Database Info

(FROYO) VPN Still Broken (PPTP with encryption)

Sigh,
AoN

i think this should be in the general section.

What level of encryption is the server using?
Sent from my SAMSUNG-SGH-I897 using XDA App

You server must have some strange encryption, pptp has worked for me since day one

Is there a logfile generated somewhere on the phone, which would tell what level of encryption is being used for a particular vpn server? I'm trying to connect to work.
Thanks,
AoN

anneoneamouse said:
Is there a logfile generated somewhere on the phone, which would tell what level of encryption is being used for a particular vpn server? I'm trying to connect to work.
Thanks,
AoN
Click to expand...
Click to collapse
Same with DG, PPTP with Encryption worked and tested. Logged onto my servers via VNC no problem.

I have always had an issue as well. I think it has to do with routes. I am able to connect but can't ping or route any traffic anything behind the router.
Here's my setup:
-Phone's Wifi IP (eth0): 172.20.21.61
-IP for PPTP VPN connection(ppp0): 10.0.0.2
-Subnet at VPN location: 192.168.1.0/24
Here is my route tables:
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255 UH 0 0 0 ppp0
172.20.21.0 192.168.1.1 255.255.255.128 UG 0 0 0 ppp0
172.20.21.128 192.168.1.1 255.255.255.128 UG 0 0 0 ppp0
172.20.21.0 * 255.255.255.0 U 0 0 0 eth0
Default 192.168.1.1 128.0.0.0 UG 0 0 0 ppp0
128.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 ppp0
Default 172.20.21.1 0.0.0.0 UG 0 0 0 eth0
Fyi: The VPN works fine from my desktop and old iPhone.

techniq35 said:
I have always had an issue as well. I think it has to do with routes. I am able to connect but can't ping or route any traffic anything behind the router.
Here's my setup:
-Phone's Wifi IP (eth0): 172.20.21.61
-IP for PPTP VPN connection(ppp0): 10.0.0.2
-Subnet at VPN location: 192.168.1.0/24
Here is my route tables:
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255 UH 0 0 0 ppp0
172.20.21.0 192.168.1.1 255.255.255.128 UG 0 0 0 ppp0
172.20.21.128 192.168.1.1 255.255.255.128 UG 0 0 0 ppp0
172.20.21.0 * 255.255.255.0 U 0 0 0 eth0
Default 192.168.1.1 128.0.0.0 UG 0 0 0 ppp0
128.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 ppp0
Default 172.20.21.1 0.0.0.0 UG 0 0 0 eth0
Fyi: The VPN works fine from my desktop and old iPhone.
Click to expand...
Click to collapse
I know that Windows 2008 Server has some weird stuff going on with their VPN servers.... I connect from ATT wireless to an external static ip address on the router which listen/routes the PPTP port to my Windows 2008 Server with external ipaddress for authentication and stuff....
Try using the ATT wireless instead of the 172.20.x.x address.... see if it gets your further....

techniq35 said:
I have always had an issue as well. I think it has to do with routes. I am able to connect but can't ping or route any traffic anything behind the router.
Here's my setup:
-Phone's Wifi IP (eth0): 172.20.21.61
-IP for PPTP VPN connection(ppp0): 10.0.0.2
-Subnet at VPN location: 192.168.1.0/24
Here is my route tables:
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255 UH 0 0 0 ppp0
172.20.21.0 192.168.1.1 255.255.255.128 UG 0 0 0 ppp0
172.20.21.128 192.168.1.1 255.255.255.128 UG 0 0 0 ppp0
172.20.21.0 * 255.255.255.0 U 0 0 0 eth0
Default 192.168.1.1 128.0.0.0 UG 0 0 0 ppp0
128.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 ppp0
Default 172.20.21.1 0.0.0.0 UG 0 0 0 eth0
Fyi: The VPN works fine from my desktop and old iPhone.
Click to expand...
Click to collapse
Can you ping the other end of the tunnel? (10.0.0.1, I'm assuming?)
Your gateway for traffic through the tunnel should be something on the same subnet as 10.0.0.2. The 192.168.1.1 wont be reachable because you have no interfaces on that subnet.

Any (recent) luck with this? Seems that ppp wasn't originally compiled with mppe-128 support. The latest update from Samsung (I897UCKB1) hasn't improved things either.
Anyone know whether any of the ROMS here have a recompiled ppp component?
Thanks,
AoN

