is system apps and their app data, it doesn't backup anything else from system. TWRP can make a complete system backup but Titanium Backup can't.
If you backed up the system apps themselves then yes, you can restore them but I wouldn't restore any of the app data that goes with those system apps.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
No, it's not a complete system backup because Titanium Backup can't do a complete system backup, the only part of system it can backup is system apps and their app data, it doesn't backup anything else from system. TWRP can make a complete system backup but Titanium Backup can't.
If you backed up the system apps themselves then yes, you can restore them but I wouldn't restore any of the app data that goes with those system apps.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
I did a factory reset through TWRP and flashed it again. That did the trick. Thank you for all the help

Related

Restore TWRP Backup?

Hi, just have a quick question that's been bugging me for a while now. If I have made a full backup using TWRP and I want to restore it, should I:
Fully wipe system and caches and then restore; or just restore right over my current ROM?
****, good question
Sent from my HTC One X using xda app-developers app
Restore takes care of wiping for you.
Piggybacking off the OP, sometimes when I try to restore my TWRP backup it fails, and then the only way I've found to get it working again is to do a boot loader factory reset, and then essentially start from scratch or load an older working backup. No problem, just a minor annoyance. Is there something I'm doing wrong or any advice someone can give me?
Sent from my HTC One X using xda app-developers app
Hydromea said:
Hi, just have a quick question that's been bugging me for a while now. If I have made a full backup using TWRP and I want to restore it, should I:
Fully wipe system and caches and then restore; or just restore right over my current ROM?
Click to expand...
Click to collapse
I always wipe everything before a restore, just in case
Better safe than sorry
Restoring a back up !
When restoring a back up from any recovery wipe everything just as if you were installing a new rom. Factory reset, cache, dalvik cache, system just to be safe. Factory reset wipes data and all cache but not system and if you do a factory reset and then try to wipe I think dalvik again you get an error but no harm done it just will not do it again. I usually do them all and then do the superwipe zip and that willl give you a good piece of mind that it is properly wiped. Also, I have noticed that using the external sd card seems to work best for installing roms or backing up and restoring back ups or anything else like mods or themes. Here is the superwipe zip in case anyone needs it.
Hydromea said:
Hi, just have a quick question that's been bugging me for a while now. If I have made a full backup using TWRP and I want to restore it, should I:
Fully wipe system and caches and then restore; or just restore right over my current ROM?
Click to expand...
Click to collapse
I've done both, but I like not having reinstall all my apps, and reset all my ringtone, and that goes with a full wipe. so when ever i can i flash over. Just make sure your slashing the same rom over the old one.
You shouldn't worry about losing ANYTHING on a backup when you do a factory reset, because the backup houses all of the data and settings anyway.
All you do is Factory Reset, Nandroid>Restore, and your old backup will flash everything the way it was when you did a backup in the first place. Factory Reset is always wise, especially when you're fiddling with different ROM's based on different kernels or systems (AOSP/Sense).
XNine said:
You shouldn't worry about losing ANYTHING on a backup when you do a factory reset, because the backup houses all of the data and settings anyway.
All you do is Factory Reset, Nandroid>Restore, and your old backup will flash everything the way it was when you did a backup in the first place. Factory Reset is always wise, especially when you're fiddling with different ROM's based on different kernels or systems (AOSP/Sense).
Click to expand...
Click to collapse
Ahh, this is true I recant my statement. I was mistakenly thinking about flashing a new ROM over an older version, not a buck-up. I feel stupid.
when restoring a nandroid if you've got the new HBoot I think you have to restore boot.img separately via fastboot. Is that right?
gunnyman said:
when restoring a nandroid if you've got the new HBoot I think you have to restore boot.img separately via fastboot. Is that right?
Click to expand...
Click to collapse
Nope. I just flashed a bunch of roms yesterday and did restores with no issue. I think if your using the stock rooted 2.2 you are correct, but any other rom a restore works fine.
