Database Info

I337UCUFNB1_100%_Stock_Rooted_ROM & I337_MK2toNB1_KeepRoot_OTA.zip

The following is not a root method in the "traditional" sense, e.g. Saferoot, Kingo. This is a workaround to our inability to root KitKat 4.4.2. However the end result is a Fully Functioning, 100% Stock, Rooted, NB1 Device. (See Post# 2 for "KeepRoot"OTA.zip Method). Proceed at Your Own Risk! (Thanks to @ted77usa @rebel1699 @Maribou @dave5777 @dolph8886 @Surge1223 @jeboo for discoveriing it was possible to downgrade from MK2 to NB1. Special thanks to @rebel1699 for figuring out how to flash a 4.4 SS Custom ROM on our device. Without them this workaround would not be possible).
**Closing my thread now that a direct rooting method is available. Congrats to Everyone mentioned above for your accomplishments while we waited for this!** : http://forum.xda-developers.com/showthread.php?t=2783157
**Note**: The process below has been proven to work without exception when the instructions are followed to the letter. Should you run into trouble please consider re-reviewing the instructions to identify your error before requesting assistance. Thank you.
Get the latest I337 firmware here: I337UCUFNC1
Donations Welcome!
Here it is: I337UCUFNB1_100%_Stock_Rooted_ROM
And here: I337UCUFNB1_100%_Stock_Rooted_ROMwBL (This version contains the NB1 bootloader. MK2 bootloader users will not be able to go back to factory stock MK2 after flashing).
1. Place the I337UCUFNB1_100%_Stock_Rooted_ROM in the root of your ext sdcard.
*2. Download the I337_Downgrade_to_MK2 file, extract the .tar and flash in PDA slot in Odin(AP in Odin v3.09+) to obtain semi-functioning(no-wifi) MK2.
3. Use your favorite root method to root MK2, e.g. Saferoot, Kingo Root App, then install the latest Safestrap-JFLTE-3.72-kk-B01.apk.
4. Boot into Safestrap recovery, perform an "Advanced Wipe", and wipe everything except ext sdcard.
5. Flash the ROM zip in the "Stock Slot." Once complete press "Home," then reboot into "Download Mode".
6. Flash the I337_NB1_Stock_Kernel in PDA slot in Odin(AP in Odin v3.09+).
*MK2 users can skip Step 2.
Once complete the phone will apply an update to cache, then reboot and pause on the white AT&T splash screen for about 1-2 minutes before completely rebooting. Done!
- MK2 users can use Safestrap's Backup/Restore function to backup and restore User Data prior to and after flashing the ROM. Make sure and thank @loganfarrell for discovering this very useful feature.
- In general, to flash a different 4.4.2 Safestrap Custom ROM after flashing this ROM reboot into Safestrap recovery, perform an advanced wipe, and wipe everything but ext sdcard. Then flash the new ROM in the "Stock Slot" and reboot (Refer to the other ROM's dedicated thread for any additional requirements or for assistance. Please limit the discussion in this thread to the 100%_Stock_Rooted_ROM and the KeepRoot OTA zip).
- To go back to factory stock, un-rooted NB1 flash the NB1 4.4.2 Stock Odin .tar in the PDA slot in Odin(AP in Odin v3.09+).
- Those that never took the MK2 to NB1 update can return to factory stock MK2 by flashing the MK2 All-in-One Full Odin .tar in PDA slot in Odin(AP in Odin v3.09+).
Known Issue: MK2 bootloader users will experience a lockscreen settings issue. The issue can be resolved by flashing the FMLD_Bootloader in Odin's PDA slot(AP in Odin v3.09+). You will still be able to revert back to factory stock MK2. Caution!: NB1 & NC1 bootloader users should not flash this file as it may hardbrick your phone.
I337UCUFNB1_100%_Stock_Rooted_TetherAddOn
Instructions:
1. After flashing and booting into I337UCUFNB1_100%_Stock_Rooted_ROM,
2. Place the AddOn in ext sdcard.
3. Reboot into Safestrap recovery and flash the AddOn in Stock Slot (Do Not Wipe Prior to Flashing)
4. Reboot. Done!

I337UCUFNB1_MK2-to-NB1_KeepRoot_OTA.zip Method
This alternative "Keep Root" method uses a modified version of the official MK2 to NB1 OTA Update.zip to upgrade while maintaining User Data and Root Access! The file is flashed in Safestrap and the end result is a 100% Stock, Rooted, NB1 Device. Proceed at your own risk! Thanks to @jeboo for giving me the idea to develop this method!
**Prerequisite** This method requires that your MK2 system is 100% stock except for root and Safestrap. The update will fail if any MK2 system files have been modified or deleted, e.g. thru Xposed, etc. You must first restore the stock files or reflash back to stock MK2 and re-root.
Here it is: I337_MK2toNB1_KeepRoot_OTA.zip
And here: I337_MK2toNB1_KeepRoot_OTAwBL.zip (This version contains the NB1 bootloader. MK2 bootloader users will not be able to go back to factory stock MK2 after flashing).
1. Place the I337UCUFNB1_MK2toNB1_KeepRoot_OTA.zip in the root of your ext sdcard.
2. Follow steps 2 - 3 from Post# 1 to downgrade to MK2, root, and install the latest Safestrap-JFLTE-3.72-kk-B01.apk .
3. Boot into Safestrap recovery but Do Not Wipe!.
4. Flash the I337UCUFNB1_MK2toNB1_KeepRoot_OTA.zip in the "Stock Slot" and once complete press "Home" and reboot into "Download Mode".
5. Last, flash the I337_NB1_Stock_Kernel in Odin's PDA slot(AP in Odin v3.09+).
Once complete the phone will reboot to the white AT&T splash screen then "optimize apps" before completely rebooting. Done!
Known Issue: Safestrap.apk will force close after updating to 4.4.2 using this method, however Safestrap recovery will continue to function. Optional: to manually uninstall Safestrap recovery use Es File Explorer to delete system/etc/safestrap and system/bin/e2fsck then rename system/bin/e2fsck.bin to e2fsck (save these files if you wish to manually reinstall Safestrap at a later time).
I337UCUFNB1_100%_Stock_Rooted_TetherAddOn
Instructions:
1. After flashing and booting into I337UCUFNB1_100%_Stock_Rooted_ROM,
2. Place the AddOn in ext sdcard.
3. Reboot into Safestrap recovery and flash the AddOn in Stock Slot (Do Not Wipe Prior to Flashing)
4. Reboot. Done!

