Database Info

[Solved!] Difficulty updating to 1.63.531.2 without setting up from scratch

Initial phone stats: DS Mod 1.55.531.3, hboot 1.45.0013, s-on/unlocked via HTC unlocker.
I'm trying to update my own phone to 1.63.531.2 via the PG59IMG.zip file found here, http://forum.xda-developers.com/showpost.php?p=17424340&postcount=24 , but I'm running into problems applying this update and keeping it after restoring a Nandroid backup. It would be a huge amount of work to set up my phone from square one, and I'd like to avoid the process if at all possible.
The steps I've followed (twice, now, with no joy) are the following:
* apply the update through the PG59IMG.zip
* flash CWM 5.0.2.7
* flash Superuser
* restore most recent Nandroid backup
* flash 1.63.531.2 boot image (for wi-fi fix)
And this puts me back at my starting point, with the 1.63.531.2 update not applied.
I know I'm going about this the wrong way, but I can't figure out the correct method to make this work. The fact that I flashed the DS Mod 1.55.531.3 ROM back after unlocking might have something to do with this, however, I just can't nail down why. Really could some help to make this work.
TIA for any suggestions --
--
KingCheetah

hey, real quick, after flashing the 1.63.531.2 update, instead of restoring your full nandoid of 1.55.531.3, go to 'advanced restore', choose that nandroid, and choose only 'restore data'. that will put all your apps and data onto the new update, rather than flashing you all the way back to what you had before.
you could also backup and restore your data with an app called Mybackup Root, or some people use Titanium Backup. I personally like using the advanced data restore in CWM, or else Mybackup.

Yogi, I thought your suggestion would be a smoking gun. However, I'm having the same problem as described in this thread: http://forum.xda-developers.com/showthread.php?p=25431819#post25431819
Might you have any suggestions for addressing the md5 problem? I'm coming up empty...
Thanks for your help --
--
KingChetah

yeah, come to think of it, I've had that problem before as well. did you try what xmc suggested? also, perhaps try the Modaco 4.0.0.9 version of CWM to do the advanced data restore... if my memory serves me, I have had more success overall with that version. unfortunately that's about all I got!
the other sugestion would be to flash your full nandroid, then use Mybackup Root to back everything up. then after updating, DL the app again and restore.
good luck and keep us posted!

yogi2010 said:
yeah, come to think of it, I've had that problem before as well. did you try what xmc suggested?
Click to expand...
Click to collapse
Yes, and for the backup I want to restore, all the md5s are the same between the files and what is listed in the nandroid.md5 file. So, the method XMC suggested really doesn't do anything.
yogi2010 said:
also, perhaps try the Modaco 4.0.0.9 version of CWM to do the advanced data restore... if my memory serves me, I have had more success overall with that version. unfortunately that's about all I got!
Click to expand...
Click to collapse
Hmm, okay, I'll give that a try. Weird that CWM 5.0.2.7 has this problem. Also frustrating.
yogi2010 said:
the other sugestion would be to flash your full nandroid, then use Mybackup Root to back everything up. then after updating, DL the app again and restore.
Click to expand...
Click to collapse
I'll keep this as the last resort, because I'd rather not have to download an app for just this purpose. Nandroid backups have served me fine so far. Call me a minimalist.
I'll try Modaco and see what happens. Thanks much for the idea to try.
--
King Cheetah

Sadness
Using Modaco didn't work. Although the Advanced Restore sees the file and appears to run successfully, it says it can't find a data.img file and an Android.img file, so it doesn't restore the info.
So, I guess it's down to trying Mybackup Root and see what happens. Getting tired of redoing this process over and over.
Why can't things "just work" in these situations?
--
KingCheetah

check the other thread....problems with restoring backup
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
or actually...just flash the data.img through fastboot....its ten times easier
but the data.img in the same directory as adb and fastboot....then run the two commands with your phone in the bootloader
fastboot erase data
fastboot flash data data.img

xmc wildchild22 said:
or actually...just flash the data.img through fastboot....its ten times easier
but the data.img in the same directory as adb and fastboot....then run the two commands with your phone in the bootloader
fastboot erase data
fastboot flash data data.img
Click to expand...
Click to collapse
The problem with this is the file "data.img" doesn't exist in a Nandroid backup. As I stated in my previous message, the Advanced Restore process tossed up a message that the file didn't exist (which is correct).
The files within a given Nandroid backup folder are the following:
.android_secure.vfat.tar
boot.img
cache.ext4.tar
data.ext4.tar
nandroid.md5
recovery.img
system.ext4.tar
From the Advanced Restore problem thread (http://forum.xda-developers.com/showthread.php?t=1624319):
xmc wildchild22 said:
then take the system.img from the 1.63 update and put in replace of the nandroids one....then redo the md5 checksum for the system.img like i had showed before
Click to expand...
Click to collapse
I would love to try this, but since the 1.63 update is a PM59IMG.zip, I can't open it with a zip file manager--it throws up a "central directory not found" error. Unless there's another program besides 7zip that's needed to handle this type of zip file...
Edit: I just realized that, as you can see from the file list above, a Nandroid backup also doesn't have a "system.img" file--it has a "system.ext4.tar," but not "system.img." So being able to pull anything from a PM59IMG.zip file is a moot point at this juncture.
Banging one's head against the keyboard does little constructive good, but it's really tempting at this point --
--
KingCheetah

