Hello,
So I have got a rooted Z3 with custom rom and SupeSU installed. I wanted to install MagiskSU so I booted into recovery and flashed the MagiskSU zip and now the phone won't turn on at all. I can't boot into recovery (by holding the power and volume down button) and I can't get anything to come up on the screen at all. No recharge symbol when plugged into charger either. Although do get the red LED blinking when charging. When I try to power on the phone I get the normal quick vibrate but that's it. Anyone have any suggestions? Thanks.
Fastboot Mode (vol+down) and flashtools stock rom Magisk only install in UB
kusanagi666 said:
Fastboot Mode (vol+down) and flashtools stock rom Magisk only install in UB
Click to expand...
Click to collapse
Thanks, but will I lose everything on my phone if I do that?
kaotik123 said:
Thanks, but will I lose everything on my phone if I do that?
Click to expand...
Click to collapse
That's right.. This format internal data (sorry by that)
Related
I rebooted my OnePlus One yesterday and found myself in a weird situation. The phone would go to the initial OnePlus logo then after, a smal android logo with a red warning sign appears for a split second, and I boot into the CM stock recovery. I can't turn it on or enter fastboot, nor can I turn on ADB Debugging on my phone and would really appreciate help as I do not want this phone to be gone. Pretty scared guys, help would be much appreciated!
I've never seen this problem before.
I supose you are bootloader unlocked, rooted and have costum recovery, right?
For fastboot, if it does not work normally, try: up button + power with the phone connected to the PC; if it does not work, try the same button combo + plug the phone to the pc while you are holding down the buttons.
badjoras said:
I've never seen this problem before.
I supose you are bootloader unlocked, rooted and have costum recovery, right?
For fastboot, if it does not work normally, try: up button + power with the phone connected to the PC; if it does not work, try the same button combo + plug the phone to the pc while you are holding down the buttons.
Click to expand...
Click to collapse
Thanks for the prompt response. I think you should also know that I attempted to put a custom recovery on my OPO, but after saying that it worked, I only loaded into the CM Stock Recovery. I do not, have my phone with me at the moment as I did not think it would be necessary to bring to school with me, but I will attempt everything you have said. Thanks for the help so far!
badjoras said:
I've never seen this problem before.
I supose you are bootloader unlocked, rooted and have costum recovery, right?
For fastboot, if it does not work normally, try: up button + power with the phone connected to the PC; if it does not work, try the same button combo + plug the phone to the pc while you are holding down the buttons.
Click to expand...
Click to collapse
I attempted both ways but nothing happens as I press the buttons. It will only boot in the CM Simple Recovery.
NizzleFish98 said:
I attempted both ways but nothing happens as I press the buttons. It will only boot in the CM Simple Recovery.
Click to expand...
Click to collapse
I believe you messed it up for good, since you: can't get into fastboot; have no recovery; have no backups... If you could get fastboot to go you would only need to flash twrp and then sideload a rom =/
Does the stock recovery let you sideload?
badjoras said:
I believe you messed it up for good, since you: can't get into fastboot; have no recovery; have no backups... If you could get fastboot to go you would only need to flash twrp and then sideload a rom =/
Does the stock recovery let you sideload?
Click to expand...
Click to collapse
Yes. It does.
Download the stock image. I'm sure it will be there somewhere in the forums.
Then go to recovery and do the following:
Select 'apply update'. Then you either have the option to apply update from Internal Storage or from adb.
Select adb and enter: adb sideload update_filename.zip
badjoras said:
I believe you messed it up for good, since you: can't get into fastboot; have no recovery; have no backups... If you could get fastboot to go you would only need to flash twrp and then sideload a rom =/
Does the stock recovery let you sideload?
Click to expand...
Click to collapse
assuming it's the stock android recovery, i'm pretty sure it allows for sideloading.
Def sounds like something got flashed to the wrong parition though
I unlocked the bootloader using the instructions from the Sony developer site. It worked, and then I flashed the recovery software using the flash tool, Emma, but when I press the buttons to boot in recovery mode, instead of this, my OS resets, like factory reset, or it doesn't boot, just vibrates. I don't know what to do. I want to try cyanogenmod and I want to flash it, but without recovery I can't, and it's possible to find on the Sony site the stock rom in case I want to come back to the stock OS? And something else. After the reset, the OS looks different. I have features that I didn't have before
thrall1980 said:
I unlocked the bootloader using the instructions from the Sony developer site. It worked, and then I flashed the recovery software using the flash tool, Emma, but when I press the buttons to boot in recovery mode, instead of this, my OS resets, like factory reset, or it doesn't boot, just vibrates. I don't know what to do. I want to try cyanogenmod and I want to flash it, but without recovery I can't, and it's possible to find on the Sony site the stock rom in case I want to come back to the stock OS? And something else. After the reset, the OS looks different. I have features that I didn't have before
Click to expand...