Nice bro. Easy to follow and all. Hopefully this will alleviate some of the issues people are having.
:good:

muniz_ri said:
Reserved
Click to expand...
Click to collapse
@muniz_ri ur saying here to put the file in the PDA slot correct which mean using odin3 v 1.85 correct. If so that might be my problem in the past with this down grade method I used odin3 v 3.09 and flashed the pit and AP files from @ted77usa downgrade method. Do you think that could be my problem. And again thank you so much for all your help lately I know it has to be annoying but thank you so much for walking me through so much stuff because of you I feel very confident in doing this so thank you for all your help. Also thanks you to all the other dev's that I have been such a pain in the but to hahah

GS4privileged said:
@muniz_ri ur saying here to put the file in the PDA slot correct which mean using odin3 v 1.85 correct. If so that might be my problem in the past with this down grade method I used odin3 v 3.09 and flashed the pit and AP files from @ted77usa downgrade method. Do you think that could be my problem. And again thank you so much for all your help lately I know it has to be annoying but thank you so much for walking me through so much stuff because of you I feel very confident in doing this so thank you for all your help. Also thanks you to all the other dev's that I have been such a pain in the but to hahah
Click to expand...
Click to collapse
No problem. I believe Odin changed the name of the PDA slot to AP in version 3.09. I use version 3.08 but whichever version you use you don't need to add the pit file. Just follow the above process to the letter and you should be fine. Good luck.

muniz_ri said:
No problem. I believe Odin changed the name of the PDA slot to AP in version 3.09. I use version 3.08 but whichever version you use you don't need to add the pit file. Just follow the above process to the letter and you should be fine. Good luck.
Click to expand...
Click to collapse
does wireless work after doing this procedure?

muniz_ri said:
No problem. I believe Odin changed the name of the PDA slot to AP in version 3.09. I use version 3.08 but whichever version you use you don't need to add the pit file. Just follow the above process to the letter and you should be fine. Good luck.
Click to expand...
Click to collapse
OK I will try again once I get home from work but I use 3.09 and 1.85 maybe I'll try it using 1.85.

bigcid10 said:
does wireless work after doing this procedure?
Click to expand...
Click to collapse
Yes, I will update the OP and make that clear. Thanks

thank you soo much for these steps. one question, I am already on mk2 so i dont need to downgrade. do i still follow the same instructions... and is there a specific folder in the sd external whr the file should b placed?

tmaddison93 said:
thank you soo much for these steps. one question, I am already on mk2 so i dont need to downgrade. do i still follow the same instructions... and is there a specific folder in the sd external whr the file should b placed?
Click to expand...
Click to collapse
You can skip step 2. Also, place the rom in the root of your ext sdcard. OP updated. Thanks

ok ok. i think i messed up,,, I installed safe root instead of safe strap is it the same? should i unnstall? and how do i boot into it.
ok got it .. figured it out.

You need safe root to install safestrap. After you use saferoot, install the safestrap apk and launch the safestrap app.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Maribou said:
You need safe root to install safestrap. After you use saferoot, install the safestrap apk and launch the safestrap app.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok im getting somewhere, i have downloaded everything ! yes!! now it say select zip file.. however i cant find the file.. i didnt wipe my external.. the file is I337...

tmaddison93 said:
ok im getting somewhere, i have downloaded everything ! yes!! now it say select zip file.. however i cant find the file.. i didnt wipe my external.. the file is I337...
Click to expand...
Click to collapse
Keep pressing "up one level" in safestrap until you see "extsdcard."

muniz_ri said:
Keep pressing "up one level" in safestrap until you see "extsdcard."
Click to expand...
Click to collapse
i am there and the choices are android.secure, android, books,dcim,lost.dir, twrp

tmaddison93 said:
i am there and the choices are android.secure, android, books,dcim,lost.dir, twrp
Click to expand...
Click to collapse
Scroll to the very bottom and if you don't see it there then it's not in your ex sdcard.

muniz_ri said:
Scroll to the very bottom and if you don't see it there then it's not in your ex sdcard.
Click to expand...
Click to collapse
dammn.. so how do i get it there. i put it in the root folder of the sd slot... and i saw it on my phone when it was turned on normally.

tmaddison93 said:
dammn.. so how do i get it there. i put it in the root folder of the sd slot... and i saw it on my phone when it was turned on normally.
Click to expand...
Click to collapse
Keep pressing "up one level" until you see "sd card." You likely placed it in there.

muniz_ri said:
Keep pressing "up one level" until you see "sd card." You likely placed it in there.
Click to expand...
Click to collapse
im going to have to look at every file... to make it clear i should be in safe strap after i wipe. i hit install correct? ok second if i cant find the file how do i add it bac. can i reboot from safestrap or i do i have to do a recovery

Yes double press on the file once you find it. Then hit install.

[How-To] Update to I337_OK2 - 5.0.1 and KeepRoot

**You can begin the following process from any 4.4.x Build/ROM or higher but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW.
**Caution!** The following process is only for the AT&T I337 S4 Variant. Use on any other device may result in a hardbrick!
Downloads:
- I337_OK2_Stock_Rooted_ROM.zip
- I337_OK2_Stock_Rooted_Deodexed_ROM.zip
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OK2_Bootloader.tar.md5 using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Optional:
- I337_OK2_TetherAddOn.zip
- I337_OC3_Batch_Debloater (Customizable)
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
5. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2
Credits:
@Chainfire

Awesome
Amazing! you done it again @muniz_ri downloaded and installed perfectly!

