Related
Hello everybody,
after I deleted some file/maps from my root sd I could not startup my samsung galaxy s anymore. It stops while displaying the samsung logo. I think there is no (working) booting system available anymore.
- I can start the recovery mode (2e).
- I can start the download mode.
In the recovery mode I can only use update.zip. This is no option because I can not enter the root to put an update.zip file there. Is there a way to get update.zip to the root (internal sd) or is there a firmware which support an external micro-sd card. Or maybe there is a program which can recover my galaxy s. A this moment it looks like my phone is broken.
Is there anyone who know a solution for this problem?
Please please help me!
Thanks for your reply!
Martijn
akaskriller.com
Hi Martijn,
I'm assuming you're using a stock firmware (nothing fancy like DocRom, Darky, etc.)
Since you can enter download mode you could use Odin and try to flash a firmware.
If you can remember what firmware you currently are using my guess would be you might actually keep your data.
Try samfirmware.com, register en download the right one. There are a lot of flash-guides you might want to read before you begin.
Sincerely yours,
Jeroen.
Thanks for your anwsers! I found the solution for my problem on this site (Dutch):
Replace the first three words... (World wide web).androidworld.nl/forum/samsung-galaxy-s/8866-how-froyo-2-2-i9000xxjpp-27-10-10-firmware-speedmod-froyo-341mb-ram.html
Step 1 -9 fixed my phone!
1.This process takes at CWM mode
2.This process only used by japan's SC-02F&SCL22
3.this process can wipe cache and data
the chinese link （中文用户请访问）：http://bbs.romup.com/thread-74493-1-1.html
romup said:
1.This process takes at CWM mode
2.This process only used by japan's SC-02F&SCL22
3.this process can wipe cache and data
the chinese link （中文用户请访问）：http://bbs.romup.com/thread-74493-1-1.html
Click to expand...
Click to collapse
Hi
i can't load SC-02F_CWM_EN.tar and SCL22_CWM_CHS.tar
please upload to other host.
Thank
Hi I'm a noob at this, can someone please give advice on what I'm supposed to do with the SC02F_ROOT.7z file? I can't seem to unzip or uncompress it.
Can you explain step by step how to root SCL22 please ?
Yes I also join to explanation request. Live in japan, want to buy and root that SCL22 model.
The provided n first post link is in Chinese, and it has some file downloads which are not downloadable. Would someone post them here, or explain what to do with the file that is attached to first topic
Please!!!
It is a custom system image to root of odin in the SCL22 of Japan
Su is enabled at startup
System status official
Felica is enabled.
Felica is valid.
custom image is Here.
h ttp://www1.axfc.net/u/3168553
Galaxy J SC-02F
Hello , i have a Galaxy J SC-02F SIM-locked in Docomo.
I have followed the steps above and flashed the CWM from the chinise forum ... after translating ,, registering and posting !!! in the forum.
otherwise i could not download anything.
Now i have the *7z file from the first post and the CWM recovery installed , but the phone is not rooted yet.
I have no idea how to root it with the 7z file.
It sais something about booting into CWM and the connect to USB .... in CWM ?!? .... but next step
to flash it from the PC i have no clue.
Next problem is how could i unlock the SIM .... eventually first region unlock and then SIM.
Is the Supersu dedicated to the phone model ?
Can i use the supersu from Japan Note 3 ?
Please help , i am not the bloodiest noob but not very advanced either.
Thank u in advance
Dintisor said:
Hello , i have a Galaxy J SC-02F SIM-locked in Docomo.
I have followed the steps above and flashed the CWM from the chinise forum ... after translating ,, registering and posting !!! in the forum.
otherwise i could not download anything.
Now i have the *7z file from the first post and the CWM recovery installed , but the phone is not rooted yet.
I have no idea how to root it with the 7z file.
It sais something about booting into CWM and the connect to USB .... in CWM ?!? .... but next step
to flash it from the PC i have no clue.
Next problem is how could i unlock the SIM .... eventually first region unlock and then SIM.
Is the Supersu dedicated to the phone model ?
Can i use the supersu from Japan Note 3 ?
