Related
Trying to understand the limitation of the turbo charger. I understand it can only do a small subset of the battery in "turbo" mode so it doesn't overpower the battery - fine, makes sense. But does this mean it has to be from 1-30% for example or do I get turbo benefit if I had to plug in to top off from 50-80% for example?
I'm 99% sure it only works in the 0-80% range or so. With most chargers, charging slows for the last 5 to 10% to prevent long-term damage. Slow-charging a Li battery will result in better longevity. There is a good chance it will work in the 50 to 80 range, but certainly not the 80 to 100 range.
Does anyone have the turbo charger and stock charger and can offer some stats on charge times, etc.?
km8j said:
Does anyone have the turbo charger and stock charger and can offer some stats on charge times, etc.?
Click to expand...
Click to collapse
Turbo charger is on preorder right now. Mine says it ships Oct 14. I would imagine its just a boost anywhere around 2.5 - 5.0 volts. The plug that came with my Moto X is a dual plug that is 5.0v so 2.5v per plug I suppose.
Is it only supposed to be used on certain occasions? Meaning we should not use it as our daily charger?
Weddings and Bar Mitzvahs....:fingers-crossed:
hiroller173 said:
Weddings and Bar Mitzvahs....:fingers-crossed:
Click to expand...
Click to collapse
This actually made me laugh out loud. Thank you sir.
I have and use religiously the charger that came with my Blackberry Playbook Tablet awhile back and i bet that it is the same output as the turbo charger. My original X (new custom comes tomorrow) will charge about 40% in 12-15 min. It fly's and my wife loves it too. All my friend and family love using it when they come over.
So it is not the same as the PB charger. Its a QC2.0 charger with 4.5Amp. Your PB charger is no more than 2.1Amp. Most certainly a nice pump incharging but many do that today. Its smart enough not to cook the phone so it should be just fine for daily use. My order still says it will ship on 9/23. Big fail there Moto!
From what I've read, the turbo charger uses Qualcomm's Quick Charge 2.0 which allows the charger to talk to your phone and utilize the full power of the charger, up to 60W if available. It only works with Snapdragon 800 processors. A regular tablet charger will supply 10-15W of power. I couldn't find anything on what levels the battery has to be at for the quick charge to happen, but I think I remember hearing it charges at full capacity up to 67%. I may be wrong on that though.
My question is if Motorola is going to release a car turbo charger. I would rather be able to charge up my phone as I'm driving to go out. Qualcomm lists a few different chargers that use the quick charge 2.0, but none of them are available yet.
xious1 said:
From what I've read, the turbo charger uses Qualcomm's Quick Charge 2.0 which allows the charger to talk to your phone and utilize the full power of the charger, up to 60W if available. It only works with Snapdragon 800 processors. A regular tablet charger will supply 10-15W of power. I couldn't find anything on what levels the battery has to be at for the quick charge to happen, but I think I remember hearing it charges at full capacity up to 67%. I may be wrong on that though.
My question is if Motorola is going to release a car turbo charger. I would rather be able to charge up my phone as I'm driving to go out. Qualcomm lists a few different chargers that use the quick charge 2.0, but none of them are available yet.
Click to expand...
Click to collapse
There's a 3rd party car charger on Amazon now that claims to do Quick Charge 2.0, but the price is pretty steep. No reviews yet.
http://www.amazon.com/Incipio-Qualcomm-Quick-Charge-Chargers/dp/B00NDEMAJO/ref=sr_1_1?ie=UTF8&qid=1412285583&sr=8-1&keywords=qualcomm+quick+charge+2+0
jasoraso said:
There's a 3rd party car charger on Amazon now that claims to do Quick Charge 2.0, but the price is pretty steep. No reviews yet.
http://www.amazon.com/Incipio-Qualcomm-Quick-Charge-Chargers/dp/B00NDEMAJO/ref=sr_1_1?ie=UTF8&qid=1412285583&sr=8-1&keywords=qualcomm+quick+charge+2+0
Click to expand...
