This rom works well except for the following: (any help is appreciated, while waiting for Lineage os 13)
Wi-Fi will not turn on, so I have been forced to use LTE, not that I'm worried about data usage. Though my Fiber at home is much faster.
Apps fail to download or fail to update. I'm guessing this might have to do with mass use of LTE data restrictions on trying to update.
@jpenberthy, ive only had this phone for a month im building a custom stock rom its not my first , but its heavily tweaked and modded i also had troubles when installing the other roms so im at it doin it again heres the link check it out https://forum.xda-developers.com/showthread.php?t=3584649
Sent from my SM-J700P using Tapatalk
Related
I have a Samsung Infuse 4G on T-Mobile unlimited prepaid plan. I rooted the phone back when I had AT&T so I could test it on my girlfriend's T-Mobile plan just to make sure it worked.
Since then I've installed 2 custom ROMs - Darky's 10.4 and ZEUS Build 6. When on Darky's, I could get wi-fi calling using asianbobo's MOD, but ran into a lot of issues. Mainly I lost Bluetooth and wi-fi became spotty, plus Darky's sucked my battery dry in less than a day with minimal usage.
So after reading several forums and developing a plan of action, I used Odin 1.7 to go back to stock, re-rooted with SuperOneClick, then used Odin 1.7 again to install the Odin Cummunity Kernel so I could get beyond the CWM 3e recovery issue I was having (apparently the latest CWM or the latest SuperOneClick cause issues with using the old replacement 3e recovery method for enabling unsigned ROM installation, so I needed one that had the CWM update pre-set).
So where I am now is running ZEUS Build 6 with all the apps I previously had installed. I still have to restore a few things (like importing settings and such for certain apps), but I'm happy thus far with my choice. However, I would like to get Wi-fi calling back. I have the asianbobo MODs still - the Darky one, the ZEUS one, and the AnyRom one. However, before I proceed, I'd like to know if the ZEUS MOD will work with Build 6 (says it's for ZEUS Build 5 but I'm wondering if anyone has tried it on Build 6 or if it's just safer to use the AnyRom and modify the build.prop instead).
Any help with this, or any feedback from anyone who has tried this, would be much appreciated.
For anyone in the US having wi-fi issues with ZEUS, try flashing the CWM-UCKL2 modem found here.
Saved me from wanting to throw my phone.
No longer own this phone, and no longer have a copy of the rom so this is no longer being developed.
Thanks to @shifattk and @FitAmp for the overclock
Thanks to @Restl3ss, who is working on a rooted and overclocked, otherwise bone stock ROM
Thanks to @atmu5fear, who made the first flashable rom for the S730M, I based my Rom off your original release.
changes I made from the stock 4.04 image
Rooted
BusyBox
Overclocked to 1000mhz
Nova Launcher
Default Ringtone: Crank
Disabled power on and power off boot sounds
Bloat Removed
Theme Changes
Zipaligned
Replaced Samsung keyboard with the google keyboard (much better IMHO)
Stable
Working and tested. Tested on a S730M as well as a S730G
Flashing instructions:
1. Use CWM 6.0.3.1 Get it here https://docs.google.com/file/d/0B1BxFtN0QItNUExLMHBWT1loQjg/edit?usp=sharing, flash with Odin)
2. Make a backup, if things go wrong for you, you cause use the backup to restore your phone's original firmware.
3. WIPE DATA/CACHE
4. Flash
5. Wipe Dalvik.
6. Reboot
NOTE: I can not and will not be responsible for any damage this rom could potentially cause on your phone, http://en.wikipedia.org/wiki/Caveat_emptor
Download Version 1.0 here
Good to see someone still working on this device
Sent from my HTC One using Tapatalk
FitAmp said:
Good to see someone still working on this device
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
It's a nifty little phone. I personally think it's better than a Nexus S but just suffers from the typical Samsung pump and dump routine where they sold all their inventory to the carriers then stopped supporting it with any updates.
Good job! I have 3 versions of the stock ROM available for this device as well, may have been more appropriate for a base, there's stock, stock + root + Busybox, stock + root + Busybox + overclock. Find them here
http://forum.xda-developers.com/showthread.php?t=2677332
Sent from my SGH-T989D using XDA Premium 4 mobile app
r740c
Will these ROMS work with the Cricket version?
kadeleblanc said:
Will these ROMS work with the Cricket version?
Click to expand...
Click to collapse
If the cricket model you have is a GSM version then yes it should so long as its a S730M or S730G. If its a CDMA model then no.
CDMA
doctor_evil said:
If the cricket model you have is a GSM version then yes it should so long as its a S730M or S730G. If its a CDMA model then no.
Click to expand...
