Blissrom, MIUI, FuntouchOS for Lenovo Vibe C / A2020a40 - General Topics

=========================
=========================
Please follow the step by step :
Developer Mode -> Root -> UBL -> TWRP -> Install ROM -> GAPPS -> Xposed
=========================
Enable Developer Mode :
Setting
About Devices
Press 7x 'Build Number'
Go to the Settings
Developer Options
Turn On
Check the 'OEM Unlocking' and 'Android Debugging'
=========================
Root Phone :
Install 'Kingroot.apk'
If there is a warning when installed select detailed 'continue' / 'I know'
Open the app
Make sure to have a minimum quota of 20MB and a strong signal
Select 'Check for root' and 'Roots now'
Wait until the process is complete
Do not be afraid if stuck long to reboot or fail, remove battery, try again 'Roots now' and make sure that the signal is strong
=========================
Unlock Bootloader (UBL) :
Extract 'A2020a40_unlock_7M.zip'
Make sure the HP already connected to the PC
Open (click 2x) 'Unlock_Bootloader.bat'
Wait until the process is complete
=========================
To install TWRP by Ivan :
Install 'Flashify.apk'
Open the application and select 'Install zip'
Find the files 'TWRP by Ivan.zip'
Install then 'Reboot Recovery' / volume up + power
=========================
To install TWRP-1 :
Extract 'TWRP-1.zip'
Make sure the HP already UBL, ADB is active and connected to the PC
Open (click 2x) 'Flash-TWRP.bat'
'Enter' to continue
If it is already, HP will boot to the system
Then open (click 2x) 'Run-TWRP.bat'
If you have entered into TWRP will speak Russian, way instead select menu above right 'swipe' then found English
=========================
To install Custom ROM Blissrom :
Make sure that backing up critical data
Entered into TWRP Recovery Mode (long press the power button and volume up)
At the beginning will speak Russian, way instead select menu above right 'swipe' then found English to change the language to English
If there is no display like the number 3 can go ahead
Wipe / Format Clear
Copy 'BlissROM v6.4.zip' from PC to HP with USB cable or SDCard
Then go back to the main menu and Install
Find 'BlissROM v6.4.zip' which was then select
Do not check 'signature verification Zip'
Install / Swipe and wait until completed then 'reboot system'
=========================
For GApps via app :
Install 'OpenGApps.apk'
Open the app and follow the instructions
It is recommended select the package 'Pico' if you want Google minimalistic app (it is definitely there PlayStore)
Download and Install via app
=========================
For GApps via Recovery / TWRP :
[
Select the appropriate HP and ROM (for Lenovo Vibe C definitely Platform ARM, then adjust the OS ROM is installed, select 'Pico')
Download and install through Recovery (TWRP / CWM)
If you fail / error during install, or can not be opened PlayStore please use the first way
=========================
For Installer xposed :
Install 'XposedInstaller.apk'
Open the app
In the Framework menu click 'Update/Install' under the red box
Then restart the phone
=========================
After installing this ROM Bliss, HP will become the 'Micromax Q415' can be changed build.prop in Kernel Application Adiutor, can find how at Google.
=========================