just try opening it with a plain windows explorer

xmc wildchild22 said:
just try opening it with a plain windows explorer
Click to expand...
Click to collapse
Using the "Explore" option from the right-click context menu in Windows Explorer gives the following error: "The Compressed (zipped) Folder is invalid or corrupted." (Since archive files on my laptop are associated with 7zip, this is the only method by which I can access Win XP's native archive file handling.)
This has been the case with all PM59IMG.zip files--they don't register as normal zip files.
Thanks for the suggestion, though --
--
KingCheetah

hmm...maybe tht zip is corrupted because it works for me....DL this --> http://tinyw.in/Mzg2

Nope, not corrupted because it works just fine to update my phone to 1.63 (as stated before, I've done this twice now). Also, that's the exact same source from whence I downloaded my copy of the file. The PM59MG.zip for 1.55.531.3 gives exactly the same error, and I used that without difficulty as well.

KingCheetah said:
Nope, not corrupted because it works just fine to update my phone to 1.63 (as stated before, I've done this twice now). Also, that's the exact same source from whence I downloaded my copy of the file. The PM59MG.zip for 1.55.531.3 gives exactly the same error, and I used that without difficulty as well.
Click to expand...
Click to collapse
Use winrar to open the PG59IMG.zip files - that's what I used to make all the custom ones with, and also what I used to open the leaked ones we started from.
You won't be able to edit existing leaked ones, because they are locked and have an HTC signature.
Sent from a digital distance.

Thanks for the pointer, Blue, and I'll keep this in mind. But as I added to my previous post (#8), I realized that a Nandroid backup doesn't have a "system.img" file--it has a "system.ext4.tar," but not "system.img." So being able to pull anything from a PM59IMG.zip file is a moot point at this juncture.
I think I'm going to have to wait for a 1.63 ROM that can be installed through CWM rather than the PM59IMG.zip method. The DS Mod 1.55.531.3 worked well for me, and all apps/data were just there after I flashed it. Maybe I just got lucky with the process I followed previously, who knows? (http://forum.xda-developers.com/showthread.php?t=1508406&page=4 post #39)
At any rate, I've got a truly mean headache from working on this all day. Time for a break with a bit of ice on ye old cervical vertebrae.
Thanks again for chiming in --
--
KingCheetah

No prob, didn't read through and shot from the hip on the last post I saw, out at dinner and skimming the forums on smoke breaks
Sent from a digital distance.

does anyone know the deal with the implementation of tar backups? I think that came into play at some point, and I wonder if that has anything to do with anything.
I just checked a backup I made with the Modaco CWM, and the files in it are all .img files, including data. and I know for a fact I have done backups and advanced data restores with that recovery. it would be a hassle, but if you get re-energized you might make the backup and do the restore with Modaco. definitely would be a hassle if it didn't work, but you could also make a backup with Mybackup, and have that ready too, as well as probably have a data.img to try and flash thru fastboot like xmc suggested.
anyway, hopefully we'll get this all sorted out. take it easy!

well .tar are used ever since cwm started working with ext4....maybe imgs are only ext3 or lower or its just inefficient

On that note, I did use the modaco 4.0.0.9 recovery to make the nandroids I pulled the system images from to get the bases from which I de-odexed, and when finished I uploaded to my host and they are the de-odexed bases I posted in dev.
I am pretty sure I went with modaco recovery for that because cwm 5.0.2.7 output tar files and it just saved a step in the process.
If you are working with the .tar files then jump on linux to unarchive them if that's what you are trying to do.
I just ran the deodex process using windows, because the first working deodex tool I found was a windows tool.
Generally I use modaco .9 for nandroids I want to work with in windows, and cwm 5 for nandroids I want to work with in linux.
We're probably leaving the restaurant soon, if we split up I'll actually read back through the thread when I get home and see if I have anything else to add.
Sent from a digital distance.

Yogi, you're brilliant!
yogi2010 said:
I just checked a backup I made with the Modaco CWM, and the files in it are all .img files, including data. and I know for a fact I have done backups and advanced data restores with that recovery.
Click to expand...
Click to collapse
[facepalm] Of course! This is why my Advanced Restore attempt with Modaco failed--because I used the CWM 5.0.2.7 backup, which did not have the files Modaco would have referenced. Duh! I wasn't even thinking along the lines of a file type mismatch between the two recoveries. Baka baka baka...
yogi2010 said:
it would be a hassle, but if you get re-energized you might make the backup and do the restore with Modaco. definitely would be a hassle if it didn't work, but you could also make a backup with Mybackup, and have that ready too, as well as probably have a data.img to try and flash thru fastboot like xmc suggested.
Click to expand...
Click to collapse
At this point, not a hassle, but the best chance to accomplish this thing with a minimum of fuss and bother. I'll give this a shot right after a bit 'o java. Thank you, Yogi, for highlighting something that should have been obvious to me when Modaco gave the error message that "data.img" didn't exist. Oy!
However, this still leaves unanswered the question of why CWM 5.0.2.7 is tossing up the md5 mismatch error when one tries to use Advance Restore, and that files aren't seen by CWM via Advance Restore until one accesses regular Restore. Paperskye is having the exact same problem in this thread: http://forum.xda-developers.com/showthread.php?t=1624319 . Should this be brought to the attention of the CWM devs? It really seems like a rather show-stopping error for CWM...unless Advanced Restore isn't really used with 5.0.2.7 and the MT4GS. There just doesn't seem to be a good reason for the observed behavior.
Many thanks for your encouragement. I'll report back with results on the next try with Modaco --
--
KingCheetah