Is there a way to root without having to flash back to nj4? I'm already on OC3 and a non-odin method like on nj4 would be pretty nice.

muniz_ri said:
Instructions:
1. Extract the I337_OC3_Stock_Rooted_Backup from the .rar archive and place it into the following folder: ext-sdcard/TWRP/BACKUPS/xxxxxx, fyi...the name of this folder will vary. If the folder does not already exist you must first use safestrap to create a nandroid backup and Safestrap will create the folder for you.
2. From Safestrap recovery press "Wipe" then "Advanced Wipe" and wipe everything but your ext-sdcard.
3. From the main menu press "Restore," then select and restore the I337_OC3_Stock_Rooted_Backup.
4. Once complete from the main menu press "Reboot," then reboot into "Download" mode.
5. Last, flash the I337_OC3_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+) and reboot. Done!
Upon reboot the Safestrap Recovery splash screen will flash a few times before pausing on the AT&T splash screen for about 2 minutes before completely rebooting. **You will no longer be able to access Safestrap Recovery from 5.0 (see notes below for workaround)**
Optional Tethering AddOn:
1. Place the I337_OC3_TetherAddOn onto your ext-sdcard.
2. From Safestrap recovery press "Install," then select and install the I337_OC3_TetherAddOn(Do not wipe prior to flashing!).
3. Reboot. Done!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. This process will update your Modem, Non-hlos, System, Kernel, Stock Recovery, and Bootloader to OC3 (BusyBox is also pre-installed).
3. Safestrap will no longer function after updating to 5.0. However you can access Safestrap recovery by flashing back the I337_NJ4_Stock_Kernel (reflash the I337_OC3_Stock_Kernel once you are done using Safestrap).
4. The most common cause of an Odin flash failure is a bad usb port or cable. Please check before reporting a failure!
Credits:
@Apoplectic1 - for capturing the OTA update.
Click to expand...
Click to collapse
Muniz you are great you are genius, but i'm lol nothing to do with this kinda great work so, please a little explain to me
I am a crazy fan of you and of course you great work
i have an AT&T i337UCUFNJ4 unrooted (may be because rootchecker.apk shows root access is not properly installed on this device) so it somehow means that i am on stock firmware but unfortunatly i live in a country where ATT has no existance so, no AT&T SIM card or so, now i want to update my phone to LOOOOOOOOLIpop
Please tell me if i have no roooted phone and no working safestraf in it what can i do please,
i

how do i update if i am on unrooted NJ4?

talvigi said:
Muniz you are great you are genius, but i'm lol nothing to do with this kinda great work so, please a little explain to me
I am a crazy fan of you and of course you great work
i have an AT&T i337UCUFNJ4 unrooted (may be because rootchecker.apk shows root access is not properly installed on this device) so it somehow means that i am on stock firmware but unfortunatly i live in a country where ATT has no existance so, no AT&T SIM card or so, now i want to update my phone to LOOOOOOOOLIpop
Please tell me if i have no roooted phone and no working safestraf in it what can i do please,
i
Click to expand...
Click to collapse
onisleeve said:
how do i update if i am on unrooted NJ4?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...to-root-i337ucufnj4-4-4-4-11-13-2014-t2939553

Noob Alert!
Elated to hear about that the Lollipop update for ATT S4 is out.
Newbie here ! I own an ATT S4 running Official jelly bean, Its rooted & unlocked so that I can use here in India. Can anyone help me how do I got about with the upgrade with losing the unlock?
Do I need a custom ROM like TWRP ?
or any links to guides to how to go about it.

muniz_ri said:
http://forum.xda-developers.com/gal...to-root-i337ucufnj4-4-4-4-11-13-2014-t2939553
Click to expand...
Click to collapse
dude, thanks for your reply,
i guess i was not clear, i am unrooted on NJ4 and need to remain unrooted to 5.0
I use GOOD for Enterprise for work email hence the need to remain unrooted.

onisleeve said:
dude, thanks for your reply,
i guess i was not clear, i am unrooted on NJ4 and need to remain unrooted to 5.0
I use GOOD for Enterprise for work email hence the need to remain unrooted.
Click to expand...
Click to collapse
Here After We Can Update Our AT&T Samsung Galaxy S4 Software Update Via .. ADB Sideload
We Can Use This Method To Update Our Phone :
1) Install Samsung USB Drivers
2) Start Samsung Recovery [ Volume Up + Home + Power ]
3) Select " Apply Update From The ADB "
4) On PC : Install Minimal ADB and Fastboot Software ... Then Put The Update File (ZIP) On Same Folder
5) Open Minimal ADB and Fastboot : After Type : - adb sideload FILE NAME.zip
5) Update Successfully.
You Will LOSING OUR DATA OR CONFIGURATION
Here OTA 5.0.1 Update :
https://www.androidfilehost.com/?fid=95916177934552137

ashishk2 said:
Elated to hear about that the Lollipop update for ATT S4 is out.
Newbie here ! I own an ATT S4 running Official jelly bean, Its rooted & unlocked so that I can use here in India. Can anyone help me how do I got about with the upgrade with losing the unlock?
Do I need a custom ROM like TWRP ?
or any links to guides to how to go about it.
Click to expand...
Click to collapse
Iam from India too! ?

BhavyaBirla said:
Iam from India too! ��
Click to expand...
Click to collapse
Are ya trying to upgrade to Lollipop too ?