daffaalam said:
=========================
=========================
Please follow the step by step :
Developer Mode -> Root -> UBL -> TWRP -> Install ROM -> GAPPS -> Xposed
=========================
Enable Developer Mode :
Setting
About Devices
Press 7x 'Build Number'
Go to the Settings
Developer Options
Turn On
Check the 'OEM Unlocking' and 'Android Debugging'
=========================
Root Phone :
Install 'Kingroot.apk'
If there is a warning when installed select detailed 'continue' / 'I know'
Open the app
Make sure to have a minimum quota of 20MB and a strong signal
Select 'Check for root' and 'Roots now'
Wait until the process is complete
Do not be afraid if stuck long to reboot or fail, remove battery, try again 'Roots now' and make sure that the signal is strong
=========================
Unlock Bootloader (UBL) :
Extract 'A2020a40_unlock_7M.zip'
Make sure the HP already connected to the PC
Open (click 2x) 'Unlock_Bootloader.bat'
Wait until the process is complete
=========================
To install TWRP by Ivan :
Install 'Flashify.apk'
Open the application and select 'Install zip'
Find the files 'TWRP by Ivan.zip'
Install then 'Reboot Recovery' / volume up + power
=========================
To install TWRP-1 :
Extract 'TWRP-1.zip'
Make sure the HP already UBL, ADB is active and connected to the PC
Open (click 2x) 'Flash-TWRP.bat'
'Enter' to continue
If it is already, HP will boot to the system
Then open (click 2x) 'Run-TWRP.bat'
If you have entered into TWRP will speak Russian, way instead select menu above right 'swipe' then found English
=========================
To install Custom ROM Blissrom :
Make sure that backing up critical data
Entered into TWRP Recovery Mode (long press the power button and volume up)
At the beginning will speak Russian, way instead select menu above right 'swipe' then found English to change the language to English
If there is no display like the number 3 can go ahead
Wipe / Format Clear
Copy 'BlissROM v6.4.zip' from PC to HP with USB cable or SDCard
Then go back to the main menu and Install
Find 'BlissROM v6.4.zip' which was then select
Do not check 'signature verification Zip'
Install / Swipe and wait until completed then 'reboot system'
=========================
For GApps via app :
Install 'OpenGApps.apk'
Open the app and follow the instructions
It is recommended select the package 'Pico' if you want Google minimalistic app (it is definitely there PlayStore)
Download and Install via app
=========================
For GApps via Recovery / TWRP :
[
Select the appropriate HP and ROM (for Lenovo Vibe C definitely Platform ARM, then adjust the OS ROM is installed, select 'Pico')
Download and install through Recovery (TWRP / CWM)
If you fail / error during install, or can not be opened PlayStore please use the first way
=========================
For Installer xposed :
Install 'XposedInstaller.apk'
Open the app
In the Framework menu click 'Update/Install' under the red box
Then restart the phone
=========================
After installing this ROM Bliss, HP will become the 'Micromax Q415' can be changed build.prop in Kernel Application Adiutor, can find how at Google.
=========================
Click to expand...
Click to collapse
Thread closed PPC/Malicous links and Warez
Regards
Sawdoctor

Related

A2107A-H Firmware update, Custom Rom and CWM Recovery (calling feature - unlocked)

Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)​
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse
Reupload Please
Please reupload the tools section.
Thank you in advance
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
pemergency said:
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
Click to expand...
Click to collapse
Hi there,
Can you try http://uploaded.net/ ?
I used it for many files so far and seems to work OK.
Thank you.
re
yesterday on Chinese side get everything.
flashed - rom (lots of Chinese garbage) does - only Chinese and English.
English also very buggy - phone goes.
sorry ... google translator
.................................................
Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)​
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse
german language ?
Yes for settings and all stock app. All apps added by myself are not translated
Sent from my GT-N7000 using xda app-developers app
brief assessment of the costum rom "pemergency" mod = which must be paid
- Setup / flash -> OK
- IMEI must be corrected manually by terminal as tool does not work
- Constant error message "simcard failed" (slot2) although only 1 slot has
- "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
- Spoke only Russian / English / chinese integrated as standart
- Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
mrbonsen said:
brief assessment of the costum rom "pemergency" mod = which must be paid
a) Setup / flash -> OK
b) IMEI must be corrected manually by terminal as tool does not work
c) Constant error message "simcard failed" (slot2) although only 1 slot has
d) "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
e) Spoke only Russian / English / chinese integrated as standart
f) Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
Click to expand...
Click to collapse
a) no comment
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
c) This Rom is for A2107a-h which is a 2 slots device, so I dont see a problem on this point
d) I said as this is modiffication, I decide to remove a stock launcher, you can install any other one of your choice
e) I also answered to your question as for german language only original apps are translated and the main system, on other threeead is clearlly said as this rom using more locale 2 for translation.
f) and as a last one, why you expecting anything original in a modiffied ROM?
I stoping to doing anything with this ROM for a simple reason:
- FREE ROM = 900 downloads,
- PAID ROM FOR £5 = 5 downloads - embarrassing
Why?
and one more thing...
My correspondence with mrbonsen, when I tried to help him out with the installation process is also interesting. About 10 emails with instructions to mrbonsen and also 10 emails of insults from mrbonsen. That means something....
So conclusion is simply... go back to your original firmware and I will give you your £5 back
and also 10 emails of insults from mrbonsen.
Click to expand...
Click to collapse
I would, at least at three mail the conversation ended :victory:
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
Click to expand...
Click to collapse
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
mrbonsen said:
I would, at least at three mail the conversation ended :victory:
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
Click to expand...
Click to collapse
Hehe, ok, this is all my fault, I just should expecting as this ROM could be installed by a persona like you, my bad
BTW I using this ROM from a weak or more and have no problem at all. Waiting for comment from other users ...
Sent from my IdeaTab A2107A-H using XDA Premium HD app
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
pemergency said:
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Click to expand...
Click to collapse
You did a great job and 900 downloads are impressive. i have a A2107A-H 1GHz 1GB RAM 16GB Flash - how come nobody is providing feedback or helping out in this development? Could there be a way to update.zip just the standard factory ROM? maybe that could be possible by doing a diff on the chinese and european source code? sorry i'm just a lamer looking to help out. any news from lenovo developers on the 4.1 release?
today is your cwm rom accessible for download for trial?
Ofcourse it is possible to get back the standard ROM just ask someone who still have a European ROM to do a copy by nandroid backup and you can restore this by centeCWM. So after that you will have a stock ROM with CWM but without calling feature.
I nearly finish another ROM with calling feature but this will be based on Russian ROM. I just need to get European system backup to do it same thing with European ROM.
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Password for CWM Firmware : xdadevpemergency
NEW MANUAL AND FILES (discontinued project)
For both option's copy "clockworkmode/backup/modpemergency" folder to sdcard internal or external!!!
OPTION 1: For CWM Recovery devices:
Downloads:
Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your internal storage or external sdcard.
It should looks like this one:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore from internal sdcard" or "advanced restore" in a case of using external card
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advanced/wipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
OPTION 2: For non CWM recovery devices
Copy clockworkmode/backup/modpemergency to your external card, it should looks like this:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
downloads:
1. CWM Recovery https://hotfile.com/dl/182805290/fe4ac19/CWM_Firmware.zip.html
2. Flash Tools https://hotfile.com/dl/182820835/8dd3c06/Tools.rar.html
3. New Flash Tool without error (replacement for the one from Tools.rar package https://hotfile.com/dl/183057140/692cbbb/SP_MDT_src_v3.1216.02_A2012.05.22.zip.html
4. Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
5. USB Driver
For windows xp https://hotfile.com/dl/182950442/360c725/USB_VCOM_Driver.zip.html
For windows seven https://hotfile.com/dl/182950251/0c9ee3d/usb_driver.zip.html
Install CWM Recovery:
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
The "Data source file" and "Da file name" should have assigned path from SP_MDT_src_v3.1216.02_A2012.05.22 folder. If is not assigned properly please do the folowing steps:
- File/Open Download Agent File and choose file MTK_DATABASE.mdb from SP_MDT_src_v3.1216.02_A2012.05.22 folder
and
- Factory database/Setup data source file and choose file MTK_AllInOne_DA.bin from SP_MDT_src_v3.1216.02_A2012.05.22 folder
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Install pemergency custom ROM
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your external sdcard.
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore"
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advancedwipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
After that sometimes it is nessesary to repair IMEI
IMEI repair
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
Good Luck...
NEW ROM on the way. Will be posted on the end of this week.
- oryginal multilanguage for most of languages like in a stock european ROM (not more locale)
- fixed most bugs from the previous pemergency mod
- stock launcher
- Battery life incresed to 30% more then oryginal ROM
- Battery status in a settings
- Downloading all apps from google store (no incompatibility problem)
- Quick Boot
- Better sim management
- All options for synchronisation, like in oryginal european stock ROM
and many many more...
Finished in 98%
Anyone would like to pay for this £5?
Free update for everyone who bought the previous version!!!
ok, I certainly update :good:
may inform some user from the German forum.
pretty much at the end of the page
http://www.android-hilfe.de/lenovo-ideapad-a2-forum/341347-a2107a-root-cwm-custom-rom-5.html

[GUIDE] How to Root SuperSU via TWRP if CF-Auto-Root really does not work for you

