Related
This is my first post on these forums and I would like to start off by saying this is one of the best sites I have found and has already taught me so much. Ok so here is my problem. I recently realized that I can unlock my phone (I have a T-Mobile Dash) but I did not know how to go about doing it. So I looked and looked and read and read and decided to pay $39.00 and get an unlocker program from GSMliberty. I’m not sure if GSMliberty is a credible site but I still went thru them. I made the payment and followed the instructions on what to do. I connected my phone to my computer and once active sync was connected I ran the unlocker. Every time I tried this I received this error
I submitted a trouble ticket with the company and they sent me this reply:
"Make sure to run the unlock from home. Run active sync, then connect the phone while it's on in Windows mode with NO SIM or memory card. Rerun the unlock software. Only 1 active sync session must be running on system tray.
ALL firewalls, anti-virus software and pop-up blockers have to be off."
I have no clue how to fix this issue or what I am doing wrong and I am extremely frustrated with the whole dilemma but my question right now is what the heck windows mode is? I have never heard of windows mode before, I thought because I have a windows mobile phone that my device is always in windows mode lol. Anyways I am sorry for this long post but any help will make me feel better. Thank you in advance and once again sorry for this long thread.
LiG
Nevermind I figured everything out!!!
lignsocal said:
Nevermind I figured everything out!!!
Click to expand...
Click to collapse
I curious, what did you do to get it working? And, is is CID and SIM unlocked?
Yes it is SIM and CID Unlocked. I went thru IMEI-Check instead of GSM Liberty but I found out that if you get this error message while running the program all you have to do is unplug the USB cable from your device then stop the unlocker program, then re insert the USB cable back into the phone and right after that start the Unlocker program again. The program will pick up where it left off. I found this out after trying to get this to work for about a week. If any one decides to go with IMEI-check and they get an error message just do exactly what I explained and everything will work out!!!
Hey guys, let me just start off by saying I have spent almost 8 hours straight today trying to figure this out and dig myself out of a hole I've created for myself, that being said, I'm going to try and be as detailed as possible so you guys know EXACTLY where I am and what I've tried. This post looks long but that's because it is. It's pretty much my entire day's worth of trouble typed out. So just bare with me and see if you guys can help me out here!
I have a T-Mobile Galaxy S4 model: SGH-M919 it has Android 4.4.2. Now on to the problem: I've had this phone for almost a year now and a few months ago I rooted it. Did a simple Youtube tutorial and used Odin to do the work and everything worked out fine. A couple months down the road (yesterday), after using the phone like a teenager, downloading apps and cluttering it up it started to slow down and not run some apps. After thinking about it I decided to factory reset it. All of my contacts, photos, and videos were backed up on Google so I thought "why not?" Well, this is where $#!% hit the fan.. being rooted then factory reset, right before the phone came online it had me answer two questions about the root. Something to the effect of "Do you want to keep root? (This option is not reversible)" I thought since I wasn't using the features I originally rooted the phone for I figured nah just get rid of the root. So the phone did its T-Mobile boot up and started the Initial setup.
Everything up to to this point was fine until I wanted to log in to my Google account during the setup. Please understand that where I am I have full 4G LTE coverage and have access to a pretty fast and sturdy wifi connection. Well, when it came to the google sign in I entered my email and password and it came up with a message reading "Can't Sign in - Can't establish a reliable connection to the server" (believe me i wish that was the only issue) so after reading that, I thought I'd try with my wifi.. nope. Same thing. Since neither my 4g or wifi worked I thought it was Google's servers so I tried again this morning, same thing. (keep in mind at this point i think my phone isn't rooted anymore.) I call the t mobile store and they give me a technical support number, so I call it and I tell them i cant sign into Google. The gentleman told me he cant do anything because he can tell my phones been rooted. Only thing he suggests is to contact Google, well, the customer care number just tells you go to google.com/support and there's nothing there about my problem.
This is where I dig my hole even deeper. I tried another factory reset and up in the top left corner i still see that root text. Even the rooted android symbol pops up before the Samsung logo or t mobile. Since I saw that I thought "ohh it just didn't get unrooted all the way." I look up ways to completely remove a root and a lot of them require plugin your phone into the computer and using Odin to flash a stock firmware on to the device. I went to plug my phone into the usb port but my computer didn't recognize the usb device, having experienced this a long time ago I searched around for the latest Samsung usb drivers and I installed those. Device still isn't recognized. Let me just note before people tell me to use MTP mode or Developer tools> usb debugging or connection mode.. The only thing that happens when plugging my phone via usb is the phone starts charging and my computer makes the trumpet noise like something is plugged in. Other than that, there is NO notification of it being plugged in. The reason i stress this is because I called Samsung technical support at this point and the guy (not gentleman) treated me like a 5 year old and ran me through all of these options after i told him I already did everything he was suggesting, including downloading Samsung Kies 3 and having it install the drivers. It does not pick up the device either.. at this point I looked up ways to remove the root without the computer. I found out you can just go into the root app "SU" or something and theres a remove root option. I jumped on that opportunity and had it removed. I restarted the phone and all the problems still persist, it even still has the root text on the top left when you factory reset it again. However now, even if you factory reset and select the option "keep root," thinking it would bring back the"SU" app it does NOT.
