Related
Spike Laboratory - Metallium
ABOUT Spike Laboratory - Metallium
Spike Laboratory - Metallium >>SPLM is an after market firmware based latest "Android Lollipop 5.X.X. This firmware is designed By Spike Laboratory .This firmware suits specially for those people who like,Multitasking performance,optimum speed. In-addition to This the firmware has Inbuilt options and settings to make customization of your Device the way you like.
Features , changelogs and screenshots can be found on Spike Laboratory - WEB
SUPPORT FOR SPLM RELATED ISSUES :
We spend an astonishing amount of time developing this firmware.
We can't spend much time on XDA as a result, so if you need support, please try the following:
Ask a question in your device forum in XDA. Someone will no doubt try to help you.
Our device maintainers are going to help you so pm them.
Any bugs or any other issues report to the device maintainers.
If you want to contribute or join to the device maintainer team contact either team leaders or device maintainers.
We expect that users help each other, well xda is a ll about it.
OFFICIAL LINKS & INFORMATIONS :
Official Web-Page
SPLM ROM
RECOMMENDED GAPPS
(Please do not mirror Download links or Mention Link in any of your posts )
INSTALLATION STEPS:
Minimum Requirements To Install SPLM:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP : Click Here to View TWRP Offical supported devices
Installation Procedure:
(A)If you are making a Fresh Installation(or coming from any other rom other than SPLM) :
Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.
Click to expand...
Click to collapse
(B)If you are already Running SPLM Rom But you want to update with latest version:
Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.
Click to expand...
Click to collapse
SOURCE:
SPLM ROM SOURCE
SPLM DEVICES SOURCE
CREDITS:
Spelegius
mkodekar
Buda1996
Mardon
olarf
Nitzz
Mythi
Yann Molle
tilaksidurim
Men_in_black
ALL SPLM team
CM
AOSPA-L
Click to expand...
Click to collapse
WHO ARE WE AND WHAT ARE WE DOING?:
TEAM SPIKE LABORATORY
Every donation you send to us goes right back into the active development. It's used for server costs, etc - all the things that help us make SPLM better with every release. If you've enjoyed SPLM Rom, please consider contributing or donating so we can achieve our goal.Please Don't hesitate to hit the THANKS button.Thank you, and we hope you continue to enjoy SPLM Roms!
http://forum.xda-developers.com/donatetome.php?u=4758315
XDA:DevDB Information
[ROM][OFFICIAL][5.1.1_r24] "Metallium OS" By Spike Lab - Falcon, ROM for the Moto G
Contributors
Nitzz
Source Code: https://github.com/Metallium-ROM
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Beta Version: 1.0
Beta Release Date: 2015-09-02
Created 2015-09-02
Last Updated 2015-10-22
Bugs/Known Issues:
~Wifi Fixed
~Ambient display Fixed
Reserved 2
just in case
Downloading
Edit : link not yet UP
bloodhound42 said:
Downloading
Edit : link not yet UP
Click to expand...
Click to collapse
edit: check again.
Good work mate, remember the nobugs [emoji6] [emoji6] [emoji6]
Hello I am the team leader, i would like to say this a initial build .
This rom will be completely diffrent and we hope independent as some others are.
If you have any suggestions about further improvments features either pm me or make pull requests.
Enjoy and thanks for positive support.
Angua 666 said:
Good work mate, remember the nobugs [emoji6] [emoji6] [emoji6]
Click to expand...
Click to collapse
reported ones will be fixed asap
Some screenshots ? Beacuse there is a reported Metalium UI ? Is any different than AOSP look ?
Theme Engine? Layers?
Where can I find screenshots?
Thanks for the ROM and I'd like to give some suggestions but first I need to know the ROM better.
EDIT: "RECOMMENDED GAPPS" has same link for "ROM".
Tried the ROM on XT1033 using TK Gapps. It is CM Theme Engine!
The ROM is pretty smooth and the "Swipe to dismiss recent apps" is first time I see it, and is a nice feature..
FM Radio works fine, Camera too.
But:
WiFi is not activating.
"Buttons" is not accessing in Settings.
"Hand wave" in Gestures is not working and I guess "Ambient display" is not working too.
Nice work mate
Sent from my falcon using Tapatalk
Logs or it didnt happen.