It's a beautiful thing!
Using Modaco for my backup prior to the update, then Advanced Restore of data afterward = perfect restore of my phone environment with 1.63 on board. Done with as little fuss as I was hoping to encounter. Yogi, you get the prize. The only thing I had to manually put back was my custom boot animation, but that's trivial.
I think I'll just leave Modaco on as my recovery for now, since AR is functional with it and CWM 5.0.2.7 is not. Makes me wonder, from just an everyday backup standpoint, is there any real advantage of CWM over Modaco? I wish there was more information on how the recovery module functions on the CWM website--I'd like to read up on it for educational purposes. Guess I'll do a Google to find more.
So ridiculously happy right now. In a stew of things going wrong, at least something went right.
Big rumbling purr of gratitude --
--
KingCheetah

[Q] Startup error - installed wrong script

To whom ever can help out, I have a Galaxy Tab 2 7.0, and cannot seem to get my problem resolved by myself. I have somehow inadvertently managed to install an update.zip that had or had no relations to this particular OS of this particular model of android.
My problem is that I wanted to be able to, migrate my apps to the external SdCard or extSdCard, and I think I used an update.zip designed for the cellphone HTC Evo 4g. Not realizing that I will be later unable to use the restore feature from a previous backup I had made using CWM 6.0.1.0 to recover from my inadvertent mistake (not to comfortable making a backup, and thinking I can restore properly anymore, like I can on my cellphone that I am spoiled with).
Silly of me to think I could use an update.zip designed for another type of device such as the HTC Evo 4g, but… (anyway my bad what was I thinking…?). The update.zip, by the way is "dtapps2sd-2.7.5.2-signed", like I mentioned this is clearly designed for the HTC Evo 4g, and not for the Samsung GT2 7.0.
The problem I experience now is not complete lose of my GT2 7.0 device I can still install and change out OS through the CWM-Recovery and install apps through the Android Market. I do however experience the inability to check my Storage properties under my Settings profile. When I attempt to click on this link it pauses for a second as if it wants to open up and perform its normal function, then reports an error "Unfortunately, Settings has stopped". Now at this point this is where I would have to mention another issue similar to this one, and that is at startup. When I first start the device up and it runs through its process of startup configuration. It will then report a list of programs that are prevented from running properly it as follows;
Unfortunately, the process android.process.media has stopped.
Unfortunately, My Files has stopped.
Unfortunately, Factory Test has stopped.
Unfortunately, MTP has stopped.
Now my question is, how is-it possible to resolve this issue. I have tried to complete a fresh install of the OS, CWM-Recovery, and also attempted to wipe everything possible that the recovery will allow, but I am not expecting much, as I cannot even get the backup and restore feature to work efficiently enough to provide me with what I need it to do…
I have provided this post with a download of the update.zip I used as well as the version of the OS I have provided my Samsung GT2 7.0. If anyone can shine some insight on what direction I should attempt to do to resolve this issue I would be more that interested to take a look at what I could use to correct this error of mine…
-Samsung GT2 7.0 - OS (Use the Download link above the Rosewell signature)
http://forum.xda-developers.com/showthread.php?t=1784318
-dtapps2sd-2.7.5.2-signed
http://www.mediafire.com/?7jpc5oudzt6o76p
I might be comfortable to ADB Shell into my device to make changes, or if one was able provide me an update.zip/script that would be great. Also is there a better recovery out there than the ClockWorkRecovery.

Better recovery so you may try twrp or so
Try install a fresh firmware preferably with a pit file from odin pc
Sent from my GT-I9300 using xda app-developers app

Mohamedselim said:
Better recovery so you may try twrp or so
Try install a fresh firmware preferably with a pit file from odin pc
Click to expand...
Click to collapse
Mohamedselim, Thanks...
Will look into this..., any links by the way in regards to the "fresh firmware with a pit file"...?

Have you tried downloading and flashing a full Odin tar file to restore your device to stock?

imnuts said:
Have you tried downloading and flashing a full Odin tar file to restore your device to stock?
Click to expand...
Click to collapse
Yeap...!, I have tried this already, have had no promising results...

This is the only compatible version of a .pit file...;
http://forum.xda-developers.com/showthread.php?t=1642744
Can anyone provide me another one for the GT-p3113...?

Just checking in..., and wondering if anyone has a solution for this...?

Factory reset in stock recovery. So Odin a stock Rom and before u install anything custom, do a factory reset in recovery after u Odin back to stock. Then flash away.
I imagine you have alrdy tried a factory reset using a custom recovery.