So lets recap. I have a phone that thinks its rooted and even appears rooted to t mobile but doesn't have any of the root apps or privileges or capabilities to fix my Google log in issue (like the host file in filemanager). And I can't re-root to get that app back because none of my 3 usb ports, 3 different usb cables (one being the cord that came with the phone), or any of the ports/cables on someone else's computer will recognize the darn thing to work on that way! I have all these issues that are supposed to fix each other but I can't do any fixing because they cancel each other out too... I'm at a dead end.
In case this isn't the right forum/website/thread/post area etc.. I have this whole message saved in Microsoft Word document so I can repost it anywhere you guys might suggest better results. Any help/advice will be much appreciated.
Greetings to all the developers and registered users on this site... Yes, this is my first post, but I read here pretty often and I used the search function, trust me! Seriously, I've tried all I could and I am at my wits end, but this is technology, we can't let it own us, we gotta continue owning it and that's what online communities like xda help us do, so thanks for all your past, present, and future contributions here. So I got this Metro PCS Kyocera Hydro Wave (C6740N) that I can't factory reset for a number of reasons, but mainly because I believe that there is either no boot-loader or no recovery partition as a result of Metro PCS flashing the ROM...
Anyway, lets get to the juice:
- Device powers on/off, but no combo of Vol -/+ and Power buttons bring up a recovery menu or anything (holding any combo down just boot-loops)
- Device has no SIM and no micro SD card, and the battery is not removable
- Device is locked... Like, pattern-locked/google account info/too many attempts/yada yada yada
- Device has no data and no WiFi connection active, so I could not use the google account to get past the lockscreen
- Device does not have USB debugging enabled/Google drivers for ADB do not work (Windows 7 auto-detects when I plug in the phone and installs a generic Microsoft driver which cannot be removed even after uninstalling the device, and also I pointed the Device Manager to the correct Google drivers I installed with the Android SDK Tools, as well as the Samsung Naked Universal Drivers I found on this forum, and Kyocera ADB drivers I found through Google which all failed, Windows returned a message stating that the most up-to-date or best driver for this device is already installed)
What I've tried (everything possible really):
- Hard reset/Recovery from phone: FAILED
- Connect to Linux and install ADB, then tried running the adb shell, adb devices, fastboot devices, etc but phone not detected: FAILED
- Connect to Windows 7 and install ADB (Android SDK Tools), I literally checked every single box and installed Platform-tools, google drivers, everything, got to the command prompt as admin, cd to the ADB directory, ran same commands as in linux, also tried commands on several forums and posts like adb shell rm /data/system/gesture.key to remove the lock but everything: FAILED
- Connect to Windows 7 and attempt to install proper drivers using RootGenius, MoboRobo, PDAnet, and several other suggestions which all were oblivious/unable to detect the device despite Windows recognizing it, so they all: FAILED
- Connect to Windows 7 and attempt running ADB through a Cygwin terminal, but the command "sudo" was not recognized/not valid, so: FAILED
- Connect to Windows 7 and use XRYViewer to extract data from the phone, possibly to see the system files and get an actual understanding of what everybody is saying you need to mount from the recovery partition, but no clue how to use this, since I can't find an XRY file in the internal storage, so: FAILED
- Connect to Windows 7 and access data/recover data from device using "Wondershare Dr.Fone for Android" and "iLike Android Data Recovery Pro" but both programs instructed me to enable USB Debugging, which is not possible, so the both also: FAILED
Despite this being my first post, I have scoured the forums here in addition to every other forum and webpage regarding this issue as well... There just isn't much about this phone except negative reviews, and I have come to the conclusion that on this particular model phone, I am out of options... I have a paperweight... I'm not very familiar with Android... So please correct me if I'm wrong...
Any input?
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Mojo2XL, I guess you did not find an answer?
Mojo2XL said:
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Click to expand...
Click to collapse
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
barabeka said:
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
Click to expand...
Click to collapse
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
elliwigy said:
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
Click to expand...
Click to collapse
okay. i will try something, when my phone will come. is your Wave locked?
barabeka said:
okay. i will try something, when my phone will come. is your Wave locked?
Click to expand...
Click to collapse
i bought another phone and they threw it in free but it has a pin code lock so i cant even get to google screen to bypass frp as im stuck at pin lockscreen and these darnphones have no recovery..
i doubt ull figure out a way as im real savvy with this stuff lol theres no recovery to boot into in order to reset and no way to update tje phone wothout knowing the pin code
any luck? i cant believe this thing is this locked down. makes apple look like chils play
warriorpluto said:
any luck? i cant believe this thing is this locked down. makes apple look like chils play
Click to expand...
Click to collapse
i believe it can be done with a pc
Did you happen to get the files the other member posted that was only available for eight days?
Mojo2XL - Sort of.
I saw a youtub video (sorry no link) that says there was a OTA update that changed the phone's firmware that solved all the problems mentioned here. Thing is I have no carrier and cannot find this new firmware, but, I am still hunting....
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
I'm having the same problem, I have been trying to get this thing to hard reset for a week now. There has to be a way to reset this Hydro Wave.. Has anyone dealt with this thing?
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
WhiteWolf77 said:
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
Click to expand...
Click to collapse
That doesn't work on this phone the hydro wave from AT&T has factory reset protection so it cannot be reset using the volume down and power button reset
Any update?
dannybz said:
Any update?
Click to expand...