Please help , i am not the bloodiest noob but not very advanced either.
Thank u in advance
Click to expand...
Click to collapse
You can use SC01F's rooting method.
See http://forum.xda-developers.com/showthread.php?t=2482672
notice. you can't use SC01F' rooted rom!
you need to make rooted system form SC02F official ROM by yourself.
Thank you.
Root SC-02F
ma34S said:
You can use SC01F's rooting method.
See http://forum.xda-developers.com/showthread.php?t=2482672
notice. you can't use SC01F' rooted rom!
you need to make rooted system form SC02F official ROM by yourself.
Thank you.
Click to expand...
Click to collapse
Thanks for the answer ,
I have already CWM recovery installed and it works to boot into it and also making the stock ROM backup. So I can install zip files through CWM. I ve installed " update SuperSu 1.65 zip" and by reboot ask to CWM to root the device.
Now when I open the SuperSu App it wants to update but it cannot in normal mode and asks me if I want to try in CWM .... I really would if I had
a decent SuperSU zip-file to do this... compatible to my phone.
Strange is that Titanium Backup gets root power but any other apps as ROM Manager or ROOT Explorer don't.
The info u gaved me with the SC01F means a total different method with other apps and software to install and I feel like being only half on the way too completely root the device .
Actually I would like an advice from this point ..
Thank u in advance
Samsung rom inluding root process garden.
You must bypass it.
Sent from my SC-01F using XDA Premium 4 mobile app
ma34S said:
Samsung rom inluding root process garden.
You must bypass it.
Sent from my SC-01F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nice . but how ? I am about to install the system file u pointed in the tutorial from SC01F .
Is my device going to wake up with the system file from the tutorial??
---------- Post added at 02:24 AM ---------- Previous post was at 01:44 AM ----------
I have just did the tutorial and reboot the device.
It is not working .. the system file in the tutorial is proper to note 3 devices and on my device gives errors
from Pen -input ... etc ..
Can u explain how to use the ROOT_SC="F.7z file in the first post ?
Thank u ..
Dintisor said:
Nice . but how ? I am about to install the system file u pointed in the tutorial from SC01F .
Is my device going to wake up with the system file from the tutorial??
---------- Post added at 02:24 AM ---------- Previous post was at 01:44 AM ----------
I have just did the tutorial and reboot the device.
It is not working .. the system file in the tutorial is proper to note 3 devices and on my device gives errors
from Pen -input ... etc ..
Can u explain how to use the ROOT_SC="F.7z file in the first post ?
Thank u ..
Click to expand...
Click to collapse
1. Download SC02FOMUBNB3 from sammobile.com http://www.sammobile.com/firmwares/3/?download=26431
2. Download make_rooted_system tool from github https://github.com/kbc-developers/make_rooted_system/releases
3. (In linux PC) adding stock rom' files
(dir)
├ bin/
├ config/
├ img/
│ └SC02F
│ ├cache.img <- adding from SC02FOMUBNB3
│ └system.img.ext4 <- adding from SC02FOMUBNB3
├ sed/
│ readme.txt
├ install_su
├ make_rooted_factoryfs.sh
└ user_custom.sh
4. run "make_rooted_factoryfs.sh" in terminal
-> rooted system is in out/SC02F directory
5. flash rooted system by using Odin3
it is possible to change in CWM if CWM install first.
but I don't prepare it, because I want to use felica.
if you want, make cwm.zip yourself from make_rooted_system's binaries and scripts.
@Dintisor
Sorry I'm not well English.
At first,
"su" and "busybox" is delited by /init at boot time.
this is the reason , you couldn't get root.
so you need copy it from anywhere at boot time.
/system/bin/kiesexe or /systembin/mfescand called by init on root.
replace it to custom script.
and then,
you can get rooting at every boot.
Galaxy SC-02F
Thank you very much guys.
I am not so good to cook myself a rooted ROM
Beside I only have Windows machines not a Linux one
I've managed to root the device using CMD
and the SC02F_ROOT.7z in the first post of this thread.
After that I used Region Unlock 1.3 from chainfire and its working perfect
on Calls , SMS and mobile data in Europe.