Buttons is a known issue and will be fixed in next build.
Wifi and ambient : http://postimg.org/image/65dq65x8j/ @jneto3000
Eurofighter_ty said:
Some screenshots ? Beacuse there is a reported Metalium UI ? Is any different than AOSP look ?
Click to expand...
Click to collapse
yes there is and will be merged in upcoming build, have patience my friend
initial build is having same lollipop ui/look
Wifi is not switching on at all
Edit: Optimus didn't solve it
waiting for the next build eagerly
New fixed build will be up asap.
you are quick am loving it
Love to give a try.... X1033. Hope dual sim works.
Iyengar
Latest Microsoft Apps For All DevicesNOTE--->All credits goes to Microsoft for making these apps I just ported them to android platform I havent tested them on any other android version than android lollipop 5.1.1 so kindly test and tell me if they work on others too thank you i will shortly update the apps and add more ones soon
List of ported Apps:
-Cortana
-Microsoft launcher
-next lockscreen
-Microsoft lockscreen
-Microsoft keyboard
-Hyper lapse camera
Post layout
1- Apps introduction
2- ScreenShots
3- App features
4- Download links
5- Reserved postCredits---->
MicroSoft for creating them and Me for porting them
XDA:DevDB Information
[BETA][APPS PORT][5.1.1]Microsoft Apps Port For All Devices , App for all devices (see above for details)
Contributors
gracefang, gracefang
Version Information
Status: Testing
Created 2016-04-24
Last Updated 2016-04-24
ScreenShots here
https://www.dropbox.com/sh/f4ux2c3x7ioxep1/AAAlFwGkk4UgXz5FVFg4A4O7a?dl=0
Apps Features and details
coming soon
Download link---->
http://www.mediafire.com/download/qodt4b4q1kt3fp8/Microsoft_apps.zip
more apps in few days
For future
The lock screen apps look really good but they use tons of memory, the keyboard is a little laggy, they could work well on a high end device.
Good job.
They all work on my moto g xt1032, cm13
How to install?
Is it flashable zip?
aryalmuskan17 said:
How to install?
Is it flashable zip?
Click to expand...
Click to collapse
install as normal apps
wow, that's cool) Good work! Success in porting!
I don't understand, what did you port? These are all available on the Play Store from Microsoft??
https://play.google.com/store/apps/details?id=com.microsoft.androidapps.picturesque
https://play.google.com/store/apps/details?id=com.microsoft.cortana
https://play.google.com/store/apps/details?id=com.microsoft.launcher
https://play.google.com/store/apps/details?id=com.microsoft.next
https://play.google.com/store/apps/details?id=com.microsoft.hyperlapsemobile
https://play.google.com/store/apps/details?id=com.microsoft.hub_keyboard
timbawolf2k said:
I don't understand, what did you port? These are all available on the Play Store from Microsoft??
https://play.google.com/store/apps/details?id=com.microsoft.androidapps.picturesque
https://play.google.com/store/apps/details?id=com.microsoft.cortana
https://play.google.com/store/apps/details?id=com.microsoft.launcher
https://play.google.com/store/apps/details?id=com.microsoft.next
https://play.google.com/store/apps/details?id=com.microsoft.hyperlapsemobile
https://play.google.com/store/apps/details?id=com.microsoft.hub_keyboard
Click to expand...
Click to collapse
latest versions not available to all devices
CyanogenMod™ is a free, community built, after-market firmware distribution of Android™ 4.4.4 (KitKat™), which is designed to increase Performance, Stability, and reliability over stock Android for your device.
CyanogenMod™ is based on the Android™ Open Source Project with extra contributions from many people within the Android™ community. It can be used without any need to have any Google™ application installed. Linked below is a package that has come from another Android™ project that restore the Google™ parts. CyanogenMod™ does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This version of CyanogenMod also came with Lollipop ™ Thame, it looks like well. It's fast!