WAIT!!! You don't have to factory reset, just reboot into CWM recovery ang go to mounts and storage>wipe internal storage. Confirm and reboot. You will lose anything on the sdcard but your apps will stay.

RomsWell said:
Factory reset in stock recovery. So Odin a stock Rom and before u install anything custom, do a factory reset in recovery after u Odin back to stock. Then flash away.
I imagine you have alrdy tried a factory reset using a custom recovery.
Click to expand...
Click to collapse
MultipleMonomials said:
WAIT!!! You don't have to factory reset, just reboot into CWM recovery ang go to mounts and storage>wipe internal storage. Confirm and reboot. You will lose anything on the sdcard but your apps will stay.
Click to expand...
Click to collapse
1. I am all over the Factory resets, and wipes.
2. Already tried Stock Rom(s).
3. I believe my problem is a bootloader, or partitioning script. (As this denies me access from inside settings>storage where I can view my allocated size, and Restore to Factory button. In addition in CWM, I am not allowed to mount/sdcard(internal), extSdCard is ok though. Also, I cannot plug Tab via USB to check contains on Internal or External sdcard, but I can remove the External to transfer data from it via sdcard slot on PC...)
Maybe you can recommend a good Stock Rom, so I can give that ago...
I was in the process last night, and could not get a good connection with Heimdall or Odin. I am now looking into driver issues, so...

Ok, so I was successful in taking RomsWell and MultipleMonomials advice, and was able to return my device back to "Normal" state, including "Stock Recovery". But I still have the original problem as in my request I asked in my first post...
I do however experience the inability to check my Storage properties under my Settings profile. When I attempt to click on this link it pauses for a second as if it wants to open up and perform its normal function, then reports an error "Unfortunately, Settings has stopped". Now at this point this is where I would have to mention another issue similar to this one, and that is at startup. When I first start the device up and it runs through its process of startup configuration. It will then report a list of programs that are prevented from running properly it as follows;
Unfortunately, the process android.process.media has stopped.
Unfortunately, My Files has stopped.
Unfortunately, Factory Test has stopped.
Unfortunately, MTP has stopped.
Click to expand...
Click to collapse
I think now, if I cannot get a sizable remedy..., is just to try and send it in Samsung so they can take a look at it...
Any suggestions...?
FYI; I have also tried connecting to Kies, but due to the inability to posses a "MTP" (Media Transfer Protocol), is the reason I cannot connect to my SdCard & extSdCard. I can "PTP" (Picture Transfer Protocol) into it, using "adb shell", but not using "MTP"...
So I do not know how much "MTP" has to do with this relationship of the other three items that I mentioned in my bullet list in my quote, but...
Anyway, I don't know what I am trying to say, but thank you two, for getting me this far...!

grassy-sneakers said:
1. I am all over the Factory resets, and wipes.
2. Already tried Stock Rom(s).
3. I believe my problem is a bootloader, or partitioning script. (As this denies me access from inside settings>storage where I can view my allocated size, and Restore to Factory button. In addition in CWM, I am not allowed to mount/sdcard(internal), extSdCard is ok though. Also, I cannot plug Tab via USB to check contains on Internal or External sdcard, but I can remove the External to transfer data from it via sdcard slot on PC...)
Maybe you can recommend a good Stock Rom, so I can give that ago...
I was in the process last night, and could not get a good connection with Heimdall or Odin. I am now looking into driver issues, so...
Click to expand...
Click to collapse
Did you try formatting internal storage in CWM?

MultipleMonomials said:
Did you try formatting internal storage in CWM?
Click to expand...
Click to collapse
I am not quite confident on how much this will work. As I have tried this multiple times to wipe "Wipe Factory/Data", "Wipe Cache", including all the partitions under the "Advance" section found in CWM Recovery. Even using TWRP Recovery.
Per this post; I just attempted to flash a "Stock Rom", but not before doing a factory/data, cache wipe using "Stock Recovery", including after a successful install...
No luck, the same problem still exist as above...

Ok, this was all just the rudest experience I put my self threw. As I have an HTC Evo 4g - cellphone and have become comfortable with installing ROM's, Kernels, and Updates.zips, as well as, other modification. All threw the Recovery designed for this particular device, and don't get me wrong there has been a couple of times. Maybe more than a couple, more like a few times I have installed incompatible downloads I find in the XDA forums. Which makes this screw up, difficult form me to know that as long as you can get into a Download/Bootloader or a modified Recovery designed for a particular device that was successful flashed correctly. Well the screw up are easily redeemed/recoverable.
So, to make a long story short. After having called Samsung Customer Care (the 1-800-SAMSUNG) number, it seems to have been a External SdCard getting in my way from having been real short from sending my Tab off to the repair department (where ever it is...). I in fact already had it in an envelope, all I needed was an address to send it to. Anyway the nice person on the other side of the phone requested that I remove my External SdCard, and confirm that I was able to get into my "Storage" tab under my settings. Well after success getting this option back, I then made the suggestion that maybe my Eternal SdCard is corrupt or incorrectly formatted. She then agreed maybe this is the case. After ending the phone call. I quickly restarted my Tab, again only to find out that I was no longer receiving the error messages like mentioned above, which is great, because after multiple flashes of "Stock Roms w/Stock Recovery", and forcing myself to believe that it was a system install error. It in fact the External SdCard in place preventing me from throwing my Tab against the wall / in the mail to Samsung Repair Center...
"Man what an ordeal...!!!"
Thanks to all that helped with the suggestions, as to what direction I most defiantly tried.
I am now in the process, since I am living back in Stock mode. To receive an OTA (Over The Air) Update, and am still in the process of seeing if this thing still possess any residual silent errors...
I will keep you posted.
If not, well it off to happy rooting for me...!!!