Not Restoring = Bad Idea
Hydromea said:
Hi, just have a quick question that's been bugging me for a while now. If I have made a full backup using TWRP and I want to restore it, should I:
Fully wipe system and caches and then restore; or just restore right over my current ROM?
Click to expand...
Click to collapse
I have made the mistake of not wiping everything (excluding sd card) when changing ROMs or when restoring from a backup. This may be a little different because it was when I was switching to a new ROM on my brother's phone, but I tried to take the lazy way out and not restore everything. I really didn't feel like redownloading everything. I soon learned that this was a mistake, and his "phone" app suddenly disappeared. He was also unable to send or receive texts. This soon made the process even longer than I wished it to be because I needed to go back and restore everything again and get it back to normal.
Error While Restoring using twrp
I took a back up of everything using TWRP and then when i tried to restored its giving me error while restoring system E:Unable to extract tar archive . Please help
Are you trying to restore a backup from a different version of TWRP? For example, currently running 2.7.0.8 but backup was originally made using 2.3.3.1?
Sent from my Evita
error on backup restore twrp
hi i have a nexus 4 running 6.0.1 reserection remix, however when i do a backup on twrp then transfer
it to my pc its fine, but when i restore it it not going as a zip and its giving me this error, could not find meta-inf/com/google/android/update-binary' in the zip file. error installing zip file/sdcard/twrp/backups/01c237769c62991c.zip please help, thanks
Become a member of the w
WOW! After a good 3/4 days of frustration, thinking I had ruined my device, I finally got my TWRP backup to restore.
It's my first time using this software and the restoration process is truly amazing. I mean, my test messages were still there, even my browser history and last page loaded up in chrome were still there. I'm blown away.
The strange thing is that It didn't work when all 3 partitions were selected. When I tried it this way (as per the many step by step instructions that I read) my phone would load up a black screen with just the notification bar visible. I'd see my voicemail, sms, wifi and battery icons at the top, but absolutely nothing else except for a myriad of pop ups that read 'Unfortunately [app name] has stopped working'.
So I bit the bullet and did some trial and error with the partitions.
Turns out that when I only selected 2 of the 3 (I believe they were 'Boot', 'Data' and deselected 'System') everything loaded up just as it was before the backup, except there were only the stock apps available and no google services at all. .....Very odd.
So I did the boot to recovery method before turning the phone off (vol. up - Home - Power) which restarted the phone and strangely brought back EVERYTHING as mentioned at the start of this post.
You can probably understand my confusion here and while I'm VERY happy that it all worked out, I don't understand why it worked with only 2 of the partitions but not with the recommended 3 of them?
Can anyone shed any light on this?
---------- Post added at 01:16 PM ---------- Previous post was at 01:02 PM ----------
debmikeshan said:
hi i have a nexus 4 running 6.0.1 reserection remix, however when i do a backup on twrp then transfer
it to my pc its fine, but when i restore it it not going as a zip and its giving me this error, could not find meta-inf/com/google/android/update-binary' in the zip file. error installing zip file/sdcard/twrp/backups/01c237769c62991c.zip please help, thanks
Become a member of the w
Click to expand...
Click to collapse
Hmmm. I'm definitely no pro at this stuff, in fact i'm very new when it comes to using TWRP, but this is what happened with me.
First of all, the backup that I did was simply a folder of files, not zip.
Transferred that do my PC, wiped my phone with TWRP and replaced the backup folder back into the TWRP/Backup folder. However, after reading up on how to restore on about 10 different android sites/forums, only 1 post shared the most vital piece of information.
You folder has to be in the 'serial' number folder that's located in the 'Backup' folder for TWRP.
When I put my backup folder just into the TWRP/Backup folder, the Restore section would only see the folder itself but the partitions were not available/listed for selection.
Once I placed my Backup folder into the TWRP/Backup/e1oog75 (that alphanumeric name is just a random example made for visual clarity) folder, my partitions were visible and available for selection right away.
Hopefully this helps somewhat.