Hello guys,
I am also from india with S4 AT&T i337 (NJ4) and downloading this rom.
i will update u guys after flashing

ashishk2 said:
Are ya trying to upgrade to Lollipop too ?
Click to expand...
Click to collapse
Me too.. But I'll have to wait to download this! Where are yo u guys from?
gdjindal said:
Hello guys,
I am also from india with S4 AT&T i337 (NJ4) and downloading this rom.
i will update u guys after flashing
Click to expand...
Click to collapse
Sent from my SM-N910S using XDA Free mobile app

Hay guys I too not in the US so having an OTA update is indeed impossible, and my i337UCUFNJ4 is also not rooted ( i have tried many times but failed to root) and yet i want to update my phone to lollipop can you guys please tell me what to do next after i download the OTA update from here https://www.androidfilehost.com/?fid=95916177934552137
waiting for your simple and step to step guide
thanks

Thanks
talvigi said:
Hay guys I too not in the US so having an OTA update is indeed impossible, and my i337UCUFNJ4 is also not rooted ( i have tried many times but failed to root) and yet i want to update my phone to lollipop can you guys please tell me what to do next after i download the OTA update from here https://www.androidfilehost.com/?fid=95916177934552137
waiting for your simple and step to step guide
thanks
Click to expand...
Click to collapse
Manually Flash OC3 -- Lollipop 5.0.1 -- Update via Stock Recovery
1. Copy 2400258.zip to your External SdCard
2. Unplug and power off phone
3. Boot into Stock Recovery
--- press and hold BOTH power and volume up buttons
--- when you see the blue "RECOVERY BOOTING..." message in the top left corner, release power button
--- when you see the android guy, release volume up button
4. Select "apply update from external storage"
5. Browse to location of 2400258.zip and select it
6. Phone will reboot when complete.
:laugh:

@jack_ssl can I follow the instruction from JB to Lollipop ?

jack_ssl said:
Manually Flash OC3 -- Lollipop 5.0.1 -- Update via Stock Recovery
1. Copy 2400258.zip to your External SdCard
2. Unplug and power off phone
3. Boot into Stock Recovery
--- press and hold BOTH power and volume up buttons
--- when you see the blue "RECOVERY BOOTING..." message in the top left corner, release power button
--- when you see the android guy, release volume up button
4. Select "apply update from external storage"
5. Browse to location of 2400258.zip and select it
6. Phone will reboot when complete.
:laugh:
Click to expand...
Click to collapse
Well Thanks Jack_ssl, if it is so easy to do it i would really really laugh at myself not because i didn't know that all, becuase i really don't know that all but i will be happy enough that i may go crazy and laugh. waiting for my download to be completed its almost 72% now
BUt one thing the file "2400258.zip" where does it come from is it the unzipped file name of 5.0update.zip or i'll have to grab it from somewhere i don't know yet?

Yes
ashishk2 said:
@jack_ssl can I follow the instruction from JB to Lollipop ?
Click to expand...
Click to collapse
Yes .. But One Thing First Kitkat Then After Lollipop ... Ok ...:laugh:
---------- Post added at 02:59 PM ---------- Previous post was at 02:56 PM ----------
talvigi said:
Well Thanks Jack_ssl, if it is so easy to do it i would really really laugh at myself not because i didn't know that all, becuase i really don't know that all but i will be happy enough that i may go crazy and laugh. waiting for my download to be completed its almost 72% now
BUt one thing the file "2400258.zip" where does it come from is it the unzipped file name of 5.0update.zip or i'll have to grab it from somewhere i don't know yet?
Click to expand...
Click to collapse
Yes , Unzip First U Will Get 2400258.cfg .. Just Change Extension .cfg to .zip ... Then Put into the extsDcard ....

jack_ssl said:
Yes .. But One Thing First Kitkat Then After Lollipop ... Ok ...:laugh:
---------- Post added at 02:59 PM ---------- Previous post was at 02:56 PM ----------
Yes , Unzip First U Will Get 2400258.cfg .. Just Change Extension .cfg to .zip ... Then Put into the extsDcard ....
Click to expand...
Click to collapse
Doing it in the name of God and by the great work of you all guys but most perfectly you Jack, Thanks a lot
install/sdcard,,,,,
finding update package,,,,,
opening update package,,,,
verifiing update package,,,,,
insalling update,,,,,
verifying current system,,,,
removing unneeded files,,,,,
patching system files,,,,,,
patching NON-HLOS.bin img,,,,,
patching modem.bin img,,,,,,
fulll patching boot.img img,,,
package boot.img ,,,
and many more
install from sdcard complete
in the medal it showed two or more red lines of writing too cut started,
i noticed the samsung logo changed and now its the ATT logo for a minut let me wait for a cuple of minuts more
Oh yes the chage has shown its face it is the new thing i was waiting for
thanks Jack_ssl it work like charm , the method you told me works
and i am sorry Apoplectic1 you actually did the great job first by fetching the ota update thanks a lot.

[How-To] Update to G900V_PF4 - 6.0.1

**You can begin the following process from any Build/ROM but you must already have Root Access**
**Required** FlashFire - Play BETA - PREVIEW
Downloads:
- G900V_PF4_Stock_ROM.zip (For "Locked" Bootloaders - Unrooted)
- G900V_PF4_Stock_Deodexed_Debloated_ROM.zip (For "Locked" Bootloaders - Unrooted)
- G900V_PF4_Stock_Rooted_ROM.zip (For "Unlocked" Bootloaders Only!)
- G900V_PF4_Stock_Deodexed_Debloated_Rooted_ROM.zip (For "Unlocked" Bootloaders Only!)
Instructions for "Locked" Bootloaders:
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" setting to "Download."
6. Press the lightning bolt then "Ok" to begin the **flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the G900V_PF4_Bootloader using Odin's PDA/AP slot.
**The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition.
Once complete your device will reboot and pause on the Verizon splash screen for 1 - 2 minutes (10 - 15 mins for deodexed version) before completely rebooting. Done!
Instructions for "Unlocked" Bootloaders: (Your Knox Warranty Bit will be tripped!)
1. Use the following guide however the above ROM's for "Unlocked" Bootloaders are pre-"system rooted," therefore there is no need to flash the SuperSu .zip file: http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Known Issues:
- None!
Notes:
1. The process will update your Modem, Non-hlos, System, Kernel, Recovery, and Bootloader.
2. Native tethering is enabled on all of the ROM's.
3. No need to wipe prior to flashing, the ROM will automatically wipe User Data.
4. The Debloated version has all Google, most Verizon, and all Knox apps removed.
5. If you do not already have root access follow this guide: http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
6. To learn more about FlashFire's capabilities on locked bootloader devices see here: http://forum.xda-developers.com/showpost.php?p=60070810&postcount=2

Any way to flash without losing data?

