DESCRIPTION:
Hey guyz..... Me Hassan Mirza from Pakistan
Today am here with a new thread and I Have a good news for you....
As you know, The other methods are old now and also, in Nougat, there is root which needs to mount system each time you need to use it,,, so Today, your system mount and root problem solved... Phh or Magisk, you choose
Releasing Elite Kernel v2 ported from P9 Lite
Its PreRooted, System RW available for all time, Titanium backup works perfectly and Magisk work too for it to hide root
With this you can flash anything and see in SYSTEM ! VIPER...adaway no systemless...etc...
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
Install:
1.) Download this Elite Kernel for Honor 8 CxxB36x v2
2.) Put in Root of SD Card.
3.) Flash this in Latest Recovery for Nougat.
4.) See if Superuser app installed, if not install Phh Superuser from google play.
5.) And you are ROOTED.
The file it's boot.img is based upon L04-C567B360, modded and signed for boot.
Its Adviced to remove pattern Lock and Fingerprint Lock before installing.... just adviced,,,
If you like, donate
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Changelog in 2nd post...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01 for doing all this
@phhusson for his wonderful work of making Phh superuser
@Telperion as he got my attention for doing this
Status:
Status: Stable
Stable Release Date: 2017-04-27
Created on: 2017-04-04
Last Updated on: 2017-04-27
CHANGELOG:
2017-04-04 Elite Kernel for B3xx by [email protected] v1: Initial release,
2017-04-27 Elite Kernel for B3xx by [email protected] v2: The Most wanted MagiskSU released with Proper Support,,, Use with Cautions...
This is all really good stuff.
Thank you for sharing your work
John
Guyz if this kernel didnot working, booting for you or crashing your settings app,,, send me the boot.img file of your own variant of Honor 8... I will see into it...
awesome! Thanks for your hard work on this! Will this work with the LineageOS build that @surdu_petru and team have been working on?
I think no.... Like Lineage 14.1 for P9 lite,,, we need to go to MM to install it... So lineage kernel according to my guess, works on MM based roms so Elite Kernel wont work with it :/
HassanMirza01 said:
I think no.... Like Lineage 14.1 for P9 lite,,, we need to go to MM to install it... So lineage kernel according to my guess, works on MM based roms so Elite Kernel wont work with it :/
Click to expand...
Click to collapse
So this doesn't work on nougat? I guess the support for magisk tells me it doesn't. Bummer.
If the kernel is based on B360 then it should work with N and not MM. The Lineage rom right now is using the stock N kernel with no changes to it. They are not building a N kernel inline with Lineage as there's no source code out for it.
I guess my question is, would it be possible to flash Lineage, and then flash this kernel over it?
my Kernel is on Nougat based ROM not on MM but someone should try it on lineage too.....and tell the result...
@HassanMirza01 -- kernel works and PHH SU works and can R/W /system/. One issue I noticed however is that "Revoke USB Debugging Authorizations" has disappeared from my Developer menu. On the Honor 8 with Nougat I frequently have to revoke and reset authorizations to get it to work properly. I was able to get it working again by flashing the stock boot and rooting with the linked zip.
Magisk, however, crashes the phone on installation attempt, even with SELinux set to permissive. It causes a reboot when 'setting up the environment' either through Magisk Manager or TWRP. It appears that the P9 Lite kernel must have proper loop support whereas the Honor 8 still doesn't even with tweaks. It was speculated that since on the P9 Lite Magisk wouldn't work on Nougat, but on the P9 Lite after flashing this kernel and flashing Magisk in permissive SELinux mode, it installed successfully, that a similar path might work on the Honor 8. Then again, perhaps something is workable.
Either way, thanks for looking into this. :good:
https://drive.google.com/file/d/0B0zE1Kk8sIB6eVplODFjaTh4Q0U/view?usp=drivesdk
i will release a next build soon for some bugs fixes.... also, magisk proper support is coming soon,,,
Here's a log of what happens when I try to flash Magisk.
bro send me recovery log,,, i cant understand the one you send above...