That is it, my problem is resolved. Damnedest thing this problem of mine, it seems the only thing I screwed up was the micro SdCard. to the point it was the cause of all the error I received when I started up the device, as well as when I attempted to access my storage through me settings options...!!!
Now re-rooted, and a happy camper, Cheers...!

[Q] Unfortunately Launcher has stopped and other issues

Hi guys,
I've been reading you for a while, but this is actually my first post.
Currently stuck with a "Unfortunately, Launcher has stopped" on my tablet, with no access to any menus except my Settings. The menu bar (back, home and multitasking) is now gone. I've got my keyboard to navigate, but something in the display is also quite wrong, image seems to be zoomed, or set at the wrong resolution. Tried to search on the forum, but all posts found were not about the same rom or the same issue. Sorry if I missed one.
Here's a little background story:
I've rooted my TF300T about a month ago and installed Hydro 4.1. It has been working very well since then, but in the last days, I thought that my tablet felt a little slower than usual, so I started searching if an update to 4.2 was available.
I'm not sure if this is what caused the issue or not, but I went into my "Power button" menu and went into "Recovery" mode (instead of Shutdown, reboot, etc.), which then restarted my unit into TWRP menu.
I then selected the "System" submenu and simply touched "Reboot". (terms might not be exact). At the first reboot, I got the problems that I described.
Can't do much, popup keeps appearing on my screen. I haven't tried yet to clear the cache of my Launcher, which I'm trying to avoid as I would prefer to avoid rearranging 5 pages of icons, but between that and reinstalling everything, obviously I prefer to simply lose my display preferences.
Can anyone help me about what caused my issue, and what can I do now?
Here are 2 screenshots that I took, showing that my bottom menu is missing and that the fonts aren't set right (clock and left icon). Also, my notifications menu now appears near the middle of my screen.
EDIT: I unfortunately cannot post links yet
I remember installing an app (with root access) that gave me a menu about my resolution. One thing that I'm wondering, could it be that the resolution got changed and I simply never rebooted since the change, which now caused my Launcher to crash? How can I launch an app without having access to the app menu?
Thanks in advance for your help.

irepressed said:
Hi guys,
I've been reading you for a while, but this is actually my first post.
Currently stuck with a "Unfortunately, Launcher has stopped" on my tablet, with no access to any menus except my Settings. The menu bar (back, home and multitasking) is now gone. I've got my keyboard to navigate, but something in the display is also quite wrong, image seems to be zoomed, or set at the wrong resolution. Tried to search on the forum, but all posts found were not about the same rom or the same issue. Sorry if I missed one.
Here's a little background story:
I've rooted my TF300T about a month ago and installed Hydro 4.1. It has been working very well since then, but in the last days, I thought that my tablet felt a little slower than usual, so I started searching if an update to 4.2 was available.
I'm not sure if this is what caused the issue or not, but I went into my "Power button" menu and went into "Recovery" mode (instead of Shutdown, reboot, etc.), which then restarted my unit into TWRP menu.
I then selected the "System" submenu and simply touched "Reboot". (terms might not be exact). At the first reboot, I got the problems that I described.
Can't do much, popup keeps appearing on my screen. I haven't tried yet to clear the cache of my Launcher, which I'm trying to avoid as I would prefer to avoid rearranging 5 pages of icons, but between that and reinstalling everything, obviously I prefer to simply lose my display preferences.
Can anyone help me about what caused my issue, and what can I do now?
Here are 2 screenshots that I took, showing that my bottom menu is missing and that the fonts aren't set right (clock and left icon). Also, my notifications menu now appears near the middle of my screen.
EDIT: I unfortunately cannot post links yet
I remember installing an app (with root access) that gave me a menu about my resolution. One thing that I'm wondering, could it be that the resolution got changed and I simply never rebooted since the change, which now caused my Launcher to crash? How can I launch an app without having access to the app menu?
Thanks in advance for your help.
Click to expand...
Click to collapse
What you describe is likely caused by changing the resolution. Are you still running hydro 4.1?
You can likely recover by replacing your build.prop or editing the one you now have. build.props are usualy rom specific so you need one from the rom you are using.

tobdaryl said:
What you describe is likely caused by changing the resolution. Are you still running hydro 4.1?
You can likely recover by replacing your build.prop or editing the one you now have. build.props are usualy rom specific so you need one from the rom you are using.
Click to expand...
Click to collapse
Yes, still using Hydro 4.1. I do have a build.prop editor installed on my tablet, but since I can't launch app, I don't know how to do it.
I'll try to connect the tablet to my PC and see if I can get access to my file from there.
Thanks!