[Completed] Restore OS After Wiping System Partition - Galaxy S5

Due to problems with Google Services on my rooted Galaxy S5 (SM-G900F) I opted for a reset from TWRP and it returned to a condition where after some initial screens it was just stuck at "Checking for Updates" so I went back into TWRP and told it to wipe the other partitions. Whoops - now I have no OS (I was sort of assuming that the factory reset OS was somewhere else)
Which is the stock ROM for my Region - UK, unbranded - where do I get it from and how do I load it using Odin and/or TWRP?
TIA
Hello,
Did you make a nandroid backup of your stock ROM or a nandroid backup of a custom ROM if you installed one? If you have a nandroid backup of either of those then you can restore them in TWRP by choosing the restore option and then your nandroid then swipe the slider at the bottom of the screen. If you installed a custom ROM at any time before this and you still have the ROM file then you can reflash the ROM and Gapps.
If you don't have a custom ROM stored anywhere but can still get to recovery, then you can download any of the custom ROMs compatible with your device and a Gapps package that matches it and put them on your extsdcard then boot to recovery and flash the ROM and gapps, do the normal wipes in recovery after flashing, the normal wipes(wipe data/factory reset, wipe cache and wipe dalvik cache), DO NOT CHOOSE THE ADVANCED OPTIONS THAT LET YOU WIPE PARTITIONS.
Check this thread to see if it is your stock firmware, it SHOULD be but double check first, it also has instructions for rooting again and installing recovery.
http://forum.xda-developers.com/galaxy-s5/development/stock-rom-root-recovery-sm-g900f-t2967725
If that doesn't work then go to Sammobile.com and search for your stock firmware by using your device model number.
The firmwares can sometimes be found at samsung-updates.com also.
Find the right firmware for your exact model number and flash through Odin.
For further assistance, post your question in the forum linked below.
http://forum.xda-developers.com/galaxy-s5/help
Good luck.
Droidriven said:
Did you make a nandroid backup of your stock ROM or a nandroid backup of a custom ROM if you installed one?
Click to expand...
Click to collapse
Sadly not - wasn't expecting to need it, thought it would revert to factory default - I have Titanium backup of apps and data.
I am hopefully a few minutes away from downloading the stock ROM and hopefully can reflash that using ODIN.
KD
colehill said:
Sadly not - wasn't expecting to need it, thought it would revert to factory default - I have Titanium backup of apps and data.
I am hopefully a few minutes away from downloading the stock ROM and hopefully can reflash that using ODIN.
KD
Click to expand...
Click to collapse
Making nandroid backups in recovery is the most important and valuable function of custom recovery, flashing ROMs is its' secondary purpose Android is not like PC with a recovery partition that restores a factory IMG, on PC that factory IMG is stored in a recovery partition. The factory reset feature in stock android does not restore an IMG, it deletes all data from the user partition and leaves everything in system partition the way it is, if you delete a system app and then do a factory reset then you will still not have the system app that you deleted. Anything you modify in system remains the way you modified it if you use the factory reset option. You should only use the factory reset in recovery, not the factory reset in system settings when you have a rooted device with custom recovery.
I'm sure that when you found the recovery, the directions had to have mentioned making a nandroid backup of your stock ROM before flashing anything, your present situation is why you do that, so that if anything goes wrong then you can easily restore to the one ROM that you know for sure works with no issues.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
I'm sure that when you found the recovery, the directions had to have mentioned making a nandroid backup of your stock ROM before flashing anything, your present situation is why you do that, so that if anything goes wrong then you can easily restore to the one ROM that you know for sure works with no issues.
Click to expand...
Click to collapse
I installed the TWERP recovery as part of the rooting operation and I didn't pay any attention to the backup option - I thought that's what Titanium did.
I am learning and will make sure that I take a Nandroid backup once I have it back up and running. Life would be so much simpler if only Samsunng didn't stuff their 'phones with bloatware that can't be deleted in stock mode.
KD
colehill said:
I installed the TWERP recovery as part of the rooting operation and I didn't pay any attention to the backup option - I thought that's what Titanium did.
I am learning and will make sure that I take a Nandroid backup once I have it back up and running. Life would be so much simpler if only Samsunng didn't stuff their 'phones with bloatware that can't be deleted in stock mode.
KD
Click to expand...
Click to collapse
Titanium backup can only backup data that you installed or downloaded, it does not backup anything that comes on the phone itself, that is what custom recovery is for.
When following guides to mod your device, read and understand ALL instructions before you even make the first move to touch your device. Get used to being thorough about reading and understanding first or you'll end up in a mess, possibly even hard brick your device, all it takes is one wrong move. Not all mistakes are fixable with android devices.
Sent from my SCH-I535 using Tapatalk

