Hi all, I have through fastboot flashed a TWRP recovery to my Xperia Z5. But, It doesn't work. When I try to boot into recovery I just get a black screen with a blue LED at the top. I have tried also using adb to reboot into recovery but still no luck. It just boots into the OS. Any idea? Cheers
BlurredXDA said:
Hi all, I have through fastboot flashed a TWRP recovery to my Xperia Z5. But, It doesn't work. When I try to boot into recovery I just get a black screen with a blue LED at the top. I have tried also using adb to reboot into recovery but still no luck. It just boots into the OS. Any idea? Cheers
Click to expand...
Click to collapse
Bootloader Unlocked?
TWRP flashed to recovery partition?
Did you try patched kernel?
Built in patched kernel has TWRP, no need to flash TWRP separately.
https://forum.xda-developers.com/xperia-z5/general/ftf-e6603-33-53-83-google-drive-patched-t3581463
sceryavuz said:
Bootloader Unlocked?
TWRP flashed to recovery partition?
Did you try patched kernel?
Built in patched kernel has TWRP, no need to flash TWRP separately.
https://forum.xda-developers.com/xperia-z5/general/ftf-e6603-33-53-83-google-drive-patched-t3581463
Click to expand...
Click to collapse
So am I just meant to flash boot_E66xx_no_TWRP.img using fastboot flash boot and then the recovery should work?
BlurredXDA said:
So am I just meant to flash boot_E66xx_no_TWRP.img using fastboot flash boot and then the recovery should work?
Click to expand...
Click to collapse
no twrp for TWRP 3.1.0 (need flash recovery)
with twrp for TWRP 3.0.2 (built in, no need flash recovery)
Hello
I just installed Lineage, and it worked, installed it via fastboot boot recovery...
After installation, I wanted to install the recovery too, so i run the command fastboot flash recovery
Then I try it, and it's working. TWRP 3.0.2.0.
But, after reboot, it's booting directly to TWRP. Again and again. can't boot normally to system...
Anyone have a solution ?
Thank you
b-tzu said:
Hello
I just installed Lineage, and it worked, installed it via fastboot boot recovery...
After installation, I wanted to install the recovery too, so i run the command fastboot flash recovery
Then I try it, and it's working. TWRP 3.0.2.0.
But, after reboot, it's booting directly to TWRP. Again and again. can't boot normally to system...
Anyone have a solution ?
Thank you
Click to expand...
Click to collapse
It has to be done in this order:
fastboot flash twrp.img
boot TWRP
install LOS zip
Detailed instructions https://wiki.lineageos.org/devices/libra/install
Hello
Thank you for the answer
I tried tout reinstall all after my bug, just that way and still boot on recovery...
So now how to do this proper way ?
Try using newer version of TWRP.
I was running stock OOS with Android 8.1 with the normal TWRP and Magisk working. When the OOS 9 got out, I installed the full OTA through TWRP (dirty flash) and everything went perfectly, with no problems whatsoever, but I lost TWRP and Magisk, of course.
Now in Android 9 I can't seem to reinstall TWRP (I'm trying with the latest bluespark): I can boot TWRP from fastboot and install Magisk, everything is fine, Magisk works great. However, when I try to install the TWRP zip (through the fastboot loaded TWRP), the phone freezes at the bootloader warning and doesn't boot (and I have to reinstall the full OTA zip to get the phone working again). Or, some other times, it reboots always to the recovery and never to the OS. Any ideas on how to solve this? Thanks in advance.
What version of bluespark are you using ?? v2
Glsoto said:
What version of bluespark are you using ?? v2
Click to expand...
Click to collapse
9.85v2
first fastboot boot twrp.img, the install twrp.zip , reboot recovery and then magisk..
I also tried to fastboot boot blu_spark twrp V2 IMG.... This ended in a black screen. I used the latest official twrp without a problem on pie.
Glsoto said:
first fastboot boot twrp.img, the install twrp.zip , reboot recovery and then magisk..
Click to expand...