But I don't have MMS , Video Calls and SMS delivery report options.
I have also a SimToolkit proper to my mobile provider wich is not shown in the apps.
All this above options are available on my mobile network just don't know how to
make them enabled on this device. Eventually if I have to flash a new radio if is somebody
nice to explain what radio could I flash , maybe compatibles from Note 3 Asia devices.
Thank you
hi
Dintisor said:
Thank you very much guys.
I am not so good to cook myself a rooted ROM
Beside I only have Windows machines not a Linux one
I've managed to root the device using CMD
and the SC02F_ROOT.7z in the first post of this thread.
After that I used Region Unlock 1.3 from chainfire and its working perfect
on Calls , SMS and mobile data in Europe.
But I don't have MMS , Video Calls and SMS delivery report options.
I have also a SimToolkit proper to my mobile provider wich is not shown in the apps.
All this above options are available on my mobile network just don't know how to
make them enabled on this device. Eventually if I have to flash a new radio if is somebody
nice to explain what radio could I flash , maybe compatibles from Note 3 Asia devices.
Thank you
Click to expand...
Click to collapse
bro how did you manage to root this phone ?
Can you add SC-02F_CWM_EN.tar ?
Thanks !
http://www.mediafire.com/download/nmwhx2iyd50wheo/SC-02F_CWM_EN.rar
http://www.mediafire.com/download/zf862cu5ggasr2u/SCL22_CWM_CHS.rar
http://www.mediafire.com/download/i20mdr5f7398c97/UPDATE-SuperSU-v2.01.zip
How To Root Samsung Galaxy Note 3
How To Root Samsung Galaxy Note 3 SCL22 au by KDDI (JAPAN phone) 100% working.
Quote:
My phone details (Tested devise)
Samsung Galaxy Note 3 SCL22 AU by KDDI (JAPAN phone) SM-N900J
Android Version - 4.4.2
Baseband Version - SCL22KDU2FNF7
Kernel Version - 3.4.0-1990145
This is all the stuff you need to Root your phone -
01. Kies3Setup.exe
02. ODIN 3.07 (Do Not Use 3.09)
03. UPDATE-SuperSU-v2.35.zip
04. hltedcm-KK-KBC-CWM-v6.0.5.0_r0-recovery.tar
05. CWMrecovery-scl22kk.tar
06. Stock firmware - (for that you need to register and download the stock kernel from sammobile. you better download it just in case )
DOWNLOAD LINKS -
01.hltedcm-KK-KBC-CWM-v6.0.5.0_r0-recovery.tar - https://mega.co.nz/#!1FI3xICS!7Un6z5...8GUZMkxkAwa7n4
02.02.CWMrecovery-scl22kk.tar - https://mega.co.nz/#!FZoEAbxC!j_l24G...3Vl63DHMSThuwE
03.twrp.tar - https://mega.co.nz/#!wd5Ama5b!33WccV...a6F0uHlBf_CVRE
04.SuperSU.rar - https://mega.co.nz/#!xY5CBJ4Y!NCN_DL...7l0b5P7UmaesyA
Quote:
(This file comes with a RAR format so extract it and inside that folder you can see UPDATE-SuperSU-v2.35.zip file )
05.Odin307.zip - https://mega.co.nz/#!Bd5x0CzC!UavXZ3...nWex3ECZ_mH8LI
01.Connect your phone to PC and copy and paste UPDATE-SuperSU-v2.35.zip to phone SD card
02.Start Odin 3.07
03.Put your phone to Download mode
04.Flash the hltedcm-KK-KBC-CWM-v6.0.5.0_r0-recovery.tar
05.Flash the CWMrecovery-scl22kk.tar
06.Start your phone then put it to Recovery mode and install UPDATE-SuperSU-v2.35.zip
07.Start your phone in normal mode. And now you all set and ROOT.
FINISH.!
Enjoy your rooted phone.!
Is this not posted in the wrong section? This is only supposed to be for the Note 3 (N9005 Snapdragon).
Hey my friends!