Here is a zipped boot.img for honor 8 frd-l19 C432b360
HassanMirza01 said:
bro send me recovery log,,, i cant understand the one you send above...
Click to expand...
Click to collapse
Unfortunately Recovery crashes before it can write what happened to the log. That kernel crash log up above is the closest info we can probably get.
I attached the TWRP log though anyway.
Telperion said:
Unfortunately Recovery crashes before it can write what happened to the log. That kernel crash log up above is the closest info we can probably get.
I attached the TWRP log though anyway.
Click to expand...
Click to collapse
Also another log, this one shows the beginning stages of the flash and where the crash happens. (Search Magisk in the text file)
Expected release date: when kernel source comes out.
Just to makes this clear, we have no proper loop support and thats why magisk will not work (just take the dmesg from the user above as example, it tries to create a new loop volume and directly crashes ..)
Regards
svardman said:
Here is a zipped boot.img for honor 8 frd-l19 C432b360
Click to expand...
Click to collapse
Bro i didnot find the boot.img in your provided zip... Just check the size of your uploaded zip...
HassanMirza01 said:
Bro i didnot find the boot.img in your provided zip... Just check the size of your uploaded zip...
Click to expand...
Click to collapse
My Bad, gonna fix it later on today,
Does the new version of TWRP thats released help this ?
I know i was finnaly able to just Flash TWRP > flash SUPERSU 2.79 to root and thats it ! no pre modfiied boot.img needed . perfectly working now
Related
Hi tastynOOgat Users,
This is the continuation of NCSROM called tastynOOgat and is based on Android 7.0.
The builds always contain a complete clean and refreshed state, before uploading, if the thime give the possibility to do that.
Changelogs: planned, will store only links here for feature, to not fill too much in my threads.
tastynOOgat v2.0 build: B389
- not prerooted, choose what in your mind if SuperSU oder Magisk
- busybox
- deodexed / zipaligned
- Playstore 8+
- removed /updated some apps
- bugs? you tell me
Download L19
Download L09 Patch
tastynOOgat v1.0 build: B381
- not prerooted, cause of bugs by pack boot.img, use SuperSU for EMUI5 instead. Not forget to use latest TWRP, or it won't work.
- latest Busybox
- Deodexed + Zipaligned
- No Bloatware
- Playstore 7+
- removed google apps
- no bugs
Download
tastynOOgat Pre: B380 adaption of B381 cause no ota yet to update
- Stock kernel, verity removed, root by yourself
- Changelog as B381
Download
Userguide:
Marshmallow
Update from any Custom ROM or old firmware to latest MM firmware through ota or dload to gain the Nougat upgrade, theres no other methods than this.
Unlock bootloader and flash twrp for N 3.1......
resume right away with point 1
Nougat
1. A Custom ROM always needs the latest twrp + firmware installed before flashing to bypass driver changes made by huawei or it can cause errors or bootloops. It might working on some versions until they change something under the hood, then its necessary to update with dload.
2. Go to twrp, wipe -> Adwanced Wipe
3. Wipe this: Cust, Data, Internal Storage, System, Vendor, Product and Version to have a clean start
4. Flash the firmware you have downloaded.
5. Don't worry about mountencrypt error, it all works well.*
6. Flash SuperSU after you find here
7. Done
*Huawei binarys working a bit different than we use, but we can't avoid them until we have a better solution.
XDA:DevDB Information
[FRD][L09/19][C432][7.0] tastynOOgat v2.0 (07.13.17), ROM for the Honor 8
Contributors
dkionline
ROM OS Version: 7.x Nougat
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2017-07-13
Current Beta Version: B389
Beta Release Date: 2017-07-13
Created 2017-04-12
Last Updated 2017-07-17
dev 01
dev 02
thanks for your work
Does this rom have any features not on stock ?
nyc job tysm
Hi any installation instructions? I tried flashing the zip using TWRP over my stock unrooted L09C432B380 but it boot loops at the Honor animation.