Android and OpenVPN

Running android-openvpn-settings on Das BAMF 1.8.6 rooted thunderbolt.
My config file:
Code:
remote mine.dyndns.org 443
client
proto tcp
nobind
dev tap
comp-lzo
verb 4
log /sdcard/openvpn/openvpn.log
resolv-retry infinite
persist-key
persist-tun
redirect-gateway def1
dhcp-option DNS 192.168.1.1
route-gateway 192.168.1.1
route-delay 10
ns-cert-type server
key-direction 1
ca "camine.crt"
cert "mine2.crt"
Had to manually add this route for the log file to be free of errors. route-default would cause some route add/del's that would give Invalid Parameter or No Such Process errors since 192.168.1.0 wasnt anywhere in the table. So running this before opening the VPN tunnel got rid of the errors:
Code:
busybox route add -net 192.168.1.0 netmask 255.255.255.0 rmnet_sdio0
Heres what my routing table looks like after android-openvpn-settings runs and says the tunnel is open:
Code:
# busybox route -n
busybox route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
98.249.31.333 192.168.1.1 255.255.255.255 UGH 0 0 0 rmnet_sdio0
98.249.31.333 10.189.54.12 255.255.255.255 UGH 0 0 0 rmnet_sdio0
10.189.54.11 0.0.0.0 255.255.255.240 U 0 0 0 rmnet_sdio0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 rmnet_sdio0
0.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 rmnet_sdio0
128.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 rmnet_sdio0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 rmnet_sdio0
0.0.0.0 10.189.54.12 0.0.0.0 UG 0 0 0 rmnet_sdio0
No clue if the table is OK now. One weird thing is I can't ping through tun0 at all. Don't see tun0 in ifconfig either... Did I miss some huge step?
Code:
# ping -c 1 -I tun0 192.168.1.1
ping -c 1 -I tun0 192.168.1.1
ping: unknown iface tun0
only background I have is with that config (except redirect-gateway instead of redirect-gateway def1) used to work on my old WM phone.
Anyone have any ideas? Let me know if I can provide any more details... Ive been racking my brain on this the past couple of days. Out of ideas.

Bump. Any ideas?

Maybe my Tun setup is wrong? Where is tun.ko located on Das BAMF 1.8.6? The location in the android-openvpn-settings just says "tun"

A few things to try:
1) Change the symlinks /system/bin/ifconfig and /system/bin/route to point to /system/xbin/busybox instead of toolbox
2) Once the tunnel is established, try these commands in a terminal:
ip ru del table gprs
ip ru del table wifi

After "connecting" with android-openvpn-settings then running
Code:
netcfg tap0 dhcp
in a terminal openvpn works.
Still have no clue about CM7 built in OpenVPN and the broken tunnel message.