Click to collapse
Yea car only :-/
There's a list of certified chargers on Motorola's site. https://www.qualcomm.com/news/snapdragon/2014/06/04/quick-charge-20-has-arrived
zoid_99 said:
There's a list of certified chargers on Motorola's site. https://www.qualcomm.com/news/snapdragon/2014/06/04/quick-charge-20-has-arrived
Click to expand...
Click to collapse
That was the list I referred to, however none of them are available yet, but many of us already have our phone. How could the phone be ready but the chargers are not? Baffling.
Anyone got the turbo Charger yet? And is that incipio one even certified by Qualcomm?
Cheers
Badelhas said:
Anyone got the turbo Charger yet? And is that incipio one even certified by Qualcomm?
Cheers
Click to expand...
Click to collapse
Mine still shows as not shipped. As far as the Incipio car charge, Qualcomm lists an Incipio charger, but it is one of the only ones that does not have a link. I'm guessing it's certified though.
X
xious1 said:
From what I've read, the turbo charger uses Qualcomm's Quick Charge 2.0 which allows the charger to talk to your phone and utilize the full power of the charger, up to 60W if available. It only works with Snapdragon 800 processors. A regular tablet charger will supply 10-15W of power. I couldn't find anything on what levels the battery has to be at for the quick charge to happen, but I think I remember hearing it charges at full capacity up to 67%. I may be wrong on that though.
My question is if Motorola is going to release a car turbo charger. I would rather be able to charge up my phone as I'm driving to go out. Qualcomm lists a few different chargers that use the quick charge 2.0, but none of them are available yet.
Click to expand...
Click to collapse
Grab a power inverter from Lowe's or Home Depot or any auto parts store. Then just plug your turbo charger into the inverter!
borxnx said:
Grab a power inverter from Lowe's or Home Depot or any auto parts store. Then just plug your turbo charger into the inverter!
Click to expand...
Click to collapse
I have an inverter, but that is a piecemeal way of doing it. Plus inverters are not small and sleek like many car chargers. Hopefully it will just take a couple weeks for products to start hitting the market.
Are any of the car chargers with turbo charging ability, dual USB ports? I have to use dual port to power My ad2p gateway.
If they are all 1 USB port I won't be able to try it. I'm more interested in turbocharging on the go than at home.
The only one that I've seen is the Incipio car charger. On Amazon, it says it's a dual port, but the pictures only show one port so I'm not sure. I'm guessing the pictures are not correct.
Any good powerbank out there. At least a 10000 mah above.
To be able to use fast charging feature in Note 4.
Actually that sounds like it would be really cool if it exists, I'd also be interested in knowing if there's a powerbank that supports quick charge. I've held off on picking up a powerbank for a while now, but if something like this is even possible it would probably get me interested, it'd be pretty awesome to be able to just plug in to a backup battery and have it charge up the phone with quickcharge speed ;P I wouldn't be surprised to find out it's not possible though... Anyone know?
Think the dual voltage 5 and 9 volt needed for quickcharge wil be a problem to design a powerbank with a feature like that. I don't say it's impossible but probably won't be cheap or small formfacfor
Yea. Is cool if fast charge powerbank then bring out to fast charge note 4. Lol.
There is this compact power bank (and it supports quick charging itself within 3 hours - via 2.1A input - at least on paper)
APE MP5200Q on Alibaba (not aliexpress)
Weight: 132g
Input: 5V/2.2A
Outport: 5V/3.5A,9V/1.5A,12V/1.5A
3 output ports: 2 USB ports and 1 built-in micro USB cable
Over-charge/discharge, over-current,short protection
Quick Charge output port: output 9V/1.5A or 12V/1.5A on Quick Charge state
Battery Cell type: Samsung Li-ion 18650
Quick charge 2.0: Class A
and it looks good too!
the only missing thing to make it a perfect power bank, would be 15W wireless charging capability...
Please everyone do say what Power bank you have
& how much time does it take to fully charge a Drained battery
So we know which charges how many times, Once or twice or more ....