Support Phones
------------------------------
Lenovo™ A6000 [I have Not Tested] [Tested by xda_borj]
Lenovo™ K30-T [Tested]
Download
------------------------------
ROM :
http://d.7to.cn/download.aspx?actio...C3jC932bOB15crvHCglWDcXO3gwoiphK8NAp0sS2MJA==
GApps:
http://opengapps.org
Select:
-arm/arm64
-4.4
-Pico
Bugs
------------------------------
- Can't get Internet [Thanks for xda_borj]
About the ROM
People Created: X神之怒
People ‘Last’ Created: Ricky844
First Release Date: 2015-06-11
Support Phones: Lenovo K30-T, A6000
Found the ROM on: 奇兔ROM市
Frequently asked questions
Q : I get error 255 while flashing from recovery
A : Flash using correct TWRP Download it Here!
(Only for K30-T)
Q : Is it support Xposed?
A:Installed.
Q : Can I install SuperSU or Magisk?
A:Installed too. (SuperSU Installed.)
Q : Who made this ROM?
A : Someone in China, I am going to make new version for this ROM.
Q : Why I can't get signal when I using this ROM?
A: If you are using China Internet, it will have signal.
KoChangelog:
-Update 1 2015-06-11 :
Got ROOT super license
New Xposed framework, more powerful
Add Xblast tools, a number of advanced settings
Add gravity toolbox, hundreds of custom functions
Add green guardian, guard your program, perfect power control
Support lock screen shortcuts custom widget changes
Support to modify the theme style, fonts, sound effects package
Support the status bar to modify the clock style, battery style
Support drop-down notification bar Custom modify quick settings, floating notification
Support DSP music effects
Support font size and interactive screen warranty changes
Support stand-alone double-click long HOME key and menu key custom changes
Support processor, IO scheduling modification
Support memory management, adjust the background occupied
Needless to say the overall fluid, suitable for smooth use of oil
-Update 1.1 2017-01-21 :
Get latest version of Xposed and SuperSU
Add 1 Ringtone
Download : File missing
Holo CM 11 download:
http://d.7to.cn/download.aspx?actio...7mHa7UtzA89edqoV+IeSS7khJUUTnxbkaNySCG6S6Yg==
You need to post screenshots. Also, may I ask who made this ROM?
xda_borj said:
You need to post screenshots. Also, may I ask who made this ROM?
Click to expand...
Click to collapse
Oh!Yeah, I forgot to said it's someone made.Soneone in China.
Ricky Chrung said:
Oh!Yeah, I forgot to said it's someone made.Soneone in China.
Click to expand...
Click to collapse
I am going to make new version to this rom, ask me if anything
Ricky Chrung said:
Oh!Yeah, I forgot to said it's someone made.Soneone in China.
Click to expand...
Click to collapse
Ricky Chrung said:
I am going to make new version to this rom, ask me if anything
Click to expand...
Click to collapse
It would be great if you put the version of Android this ROM was based and the date it was created or updated. Anyway, how about screenshots? Thank you in advance.
xda_borj said:
It would be great if you put the version of Android this ROM was based and the date it was created or updated. Anyway, how about screenshots? Thank you in advance.
Click to expand...
Click to collapse
OK! Thanks for asking about Screenshots,I will upload that when I open my computer.
Ricky Chrung said:
OK! Thanks for asking about Screenshots,I will upload that when I open my computer.
Click to expand...
Click to collapse
Great! How about editig your post and put Android version and the date the ROM created?
xda_borj said:
Great! How about editig your post and put Android version and the date the ROM created?
Click to expand...
Click to collapse
Thanks for asking, I will do that later
Ricky Chrung said:
CyanogenMod is a free, community built, after-market firmware distribution of Android 4.4.4 (KitKat), which is designed to increase Performance, Stability, and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Support Phones
------------------------------
Lenovo A6000 [Not Tested]
Lenovo K30-T [Tested]
Download
------------------------------
ROM :
http://d.7to.cn/download.aspx?actio...C3jC932bOB15crvHCglWDcXO3gwoiphK8NAp0sS2MJA==
GApps:
http://opengapps.org
Select:
-arm/arm64
-4.4
-Pico
Click to expand...
Click to collapse
People Created: X神之怒
First Release Date: 2015-06-11
Support Phones: Lenovo K30-T, A6000
Ricky Chrung said:
Thanks for asking, I will do that later
Click to expand...