[Q] Automatic headphone icon toggles On And OFF - Desire HD

I installed jellytime beta11 on my Andoird DHD A9191 with updated gapps, full wiped.
When previously i installed Beta 10 i got an issue which is still not solved till now.
My headset toggles on and off and is being detected easily in the link shared below . I flash different roms , icecold sanwitch 8x different versions as well, full wiped and did everything to solve this out but didnt find solution.
Logcat :
V/WiredAccessoryObserver( 1649): Headset UEVENT: {SUBSYSTEM=switch, SWITCH_STATE
=0, DEVPATH=/devices/virtual/switch/h2w, SEQNUM=14406, ACTION=change, SWITCH_NAM
E=Headset}
V/WiredAccessoryObserver( 1649): updateState name: Headset state 0
V/WiredAccessoryObserver( 1649): updateState switchState: 0
I/HeadsetService(17553): Headset=true; Bluetooth=false
V/WiredAccessoryObserver( 1649): newState = 0, headsetState = 0,mHeadsetState =
1
V/WiredAccessoryObserver( 1649): device Headset disconnected
I/HeadsetService(17553): Selected configuration: headset
I/Effect-DRC( 1620): Compression factor set to: 1.000000
I/Effect-BassBoost( 1620): New strength: 0
I/Effect-Equalizer( 1620): Setting band 0 to 0
I/Effect-Equalizer( 1620): Setting band 1 to 0
I/Effect-Equalizer( 1620): Setting band 2 to 0
I/Effect-Equalizer( 1620): Setting band 3 to 0
I/Effect-Equalizer( 1620): Setting band 4 to 0
I/Effect-Equalizer( 1620): Setting loudness correction reference to 100.000000 d
B
I/HeadsetService(17553): Headset=true; Bluetooth=false
V/WiredAccessoryObserver( 1649): Headset UEVENT: {SUBSYSTEM=switch, SWITCH_STATE
=1, DEVPATH=/devices/virtual/switch/h2w, SEQNUM=14407, ACTION=change, SWITCH_NAM
E=Headset}
V/WiredAccessoryObserver( 1649): updateState name: Headset state 1
V/WiredAccessoryObserver( 1649): updateState switchState: 1
V/WiredAccessoryObserver( 1649): newState = 1, headsetState = 1,mHeadsetState =
0
V/WiredAccessoryObserver( 1649): device Headset connected
I/HeadsetService(17553): Headset=false; Bluetooth=false
I/HeadsetService(17553): Selected configuration: speaker
I/Effect-DRC( 1620): Compression factor set to: 1.000000
I/Effect-BassBoost( 1620): New strength: 0
I/Effect-Equalizer( 1620): Setting band 0 to 0
I/Effect-Equalizer( 1620): Setting band 1 to 0
I/Effect-Equalizer( 1620): Setting band 2 to 0
I/Effect-Equalizer( 1620): Setting band 3 to 0
I/Effect-Equalizer( 1620): Setting band 4 to 0
I/Effect-Equalizer( 1620): Setting loudness correction reference to 100.000000 d
B
dmsg :
<6>[12151.716247] [HS_MGR] (insert_detect_work_func) HEADSET_MIC (08-10 16:40:54
.684)
<6>[12151.920501] [HS_MGR] (remove_detect_work_func) Waiting for HPIN stable
<6>[12152.730590] [AUD] htc_acoustic_7x30: enable_mic_bias called 0
<6>[12152.730957] [AUD] board_spade_audio: spade_mic_enable: 0, shift 1
<6>[12152.737792] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12152.738769] [HS_MGR] (remove_detect_work_func) Remove 3.5mm accessory (08-
10 16:40:55.707)
<6>[12153.231750] [AUD] htc_acoustic_7x30: enable_mic_bias called 1
<6>[12153.232421] [AUD] board_spade_audio: spade_mic_enable: 1, shift 1
<6>[12153.233673] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12153.445617] [HS_MICROP] (headset_microp_remote_adc) Remote ADC 874 (0x36A)
<6>[12151.716247] [HS_MGR] (insert_detect_work_func) HEADSET_MIC (08-10 16:40:54
.684)
<6>[12151.920501] [HS_MGR] (remove_detect_work_func) Waiting for HPIN stable
<6>[12152.730590] [AUD] htc_acoustic_7x30: enable_mic_bias called 0
<6>[12152.730957] [AUD] board_spade_audio: spade_mic_enable: 0, shift 1
<6>[12152.737792] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12152.738769] [HS_MGR] (remove_detect_work_func) Remove 3.5mm accessory (08-
10 16:40:55.707)
<6>[12153.231750] [AUD] htc_acoustic_7x30: enable_mic_bias called 1
<6>[12153.232421] [AUD] board_spade_audio: spade_mic_enable: 1, shift 1
<6>[12153.233673] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12153.445617] [HS_MICROP] (headset_microp_remote_adc) Remote ADC 874 (0x36A)
<6>[12151.716247] [HS_MGR] (insert_detect_work_func) HEADSET_MIC (08-10 16:40:54
.684)
<6>[12151.920501] [HS_MGR] (remove_detect_work_func) Waiting for HPIN stable
<6>[12152.730590] [AUD] htc_acoustic_7x30: enable_mic_bias called 0
<6>[12152.730957] [AUD] board_spade_audio: spade_mic_enable: 0, shift 1
<6>[12152.737792] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12152.738769] [HS_MGR] (remove_detect_work_func) Remove 3.5mm accessory (08-
10 16:40:55.707)
<6>[12153.231750] [AUD] htc_acoustic_7x30: enable_mic_bias called 1
<6>[12153.232421] [AUD] board_spade_audio: spade_mic_enable: 1, shift 1
<6>[12153.233673] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12153.445617] [HS_MICROP] (headset_microp_remote_adc) Remote ADC 874 (0x36A)
<6>[12151.716247] [HS_MGR] (insert_detect_work_func) HEADSET_MIC (08-10 16:40:54
.684)
<6>[12151.920501] [HS_MGR] (remove_detect_work_func) Waiting for HPIN stable
<6>[12152.730590] [AUD] htc_acoustic_7x30: enable_mic_bias called 0
<6>[12152.730957] [AUD] board_spade_audio: spade_mic_enable: 0, shift 1
<6>[12152.737792] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12152.738769] [HS_MGR] (remove_detect_work_func) Remove 3.5mm accessory (08-
10 16:40:55.707)
<6>[12153.231750] [AUD] htc_acoustic_7x30: enable_mic_bias called 1
<6>[12153.232421] [AUD] board_spade_audio: spade_mic_enable: 1, shift 1
<6>[12153.233673] [HS_MGR] (hs_notify_hpin_irq) HPIN IRQ
<6>[12153.445617] [HS_MICROP] (headset_microp_remote_adc) Remote ADC 874 (0x36A)
Thanks for support and help

[q] sensation xe wifi issue in cm9 and 10

there's a wifi issue on my device when i flash the cm9(9.0-9.1stable or RC or newest nigthly) or cm10 .:crying:
when turn on the wifi ,always show "turning wi-fi on..." .or auto turn off turn on in loop... can't search or add.
but there isn't problem in ruu rom or miui that they both use the android 4.03.
my device is:
htc sensation xe.
cid HTC__622(writed 1111111).
flashed the newlest euorpe 3.33 firmware with the ruu.
1.29 hboot.
unlock.
ship s-off.
before flash new rom i had wipe all cache.
pelase help me...