MWFD said:
Any way to flash without losing data?
Click to expand...
Click to collapse
Use FF's backup function to backup then restore your data after flashing.

Confirmed that after about 7min on the VZW boot animation, the deodexed version works just fine.
I wonder how long we'll get away with using the OD5 bootloader. lol.

How do we flash the od5 bootloader?
Sent from my SM-G900V using Tapatalk

ykjae said:
How do we flash the od5 bootloader?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
odin

Details please. I know how to flash the stock rom. Just what about bootloader.
Sent from my SM-G900V using Tapatalk

Anyone have a good link to a recent version of Odin?

flamadiddle said:
Anyone have a good link to a recent version of Odin?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934550149

ykjae said:
Details please. I know how to flash the stock rom. Just what about bootloader.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Use Odin's PDA or AP slot depending on Odin version used.

So in odin I flash the bootloader. Then reboot and flash the stock deodexed rom in flashfire? & I should be all set?
Sent from my SM-G900V using Tapatalk

muniz_ri said:
however the G900V_OD5_Bootloader is required for the ROM's to run (flash using Odin's AP slot).
Click to expand...
Click to collapse
This strikes me as very important information that should be included in the steps before it instead of being a footnote. Can anyone clarify the complete steps/process? Also, any idea what the changelog is?
EDIT: I'm on the rooted OD5 ROM from here http://forum.xda-developers.com/ver...w-to-update-to-g900vod5-5-0-keeproot-t3136945 Just trying to make head or tail of the instructions in this post. Do I need to flash the OD5 bootloader since I'm already on OD5, or what?

I'm a little confused why the first 3 steps in the FlashFire process is necessary (Google+ signup part) when you include the link for v19 just below, am i missing something here? Also, not being familiar with FlashFire, once i flash OE1 will i be given the option to boot into download mode to Odin the OD5 bootloader? I'm coming from OC4 so order is crucial here I'd imagine. Another also, i generally like deodexed roms, any caveats associated with this one? advanced voice features? My Verizon access? Thanks

chetqwerty said:
I'm a little confused why the first 3 steps in the FlashFire process is necessary (Google+ signup part) when you include the link for v19 just below, am i missing something here? Also, not being familiar with FlashFire, once i flash OE1 will i be given the option to boot into download mode to Odin the OD5 bootloader? I'm coming from OC4 so order is crucial here I'd imagine. Another also, i generally like deodexed roms, any caveats associated with this one? advanced voice features? My Verizon access? Thanks
Click to expand...
Click to collapse
I left the links to the FF thread for reference as it contains good discussion re: FF's progress.
As for the bootloader instructions, I will add the steps to the instructions. I mistakenly assumed most people already had that level of understanding.
And the deodexed version is only intended for those that plan to use xposed or themes. If you do not plan on doing either use the regular rom.

muniz_ri said:
https://www.androidfilehost.com/?fid=95916177934550149
Click to expand...
Click to collapse
Thanks for the link, but I still have the same problem with it that I had on the OD5 thread: Checksum mismatch. I tried 3 different mirrors. Either it's a bad file or a bad checksum.

flamadiddle said:
Thanks for the link, but I still have the same problem with it that I had on the OD5 thread: Checksum mismatch. I tried 3 different mirrors. Either it's a bad file or a bad checksum.
Click to expand...
Click to collapse
It works fine for me. Search xda for a different version.

ykjae said:
So in odin I flash the bootloader. Then reboot and flash the stock deodexed rom in flashfire? & I should be all set?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
See updated instructions in OP.

MWFD said:
Any way to flash without losing data?
Click to expand...
Click to collapse
muniz_ri said:
Use FF's backup function to backup then restore your data after flashing.
Click to expand...
Click to collapse
Although I would recommend just following the backup/restore method as it is faster and safer, you could open the ROM with Winzip/7zip, navigate through the META-INF folder until you get to the updater-script, then open it with Notepad, and remove this part of the script:
package_extract_file("wipedata.sh", "/tmp/wipedata.sh");
set_perm(0, 0, 0755, "/tmp/wipedata.sh");
run_program("/tmp/wipedata.sh");
then save the file and if you used Winzip, close the program and choose "Update Zip file with changes". If you used 7zip, when you close Notepad, it will ask if you want to update the file in the archive and just choose "Okay".
---------- Post added at 04:18 PM ---------- Previous post was at 03:32 PM ----------
flamadiddle said:
Thanks for the link, but I still have the same problem with it that I had on the OD5 thread: Checksum mismatch. I tried 3 different mirrors. Either it's a bad file or a bad checksum.
Click to expand...
Click to collapse
muniz_ri said:
It works fine for me. Search xda for a different version.
Click to expand...
Click to collapse
It works fine for me too.

muniz_ri said:
I left the links to the FF thread for reference as it contains good discussion re: FF's progress.
As for the bootloader instructions, I will add the steps to the instructions. I mistakenly assumed most people already had that level of understanding.
And the deodexed version is only intended for those that plan to use xposed or themes. If you do not plan on doing either use the regular rom.
Click to expand...
Click to collapse
I noticed you mentioned if you already are on OC4 then you do not need to boot into Download mode, if I wanted to upgrade the bootloader to OD5 could I boot into download anyways and upgrade to OD5 (kill 2 birds with 1 stone kinda thing?)

aurfawce said:
I noticed you mentioned if you already are on OC4 then you do not need to boot into Download mode, if I wanted to upgrade the bootloader to OD5 could I boot into download anyways and upgrade to OD5 (kill 2 birds with 1 stone kinda thing?)
Click to expand...
Click to collapse
Yes

[N900] ALL-IN-ONE Guide[Root/Recovery/ROM/Knox Reset(claim warranty)/Revert-to-Stock]