Click to collapse
let me work on this, been trying to master as many FRP bypasses as i can. I don't have the device but a client is in the same boat
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
PhoneScrambler said:
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
Click to expand...
Click to collapse
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
I'm new to this forum, but NOT new to this site . I have visited here on numerous occasions seeking the help that needed . With that being said, I would like to offer a Bonafide, Tried and True way to factory reset the Kyocera Hydrowave . I KNOW that this work's for I have done in on numerous occasions for a friend of mine that works for Metro PCS ....
Step One: Completely power off the phone .
Step Two: Hold the Power AND Volume DOWN Buttons SIMULTANEOUSLY .
Step Three: DO NOT release any buttons, even when you get to the Boot Menu . (Very Important, If you don't do it right, you have to start all over lol ) .
Step Four: Once inside the Boot Menu, ONLY release the Power Button; or the Boot Menu will close and you have to start all over again .
Step Five: Use the Volume Down Button to Highlight the Wipe/Factory Reset Option .
Step Six: Use the Power Button to Select the option .
Step Seven: Watch the bottom of the screen for the progress, and then use the Volume Up Button to restart .
And there you have it . I hope that this helps out SOMEONE out there, because I feel good giving back for the help that I have received on here .
PS.( If you would like for me to post a Video Tutorial on this, can someone please tell me how to post the Video; I guess by me being a Newbie on here, I'm not allowed to do as of yet ) . If Anyone needs to contact me, as I'm not on here very often, my email is [email protected] .
LilAnt530 said:
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
Click to expand...
Click to collapse
As unrealistic as it may sound it actually works Trust me on this. its similar to the LG attack which... is nothing but entering a long password.
betanews.com/2015/09/16/bypass-the-android-lollipop-lockscreen-by-entering-a-really-long-password
Just give it a go. it already worked for one dude on youtube. it takes a while but it honestly works. If you can get it, update the phone as soon as possible turn the screen timeout off and let it update. when the phone resets the update will install and you will be able to factory reset.
I mean it couldn't hurt. if you're locked out with no factory reset and ADB tools won't work what else can you do?
Hi
Hopefully my title/question isn't too cryptic.
I am a Note 4 user and have been flashing ROM's (thank you Dr.Ketan) and RECOVERY's for a few years now, but on a fairly basic level - so I'm no programmer.
However the issue I have today, that I cannot seem to resolve, is with my wife's Samsung J3 (J320FN) on 5.1.1 stock.
She's let our daughter play with it and our daughter has put a password on the lockscreen but can't remember what it was (or more likely won't tell us what it is).
My initial thought was to install TWRP then view data/system to delete the 3 lockscreen files. Voila! I've done this before on her previous J3 (that she destroyed when she dropped it down the toilet).
However on her new J3 I didn't have the foresight to enable USB debugging or OEM unlock so when I go to flash TWRP, it fails due to FRP.
I've researched on here / Youtube / other sites and can see various methods of getting around this (e.g. rootjunky's method) but they involve going into stock recovery and performing a factory reset / wipe.
But we don't want to wipe the data.
My wife hasn't backed up her phone via KIES and when I asked her for her password for her Samsung account or Google account to see if she had backups online, I got that blank look that a non-technical person gives you when you ask them for their password to help them out with something.
So ultimately we want to get past the lockscreen password to get into the phone, clear the lockscreen password, back up her data / images etc., and reset her Samsung account password (if she set one up) and the Google password.
Am I missing the obvious here? Can it be done? Can TWRP be installed in a manner that bypasses FRP?
Any thoughts would be most appreciated.
Thanks
Spanker333
Update: I tried flashing the stock ROM which "seemed" to work, but it didn't change anything. The phone still booted to the password screen.
http://www.rootjunky.com/universal-samsung-frp-bypass/
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
Doesnt require a reset at least I don't think. I just did this on a s7 edge last week and can confirm it works. I used NFC android beam to beam the apk to the s7 edge that way it was in the internal storage of the s7
---------- Post added at 06:32 PM ---------- Previous post was at 06:30 PM ----------
If it's just a lock screen issue try wondershare dr fone android recovery. Theres an option to bypass lock screen
Thanks for the reply droseofc
I tried your link and used Realterm (as per rootjunky instructions) but because the phone was locked, the commands brought up a locked error.
I tried Android Beam to send a file and then I tried by bluetooth (the J3 has bluetooth switched on). But nothing. I think it is because it locked at the password stage that it won't allow anything to be received that way.
I do own a copy of Dr/Fone Wondershare and I did try that before, however there are only certain phones supported for some features and the J3 isn't one of them.
It's a tough nut to crack!
I shall keep trying.
Cheers!
If you could get into the samsung account online theres a feature on samsung find my phone to unlock the phone screen. Id try resetting samsung password, usually some type of verification is only needed and most of the time a reset link sent to the email on account. What about calling the phone to bypass the lock screen, or if you flash twrp and access the files through twrp to make a backup or hook to pc and drag and copy folders wanted kept. On some phones if the password is entered wrong a certain amount of times itll prompt for a backup pin which may b easier. Although on some phones factory reset automates after a certain amount of incorrect attempts too.
Spanker333 said:
Thanks for the reply droseofc
I tried your link and used Realterm (as per rootjunky instructions) but because the phone was locked, the commands brought up a locked error.
