Judo Chop! Kernel for Galaxy Tab E 9.6 SM-T560NU (Snapdragon 410)
** BY FLASHING THIS KERNEL YOU ASSUME ALL RISKS TO YOUR DEVICE!!!
** BOOTING WITH THIS KERNEL INSTALLED WILL TRIP YOUR KNOX COUNTER AND MAY VOID YOUR WARRANTY
** PRACTICE SAFE FLASHING AND BACKUP YOUR DEVICE WHILE YOU CAN
** HAI KARATE SEZ: BE CAREFUL HOW YOU USE IT!
This kernel is for the Samsung Galaxy Tab E 9.6 SM-T560NU (Qualcomm Snapdragon 410) running TouchWiz Marshmallow 6.0.1. It is based on the T560NUUES1BPL1 source code, and most of the features were ported from corsicanu's hadesKernel 2.5 source code. The vast amount of the credit for this should go to him and, by extension, to those who contributed to his kernel.
After comparing my Tab E 9.6 with my wife's Tab A 8.0 and seeing the Tab E's woefully inferior colour fidelity, I set out to compile a permissive kernel with KCAL support (I bump the saturation up to 40, by the way) but when I found corsicanu's source code I incorporated as many of his features as I could.
Some supported features:
KCAL colour calibration
Adreno Idler 1.1
USB fast charge
intelli_thermal 3.0
Powersuspend
Prima WLAN driver
SELinux permissive
init.d support
Frandom
ZEN/SIO/FIOPS IO schedulers
ADB insecure
DM-Verity disabled
Various optimizations
Compiled with Uber Toolchain 4.9
Sorry, this kernel DOES NOT and CAN NOT support the Spreadtrum-based SM-T560. The architecture is completely different.
Kernel Adiutor is the only app I have tested for adjusting the various settings of this kernel.
To install, download the .zip file and flash it in your custom recovery of choice. I have only tested this with the TWRP 3.0.2-0 version created by ashyx.
May 9, 2017: Initial public release 1.1
Source code:
https://github.com/Hai-Karate/Judo-Chop-Kernel-for-T560NU
Related
This Kernel is based on the previous work of @AndreiLux and @halaszk88 on N910C
/* Changes Under-The-Hood since perseus-halaszk-V2.2
Built with UBERTC 6.x, -O3 and more optimization flags
Latest Linux Kernel 3.10 merged
Latest SM-N910C Kernel source and Ramdisk(DPJ4) merged
Important patches from Google's android/kernel_common merged
Misc performance-related patches for ARM backported from Linux mainline
RNG driver and exynos-rng backported from Linux mainline and Galaxy S7
90% of CFS scheduler, cpuidle driver and related parts backported from Linux 4.4
Workqueue backported from Linux 4.4 with power-efficient patches from Linaro enabled
HMP scheduler related changes backported from Galaxy S7
"interactive" governor backported from Galaxy S7 merged with @arter97's patches as the default and only CPU governor
"Maple" I/O scheduler by @frap129 set as default
Input booster driver backported from Galaxy S7
GPU driver Mali T7xx R7P0 from Galaxy A8(2016) merged
Thermal driver from Galaxy Note5 partly merged
CPUSet enabled with better setup and merged @arter97's invisible cgroup patch
Samsung DVFS-related and Hotplug driver patches from @arter97 merged
Tweaked CPU and GPU clock table for better performance
Slightly rewrite Wakelock Controller for better performance
More Linux and Samsung's debugger removed/disabled
Reverted lots of changes that seems unnecessary or redundant IMO
*/
/* Changes in Synapse
Removed Governor section since now we only have one usable governor
Removed HMP section, I've hardcoded and reverted some stuff, so this is unnecessary.
Removed CortexBrain from ramdisk and synapse.
Removed Charger Control in battery section for now
Removed Sound Control and Thermal Control , unnecessary.
*/
/* Thanks To And Credit */
Editing...
*/
/* Disclaimer
Editing...
*/
/* Download
Uploading...
*/
/* Source Code
Uploading...
*/
XDA:DevDB Information
[Thread Closed][Kernel] The Last Drops of N910C, Kernel for the Samsung Galaxy Note 4
Contributors
Frank.G
Kernel Special Features:
Version Information
Status: Testing
Created 2016-11-17
Last Updated 2016-11-18
Reserved.