Anonshe said:
Hi any installation instructions? I tried flashing the zip using TWRP over my stock unrooted L09C432B380 but it boot loops at the Honor animation.
Click to expand...
Click to collapse
Hey, the thing is you need to update to L09C432B381.
Propably upgrade or fullwipe. In that state you won't see changed build.
DeathKX said:
Hey, the thing is you need to update to L09C432B381.
Click to expand...
Click to collapse
To be fair nobody on the forum managed to flash the B381 yet.
How stable is this rom and can this be used as dailydriver yet?
SpeaqerDev said:
How stable is this rom and can this be used as dailydriver yet?
Click to expand...
Click to collapse
From what i can tell you need to be on 381 in order to use this ROM.
None of us have 381 so no body is able to use or test this as yet
you can also add this mod
https://forum.xda-developers.com/honor-8/themes/mod-camera-mod-enhanced-camera-jordon-f-t3574566
johnhux7 said:
From what i can tell you need to be on 381 in order to use this ROM.
None of us have 381 so no body is able to use or test this as yet
Click to expand...
Click to collapse
Lol, why would someone release ROM without testing it (I assume he hasn't cause anyone haven't been able to install the b381)
SpeaqerDev said:
Lol, why would someone release ROM without testing it (I assume he hasn't cause anyone haven't been able to install the b381)
Click to expand...
Click to collapse
I really don't know.
It seams a bit pointless at the mo.
We have a ROM that nobody can use
You can test it, but i dont know, if it fits with the settings of B380. because of drivers or other changes.
dkionline said:
You can test it, but i dont know, if it fits with the settings of B380. because of drivers or other changes.
Click to expand...
Click to collapse
From what i can see this is not working on 380.
U will have to wait till 381 is released for us to be able to use it
I can instal in FRD-AL00
???
aureliomilitao said:
I can instal in FRD-AL00
???
Click to expand...
Click to collapse
No, sorry.
What is the point of this rom if nobody can use it?
ATTENTION
if you flash this on aqua you will have an aqua without fingerprint reader and without sdcard
DOWNLOAD
(newest: aosp-caf-n-mr2-20170505-2337-libra.zip)
HOW TO FIND BOOTLOADER VERSION
You get Nougat bootloader if you update to MIUI Nougat or flash the Nougat firmware zip @AndropaX made.
After you update to Nougat bootloader you need to request unlock permission from Xiaomi.
(if you can't remember doing any of this then you have Lollipop bootloader)
INSTALL
0. If you are on Lollipop bootloader, flash latest lollipop firmware. (you don't need to do this step each time you flash the ROM, only once).
1. Reboot to TWRP.
2. Wipe cache, dalvik cache, data and system.
3. Install ROM.
4. Install 7.1.x Gapps for ARM64.
5. If you are on Nougat bootloader, install nougat-bootloader-compatible kernel in the boot partition.
6. Reboot.
Root is not included! You need to flash Magisk or Systemless SuperSU.
FEATURES
hardware buttons customization
system ui tuner
You can request features in the comments! We'll be adding the ones we consider useful.
BUGS
edge tap (won't fix)
the included camera is a bit problematic, I suggest using Google Camera 3.2
XDA:DevDB Information
AOSP, ROM for the Xiaomi Mi 4C
Contributors
Cozzmy13, mosimchah
Source Code: https://github.com/DemonTeam
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop bootloader
Based On: AOSP
Version Information
Status: Alpha
Created 2017-04-30
Last Updated 2017-05-05
Reserved
Reserved
Screenshots
My hero! If I'm on nougat bootloader how do I downgrade to lollipop? Flash the zip mentioned in the op?
solis_f said:
My hero! If I'm on nougat bootloader how do I downgrade to lollipop? Flash the zip mentioned in the op?