I tried Android Beam to send a file and then I tried by bluetooth (the J3 has bluetooth switched on). But nothing. I think it is because it locked at the password stage that it won't allow anything to be received that way.
I do own a copy of Dr/Fone Wondershare and I did try that before, however there are only certain phones supported for some features and the J3 isn't one of them.
It's a tough nut to crack!
I shall keep trying.
Cheers!
Click to expand...
Click to collapse
---------- Post added at 08:23 AM ---------- Previous post was at 08:20 AM ----------
Reread title and realize twrp is what ur trying to do. If usb debugging is enabled there are adb commands you can send to phone to access frp setting
---------- Post added at 08:26 AM ---------- Previous post was at 08:23 AM ----------
Lol and reread post, no usb debugging. You could try factory recovery and pull a backup using adb. Idk if usb debugging has to be enabled for factory recovery or not. If you reflashed a stock file it shouldve completely wiped internal storage. What is the lock screen exactly
Hi
I had tried adb to try and sideload a rootjunky apk but that didn't work (probably because I didn't really know what I was doing lol).
Yes, the TWRP wouldn't install because of the FRP.
We got the Google account password (reset it) and then went to Android Device Manager > Lock and set a new password.
Just when I did that there was a small blue message under the ADM that stated that the phone was now locked BUT since it already had a password on the lock screen the new one wouldn't be needed.
I thought that ADM would set a new password lock for the phone because that's what I had seen in some Youtube videos. But apparently it will set a new password for the lock screen if the previous lock method was code or pattern - but not if there was already a password.
I tried the "calling the phone > answering > backing out of the phone app" method, but that didn't work.
I tried entering the password multiple times to get the 30 second wait, hoping that after trying this many times I would get an option of "Forgot Password" and a reset link. But nope. Not having it.
I wish I had thought of trying to get into a Samsung account but the wife seemed adamant that she hadn't set one up to start with so that wasn't at the forefront of my mind.
So I went recovery > wipe / factory reset in the hope that I could use my Dr.Phone to recover deleted files. A bit of a long shot but worth a go as that programme has done wonders in the past.
However, due to FRP when I am at the setup screen I am asked to enter the email address associated with the Google Account that was on the phone before. To be expected of course. However entering the Google account login details isn't working now so I've just been to my local Maplins (like Radio Shack I guess) and bought an OTG adaptor.
I'm now going to try and follow another one of rootjunky's videos to bypass the FRP (I tried the most recent one where he used another phones wifi to tether to but it wouldn't work).
I've not heard of the adb. Idk command you mention but I'll do a search on it to see how it is used.
What a ton of messing to get to this stage. But I like doing this stuff anyway so the challenges are welcome.
Once the OTG method works I need to root the phone to get Dr.Fone to work as from previous experience with the old J3, it needs root to work.
Having fun!
Cheers
(PS. "What is the lock screen exactly" - the screen that comes up after boot and prompts you for a password / pattern / code to get to the home screen. Not sure if that is what you meant in your question though).
Idk if u tried this method but i did successfully after a reset done the way you did and to bypass the same dilemma you describe. http://www.bane-tech.com/samsung-frp-bypass-universal-method/ the trickiest part is probably catching the phone in time after the call screen pops up after entering commands in realterm. I suggest watching the video and pausing as you go to make sure each step is done.
Spanker333 said:
Hi
I had tried adb to try and sideload a rootjunky apk but that didn't work (probably because I didn't really know what I was doing lol).
Yes, the TWRP wouldn't install because of the FRP.
We got the Google account password (reset it) and then went to Android Device Manager > Lock and set a new password.
Just when I did that there was a small blue message under the ADM that stated that the phone was now locked BUT since it already had a password on the lock screen the new one wouldn't be needed.
I thought that ADM would set a new password lock for the phone because that's what I had seen in some Youtube videos. But apparently it will set a new password for the lock screen if the previous lock method was code or pattern - but not if there was already a password.
I tried the "calling the phone > answering > backing out of the phone app" method, but that didn't work.
I tried entering the password multiple times to get the 30 second wait, hoping that after trying this many times I would get an option of "Forgot Password" and a reset link. But nope. Not having it.
I wish I had thought of trying to get into a Samsung account but the wife seemed adamant that she hadn't set one up to start with so that wasn't at the forefront of my mind.
So I went recovery > wipe / factory reset in the hope that I could use my Dr.Phone to recover deleted files. A bit of a long shot but worth a go as that programme has done wonders in the past.
However, due to FRP when I am at the setup screen I am asked to enter the email address associated with the Google Account that was on the phone before. To be expected of course. However entering the Google account login details isn't working now so I've just been to my local Maplins (like Radio Shack I guess) and bought an OTG adaptor.
I'm now going to try and follow another one of rootjunky's videos to bypass the FRP (I tried the most recent one where he used another phones wifi to tether to but it wouldn't work).
I've not heard of the adb. Idk command you mention but I'll do a search on it to see how it is used.
What a ton of messing to get to this stage. But I like doing this stuff anyway so the challenges are welcome.
Once the OTG method works I need to root the phone to get Dr.Fone to work as from previous experience with the old J3, it needs root to work.
Having fun!
Cheers
(PS. "What is the lock screen exactly" - the screen that comes up after boot and prompts you for a password / pattern / code to get to the home screen. Not sure if that is what you meant in your question though).