I'm really really thankfully our kind member: adfree who helped me yesterday to unbrick my watch, which had no wifi enabled, so I was totally desperate I lost 300 pounds. So as a thanks I'd like to give back some for this community. I bought the newest ROM, I'd like to share it with you guys.
I share the R770XXU2BQC5 with you.
I uploaded it to OneDrive, please feel free to download it.
Download R770XXU2BQC5
Please note this ROM is for SM-R770 Gear S3 Classic
Installation process:
(Many thanks for se47)
For flashing need NetOdin: https://1drv.ms/u/s!AiN2zfzVljOkgfNqAmRV7_n54YOdgQ
Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."
Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.
Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.
Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"
Step 5: Choose the Access point with the same name appears on your S3.
Step 6: Your S3 will show that it's been connected to the IP of your computer.
Step 7: Open the Odin, your S3 will show up.
Step 8: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
Enjoy
P.S.: I would also like to mention how I unbricked my Gear S3 (Many thanks for BokkieAndijk)
... i found info how to get my S3 back to live again. If you have the same problems with your (bricked) S3 then go to download wirelessly mode en as soon as you see the flower then push the power button 2 seconds en let it go for 1 second, than push it again for 2 seconds en let it go for one and so on til you get him in to download wirelessly mode. May take some attempts but it saves my ass a few times.
Click to expand...
Click to collapse
Success!! R770X changed to R770 with BQC5 firmware!
I can confirm that BQC5 firmware works on my R770X! I now have a fully functioning Gear S3 Classic and it now states R770 with no X at the end. After all the files loaded on NetOdin the watch restarted with French being the only language. Luckily I do Read\Hear\Write it so I went through the process of connecting the gear through the Gear Manager on my S7 Edge and it connected perfectly and then it changed the language to English!
Upon my web search I noticed that the stores where using S7 Edge's to install the Retail Mode app on the watches so I figured that they were retail watches and that meant it was installing\changing the firmware with an X at the end only to differentiate and grab the correct OTA updates. It made sense because when I temporarily disabled Retail Mode within the app itself all the antennas worked (Bluetooth, Wi-Fi, Location and NFC) so I knew I had a chance that a stock firmware might work.
I hope this helps out anyone else in my situation. I followed the post with the BQC5 and used those files to accomplish this.
Thank you adfree for all your great help. And also xedamen for your tutorial post. Without both your help & guidance I would have stared at a very expensive watch show me the wrong time.
Repost from the other thread. (Sorry, I don't know if that is how it's done).
vivalalibertad said:
Success!! R770X changed to R770 with BQC5 firmware!
I can confirm that BQC5 firmware works on my R770X! I now have a fully functioning Gear S3 Classic and it now states R770 with no X at the end. After all the files loaded on NetOdin the watch restarted with French being the only language. Luckily I do Read\Hear\Write it so I went through the process of connecting the gear through the Gear Manager on my S7 Edge and it connected perfectly and then it changed the language to English!
Upon my web search I noticed that the stores where using S7 Edge's to install the Retail Mode app on the watches so I figured that they were retail watches and that meant it was installing\changing the firmware with an X at the end only to differentiate and grab the correct OTA updates. It made sense because when I temporarily disabled Retail Mode within the app itself all the antennas worked (Bluetooth, Wi-Fi, Location and NFC) so I knew I had a chance that a stock firmware might work.
I hope this helps out anyone else in my situation. I followed the post with the BQC5 and used those files to accomplish this.
Thank you adfree for all your great help. And also xedamen for your tutorial post. Without both your help & guidance I would have stared at a very expensive watch show me the wrong time.
Repost from the other thread. (Sorry, I don't know if that is how it's done).
Click to expand...
Click to collapse
Nice, it's good news for those who needed
Thank you for a guide and ROM.
What is the country origin of this ROM?
I have the same ROM version installed on my watch and wonder if reflashing could help with SPay (watch was purchased in a country where SPay in not supported) by changing CSC.
Firmware package for OXA region contains more then 1 CSC/Country/Sales Code....
Simple download Firmware and extract files with 7Zip from CSC.
To detect which Sales Code is ACTIVE on your device... look here:
https://forum.xda-developers.com/showpost.php?p=73265182&postcount=68
Only as info.