Click to expand...
Click to collapse
Updated first post with nougat-bootloader-compatible kernel.
Finally, google play edition mi4c. Thanks for your work bro, really great work
Really exciting to see! and love that you're making it aqua compatible too thanks bud, might have to give this one a try. Let me know if you need anything from the aqua platform!
On the request front - same thing every aqua user will ask for the same thing SD support and if at all possible fpr - understandable if not possible but got to be worth asking!
Thanks again for all you do for the community you guys are superstars!
Thank you!!! Using this rom + SuperSU + a.r.i.s.e sound mode and everything is working perfect (for now).
Only feature missing for me is the advanced reboot menu ! Otherwise a great job, even camera seems good
solis_f said:
Only feature missing for me is the advanced reboot menu ! Otherwise a great job, even camera seems good
Click to expand...
Click to collapse
Will be added next release (hopefully that's tomorrow).
does magisk / supersu included?
Hi guys, what the gapps we needed? 7.1 on ARM64 platform right?
faighter said:
Hi guys, what the gapps we needed? 7.1 on ARM64 platform right?
Click to expand...
Click to collapse
yes,right
Im nougat with unlocked bootloader
I followed all the steps and no.5 in the twrp asked me where to install the image
1 system
2 boot
3 Recovery
Which option to choose?
Thank you
Install kernel before gapps or after?
How about performamce and smoothness of this rom compared to AICP?
hhanu said:
Im nougat with unlocked bootloader
I followed all the steps and no.5 in the twrp asked me where to install the image
1 system
2 boot
3 Recovery
Which option to choose?
Thank you
Install kernel before gapps or after?
Click to expand...
Click to collapse
Before, and boot
IcyGlacial said:
does magisk / supersu included?
Click to expand...
Click to collapse
No, that's why flashing Magisk is an extra step in the first post.
HUGE thanks.
Gonna be my daily driver.
Is it working fine until now, guys?
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage OS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Do not copy my works or steal fixes without giving any credits..or gather it by yourself if you have the right knowledge.
Downloads
03/05/2020
lineage-15.1-20200503-UNOFFICIAL-hi6250.zip
Fix mostly everything.
SPL: April 2020.
Note
Special thanks to XDA-Developers for putting this rom to the news feed, it was a pleasure.
Contributors
haky 86, phhusson
Source Code: https://github.com/hak86/device_phh_treble
kernel GPL: Due to Project Treble, my roms doesn't use any pre-compiled kernel because it's using the stock kernel that can be found in UPDATE.APP's kernel.img.
https://github.com/hak86/android_kernel_huawei_hi6250
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.0.0 PRA-LX1 C432B322 8.0.0(C432log)
Version Information
Status: Stable
Current Stable Version: 8.1
Stable Release Date: 2018-04-06
Created 2018-04-06
Last Updated 2018-06-16
Reserved
Here the screen shots in attached files
I have problems booting your ROM. Im running atm on my pralx1 (rebranded to cn) AOSP 8.1. This Treble rom is booting without problems. I installed this lineage img via fastboot and twrp but after the warning screen the device will not boot the rom and restarts the device everytime. Then i flashed the aosp 8.1 img again with twrp and it booted without problems. Im also not able to revert to EMUI 8 btw. Same problem and idk what is wrong.
-----------------------------------------------------------------
Edit: v.08.04.2018
Solved. Magisk caused the problem. Only way (and fastest) to solve it, was to load a backup from the same device on which is this Lineage ROM already booting (thx to @Striike) or just no Magisk installed before.
(I tried to install Magisk after booting up this ROM and it caused the same booting issue).
Haky, good job on being on the news feed! Congratulations!
All hail @haky 86
Our little PRA, one of the first devices having Treble Lineage, I am really impressed.