Well which kernel dud you flash on top?
Sent from my Sensation using Tapatalk 2

blahbl4hblah said:
Well which kernel dud you flash on top?
Sent from my Sensation using Tapatalk 2
Click to expand...
Click to collapse
i hadn't changed the kernel, all are the rom or ruu default

i tried a lot of kernel, and had the same problem on ICS, but it's working on CM10 (bruce's nightly)

mrc90 said:
i tried a lot of kernel, and had the same problem on ICS, but it's working on CM10 (bruce's nightly)
Click to expand...
Click to collapse
please tell me~~~which kernel can work in cm10?

this is logcat:
D/libloc ( 241): loc_eng_ioctl result: client = 0, ioctl_type = RPC_LOC_IOCTL_
INJECT_PREDICTED_ORBITS_DATA, RPC_LOC_API_SUCCESS
D/libloc ( 241): loc_eng_deferred_action_thread. waiting for events
D/RPC ( 241): 3100008c:327681 sending RPC reply (XID 16)
D/ThermalDaemon( 756): CPU[0] frequency limited to 1512000
D/ThermalDaemon( 756): Sensor 'tsens_tz_sensor0' - temperature 53248, threshold
level 0
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 120): Softap fwReload - Ok
D/CommandListener( 120): Setting iface cfg
D/NetworkManagementService( 241): rsp <213 00:90:4c:11:22:33 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
I/BATT_ALG( 130): batt_alg_overtemp_check:temp:377, isOver_temp:0
I/BATT_ALG( 130): vol=3960;curr=63;dis_curr=0;temp=377;id=2;level=82;chg_src=1;
chg_en=1;ov_chg=0;isOver_temp=0;timer=60;safety_count=120
D/dalvikvm( 595): GC_CONCURRENT freed 1556K, 79% free 2616K/12288K, paused 1ms+
2ms
W/BackupManagerService( 241): dataChanged but no participant pkg='com.android.p
roviders.settings' uid=1001
D/dalvikvm( 595): GC_CONCURRENT freed 1635K, 79% free 2700K/12288K, paused 2ms+
3ms
E/wpa_supplicant( 1352): Could not set interface wlan0 flags: Operation not perm
itted
E/wpa_supplicant( 1352): nl80211: Could not set interface 'wlan0' UP
E/wpa_supplicant( 1352): wlan0: Failed to initialize driver interface
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/dalvikvm( 595): GC_CONCURRENT freed 1682K, 78% free 2733K/12288K, paused 2ms+
2ms
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiStateMachine( 241): Failed to setup control channel, restart supplicant
D/SoftapController( 120): Softap fwReload - Ok
D/NetworkManagementService( 241): rsp <213 a8:26:d9:16:7b:9e 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/CommandListener( 120): Setting iface cfg
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
E/WifiHW ( 241): Unable to open connection to supplicant on "wlan0": No such f
ile or directory
D/dalvikvm( 241): GC_CONCURRENT freed 1691K, 60% free 4994K/12288K, paused 2ms+
4ms
D/dalvikvm( 595): GC_CONCURRENT freed 1636K, 78% free 2812K/12288K, paused 1ms+
3ms
E/WifiConfigStore( 241): Error parsing configurationjava.io.FileNotFoundExcepti
on: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory
)
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): Failed to set country code cn
E/wpa_supplicant( 1508): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
I/wpa_supplicant( 1508): wlan0: CTRL-EVENT-DRIVER-STATE HANGED
E/WifiStateMachine( 241): Failed to set frequency band 0
D/CommandListener( 120): Clearing all IP addresses on wlan0
D/ConnectivityService( 241): ConnectivityChange for WIFI: DISCONNECTED/DISCONNE
CTED
D/ConnectivityService( 241): Attempting to switch to mobile
D/ConnectivityService( 241): Attempting to switch to BLUETOOTH_TETHER
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
W/NetworkStats( 241): dropping UID delta from unknown iface: iface=wlan0 uid=0
set=DEFAULT tag=0x0 rxBytes=0 rxPackets=0 txBytes=140 txPackets=2 operations=0
D/ConnectivityService( 241): ConnectivityChange for WIFI: DISCONNECTED/DISCONNE
CTED
D/ConnectivityService( 241): Attempting to switch to mobile
D/ConnectivityService( 241): Attempting to switch to BLUETOOTH_TETHER