Overview​- Disclaimer -
- Tested on -
- Deep Cleaning -
- How to flash TWRP and enable Root with SuperSU -
- Download sources -
- Combos explained -
- Unlock bootloader and enable USB-debugging -​
DISCLAIMER​I AM NOT RESPONSIBLE IF YOU DAMAGE OR BRICK YOUR PHONE. THIS IS THE METHOD OF HOW I ROOTED MY S7 EDGE AND I WANTED TO SHARE THIS METHOD WITH YOU.
THE FOLLOWING GUIDE IS SUPPOSSED TO WORK FOR S7 PHONES WITH EXYNOS CHIP, ONLY!
IF NECESSARY: MAKE A BACKUP OF YOUR APPS/PICTURES/VIDEOS BEFORE YOU PROCEED.​
Tested on​[Device model] Galaxy s7 edge SM-G935F
[Codename] hero2lte
[Buildnumber] NRD90M.G935FXXS1DQHM (2017-08-30)
[Buildnumber] NRD90M.G935FXXU1DQJ1 (2017-11-15)
[Android] Android 7.0
[TWRP version] 3.1.1.0 (twrp-3.1.1-0-hero2lte.img.tar)
[SuperSu version] 2.82 (SR5-SuperSU-v2.82-SR5-20171001224502.zip)​
[Not Required] In case you need a Deep Cleaning (WATCH OUT! MIGHT BE RISKY!)​1. Download "Firmware" dedicated for your phone (unpack zip file!)
2. Connect phone to PC via USB cable
3. Enable "Auto Reboot", "Nand Erase" and "F. Reset Time"
4. Put BL/AP/CP/CSC firmware files to the right places without choosing "HOME_CSC..."
5. Press "Start"
Flashing TWRP and enable Root with SuperSU​[PC]
A. Download No-Verity-Opt-Encrypt zip file (=NVOE)
>> Place it to your phone's internal/external drive​B. Download SuperSu zip file
>> Place it to your phone's internal/external drive​[Phone]
Developer Options that have to be enabled before flashing anything:
C. OEM unlocking
D. USB debugging
[Phone]
1. Start "Download Mode"
>> Connect phone to PC via USB connector cable​[PC]
2. Run Odin3 as Administrator (by right-click on it)
>> Untick "Auto Reboot"
>> Let "F. Reset Time" be enabled​3. Load proper TWRP file into "AP"
4. Press "Start"
5. Wait until "PASS!" is appearing and progress bar on phone seems finished.
[Phone]
6. Force phone reboot (screen turns to black) {see "Combos explained"}
7. Once screen turned black immediately enter "Recovery mode"
>> "Keep System Read only?" Screen should appear​8. Swipe the arrow button at the bottom of the screen
9. Tap "Wipe" in main menu, tap "Format data". Type "Yes“ on your keyboard (first letter probably needs to be pressed twice or three times)
>> This will delete the data from all apps!​10. Tap "Back", "Install" and "Select Storage"
>> Depending on which NVOE/SuperSU file you want to choose you got to tap "Select Storage" (It is set to "Internal Storage" by default). Let's say you wanna have these files from your extermal SDcard being flashed: Select >> [Micro SDcard] entry​11. Find the NVOE file on your external SDcard, select it and swipe the arrow button to confirm flashing.
>> Flashing NVOE is required for the phone to boot correctly! ​12. Go back to main menu by tapping that house symbol at the navigation bar.
13. Tab "Reboot", "Recovery" and "Do not install"
>> It should reboot back to "Recovery mode" automatically​14. [optional] Check "Never show this screen during boot again" and swipe the arrow button
15. Swipe the arrow button
16. Tap "Install", find the SuperSU file and flash it by selecting and swiping the arrow button like you did with the NVOE file.
17. Check "Reboot after installation is complete"
>> It should reboot back to "Recovery mode" automatically​18. Tap "Do not install"