irepressed said:
Yes, still using Hydro 4.1. I do have a build.prop editor installed on my tablet, but since I can't launch app, I don't know how to do it.
I'll try to connect the tablet to my PC and see if I can get access to my file from there.
Thanks!
Click to expand...
Click to collapse
I'm presently downloading 4.1 hydro to retrieve the build.prop. If you unzip it the build.prop is /system/build.prop also located there on your tab. I have another fifteen minutes to download if you wish for me to supply the file!

tobdaryl said:
I'm presently downloading 4.1 hydro to retrieve the build.prop. If you unzip it the build.prop is /system/build.prop also located there on your tab. I have another fifteen minutes to download if you wish for me to supply the file!
Click to expand...
Click to collapse
If you could, I would appreciate it!
Only thing left, how can I send the file to my TF300T without access to my apps? I'm currently trying to cheat by opening my apps using the Share feature with screenshots taken, but so far, no success.

irepressed said:
If you could, I would appreciate it!
Only thing left, how can I send the file to my TF300T without access to my apps? I'm currently trying to cheat by opening my apps using the Share feature with screenshots taken, but so far, no success.
Click to expand...
Click to collapse
We should be able to push with adb, set permissions, and reboot.
---------- Post added at 04:58 PM ---------- Previous post was at 04:36 PM ----------
http://www.mediafire.com/?tk3cifzci0vw24e
place the build.prop from the zip file into the directory with fastboot.
Open terminal or cmd in the directory with fastboot.
Boot into twrp – twrp provides adb access by default.
Use twrp mount menu and check mount system.
Then type
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
in twrp reboot system
type
adb kill-server

tobdaryl said:
We should be able to push with adb, set permissions, and reboot.
---------- Post added at 04:58 PM ---------- Previous post was at 04:36 PM ----------
place the build.prop from the zip file into the directory with fastboot.
Open terminal or cmd in the directory with fastboot.
Boot into twrp – twrp provides adb access by default.
Use twrp mount menu and check mount system.
Then type
adb push build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
in twrp reboot system
type
adb kill-server
Click to expand...
Click to collapse
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?

irepressed said:
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
Click to expand...
Click to collapse
Ok, I just killed my adb.exe, tried the command again and that got rid of the out of date error.
But, still stuck with the "device not found".

irepressed said:
Ok, my Fastboot folder is currently at the root of my C drive on my PC
I entered your command and got after the first one "adb server is out of date. killing...
* daemon started successfully *
error: device not found
FYI, before I got your last post, I used Android commander to push the build.prop that I still had on my PC when I installed the custom hydro 4.1 rom.
After my reboot, I got the Asus logo, than a black screen that does nothing.
I then rebooted in Fastboot and followed your instructions.
So now, it seems that my pc doesnt see my tablet anymore when in TWRP. is this normal? Do I need to restart it after checking "Mount system"?
Click to expand...
Click to collapse
Slowdown, I'm getting behind. I'm willing to help but you are now worse off than before.
Sit tight for five minutes and I'll try to give you a twrp flashable zip for your build.prop and hope that is the extent of the damage.
If not we'll try to go from there.
http://www.mediafire.com/?ybplc1ws8uvskhf
This is a twrp flashable zip that only replaces your build.prop with the one from hydro 4.1.

tobdaryl said:
Slowdown, I'm getting behind. I'm willing to help but you are now worse off than before.
Sit tight for five minutes and I'll try to give you a twrp flashable zip for your build.prop and hope that is the extent of the damage.
If not we'll try to go from there.
This is a twrp flashable zip that only replaces your build.prop with the one from hydro 4.1.
Click to expand...
Click to collapse
Alright, I'll wait for your answer before trying anything else.
So now, I've got your latest .zip file.
Still can't see my TF300T from my PC, so, ADB is a no go for now.
In fact, I do see it in the Device Manager, but since my last reboot, it now shows an exclamation mark on it as if my drivers weren't good.
Since you mentioned the file is a flashable zip, I'm guessing that I can flash it using TWRP without going through my PC?
Can you give me precise info on that, since I do not want to mess with my system more than I already did.
Thanks

irepressed said:
Alright, I'll wait for your answer before trying anything else.
So now, I've got your latest .zip file.
Still can't see my TF300T from my PC, so, ADB is a no go for now.
In fact, I do see it in the Device Manager, but since my last reboot, it now shows an exclamation mark on it as if my drivers weren't good.
Since you mentioned the file is a flashable zip, I'm guessing that I can flash it using TWRP without going through my PC?
Can you give me precise info on that, since I do not want to mess with my system more than I already did.
Thanks
Click to expand...
Click to collapse
Look at the bottom of my previous post. You will find a new link there. Just flash with twrp and reboot. Don't worry about wiping or any of that, just flash and reboot.

tobdaryl said:
Look at the bottom of my previous post. You will find a new link there. Just flash with twrp and reboot. Don't worry about wiping or any of that, just flash and reboot.
Click to expand...
Click to collapse
Yep, that's the file I was talking about.
I now need to flash and reboot, your file is at the root of an SDcard in my TF300T, I go through the Install menu and then, can't seem to view the content of my sdcard. Tried to mount it first but can't select it either, it will simply stay on "Internal Storage".
EDIT: The RCK icon is the only one right now that boots me into something. If I try the USB icon, it just stays on that screen forever.