Click to expand...
Click to collapse
---------- Post added at 02:24 PM ---------- Previous post was at 02:18 PM ----------
As for lock screen i was meaning more like was it pin, pattern, password, fingerprint etc. But since you are passed that id recommend the method that involves frp apk to phone, you may have a hard time with that without nfc, u may be able to sideload it using stock recovery and hooking to a pc, idk if the pc will recognize it as storage though. There are adb commands to send files to a phone, you may be able enter adb via recovery. Unless u have a sd slot or a usb that also has the phone mini usb on other end and u could put apk on usb and plug usb into phone and navigate to it when needed.
---------- Post added at 02:29 PM ---------- Previous post was at 02:24 PM ----------
Once you got that all done id recommend using deft to recover files, its a linux distro, free and can be used without installing aka live. Its said to be used by law enforcement and military. Theres also a manual download which id suggest having just in case. Itd be the most thorough way of recovery but also requires a bit of focus as its advanced. Otherwise there are several android recovery programs, most working the best if phone is rooted.
ironically I received a J3 j320r that is google lock out. Basically i fix or clean/upgrade pcs/cells just by word of mouth and today got the j3. definitley can not use that root junky method, the realterm shows error on each command send. it does have a sd card slot though, but need to access dialer somehow. you figure any ways out?
---------- Post added at 12:44 AM ---------- Previous post was at 12:44 AM ----------
or did u give up and give it to the person that gave it to me? lol
droseofc said:
ironically I received a J3 j320r that is google lock out. Basically i fix or clean/upgrade pcs/cells just by word of mouth and today got the j3. definitley can not use that root junky method, the realterm shows error on each command send. it does have a sd card slot though, but need to access dialer somehow. you figure any ways out?
---------- Post added at 12:44 AM ---------- Previous post was at 12:44 AM ----------
or did u give up and give it to the person that gave it to me? lol
Click to expand...
Click to collapse
I have had my J3 almost two weeks I'm almost sure it has the latest security patch and I can not get a keyboard to pop up I even went as far as Copying Pasting almost a full account info registration but was short one # to complete it it has One # A 8..well Ive exhaustied most steps I'm hoping today I can finally use MY less then two week old FRP locked J320W8 LOL..any help would be great but yes I get stuck without keyboard
Sent from my SM-G900W8 using XDA-Developers mobile app
At this same time i had a zte warp 7 that was similar in setup but didnt have samsung nemore to test but should still work. Alls you may need to do is another reset because the keyboard should pull up.
The farthest i got into the phone itself is by resetting it through recovery, and when the phone first turns on it asks you if you want to enable accessibility. This is the only time it will ask so if you miss it u have to reset again. But click on accessibility and enable talkback and switch access. With switch access it will popup a tutorial u can skip or do. But with switch access on you can swipe down and to the right which will bring up a menu, i went to switch access settings and gesture control and customized the side double tap to recent apps. With the swipe down and to right i believe i clicked talkback settings and through that i was able to get to the phone settings. You have to get to app settings i cant remember exactly how but its only possible with switch access on. Once you do you can swipe down and to right to turn off switch access which will turn itself back on if u turn screen off and back on jst n case u need it to get back as its easier with it off once u get where u need, but can only get there with it on, sometimes depending on wat u click it'll take u back to setup wizard where its locked, turn screen off back on and doubletap or swipe down right to get recent apps or settings again. In the app settings i went through each one and enabled what i thought to help such as internet browser security settings allowing access to each. If you force stop and clear data on the setupwizard (green one I think) it will reenable the swipe down bar up top. I got as far as logging in google account using a chrome browser popup by clicking one of the terms and conditions links. Got notified of log in and everything but still locked out. Wouldnt install apps no matter what i tried.
Cassybalfourjr said:
I have had my J3 almost two weeks I'm almost sure it has the latest security patch and I can not get a keyboard to pop up I even went as far as Copying Pasting almost a full account info registration but was short one # to complete it it has One # A 8..well Ive exhaustied most steps I'm hoping today I can finally use MY less then two week old FRP locked J320W8 LOL..any help would be great but yes I get stuck without keyboard
Sent from my SM-G900W8 using XDA-Developers mobile app
Click to expand...
Click to collapse
---------- Post added at 11:51 AM ---------- Previous post was at 11:35 AM ----------
Ive actually been thinking of writing google about this whole frp thing. I dont see how they see they are empowered to lock devices out completely because of a different account being used to log in. I understand why they think they need to do it. But if the phone wasnt reported lost by the owner it should be considered that the owner is fully aware the phone is being used on a different account. Android is google but the phone purchased by the owner is not. Its up to the owner to decide if the pbones lost or stolen, not google. Sure this may have saved a few stolen phones, but every stolen pjone could be by their owners taking the responsible steps. Itd be like selling a car that is somehow linked to owner (fingerprint, insurance whatever) and dodge or gmc locking the car down because of it. Causes issues for people and not just the stolen ones. Isnt it generally wrong to punish an entire society because of a small group who break the rules? (Obamacare) There is PLENTY of data tracking and options for the owner of the phone to track their phone, lock it, wipe it and report it (also for google to know everything you do, everything) that google should not be able to or need to automatically lock a device because it was logged in with a different account UNLESS the OWNER reports it stolen. After all it is the owners phone. Unless its on contract then once its reported stolen the carrier can do what they need to for recovery. Google should release their grasp on society a little bit, stop default enable tracking our location, our voice searches, our internet searches, our lives unless we turn it on and shouldnt lock out OUR devices unless WE report it stolen. Google has got to be in with the military and i aint tryn to go conspiracy talks here but with everything that they are allowed to control and have, google earth images of things normally that would be thought questionable to see with stamps on the screen stating where the image is from (us navy etc.) I do not think the us military would allow aerial photos to be displayed by a company of their us military bsses unless it was the us military displaying them
droseofc said:
At this same time i had a zte warp 7 that was similar in setup but didnt have samsung nemore to test but should still work. Alls you may need to do is another reset because the keyboard should pull up.