Done! Phone should reboot to Android OS after ~2-5 Minutes. Enjoy! :highfive:​
Note: USB-Debugging might be disabled again after this procedure.
Download sources (consider downloading the LATEST one!!!)​Firmware: https://www.sammobile.com/firmwares/
TWRP: https://twrp.me/Devices/
>> Type your device name and press "Enter"
>> Choose Download location and download latest "img.tar" file
>> Make sure this file has the correct device name. hero2lte = s7 EDGE |||||| herolte = s7​No-Verity-Opt-Encrypt: https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
SuperSu: https://download.chainfire.eu/supersu
Combos explained​Enter Download Mode: "Volume Down" + "Home" + "Power"
Force phone reboot: "Volume Down" + "Power"
Enter Recovery Mode: "Volume Up" + "Home" + "Power"
Developer Options: How to unlock bootloader and enable USB-debugging?​1. Launch the Settings app from the app drawer or the notifications shade.
2. Swipe all the way down and tap on "About device" and "Software info".
3. Tap "Build number" till you see a prompt on the display stating "You are now a developer".
5. Now go back to the main Settings page, scroll down once more and tap to "Developer Options".
6. Enable "OEM unlocking" (=Allow the bootloader to be unlocked) and scroll down to enable "USB-Debugging", as well.
-Hope- was the one who helped me rooting my phone with this guide. Thank you for your effort! :good:
https://forum.xda-developers.com/member.php?u=7827499
Feel free to join the unofficial XDA-Developers Live Chat Discord Server:
https://forum.xda-developers.com/general/general/unofficial-xda-developers-unofficial-t3661056
✓ Friendly Chat ✓ Technical Support ✓ Discussing about android latest news ✓ Gathered most used tools in one place ✓ More to come - suggestions are welcomed​
I applaud your detailed description of how to do things. I spend hours last month to root my phone until i realized that almost all guides were flawed... One comment. You can optimize the description for easier reading cause there is a lot of excess info but other than that Well Done! This topic should be pinned somewhere
PS: Works fine with Magisk as well btw
Hi, can i use this guide I'm on Nov Security Patch. Please advice because last time I was stuck at Samsung breathing Logo trying to root via CF Auto root method. Thanks in advance.:good:
nickomy said:
Hi, can i use this guide I'm on Nov Security Patch. Please advice because last time I was stuck at Samsung breathing Logo trying to root via CF Auto root method. Thanks in advance.:good:
Click to expand...
Click to collapse
As it happens, I am already on November Security Patch G935FXXU1DQJ1 (2017-11-15) and everything went fine with this guide^^ Please be aware that there is a newer build available for december!!!
ShaMana999 said:
I applaud your detailed description of how to do things. I spend hours last month to root my phone until i realized that almost all guides were flawed... One comment. You can optimize the description for easier reading cause there is a lot of excess info but other than that Well Done! This topic should be pinned somewhere
PS: Works fine with Magisk as well btw
Click to expand...
Click to collapse
Thank you
it worked like charm!