Click to collapse
Thanks! By the way, I tested your ROM on my Lenovo A6000. All I can say that the ROM is good. However, there's no signal. There's a problem with SIM network. I can't get any signal. I hope this helps.
xda_borj said:
Thanks! By the way, I tested your ROM on my Lenovo A6000. All I can say that the ROM is good. However, there's no signal. There's a problem with SIM network. I can't get any signal. I hope this helps.
Click to expand...
Click to collapse
Q : Why I can't get signal when I using this ROM?
A: If you are using China Internet, it will have signal.
Ricky Chrung said:
Q : Why I can't get signal when I using this ROM?
A: If you are using China Internet, it will have signal.
Click to expand...
Click to collapse
Or maybe I try to fix it.
Ricky Chrung said:
Or maybe I try to fix it.
Click to expand...
Click to collapse
Not only internet. What I meant to say is it has no network coverage. No signal at all. Can't do SMS and calls. Anyway, if that's what you meant to say on your QA, I apologize for not getting it.
xda_borj said:
Not only internet. What I meant to say is it has no network coverage. No signal at all. Can't do SMS and calls. Anyway, if that's what you meant to say on your QA, I apologize for not getting it.
Click to expand...
Click to collapse
Ok
A7 2018 PORT ROM
You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!First you have to treble your device from here
If you appreciate the work i have done, Feel free to buy me a cup of coffee @Paypal
Some information you should know..
This is a full A7 2018 port with Treble android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES
- Android 8.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung experience 9.0 without missing vital apps
- And all the goodies Oreo brings
- Based on A750FNPUU1ARK4
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
Project Treble Rom Features :-
- Full Treble support
- Navigation bar gestures
- AR stickers
- AlwaysOn Display(Aod Touch, Variable brightness)
- BluelightFilter
- BixbyVision
- Samsung DolbyAtmos
- Optimised for A8/A8+
- Many prop and feature tweaks
- DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
- ODM Supported for middleEast , Europe And asian countries
- VoLTE Supported
- Uptodate APN Configration
- Exclusive samsung apps
- And many more additions
Quantum Custom Kernel v1 :-
- Basic Kernel to boot any Rom
- based on A750FNPUU1ARK4 ramdisk
- Full treble ramdisk
- Supports 8.0 and 8.1
- Samsung Security Disabled
- Disabled more knox and logging
- Init.D Support
- Other minor improvments
INSTALL STEPS
ensure you have LATEST TREBLE TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
VERY IMPORTANT
DONT FLASH MAGISK BEFORE FIRST BOOT !
Setup your rom and READ the F.A.Q for more information.
BUGS
Samsung camera video recorder (third party recorder apps work)
CREDITS
- @Griffin98 , @lzzy12 , @somadsul , @TaifAljaloo , @ananjaser1211 for all their support and contribution
Downloads. Changelogs , F.A.Qs below
XDA:DevDB Information
A7 2018 Treble, ROM for the Samsung Galaxy A8 (2018)
Kernel Source Code: https://github.com/prashantpaddune/universal7885
Contributors
prashantp01
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2019-01-30
Created 2019-01-30
Last Updated 2019-01-30
DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Treble Rom V1 based on A7 2018 port[LATEST]
Initial Release
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V1.0
-initial release
FAQ
Good idea to read this F.A.Q While the rom is installing
Q : This rom supports full treble?
A : Yes, this rom support full treble from A7 2018
Q : If I want to flash GSI, what i have to do?
A : If u planned to flash GSI, just flash this base, and then flash your GSI image from twrp
Q : Phone took alot of time to boot, and is very laggy
A : pay attention to install steps and Don't flash Magisk before first boot
Q : I dont see any EDGE panels after installing
A : Simple, I didn't added
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everthing
Good job sir
Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!
mindlery said:
Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!
Click to expand...
Click to collapse
now that you installed treble fully, you can install GSIs from the treble forums but there is one problem with pie GSIs, some GSIs dont work because of some kind of overlays.. here's a list of GSIs that work and dont work
Avoid these GSIs:
ViperOS (Pie)
Pixel Dust (Pie)
PixelExperience (Pie)
Resurrection Remix (Pie)
HavocOS (Pie)
Liquid Remix (Pie)
MIUI (Oreo)
Oxygen OS (Oreo)
XenonHD (Oreo)
GSIs that work:
Phh-Treble (Pie/Oreo)
AOSP Extended (Pie (6.0)/Oreo)
AOSiP (Pie)
Descendant (Pie)
Bootleggers (Oreo)
Resurrection Remix (Oreo)
Lineage OS (Pie)
Ok nice. Kinda all over the place here. This is crazy. Only because i'm going to try all the ones suggested
Oh. My. God. This is AMAZING! My A8 is gone!
mindlery said:
Oh. My. God. This is AMAZING! My A8 is gone!