Thank you all
I have aukey quick charge the silver 10400mah model its charge lg g4 same as qc2.0 wall charger I have mah meter
I also have an aukey but the PB-T2 model 12000mAh. Have quick charge USB outlet and also a normal 1A USB outlet. Has a 2A microusb input for charging an a so-so LED light built in. A bit heavy and slightly longer than the Note 4 in size. Cons: I would have preferred a 2.1A instead of the 1A USB outlet for fast charging other non quick charge devices.
yosef019 said:
I have aukey quick charge the silver 10400mah model its charge lg g4 same as qc2.0 wall charger I have mah meter
Click to expand...
Click to collapse
As above Aukey Quick Charge 2.0 external battery packs are pretty good. They do them in different sizes and go above 10000mah
BlitzWolf looks good.
banggood.com are doing pre order, to be sent out 20th November.
From a store rep..
We use the newer chip FP6600 that not only supports QC but also standard fast charging, the Aukey does charge at QC speeds with their THY100 but will not fast charge other devices such as your iPhone at fast speeds. BlitzWolf's newer IC provides compatibility beyond just QC devices. The battery of the BlitzWolf is is LG and also of a higher standard than Aukeys domestic Chinese brand batteries. In terms of safety and compatibility this is one step ahead of Aukeys 6 month old version.
Click to expand...
Click to collapse
Use coupon "12blitzw" for 12% off.. (Don't know when it ends)
I am using Aukey Power Bank with 15000maH.
Supports Quick Charge and PowerBank itself charges as Quick Charging.
jianrong said:
Any good powerbank out there. At least a 10000 mah above.
To be able to use fast charging feature in Note 4.
Click to expand...
Click to collapse
Hmm... we have Note 4's a removable battery is more compact and supports quick charge. Just have to get a battery charger that supports it. There would also be less power loss because it would be more efficient than transferring energy from one battery to another. Just my opinion.
Hey XDA,
I have issues with buying technology because I am always looking for zero compromises. Been holding off on a battery bank for the 6P because i haven't found "the one"....
Wondering if anyone has seen any battery banks that meet all/most of these criterion:
USB C 3A Input/Output
Passthrough charging (charge the phone and battery bank in series)
6000 mAh or higher
I'm more than happy with this product from RAVPower
http://www.amazon.com/gp/product/B019IFIJW8/ref=s9_acsd_al_bw_c_x_2
Azdian said:
I'm more than happy with this product from RAVPower
http://www.amazon.com/gp/product/B019IFIJW8/ref=s9_acsd_al_bw_c_x_2
Click to expand...
Click to collapse
Great find man! I been looking for something like this. Now if I can only find out if the 18650's are replaceable! Does it look like this box has screws to easily disassemble it ?
the battery pack i'm waiting for (hopefully not forever) is something with 3a fast charging that is more pocket friendly than anker/ravpower ~8000 mAH+
I bought this recently and its working great.
http://www.amazon.co.uk/iVoler-1000...&redirect=true&ref_=oh_aui_detailpage_o01_s00
Not only does it support fast charging via USB C, it uses the USB C port to charge itself as well. This means the battery bank charges in about 3 hours which is quite fast for a 10000mah pack. With a full charge, I can charge my 6p twice.
RngrYogi said:
Great find man! I been looking for something like this. Now if I can only find out if the 18650's are replaceable! Does it look like this box has screws to easily disassemble it ?
Click to expand...
Click to collapse
Nope, It doesn't have screws, I'm pretty sure it's hidden under the back cover.
zpiders said:
I bought this recently and its working great.
http://www.amazon.co.uk/iVoler-1000...&redirect=true&ref_=oh_aui_detailpage_o01_s00
Not only does it support fast charging via USB C, it uses the USB C port to charge itself as well. This means the battery bank charges in about 3 hours which is quite fast for a 10000mah pack. With a full charge, I can charge my 6p twice.
Click to expand...