[ROOT/Recovery] Coolpad Note 5 Nougat and MM any Version

Hello
Here im explaining detail method of rooting Coolpad Note 5 Nougat/Marshmallow.
YOUR WARRANTY IS NOW VOID
IM NOT RESPONSIBLE IF YOU HARD/SOFT BRICK YOUR MOBILE.
Step:1 Enable USB Debugging
*If you have already enabled, then skip this step. Otherwise follow this,,,
- First of all Go to Settings>About Phone
- Then you see "Build Number"
- Click on Build number 7 times (screenshot)
- Now developer options is enable
- Open Settings>Developer option
- Then find USB Debugging, and Enable it
- Done
Step:2 Root and Install Magisk Manager
- Connect Your mobile to PC, and Select "Transfer files" mode
- Now download this Package and Extract on Desktop >>
*transfer recovery folder from zip to your mobile internal storage
- Install Magisk Manager, and openrp.apk from apk folder
- After both installed, open "openrp app". Then restart your phone.
- After restart, disconnect and reconnect usb cable, and choose "Transfer Files" mode
- Now open cmd.bat file from adb folder inside extracted zip.
- Now black window will appear.
- First type "adb shell" and hit enter
- It will show dialogue box on mobile about ADB USB Debugging, click on allow this computer and ok. (screenshot)
- Now you see on computer that "CP3600I:$" printed on that black cmd screen.
- Ok. Close that cmd.bat screen and re open it.
- Type "adb remount" and hit enter
- Type "adb push magisk /system/bin" and hit enter
- You see that some KB/s was transferred.
- Now Type "adb shell" and hit enter
- You see "CP3600I: #" so If you see "#" character then it means you are root.
- Now type "magisk su" and hit enter
- Then you can press "CTRL+C"
- Then type "audioelectric start" and hit enter
- Then type "audioelectric setDM" and hit enter
- Open Magisk Manager app. Since that apk is old version you will see UPDATE on magisk app screen
- Update magisk and reopen it, You see "INSTALL" button, click on it
- You see magisk***.zip to Install, so Click on "Direct Install (recommend)" option.
- After it will download zip, and took 3 minute to make root permanent. (screenshot)
- After reboot, Open Magisk manager app and you see its completely rooted your mobile
Step:3 Install Recovery
- Install "Flashify" app from Playstore
- Open it and Backup your current Kernel and Stock recovery
- Now go to Flash tab and choose "Recovery Image" (screenshot)
- Select "Choose files", and navigate recovery.img file from that recovery folder from zip file (previously extracted in step-2)
*if you are marshmellow user then select--twrp-marshmellow.img
*if you are nougat user then select--twrp-nougat.img
- Flash and reboot
- After reboot it will open twrp.
- Again reboot your phone so you see home screen.
*However this tutorial is simple, many new people dont know or understand how to root. so i wrote step by step.
*If you cant able to root, then you did not follow those steps correctly. So read/follow it carefully.
*Coolpad Note 5 Users/Dev group on Telegram >> https://t.me/joinchat/JBAXXBGIoLRlSoD3Zrscyw (pls Join this)
**Credit:
TonyStark (for root method)
Kuber (for recovery)
Amit
I bricked my phone when I updated the magisk app and install the updated zip . My device was stuck on bootloader. I had to flash stock .
Please tell how to unroot
No VoLTE option
Hello everyone,
I flashed my phone using YGDP with custom ROM 7.0.210.p0.161109.cp 3600i, ota v210, about 3 months back.
Recently, I observed that the VoLTE option is not appearing the Network setting of JIO. Also, I am not able to make or receive calls.
Tried almost everything, checked *#*#4636#*#* for Phone Information and setting the LTE network but that doesn't work.
Can anyone help me out?