MIcHiJK said:
I have problems booting your ROM. Im running atm on my pralx1 (rebranded to cn) AOSP 8.1. This Treble rom is booting without problems. I installed this lineage img via fastboot and twrp but after the warning screen the device will not boot the rom and restarts the device everytime. Then i flashed the aosp 8.1 img again with twrp and it booted without problems. Im also not able to revert to EMUI 8 btw. Same problem and idk what is wrong.
Click to expand...
Click to collapse
install it same like you install aosp 8, the most important to not wipe system partition of emui8, it's a mandatory to boot. also format data
CarlosAG10 said:
All hail @haky 86
Our little PRA, one of the first devices having Treble Lineage, I am really impressed.
Click to expand...
Click to collapse
I already fix signal plus switching between networks and NFC(partially for some noisy reason won't enable) then I'll release AOSPA Pa Treble-enabled
haky 86 said:
I already fix signal plus switching between networks and NFC(partially for some noisy reason won't enable) then I'll release AOSPA Pa Treble-enabled
Click to expand...
Click to collapse
The fingerprint on a p9lite2017 would work ?(i know p8 and p9 2017 the same internals almost)
Is there an External SDCard problem?
YoussefR said:
Is there an External SDCard problem?
Click to expand...
Click to collapse
same as aosp. I will check the issue once fix the NFC (already working on it)
Well done man. Hope to get stable oero soon to try it out...??
Reserved
07/04/2018:
https://basketbuild.com/filedl/devs?dev=haky86&dl=haky86/HuaweiP8Lite2017/Roms/Android-8.0/lineage-15.1-treble-prague-07042018.tar.gz
ChangeLogs:
07/04/2018:
fix signal.
fix switching between networks.
Warning issue about mismatch vendor image, this bug appear on all treble devices as they told me, the only to see if to fix is by waiting the next update of emui 8 for our hi6250.
sdcard it's work but after some reboot.
how to flash gapps?
haky 86 said:
07/04/2018:
https://basketbuild.com/filedl/devs....0/lineage-15.1-treble-prague-07042018.tar.gz
ChangeLogs:
07/04/2018:
fix signal.
fix switching between networks.
Warning issue about mismatch vendor image, this bug appear on all treble devices as they told me, the only to see if to fix is by waiting the next update of emui 8 for our hi6250.
sdcard it's work but after some reboot.
Click to expand...
Click to collapse
Already? Legend!
jeuxtype said:
how to flash gapps?
Click to expand...
Click to collapse
I will include in next build for both gapps and su probably nfc fix too.
Did you make a TWRP for Oreo on this device?
Great Work! Just would like to know if there's a way to get the stock camera on this Rom.
MIcHiJK said:
I have problems booting your ROM. Im running atm on my pralx1 (rebranded to cn) AOSP 8.1. This Treble rom is booting without problems. I installed this lineage img via fastboot and twrp but after the warning screen the device will not boot the rom and restarts the device everytime. Then i flashed the aosp 8.1 img again with twrp and it booted without problems. Im also not able to revert to EMUI 8 btw. Same problem and idk what is wrong.
Click to expand...
Click to collapse
hey ,can you tell me how you installed oreo? i have rebranded my phone but i cant find a working guide...
Striike said:
Great Work! Just would like to know if there's a way to get the stock camera on this Rom.
Click to expand...
Click to collapse
camera is fully works same as stock, I will add the port of Huawei Camera but in next build, actually I'm trying to include gapps and su
mateiocristi said:
hey ,can you tell me how you installed oreo? i have rebranded my phone but i cant find a working guide...
Click to expand...
Click to collapse
follow this, first you must to convert to nougat al00 then update b220 (I did like 3-4 times to fix test-keys)
https://forum.xda-developers.com/p8.../guide-holy-emui8-treble-rom-pra-lx1-t3773216
Why not support emui 5.x upgrade? Is the source code problem?
android oreo 8.1 firmware leak for alldocube power m3 ,guys who own the pad have a try!and give a bug reply post.
alldocube power me oreo 8.1 firmware(0621)
a offical oreo 8.1 firmware with google play for power m3:http://www.mediafire.com/file/qev79...2B32.Neutral.8.1.V01.01.20190118user.zip/file
The firmware is working. One problem: after installation in TWRP package OpenGapps the system crashes. I couldn't find the replacement option (arm64, 8.1). Energy saving is good. Root access - Magisk.