The farthest i got into the phone itself is by resetting it through recovery, and when the phone first turns on it asks you if you want to enable accessibility. This is the only time it will ask so if you miss it u have to reset again. But click on accessibility and enable talkback and switch access. With switch access it will popup a tutorial u can skip or do. But with switch access on you can swipe down and to the right which will bring up a menu, i went to switch access settings and gesture control and customized the side double tap to recent apps. With the swipe down and to right i believe i clicked talkback settings and through that i was able to get to the phone settings. You have to get to app settings i cant remember exactly how but its only possible with switch access on. Once you do you can swipe down and to right to turn off switch access which will turn itself back on if u turn screen off and back on jst n case u need it to get back as its easier with it off once u get where u need, but can only get there with it on, sometimes depending on wat u click it'll take u back to setup wizard where its locked, turn screen off back on and doubletap or swipe down right to get recent apps or settings again. In the app settings i went through each one and enabled what i thought to help such as internet browser security settings allowing access to each. If you force stop and clear data on the setupwizard (green one I think) it will reenable the swipe down bar up top. I got as far as logging in google account using a chrome browser popup by clicking one of the terms and conditions links. Got notified of log in and everything but still locked out. Wouldnt install apps no matter what i tried.
---------- Post added at 11:51 AM ---------- Previous post was at 11:35 AM ----------
Ive actually been thinking of writing google about this whole frp thing. I dont see how they see they are empowered to lock devices out completely because of a different account being used to log in. I understand why they think they need to do it. But if the phone wasnt reported lost by the owner it should be considered that the owner is fully aware the phone is being used on a different account. Android is google but the phone purchased by the owner is not. Its up to the owner to decide if the pbones lost or stolen, not google. Sure this may have saved a few stolen phones, but every stolen pjone could be by their owners taking the responsible steps. Itd be like selling a car that is somehow linked to owner (fingerprint, insurance whatever) and dodge or gmc locking the car down because of it. Causes issues for people and not just the stolen ones. Isnt it generally wrong to punish an entire society because of a small group who break the rules? (Obamacare) There is PLENTY of data tracking and options for the owner of the phone to track their phone, lock it, wipe it and report it (also for google to know everything you do, everything) that google should not be able to or need to automatically lock a device because it was logged in with a different account UNLESS the OWNER reports it stolen. After all it is the owners phone. Unless its on contract then once its reported stolen the carrier can do what they need to for recovery. Google should release their grasp on society a little bit, stop default enable tracking our location, our voice searches, our internet searches, our lives unless we turn it on and shouldnt lock out OUR devices unless WE report it stolen. Google has got to be in with the military and i aint tryn to go conspiracy talks here but with everything that they are allowed to control and have, google earth images of things normally that would be thought questionable to see with stamps on the screen stating where the image is from (us navy etc.) I do not think the us military would allow aerial photos to be displayed by a company of their us military bsses unless it was the us military displaying them
Click to expand...
Click to collapse
Well I went through everything and no switch access at anytime at all..would I have better luck making my friend an "account" before getting to that sign in part I get "no keyboard in"? Or will it just tell me what its been telling me...Your app and functions or whatever have been revoked or not permittee some kinda thing like that.. I m guessing this may the very latest security patch and it shut down accessibility options keyboard options and getting past sign in options I get as far as google terms click on it and one click I have browser but when I try sign in from browser no keyboard and when I copy and paste I get sent back to main FRP screen again without my PIN I've entered being enabled as well
Sent from my SM-G900W8 using XDA-Developers mobile app
Its going to be near impossible to login without a keyboard popup and sorry about the switchback thing, must be a zte setting. Youve reset the phone using recovery? Power off, hold vol up, home and power until it turns on and let go should get u to recovery. Factory reset, delete cache reboot. Should take you to initial setup until you get to google login part where you will need to log in with same account used the first time phone was setup. Is the phone asking for a pin or does it say this phone has been reset in an unusual way or whatever and to log in with owner google account? If its just the pin screen and u havent reset it id maybe hold off as it may be easier to get through that than the google frp lock. If you have a mini usb to usb otg adapter you could plug adapter in phone and use a pc keyboard, or if u have a rooted phone laying around you can use usb keyboard app which when plugged in is the same as a keyboard. Its not going to help with any amount of accounts made if you have no way of typing them in at that log in screen. If you have factory reset and it does get to google login screen asking for first owner login and no keyboard popup there had to be an issue and i would download/redownload stock firmware and flash in odin because if its asking for a login it should definitely have a way fof entering that in. The only time ive had no keyboard popup is when i have set the default input method to something other then samsung keyboard like sixaxis controller which needs switched back to use keyboard
Cassybalfourjr said:
Well I went through everything and no switch access at anytime at all..would I have better luck making my friend an "account" before getting to that sign in part I get "no keyboard in"? Or will it just tell me what its been telling me...Your app and functions or whatever have been revoked or not permittee some kinda thing like that.. I m guessing this may the very latest security patch and it shut down accessibility options keyboard options and getting past sign in options I get as far as google terms click on it and one click I have browser but when I try sign in from browser no keyboard and when I copy and paste I get sent back to main FRP screen again without my PIN I've entered being enabled as well
Sent from my SM-G900W8 using XDA-Developers mobile app
Click to expand...