[GUIDE]Installation of LineageOS 14.1 in Lenovo Vibe B A2016b30 dual sim al732row

Instructions for Unlock bootloader, Root and Installation of LineageOs 14.1 in Lenovo Vibe B A2016b30 dual sim al732row variant by lexiyuri
Credits to: getdroidtips, EduardaMonteiro and CarlosArriaga
Necessary files are uploaded in my androidhostfile space
MTK Drivers:
https://androidfilehost.com/?fid=4349826312261627234
https://androidfilehost.com/?fid=4349826312261627236
Minimal ADB and TWRP 3.1.1.0 Recovery:
https://androidfilehost.com/?fid=4349826312261627232
Stock ROM for Lenovo Vibe B (just in case) of:
https://www.androidfilehost.com/?w=files&flid=303573
Lineage OS 14.1 ROM (Nougat 7.1.2) :
https://androidfilehost.com/?fid=4349826312261627242
SuperSU Root:
https://androidfilehost.com/?fid=4349826312261627240
Gapps (choose ARM 7.1 Stock package):
download from https://opengapps.org/
Make a entire backup of your device, syncing Google and WhatsApp accounts before doing something.
First part: Unlocking bootloader and installing TWRP 3.1.1.0 recovery.
0. Install necessary MTK Drivers from my uncompressed file.
Windows XP to 8.1: uncompress files, and follow on screen instructions
Windows 10 enforces driver signatures by default. This can be disabled to install drivers that are not digitally signed. Use the following steps to disable driver signature enforcement.
Click the Start Start menu and select Settings.
Click Update and Security.
Click on Recovery.
Click Restart now under Advanced Startup.
Click Troubleshoot.
Click Advanced options.
Click Startup Settings.
Click on Restart.
On the Startup Settings screen press 7 or F7 to disable driver signature enforcement. Your computer will restart and you will be able to install non-digitally signed drivers.
Install your mtk unsigned drivers. In this point dont restart computer again. After finishing all the following steps, you can restart your computer again, and the driver signature enforcement will be re-enabled.
Note: Windows XP/7/8 users don't need to do this.
1. Uncompress and pick the minimal adb and twrp provided from the zip file.
Alternatively, you can Download Minimal ADB tool from https://androidmtk.com/download-minimal-adb-and-fastboot-tool
or Download the full setup Android Studio from its official source https://developer.android.com/studio/?gclid=EAIaIQobChMIpdiIlpfh5QIVks13Ch2bUw8REAAYASAAEgJW9PD_BwE
Note: please dont forget do a complete backup of your data before start!
2. In your Lenovo Vibe B, enter Settings and Enable Developer Options:
Settings -> About Phone -> Tap on the Build Number around 7-8 Times until you see a message "Developer option enabled"
Now, you need to enable the OEM Unlock. Go to Settings -> Developer Option and Enable OEM Unlock. Just as simple as you hear!
3. Go to the folder you uncompressed the Adb tools.
Open a command tool right there (CMD or powershell). After that, turn off your phone.
Now press and hold power and volume up button keys at the same time and you'll see three options: Fastboot mode, Normal mode and Recovery mode.
Confirm Fastboot mode pressing Volume up until you point/reach to the fastboot option and confirm pressing volume down to enter, wait for the fastboot message in your phone. Now, connect your phone to the pc using an good usb cable.
4. Type in the cmd screen
Code:
fastboot devices
command and check if the phone is being recognized. This command list the connected devices.
If your phone serial number shows up everything is fine, but if the phone serial number doesn't appear, you must reinstall mtk drivers or choose another usb cable.
5. Check the unlock oem
typing the command
Code:
fastboot oem unlock
and press enter.
Alert: This procedure will erase your data and reset to the default configuration. Be careful! Check unlocked oem confirmation message on your phone screen.
6. Now is the moment of install the TWRP recovery.
To flash, type the following command in the cmd window:
Code:
fastboot flash boot boot.img
Press enter and wait for a confirmation message.
Code:
fastboot flash recovery recovery.img
Press enter and wait for a confirmation message.
7. Turn off the phone. Press and hold power and volume up button keys at the same time and you'll see three options.
With the volume up key, point to the Recovery mode option and confirm with the Volume down key. Wait a little and now you are into twrp 3.1.1.0 recovery. In the finishing touches, configure the twrp recovery and choose power off option.
Second part: install LineageOS 14.1, Gapps and SuperSu to the Lenovo Vibe B
8. Uncompress the LineageOs folder and copy to an external SD the Lineage Os, Gapps and SuperSU zip files.
9.Turn off your phone, pull out the battery, insert your microSD to the phone. Turn on your phone and start it in recovery mode just as stated before in step 7. Now, you are into TWRP
10. Do a wipe in order to delete the Stock rom. Tap Wipe option, then choose advanced wipe and pick the following ones:
Code:
Dalvik /ART Cache
System
Cache
Data
Confirm the wipe option swiping to the right and wait the confirmation message. Press back option and return to the main twrp window
11. In the main twrp window, tap the Install option, locate your microSD as externalSD tapping in the select storage to activate the external SD. Now search the files into the SD, pressing in the "up a level" zone and after you reach it, install the following things in the exact order:
Choose the Lineage OS 14.1 Rom zip file (swipe to confirm) and wait. Dont restart the phone.
After that, choose the Gapps zip file, swipe again to confirm and wait.
Finally, choose the SuperSu zip file included in the folder, do a swipe, wait.
If you want, its possible install all the zip files as a bunch using the "add more zip option" that twrp offers to you, but I prefer do it each one by one.
12. Do a final wipe choosing "wipe Dalvik and Cache".
13. Now choose the restart/reboot option. Wait for the phone initial setup (around a couple of minutes)
14. Configure the phone with your android account preferences. install your favorite apps, sync your info, etc.
15. Configure the SuperSU, install it, and verify the root with the Root checker app (you can found it in the Play store) and you are done!! Enjoy!!