P.S.: Build OpenGapps UNOFFICIAL is suitable for installation and works after components are updated (for example, with Yalp Store or Aurora App Store, F-Droid & etc.)
P.P.S.: If someone decides to install the firmware - must first make a backup of the NVRAM!!! Because the firmware will have to be installed with formatting and the nvram section will die. After flashing the firmware, it must be restored from the saved backup.
For me I got Problems with the display.. Its kinda over saturated.
If someone can explain the rights step to flash this rom would be nice. I cant install twrp over the Flash tool i used this for flashing twrp:
https://forum.xda-developers.com/android/general/cube-power-m3-tablet-twrp-img-t3772179
Hai_Duong said:
For me I got Problems with the display.. Its kinda over saturated.
If someone can explain the rights step to flash this rom would be nice. I cant install twrp over the Flash tool i used this for flashing twrp:
https://forum.xda-developers.com/android/general/cube-power-m3-tablet-twrp-img-t3772179
Click to expand...
Click to collapse
Take my version TWRP specifically for Oreo (the same in Russian how to install and patched Magisk boot.img to obtain root-rights): hire.
The saturation of the screen is comfortable for me, Occasionally settings of installed programs fly off.
TWRP Oreo
patched boot
config.gz in /proc fs
wangyiling said:
android oreo 8.1 firmware leak for alldocube power m3 ,guys who own the pad have a try!and give a bug reply post.
alldocube power me oreo 8.1 firmware(0621)
Click to expand...
Click to collapse
running linux kernel was configured to have /proc/config.gz. The configuration for this is found in
General setup
[*] Kernel .config support
[*] Enable access to .config through /proc/config.gz
with oreo 8.1...
treble checker reports device to be supported by Project - only with A-partition.
did anyone tried out to switch to GSI image?
cmarxmeier said:
tried out to switch to GSI image
Click to expand...
Click to collapse
Theoretically, should be suitable all the firmware from this theme and some of this. But we need TWRP support Treble, if I understand correctly (I tried the project on another device, everything was already done).
Treble works. As an experiment, I launched Omni 8.1. Started, but gives error 'com.android.phone has stopped'. The system image installed through fastboot (my TWRP isn't able to install to the system partition). The bootloader must be unlocked.
AOSiP Pizza Alpha [EXPERIMENTAL] - wi-fi, sound work, phone don't.
[9.0.0] ArrowOS (Android 9) - very quite good, but again the phone module. Need a system.img way to rebuild, or looking for a fix. In the firmware theme this is the main question. And in general, I liked the firmware, fast response and fast touch interface.
https://megaup.net/6u3i/Y5352.CUBE.T1001.MID.2+32.Neutral.8.1.V01.01.20181210user.zip
also some one can try this new power m3 8.1 firmware .
it's not beta .
wangyiling said:
also some one can try this new power m3 8.1 firmware
Click to expand...
Click to collapse
I already have this version installed. The work of the Treble Project checked on it. Firmware international, Google applications available, fixed some bugs. The installation also requires restoring the nvram partition.
Here's an updated TWRP 3.2.1-0 x64 for Oreo with support for the Treble Project (my port from Infinix X571): AFH
ViAlexSt said:
Theoretically, should be suitable all the firmware from this theme and some of this. But we need TWRP support Treble, if I understand correctly (I tried the project on another device, everything was already done).
Treble works. As an experiment, I launched Omni 8.1. Started, but gives error 'com.android.phone has stopped'. The system image installed through fastboot (my TWRP isn't able to install to the system partition). The bootloader must be unlocked.