Reserved #2.
omg i m ready. ejaculate those last drops of n910c.
we needed this, thanks
noooooooooooooo xD
still uploading? btw can you make n5/n7 port variant? since dn7 came out this should be the perfect kernel for it
im sure you know how to do it
Deleted
I think he is dead while uploading. Life is short my friend so rest in peace.
Do not upload more sorry for my test
Atlast my buddy.. Cogratulations! Im so glad about this..
Thread closed at OP request.
The OP is not going to release this work anymore.
Regards,
Wood Man
Forum Moderator
"ZenFire Kernel"This is my "ZenFire" for the 2015 Moto G Turbo, codenamed Merlin. shares a common codebase with my kernels for surnia and lux. It consists of the latest Motorola MSM8916 kernel, with all the latest changes from CodeAurora and Kernel.org merged in, along with select cherry-picks and additions of my own. Flash it using TWRP. Bug reports and contributions are welcome.
Features:
Updated to Linux 3.10.108
Updated f2fs and WiFi drivers
Added CPU hotplug
alucard
bricked
Mako Hotplug
msm sleeper
KCAL MDP5 colour control
Improved zRAM management
DT2W (Full & Half)
IO Schedulers(cfq, bfq,fiops & tripdroid)
Power Suspend
Added Govs
alucard
darkness
elementalx
lagfree
blu_active
tripndroid
yankactive
cultivation
CPU Input Boost
Improved memory management
Improved storage performance
optimized configuration
Some Security updates and optimizations
What are the supported Roms ?
Kernel supports All Nougat Roms like ( LOS-14.1 , AEX, and others)
Kernel supports also All Oreo 8.0 & 8.1.0 Roms like ( LOS-15.1 , AEX, and others)
Kernel Support All PIE 9.0 roms (LOS16, Pixel exp. .....)
Downloads:
Zenfire Kernel For Merlin
NOTE
Till now just work on Moto G3 turbo[merlin].
Zip file contains O & N kernels and the script auto decide depends on rom version which file to chose.
If there is any bug please report here with logcat and dmesg to help us fixing this bug.
XDA:DevDB Information
ZenFire Kernel, Kernel for the Moto G 2015
Contributors
ArcherTanu, Alberto97 , @ki, @hritikutekar,@ishubhamsingh,@althafvly,@Chil360,@squid2,@franco
Kernel Special Features: alucard,darkness,elementalx,blu_active,lagfree,Mako Hotplug,tripdroid,fifo
Version Information
Status: Beta
Created 2019-06-25
Last Updated 2019-06-27
First thanks for your efforts?.
Can I get recommended balanced profile because i am not a advanced user
One more thing,
Bro there is something wrong with thread seeing multiple threads with same name & none of them are opening in xda labs app.
sanju455 said:
First thanks for your efforts?.
Can I get recommended balanced profile because i am not a advanced user
One more thing,
Bro there is something wrong with thread seeing multiple threads with same name & none of them are opening in xda labs app.
Click to expand...
Click to collapse
Im using alucard gov n hotplug..
For gaming use elementary gov..
I think blu_active is one of the best balance gov.. But i prefer alucard.
ArcherTanu said:
Im using alucard gov n hotplug..
For gaming use elementary gov..
I think blu_active is one of the best balance gov.. But i prefer alucard.
Click to expand...
Click to collapse
does it work with android 10 rom. pls reply
DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I have the full right from the owner of Cronos, to modify, customize and distribute the current kernel under different name.
Modifying and re-uploading this kernel distribution is not allowed.
INFO:
KRAKEN is a friendly oriented project for powerful users and gamers.
KRAKEN supports Project Spaget and OneUI ROMs.