Click to collapse
---------- Post added at 12:27 PM ---------- Previous post was at 12:24 PM ----------
If u havent reset the phone and it is a pin and if u had enabled usb debugging prior to the phone being locked you may have options. If usb debugging is not enabled or if u did reset it options become slimmer. I have heard that not trying to login on the device for 72 hour will reset the account thing and allow a login. Not sure if it works, never had the patience.
---------- Post added at 12:43 PM ---------- Previous post was at 12:27 PM ----------
I found by trying whatever i could theres some way of getting to the settings itself. Easiest was by getting the google app to pull up and searching settings. I did this by getting to the app settings from talkback options and finding someway of getting to its app settings and then clicking menu and going to all apps. From there you could find keyboard and make sure its allowed access to each option. If google app doesnt list settings as a option you will have to make sure in app settings you enable access to phone/storage and then it should. I clicked basically every option available in every route there was and some was dead end, some would get into areas not available before. If your issue is keyboard id try to get to its settings by trying everyroute u can and enabling access for it and every application you think may be helpful in getting where you need. I found when its locked out nearly every app has no access to any features by default so for instance keyboard may not have access to phone and wont popup when needed. You will need to show system apps once in the app settings by clicking menu up top. You may also want to go to apps that can change system settings and enable ones that appear useable. If u get there u can also force stop setupwizard and clear data which will allow bar up top to be pulled down making getting there a whole lot easier. Dont get hopes up, i did all of this and in the end gave up. Without being able to install apps its kind of hard to bypass. May have been a simple enable of whatever installs apps to allowing access but didnt find. The last thing i did try which may have worked was getting another phone and turn on hotspot and on locked phone connecting to it at wifi screen and as soon as it goes to checking connection screen turning off the hotspot and phone should go to screen asking for first and last name. U could do this with wifi just easier to turn off on hotspot. It may take a few tries and probably will. 9/10 times itll say there was an error and go back to wifi setup. I was able to enter name and setup a lock for the screen. Didnt venture further. Also when i did get to settings and went to backup and reset clicking reset didnt do anything. This is the way to reset without getting frp locked out but the option was disabled.
I bought the phone I didn't set up anything BC I was charging the phone until I would be back later on that night...babysitter as smart as she is signs in with her account BC its a brand new phone that MAKES you sign in to get the most as she put it..SMH..any who she replaced my phone I the box where I left it didnt sign out properly so my SON showed her how a Hard Reset is done!! Yeah you get the picture right ?! So that's my brand new phone with a DAMN FRP lock on it..oh yeah it dont matter if you've got the receipt or not anymore they say..???? Isn't that the whole reason behind a Sales Receipt?? Not gthe whole reason but yeah...long story short I have an Awesomely Rooted KLTE device and I was wondering where I may be able to find this app? And I do really appreciate your time and effort into helping me..when ur so stumped all you come up with is a different spot to get stumped again?
Sent from my SM-G900W8 using XDA-Developers mobile app
Never mind found a way in thanks anyways
Sent from my SM-G900W8 using XDA-Developers mobile app
Cassybalfourjr said:
I have had my J3 almost two weeks I'm almost sure it has the latest security patch and I can not get a keyboard to pop up I even went as far as Copying Pasting almost a full account info registration but was short one # to complete it it has One # A 8..well Ive exhaustied most steps I'm hoping today I can finally use MY less then two week old FRP locked J320W8 LOL..any help would be great but yes I get stuck without keyboard
Sent from my SM-G900W8 using XDA-Developers mobile app
Click to expand...
Click to collapse
frp reset is possible, i used program chimera tool. what i need is a twrp for this model w8, or a root method, or an older firmware. if you can share any of these please do. Thanks
bilalwiggles said:
frp reset is possible, i used program chimera tool. what i need is a twrp for this model w8, or a root method, or an older firmware. if you can share any of these please do. Thanks
Click to expand...
Click to collapse
I've used real term for this one and did an exploit I'm not so sure if they've figured it out yet but Novembers security patch is harder too can't wait to try December's
Sent From An Awesome S5
So nearly reading the complete thread, it didn't help me out.?.
My problem is.
A couple of months my s7 edge panel broke, so today i repaired it and saw that it had a pattern lock. So i forgot completely and i thought something would help me ro bypass it without losing the data but nothing helped.
1. I don't remember the pattern
2. Usb debugging is disabled.
3. Cant install twrp because of frp lock
4. The Google account password is already changed so i can't use ADM.
5. There is no mobile data or wifi enabling.
Now help me out plz.
If anyone can ask for further to research i can tell.