Best Regards
Hi, thank you for your reply.
As I understand OXA contains several countries.
Is there a way to change country of sales, I need to change it from Ukraine to Sweden?
Thank you.
Is there a way to change country of sales, I need to change it from Ukraine to Sweden?
Click to expand...
Click to collapse
Yes.
But it is not really easy nor very safe...
You need ROOT access... and at the moment only Combination Firmware offer this...
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r770-t3584402
And their is no 1 click instruction available...
Caution!
I have my own experience only with SM-R732... and some feedback with SM-R760...
So you are at your own with SM-R770...
Risk to brick your device...
Best Regards
I wonder why it doesn't work after reflashing new rom and csc. I understand that OXA is multi region, but wouldn't it work after reflashing non-OXA CSC/rom and back...
If you unpack Firmware and concentrate your eyes on csc.img... use 7Zip for extraction...
Then you can see several folders...
Example DBT for instance...
Code:
DBT
SER
XAR
.
.
.
MANY more countries/Sales Codes supported...
If this text string aka Sales Code is written into your Gear... then device is AUTOMATIC configured for DBT...
I mean this CSC/Sales Code or how ever you want call it... is NOT new since Gear Wearables...
This is since years used mechanism for Samsung handsets...
You could try to google...
Best Regards
Hi adfree!
What do you mean "automatically configured to DBT"?
MeLCORE711 said:
Hi adfree!
What do you mean "automatically configured to DBT"?
Click to expand...
Click to collapse
Feel free to ask me in German.
My English is very limited...
I mean device is doing all configuration WITHOUT ask you... by reading some Settings stored on device...
automatic/self configuration vs. you can choose/select
Best Regards
Hi, your English is good, much better than my German This mechanism of automatic assignment is interesting, I wonder if somebody has found this out.
I think I was reading a thread on forums that people were reflashing different roms and eventually it worked out to change an origin country but it seems like a random process.
Do you know if rom change need a root?
I think I was reading a thread on forums that people were reflashing different roms and eventually it worked out to change an origin country but it seems like a random process.
Do you know if rom change need a root?
Click to expand...
Click to collapse
We could try to learn together.
Step by step.
First good idea is to start from scratch... at the beginning...
Lesson 1.
Download Firmware
Lesson 2.
Unpack with Tool called 7Zip...
2.1
Unpack/extract files from csc.img with 7Zip
3.
Now click through folders and look into folder:
Code:
preconfig\
Tell me what you can see...
Best Regards
adfree said:
We could try to learn together.
Step by step.
First good idea is to start from scratch... at the beginning...
Lesson 1.
Download Firmware
Lesson 2.
Unpack with Tool called 7Zip...
2.1
Unpack/extract files from csc.img with 7Zip
3.
Now click through folders and look into folder:
Code:
preconfig\
Tell me what you can see...
Best Regards
Click to expand...
Click to collapse
I will do that tonight.
Yesterday I flashed ROM/BL/CSC from the post header. Default country on my watch hasn't changed (default language is still Ukrainian, no SPAY either)..
Default country on my watch hasn't changed (default language is still Ukrainian, no SPAY either)..
Click to expand...
Click to collapse
Pasdrawlaju tebja. :good:
Again.
This Firmware is for all countries... for model:
Code:
SM-R770
Gear S3 is NO model name... it is """pet name""" and irrelevant as more then 1 model exists...
Code:
SM-R760
SM-R770
SM-R765 and few more variants of...
.
.
.
In Computer world we have only 0 or 1... and it is better to be Byte exact.
So there are BIG difference between:
Code:
o
O
0
Looks similar or same for as humans... but in Computer world these are exact 3 different Chars...
Back to Samsung handset/wearable...
They differ through CSC blablaba crap...
Few examples...
Code:
XAR is US
DBT is Germany
SEK is Ukraine and inside csc.img
SEK is visible in Product Code... if you concentrate your eyes on it...
http://www.samsung.com/ua_ru/wearables/gear-s3-classic-r770/
Code:
SM-R770NZSA[B]SEK[/B]
These 3 Chars are written into Wearable/handset... and are not ever easy to change...