AOSiP Pizza Alpha [EXPERIMENTAL] - wi-fi, sound work, phone don't.
[9.0.0] ArrowOS (Android 9) - very quite good, but again the phone module. Need a system.img way to rebuild, or looking for a fix. In the firmware theme this is the main question. And in general, I liked the firmware, fast response and fast touch interface.
Click to expand...
Click to collapse
ViAlexSt said:
I already have this version installed. The work of the Treble Project checked on it. Firmware international, Google applications available, fixed some bugs. The installation also requires restoring the nvram partition.
Here's an updated TWRP 3.2.1-0 x64 for Oreo with support for the Treble Project (my port from Infinix X571): AFH
Click to expand...
Click to collapse
nice
wangyiling said:
https://megaup.net/6u3i/Y5352.CUBE.T1001.MID.2+32.Neutral.8.1.V01.01.20181210user.zip
also some one can try this new power m3 8.1 firmware .
it's not beta .
Click to expand...
Click to collapse
Firmware brings up DualWifi again - 5GHz stopped working in former version.
EngineerMode.apk seems to be removed from priv-app's in this release - restoring manually from old image did not help - app crashes.
No easy way to set IMEI on device without MTK EngineeringMode.
cmarxmeier said:
Firmware brings up DualWifi again - 5GHz stopped working in former version.
EngineerMode.apk seems to be removed from priv-app's in this release - restoring manually from old image did not help - app crashes.
No easy way to set IMEI on device without MTK EngineeringMode.
Click to expand...
Click to collapse
for imei restore ,i think mtk sn write tool will do some help
wangyiling said:
for imei restore ,i think mtk sn write tool will do some help
Click to expand...
Click to collapse
mtk sn write tool did the job. - shows up with correct IMEI and VoLTE 4G.
patched boot.img with magisk
- works like a charm so far.
Looking forward to check USB-C Port with Icy Box to get Ethernet/HDMI device listed on USB-Bus.
wangyiling said:
https://megaup.net/6u3i/Y5352.CUBE.T1001.MID.2+32.Neutral.8.1.V01.01.20181210user.zip
also some one can try this new power m3 8.1 firmware .
it's not beta .
Click to expand...
Click to collapse
Someone does have TWRP recovery for this one? Trying to port old one, but getting buggy rotated recovery...
fraddy91 said:
Someone does have TWRP recovery for this one? Trying to port old one, but getting buggy rotated recovery...
Click to expand...
Click to collapse
Compile yourself by adding the lines:
# TWRP
......
RECOVERY_TOUCHSCREEN_SWAP_XY := true
RECOVERY_TOUCHSCREEN_FLIP_Y := true
Or Phils recovery.
I'm not responsible for any damage to your device of any sort.
By flashing this, you take responsibility of anything that happens.
Process at your own risk!
If you want to check - please make backup. Better to store all partitions.
What works
audio
bluetooth
brightness
call/LTE (mondrianlte)
camera
DRM
OTA
video
wifi
wifi display
What doesn't work
Back camera preview : wrong rotation on preview in default app Fixed build 20221204
SELinux Fixed build 20221130
Instructions:
0. Patched TWRP for FOTA : mondrianwifi / mondrianlte
1. Factory reset if coming from another ROM.
2. Install ROM
3. Install GApps (optionally) [Recommended BiTGApps ARM 13]
4. Install Magisk 25.2 (optionally)
Sources & Changes:
Device tree mondrianwifi
Device tree mondrianlte
Kernel tree
Vendor tree mondrianwifi
Vendor tree mondrianlte
TWRP tree mondrianwifi
TWRP tree mondrianlte
Download:
Downloads: mondrianwifi / mondrianlte
Note to users: I'm not responsible if you brick your tablet. See the disclaimer above.
Contributors
LineageOS team for source code.