Note: There are a lot of guides all over XDA-Fourm for the things that i am going to share in this thread, I am just trying to get all the things at one place and in easy manner, so i request you to please don't ask why another thread . I have mirrored all the files in this thread to my own Drive links so that it would be available till i die , you can find the original links in References at the end.
I am just a normal user, been through all of the things mentioned below just like many of you, but there are still users who are new to all these stuff. So i thought of getting all the things at one place and write the steps in a layman's language.If there is something wrong and needs to be changed, do mention that.
This guide is for the Exynos version of Samsung Galaxy Note 3 only which includes:
How to Root
How to Install recovery
How to Flash a new ROM
How to install Xposed on TouchWiz based ROMs (5.0 and 5.0.2)
How to Reset KNOX & Revert to Stock (to claim warranty)
Downloads:
1. Odin v3.07(odin application- needed to flash stuff)
2. USB Drivers(drivers for windows)
3. 'CF-Auto-Root' file by @Chainfire(to root)
4. Bootloader to Reset KNOX counter
5. TWRP Recovery (Use this when you have to flash CM based ROMS)
6. CWM 6.0.7.0 OR Philz Touch 6.47.7 (use these when you have to flash TouchWiz based ROMs)
7. Stock Firmware - from Sammobile Mirror for N900XXUEBOE3_N900ODDEBOB2_INS.zip (Indian Version)
8. XposedInstaller_3.0_alpha4 (Tried and tested)
9. xposed-v65-sdk21-arm-arter97-V5-generic OR xposed-v75-sdk21-arm-arter97-exynos.zip (Works with the latest N900ZSUEBOK3 firmware)
Step 0. Backup
Take backup of your contents (contacts, messages, images, videos, etc.)
Step 1. Getting things ready
Download & Extract and Install USB Drivers 1.5.20.
Download & Extract Odin v3.07.
Download CF-Auto-Root-ha3g-ha3gxx-smn900.tar.md5 (make sure you get a file with .md5 extension).
Step 2. Connection
Run Odin on your PC (as administrator).
Turn off your phone.
Keeping the volume down and home button pressed, turn on your phone.
Get into download mode by pressing volume up after you are asked on the phone screen.
After all the above, connect phone with USB cable to PC.
One of the box will turn yellow and confirm that the phone is connected
Step 3. Root (KNOX will show change in counter, but you can always reset that when you need to claim warranty)
Choose PDA in Odin and select the .md5 file extracted in step 1 (don't change anything else in odin)
Press “Start”, the process will complete in few seconds and phone will automatically restart.
Congrats!! You rooted your phone, you will get a SuperSu app in the app drawer.
Step 4. Custom Recovery
In Odin choose PDA and select any of the two recovery as per your need:
twrp-2.8.7.0-ha3g.tar
OR
n900-cwm6.0.7.0.tar (philz zip file is not odin compatible, you can flash it within the recovery)
the press “Start”
Step 4.1 Full Backup (Similar to Restore Point - only after flashed a custom recovery)
Turn off the phone
Keeping the volume up and home button pressed, turn on the phone, you will get to recovery.
Go to Backup & Restore and choose backup to sdcard or backup to extSdCard (will take about 10-15 minutes)
Now you have a restore point, you can go back to this state whenever you want.
Step 5. Flashing a new ROM (if you want to)
Although you must always refer the individual ROM thread as they may have some different steps, but this is a general way to flash a ROM
Download the ROM (zip file) and copy to internal/external storage on your phone.
Turn off the phone
Keeping the volume up and home button pressed, turn on the phone, you will get to recovery.
Follow as per your choice of clean or dirty flash (in the Note)
Then choose install zip, select your ROM, then “yes”
reboot the phone.
Done. You have a new ROM
Note: Clean install/flash means - wipe data/factory reset, wipe cache, wipe dalvik cache (sometimes wipe system too) then install ROM.
Dirty install/flash means – direct install without wiping any partition
Step 6. Install Xposed -only for 5.0 or 5.0.2 ROMS (if you want to, you will need a deodexed rom, won't work on stock odexed roms)
Download the XposedInstaller_3.0_alpha4 & xposed-v65-sdk21-arm-arter97-V5-generic and copy both the files to your phone (internal or sd-card).
Install the XposedInstaller_3.0_alpha4.apk but don't run the app.
Restart your phone into Recovery Mode. (turn off then pressing volume up + home and turn on)
choose install a zip, select the xposed-v65-sdk21-arm-arter97-V5-generic.zip or xposed-v75-sdk21-arm-arter97-exynos.zip
reboot your phone. (you will get android is upgrading which will take a while)
Step 7. Revert to stock with KNOX counter as 0x0 and system state as Official (you can claim warranty comfortably)
a. Download and Extract the bootloader.zip
b. Run Odin
c. Turn off your phone.
d. Keeping the volume down and home button pressed, turn on your phone.
e. Get into download mode by pressing volume up after you are asked on the phone screen.
f. Connect phone with USB cable to PC.
g. Choose PDA in Odin and select the Bootloader.tar file. (don't change anything else on odin)
h. Press “Start”, the process will complete in few seconds and phone will automatically restart.
i. Go to download mode and check if the Knox has turned back to 0.
j. Now choose PDA on odin and select the official firmware (download from the above provided link) and press Start
k. After completion of the process let the device start but don't setup the device, just turn it off.
l. Reboot to stock recovery by pressing vol up + home + power and wipe data/cache and flash the firmware again, once flashing the firmware is completed enter download mode and check if current binary and system status has turned to official. If not repeat the process from step j.
Credits & References:
1. Reference Guide to Reset KNOX thanks to @RuchRha
2. Reference to all the three recoveries thanks to @uzairabdulmajeed
3. SamMobile for stock firmware links
4. OdinDownloads for odin and drivers
5. Working Xposed for 5.0 & 5.0.2 based roms thanks to @arter97 (i have not tried newer versions)
6. Thanks to the whole XDA Community, we all are connected because of it.