System Update advise

My XT1540/rooted/stock 6.0 ROM/ stock recovery now has an update available. I assume I can not accept this system update, even if I un-root my device. I do have a pre-rooted TWRP back up. I can reload that image, but my concern is the best way to get all my apps and data reloaded. I do have TB backups, but I thought that may not be a good option after system update. I am looking for advise how to proceed getting the latest system update and preserving all my current apps and data.
No offense, but did you Google it or search here? There are several tutorials in this device section and other similar Moto devices of the same generation that tell you different ways to do it...
Easy way... boot (not flash) TWPR, backup in TWRP, restore pre-root backup, accept OTA and allow it flash and fully boot, boot TWRP, flash your root of choice that you were using prior (Magisk or SuperSU), reboot and verify operation, then restore data partition backup you did prior to OTA, clear caches, and reboot.
This works 80% of the time... if your data partition is important then make an alternative backup.
acejavelin said:
No offense, but did you Google it or search here? There are several tutorials in this device section and other similar Moto devices of the same generation that tell you different ways to do it...
Easy way... boot (not flash) TWPR, backup in TWRP, restore pre-root backup, accept OTA and allow it flash and fully boot, boot TWRP, flash your root of choice that you were using prior (Magisk or SuperSU), reboot and verify operation, then restore data partition backup you did prior to OTA, clear caches, and reboot.
This works 80% of the time... if your data partition is important then make an alternative backup.
Click to expand...
Click to collapse
Thanks. I have read conflicting information on the use of Titanium Backup, and that was my main reason for my post. My understanding of your reply is that TB would not be a recommended choice to restore apps&data (using either update.zip or batch mode) and that I have an 80% chance of restoring user apps and data by flashing the /data partition from my pre-OTA TWRP backup. And yes, I will make a pre-rooted backup prior to rooting or restoring apps.
I never heard of Magisk and will read more. In the mean time I will stick with SuperSU unless there is strong advise to go with Magisk.
MrTooPhone said:
Thanks. I have read conflicting information on the use of Titanium Backup, and that was my main reason for my post. My understanding of your reply is that TB would not be a recommended choice to restore apps&data (using either update.zip or batch mode) and that I have an 80% chance of restoring user apps and data by flashing the /data partition from my pre-OTA TWRP backup. And yes, I will make a pre-rooted backup prior to rooting or restoring apps.
I never heard of Magisk and will read more. In the mean time I will stick with SuperSU unless there is strong advise to go with Magisk.
Click to expand...
Click to collapse
I dislike TiBU... It is best to reinstall from scratch each time if possible, if not, this is a simple security update to TWRP should suffice.
Magisk is good, and it appears to be the root method most ROMs are going to because with Magisk Hide and a few tweaks that are built in, the device can still pass SafetyNet API checks, and there is no special process for systemless installing (it is the only way it can be done with Magisk). But if you are on SuperSU now and want to restore the data partition, do NOT switch that way... Get clean ROM and flash Magisk then install Magisk Manager. It has it's own community here: https://forum.xda-developers.com/apps/magisk
I am not saying Magisk is superior, but it is quite versatile and most ROMs seem to be switching to it so devices can pass SafetyNet checks.
I was also thinking this would be simple. Pleasant surprise after almost a year and a half to get a security update. So I uninstalled SuperSU (Tried Full Unroot option & it failed, so then just uninstalled the app.....Looks like I may still be rooted), re-installed the stock recovery, and with absolutely no other modifications to this phone, performed the update. So it failed. I thought I was able to do this on my Nexus 4, but that was a while back, and I always did it with a file, not OTA; maybe that was just OS update, who knows. I was just looking for some security peace of mind while waiting for Nougat to become a bit more stable. If I am going to have to go through hoops to do this, then I guess I will just wait; not going to go through this twice. Besides, will it be another year for the next security update; heck, they are already 1 or 2 months behind already.
The answer is what others said, plus you can try flashing OTA updates with flashfire, and don't choose to wipe data.
Rohi09 said:
The answer is what others said, plus you can try flashing OTA updates with flashfire, and don't choose to wipe data.
Click to expand...
Click to collapse
Oh well. On a side note, always grateful for making Nandroid backups before I start playing around with anything though. Things were acting up after haphazardly trying various SuperSU options, so I had to do a restore.
These constant OTA update messages every few minutes that I have to keep canceling are brutal! I might have to install an app to kill them.
Rohi09 said:
The answer is what others said, plus you can try flashing OTA updates with flashfire, and don't choose to wipe data.
Click to expand...
Click to collapse
Are you saying OTA updates can be flashed successfully without unrooting.
MrTooPhone said:
Are you saying OTA updates can be flashed successfully without unrooting.