Click to expand...
Click to collapse
what do you mean by "gone" ?
587.saboor said:
what do you mean by "gone"
Click to expand...
Click to collapse
Ha. So I've probably tried close to 10 gsi's now and while some were decent, there so far has always been something that makes it unreasonable to stick with.
There's a lot more choices, that's for sure. I was really hoping to nail the rr 9.0 but don't have the patience to fix the partition issue.... so now I am looking at a cool glowing arrow with hopes of no vendor error message at the welcome screen. The install was easy. No idea if this glowing arrow is going to get tired and let me have a spin at it....
Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.
is it normal that my Device now shown as A730F ?
also i noticed a performance decrease
You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!
Click to expand...
Click to collapse
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss
Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
prashantp01 said:
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss
Click to expand...
Click to collapse
So if TW is closed sources i have rights to protect my works from kanging, and quote clearly says `You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!` which means u can use but first you have to take my permissions as it's not OSS. Hope you understand and do more research regarding this `
Joseluize said:
Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.
Click to expand...
Click to collapse
yes, u can root/unroot rom it's upto users
Ztiffn said:
is it normal that my Device now shown as A730F ?
also i noticed a performance decrease
Click to expand...
Click to collapse
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock
prashantp01 said:
yes, u can root/unroot rom it's upto users
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock
Click to expand...
Click to collapse
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open
Ztiffn said:
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open
Click to expand...
Click to collapse
Well if u said aosp phh.... Then its not my rom... Report to phh...what i have made is just vendor for this device
treble roms
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.
stringman666 said:
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.
Click to expand...
Click to collapse
These roms are laggy only at the start give it 10 hours they calm down.
I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
if phone back screens when first (and sometimes in normal) boot this is normal i will try to fix it
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
i want to delete that reply
-
notnoelchannel said:
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
Click to expand...
Click to collapse
I can be a tester But idk if i do the rom on android 5 do I have to do a new thread
Mihot7Forever said:
I can be a tester
Click to expand...
Click to collapse
Thanks!
Mihot7Forever said:
But idk if i do the rom on android 5 do I have to do a new thread
Click to expand...
Click to collapse
No, just edit the thread's name to [ROM] [STABLE] [5.1.1] MRom 1.2 for J100H and release the android 5 build. That's it
notnoelchannel said:
Nah, you'll not have to do a new thread. Just rename the whole thing.
Are you new to this btw? Do you know how to edit threads?
Click to expand...
Click to collapse
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Mihot7Forever said:
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Click to expand...
Click to collapse
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Thanks I'm getting back to work I will add those apps you mentioned chceck up in an hour it will be probabli soon
notnoelchannel said:
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Click to expand...
Click to collapse
Can you help me? how do i set default wallpaper?
Mihot7Forever said:
Can you help me? how do i set default wallpaper?
Click to expand...
Click to collapse
You can't set default wallpaper unless you modify apk's which can lead to many errors
notnoelchannel said:
You can't set default wallpaper unless you modify apk's which can lead to many errors
Click to expand...
Click to collapse
Ok in the version 1.2 i modified apk cmwallpapers but the user MUST set this wallpaper manually
Now im testing the rom on my j100h
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Mihot7Forever said:
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Click to expand...
Click to collapse
By the way can you contact me on Discord?
notnoelchannel#8830
notnoelchannel said:
By the way can you contact me on Discord?
notnoelchannel#8830
Click to expand...
Click to collapse
the username is invalid mine: Mihot7#0068
Mihot7Forever said:
I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
Click to expand...
Click to collapse
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Antiquillium said:
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Click to expand...
Click to collapse
after i get back from school i will try
Mihot7Forever said:
after i get back from school i will try
Click to expand...
Click to collapse
I wish you luck!