But you have to change inside your device...
Firmware will NOT help you...
SPay crap is not 100 % clear to me, how it work...
If it need an chain...
Like XAR Sales Code in all 2 devices...
Handset + Wearable...
First attempt would be to change your SEK Sales Code to XAR...
It is only theory... I hope XAR is Samsung Pay supported country number 1... because USA
But Samsung Pay is not really interesting for me...
Sales Code is also important if I want to play with Firmware...
Btw... if you unpack all files from Firmware... rootfs.img... then you will find Samsung Pay TPK inside...
Best Regards
Rookie question, CSC file is zipped, then md5, then img.
If I edit one of the files in .img, how do I pack it back to iso and then to md5?
Also can I flash it to the watch without root, knox change etc.?
In preset folder there is nothing than language preset.
MPS folder has some customer settings which are more interesting.
If I edit one of the files in .img, how do I pack it back to iso and then to md5?
Click to expand...
Click to collapse
Be care fully...
1.
This is "special" TAR Format...
You can "ignore" MD5... this is only for selfcheck... to prevent damage TAR file...
2.
csc.img is an Image of an Linux partition...
Extraction is easier as create valid csc.img with Windows...
Better under Linux mount blabla...
3.
Fnimanie!
Gear S3 is not really Modding friendly...
Higher Security as in Gear S2...
Risk to end up in Bootloop and disabled WiFi...
Best Regards
Has anyone managed to change the area code on your Gear S3? I need to use Samsung Pay and hand it on.
Does anyone know tell me how to change the firmware of Samsung Gear S3 so that it accesses the Samsung Pay app? Has anyone ever succeeded?
Samsung Gear S Smartwatch SM-R750
Hi, am looking for a way to fix and or change my firmware on my SM-R750 Samsung Gear S which was purchased From Hong Kong and to change it to Canada. can anyone please help with this? thank you.
Please let me know if this is the wrong section for this question.
So I have a rooted phone that was originally on straight talk, i had to flash a verizon firmware to it cus i couldnt find straight talk firmware, so now technically it's a SM-G930V and i was using roehmsoft ram expander to try getting more ram from my SD card. Well, it said that I need to check my card's read and write perms, so i looked around on google and i tried setting the perms inside and i made platform.xml rw--r--r (644)
when i opened root browser it says my root directory is 85% filled (0.7gb / 5.00) so i figured i'd reset my phone even though i figured that wouldnt do anything, it didn't. It still says my root directory is 85%full and its making my device lag. I'm not sure what the hell I did, but I REALLY need some help, I would really appreciate it.
(by the way, I thought roehmsoft might have created the swapfile.swp in the root directory, but after a search nothing comes up, so i'm not sure if that's the problem.)
Codydupre1 said:
Please let me know if this is the wrong section for this question. So I have a rooted phone that was originally on straight talk, i had to flash a verizon firmware to it cus i couldnt find straight talk firmware, so now technically it's a SM-G930V and i was using roehmsoft ram expander to try getting more ram from my SD card. Well, it said that I need to check my card's read and write perms, so i looked around on google and i tried setting the perms inside and i made platform.xml rw--r--r (644). when i opened root browser it says my root directory is 85% filled (0.7gb / 5.00) so i figured i'd reset my phone even though i figured that wouldnt do anything, it didn't. It still says my root directory is 85%full and its making my device lag. I'm not sure what the hell I did, but I REALLY need some help, I would really appreciate it. (by the way, I thought roehmsoft might have created the swapfile.swp in the root directory, but after a search nothing comes up, so i'm not sure if that's the problem.)
Click to expand...
Click to collapse
The XDA Forum does have a device dedicated area for the Samsung Galaxy S7 here:
Samsung Galaxy S7 Device Dedicated - XDA Forum
With that stated... The following threads may be of help to you. Your more likely to receive an answer from a member who also has the same device.
OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S7 SM-G930F by henklbr
Unlock Bootloader SM-G930VL ( straighttalk ) by Adaken13
I wish you the best of luck!