Click to expand...
Click to collapse
that's the idea, I have never tried it on moto g 2015 though. As far as I know every root solution had its own Uninstaller. which root interface do you use? magisk or supersu?
Rohi09 said:
that's the idea, I have never tried it on moto g 2015 though. As far as I know every root solution had its own Uninstaller. which root interface do you use? magisk or supersu?
Click to expand...
Click to collapse
I have SuperSU. It would be great to flash an OTA over my current system, but I have heard many reports including @pjc123 above where it did not work.
All my searches resulted in suggestions in going back to stock, accept OTA, then use TB or some other similar program to restore saved apps & data. Tomorrow I will try @acejavelin 's above suggested method of flashing the /data partition. If that does not work, I will try TB. I will report my progress.
MrTooPhone said:
I have SuperSU. It would be great to flash an OTA over my current system, but I have heard many reports including @pjc123 above where it did not work.
All my searches resulted in suggestions in going back to stock, accept OTA, then use TB or some other similar program to restore saved apps & data. Tomorrow I will try @acejavelin 's above suggested method of flashing the /data partition. If that does not work, I will try TB. I will report my progress.
Click to expand...
Click to collapse
you can flash unsu zip or magisk Uninstaller and try to install ota via flashfire, won't hurt trying, might save you some time.
acejavelin said:
No offense, but did you Google it or search here? There are several tutorials in this device section and other similar Moto devices of the same generation that tell you different ways to do it...
Easy way... boot (not flash) TWPR, backup in TWRP, restore pre-root backup, accept OTA and allow it flash and fully boot, boot TWRP, flash your root of choice that you were using prior (Magisk or SuperSU), reboot and verify operation, then restore data partition backup you did prior to OTA, clear caches, and reboot.
This works 80% of the time... if your data partition is important then make an alternative backup.
Click to expand...
Click to collapse
Another dumb question, I am in the process of installing OTA. When I loaded the pre-root rom, I did not see any option to clear clear caches. I did see a wipe data and cache option which I understand to be a factory reset. I know I have seen it before but can't find it, so where do I clear cache after restoring data partition?
MrTooPhone said:
Another dumb question, I am in the process of installing OTA. When I loaded the pre-root rom, I did not see any option to clear clear caches. I did see a wipe data and cache option which I understand to be a factory reset. I know I have seen it before but can't find it, so where do I clear cache after restoring data partition?
Click to expand...
Click to collapse
Another simple Google question...
Open TWRP, go to Wipes - Advanced, and select Cache and Dalvik cache (a misnomer today, it should be called ART cache) and swipe to wipe, then reboot.
Thanks to @acejavelin recommendations, I have successfully applied the latest system update to my XT1540. My steps were as follows:
Booted to TWRP (3.0.2-r5.img)
restored original pre-rooted ROM
rebooted, accepted system updates
backed up new pre-rooted ROM
installed SuperSU 2.62-3, rebooted
updated SuperSU to 2.79 via Playstore
restored /data partition from last saved rooted ROM
wiped Dalvik/ART Cache
Reboot system
took a while, a couple of minutes on “Hand stitched by Peter Crawly”, several minutes optimizing apps. The phone booted succesfully then I got an error message the update failed (which I hit OK) But looking at about phone, latest security patch is listed. Phone looks configured (apps, data, configuration) exactly as it was prior to the update.
Rebooted phone, all still seems fine.
Hello, how do I restore original pre-rooted ROM? When I made the backup I got a folder with 6 files:
boot.emmc.win
boot.emmc.win.md5
recovery.log
system.ext4.win
system.ext4.win.md5
system.info
None of them seems to be the .img file
bradmoss said:
Hello, how do I restore original pre-rooted ROM? When I made the backup I got a folder with 6 files:
boot.emmc.win
boot.emmc.win.md5
recovery.log
system.ext4.win
system.ext4.win.md5
system.info
None of them seems to be the .img file
Click to expand...
Click to collapse
Your are not going to see an img file. Once booted into TWRP, select Restore, navigate and select your original ROM. Those files you have listed are within the restoration directory that you select with TWRP. Just select the directory with TWRP.
Bad news, I could restore pre-TRWP image using that folder and aplied the update.
But now I am in a loop, it tries to install (again) the update and then boots to TWRP
Is there any way out of this loop?
Thanks!
no idea? Am I the sad owner of a bricked phone?
bradmoss said:
no idea? Am I the sad owner of a bricked phone?
Click to expand...
Click to collapse
You could try a factory reset if you're not worried about losing your data. A factory reset solves most of the problems, though I'm a little doubtful because a factory reset won't uninstall the new update (given that it installed in the first place).
bradmoss said:
Bad news, I could restore pre-TRWP image using that folder and aplied the update.
But now I am in a loop, it tries to install (again) the update and then boots to TWRP
Is there any way out of this loop?
Thanks!
Click to expand...
Click to collapse
If it boots to TWRP, sounds like you didn't have a clean pre-root ROM as you did not have stock recovery. Did you try deleting Dalvik and ART cache?