Thanks
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
I had the same problem and from my understanding all the methods are blocked now I'm trying to find out if theres a way that i just havent figured out yet i've book marked your question and will keep checking back to see if you have had any help
I know it is a tricky subject as I could be in possession of a stolen phone in which case I am rightly being locked out of it but I have the receipt to prove I have purchased it which I am willing to show to anybody who might know a way around it.
Have you tried putting it in download mode then using emergency recovery on Smart Switch?
Yes tried that earlier. Smart Switch doesn't recognise it. Just stays on the screen telling me to connect the phone even though I already have. When I plug the phone into the laptop it says the USB device (my phone) has malfunctioned and Windows doesn't recognise it. I have tried ODIN and that doesn't recognise the phone either as it isn't being given a COM number by Windows. Guess I will have to take it back to the Samsung Support Centre as I paid them to get the phone working and he said the price quoted was to get it fully working. If the USB isn't working then they can repair it!
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Ditto as him
Proof of ownership, otherwise identical to dec update. whatever you think, need the help..thanks
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
I've just unlocked a S5 Neo.
I flashed the very first firmware version (5.1.1)
FRP lock still there BUT I could now use the side sync hack or samsung unlock APK on OTG cable.
Then flashed the latest 6.0.1 version
Did you manage to unlock it?
I have the same problem
Any good current methods for this
uninstall all drivers related and kies. Then install kies and needed drivers. See if you can connect via download mode now.
godders3906 said:
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
Click to expand...
Click to collapse
Try this OP.
I Found A Way To Remove FRP that dosen't trip any trips
thundastruck said:
Try this OP.
Click to expand...
Click to collapse
Have a look at my post here... How To Reset FRP (Nearly All Fones From Android 6.x.x to 7.x.x, No Trips, Flash counter inciment, Knox, Still Mode = Official, Warenty 0 (0x0000) (Still working 16 June 2017)
You see, im not all that good with programming APK files, Dalvik VM, Obex,ect, but Linux I'm your man so i figured where is the email/pass info held and is there a switch to keep it on off, ends up one of the easiest hacks i've ever done, no complicates hashed/salted double coded switch, or hard wired switch,
just a very small partition that when or if you have any google account info stored in it you get locked out till you enter the exact same info, so i just dd,d the partition after taking a backup of course lol (; then when the fone booted to download mode i noted FRP=OFF so i flashed the stock bootloader to let the fone boot all the way to video mode and YES!!! it thought it was a new fone never been used before then i check the switches/trips KNOX , device status = official, to test i just made a new google account on the spot on the phone filled all the [email protected] in then voila its working, calls, all menu items ok, official all knox fine, just the way it was when i first got it, except obviously I've upgraded to v7, hopefully this works for you, please dont use or talk about illegall activity with this, or using it for profit, it's agift I gave you's for free so i want it to stay that way, all i want is a thanks, and a beer, lol, no but seriously, when the guy that invented the hammer to ease the effort of pussing nails into wood with you hands, never got hassle about murders with them, tha fact the could be used to rob banks, rob people, damage things, smash up shops, etc so... think about it, all i done was make a tool to help people too. theres litteraly millions of exploits, including android based ones out there just now check, https://www.exploit-db.com/ , OWASP_Vulnerable_Web_Applications_Directory_Project , http://www.exploit-db.com/ , http://www.blackploit.com/ , packetstorm cve etc etc. #
This is a tool to help people how when they first got there fone, and just filled in any old stuff to get into the fun part of the fone. ie "you cannot use [email protected],com as it already in use how about [email protected],com then the password, use one lower case, one higher case, one number , one symbol, more than 12 letters but less than 20, don't use anything you talk about, your name dob etc etc etc , so most people just pick the random one google pumps out and tries random passwords till one goes through, "I've seen this done a few times with my own eyes and had to stop them and explain and this was b4 FRP" Also if you change one letter in your google password, Factory reset your fone, your locked out if the fone never got the change in time, try it, Anyways if people use this for illegal purposes its there evilness there using not mine, there just using my tool as well as the thousand of others in the arsonry, even the OS check out "kali linux OS", "Parrot OS" "Blackbuntu OS"," BlackArch Linux" Also say you code a program to check hashes at a faster rate to speed up logins etc, a hacker will use it to check stolen passwd lists faster, if a faster CPU is made, the first thing a hacker thinks of is how many words/letters it can do a second so they can bruteforce the wifi key of the local bank, hospital etc.... so?
tried EVERYTHING ....
I have the USCellular G935R4 .... S#iiiit , like I've even gotten to the actual HOMESCREEN , but no matter what I do it wont do it.. i can access just about any app and the settings accurately every single time within seconds-mins, even tried flashing it, even had FULL access and control over it using sidesync, and i tried rooting it from oneclickroot on pc but thennnn knox trips and won't let me enable developer options.... And got the error with "sign in using email and password" on quick shortcut maker , PLUS tried everything to fix the error by reinstalling google account manager , etc ...
But NOTHING ...
If ANYONE has any idea how to successfully do get into it , Pplleasee let me know!
???
Seriously ,
I swear , I'll even pay someone ...
Try flashing the phone to the latest MM via odin and try bypassing. I tried it on my G** da** S6 with may 2017 patch. Dowgraded into latest MM and tried different bypass and it worked.
any help in 2020
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
cany help in 2020 S7 Att frp removal PLEASE