Click to collapse
Thanks! Did it in that exact order and now everything works. I was forgetting to reboot the recovery before installing Magisk.
don't flash magisk on the temporary TWRP
Hexyl said:
I also tried to fastboot boot blu_spark twrp V2 IMG.... This ended in a black screen. I used the latest official twrp without a problem on pie.
Click to expand...
Click to collapse
Cuz of kernel panic. When you boot into twrp after fastboot command - unplag your cable from pc when the command is done, then disable mtp, connect to pc and re-enable mtp.
Dont forget to click thanks
And yeah, use blu spark's TWRP, not official one
Came here from google.
Glsoto said:
first fastboot boot twrp.img, the install twrp.zip , reboot recovery and then magisk..
Click to expand...
Click to collapse
This procedure didn't work for me, for some reason "fastboot boot twrp.img" was leading to black screen.
What worked for me was
1) Boot to fastboot
2) fastboot flash twrpXXX.img
3) Without rebooting, select recovery from fastboot's bootloader menu
4) If you are able to boot in twrp this time, then flash blu spark twrp.
5) Reboot
6) Try to reboot in recovery as usual
If all worked well, you should see twrp recovery.
Cheers.
Alekcander said:
Came here from google.
This procedure didn't work for me, for some reason "fastboot boot twrp.img" was leading to black screen.
What worked for me was
1) Boot to fastboot
2) fastboot flash twrpXXX.img
3) Without rebooting, select recovery from fastboot's bootloader menu
4) If you are able to boot in twrp this time, then flash blu spark twrp.
5) Reboot
6) Try to reboot in recovery as usual
If all worked well, you should see twrp recovery.
Cheers.
Click to expand...
Click to collapse
Hi
I have same problem ... after installing twrp i have black scream. twrp doesnt boot
I trying to use this method but cmd give me ]
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I have restored phone with msn download
OnePlus is again unlocked
I have this problem sins i tried to install magisk and after reboot my op doesn't boot to OS with crash error
any ideas ?
jasiorr said:
Hi
I have same problem ... after installing twrp i have black scream. twrp doesnt boot
I trying to use this method but cmd give me ]
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I have restored phone with msn download
OnePlus is again unlocked
I have this problem sins i tried to install magisk and after reboot my op doesn't boot to OS with crash error
any ideas ?
Click to expand...
Click to collapse
You need to Fastboot boot twrp. Img
jasiorr said:
Hi
I have same problem ... after installing twrp i have black scream. twrp doesnt boot
I trying to use this method but cmd give me ]
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I have restored phone with msn download
OnePlus is again unlocked
I have this problem sins i tried to install magisk and after reboot my op doesn't boot to OS with crash error
any ideas ?
Click to expand...
Click to collapse
yldlj said:
You need to Fastboot boot twrp. Img
Click to expand...
Click to collapse
Alekcander said:
Came here from google.
This procedure didn't work for me, for some reason "fastboot boot twrp.img" was leading to black screen.
What worked for me was
1) Boot to fastboot
2) fastboot flash twrpXXX.img
3) Without rebooting, select recovery from fastboot's bootloader menu
4) If you are able to boot in twrp this time, then flash blu spark twrp.
5) Reboot
6) Try to reboot in recovery as usual
If all worked well, you should see twrp recovery.
Cheers.
Click to expand...
Click to collapse
I have the same problem as Alekcander
When I try to use command ,, fastboot boot twrp-xxx.img nothing happens. I mean mobile restart as always but there is only black screen and notification diode shine white ...
Also Alekcander method doesn't work:
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I tried official twrp and is the same , I tried to disconnect from usb when mobile is restarting also nothing ...
so again ... I have restored phone with msn download -> unlock bootloader...
i have this issue sins i tried to install magisk and after reboot my OP6 doesn't boot to OS and give crash error
any other ideas ?
Solved I have to update system to more recently version. Why twrp doesn't work with oxygen is 5.1.5 ?
I updated to android 10 an hour ago, and placed my phone into the bootloader so I could re-flash TWRP. After I ran the command (fastboot flash boot C:\Users\USER\Downloads\twrp-3.3.1-4-guacamole.img), and tried rebooting, I couldn't leave the bootloader. I've tried using the buttons, trying to push the img to the phone and force it into TWRP, but nothing works. I think I didn't enable USB debugging when I entered the bootloader, but it was enabled before I updated.