All EMUI backups are unbootable when restored to

Throughout my phone's lifetime, I've made a lot of backups, most of which have ended up saved on my hard drive. I recently wanted to go back to stock from a custom rom, so I copied one of the emui backups over and restored to it. Everything seemed to go smoothly, no error messages, but attempting to boot only got stuck on the blue honor boot animation. Tried several other backups, some rooted and heavily customized, some fresh unmodded installs, but all of them did the same thing. Meanwhile, all my custom rom backups work just fine. What gives?
I tried it too and it doesn't work. I think its because to install a custom ROM we format the data using twrp which also removes the encryption of some sorts, when we restore the backup that encryption is lost so it stays stuck at the blue Honor logo. That's my two sense on this. I don't know the real details.
asaditya379 said:
I tried it too and it doesn't work. I think its because to install a custom ROM we format the data using twrp which also removes the encryption of some sorts, when we restore the backup that encryption is lost so it stays stuck at the blue Honor logo. That's my two sense on this. I don't know the real details.
Click to expand...
Click to collapse
That does make more sense than anything I've thought of so far. So to restore from one of these backups, would I just have to reinstall emui from scratch first to get that encryption back? Is there another way to restore them without first having emui? Or are they just useless now?
Gannondalf said:
That does make more sense than anything I've thought of so far. So to restore from one of these backups, would I just have to reinstall emui from scratch first to get that encryption back? Is there another way to restore them without first having emui? Or are they just useless now?
Click to expand...
Click to collapse
I haven't been able to find a solution to this. What I do is use firmware finder to download the firmware+region zip and then install them together in any order via twrp. By this process you lose the data and twrp too as it is replaces by stock recovery. Before booting you must try to get into the stock recover and hit factory reset. You'll get EMUI back but no matter what you do you won't get your data back. Twrp backup is helpless I think because I've tried all sorts of things to get my data back.
asaditya379 said:
I haven't been able to find a solution to this. What I do is use firmware finder to download the firmware+region zip and then install them together in any order via twrp. By this process you lose the data and twrp too as it is replaces by stock recovery. Before booting you must try to get into the stock recover and hit factory reset. You'll get EMUI back but no matter what you do you won't get your data back. Twrp backup is helpless I think because I've tried all sorts of things to get my data back.
Click to expand...
Click to collapse
I've tried flashing emui firmware through twrp before and the region zip always works, but I've never gotten it to load the update.zip (using adb sideload for everything). But I'll try a few different things and see if I can get that to work. Getting back to emui is my primary focus since most of my data is backed up somewhere else, but if I find a way to successfully restore data from backups I'll let you know.
Gannondalf said:
I've tried flashing emui firmware through twrp before and the region zip always works, but I've never gotten it to load the update.zip (using adb sideload for everything). But I'll try a few different things and see if I can get that to work. Getting back to emui is my primary focus since most of my data is backed up somewhere else, but if I find a way to successfully restore data from backups I'll let you know.
Click to expand...
Click to collapse
What I'm telling is probably the easiest way let me break it down for you again.
1. Download firmware+region zip file from firmware finder.
2. Go to twrp, clear everything (format data).
3. Install the two downloaded zip I usually flash firmware and then the region zip.
4. After installation is over don't reboot go back to twrp home screen and reboot to recovery, which will be stock.
5. Format data using stock recover and then clear cache.
6. Restart and everything should work.
And if you find a way to get the twrp backups do post here.

Can I backup & restore including appdata with TWRP?