Click to collapse
You have to upgrade your bootloader via Emma and flash the recovery.img via fastboot.
Thank you. I flashed a TWRP recovery and it worked.
cannot boot into twrp recovery
Hi I have rooted my xperia M2 via eagleroot. Android version 5.1.1. Installed twrp recovery. The current firmware version 18.6.A.0182.
I am unable to boot into the recovery. how do i check if the recovery is installed?any solutions?
ismailf007 said:
Hi I have rooted my xperia M2 via eagleroot. Android version 5.1.1. Installed twrp recovery. The current firmware version 18.6.A.0182.
I am unable to boot into the recovery. how do i check if the recovery is installed?any solutions?
Click to expand...
Click to collapse
When you boot up your phone, do you have the notification led and the illumination bar blinking ?
tromine said:
When you boot up your phone, do you have the notification led and the illumination bar blinking ?
Click to expand...
Click to collapse
No notification led and illumination bar blinking after rebooting device. I tried combination of power button + volume up or power button + volume down. Used Titanium backup to reboot into recovery. Ran adb command to reboot into recovery all failed.
ismailf007 said:
No notification led and illumination bar blinking after rebooting device. I tried combination of power button + volume up or power button + volume down. Used Titanium backup to reboot into recovery. Ran adb command to reboot into recovery all failed.
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/xperia-m2/development/d2303-philz-touch-recovery-6-t3047492
tromine said:
Try this http://forum.xda-developers.com/xperia-m2/development/d2303-philz-touch-recovery-6-t3047492
Click to expand...
Click to collapse
Hi
installed the multiple recovery for xperia m2 and it worked well. Illuminating blue light comes up during boot. Then i hold the volume up button and it turns green which allows me to boot into recovery
Good day I have a problem with my idol 3 5.5 a few days ago I turned off and it took a long time to turn it on again, I did a formatting and it continued the same, it only vibrates when trying to turn it on and if I connect it to the charger or to the pc it turns on the LED but there not passed . I have tried to install several roms but when I finish installing it I get the reboot, I reboot and the cell phone goes off again. It is rare that the cell phone enters recovery mode. It comes with factory recovery.
If someone knows a solution or a rom that works very well that is to install directly from the recovery would thank you.
Sorry for the English but I am Colombian and use the translator xD
Factory recovery? How are you able to install those roms?
Huskied said:
Factory recovery? How are you able to install those roms?
Click to expand...
Click to collapse
yes, recovery alcatel xDDD
I only give you the power button and volume + and enter recovery mode I give you install I select the folder where the ROM is installed I reboot it and the cell phone stays frozen.
I do not know if it's the rom euphoria that does not work or if in the end the cell phone is no longer useful, or if you have to have another recovery.
JaviitoTaker said:
yes, recovery alcatel xDDD
I only give you the power button and volume + and enter recovery mode I give you install I select the folder where the ROM is installed I reboot it and the cell phone stays frozen.
I do not know if it's the rom euphoria that does not work or if in the end the cell phone is no longer useful, or if you have to have another recovery.
Click to expand...
Click to collapse
Last probable cause, Not having TWRP. You really need that on top of that, Unlocked bootloader.
Huskied said:
Last probable cause, Not having TWRP. You really need that on top of that, Unlocked bootloader.
Click to expand...
Click to collapse
I need to have the TWRP recovery ???
Or just just unlock the boot loader?
And most importantly how do I unlock the boot loader?
JaviitoTaker said:
I need to have the TWRP recovery ???
Or just just unlock the boot loader?
And most importantly how do I unlock the boot loader?
Click to expand...
Click to collapse
https://forum.xda-developers.com/idol-3/development/tool-tools-idol-3-5-5-4-7-t3441781
kal250 said:
https://forum.xda-developers.com/idol-3/development/tool-tools-idol-3-5-5-4-7-t3441781
Click to expand...
Click to collapse
And how does that work?
I have to install as if it were a ROM?
* I already saw the functions but I did not understand how to put it
JaviitoTaker said:
And how does that work?
I have to install as if it were a ROM?
* I already saw the functions but I did not understand how to put it
Click to expand...
Click to collapse
That's to Unlock Bootloader and flash TWRP. Then install ROM.
I flashed cwm recovery over TWRP from this link below . now phone is not power on?
http://androidhost.org/hUhuh
Any suggestion. :crying:
sanrajbhar said:
I flashed cwm recovery over TWRP from this link below . now phone is not power on?
http://androidhost.org/hUhuh
Any suggestion. :crying:
Click to expand...