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/NetworkPolicy( 241): applying policy NetworkPolicy[NetworkTemplate: matchRule
=MOBILE_ALL, subscriberId=valid]: cycleDay=18, warningBytes=2147483648, limitByt
es=-1, lastSnooze=-1 to ifaces [rmnet0]
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:4.900000 seq:195
D/ThermalDaemon( 756): CPU[1] frequency limited to 1512000
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
I/wpa_supplicant( 1508): wlan0: CTRL-EVENT-TERMINATING
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.000000 seq:297 (Up time:350)
W/Netd ( 120): No subsystem found in netlink event
D/NetlinkEvent( 120): Unexpected netlink message. type=0x11
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:3.200000 seq:199
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 120): Softap fwReload - Ok
D/CommandListener( 120): Setting iface cfg
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
E/WifiHW ( 241): Unable to open connection to supplicant on "wlan0": No such f
ile or directory
D/NetworkManagementService( 241): rsp <213 00:90:4c:11:22:33 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.700000 seq:327 (Up time:495)
D/Tethering( 241): MasterInitialState.processMessage what=3
D/Tethering( 241): MasterInitialState.processMessage what=3
D/Tethering( 241): MasterInitialState.processMessage what=3
D/Tethering( 241): MasterInitialState.processMessage what=3
D/CMStats ( 523): Prompting user for opt-in.
D/CMStats ( 523): Prompting user for opt-in.
D/CMStats ( 523): Prompting user for opt-in.
D/CMStats ( 523): Prompting user for opt-in.
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:4.700000 seq:198
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.000000 seq:274 (Up time:274)
D/dalvikvm( 595): GC_CONCURRENT freed 1611K, 77% free 2916K/12288K, paused 1ms+
3ms
V/MediaScanner( 595): pruneDeadThumbnailFiles... android.database.sqlite.SQLite
[email protected]
V/MediaScanner( 595): /pruneDeadThumbnailFiles... android.database.sqlite.SQLit
[email protected]
I/power ( 241): *** set_screen_state 0
D/Sensors ( 241): handle : 4 en: 0, v010.0 - Try to resolve lock issue
D/Sensors ( 241): lock_status = 4
D/Sensors ( 241): Andy: MPLSensor::enable: lock1
W/MPL-sup ( 241): MLGetAKMComassStatus, gAKMCompassStatus = 0
D/Sensors ( 241): mEnabled = 0x0
D/Sensors ( 241): set_power_states++: enabled_sensors: 0 dmp_started: 1
D/Sensors ( 241): Before if statment: cs:0 rs:0 en_ped:0 da_ped:0 en_g:0 da_g:0
D/Sensors ( 241): Stopping DMP
I/ ( 241): mpu3050_suspend: suspending sensors to 0000
I/ ( 241): mpu3050_suspend: Will resume next to 0070
D/Sensors ( 241): inside if(s_use_timerirq)
D/Sensors ( 241): set_power_states--
D/Sensors ( 241): Andy: MPLSensor::enable: unlock1
D/Sensors ( 241): calling MLStoreCalibration()
D/Sensors ( 241): MPLSensor::enable--1
D/SurfaceFlinger( 123): About to give-up screen, flinger = 0xd81918
E/msm8660.gralloc( 123): In fb_enableHDMIOutput: externaltype = 0
I/SamplingRateChangeProcessor( 241): Increased sampling rate.
V/AudioHardwareMSM8660( 126): setParameters() screen_state=off
D/OpenGLRenderer( 435): Flushing caches (mode 0)
D/AccelerometerListener( 498): enable(false)
I/BATT_ALG( 130): batt_alg_overtemp_check:temp:377, isOver_temp:0
I/BATT_ALG( 130): vol=4017;curr=317;dis_curr=0;temp=377;id=2;level=82;chg_src=1
;chg_en=1;ov_chg=0;isOver_temp=0;timer=60;safety_count=180
I/power ( 241): *** set_screen_state 1
D/Sensors ( 241): handle : 4 en: 1, v010.0 - Try to resolve lock issue
D/Sensors ( 241): lock_status = 2
D/Sensors ( 241): Andy: MPLSensor::enable: lock1
D/Sensors ( 241): mEnabled = 0x10
D/Sensors ( 241): set_power_states++: enabled_sensors: 16 dmp_started: 0
D/Sensors ( 241): Before if statment: cs:0 rs:1 en_ped:0 da_ped:0 en_g:0 da_g:0
D/Sensors ( 241): STOP timerirq_1
I/WindowManager( 241): No lock screen!
D/Sensors ( 241): Starting DMP
I/ ( 241): mpu3050_resume: Resuming to 0070
D/Sensors ( 241): Exit: Starting DMP