Click to collapse
Actually this one doesn't have true USB C fast charge (it only goes up to 2.4A @ 5V, not the full 3A)
Azdian said:
I'm more than happy with this product from RAVPower
http://www.amazon.com/gp/product/B019IFIJW8/ref=s9_acsd_al_bw_c_x_2
Click to expand...
Click to collapse
Azdian said:
Nope, It doesn't have screws, I'm pretty sure it's hidden under the back cover.
Click to expand...
Click to collapse
I second this pack. It's a bit on the bigger side, but the added capacity is really helpful when you have to go off the grid for an extended period of time (read international flights), and the extra weight isn't that obvious if you just throw the pack in your backpack or purse, for our lady friends out there.
As for the screws, I don't think it has, and the 18650s aren't supposed to be replaceable either. But heck, the cells are of exceptionally high quality and rated up to 500 cycles, so you don't really have to worry about them going bad.
ttminh1997 said:
Actually this one doesn't have true USB C fast charge (it only goes up to 2.4A @ 5V, not the full 3A.
Click to expand...
Click to collapse
Not true, it DOES have true USB C fast charge as it gives you 5V 3A.
Azdian said:
I'm more than happy with this product from RAVPower
http://www.amazon.com/gp/product/B019IFIJW8/ref=s9_acsd_al_bw_c_x_2
Click to expand...
Click to collapse
Wow, nice, I guess i'll buy one too.
That bank from RAVPOWER seems very nice, I ordered one today.
Yep, RavPower seems to be the one...cool!
Gubro said:
Not true, it DOES have true USB C fast charge as it gives you 5V 3A.
Click to expand...
Click to collapse
I stand corrected! Thanks for pointing this out. Last time I checked, it only supported pseudo fast charge (2.4A @ 5V)
I just got the Anker PowerCore+ 20100 USB-C and find it really good as well.
nramalama said:
I just got the Anker PowerCore+ 20100 USB-C and find it really good as well.
Click to expand...
Click to collapse
I just picked up the same, and I'm impressed so far. It came with a carry bag and 3 cables: A to Micro, A to C, & C to C. Capacity is 20,100 mAh.
Amazon link if you're interested. Will post a review after using it a while.
Dear friends,
Could you please share your experience with power banks so far? I'm looking for some to buy soon...
I bought the Xiaomi Power Bank Pro. It does have a USB type C socket.
Unfortunately that socket is to charge the power bank itself, so connecting the 6P via the USB type C actually drains the phones battery and charges the power bank from the phone. :-o
It does come with a USB A to USB C cable, but it does not quick charge the 6P.
Thanks for your answer, I've read that pressing POWER button on the bank while connecting to the phone could launch charging via USB-C socket - did you try it?
tsuttie99 said:
Hey XDA,
I have issues with buying technology because I am always looking for zero compromises. Been holding off on a battery bank for the 6P because i haven't found "the one"....
Wondering if anyone has seen any battery banks that meet all/most of these criterion:
USB C 3A Input/Output
Passthrough charging (charge the phone and battery bank in series)
6000 mAh or higher
Click to expand...
Click to collapse
O recently ordered the RAVpower 20,100mAh 3.0 one as there was a $10 off coupon code, but can understand the desire for something smaller and more pocket-able.
This is closest thing I was able to find that is pocket-able and, i think, meets your criteria. But no reviews and I've never heard of the brand:
http://www.amazon.com/Imazing-10000...ick+Charge+3.0+USB-C+Type+C++Portable+Charger
Heck I now want one of these too, if they are actually any good....
ButtonBoy said:
I just picked up the same, and I'm impressed so far. It came with a carry bag and 3 cables: A to Micro, A to C, & C to C. Capacity is 20,100 mAh.
Amazon link if you're interested. Will post a review after using it a while.
Click to expand...
Click to collapse
RojasTKD said:
O recently ordered the RAVpower 20,100mAh 3.0 one as there was a $10 off coupon code, but can understand the desire for something smaller and more pocket-able.