Android Version Support:
Android Pie
Android Q
COMPATIBLE VENDORS [ARM64] :
ARM64 for A3x 2017 by @Astrako
ARM64 for A6x 2018 by @ShaDisNX255
ARM64 for J6x 2018 by @ShaDisNX255
ARM64 for J5x 2017 by @ananjaser1211
ARM64 for J7x 2017 by @ananjaser1211
SUPPORTED DEVICES:
A320x
A600x
J530x
J600x
G610x
J701x
J710x
J730x
FEATURES:
KERNEL:
Based on J530FXWU5CSH7 source
Upstreamed to Linux 3.18.140
Compiled with Linaro's GCC 7.5 Toolchain (2019.12)
Compiled with -pipe, -funroll-loops (GPU), -ffast-math (GPU), -O3, ARM related hardware GCC optimizations and graphite optimizations
Permessive SELinux
Fake KNOX Warranty Status (0x0)
Optimized for Performance
Fast boot (Increased cluster booting frequency)
Heterogeneous Multi-core Processing (PORT from Exynos 7904)
Mali: r29p0 driver (A600FNXXU5CTB9)
Custom Voltage Control (CPU/GPU/MIF/CAM and more)
Dynamic FSync (FSync ON/OFF)
Samsung's LPM (Treble)
ARM32/64 Ready (Treble and OneUI)
HOTPLUG:
Samsung's Hotplug (disabled)
CLOCKS:
OSCCLK frequency up to 27 MHz (FSB)
CL0 frequency up to 1.75 GHz (Small Cluster)
CL0 frequency down to 343 MHz (Small Cluster)
CL1 frequency up to 1.86 GHz (Big Cluster)
CL1 frequency down to 343 MHz (Big Cluster)
G3D frequency up to 1040 MHz (GPU)
G3D frequency down to 343 MHz (GPU)
BUS frequency up to 1937 MHz in dual-channel (RAM)
BUS frequency up to 968 MHz in single-channel (RAM)
MIF switching frequency up to 902 MHz (DEVFREQ)
CAM rebooting frequency up to 533 MHz (DEVFREQ)
TMU (Exynos Thermal Management Unit):
Increased thermal limits for CL0 (Small Cluster)
Increased thermal limits for CL1 (Big Cluster)
Increased thermal limits for G3D (GPU)
DVFS (Dynamic voltage and frequency scaling):
CPU: disabled
GPU: disabled
TCPs:
westwood (default)
bic
cubic
htcp
reno
I/O's:
bfq (default)
noop
deadline
row
cfq
maple
fifo
fiops
sio
sioplus
tripndroid
vr
zen
GOVERNORS:
interactive
interactives9 (default)
blu_active
cafactive
impulse
ondemandplus
bioshock
dancedance
electrodemand
hyper
intellidemand
smartass2
pegasusq
ondemandx
wheatley
thunderstorm
VARIOUS:
Boeffla Wakelock blocker
Powersuspend
WireGuard
Power Efficient workqueues
Ultra Kernel Samepage Merging
Butterizer
ROOT:
KRAKEN doesn't come with Magisk support, but you can manually download and install it from here: Magisk v20.3
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for developing without a device and for the struggle to test new things.
@ananjaser1211 for making this whole thing possible with his amazing work on HeliosPie.
@corsicanu for his great contribution to HeliosPie.
@Astrako for being the first one to test KRAKEN on his A3.
@LelMwhLwl for testing every single kernel image provided by me on his J5.
@kique119 for testing almost every single kernel image on his J7, for including me in his documentation and for the huge boost on what I am doing.
@Me2 for testing many of the provided images.
Thanks to anyone else who made this whole thing possible but it's not included, you are part of it as well!
XDA:DevDB Information
KRAKEN-Kernel for Galaxy Exynos 7870 devices, Kernel for the Samsung Galaxy A3/J5/J7/A6/J7 2017/2018
Contributors
SPARTANICUS, ananjaser1211
Source Code: KRAKEN
ROM OS Version: 9.x +
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Pie Bootloader
Version Information
Status: Stable
Current Stable Version: RC15
Created 2019-08-13
Last Updated 2020-03-27
DOWNLOADS:
Stable Releases
INSTALLATION:
Download the provided KRAKEN-Kernel-VERSION-universal7870-OS-DATE.zip file, place the file in your internal storage or sdcard.
Boot into your recovery, find the "KRAKEN-Kernel...".zip package and flash it.
The package will detect your device and it will flash the right kernel for your device. After the flash was successful you can reboot your device.
Thread is updated, there's also a new KRAKEN version! Enjoy it and report problems as usual.