[GUIDE][UNLOCK][ROOT] How to unlock bootloader, flash LineageOS 20 ROM and root Xiaomi Pocophone F1

This guide is for those who still own a functional Xiaomi Pocophone F1 which released back in 2018, and still want to get more "life" out of it since Xiaomi will unlikely offer anymore system updates. Shout out to @Retrial for the numerous amounts of resources he's made available online and @bgcngm for his contribution by providing the latest installment of LineageOS 20.
Now, throughout this guide, I have linked the page or post based on information I gathered to put this guide together in order to credit that person instead of having to name drop them individually. These are fully detailed instructions to make it easier for newbs.
I've spent the time figuring all of this stuff out so hopefully you won't have to. PLEASE DO NOT PM ME FOR HELP. REPLY TO THIS GUIDE BELOW, THANKS. NOW LET'S BEGIN!!!
1. Since the release of this device, Xiaomi has switched up their bootloader unlocking process so with that being said, these instructions are being laid out on the premise that the bootloader to your device has already been unlocked so if you need further assistance accomplishing this task, please refer to this guide I made previously that breaks down the process.
2. Once the bootloader is unlocked and after the device reboots for the first-time prompting the initial setup, power off device and put it in fast boot mode (Vol down + Power button).
3. Download the latest version of ADB Installer. Setup Fastboot:
a. Run the ADB setup file, and answer each of the following questions accordingly followed by the 'Enter' key:
"Do you want to install ADB and Fastboot?" type Y
"Install ADB system-wide?" type Y
"Do you want to install device drivers?" type N
After completing the installation, you should see the ADB folder located in "C:\".
b. Ensure USB Debugging is already enabled on your device prior.
c. Download and install the latest Xiaomi USB Drivers for your PC, connect the device to the computer via USB cable, and confirm that your phone shows up recognized as "Android Bootloader Interface".
NOTE: If you experience the following error: "Windows encountered a problem installing the drivers for your device – Android ADB Interface... The hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering."
To counteract this issue, it's necessary to 'disable driver signing enforcement' in Windows to install Unsigned Xiaomi drivers:
Hold down the Shift key while accessing the Start menu to restart your PC.
Once the "Choose an option" screen appears, go to "Troubleshoot" –> "Advanced options" –> "Startup Settings" –> "Restart".
After your PC restarts, select "7" for startup setting "Disable driver signing enforcement".
d. Launch "Command Prompt" on your PC and run the command:
cd C:/adb
To show a list of devices (including your phone) connected to your PC, enter the command:
fastboot devices
4. Download the TWRP recovery file by REIGNZ v2 and here [twrp-beryllium-v3.7.0-A12-V2.img] and copy it into the ADB install folder.
NOTE: Boot loop after updating LineageOS via TWRP recovery
NOTE: "Press any key to shutdown" error while in fastboot mode:
This is due to Windows automatically installing Kedacom Device Driver when using a Ryzen PC. No matter how many times you install drivers, your PC will install this driver again, forcing you to have to resort to using an Intel PC.
NOTE: Use TWRP by REIGNZ based on A9, NOT A12 to flash DFE.
5. Flash custom recovery file in CMD, run commands:
fastboot flash recovery "twrp-beryllium-v3.7.0.img"
fastboot boot twrp-beryllium-v3.7.0.img
NOTE: If receiving error: "FAILED (remote: Requested download size is more than max allowed)", try using a different USB (3.0) port.
6. Your device should've automatically boot into TWRP custom recovery; If a Password Prompt appears, tap "cancel" to enter into the main menu.
a. Go to Wipe –> Advanced Wipe, and wipe just the 'data' partition; click 'Back' to the main menu.
b. Download Disable Force Encryption [by Retrial] (DFE) then copy it to "This PC\POCO F1\Internal Storage\TWRP"
c. Install DFE, "Reboot System" followed by holding the Vol Up + Power button to enter into TWRP custom recovery.
7. Now your device is ready for a custom ROM; Download Poco F1 LineageOS and vendor 13.0 firmware.
a. Since LineageOS doesn't automatically come included with Google Apps [for legal reasons] so you're going to need to download Retrial-NikGApps-19-04-2023 or other equivalents separately.
b. Copy over the ROM files into "This PC\POCO F1\Internal Storage\TWRP": the vendor 13.0 firmware, the LineageOS build, and the Google Apps downloaded earlier.
c. Start by installing the vendor firmware followed by the LineageOS file, and the Google Apps.
d. Lastly, clear the "Cache & Dalvick" and "Reboot System" back to Android.
NOTE: Do NOT forget about installing the vendor firmware to prevent further issues.
8. LineageOS 20 based on Android 13 should now be fully functional.
a. Your Mi Account must be added to your Mi Settings
Wipe –> Format Data
9. Go to Settings –> About phone –> Scroll down to "Build number," tap it 7 times to become a "Developer".
a. Go "back" –> System –> Developer options –> Scroll down to "Verify apps over USB" and disable it then scroll down to "Default USB configuration" and change it to "File Transfer".
10. Now, you will need to install Magisk by using the Patch Image method.
a. Pull down the Notification Bar from the top of the screen and change "Charging this device via USB" to "File Transfer".
b. Open Lineage OS build [e.g., "lineage-20.0-20230422-nightly-beryllium-signed"] and copy "boot.img" to the phone's internal storage (e.g., "Download" folder).
c. Download the latest version of Magisk (Magisk v26.1) and copy it to the phone's internal storage and use the native "Files" app to install the apk.
NOTE: Magisk binaries (ZIP) are included within Magisk Manager APK file and you don't have to download it separately.
d. Launch Magisk from the app drawer and go to "Install" under Magisk –> "NEXT" (beside "Options") –> "Select and Patch a File" (beside "Method") select the "boot.img" you copied internally –> "LET'S GO".
e. Copy the generated patched file from your device and place it into the ADB folder; NOTE: you may have to unplug and replug then reconnect the USB cable for the device to refresh itself in order to reveal the newly generated file. Flash it via fastboot by running the following commands:
cd C:/adb
fastboot flash boot boot.img
f. Reboot into the new ROM and voila!
fastboot reboot
g. Use an app such as Root Checker or BusyBox Checker to confirm root status.
h. To bypass/restore SafetyNet validation, open the Magisk app, go to Settings (cogwheel icon) and enable MagiskHide (instructions).
i. To check the device's SafetyNet status, use an called SafetyNet Helper Sample or SafetyNet Checker in the Play Store.

Categories

Resources