This is closest thing I was able to find that is pocket-able and, i think, meets your criteria. But no reviews and I've never heard of the brand:
http://www.amazon.com/Imazing-10000...ick+Charge+3.0+USB-C+Type+C++Portable+Charger
Heck I now want one of these too, if they are actually any good....
Click to expand...
Click to collapse
So what are the differences between the Anker and the RAVpower?
Do they both support being charged at 5V/3A?
EDIT: That pocket-able one is kind of tempting - shame it isn't a more reputable brand
The RAVpower unite I ordered does both USB-C 5V 3A and Quick Charge 3.0 the Anker unite seemed not to (not even sure it did either, must where QC 2.0).
An answer in Lenovo's support forums says the G5 does not support Turbo Power, but it comes with a 10W rapid charger. The problem that here in Brazil not even this 10w charger gets shlpped with the phone, neither can I find it for sale, so I'm thinking about getting a 15W Turbo Power charger, does anyone knows if it'll charge the G5 (25W and above are reportedly not working with the G5)
It won't work, But you'll get fast charge tho (NOT TurboCharge, which is even faster. Just standart fast charge)
Randonio said:
It won't work, But you'll get fast charge tho (NOT TurboCharge, which is even faster. Just standart fast charge)
Click to expand...
Click to collapse
Will fast charge charpe it faster than a 5V-2A charger?
freeZbies said:
Will fast charge charpe it faster than a 5V-2A charger?
Click to expand...
Click to collapse
Maybe? I'll test it, and say the results
Randonio said:
Maybe? I'll test it, and say the results
Click to expand...
Click to collapse
Ok, if you do it, that'll hilp a lot, since moto G5 came with this standard 2A charges.
I bought my Moto G5 in Brazil near the launch date, it did come with the 10 W charger (5V-2A, W = V x A, do the math). As far as I know, Snapdragon 430 support Quick Charge 3.0. I bought a ROCK charger with Quick Charge 3.0, just waiting for it to arrive from Aliexpress, should work just fine.
Sephirothrx7 said:
I bought my Moto G5 in Brazil near the launch date, it did come with the 10 W charger (5V-2A, W = V x A, do the math). As far as I know, Snapdragon 430 support Quick Charge 3.0. I bought a ROCK charger with Quick Charge 3.0, just waiting for it to arrive from Aliexpress, should work just fine.
Click to expand...
Click to collapse
Well, I didn't know that this would result in 10W. Anyways, as far as I know the moto G5 doesn't support Turbo/Quick charge, despite using the Snapdragon 430. I say thay because none of the TurboPower chargers in Motorola's website cites the G5 as supported (only G5+/G5S), in addition, I read many reports in Lenovo's official forum repporting it doesn't support Quick/Turbo Charge, like here: https://forums.lenovo.com/t5/Moto-G...g-with-Qualcomm-quick-charge-3-0/td-p/3828209
In other words, a 15W charger is not supposed to provide great advantages over the regular charger that came with it.
Anyways, thanks for showing me a 5v-2a equals 10w, I googled and confirmed it.
freeZbies said:
Well, I didn't know that this would result in 10W. Anyways, as far as I know the moto G5 doesn't support Turbo/Quick charge, despite using the Snapdragon 430. I say thay because none of the TurboPower chargers in Motorola's website cites the G5 as supported (only G5+/G5S), in addition, I read many reports in Lenovo's official forum repporting it doesn't support Quick/Turbo Charge, like here: https://forums.lenovo.com/t5/Moto-G...g-with-Qualcomm-quick-charge-3-0/td-p/3828209
In other words, a 15W charger is not supposed to provide great advantages over the regular charger that came with it.
Anyways, thanks for showing me a 5v-2a equals 10w, I googled and confirmed it.
Click to expand...
Click to collapse
You are welcome.
To be honest I have been using the Quick Charger but can confirm if it's working or not. I usually just plug the phone before going to sleep, when I wake up it's already 100% . I will search if there's anything available to detect if it's using the quick charge or not.
Did it work?