In the past I've always backed up my complete ROM incl. appdata with twrp. I didn't have to competely setup my device if flashing went wrong and reverted to stock. I had some bad luck flashing roms because the A/B slots are new to me. I now have my bootloader unlocked and everything setup on stock OOS, and made a twrp backup of super, recovery and data.
Before flashing another ROM I just want to make sure I can revert easily to the previous OS without doing a complete setup of app settings and stuff
My question is
Can I wipe/factory reset and then just restore with twrp?
Do I restore when in the active slot where current os is?
Are there any issues with password/encryption when restoring?
Expected scenario;
I'm on stock OOS, wiped and want to restore appdata, settings, homescreen, etc...
I failed to install custom ROM and want to revert to stock OOS without having to redo the entire setup
I did search google and this forum for an answer or guide but couldn't find one (please correct me if I missed a thread)
yusisushi said:
In the past I've always backed up my complete ROM incl. appdata with twrp. I didn't have to competely setup my device if flashing went wrong and reverted to stock. I had some bad luck flashing roms because the A/B slots are new to me. I now have my bootloader unlocked and everything setup on stock OOS, and made a twrp backup of super, recovery and data.
Before flashing another ROM I just want to make sure I can revert easily to the previous OS without doing a complete setup of app settings and stuff
My question is
Can I wipe/factory reset and then just restore with twrp?
Do I restore when in the active slot where current os is?
Are there any issues with password/encryption when restoring?
Expected scenario;
I'm on stock OOS, wiped and want to restore appdata, settings, homescreen, etc...
I failed to install custom ROM and want to revert to stock OOS without having to redo the entire setup
I did search google and this forum for an answer or guide but couldn't find one (please correct me if I missed a thread)
Click to expand...
Click to collapse
Did you read the first 3 posts of https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2022-03-09.4302449/ ?
BillGoss said:
Did you read the first 3 posts of https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2022-03-09.4302449/ ?
Click to expand...
Click to collapse
HI, yes I did
I am still confused because it says before a restore I have to disable screenlock, if my phone is softbricked or has no OS does that count as not having fingerprint/lockscreen enabled?
yusisushi said:
HI, yes I did
I am still confused because it says before a restore I have to disable screenlock, if my phone is softbricked or has no OS does that count as not having fingerprint/lockscreen enabled?
Click to expand...
Click to collapse
When you start TWRP, does it prompt you for a password/pin/pattern?
If Yes, then you have a lock screen password set. And if you can't get into the system to disable it, you'll have to format data (completely wipes all data).
If No, then you're good to go.
BillGoss said:
When you start TWRP, does it prompt you for a password/pin/pattern?
If Yes, then you have a lock screen password set. And if you can't get into the system to disable it, you'll have to format data (completely wipes all data).
If No, then you're good to go.
Click to expand...
Click to collapse
Hi, first of all; thank you for taking time to help me!
I managed to completely wipe the phone including data, and afterwards I restored it by copying the backup (which was now on my computer) and restoring it. SUCCESS! All appdata seems to be there, homescreen, and after second reboot my fingerprint still worked as before.
I just have one more question if you don't mind;
Below partitions I backed up;
Data
Boot
DTBO
Super
However, I'm not able to copy over the "super" partition from my computer to my phone, is this normal? it's almost 8GB and I was convinced I wasn't going to get to the OS without restoring it but apparently I didn't need it (?)
I suppose with the Fastboot Enhance Tool I'll be able to also restore this?
You really only need to backup the "system" partitions (boot, dtbo, super) if you're changing to custom ROMs. If you're always on OOS then you can forget about backing them up.
You should be able to copy the full backup, including super files from your PC to your phone using ADB. I've done that lots of times.
I've never used the tool you referred to. But I do know that you can't use fastboot to flash the super partition - it's too big.
However, if you break it up into chunks (I did it in 512MB chunks) using SparseConverter (https://forum.xda-developers.com/t/tool-sparseconverter-v1-0-1.2749797/) then you can successfully flash it.
Just to confirm, if a ROM bootloops and I don't have access to a computer, there's no way to restore the TWRP backup? Seems like this defeats the point of even making on-device backups (AFAIK encryption can't be disabled for many roms)
tech.central said:
Just to confirm, if a ROM bootloops and I don't have access to a computer, there's no way to restore the TWRP backup? Seems like this defeats the point of even making on-device backups (AFAIK encryption can't be disabled for many roms)
Click to expand...
Click to collapse
If you can enter TWRP (even if your rom bootloops) there is a great chance you can restore backup in TWRP.

Categories

Resources