D/Sensors ( 241): set_power_states--
D/Sensors ( 241): Andy: MPLSensor::enable: unlock1
D/Sensors ( 241): MPLSensor::enable--1
D/Sensors ( 241): (llu)G_Delay = 200
I/ ( 241): mpu3050_resume: Resuming to 0070
I/ ( 241): mpu3050_suspend: suspending sensors to 0070
I/ ( 241): mpu3050_suspend: Will resume next to 0070
I/MPL-ml ( 241): Actual ODR: 25 Hz
D/Sensors ( 241): (llu)G_Delay = 66
I/ ( 241): mpu3050_resume: Resuming to 0070
I/ ( 241): mpu3050_suspend: suspending sensors to 0070
I/ ( 241): mpu3050_suspend: Will resume next to 0070
I/MPL-ml ( 241): Actual ODR: 25 Hz
I/SamplingRateChangeProcessor( 241): Decreased sampling rate.
D/SurfaceFlinger( 123): Screen about to return, flinger = 0xd81918
E/msm8660.gralloc( 123): In fb_enableHDMIOutput: externaltype = 0
V/AudioHardwareMSM8660( 126): setParameters() screen_state=on
D/MP-Decision( 747): UP Nw:2.700000 Tw:180 rq:4.400000 seq:197
D/AccelerometerListener( 498): enable(false)
D/MP-Decision( 747): DOWN Ns:2.100000 Ts:270 rq:0.000000 seq:327 (Up time:441)
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
E/wpa_supplicant( 1526): Could not set interface wlan0 flags: Operation not perm
itted
E/wpa_supplicant( 1526): nl80211: Could not set interface 'wlan0' UP
E/wpa_supplicant( 1526): wlan0: Failed to initialize driver interface
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiHW ( 241): Supplicant not running, cannot connect
E/WifiStateMachine( 241): Failed to setup control channel, restart supplicant
D/SoftapController( 120): Softap fwReload - Ok
D/NetworkManagementService( 241): rsp <213 a8:26:d9:16:7b:9e 0.0.0.0 0 [down br
oadcast multicast]>
D/CommandListener( 120): Setting iface cfg
D/NetworkManagementService( 241): flags <[down broadcast multicast]>
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
E/WifiConfigStore( 241): Error parsing configurationjava.io.FileNotFoundExcepti
on: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory
)
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): set suspend optimizations failed!
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): Failed to set country code cn
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/WifiStateMachine( 241): Failed to set frequency band 0
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
W/wpa_supplicant( 1677): wlan0: Failed to initiate AP scan
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
I/wpa_supplicant( 1677): wlan0: CTRL-EVENT-DRIVER-STATE HANGED
W/wpa_supplicant( 1677): wlan0: Failed to initiate AP scan
E/wpa_supplicant( 1677): wpa_driver_nl80211_driver_cmd: failed to issue private
commands
D/CommandListener( 120): Clearing all IP addresses on wlan0
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
W/NetworkStats( 241): dropping UID delta from unknown iface: iface=wlan0 uid=0
set=DEFAULT tag=0x0 rxBytes=0 rxPackets=0 txBytes=384 txPackets=6 operations=0
I/wpa_supplicant( 1677): wlan0: CTRL-EVENT-TERMINATING
W/Netd ( 120): No subsystem found in netlink event
D/NetlinkEvent( 120): Unexpected netlink message. type=0x11
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
I/Jni WCMLinkStatus ( 512): ssid: Tmobile MAC: 00:00:00:00:00:00 bssid: 00:00
:00:00:00:00 ipaddr: 000.000.000.000 connected: 0
I/Jni WCMLinkStatus ( 512): addr: Ox0
E/Jni WCM_Init( 512): Not initialized
D/Tethering( 241): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 241): InitialState.processMessage what=4
D/Tethering( 241): sendTetherStateChangedBroadcast 0, 0, 0
D/SoftapController( 120): Softap fwReload - Ok
D/CommandListener( 120): Setting iface cfg
D/CommandListener( 120): Trying to bring down wlan0
D/CommandListener( 120): broadcast flag ignored
D/CommandListener( 120): multicast flag ignored
D/NetworkManagementService( 241): rsp <213 00:90:4c:11:22:33 0.0.0.0 0 [down br
oadcast multicast]>
D/NetworkManagementService( 241): flags <[down broadcast multicast]>