Trash the two zips you have downloaded. I'm providing a new one for when we get back to that point. And there will be no doubt about which zip you are using.
http://www.mediafire.com/?hagehu5qu5ky6sf
OK. First I'll explain your earlier comment about adb being old. Twrp expects a recent adb or refuses to allow adb access ( we'll not worry at the moment about that but it is something you need to address later (I hope).
If you have a cord between your tablet and pc remove it. The sdcard may be mounted as data on the pc and not allow twrp to mount it.
You have been using this sdcard prior to this exercise?
Do you have any backups or flashable zips or anything of that nature on your internal sdcard?
If so what?

tobdaryl said:
Trash the two zips you have downloaded. I'm providing a new one for when we get back to that point. And there will be no doubt about which zip you are using.
OK. First I'll explain your earlier comment about adb being old. Twrp expects a recent adb or refuses to allow adb access ( we'll not worry at the moment about that but it is something you need to address later (I hope).
If you have a cord between your tablet and pc remove it. The sdcard may be mounted as data on the pc and not allow twrp to mount it.
You have been using this sdcard prior to this exercise?
Do you have any backups or flashable zips or anything of that nature on your internal sdcard?
If so what?
Click to expand...
Click to collapse
Zips trashed, kept only the one provided in your latest answer.
No cord between PC and tablet. Still unable to click on "Using external SD" or "Mount SDCard". It simply won't let me check the box or switch the bullet.
As for using this SDcard before, yes in a PC, but no, first time in my Asus. Also tried with another one just in case and same result.
As for backups and flashable zips, I kept everything from when I did my root and rom install.
I do know that I have a backup in the Restore menu of TWRP, which seems about the time I installed it. I suppose I could simply do a restore and avoid additional headaches, but my question is, what exactly will it restore? At this point, I'm mentally prepared to go back to what I had after installing Hydro 4.1, as long as I can use the tablet ASAP.

Asap = restore your backup.
If I'm restoring a different rom I'll wipe Cache, Dalvik Cache, and Factory Reset. If the backup is from the same rom I'm flashing and I want to keep the apps I have Installed since the backup I won't Factory Reset.
Good Luck!

tobdaryl said:
Asap = restore your backup.
If I'm restoring a different rom I'll wipe Cache, Dalvik Cache, and Factory Reset. If the backup is from the same rom I'm flashing and I want to keep the apps I have Installed since the backup I won't Factory Reset.
Good Luck!
Click to expand...
Click to collapse
So, I did the restore, and I'm up and running, but, no more Hydro 4.1. I guess my backup was probably what got done right before the installed it.
The good thing is, my tablet is working again and my root is still active. The bad part is that I'm gonna have to dig my head again in all the tutorials and try to find the best one.
Hey, I wanted to say a huge thank you for all your help, if it wasn't for guys like you, newbies like me would be stuck with useless thin computers.

irepressed said:
So, I did the restore, and I'm up and running, but, no more Hydro 4.1. I guess my backup was probably what got done right before the installed it.
The good thing is, my tablet is working again and my root is still active. The bad part is that I'm gonna have to dig my head again in all the tutorials and try to find the best one.
Hey, I wanted to say a huge thank you for all your help, if it wasn't for guys like you, newbies like me would be stuck with useless thin computers.
Click to expand...
Click to collapse
Great I'm glad you are happy. I had hoped for the outcome you expressed but this works also.
You're welcome!

Problem with PhilZ recovery!

Hello,
I thought of myself as a pretty experienced user, but you never learn enough!
However, I flashed some roms (lollipop) that, probably due to my mistakes, screwed up my file system, to the point that my recovery (latest PhilZ) wasn't able to find its backup anymore. Eventually I solved the problem as I was able to find my backups and use them to revert my phone to the rom I wanted to run (Carbon 4.4.4). But I was really annoyed by the fact that my file system was a bit off and still I was having problems with the recovery. So I decided to begin investigating the possibility to restore my phone to factory default. Before going with it, I tried the soft approach, i.e. I used the soft factory reset available from the settings menu. It all seemed fine and I re-flashed a lollipop rom that suited me.
Now the problem is that, after all the ordeal, I decided to make a new backup and so I did. It appears all fine, my recovery can actually "see" it, but I cannot identify it using a root browser! It seems to have disappeared unless I open the recovery and then I see it there. It is located in a folder that I can, of course, access, but,when I do so, I can't find the file!
I tried to put on my phone an old backup (always a PhilZ one), but when I try to put it on the phone I can't find the Backup folder in the Clockworkmod folder!
Anyone has any idea of what is going on and can give me a suggestion on how to overcome the problem?
Thanks
Luca
PS An alternative would be suggesting how to do a restore from a sideload: I thought I saw a similar option, but I can't seem to find it anymore within the recovery's options! I tried also restoring via NRT, but although all seem to go fine and the software return no failure notice, I can't find the backup file that should have been pushed (successfully) on my device!