The overclocking feature of both the gpu and cpu is what attracted me towards this kernel so great job with that dev
But the problem is whenever i flash this kernel, with or without magisk, my phone gets stuck in an infinite boot loop. Tried force rebooting my phone a couple of times but that didnt work either. Im currently using cronos kernel v5 on my j600f running ARM64 HavocOS v2.9
Is there something im messing up in flashing your kernel?
KRAKEN-Kernel-RC10 boot ok in J710MN.
Sometimes system gets a little slow. Altogether, it is a great kernel and more stable than the RC-06 version.
after set 1924 mhz there is reboot
j600f
downvolt to 1300 and 1275 mv is fix it
Kraken RC 15 stable
Release KRAKEN-KERNEL · OGKUARA/android_kernel_samsung_exynos7870
RC15: Changelog: hotplug: disabled on boot kernel: possible reboot fix drivers: battery: limited charging to 1.55A J730X: support for 2A charge A320X: support for 2A charge J600X: support for 2A c...
github.com
Hello, I would like to ask a question Are there bugs in this rom and if there are, can you tell me what bugs are there? I hope your answers have a good day, afternoon or night.
Hey
works on
[ROM][UNOFFICIAL][j6lte][10] LineageOS 17.1
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
??
DISCLAIMER
Code:
[B][SIZE="3"]Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Please read completely this thread before using for minimize FAQ.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
[/SIZE][/B]
This is my personal kernel, based LA.UM.8.9.r1-07700-SM6xx CAF tags with android-linux-stable merged in (currently on v4.14.170).
Feels free to use, testing and bugs report to me (Telegram group exist for bugs report).
Requirements:
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlock Bootloader as well.
Latest TWRP (recommend OrangeFox).
No need Wipe dalvik/art cache.
Main Features:
Kernel based on LA.UM.8.9.r1-08100-SM6xx CAF tags.
Linux v4.14.171.
Kernel compiled with Clang 11.0.0.
Compiled with Link Time Optimization (LTO) enabled.
Compiled with Control Flow Integrity (CFI) enabled.
Compiled with Shadow Call Stack (SCS) enabled.
F2FS supported.
Kernel scheduler is based on PELT implementation by Google on their Pixel 4's series kernels.
Security SElinux performance improvements.
Backported vmalloc performance improvement from mainline.
Android Low Memory Killer TNG from Sony Open Devices Kernel (test).
Network Signal Guru app compatible (maybe?).
Compiled with -O3 optimizations.
And many more, you can check at my Git.
Many thanks to:
Nathan Chancellor for maintaining android-linux-stable.
Park Ju Hyung
Francisco Franco
Sultan Alsawaf
Danny Lin
All of developers contributions which i picked from.
Downloads
Google Drive (2020-02-26)
XDA:DevDB Information
Pendulum Kernel, Kernel for the Xiaomi Redmi Note 7 Pro
Contributors
Yousef Algadri
Source Code: https://github.com/Haseo97/msm-4.14
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 666
Beta Release Date: 2020-02-26
Created 2020-02-12
Last Updated 2020-02-26
Reserved
Reserved
Kernel testing and bugs report group: https://t.me/joinchat/JKuKP0W5A__lg2rVeQxNfw
MIUI not tested.
NOTE: You don't need to reflash Magisk right after flashing kernel, AnyKernel3 has preserved it on their latest AK3.
Yousef Algadri said:
NOTE: You don't need to reflash Magisk right after flashing kernel, AnyKernel3 has preserved it on their latest AK3.
Click to expand...
Click to collapse
does safety net pass with this kernel pro
just internal error after boot on crdroid 6.2
plesit said:
just internal error after boot on crdroid 6.2
Click to expand...
Click to collapse
Yeah my bad, it'll be fixed soon
New update is out.
Changes:
Merged linux v4.14.171.
Merged CAF 'LA.UM.8.9.r1-08100-SM6xx.0' tags.
Kernel now compiled with LTO and LLD as an linker.
Enabled RELR relocation (LLD support it).
Enable Shadow Call Stack (SCS).
Enable BPF Jit.
Improved PELT performances.
Added slab sanitization kernel hardening and enabled it.
Inline with aosp-common android-4.14.
Fixed internal error message every boot.
Fixed sensor issues.
miui.eu 11 (beta rom) supported or not??
rkm8955389 said:
miui.eu 11 (beta rom) supported or not??
Click to expand...