______________
PLEASE NOTE: I welcome any member to help with further valuable information/clarification for any of my posts.
Bootloader warning ⚠After the unlock of the bootloader, you have probably noticed the logo has been replaced by a Warning message...
Here is the solution to remove Bootloader warning Unlocked message from your Galaxy Tab S6 lite.
What you need?
Your device.
Terminal (termux recommended).
Magisk patched recvory (you just need root for one time).
Steps to follow to fix Bootloader Unlocked Warning issue :
Download the Param file and move it to download folder (internal storage).
Download terminal (you can use termux).
Start terminal and gain root access using "su".
Type / copy this command into the terminal -
dd if=/storage/emulated/0/Download/up_param.tar of=/dev/block/platform/13520000.ufs/by-name/up_param
Now simply reboot to recovery or system.
Mission accomplished.
Download(in this case the param file is only for Samsung Galaxy Tab S6 Lite, if you want it for your device message you may comment below)Splash screens for other devices :
Galaxy M30s
Galaxy A12
Galaxy Tab A7 Lite
Galaxy A22
If you want it for your device comment below..
Conclusion :In this post I have talked about How to remove bootloader warning. Tell us What You Say About The Post by commenting and if you have any questions then comment below.
Thanks but I would rather say this is not a 'removal' solution but a replacement of the warning boot images.
And this could be done by simply opened 'up_param.bin' file with any zip program or 7zip. Extract those warning files, edit it to your own preferences or simply edit/replace supposed image files.
7GHz said:
Thanks but I would rather say this is not a 'removal' solution but a replacement of the warning boot images.
And this could be done by simply opened 'up_param.bin' file with any zip program or 7zip. Extract those warning files, edit it to your own preferences or simply edit/replace supposed image files.
Click to expand...
Click to collapse
Yea i know ryt, I've did the same way buddy!
Pizza upload for galaxy tab a7 wifi
Can you upload it for SM-T220 - Galaxy Tab A7 Lite (2021 8.7")? The site you linked to says it works for any Samsung device, just need to modify `up_param.tar`, but doesn't say what needs to be changed with that file or where it is. I can only find `up-param.bin.lz4`.
@Smoochkiller
@lightmastertech
you can quickly do that on your own and flash the tar file with odin
Can you upload it for SM-T865 samsung galaxy tab s6 LTE
THANK YOU
Smoochkiller said:
Pizza upload for galaxy tab a7 wifi
Click to expand...
Click to collapse
Send me your bl folder on telegram @raza_sayyed I'll edit the param file
lightmastertech said:
Can you upload it for SM-T220 - Galaxy Tab A7 Lite (2021 8.7")? The site you linked to says it works for any Samsung device, just need to modify `up_param.tar`, but doesn't say what needs to be changed with that file or where it is. I can only find `up-param.bin.lz4`.
Click to expand...
Click to collapse
Ohh okay I'll make another guide regarding how to modify the param file
Also if you want it for your device just msg me on telegram with your bl folder
It has worked very well for me...
Thank you so much for everything.
All the best.
lestatmail said:
It has worked very well for me...
Thank you so much for everything.
All the best.
Click to expand...
Click to collapse
Most welcome mate
You may join my telegram group @razsoriginals for more such guides
My tablet isn't turning on after updating the up_param, it turns on, but it immediately turns off itself, I can just see the first Samsung logo, any idea how can I fix this @razs.originals ?
nobby_nobody said:
My tablet isn't turning on after updating the up_param, it turns on, but it immediately turns off itself, I can just see the first Samsung logo, any idea how can I fix this @razs.originals ?
Click to expand...
Click to collapse
Flash stock
May be while downloading the param file it might be corrupted
wen a71
Someone on here made an Odin flashable boot warning that removed all the writing. Wish i could find it again i had it before upgrading to lineage 19
Found it on my pc, wish i could give credit to whomever made it.
Hey! Any chance of this for the Tab A 10.1 2019? (gta3xlwifi), or at least how you did this, and I can do it myself, please? Thank you!
Can you explain me a safe way to do this for A22 5G? It has up_param and param. up_param has images but I don't know how to pack it as a .bin file
please for tab S6