Its not a recovery issue. Its an L issue.
Best thing to do would be to wipe data and storage then fastboot flash userdata.IMG
http://forum.xda-developers.com/showthread.php?t=2938749

rootSU said:
Its not a recovery issue. Its an L issue.
Best thing to do would be to wipe data and storage then fastboot flash userdata.IMG
http://forum.xda-developers.com/showthread.php?t=2938749
Click to expand...
Click to collapse
Thanks a lot for your help.
How can I find the img. file to flash?
Would it be ok to just go ahead and start from 0 using this:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
How can fastboot flash an image file? I've never done that before! As I said, been doing this for a while, but never done this before...I think!
Luca

Alas, after reading your post on one-click toolkits, I'm afraid I'm one of those who thinks they can do things, but rely on simple tools to do them. However, I never (almost never) forgot to make a nandroid backup before flashing a new rom and, to be honest, I'm not a flashoolic. I never, ever bricked my phone (got a few bootloops). If I find a rom that suits my need, I stick with it for as long as I can.
The changes between KK and L are such that are beyond my comprehension, but I try hard to solve the problems I have without bugging everyone at the first obstacle. But now, after fidgeting with my phone for 2 days, I had to give up. With a few words, you singled out the reason why I couldn't come on top of this: things change and I was not informed of how much they did!
Luca

Problem partially solved..I think! Now I can see the folder and found my backup!!
I used the restorecon command you suggested. I couldn't make it work using terminal emulator (just did not accept the su command: why I don't really know). Then I thought about using adb shell via pc and, I really surprised myself; I was able to pull it through. I'm not totally brain damaged as I felt when I couldn't even reproduce the command you indicated. It is probably the application that doesn't work. It was my first time with adb shell, so a new thing learned.
However, now I would like to ask you: if I place in the proper folder the backup folder I saved on my pc, will I be able to restore the nandroid backup? I just need some data that I forgot (trivial things, such as text messages and a few app data, like passwords and stuff) but it would be useful.
Thanks once more for your help.
Luca

Possibility to return to STOCK ATT ROM after KDZ flash of PR version?

I'm noticing that FlashFire has the option to backup the system parition file based. I'm wondering if someone who has flashed the PR ROM could simply do a restore of a STOCK ATT system partition backed up this way and if it would work? If anyone wants to try, I can make a backup and upload it and post a link.. Let me know!

petermg said:
I'm noticing that FlashFire has the option to backup the system parition file based. I'm wondering if someone who has flashed the PR ROM could simply do a restore of a STOCK ATT system partition backed up this way and if it would work? If anyone wants to try, I can make a backup and upload it and post a link.. Let me know!
Click to expand...
Click to collapse
Sounds like a hard brick waiting to happen.

uly609 said:
Sounds like a hard brick waiting to happen.
Click to expand...
Click to collapse
Yeah.. probably right. It was real late when I posted that LOL

Actually doing a system restore via file based shouldn't hard brick the phone. Only if it was raw based possibly, but either way it would only be the system position so the kdz/tot would still be able to be flashed to the phone as before. This might work! Or at least be a good base to try.

petermg said:
Actually doing a system restore via file based shouldn't hard brick the phone. Only if it was raw based possibly, but either way it would only be the system position so the kdz/tot would still be able to be flashed to the phone as before. This might work! Or at least be a good base to try.
Click to expand...
Click to collapse
I agree with this theory. It should only flash the system over the system. You would have to make sure the boot loader is correct for the system rom. So say a 10b bootloader for an equivalent 10bPR rom.
(If any of the above is confusing or slightly off, I blame it on the fact I have been battling a bad virus this week with a bad headache.)
I just warrantied my PR rom device a few weeks ago, or else I would have tried this for you.
Edit: You would also have to edit the script in the file to flash to designate the correct partition to flash the system to.

CAG-man said:
I agree with this theory. It should only flash the system over the system. You would have to make sure the boot loader is correct for the system rom. So say a 10b bootloader for an equivalent 10bPR rom.
(If any of the above is confusing or slightly off, I blame it on the fact I have been battling a bad virus this week with a bad headache.)
I just warrantied my PR rom device a few weeks ago, or else I would have tried this for you.
Edit: You would also have to edit the script in the file to flash to designate the correct partition to flash the system to.
Click to expand...
Click to collapse
Unless it just extracts the tar'd files it copied from the system partition of the stock device. Still some ambiguity regarding that app. For example, it shows no option to allow me to make backups on the external SD card...

petermg said:
Unless it just extracts the tar'd files it copied from the system partition of the stock device. Still some ambiguity regarding that app. For example, it shows no option to allow me to make backups on the external SD card...
Click to expand...
Click to collapse
I would think it still needs an address as to where to put the extracted files.
I will look and see if I have any twrp backups on my computer from some of the roms I made. I have never fully looked through and studied the backups as much as I used them for system dumps. It just seems to make since that the recovery would need to know where to write the system files. Just flashing an app is alright without the address.
In writing the flashing script for ROMs, I have always had to give the recovery the address as to where to write the system files or else it would result in a flash failure or soft brick.
I may be writing my scripts wrong too. I just know what works for me.