Click to collapse
Press volume down while powering on. Does the bootloader appear? If it does, use
Code:
fastboot flash recovery NAMEOFTWRPIMAGE.img
Code:
fastboot boot NAMEOFTWRPIMAGE.img
Backup your data, reboot to bootloader and flash stock ROM before proceeding to flash a custom ROM (or try flashing the custom one directly).
xMotoDA said:
Press volume down while powering on. Does the bootloader appear? If it does, use
Code:
fastboot flash recovery NAMEOFTWRPIMAGE.img
Code:
fastboot boot NAMEOFTWRPIMAGE.img
Backup your data, reboot to bootloader and flash stock ROM before proceeding to flash a custom ROM (or try flashing the custom one directly).
Click to expand...
Click to collapse
I tried volume down with power button but it does not working, no bootloader or sceen on. can I assume now nothing can be done.
My phone was rooted and installed with AOSP rom .
sanrajbhar said:
I tried volume down with power button but it does not working, no bootloader or sceen on. can I assume now nothing can be done.
My phone was rooted and installed with AOSP rom .
Click to expand...
Click to collapse
I have a similar issue, as my phone also cannot turn on and I have TWRP recovery.
I had rooted my phone with SuperSU and unlocked the bootloader via motorola's tool. But then due to SafetyNet, apps such as Snapchat wouldn't work (cant log in), and I couldn't download Netflix (totally a huge issue).
So I decided to try switching to Magisk instead, as I heard that uses systemless root that doesnt trip Safety Net. While uninstalling SuperSU (using the built in feature for full removal), I was able to uninstall SuperSU and unroot my phone, but was not able to restore the stock boot image in the process. It was at this point I made a NANdroid backup in case I stuffed anything up.
Because of this, I was unable to flash Magisk via the TWRP recovery, so I downloaded a previous version of the firmware from January to flash back to from here. After flashing this and also wiping the user data, my phone booted up fine and worked, and appeared to be in normal condition.
However, then I elected to download and install the firmware update. This all went well, and was installing, until just at the end of the process, when the phone turned off. It had over 60% battery at the time.
At this point in time I'm still unable to get it to boot up, even into recovery or fastboot mode, so I cant really do anything, or restore my NANdroid backup.
If I plug it into my laptop, and hold the power + volume button down for a period of time, I can hear the USB connected tone (Windows 10), which then switches to a disconnected tone and a "USB device malfunctioned" error message pops up.
I tried leaving it unplugged all of last night just in case it was stuck in a boot loop or something so the screen couldn't display anything, in order to flatten the battery, but obviously I couldn't tell any difference. I'm currently now trying to have it plugged into power for an extended period of time just in case it is actually just flat. The current condition is just a black screen as if there was no power at all, with no lights or anything, regardless of a charger being connected, with the buttons not doing anything (I've attempted holding down the power and volume down buttons together for at least 2 minutes to no effect)
Any help would be greatly appreciated.
My specs: Moto G Turbo (2015), model XT1557, running Android 6.0.1. Can't remember exactly, but it previously had the latest firmware available before I tried flashing the January firmware.
Hello Guys,
I have a huge Problem! I installed Twrp and CosmosOS.. after that I installed Magisk. I clicked long on the reboot button and clicked reboot recovery. It rebooted but now I am stuck in the TWRP loadingscreen and can't do anything.. I tryed to adb reboot bootloader, came back to the loadingscreen.. I also tryed to click all the combination to get somewhere but nothing worked.. Please someone help me... Im lost..
Worse case you could just flash stock images and start over. Could first try flashing twrp recovery image
ThePrinoob said:
Hello Guys,
I have a huge Problem! I installed Twrp and CosmosOS.. after that I installed Magisk. I clicked long on the reboot button and clicked reboot recovery. It rebooted but now I am stuck in the TWRP loadingscreen and can't do anything.. I tryed to adb reboot bootloader, came back to the loadingscreen.. I also tryed to click all the combination to get somewhere but nothing worked.. Please someone help me... Im lost..
Click to expand...
Click to collapse
What's your phone model (variant) ? Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
What's your phone model (variant) ? Can you still access to the bootloader or the erecovery?
Click to expand...
Click to collapse
I have a BKL-L09.
If I drain the battery to 0% I can acces CosmicOS now, but if I do a reboot it reboots back to this screen.. I can acces erecovery, but not the BL..
Is there an bootloader button? Like Power + Volume up, for recovery?
Try open cmd
Adb shell halt, after that pull USB from device.
This works for me to shut down the device.
Now connect phone with USB and hold vol -
Your phone starts in bootloader
Powered by View 10
I had the same Problem! I used the buttoncombination vol- & power - when the Phone boots, plug your USB cable that is plugged into your Computer in the Phone and you will boot into fastboot mode. Flash stock Images available via Firmware Finder, extract SYSTEM.IMG from UPDATE.APP. you will lose all data from your internal sd :/
Thanks for you're help