Click to collapse
It doesnt take a sim card so no GSM. Is there any other ROMs that you would know of? We are kind of stuck out with this model, it kinda sucks lol.
kadeleblanc said:
It doesnt take a sim card so no GSM. Is there any other ROMs that you would know of? We are kind of stuck out with this model, it kinda sucks lol.
Click to expand...
Click to collapse
You may be able to use the same CWM recovery on that model,
you should be able to probably use the same kernel to overclock your model too, and you can probably use the kitchen app we used to cook these different version roms for the 730M and 730G models to do your own custom rom, just remember before you start working, to do a full nandroid backup of the current rom so you can restore it back to the original (mostly stock except for the cwm recovery) firmware if you need to later on.
By any chance this will unlock it or do you know a way for me to get the unlock using hex?
Thanks to doctor evil for this ROM I was able to flash my phone but not before removing more apps (bell apps and oothers ).
I was wondering if anyone was successful in unlocking the tethering? Tried a few things out there and the best I could get was Bluetooth tethering with foxfi.
And it works!
@doctor_evil: I flashed your set after having played with @atmu5fear's version (http://forum.xda-developers.com/showthread.php?t=2673097). I like them both very much and am still looking which one I will keep. I have not wiped data/cache (i.e. Factory Reset) before overlaying your version over @atmu5fear's one, and it did not hurt. I noticed the following:
Flashing your ROM did not again trip the ROM counter after applying the triangleaway script after @atmu5fear's ROM load (it did go off then).
When having a SIM in the S730M and after putting in the phone unlock password, the keyboard stays on top (this does not happen when no SIM is present)
My Battery-drain problem when having the phone powered fully off with a SIM installed is still there. Probably need to await a cooked custom ROM for this to be solved
The triangleaway script for the S730M can be found at http://forum.xda-developers.com/showthread.php?t=2420184
The Battery-Drain S730M issue has been noticed by quite a few people (TELUS and BELL, both in Canada), and is unexplainable. When the phone is on (with SIM installed), power usage is normal, but when you power off the phone (with SIM still installed) the power-drain goes up dramatically (draining the battery completely within a few hours). When the SIM is removed, or when the battery is removed there is no abnormal drain perceived. The other thing is, that, when the device, with SIM and battery installed, is powered off, both the battery area and the SIM area get warm (not really hot), indicating SIM activity WHILE THE DEVICE IS OFF... Very odd. I am hoping that a new KK custom ROM would fix this issue as both 'custom' 4.0.4 ROMS I have tried now show the same issue, indicating it is either a hardware or a 4.0.4 implementation issue...
I am sorry I never responded back to you. I had my Cygwin install with my kitchen build environment running on a SSD hard drive with my OS and the drive crapped out on me and had to be sent in for a RMA. I had a easus todo workstation backup of my drive I was able to restore, but the backup wasn't current so I lost my kitchen environment. I never tried to set it up again as I had hoped that someone would have ported Cyanogenmod to the phone.
I may give it a try again as I just setup a vmware ESX host server here at home and I can allocate multiple cores and plenty of ram to the linux Virtual Machine I created on it once I figure out the best build environment and how to actually go about building CM successfully. Anyone know of a porting cyanogenmod for dummies guide I can use? LOL
So, I'm buying this to replace my evo 4g and I was wondering how I would go about using a custom ROM for this and having the apns and data working correctly.
I plan to activate it on Ting.
To be a bit clearer, I want to use a custom ROM and I want to be sure that it'll work. So first, can anyone on Ting confirm that they're running a custom ROM (preferably KitKat) with no problems?
And I assume I'd have to activate the phone first, then install a custom ROM. Would I have any problems doing that? Would the apns be messed up? Or should everything be fine as long as I activate the phone and update everything on stock before installing a ROM? Reason I ask is because I know some Roms don't allow the *#*# thing needed to activate a phone on a new network.
Thanks!
I am using mine on Ting. I had used my first Q as unrooted stock JB, which worked pretty well for a year, but then it reached a near--bricked state where it wouldn't boot past the yellow Sprint screen. I couldn't resolve this in a timely fashion, so wound up buying a second Q which runs stock ICS, but failed to download the stock JB update.
In the meantime, I unlocked both phones' bootloaders, and tried a few kItkat ROMs on my original phone before settling on CM 10.2, which is a JB ROM. I then switched my Ting activation (back) to this phone. The lack of #*# commands isn't really a problem with respect to re-activation, but it is a problem with respect to PRLs and (perhaps) APNs. I recommend Ting activation and a PRL update prior to installing your custom ROM.
Like others, I would like to learn about a stable kitkat ROM where bluetooth, wifi, and phone data/sms/calling all work reliably. My other primary requirement is the ability to play DRM'd downloaded Amazon Prime Music, which didn't work on the kitkat ROMs I tried, but does work on my JB ROM.
