ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011)
If you get an error "ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011)" while trying to flash the phone, try the following steps:
1) Make a complete (all checkboxes selected) memory test on the "Memory Test" tab, in my case the test produced the following data:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x20000000 (512MB / 4096Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000 (2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000 (2MB)
EMMC_PART_RPMB Size = 0x0000000000080000 (0MB)
EMMC_PART_GP1 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP2 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP3 Size = 0x0000000000000000 (0MB)
EMMC_PART_GP4 Size = 0x0000000000000000 (0MB)
EMMC_PART_USER Size = 0x00000000ec000000 (3776MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK !!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
OK !!
RAM Pattern Test:
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK !!
Increment / Decrement Test:
Writing ...
OK !!
============================================
The line with the maximum address "EMMC_PART_USER Size = 0x00000000ec000000 (3776MB)" is important here, for correct understanding, the leading zeros are deleted by translating to the normal form "0xEC000000", if there are several blocks with start addresses greater than "0xEC000000" in the file "scatter" "SP Flash Tool" produces the message "ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011)" and does not allow to flash.
2) Open the file "scatter" in a text editor (preferably in Notepad ++) and look for all the blocks "partition_index:" with "linear_start_addr:" more than "0xEC000000" and remove these blocks, except the "partition_name: BMTPOOL" block if it is not deleted it is possible to restore IMEI through the engineering menu. In my case at the end of the "scatter" there were two blocks with addresses greater than "0xEC000000":
- partition_index: SYS21
partition_name: RSV_OTP
file_name: NONE
is_download: false
type: NONE
linear_start_addr: 0xFFFF0200
physical_start_addr: 0xFEFF0200
partition_size: 0x2B00000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: INVISIBLE
reserve: 0x00
- partition_index: SYS22
partition_name: BMTPOOL
file_name: NONE
is_download: false
type: NONE
linear_start_addr: 0xFFFF00A8
physical_start_addr: 0xFFFF00A8
partition_size: 0x1500000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: false
is_reserved: true
operation_type: RESERVED
reserve: 0x00
=============================================
3) I only deleted the "partition_name: RSV_OTP" block (although I do not know what it is for), I saved the file, rebooted it in the "SP Flash Tool" and sewed it
(If necessary with the "Format All + Download" option selected). At me all was made, after the firmware at once it was loaded in "Recovery"
Made all the "Wipe" and rebooted, after the load, it rebuilt IMEI through the engineering menu, checked everything seems to work.
Special thanks to sterbin29 for the tip on the problem.
Related
First: Sorry for the bad english
My phone its a BLu advance 4.0 A270a
im sure its not a driver problem, i flashed the rom once and got no problems
ive used 4 different roms and 2 different versions of SP flahstools
in the 5.1343.01 :
BROM ERROR: S_DL_PMT_ERR_NO_SPACE(5069)
in the 5.1612:
BROM ERROR: ?? (0x8)
I already did a format whole flash, but when downloading it just download the preloader
Ive flashed the rom once and it worked, so i dont think that it can be a problem from the scatter file,
to be sure ive tried 3 different roms a got the same errors
Memory test:
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
It seems like the problem is the nand flash
ive read that its a hardware problem and the solution is change the emmc, is that true??
Hello and welcome on XDA,
please ask in our Q&A section:
Android Q&A, Help & Troubleshooting
Good luck!
Kind regards
Trafalgar Square
XDA Assist
please help bricked phone, sm-a9 clone ive triedmany possibilitiies using flashtool the phone is dead it is flashing correctly, but white screen only,i ve tried many roms scatter files flashing but same, ive done a memory test and here is the result
Internal RAM:
External RAM:
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001c8000000(7296MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test:
Writing...
OK!
please help me im struggling with it everyweek dayoff
Hi !
Unfortunately we cannot help you with cloned phones , there is no development for such devices, you can check here though
https://forum.xda-developers.com/android/help
Good luck !
Good afternoom, since my tablet Q79 (aparently an HKC tablet) suddenly got freezed about 2 or 3 weeks ago, int that moment I restarted it trough the power button and after that the tablet doesn't pass the logo. Doing a kind of research a good friend called @KevMetal gave mi tips on what to do with my tablet, doing this:
1) Install the vcom drivers
2) I´ve tried several times to flash the tablet (only the bootimg.img and the recovery.img) with SPflashtool and got this result
a) with version 5.1628 it shows the error BROM ERROR: S_FT_DOWNLOAD_FAIL (0xFA8)
b with version 5.1516 it shows the error BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
3) I've done a memory test andit shows this result:
Code:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x0000000386000000(14432MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test:
Writing...
OK!!
If I go to fastboot mode, I can get all the variables that the tablet gives (I think so), the thing that I didn't tested is to format the emmc with spflashtools because I wanna look first in the tablet box and see if the IMEI is there (the tablet doesn't have over it or if is in a stick over the tablet, that stick is erased). So with further reading I feel I face two scenarios, one is the emmc died and the other is that I need to format everything (fear is present in both scenarios) and I need to know what to do next in case the emmc is dead.
Here two questions:
What advice can any of you give me to resurrect the tablet in case the emmc memory is alive?
In case the emmc memory is death, how can I change the tablet firmware so the tablet look the OS in the micro SD card instead of the emmc memory?, I know its possible because I have a nanopi M1 developer computer wich all OS (android included) load from the micro SD card since it doesn't have internal memory.
Thanks in advance for all the help.
Hello friends,
my DooGee F1 Mini is continuously rebooting. Reflashing didn't help.
I'm trying to test the memory by the SP Flash but tool is hanging at "RAM Pattern test":
Code:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000080000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001d2000000(7456MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
How can I test the RAM of the phone?
Is there any other tool/method? ( I cannot use any APK, because I cannot boot Android).
Hello everyone, please help me. my phone is
Eurostar onyx 1s mt6582 android 6 phone got stuck on boot logo
I tried a lot of framewere not work.
someone suggest to wait for 15 minutes then try to wipe cache and format factory from recovery, it did not work.
I don't have custom recovery,
I can't unlock bootloader to install custom recovery.
I try Root integrity check from stock recovery it gives 12 errors. in recovery down their msg (supported API:3)
When I remove the battery from the phone and return it then I try to power the phone more than once. It works rarely. It reaches the setting stage and then gives an error message app.stop. then restart by self.
I tried a memory test using SP_Flash_Tool_v5.1944, I had error and it down below.
I have a miracle box (craked), how it can help me?
p, li { white-space: pre-wrap; }
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x000000039d000000(14800MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
---------------------------
Smart Phone Flash Tool
---------------------------
ERROR : S_DA_MT_DEDICATED_PATTERN_ERROR (3099)
[H/W] DA detects error on the phone while memory test with dedicated pattern! Please ask for help.
[HINT]:
---------------------------
&OK &Help
---------------------------
please help me