[Q] Ouya Controller issues (SOLVED, FIX IN THREAD)

Hello there,
I'm having troubles with the Ouya controller on my Nvidia Shield Tablet. I've tried to play games like Portal using it, but it just spins around by itself and it's simply unplayable due to that. I've tried applying the patch in the alternative gamepads thread, but still the issue appers and I'm not sure if it's related to Android L or not.
Any idea what to do? This is the logcat:
Code:
W/bt-btif ( 6096): btif_hh_upstreams_evt: BTA_HH_OPN_EVT: handle=0, status =6
D/HidService( 6096): Connection state B8:5A:F7:C4:6B:F0: 1->0
D/BluetoothAdapterService( 6096): getAdapterService() - returning com.android.bl
[email protected]
D/BluetoothAdapterProperties( 6096): CONNECTION_STATE_CHANGE: B8:5A:F7:C4:6B:F0:
1 -> 0
I/LocalBluetoothProfileManager( 4257): Failed to connect HID device
D/CachedBluetoothDevice( 4257): onProfileStateChanged: profile HID newProfileSta
te 0
W/ActivityManager( 657): getRecentTasks: caller 10036 does not hold GET_TASKS;
limiting output
E/bt-btif ( 6096): bte_scan_filt_param_cfg_evt, 1
V/BluetoothDiscoveryReceiver( 4257): Received: android.bluetooth.adapter.action.
DISCOVERY_FINISHED
W/bt-l2cap( 6096): L2CAP got conn_comp for unknown BD_ADDR
E/bt-btm ( 6096): tBTM_SEC_DEV:0x6fe92ebc rs_disc_pending=0
W/bt-btif ( 6096): info:x0
D/ ( 6096): remote version info [b8:5a:f7:c4:6b:f0]: 5, f, 2211
I/BTConnectionReceiver( 1378): onReceive(context, Intent { act=android.bluetooth
.device.action.ACL_CONNECTED flg=0x4000010 cmp=com.google.android.googlequicksea
rchbox/com.google.android.search.core.service.BluetoothConnectionReceiver (has e
xtras) }, [BluetoothDevice: address=B8:5A:F7:C4:6B:F0, alias=null, name=OUYA Gam
e Controller, majorDeviceClass=1280, deviceClass=1284]
I/BluetoothClassifier( 1378): Bluetooth Device Name: OUYA Game Controller
W/bt-btif ( 6096): new conn_srvc id:23, app_id:5
W/bt-btif ( 6096): btif_hh_upstreams_evt: BTA_HH_OPN_EVT: handle=0, status =0
W/bt-btif ( 6096): BTA_HH_OPEN_EVT: Found device...Getting dscp info for handle
... 0
E/bt-btif ( 6096): check_cod: remote_cod = 0x000504
E/bt-btif ( 6096): check_cod: remote_cod = 0x000504
D/BluetoothAdapterService( 6096): getAdapterService() - returning com.android.bl
[email protected]
D/HidService( 6096): Connection state B8:5A:F7:C4:6B:F0: 0->2
D/BluetoothAdapterService( 6096): getAdapterService() - returning com.android.bl
[email protected]
D/BluetoothAdapterService( 6096): getAdapterService() - returning com.android.bl
[email protected]
D/BluetoothAdapterState( 6096): CURRENT_STATE=ON, MESSAGE = USER_TURN_ON
I/BluetoothAdapterState( 6096): Bluetooth already ON, ignoring USER_TURN_ON
W/bt-btif ( 6096): btif_hh_upstreams_evt: name = OUYA Game Controller
W/bt-btif ( 6096): bta_hh_co_send_hid_info: fd = 61, name = [OUYA Game Controlle
r], dscp_len = 261
W/bt-btif ( 6096): bta_hh_co_send_hid_info: vendor_id = 0x2836, product_id = 0x0
001, version= 0x0003,ctry_code=0x00
D/BluetoothAdapterProperties( 6096): CONNECTION_STATE_CHANGE: B8:5A:F7:C4:6B:F0:
0 -> 2
E/EventHub( 657): could not get driver version for /dev/input/js0, Invalid argu
ment
W/bt-btif ( 6096): bta_hh_co_send_hid_info: fd = 61, dscp_len = 261, result = 0
W/bt-btif ( 6096): Device B8:5A:F7:C4:6B:F0 already added
W/bt-btif ( 6096): btif_hh_upstreams_evt: Device already added
D/CachedBluetoothDevice( 4257): onProfileStateChanged: profile HID newProfileSta
te 2
E/blakeinputnotify( 1303): locked_handle_input_inotify: /dev/input/event6 is not
blake
I/RSMouse ( 657): ============================================================
I/RSMouse ( 657): Controller "OUYA Game Controller" detected!
I/RSMouse ( 657): ============================================================
I/RSMouse ( 657): Controller Details:
I/RSMouse ( 657): Button 0 = 304 (130)
I/RSMouse ( 657): Button 1 = 305 (131)
I/RSMouse ( 657): Button 2 = 307 (133)
I/RSMouse ( 657): Button 3 = 308 (134)
I/RSMouse ( 657): Button 4 = 310 (136)
I/RSMouse ( 657): Button 5 = 311 (137)
I/RSMouse ( 657): Button 6 = 312 (138)
I/RSMouse ( 657): Button 7 = 313 (139)
I/RSMouse ( 657): Button 8 = 315 (13B)
I/RSMouse ( 657): Button 9 = 314 (13A)
I/RSMouse ( 657): Button 10 = 317 (13D)
I/RSMouse ( 657): Button 11 = 318 (13E)
I/RSMouse ( 657): Button 12 = 316 (13C)
I/RSMouse ( 657): Button 13 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 14 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 15 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 16 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 17 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 18 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 19 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 20 = -1 (FFFFFFFF)
I/RSMouse ( 657): Button 21 = 0 (000)
I/RSMouse ( 657): Button 22 = 0 (000)
I/RSMouse ( 657): Axis 0 = 0 (000) (0, 32768, 65535) Deadzone = 8190
I/RSMouse ( 657): Axis 1 = 1 (001) (0, 32768, 65535) Deadzone = 8190