I'm using my wife's charger from her G4+ and it seems not boost the charger at all. It takes the same time with my own charger. Normally, batteries got a regulator that protect the battery from being overpowered and, maybe, exploded. So, if it was setted to 2A max it won't work anyway. Also, the official charger detects, through USB interface, if the device support Boosted Charging before sending 3A. If you wanna save your money, my advice is don't buy it.
Moto G5 doesn't support Qualcomm 2.0 or 3.0 which charge at 9V or 12V. My original charger used to charge at 5.2V and up to 1.5A, but it doesn't anymore, now doesn't go over 5.0V. Very difficult to charge when powered on when normal charger only manages about 0.6A . Also have problem with portable battery packs, best option is to connect external battery when full, and it just about stops internal battery falling. Maybe the connector wearing out, have tried different cables....
mstombs said:
Moto G5 doesn't support Qualcomm 2.0 or 3.0 which charge at 9V or 12V. My original charger used to charge at 5.2V and up to 1.5A, but it doesn't anymore, now doesn't go over 5.0V. Very difficult to charge when powered on when normal charger only manages about 0.6A . Also have problem with portable battery packs, best option is to connect external battery when full, and it just about stops internal battery falling. Maybe the connector wearing out, have tried different cables....
Click to expand...
Click to collapse
Sometimes it can be as simple as a tiny piece of pocket lint/crud in the USB charging port. You can buy cans of compressed air to blow them out same as used on Camera lens or check with magnifying glass and then a toothpick with care to clean anything found out.
HTH
Blast from past on old phone! The usb port eventually failed completely, fortunately the little board is easy to replace, but the replacement board only lasted a few months. I still have the phone as a spare and charge the removable battery out of the phone.
mstombs said:
Blast from past on old phone! The usb port eventually failed completely, fortunately the little board is easy to replace, but the replacement board only lasted a few months. I still have the phone as a spare and charge the removable battery out of the phone.
Click to expand...
Click to collapse
Sorry about that
But glad you still have the phone
Basically, when the charger is unplugged, the adapter runs in 5V mode, which is safe and good. But when the tablet is connected, then it is upgraded to 9V mode. any USB devices connected with a splitter on the charger wire will receive 9V also! This near doubling of voltage could cause devices to be fried, so make sure your Huawei power adapter isn't powering any hubs!!
YouTube demo video coming soon, overvolting a fan!
Good catch!
Thanks for sharing.
I thought charges and/or device ports had a regulator to control input voltage?
CorruptedSanity said:
Good catch!
Thanks for sharing.
I thought charges and/or device ports had a regulator to control input voltage?
Click to expand...
Click to collapse
Most electronics with a USB port will only be rated for say 5v, or maybe 6v to allow for naughty USB power supplies. 9v is nearly double 5v, and on sensitive low-tech chargers, like resistive ones that charge 18650 or whatever, you could expose the battery to a much higher voltage than what it should have, which could cause an explosion or whatever. I used a fan since it should be able to handle the extra voltage quite happily.
What do you mean fan?
Used a fan to cool what?
Michaelflat1 said:
Basically, when the charger is unplugged, the adapter runs in 5V mode, which is safe and good. But when the tablet is connected, then it is upgraded to 9V mode. any USB devices connected with a splitter on the charger wire will receive 9V also! This near doubling of voltage could cause devices to be fried, so make sure your Huawei power adapter isn't powering any hubs!!
YouTube demo video coming soon, overvolting a fan!
Click to expand...
Click to collapse
There is not problem at all. Qualcomm charge technology and USB 3.1 do the same. The charger and the device negotiate what voltage they want to send the same power but less current (more efficient). You are not supposed to o what you did, it your fault and not from Huawei.
pmj_pedro said:
There is not problem at all. Qualcomm charge technology and USB 3.1 do the same. The charger and the device negotiate what voltage they want to send the same power but less current (more efficient). You are not supposed to o what you did, it your fault and not from Huawei.
Click to expand...
Click to collapse
what I was getting at is that if you were to use a splitter, like I did, then be careful, as the voltage might raise. This is not a concern most of the time, but it's good to just be careful.