Reserved
Changes:
Added new Xposed v75 link that works with the latest stock firmware - N900ZSUEBOK3 (deodexed), as previous version was giving boot loop with alexega deodexed rom.
For the 5.0.1/5.0.2 based aurora roms (s6/note5) port you can use previous version provided (v65) and the apk is the same - XposedInstaller_3.0_alpha4

Reserved 2
Reserved 2

thnks i was just not rooting my new 3 days old note 3 just because of knox warranty issue, thnks for helping, rooted my phone. just wanna b sure that will i get knox 0 if i wanted?

raman99311 said:
thnks i was just not rooting my new 3 days old note 3 just because of knox warranty issue, thnks for helping, rooted my phone. just wanna b sure that will i get knox 0 if i wanted?
Click to expand...
Click to collapse
yes, you can get the KNOX to 0 whenever you want (there is nothing like hardware fuse). i have done that thrice
just download the bootloader file and the original firmware.
Also you can check out the referenced thread, users have posted their knox status photos

kaliyaakakallu1 said:
Step 6. Install Xposed -only for 5.0 or 5.0.2 ROMS (if you want to)
Download the XposedInstaller_3.0_alpha4 & xposed-v65-sdk21-arm-arter97-V5-generic and copy both the files to your phone (internal or sd-card).
Install the XposedInstaller_3.0_alpha4.apk but don't run the app.
Restart your phone into Recovery Mode. (turn off then pressing volume up + home and turn on)
choose install a zip, select the xposed-v65-sdk21-arm-arter97-V5-generic.zip
reboot your phone. (you will get android is upgrading which will take a while)
Click to expand...
Click to collapse
Can xposed run on odex stock TW, sir? Or cook, or only deodex stock? Thanks sir!

sieuan said:
Can xposed run on odex stock TW, sir? Or cook, or only deodex stock? Thanks sir!
Click to expand...
Click to collapse
xposed runs only on deodexed rom mate.
i will add this to the post.

i tried using this method, knox turned zero but the system status remains to custom. i am flashing stock rom using odin. any help?
edit : tried the whole process again and the system status turned to official , thanks

I keep getting stuck on the PIT thing then Complete(Write) fail error happens. I have repartition unticked and install then removed KIES for the driver. It's for SM-N900.

Razraffion said:
I keep getting stuck on the PIT thing then Complete(Write) fail error happens. I have repartition unticked and install then removed KIES for the driver. It's for SM-N900.
Click to expand...
Click to collapse
You don't have to change anything in PIT, all you need to do is select PDA and choose the file.
Sent from my SM-N9200 using XDA Free mobile app

raman99311 said:
i tried using this method, knox turned zero but the system status remains to custom. i am flashing stock rom using odin. any help?
edit : tried the whole process again and the system status turned to official , thanks
Click to expand...
Click to collapse
Yes, it always works for me too at the second time only
Sent from my SM-N9200 using XDA Free mobile app

kaliyaakakallu1 said:
Reserved
Click to expand...
Click to collapse
It was very helpful
Thank You

El Matpouly said:
It was very helpful
Thank You
Click to expand...
Click to collapse
Good to hear that
Sent from my SM-N9200 using XDA Free mobile app

Lol know im thinking to buy an exynos note 3 and sell my snapdragon (due to knox reset)
Knox apps are working ?

xda_Noob. said:
Lol know im thinking to buy an exynos note 3 and sell my snapdragon (due to knox reset)
Knox apps are working ?
Click to expand...
Click to collapse
Haha
Yes after reset, all knox system and app working great
Sent from my SM-N9200 using XDA Free mobile app

hello
How can i get bootloader for reset knox on my galaxy S6 model G920F.i need to reset knox from ox1 to 0x0

beka_soft said:
How can i get bootloader for reset knox on my galaxy S6 model G920F.i need to reset knox from ox1 to 0x0
Click to expand...
Click to collapse
I have no idea about S6, you may ask in the s6 forum and there you might get your answer
Sent from my SM-N9200 using XDA Free mobile app

Great guide - helped me a lot with my first root - thanks!

thank you
you are the best

Changes:
Added new Xposed v75 link that works with the latest stock firmware - N900ZSUEBOK3 (deodexed), as previous version was giving boot loop with alexega deodexed rom.
For the 5.0.1/5.0.2 based aurora roms (s6/note5) port you can use previous version provided (v65) and the apk is the same - XposedInstaller_3.0_alpha4

Delete

Please Delete

is good news!! I would follow the unlock bootloader post and see if you have any luck with that.

Chadwick108 said:
is good news!! I would follow the unlock bootloader post and see if you have any luck with that.
Click to expand...
Click to collapse
He can't. He has a CID11xxxx eMMc chip.

I remember back when you couldn't downgrade after OE1. It's good it we can now. I'm on PB1 everything with unlocked bootloader. Wonder if I can simply boot to recovery and flash a KK from and KK kernel.

I confirmed it is working
I confirmed it is working i have a recovery lock that wont go away pretty much the same as a locked bootloader good work!

aholeinthewor1d said:
I remember back when you couldn't downgrade after OE1. It's good it we can now. I'm on PB1 everything with unlocked bootloader. Wonder if I can simply boot to recovery and flash a KK from and KK kernel.
Click to expand...
Click to collapse
Flash a kitkat kernel and kitkat system it will boot on PB1 bootloader

I got past reactivation lock
I hope you don't mind brens123 i used your guide to help get past reactivation lock and mentioned your guide in a new thread i started
http://forum.xda-developers.com/ver.../reactivation-lock-off-finally-stuck-t3433342
Bren123 said:
Flash a kitkat kernel and kitkat system it will boot on PB1 bootloader
Click to expand...
Click to collapse

Confirmed
Confirmed this works. I was stuck because i couldn't take the reactivation lock off but with these instructions i went back to NCG and was able to take it off. After taking reactivation lock off i rooted with towel root and unlocked the bootloader. Then flashed a rooted PF4 rom with TWRP!!