I/RSMouse ( 657): Axis 2 = 3 (003) (0, 32768, 65535) Deadzone = 8190
I/RSMouse ( 657): Axis 3 = 4 (004) (0, 32768, 65535) Deadzone = 8190
I/RSMouse ( 657): Axis 4 = 2 (002) (0, 0, 65535) Deadzone = 8190
I/RSMouse ( 657): Axis 5 = 5 (005) (0, 0, 65535) Deadzone = 8190
I/RSMouse ( 657): Axis 6 = -1 (FFFFFFFF) (0, 0, 0) Deadzone = 0
I/RSMouse ( 657): Axis 7 = -1 (FFFFFFFF) (0, 0, 0) Deadzone = 0
I/RSMouse ( 657): ============================================================
I/RSMouse ( 657): Controller "OUYA Game Controller" loaded (id=12)
I/RSMouse ( 657): Vendor=2836 Product=0001
D/EventHub( 657): No input device configuration file found for device 'OUYA Gam
e Controller'.
E/KeyLayoutMap( 657): /system/usr/keylayout/Vendor_2836_Product_0001.kl:41: Exp
ected key flag label, got 'ALT'.
W/EventHub( 657): Unable to disable kernel key repeat for /dev/input/event6: Fu
nction not implemented
I/EventHub( 657): New device: id=12, fd=190, path='/dev/input/event6', name='OU
YA Game Controller', classes=0x80000149, configuration='', keyLayout='/system/us
r/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', bui
ltinKeyboard=false, wakeMechanism=EPOLLWAKEUP, usingClockIoctl=true
D/InputReader( 657): Mouse Mode = Touch
I/RSMouse ( 657): setVirtualMouseState: enable
I/InputReader( 657): Device added: id=12, name='OUYA Game Controller', sources=
0x01001513
I/InputReader( 657): Setting mTouchBlackoutEnabled from property to 1
I/InputReader( 657): Setting mExtendBlackoutWhilePointersDown from property to
1
I/InputReader( 657): Setting mIIRLowPassFactor from property to 1.000000
I/InputReader( 657): Setting mPressureEBC from property to 0.900000
I/InputReader( 657): Setting mToolSwitchTime from property to 400 ms
I/InputReader( 657): Setting mToolSwitchRange from property to 200
I/InputReader( 657): Setting mEraserLatchRange from property to 10
I/InputReader( 657): Setting mEraserDelayTime from property to 250 ms
I/InputReader( 657): Setting mPinchToZoomTime from property to 1000 ms
I/InputReader( 657): Setting mPinchToZoomRange from property to 1100
I/InputReader( 657): Setting mPinchToZoomRectangleX from property to 800
I/InputReader( 657): Setting mPinchToZoomRectangleY from property to 1400
I/InputReader( 657): Setting mPinchToZoomRectangleCenterX from property to 600
I/InputReader( 657): Setting mPinchToZoomRectangleCenterY from property to 960
I/InputReader( 657): Setting mEdgeRemapMarginLeft from property to 10
I/InputReader( 657): Setting mEdgeRemapMarginTop from property to 5
I/InputReader( 657): Setting mEdgeRemapMarginRight from property to 15
I/InputReader( 657): Setting mEdgeRemapMarginBottom from property to 5
W/EventHub( 657): An input event from /dev/input/event6 has a timestamp that ap
pears to have been generated using the wrong clock source (expected CLOCK_MONOTO
NIC): event time 1420482646686335000, current time 1510801470576, call time 1510
801461159. Using current time instead.
W/EventHub( 657): An input event from /dev/input/event6 has a timestamp that ap
pears to have been generated using the wrong clock source (expected CLOCK_MONOTO
NIC): event time 1420482646686335000, current time 1510801530242, call time 1510
801461159. Using current time instead.
W/EventHub( 657): An input event from /dev/input/event6 has a timestamp that ap
pears to have been generated using the wrong clock source (expected CLOCK_MONOTO
NIC): event time 1420482646686335000, current time 1510801572826, call time 1510
801461159. Using current time instead.
D/Index ( 4257): Indexing locale 'en_GB' took 39 millis
D/blake_utils( 1303): Non Blake HIDRAW device: OUYA Game Controller
W/ActivityManager( 657): getRecentTasks: caller 10036 does not hold GET_TASKS;
limiting output
W/ActivityManager( 657): getRecentTasks: caller 10036 does not hold GET_TASKS;
limiting output
D/btif_config_util( 6096): btif_config_save_file(L188): in file name:/data/misc/
bluedroid/bt_config.new
W/ActivityManager( 657): getRecentTasks: caller 10036 does not hold GET_TASKS;
limiting output
D/HeadsetStateMachine( 6096): currentState is Disconnected
W/ActivityManager( 657): getRecentTasks: caller 10036 does not hold GET_TASKS;
limiting output

I've figured out the issue with the OUYA controller on Lollipop and it's all related to line 41 in the .kl file, specifically HOME ALT. I've removed the HOME ALT and replace it with BUTTON_START instead and it seem to work a lot better now, and gamepad is being detected properly:
https://drive.google.com/file/d/0B86...ew?usp=sharing
So if you're having issues with the OUYA gamepad on Nvidia SHield tablet, use that patch as it seem to fix the issues and it works really well (better than Dualshock 3 for an example).

Could you please reupload the patch? Having alot of trouble getting the OUYA keymapping
EDIT: Figured it out, took the Vendor_2836_Product_0001.kl changed Line 41 to BUTTON_START !
Thanks for pointing me in the right direction!