My OnePlus 5T and it's dash charging only works when these 3 conditions are satisfied:
Dash charger
Stock OnePlus lead
Nothing else plugged in
otherwise it will default down to normal. It's a shame that this didn't happen on the Huawei charger, but hopefully this means that it will be easier for implementation for powerbanks, I can't find any dash charge power banks. And also apparently Huawei phones usually play nice with other chargers. (USB-C power delivery I'm not sure on this device).
Michaelflat1 said:
what I was getting at is that if you were to use a splitter, like I did, then be careful, as the voltage might raise. This is not a concern most of the time, but it's good to just be careful.
My OnePlus 5T and it's dash charging only works when these 3 conditions are satisfied:
Dash charger
Stock OnePlus lead
Nothing else plugged in
otherwise it will default down to normal. It's a shame that this didn't happen on the Huawei charger, but hopefully this means that it will be easier for implementation for powerbanks, I can't find any dash charge power banks. And also apparently Huawei phones usually play nice with other chargers. (USB-C power delivery I'm not sure on this device).
Click to expand...
Click to collapse
I am just annoyed that Huawei do not use QC or USB-PD standards and I must use their charge to charge fast. I do not mind the 9v as my QC devices charges fast on the Huawei charger but not the other way round, forcing me to either change all my chargers or carry an extra charger.
Not sure if you are talking about FCP for in or out of powerbank, I have a Tronsmart powerbank that supports both QC3 and FCP out. It also supports QC in, which means it MAY charge faster with the Huawei's stock charger. I had not tested it that way yet but I think it should as the Huawei charger charges my other QC devices at QC speed.
Tronsmart Presto Power bank:
https://www.tronsmart.com/products/tronsmart-presto-10000mah-quick-charge-3-0-power-bank
Note that their own specifications regarding the input is incorrect, this picture shows the actual specifications behind the device, which shows it can take [email protected] in.
https://the-gadgeteer.com/wp-content/uploads/2017/07/tronsmart-presto-3.jpg
Also refer to my thread from a while back discussing FCP and QC.
https://forum.xda-developers.com/mediapad-m5/help/m5-quick-charge-t3822277
alvinlwh said:
I am just annoyed that Huawei do not use QC or USB-PD standards and I must use their charge to charge fast. I do not mind the 9v as my QC devices charges fast on the Huawei charger but not the other way round, forcing me to either change all my chargers or carry an extra charger.
Not sure if you are talking about FCP for in or out of powerbank, I have a Tronsmart powerbank that supports both QC3 and FCP out. It also supports QC in, which means it MAY charge faster with the Huawei's stock charger. I had not tested it that way yet but I think it should as the Huawei charger charges my other QC devices at QC speed.
Tronsmart Presto Power bank:
https://www.tronsmart.com/products/tronsmart-presto-10000mah-quick-charge-3-0-power-bank
Note that their own specifications regarding the input is incorrect, this picture shows the actual specifications behind the device, which shows it can take [email protected] in.
https://the-gadgeteer.com/wp-content/uploads/2017/07/tronsmart-presto-3.jpg
Also refer to my thread from a while back discussing FCP and QC.
https://forum.xda-developers.com/mediapad-m5/help/m5-quick-charge-t3822277
Click to expand...
Click to collapse
I know your trouble, I have a OP5t, and that charges at 7.5W from my Huawei charger, when it can charge at 20W using dash charger, my mediapad charges at 10W from the dash charger, out of 18w capability. I do look silly carrying round two chargers with the same plug on them!!
Yeah no dash charger power bank, at least there is a Huawei FCP one like you said, I might get that as my next one, but I've got a lovely EC technologies powerbank, and that only does 10W no matter what, shame really as it is 82whr (massive!).
Michaelflat1 said:
I know your trouble, I have a OP5t, and that charges at 7.5W from my Huawei charger, when it can charge at 20W using dash charger, my mediapad charges at 10W from the dash charger, out of 18w capability. I do look silly carrying round two chargers with the same plug on them!!