Click to collapse
Read 5th post
Well me jabra fan sir ??
Here are the test results:
Kernel tested: Pendulum-BETA-violet-20200215-#610
ROM: Custom AOSP based on PE
Android version: Q/10
Magisk present, Root access present
Recovery: Peter's TWRP
Post flashing: No issues/errors seen, all working fine thus far.
Its time for big updates!
Changes for #666 build:
- Kernel is LTO, CFI and SCS enabled.
- RCU's update from msm-4.19.
- Compiled only Adreno 6xx driver.
- VLA avoidance.
- Disabled audit.
- Disabled unused erratums debugging.
- Use virtually mapped shadow call stacks.
- A few memory leaks fixes.
- Patch SafetyNet flags.
- Cleaned up FTS and NVT and disable ESD for NVT panel.
- Experimental New Pass Manager on LLD.
- Enabled RCU boost.
- Fixed wcd937x dmesg warnings.
- Force rcu_normal rather than rcu_expedited (ignored dts setting).
- Imported exFAT from k5.4 and enable it.
- Convert few drivers to new i_version API.
- F2fs upstream from f2fs-stable.
NOTE: Encrypted F2FS don't flash this, having a issues.
* FKM flasher integration now supported, get Franco Kernel Manager on Play Store any get Pendulum updates automatically! Paste this LINK! to import kernel configuration.
FKM screenshots.
How's the battery charging on this one? Qc 3.0-4?
Confirmed not working in miui 10
Confirm not working on havoc os 9
WETA Kernel SM-G996U/U1/0 Snapdragon only
*** This will only work on Snapdragon devices with an unlocked bootloader..
SM-G996U/U1 - SM-G9960
Telegram thread
See post #2 for install steps
Changelog...
R5.03
Upstreamed to 5.4.128
Enabled all tcp cong
Westwood tcp default
Disabled unneeded platforms
merged in AUE3 source
R5.02
Telegram thread merged into N20.S20 group, check new links.
Upstreamed to 5.4.127
all modules now inlined, no need for magisk helper module.
added wireguard
Power usage tweaks
More
R4.04
Upstreamed to 5.4.123
R4.03
Upstreamed to 5.4.122
R4.02
Upstreamed to 5.4.121
R4.01
Upstreamed to 5.4.120
R4
Testing phase complete
Upstreamed to 5.4.119
R3
Rebased off UAG source code
R2
Upstreamed to 5.4.118
Fixed Torch/Flash
R1
built using CU8 kernel source
Upstreamed to 5.4.117
Fully permissive
KNOX disabled
Wireguard
Misc debugging disabled
Kernel Downloads
Telegram thread
--------------------->
Beer fund
XDA:DevDB Information
Kernel for the Samsung Galaxy S21 Ultra
Contributors
Mentalmuso, mentalmuso
Source Code: - Kernel Source
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Created 2021-05-10
Last Updated 2020-05-10
*** Be aware, there may be a need to wipe data if you desire to go back to stock kernel, my suggestion is to backup your stock BOOT partition and DATA before flashing. This way you can return to your original setup easily. It is unknown at this stage what data is causing an issue going back to stock. If you find it, be sure to share.
* You must have bootloader unlocked and rooted your device with Magisk before flashing this kernel. Magisk is essential for camera and wacom.
* Boot times are approx 60-75sec at the moment, itll sit on the yellow triangle splash for approx 60sec and the bootanimation for 5sec.
* When flashing this kernel, an AnyKernel helper module is installed. This is a Magisk Module that is essential for the operation of Camera and Wacom. Removal of this module while running this kernel will break camera and spen.
* Kernel zip labels have either a P or E in them, P=Fully Permissive, E=Enforcing (switchable)
To install
download and flash the kernel installer zip in TWRP or any custom recovery
--->
mine2
Mentalmuso said:
mine2
Click to expand...
Click to collapse
Will there be any plan to support exynos?
Mrxyzl said:
Will there be any plan to support exynos?
Click to expand...
Click to collapse
Not without owning an exynos device, no.
Mentalmuso said:
Not without owning an exynos device, no.
Click to expand...
Click to collapse
Sad
Will Banking apps still work after unlocking + magisk + this kernel ? Anyone uses Transferwise or Revolut here ? What about crypto exchanges