It's a known issue, the commands aren't included in the bootloader for q yet. We need to wait for OnePlus to add them. To fix your problem, try fastboot booting the magisk patched boot.img for the 10 beta.
USB Debugging has nothing to do with fastboot.... Just flash stock boot img or a patched with twrp/magisk and boot your phone usually
mercenaryhmster said:
It's a known issue, the commands aren't included in the bootloader for q yet. We need to wait for OnePlus to add them. To fix your problem, try fastboot booting the magisk patched boot.img for the 10 beta.
Click to expand...
Click to collapse
Where do I find the patched boot image?
TheEndernaut said:
Where do I find the patched boot image?
Click to expand...
Click to collapse
If nothing helps, try to reflash with MsmDownloadTool.
TheEndernaut said:
Where do I find the patched boot image?
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Also, once you flashed boot image and booted into Android, Download the twrp INSTALLER and install it via magisk module
From here
https://www.androidfilehost.com/?fid=1899786940962578045
GUGUITOMTG4 said:
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Also, once you flashed boot image and booted into Android, Download the twrp INSTALLER and install it via magisk module
From here
https://www.androidfilehost.com/?fid=1899786940962578045
Click to expand...
Click to collapse
Was able to get past the bootloader, but once I swipe up to load the device, it blacks out
GUGUITOMTG4 said:
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Also, once you flashed boot image and booted into Android, Download the twrp INSTALLER and install it via magisk module
From here
https://www.androidfilehost.com/?fid=1899786940962578045
Click to expand...
Click to collapse
I can't find the menue in magisk manager where I can install TWRP
TheEndernaut said:
I can't find the menue in magisk manager where I can install TWRP
Click to expand...
Click to collapse
Hamburger (upper left), modules, plus icon (bottom center), browse to twrp installer zip.
TheEndernaut said:
I updated to android 10 an hour ago, and placed my phone into the bootloader so I could re-flash TWRP. After I ran the command (fastboot flash boot C:\Users\USER\Downloads\twrp-3.3.1-4-guacamole.img), and tried rebooting, I couldn't leave the bootloader. I've tried using the buttons, trying to push the img to the phone and force it into TWRP, but nothing works. I think I didn't enable USB debugging when I entered the bootloader, but it was enabled before I updated.
Click to expand...
Click to collapse
First you don't flash the TWRP image.
That image is used as a fastboot boot. It is not to be flashed.
Normally, you would boot with that image and flash the TWRP zip to make it permanent.
Once TWRP is flashed, you need to also flash Magisk.
To get out of the situation you are in, you need a stock boot image to flash.
Once that is done, you can start over.
Read the instructions carefully before flashing images.
johnx818 said:
Hamburger (upper left), modules, plus icon (bottom center), browse to twrp installer zip.
Click to expand...
Click to collapse
There is no modules page
johnx818 said:
Hamburger (upper left), modules, plus icon (bottom center), browse to twrp installer zip.
Click to expand...
Click to collapse
There is no modules menu
tech_head said:
First you don't flash the TWRP image.
That image is used as a fastboot boot. It is not to be flashed.
Normally, you would boot with that image and flash the TWRP zip to make it permanent.
Once TWRP is flashed, you need to also flash Magisk.
To get out of the situation you are in, you need a stock boot image to flash.
Once that is done, you can start over.
Read the instructions carefully before flashing images.
Click to expand...
Click to collapse
Just to clarify then, when I run fastboot flash boot TWRP, I use the zip? If not, what command am I using?!
The command is "fastboot boot recoveryfilaneme.img" using the .img file
TheEndernaut said:
Just to clarify then, when I run fastboot flash boot TWRP, I use the zip? If not, what command am I using?!
Click to expand...
Click to collapse
No, no, no.
TWRP can only be flashed from either TWRP or Magisk.
On this device, you can only boot the image file. You can only flash the zip while running a booted TWRP or from the Magisk Manager.
TheEndernaut said:
Just to clarify then, when I run fastboot flash boot TWRP, I use the zip? If not, what command am I using?!