---------- Post added at 09:28 PM ---------- Previous post was at 09:27 PM ----------
[/COLOR]
Nwn_Abey said:
Confirmed this works. I was stuck because i couldn't take the reactivation lock off but with these instructions i went back to NCG and was able to take it off. After taking reactivation lock off i rooted with towel root and unlocked the bootloader. Then flashed a rooted PF4 rom with TWRP!!
Click to expand...
Click to collapse
Were you able to unlock the bootloader on a CID11 chip? Meaning CID11's can be unlocked if they are on KitKat?

leotakacs said:
---------- Post added at 09:28 PM ---------- Previous post was at 09:27 PM ----------
[/COLOR]
Were you able to unlock the bootloader on a CID11 chip? Meaning CID11's can be unlocked if they are on KitKat?
Click to expand...
Click to collapse
No chaging to kitkat will not allow you to unlock the bootloader on Toshiba chips sorry. gave away my Toshiba s5 and got a 15 CID Verizon Note 4 and unlocked it.

I would recommend maybe clarify your guide for readability as I found it somewhat confusing just a humble suggestion

[email protected] said:
I would recommend maybe clarify your guide for readability as I found it somewhat confusing just a humble suggestion
Click to expand...
Click to collapse
OK thanks! I will later it's 2am right now haha.

No worries man good job on this method

Bren123 said:
Ok so i managed to boot kitkat on PB1 bootloader safestrap works perfectly
I was on stock PB1 rooted and flashed NCGStocktar.md5 without a bootloader in flashfire the tar wouldnt flash in odin it would fail before writing anything then i rebooted into download mode before it booted and flashed NCG kernel then NCG Modem and rebooted set it up and rooted with towelroot and then installed safestrap apk and everything worked like its supposed to
1. Open Flashfire Grant it root access Click the plus in the bottom right hand corner and click flash firmware package choose the NCGStocktar.md5 and let it verify the MD5 then make sure boot, recovery, system and cache are selected make sure modem firmware and firmware are on checked then click the check mark in the top right hand corner then look for process cache click it and uncheck Enable and allow cache wipe then click that check mark then click everroot and uncheck inject SuperSu then click the check mark and then click Reboot and choose Download then click The plus again and choose Wipe make sure System Data, 3rd Party apps, dalvik cache, cache partition, cache partition format then click flash and click ok when it says it will go black for a second if its black for more than a minute pull the battery and retry
2. Once In Download Mode open odin and make sure your device shows up under ID:COM it should be like blue now click options and uncheck auto reboot and in AP choose the NCG Stock Kernel then click start then once thats done it shouldnt reboot click reset then choose the NCG Stock Modem then pull battery and power on the phone.
3.Set it up like new then install Towelroot and click make it rain it should say rooted no reboot required go to the play store and download SuperSU and open it it should say update SU binary click ok and choose normal Method once its done click reboot then download busybox and grant it root access then install it then download safestrap apk and grant safestrap root access then accept the license agreement and click install Safestrap Then click reboot to recovery and you should be in safestrap then choose system then reboot in safestrap and let it boot it will say safestrap disabled just click continue or wait 10 seconds and there you go you have kitkat
NCG Kernel: https://www.androidfilehost.com/?fid=23991606952612346
NCG Modem: https://www.androidfilehost.com/?fid=23991606952612348
NCG Stock Tar: https://www.androidfilehost.com/?fid=23991606952612350
Towelroot apk: https://Towelroot.com/tr.apk
Flashfire: https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
The files are in zips extract them with 7-zip or Winrar.
Where I got the links from: http://forum.xda-developers.com/showthread.php?t=2784880
Click to expand...
Click to collapse
I confirm is working like you state .Now i am playing with alliance 4.4.2 ROM .Tomorrow I will try to install MM from KK to see if working from here. Good job !

Thanks @Bren123 for the confirmation.
I'm sure this will be useful for plenty of users wishing to go back to kk :good:

Bren123 said:
Ok so i managed to boot kitkat on PB1 bootloader safestrap works perfectly
I was on stock PB1 rooted and flashed NCGStocktar.md5 without a bootloader in flashfire the tar wouldnt flash in odin it would fail before writing anything then i rebooted into download mode before it booted and flashed NCG kernel then NCG Modem and rebooted set it up and rooted with towelroot and then installed safestrap apk and everything worked like its supposed to
1. Open Flashfire Grant it root access Click the plus in the bottom right hand corner and click flash firmware package choose the NCGStocktar.md5 and let it verify the MD5 then make sure boot, recovery, system and cache are selected make sure modem firmware and firmware are on checked then click the check mark in the top right hand corner then look for process cache click it and uncheck Enable and allow cache wipe then click that check mark then click everroot and uncheck inject SuperSu then click the check mark and then click Reboot and choose Download then click The plus again and choose Wipe make sure System Data, 3rd Party apps, dalvik cache, cache partition, cache partition format then click flash and click ok when it says it will go black for a second if its black for more than a minute pull the battery and retry
2. Once In Download Mode open odin and make sure your device shows up under ID:COM it should be like blue now click options and uncheck auto reboot and in AP choose the NCG Stock Kernel then click start then once thats done it shouldnt reboot click reset then choose the NCG Stock Modem then pull battery and power on the phone.
3.Set it up like new then install Towelroot and click make it rain it should say rooted no reboot required go to the play store and download SuperSU and open it it should say update SU binary click ok and choose normal Method once its done click reboot then download busybox and grant it root access then install it then download safestrap apk and grant safestrap root access then accept the license agreement and click install Safestrap Then click reboot to recovery and you should be in safestrap then choose system then reboot in safestrap and let it boot it will say safestrap disabled just click continue or wait 10 seconds and there you go you have kitkat
NCG Kernel: https://www.androidfilehost.com/?fid=23991606952612346
NCG Modem: https://www.androidfilehost.com/?fid=23991606952612348
NCG Stock Tar: https://www.androidfilehost.com/?fid=23991606952612350
Towelroot apk: https://Towelroot.com/tr.apk
Flashfire: https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
The files are in zips extract them with 7-zip or Winrar.
Where I got the links from: http://forum.xda-developers.com/showthread.php?t=2784880
Click to expand...
Click to collapse
op bren123 do you mind if i put a link to your guide in a new thread i made http://forum.xda-developers.com/ver...ware-g900v-t3468824/post68857411#post68857411

Nah I don't. Go ahead Kief.

OK thanks
Sent from my SM-G900V using Tapatalk