Sent from my XT897 using Tapatalk
hey, I have tried several things but havnt got anything to work. I got USB tethering working with foxfi but I would prefer wifi tethering. I have customer recovery and i am rooted. What would you guys suggest. Thanks
There was a thread floating around here somewhere concerning Galaxy Tools. Look that up. It should enable maybe wifi tethering.
Wondering the same thing
My phone was unusable fit like 3 weeks, it started working again so I'm scared to try putting another custom rom on it. I was also recommended not to buy some people on this site that i believe are much smarter than me! I did find out that I'm rooted, also have Philz custom recovery on the phone. So I've been looking for a way to get my Hotspot back, nothing I've tried has worked... any help is greatly appreciated! :good:
youre on OD3 and cannot go back to an earlier version, so unless you can find an app, or when a ROM comes out with it built in, youre kinda stuck. Not sure if youre aware, but the OA6 and OD3 are basebands and the ROMs you have available to you are based upon what baseband youre on, and apparently once you go to OD3, you cant revert
http://forum.xda-developers.com/note-4-sprint/general/lollipop-hotspot-root-flashing-t3048163
I've searched the forums beforehand, so if someone finds something I missed, I apologize.
I have a Straight-Talk Samsung Galaxy S5.
Model Number from within Android says SM-S902L
Model Number on the battery cover says SM-G900P (B)
Currently running 4.4.2
I was wondering if someone would be able to show me how to root this, install a custom recovery, and tell me which roms I can install. The two different model numbers are confusing me.
EDIT: I rooted via CF Auto root using the sprint ktle .tar. Does this mean that most SM-G900P roms will work? I'm still confused on how to get from 4.4.2 to Android 5 or 6, if it's even possible.
Thank you very much.
i put a version of MOAR built for the vzw G900v on a 902L a few mos ago and its working fine. Just get TWRP on it and you can flash pretty much any snapdragon based ROM on it barring incompatible kernels and so forth
I got TWRP installed and it works fine, made sure the first thing I did was back everything up. It's just that, every post I've seen, the OP's Straight Talk S5 was just a rebranded Verizon S5, while mine is a rebranded Sprint S5. I just want to be certain flashing a Verizon ROM won't bork my "Sprint" phone. I can't find APN settings or anything. So I can't even copy them to change them later. So should I only try Sprint ROMs?
Tats the weird thing about the 902L, it says g900p on it, but i had to flash the vzw version of MOAR instead of the G900Ps version for it to work. But its seriously hard to bork your phone in such a manner that Odin cant fix it. I cant tell you how many times ive tried to install a ROM that was made for the g900p on my g900p and it failed, so, i just flashed MOAR in TWRP again and viola. Also, the backup thing isnt as vital as some make it seem if you have the tarball for the phone you own. Sure, it makes it easy to restore from an eff-up if you dont have your computer handy, but its just so unnecessary to make a backup of your original setup, just have a backup of a known to be fully working setup. Anyways, give vzw's MOAR a try. Its a great ROM and if anything goews wrong, just odin your phones original tarball back on it and all will be back to stock. You have to flash TWRP after the phones OG tarball tho
I don't have my phones OG tar. And is there a step I have to take before installing M.O.A.R or can I just jump from 4.x.x to 6.x.x?
im not aware of any 6.x.x ROMs that are compatible. MOAR is 5.0. Are you trying to get an app working that isnt compatible with 4.x.x? Like the car synch app? And to flash MOAR, just download it, wipe cache, dalvik and system in TWRP and install MOAR. Firstly tho, get the tarball from sammobile.com/firmwares. Its a super slow d/l, but youre gonna want to have it in case of a nuclear bomb restore necessity (not a likely scenario, but youre gonna want it. I have it and can host it for you on android file host later once i get home)
did you get the tarball for the 902L?
i ended up redownloading it from sammobile.com/firmwares. Took about 90 min because of their horrendous download speeds for non premium members, but i have 7 TB of storage, so im not wasting any space just having it since i have a G900P LoL (well, 2 of em along with the bovy of other phones i have for whatever reason i still keep them)
Thank you so much!, and Happy Thanksgiving if you celebrate. I've installed MOAR and the only thing I did was change the colors of the status bar icons and now all the phone does is boot to lockscreen then cycle back to boot animation. Something I did?
RRSJ392 said:
Thank you so much!, and Happy Thanksgiving if you celebrate. I've installed MOAR and the only thing I did was change the colors of the status bar icons and now all the phone does is boot to lockscreen then cycle back to boot animation. Something I did?
Click to expand...
Click to collapse
wipe all the appropriate caches before installing? and where did you get the version of MOAR youre using? Also happy thanksgiving to you too!
Ironically, I want to go back to 4.X.X for compatibility issues. Do I just wipe Dalvik and Cache and load OG tar through odin? I cant locate OG tar for 902L :/