Yeah no dash charger power bank, at least there is a Huawei FCP one like you said, I might get that as my next one, but I've got a lovely EC technologies powerbank, and that only does 10W no matter what, shame really as it is 82whr (massive!).
Click to expand...
Click to collapse
Luckily (for me at least!), I do not normally carry my M5 around and therefore do not need quick charge on it. Even if taken on holiday, it can charge overnight in the hotel. However this put me off Huawei (and OnePlue, Oppo and any other brands that do not use QC standards) for my future purchase.
Wow, I didn't realize how bad this bites. MediaPad was my first QC3 device. Used it's charger in my bedroom. Then got a LG v35 QC3 phone last week to replace old Nexus 6P (USB C-PD). So excited to see the Huawei charger fast-charging both devices. So irritating to now realize that the LG QC3 charger won't fast charge the M5!
And Huawei is using a proprietary QC3 charging mechanism? ie. are there any compatible chargers on Amazon or only the charger from Huawei will fast charge the M5?
StephenMSmith said:
Wow, I didn't realize how bad this bites. MediaPad was my first QC3 device. Used it's charger in my bedroom. Then got a LG v35 QC3 phone last week to replace old Nexus 6P (USB C-PD). So excited to see the Huawei charger fast-charging both devices. So irritating to now realize that the LG QC3 charger won't fast charge the M5!
And Huawei is using a proprietary QC3 charging mechanism? ie. are there any compatible chargers on Amazon or only the charger from Huawei will fast charge the M5?
Click to expand...
Click to collapse
Sorry, Huawei does not use QC standards but their own FCP/SCP instead. QC chargers will not fast charge Huawei gear but Huawei charger MAY charge QC gear fast.
So if I plug my M5 into a standard QC3.0 charger (9v I think), does it at least charge somewhat faster than a standard, non-QC charger? I would assume so. And are they're any 3rd party fasxt chargers compatible w/Huawei's dumbarse proprietary QC3 charging?
StephenMSmith said:
So if I plug my M5 into a standard QC3.0 charger (9v I think), does it at least charge somewhat faster than a standard, non-QC charger? I would assume so. And are they're any 3rd party fasxt chargers compatible w/Huawei's dumbarse proprietary QC3 charging?
Click to expand...
Click to collapse
No it doesn't, as confirmed by a V/A USB meter. It will only top out at 5V/2A.
I repeat again, Huawei does NOT use QC3 technology, but FCP/SCP technology. If you are looking for a charger that can do both QC and FCP from the same socket, read through the tread again as I had already posted a brand and model that had been tested and confirmed to do both.
Ah, sorry, me dumb and had in my head that M5 was QC3. Now I get it -- FCP, not same as QC3. OK, I see your link and several other chargers compatible w/QC3 and FCP. Thanks!
Hi,
I have a ThinkPad E580 which comes along with a charger Type-C, on the charger has been written : OUTPUT: 20V-3.25A / 15V-3A / 9V-2A / 5V-2A
Is it safe to try charge my MediaPad M5 by this charger?
sz.hatef said:
Hi,
I have a ThinkPad E580 which comes along with a charger Type-C, on the charger has been written : OUTPUT: 20V-3.25A / 15V-3A / 9V-2A / 5V-2A
Is it safe to try charge my MediaPad M5 by this charger?
Click to expand...
Click to collapse
I had used USB PD adaptors on the M5 before and it charges fine, but not quickly.
My Pad (M5 10.8 WiFi) charges via USB PD with 18 Watts using the 9 Volt Profile. What doesn't work is Quick Charge. Power delivery works fine
Is there anything special about the actual Huawei furnished cable? I need a longer one than what was furnished.
reubenray said:
Is there anything special about the actual Huawei furnished cable? I need a longer one than what was furnished.
Click to expand...
Click to collapse
Nothing whatsoever
But get a good one that supports high wattage.
Some cables only transmit 5 watts
Meaning 5v and 1 amp
Technology from 2005