Click to expand...
Click to collapse
Hope I can explain myself. You are using a command you shouldn't be using: fastboot FLASH boot, you shouldn't flash the image from fastboot, you need to use that image to boot into recovery and then flash recovery itself from INSIDE recovery, then you NEED to flash Magisk from inside recovery too.
The command is: fastboot boot recovery.img
Btw, you can't see the "modules" option in Magisk because I think you flashed stock boot.img. Try flashing Magisk patched boot img and then flash recovery in Magisk as it was said before.
Did you click all the 3 buttons at once?
TheEndernaut said:
After I ran the command (fastboot flash boot C:\Users\USER\Downloads\twrp-3.3.1-4-guacamole.img)
Click to expand...
Click to collapse
This is not a command you will find in any guide for this device (at least not any guide that is correct)!
The command you used, flashed the image to over-write the boot partition, which is essentially the kernel. You no longer have a kernel, so of course the phone cannot properly boot to OS. This is also not the correct way to install TWRP, so therefore you have no TWRP installed on the phone, either.
Proper sequence to install TWRP would have been:
1) fastboot boot TWRP.img
This only "boots" into TWRP, but does not install it. I know the syntax here is confusing. "boot" versus "flash boot" do completely different things. In this case "boot" is the action. In the command you used "flash" is the action, and the "boot" partition is the location.
2) Flash TWRP installer zip
3) Flash Magisk
At this point, the easiest path is probably to do what was suggested in Reply #6 above (flash patched boot image, boot to OS, open Magisk and install TWRP from Magisk).
redpoint73 said:
This is not a command you will find in any guide for this device (at least not any guide that is correct)!
The command you used, flashed the image to over-write the boot partition, which is essentially the kernel. You no longer have a kernel, so of course the phone cannot properly boot to OS. This is also not the correct way to install TWRP, so therefore you have no TWRP installed on the phone, either.
Proper sequence to install TWRP would have been:
1) fastboot boot TWRP.img
This only "boots" into TWRP, but does not install it. I know the syntax here is confusing. "boot" versus "flash boot" do completely different things. In this case "boot" is the action. In the command you used "flash" is the action, and the "boot" partition is the location.
2) Flash TWRP installer zip
3) Flash Magisk
At this point, the easiest path is probably to do what was suggested in Reply #6 above (flash patched boot image, boot to OS, open Magisk and install TWRP from Magisk).
Click to expand...
Click to collapse
How do you install TWRP from Magisk?
blade35 said:
How do you install TWRP from Magisk?
Click to expand...
Click to collapse
Magisk/Modules/+/Select TWRP installer.zip
I'm on the latest paranoid Android beta with twrp and magisk installed, can someone provide me with the steps to flash stock ROM 10.3.0 without losing twrp? I don't mind not being rooted
Thanks in advance!
just download the rom from here
flash it via twrp
then after setting up your device reboot to fastboot mode and boot into twrp image
then flash twrp again( be sure to use the latest twrp image otherwise you will not be able to boot into twrp)
ps i dont now if thats gonna work:
flash the rom via twrp
flash twrp.zip
reboot to recovery and again reboot to system
Does TWRP work with 10.30? I couldn't get mine to boot TWRP once I went to 10.30
dimitrispas22 said:
just download the rom from here
flash it via twrp
then after setting up your device reboot to fastboot mode and boot into twrp image
then flash twrp again( be sure to use the latest twrp image otherwise you will not be able to boot into twrp)
ps i dont now if thats gonna work:
flash the rom via twrp
flash twrp.zip
reboot to recovery and again reboot to system
Click to expand...
Click to collapse
I would say, from TWRP :
- unistall magisk
- reboot recovery
- flash the rom zip
- flash twrp zip
- reboot recovery
- flash magisk
Geo411m said:
Does TWRP work with 10.30? I couldn't get mine to boot TWRP once I went to 10.30
Click to expand...
Click to collapse
Sure you can flash it, try 3.3.1-16 !
If you get an error by
Code:
fastboot boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img
try
Code:
fastboot flash boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img
.