@retiredtab for helping make mondrianwifi to work on Android12
@khalvat for its work on porting msm8974 to Android12 (https://github.com/LineageOS-UL)
@pocketrule, @bierma32, @Yxo 6o6uka for willing to test WIFI builds and leaving feedback
@bmwdroid for willing to test LTE builds and leaving feedback
ROM OS Version: 13.0
Version Information
Status: Nightlies
Created 2022-11-27
Last Updated 2023-01-05
THX @phoval for the New LOS 20 Version.
Installed this as update over the Version 20221010 without issue's.
FOTA update notification works .
New build: SeLinux is enforcing
Perfect !!!
Amazing !!
Thank you @phoval !!!
Hello, good job.
Thank you @phoval
Installed and runs smooth. Sound, video & wifi works. Excelled work.
Amazing, the previous versions made my tablet very slow, but this one seems to run well. Great job! Thanks to the developers
@phoval since I've installed the zram_ boot.IMG runs the ROM with out lags and crash's.
Thanks again for your work.
I will update today to the last Version 20221204
cwokel said:
Amazing, the previous versions made my tablet very slow, but this one seems to run well. Great job! Thanks to the developers
Click to expand...
Click to collapse
bierma32 said:
@phoval since I've installed the zram_ boot.IMG runs the ROM with out lags and crash's.
Thanks again for your work.
I will update today to the last Version 20221204
Click to expand...
Click to collapse
my tabelt is still slow, even with this built. i did a factory reset. even my battery is draining extremely.
@bierma32 what is zram_ boot.IMG. can you provide me that file? can i flash it in twrp?
greetz
@chkdsk90
Charge your battery to 100% and try another clean install, format also system and data .
chkdsk90 said:
my tabelt is still slow, even with this built. i did a factory reset. even my battery is draining extremely.
@bierma32 what is zram_ boot.IMG. can you provide me that file? can i flash it in twrp?
greetz
Click to expand...
Click to collapse
Provide logcat.
zram boot img was alpha kernel for test.
The changes are includes since 2nd december build.
how can i flash the patched TWRP? Odin doesn't recognize the twrp file because its a .img file and not .tar
chkdsk90 said:
how can i flash the patched TWRP? Odin doesn't recognize the twrp file because its a .img file and not .tar
Click to expand...
Click to collapse
You can download an official tar file, flash it in odin, reboot to recovery and from there you can update twrp.
pocketrule said:
You can download an official tar file, flash it in odin, reboot to recovery and from there you can update twrp.
Click to expand...
Click to collapse
And why is the link to a patched twrp? What exactly is patched? What is fota?
Sorry for the questions. I only know the Normal twrp. tar file
chkdsk90 said:
And why is the link to a patched twrp? What exactly is patched? What is fota?
Sorry for the questions. I only know the Normal twrp. tar file
Click to expand...
Click to collapse
It's patched for FOTA. A simple internet search reveals, that fota stands for "Firmware Over-the-Air" 😉️ I.e. you can download and update the rom directly from the rom itself. If you (always) download and flash the rom manually / separately, you don't need the patched rom.
One detail: the taskbar at the bottom does not disappear when I open an app, neither the three virtual bottons. Tried all configuration without result. Any hints?
If I get a app not responding message and I hit wait it will repeatedly pop up despite the app responding again (dirty flash). Otherwise first impressions of this rom are good.
Just asking, any plans or chances for mondrianlte to get an A13 build? I've got that device running an unofficial LOS A11 build (the latest OS available for it), and it still has official TWRP support as of today
cwokel said:
One detail: the taskbar at the bottom does not disappear when I open an app, neither the three virtual bottons. Tried all configuration without result. Any hints?
Click to expand...
Click to collapse
Just disable it in system > buttons. It's customization during first setup.
You can enable gesture navigation too.
jacomail95 said:
Just asking, any plans or chances for mondrianlte to get an A13 build? I've got that device running an unofficial LOS A11 build (the latest OS available for it), and it still has official TWRP support as of today
Click to expand...
Click to collapse
If someone can find me one to buy?